cSS3 Q2

2ND QUARTER EXAMINATION FOR CSS 3
NAME: __________________________
DATE:_____________________
SECTION_________________________ TEACHER:
__________________
General instruction: Use blue or black ballpen to answer a given question and avoid unnecessary erasures.
I. Identification: Name the following network problem and troubleshooting tools. Write the letter of you answer
on the space provided. (2pts.)
a. Cable Problem b. Port Faulty c. Traffic Overload d. Obkio e. Software Issue

f. Network IP Issue g. Connectivity Problem h. Protocol Analyzer i. Ping g. software
Issue
________1. Improper configuration of IP addresses and subnet mask and routing IP to the next hop, the source
will not be able to reach the destination IP through the network.
________2. The port or interface on which the link is established does not shut down.
________3. A software application is designed for monitoring network performance and identifies the causes of
common network problems like VoIP.
________4. Compatibility issues and version mismatch, the transmission of IP data packets between the source
and destination is interrupted
________5. If the link is over utilized then the capacity or traffic on a device is more than the carrying capacity of
it.
________6. What is used to connect two devices which can get faulty, shortened or can be physically damaged.
________7. The port or interface on which the device is connected or configured can be physically down or faulty
due to the source host will not be able to communicate with the destination host.
________8. It contains two messages; the data packet is competent to send and it can receive the messages from
the destination IP address.
________9. It sends the ICMP echo request messages with a step-by-step increase in the IP TTL (time to live)
values.
________10. It is the software that intercepts and records the data packet flow between the source and the
destination.
II. Fill in the blanks

1. __________ It is the software that intercepts and records the data packet flow
between the source and the destination.
2. __________ It means the time for the process and is calculated in milliseconds.
3. __________ Allows users to read, write, rename, and delete files in the folder
and its subfolders, but not create new files.
4. __________ It contains trace events for Windows components.
5. __________ It simplifies and automates many of the common troubleshooting
steps and solution implementations for networking troubles
6. __________ is a number that is used to identify a device on the network.
7. __________ is a command used to find out the IP address of a certain network
you are connected to.
8. _________ Used for small networks, implemented by ISP’s for client
subscription.
9. _________ indicates the network portion of an IP address.
10._________ It contains several types of files, including text, Windows Registry,
XML, and others that store additional troubleshooting information.
III. Multiple choice

Directions: Write the letter of the correct answer in a clean sheet of paper.
1. What action should you take, when you are analyzing and diagnosing problem in
a computer system and network?
a. Diagnose c. Testing
b. Examine d. Troubleshoot
2. The following are some of the guidelines for testing configured computer system
and network, EXCEPT;
a. Check the physical connection. c. Check body temperature
b. Verify that you can log in. d. Check network configuration
3. There are three routes to open up system properties. Which one is the quickest?
a. Open control panel in start Menu c. Gpedit.src
b. Sysdm.cpl d. Sysconfig
4. Which of the following is known as physical address?
a. PC Address c. IP Address
b. MAC Address d. URL Address
5. MSconfig.exe is used to troubleshoot startup problems by allowing to disable startup program and services.
What command can be used to find out the IP address of
a certain network you are connected?
a. Ipconfig c. Dxdiag
b. Regedit.exe d. Gpedit.msc
6. It is a Compatibility issues and version mismatch, the transmission of IP data packets between the source and
destination is interrupted.
a. Software Issue c. Tracing
b. NTFS Permission d. Network Testing
7. It is a predefined collection of providers for a specific function, such as file sharing or wireless LAN access.
a. Contributor c. NTFS Permission
b. Network Testing d. Tracing
8. They provide extremely granular control over an object. For each user to whom you want to grant access, you
can specify exactly what they’re allowed to do.
a. connectivity c. NTFS Permission
b. contributor d. Network Testing
9. It is the actual measurement of the network's state of operation over some time.
a. Network Testing c. Contributor
b. Sysdm.cpl d. Connectivity
10. It is a command used to find out the IP address of a certain network you are connected to.
a. Sysdm.cpl c. Connectivity
b. Share d. Ipconfig
III. Directions: Steps in How to Configure Static IP Address in Windows 7 Directions: Fill in the empty box with the
missing steps in Static IP Configuration.
IV. Directions: Steps on How to Configure HOMEGROUP in Windows 7 Directions: Fill in the empty process with
the missing steps in HOMEGROUP Configuration.
V. ESSAY 5pts each.
1. What are the problems you encountered upon doing the setting up computer server?
2. Is there really a need to have a network and hardware inspection? Why? Why not? Defend your answer.
3. Why is it important to know how to share files and folders over the network?,,,

cSS3 Q2

Uploaded by

Copyright:

Available Formats

cSS3 Q2

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

cSS3 Q2

Uploaded by

Copyright:

Available Formats

2ND QUARTER EXAMINATION FOR CSS 3

a. Cable Problem b. Port Faulty c. Traffic Overload d. Obkio e. Software Issue

II. Fill in the blanks

III. Multiple choice

You might also like