Home About Products Mission Quality Contact

About

EXIMAX Company is a leading supplier of Raw Materials and Ferroalloys.

We have experience over two decades in this regard. 

Having at the back of our mind the target to expand our activities globally,
we have obtained worldwide respect and recognition with first-class
customers. Indeed our success is due to this strategy goal:

To provide exceedingly preeminent quality products aiming at the best

satisfaction, and care and cater to our customer’s needs and requests.
Therefore, by strictly following our goal we have managed to build a
reputation concerning consistency, competitiveness, and reliability.

Important is the fact that we look at our customers’ demands because we

know what they demand:
 quality
 competitive price
 on-time delivery
 support the signed terms and conditions
 responsive from origin to destination
 monitoring all stages

We have realized through the years that without any shadow of a doubt
when you respect your customer in terms of offering a competitive edge
without compromising the product quality they will respect you back and
finally your group of customers will be increasing globally.
Products

Low Carbon Ferro Chromium

Low carbon ferro chrome is a ferro alloy composed of iron and silicon. It is made from coke, steel
scrap, quartz(or silica) and smelted in an electric furnace. Because silicon and oxygen are easily
synthesized into silica, low carbon ferro chrome is often used as a deoxidier in steel making., and it is
also advantageous to increase the temperature of the molten steel while deoxidizing. In addition, low
carbon ferro chrome can also be used as an alloying element additive, and widely used in low-alloy
structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel. It is
commonly used in iron alloy production and chemical industry as a reducing agent.
Low carbon ferro chrome is used as a deoxidizer and alloying agent in the steel making industry. In
order to obtain qualified steel and ensure the quality of steel, deoxidation must be carried out in the
final stage of steel making.
It is also used as an inoculant and nodularizer in the cast iron industry. A certain amount of low
carbon ferro chrome can prevent the formation of carbides in iron and promote the precipitation and
spheroidization of graphite for casting.

Chemical Analysis
Brand Contents ( wt.% )
Cr C Si P S
LcFeCr 60-65 0.1 Max 2 Max 0.04 Max 0.025 Max
68-74 0.1 Max 1 Max 0.03 Max 0.025 Max
*Some elements can be varry based on request

Ferro Manganase

Ferromanganese is a ferroalloy with high manganese content (high-carbon

ferromanganese can contain as much as 80% Mn by weight). It is made by heating a
mixture of the oxides MnO2 and Fe2O3, with carbon (usually as coal and coke) in either
a blast furnace or an electric arc furnace-type system, called a submerged arc furnace.
The oxides undergo carbothermal reduction in the furnaces, producing the
ferromanganese. Ferromanganese is used as a deoxidizer for steel.
Standard ferromanganese, also known as high-carbon ferromanganese, is one of the
manganese ferroalloys smelted directly from manganese ores. Manganese content
ranges from 65 to 82% and the carbon content from 0.4% to 7.5%. It is produced either
by a blast furnace or a submerged arc furnace.
 Chemical Analysis
Brand Contents ( wt.% )
Mn C Si P S
LcFeMn 78-80 0.4 - 0.7 1.0 0.30 0.02
McFeMn 75-78 1.5 - 2 Max 1.5 0.35 0.03
HcFeMn 65-75 0.7 Max 1.5 0.35 0.03

*Size: 10-150 mm based on demand

Ferro Silico Manganase

This ferroalloy is actually a combination of ferromanganese and ferrosilicon.The

production process of this element is more difficult than the ferromanganese due
to the presence of silicon in the composition. This material is produced at a
higher temperature of ferromanganese from the slag obtained from the high-
carbon ferromanganese production process. This slag contains nearly 40% of
manganese oxide and is considered a manganese-based material. It is used to
create silicon in a combination of silicon-based materials such as quartz or sand.
The quartz and manganese in the slag must be regenerated. To regenerate
these materials, a carbon-based material such as coke is used.

Chemical Analysis
Brand Contents ( wt.% )
FeSiMn 60/14
Mn Si C P S
FeSiMn 65/15 60 14 2.5 0.30 0.30
FeSiMn 65/16 65 15 2.5 0.30 0.50
FeSiMn 65/17
65 16 2.5 0.30 0.50
65 17 2.5 0.30 0.50

*Size and Packing can be adjusted by customer requirement

Carbon additive 
Graphite Petroleum Coke

Graphite Petroleum Coke is widely used as carburant in the steel-making industry and precision casting
industry, reduction pregnant agent in the casting industry, reducing agent in metallurgical industry and as
one kind of refractory, etc.
Graphite Petroleum Coke could promote the nucleation of the graphite in liquid iron, increase the amount
of spheroidal graphite, and improve the structure and the grade of grey iron.

Chemical Analysis
Brand Contents ( wt.% )
FC S Ash VM P Moisture
GPC (Grade 1)
98.5 Min 0.05 Max 0.70 Max 0.70 Max 0.05 Max 0.5 Max

99.0 Min 0.03 Max 0.50 Max 0.50 Max 0.03 Max 0.5 max
GPC (Grade 2)

*Size and Packing can be adjusted by customer requirement

Calcined Petroleum Coke

Calcined petroleum coke is a kind of petrochemical product, whose raw materials

is green petroleum coke. It is widely used to produce graphite electrode, graphite
blocks, brakes pads and other carbon products.It can also be used as carbon
additive in some steel and aluminum plants, another, it is used in refractory,
insulation, filler, etc.

Chemical Analysis
Brand Contents ( wt.% )
FC S Ash VM P Moisture
CPC # 1 98.5 Min 0.5 max 1.0 Max 0.5 Max 0.02 Max 0.5 Max

CPC # 2 98.5 Min 0.8 max 0.5 Max 0.5 Max 0.02 Max 0.5 Max

CPC # 3 98.5 Min 1.2 max 0.7 Max 0.8 Max 0.02 Max 0.5 Max

*Size and Packing can be adjusted by customer requirement

Base Metals
Nickel
Nickel is a hard, silvery-white metal which can be combined with other metals,
such as iron, copper, chromium, and zinc, to form alloys. These alloys are used
to make coins, jewelry, and items such as valves and heat exchangers.
Most nickel is used to make stainless steel. Nickel can combine with other
elements such as chlorine, sulfur, and oxygen to form nickel compounds.
Many nickel compounds dissolve fairly easy in water and have a green
color. Nickel compounds are used for nickel plating, to color ceramics, to make
some batteries, and as substances known as catalysts that increase the rate of
chemical reactions.
Nickel is with atomic symbol Ni, atomic number 28, and atomic weight 58.69.

Chemical Analysis
Brand Contents ( wt.% )
Nickel Cobalt Iron Carbon Sulphur Copper Zinc

Nickel
>99.98 <0.00005 0.005  0.01 0.0004 0.0002 <0.00005
Pellets
or
Plates
* 1000kg steel drum; 1 drum or 4 drums per pallet, strapped

Ferrotitanium

Ferrotitanium is a ferroalloy, an alloy of iron and titanium with between 10–20%

iron and 45–75% titanium and sometimes a small amount of carbon
Titanium is used in steelmaking for deoxidation, grain-size control, carbon and
nitrogen control, and stabilization. During steelmaking, titanium is introduced
as ferrotitanium because of its lower melting temperature and higher density
compared to those of titanium scrap. Producers of interstitial-free, stainless, and
high-strength low-alloy steels are the major consumers of titanium within the
steel industry.
Ferrotitanium is usually produced by induction melting of titanium scrap with iron
or steel; however, it is also produced directly from titanium mineral concentrates.

Ferrotungsten
Ferro Tungsten is an alloy, which is formed by combining iron and tungsten with
a tungsten content range in two grades (A and B) and the content ranges are
75%-82% and 70%-75% respectively.

Ferrotungsten is a remarkably robust alloy because of its high melting point,

tungsten has the second highest melting point after carbon. By combining iron
with tungsten, the tendencies towards brittleness are overcome from the raw
state of tungsten, and Ferro Tungsten is often a major component of popular
super alloys.

Ferrovanadium

Ferrovanadium is an important alloy product containing vanadium, which is

typically used as a furnace ingredient in steel metallurgy processes. It is common
to use ferrovanadium with either 40%, 60%, or 80% V, where the uncertainty in
the vanadium content needs to be small, and the C, S, and P contents are strictly
limited. Ferrovanadium production methods mainly include the electro-silicon
thermal process, aluminum thermal process, and direct alloying of vanadium
slag. In general, the vanadium content in ferrovanadium is above 40%, and the
material has a melting point of 1480°C, solid density of 7.0 t/m3, bulk density of
3.3–3.9 t/m3.
Ferrovanadium is supplied in two varieties. The common standard chemical
composition is:
Brand Chemical composition (wt.%)
V Al Si C S P As Cu
Less than
FeV60 50–65 2.0 1.5 0.15 0.05 0.06 0.06 0.10
FeV80 78–82 1.5 1.5 0.15 0.05 0.06 0.06 0.10

Inoculant
Ferro Silicon Strantium

Calcium Silicon Barium

Ferro Silicon Aluminium

Ferro Silicon Barium

Ferro Silicon Zirconium

Alloy
Calsium Silicon Alloy
Calsium Silicon Manganese Alloy

Calsium Silicon Barium Alloy

Silicon Aluminium Alloy

Silicon Aluminium Calcium Alloy

Silicon Aluminium Barium Alloy

Alominium Manganese Calcium Alloy

Alominium Manganese Alloy

Silicon Aluminium Calsium Barium Alloy

Silicon Barium Alloy

Mission
Having followed the work business rules as a duty, our mission is based on obvious
.important topics which lead us to reach high customer satisfaction

Customer Commitment
We develop relationships that make a complete satisfaction sensation in our
customer's choice
 
Quality
We provide outstanding products and unsurpassed service that, together, deliver
.premium value to our customer
 
Integrity
.We uphold the highest standards of integrity in all of our actions
 
Teamwork
.We work together, across boundaries, to meet the needs of our customers
 
 
A Will to Win
.We exhibit a strong will to win in the marketplace and in every aspect of our business
 
Personal Accountability
.We are personally accountable for delivering on our commitments
Quality

EXIMAX Company is dedicated to ensuring its products and services fully meet the
customer’s satisfaction at all times.

The goal of the company is to achieve a high level of customer satisfaction at all
purchasing stages which leads us to comply with quality standards and shipping
procedures at all levels.

The company is committed to operating continuously to this standard and will main
quality approvals consistent with our customer's requirements.

The company will constantly review and improve on our services to ensure our tasks
based on the benefit of all our customers in the most cost-effective and timely manner
objectives will be set to ensure that the requirements of this policy are met and that will
be determined, maintained, and monitored by top management. Continuously following
up on the comments is an integral part of the strategy to achieve the objectives. This
policy is reviewed by top management at least annually to ensure success in
recommending any improvements considered necessary with the objective of providing
customer satisfaction.

Certificate of origins and quality control will be granted for each purchase and quality
surveillance can be control by the International Inspection Companies as SGS,
Bureau, Veritas, Intertek Group, TÜV and etc before shipping by demand.

Contact
Office:
+971 56 284 7714
+971 52 512 2437
[email protected]
WatsApp
WeChat
Telegram
Website: www.eximmax.com