P R O D U C T IN F O RM AT I O N

Fore- and
Midfoot System
2.0 / 2.3, 2.8

APTUS ®
Foot
2  |   Fore- and Midfoot System 2.0 / 2.3, 2.8

Fore- and Midfoot System

2.0 / 2.3, 2.8
Multidirectional and angular stable treatment
of the fore- and midfoot

Application
For the use in small bones, in particular in fractures,
osteotomies and arthrodesis of the tarsals, metatarsals and
phalanges.

Plate Features
• TriLock – multidirectional (± 15°) and angular stable locking
in each plate hole
• Low overall profile height
• Rounded edges and a smooth surface offer protection of the
soft tissues
• Anatomically pre-contoured plate designs
• Plates may be cut and bent for a wide range of applications
• Plate holes are compatible with locking and cortical screws
• Offset screw holes result in a higher rotational stability and
reduce the risk of bone splitting

 www.medartis.com/products/aptus/foot
 Fore- and Midfoot System 2.0 / 2.3, 2.8  |   3

Plate Designs
Straight Plate
• System 2.0 / 2.3 and 2.8
• Available as 4, 6 and 8 hole plates

T Plate

• System 2.0 / 2.3 and 2.8

• Available as 7 and 9 hole plates
• Plate design supports juxtaarticular application
• Increased subchondral stability achieved by a double row of
screws in the plate-head area

Grid Plate
• System 2.0 / 2.3 and 2.8
• Available in three lengths
• Increased subchondral stability achieved by a double row of
screws in the plate-head area

Wing Plate
• System 2.8
• Available in two sizes
• K-wire holes for 1.6 mm K-wires to assist with temporary plate
fixation and verification of implant position

  www.medartis.com/products/aptus/foot
4  |   Fore- and Midfoot System 2.0 / 2.3, 2.8

Technology, Biomechanics,
Screw Features
Multidirectional and angular stable
TriLock locking technology

Technology Locking Locked

• TriLock locking technology – multidirectional locking of the

screw in the plate
–– Spherical three-point wedge-locking
–– Friction locking through radial bracing of the screw head in
the plate – without additional tensioning components
• Screws can pivot freely by ± 15° in all directions for optimal
positioning
Secure locking of the TriLock screw
• Fine tuning capabilities of fracture fragments
• TriLock screws can be re-locked in the same screw hole at
individual angles up to three times
• Minimal screw head protrusion thanks to internal locking
contour
• No cold welding between plate and screws
TriLock screws
can be re-locked
up to three times

Variable angle of ± 15°

Minimal screw head protrusion

 www.medartis.com/products/aptus/foot
 Fore- and Midfoot System 2.0 / 2.3, 2.8  |   5

Biomechanics
• Internal fixator principle
–– Stable plate – screw construct allows the bridging
of unstable zones
–– Improved vascularization of the periosteum
due to low contact of the plate

Load-free zone

Screw Features
• HexaDrive screw head design
–– Secure connection between screw and screwdriver
–– Increased torque transmission
–– Simplified screw pick-up due to patented
self-holding technology
• Soft tissue protection due to smooth screw head design
• Atraumatic screw tip offers soft tissue protection when
inserting screws bicortically
• Increased torsional, bending and shear stability due to
conical core Contact surface for
screw retention (red)
• Precision cut thread profile for sharpness and
self-tapping properties Contact surface for torque
• Double threaded TriLock screws reduce screw insertion time transmission (green)

• Innovative screw design for all

Double thread Low screw
APTUS 2.8 screws ≥ 36 mm
head design
–– Screw shaft is slightly reduced in the mid section
–– Screw can be inserted with reduced torque without losing
stability and the risk of screw stripping

Conical core
insertion torque
Reduction of
Insertion Torque [%]

Insertion Depth [mm]

  www.medartis.com/products/aptus/foot
6  |   Fore- and Midfoot System 2.0 / 2.3, 2.8

Storage

• Modular concept
• Economic and compact system
• Easy to handle
• Customized kit arrangement
• Streamlined organization of implants and instruments

 www.medartis.com/products/aptus/foot
 Fore- and Midfoot System 2.0 / 2.3, 2.8  |   7

APTUS Foot 2.0 / 2.3 Implant Container APTUS Foot 2.0 / 2.3 Implant Module
Art. No. A-0510 (incl. stickers, empty) Art. No. A-6211 (excl. stickers, empty)

Upper module

Example of a fully equipped

implant container A-0510.

APTUS Foot 2.8 Implant Container APTUS Foot 2.8 Implant Module
Art. No. A-0520 (incl. stickers, empty) Art. No. A-6211 (excl. stickers, empty)

Upper module

Example of a fully equipped

implant container A-0520.

  www.medartis.com/products/aptus/foot
8  |   Fore- and Midfoot System 2.0 / 2.3, 2.8

Ordering Information
2.0 / 2.3 TriLock Plates
Material: Titanium (ASTM F67)
Plate thickness: 1.3 mm

11 mm
50 mm

44 mm
38 mm

32 mm
27 mm

A-4655.01 A-4655.03 A-4655.08 A-4655.12 A-4655.13

Art. No. Description Holes Pieces / Pkg

A-4655.01 straight 4 1
A-4655.03 straight 6 1
A-4655.08 straight 8 1
A-4655.12 T 7 (3 / 4) 1
A-4655.13 T 9 (3 / 6) 1

2.0 / 2.3 TriLock Grid Plates

Material: Titanium (ASTM F67)
Plate thickness: 1.3 mm

10 mm
37 mm
29 mm
21 mm

A-4655.67 A-4655.68 A-4655.69

Art. No. Description Holes Pieces / Pkg

A-4655.67 Grid 6 (3 + 3) 1
A-4655.68 Grid 6 (3 + 3) 1
A-4655.69 Grid 6 (3 + 3) 1

 www.medartis.com/products/aptus/foot Scale: 1:1

 Fore- and Midfoot System 2.0 / 2.3, 2.8  |   9

2.8 TriLock Plates

Material: Titanium (ASTM F67)
Plate thickness: 1.6 mm

13 mm
52 mm

47 mm
40 mm

35 mm
28 mm

A-4850.01 A-4850.03 A-4850.08 A-4850.12 A-4850.13

Art. No. Description Holes Pieces / Pkg

A-4850.01 straight 4 1
A-4850.03 straight 6 1
A-4850.08 straight 8 1
A-4850.12 T 7 (2 / 5) 1
A-4850.13 T 9 (2 / 7) 1

2.8 TriLock Grid / Wing Plates

Material: Titanium (ASTM F67)
27 mm
Plate thickness: 1.6 mm
25 mm

12 mm
43 mm

39 mm
34 mm
32 mm
25 mm

A-4850.67 A-4850.68 A-4850.69 A-4850.71 A-4850.70

Art. No. Description Holes Pieces / Pkg

A-4850.67 Grid 6 (3 + 3) 1
A-4850.68 Grid 6 (3 + 3) 1
A-4850.69 Grid 6 (3 + 3) 1
A-4850.70 Wing, large 12 1
A-4850.71 Wing, small 11 1

Scale: 1:1   www.medartis.com/products/aptus/foot

10  |   Fore- and Midfoot System 2.0 / 2.3, 2.8

2.0 TriLock Screws, HexaDrive 6

Material: Titanium (ASTM F136)

Length Art. No. Pieces / Pkg Art. No. Pieces / Pkg

6 mm A-5450.06/1 1 A-5450.06 5
7 mm A-5450.07/1 1 A-5450.07 5
8 mm A-5450.08/1 1 A-5450.08 5
9 mm A-5450.09/1 1 A-5450.09 5
10 mm A-5450.10/1 1 A-5450.10 5
11 mm A-5450.11/1 1 A-5450.11 5
12 mm A-5450.12/1 1 A-5450.12 5
13 mm A-5450.13/1 1 A-5450.13 5
14 mm A-5450.14/1 1 A-5450.14 5
16 mm A-5450.16/1 1 A-5450.16 5
18 mm A-5450.18/1 1 A-5450.18 5
20 mm A-5450.20/1 1 A-5450.20 5
22 mm A-5450.22/1 1 A-5450.22 5
24 mm A-5450.24/1 1 A-5450.24 5
26 mm A-5450.26/1 1 A-5450.26 5
28 mm A-5450.28/1 1 A-5450.28 5
30 mm A-5450.30/1 1 A-5450.30 5

2.3 Cortical Screws, HexaDrive 6

Material: Titanium (ASTM F136)

Length Art. No. Pieces / Pkg Art. No. Pieces / Pkg

6 mm A-5500.06/1 1 A-5500.06 5
7 mm A-5500.07/1 1 A-5500.07 5
8 mm A-5500.08/1 1 A-5500.08 5
9 mm A-5500.09/1 1 A-5500.09 5
10 mm A-5500.10/1 1 A-5500.10 5
11 mm A-5500.11/1 1 A-5500.11 5
12 mm A-5500.12/1 1 A-5500.12 5
13 mm A-5500.13/1 1 A-5500.13 5
14 mm A-5500.14/1 1 A-5500.14 5
15 mm A-5500.15/1 1 A-5500.15 5
16 mm A-5500.16/1 1 A-5500.16 5
17 mm A-5500.17/1 1 A-5500.17 5
18 mm A-5500.18/1 1 A-5500.18 5
19 mm A-5500.19/1 1 A-5500.19 5
20 mm A-5500.20/1 1 A-5500.20 5
21 mm A-5500.21/1 1 A-5500.21 5
22 mm A-5500.22/1 1 A-5500.22 5
23 mm A-5500.23/1 1 A-5500.23 5
24 mm A-5500.24/1 1 A-5500.24 5
26 mm A-5500.26/1 1 A-5500.26 5
28 mm A-5500.28/1 1 A-5500.28 5
30 mm A-5500.30/1 1 A-5500.30 5
32 mm A-5500.32/1 1 A-5500.32 5
34 mm A-5500.34/1 1 A-5500.34 5

 www.medartis.com/products/aptus/foot Scale: 1:1

 Fore- and Midfoot System 2.0 / 2.3, 2.8  |   11

2.8 TriLock Screws, HexaDrive 7

Material: Titanium (ASTM F136)

Length Art. No. Pieces / Pkg Art. No. Pieces / Pkg

8 mm A-5850.08/1 1 A-5850.08 5
10 mm A-5850.10/1 1 A-5850.10 5
12 mm A-5850.12/1 1 A-5850.12 5
14 mm A-5850.14/1 1 A-5850.14 5
16 mm A-5850.16/1 1 A-5850.16 5
18 mm A-5850.18/1 1 A-5850.18 5
20 mm A-5850.20/1 1 A-5850.20 5
22 mm A-5850.22/1 1 A-5850.22 5
24 mm A-5850.24/1 1 A-5850.24 5
26 mm A-5850.26/1 1 A-5850.26 5
28 mm A-5850.28/1 1 A-5850.28 5
30 mm A-5850.30/1 1 A-5850.30 5
32 mm A-5850.32/1 1 A-5850.32 5
34 mm A-5850.34/1 1 A-5850.34 5
36 mm A-5850.36/1 1 A-5850.36 5
38 mm A-5850.38/1 1 A-5850.38 5
40 mm A-5850.40/1 1 A-5850.40 5
45 mm A-5850.45/1 1 A-5850.45 5

2.8 Cortical Screws, HexaDrive 7

Material: Titanium (ASTM F136)

Length Art. No. Pieces / Pkg Art. No. Pieces / Pkg

8 mm A-5800.08/1 1 A-5800.08 5
10 mm A-5800.10/1 1 A-5800.10 5
12 mm A-5800.12/1 1 A-5800.12 5
14 mm A-5800.14/1 1 A-5800.14 5
16 mm A-5800.16/1 1 A-5800.16 5
18 mm A-5800.18/1 1 A-5800.18 5
20 mm A-5800.20/1 1 A-5800.20 5
22 mm A-5800.22/1 1 A-5800.22 5
24 mm A-5800.24/1 1 A-5800.24 5
26 mm A-5800.26/1 1 A-5800.26 5
28 mm A-5800.28/1 1 A-5800.28 5
30 mm A-5800.30/1 1 A-5800.30 5
32 mm A-5800.32/1 1 A-5800.32 5
34 mm A-5800.34/1 1 A-5800.34 5
36 mm A-5800.36/1 1 A-5800.36 5
38 mm A-5800.38/1 1 A-5800.38 5
40 mm A-5800.40/1 1 A-5800.40 5
45 mm A-5800.45/1 1 A-5800.45 5

Scale: 1:1   www.medartis.com/products/aptus/foot

12  |   Fore- and Midfoot System 2.0 / 2.3, 2.8

Twist Drill  1.6 mm

Art. No. System Size Stop Length Drill Shaft End Pieces / Pkg
A-3434 2.0 30 mm 86 mm AO Quick Coupling 1

Twist Drill  1.9 mm

Art. No. System Size Stop Length Drill Shaft End Pieces / Pkg
A-3530 2.3 35 mm 91 mm AO Quick Coupling 1

Twist Drill  2.35 mm (for Gliding Hole)

Art. No. System Size Stop Length Drill Shaft End Pieces / Pkg
A-3531 2.3 10 mm 66 mm AO Quick Coupling 1

Twist Drill  2.35 mm

Art. No. System Size Stop Length Drill Shaft End Pieces / Pkg
A-3832 2.8 50 mm 101 mm AO Quick Coupling 1

Twist Drill  2.9 mm (for Gliding Hole)

Art. No. System Size Stop Length Drill Shaft End Pieces / Pkg
A-3834 2.8 10 mm 61 mm AO Quick Coupling 1

Countersink for Cortical Screws

Art. No. System Size  Length Shaft End Pieces / Pkg

A-3835 2.8 3.7 mm 45 mm AO Quick Coupling 1

 www.medartis.com/products/aptus/foot Scale: 1:1

 Fore- and Midfoot System 2.0 / 2.3, 2.8  |   13

Screwdrivers, Self-Holding

A-2610

A-2810

Art. No. System Size Interface Length Pieces / Pkg

A-2610 2.0 / 2.3 HD6 153 mm 1
A-2810 2.8 HD7 166 mm 1

Handle with Quick Connector

Art. No. Length for Shaft End Pieces / Pkg

A-2070 119 mm AO Quick Coupling 1

Drill Guides

A-2021

A-2022

Art. No. System Size Description Length Pieces / Pkg

A-2021 2.0 / 2.3, 2.8 147 mm 1
A-2022 2.0 / 2.3, 2.8 for lag screws 150 mm 1

Depth Gauge

Art. No. System Size Length Pieces / Pkg

A-2031 2.0 – 2.8 189 mm 1

Scale: 1:2   www.medartis.com/products/aptus/foot

14  |   Fore- and Midfoot System 2.0 / 2.3, 2.8

Plate Cutting Pliers

Art. No. System Size Length Pieces / Pkg

A-2045 2.0 – 3.5 218 mm 1

Plate Bending Pliers

Art. No. System Size Description Length Pieces / Pkg

A-2047 2.0 – 2.8 with pins 158 mm 1

Plate Holding Forceps

Art. No. System Size Length Pieces / Pkg

A-2050 2.0 – 3.5 122 mm 1

 www.medartis.com/products/aptus/foot Scale: 1:2

 Fore- and Midfoot System 2.0 / 2.3, 2.8  |   15

Sterilizing Case

A-6024

A-6040

Art. No. Description Pieces / Pkg

A-6040 260 x 270 x 120 mm 1
A-6024 lid for A-6040 1

Instrument Trays

A-6026 A-6029 A-6030

Art. No. Description Pieces / Pkg

A-6026 lower «1» 1
A-6029 middle «2» for A-6026 1
A-6030 upper «3» for A-6026 1

Lid for Intrument Tray

Art. No. Description Pieces / Pkg

A-6002 APTUS Foot 2.0 – 2.8 for A-6026 1

  www.medartis.com/products/aptus/foot
FOOT-01000001_v4 / © 2016-06, Medartis AG, Switzerland. All technical data subject to alteration.

HE AD QUARTERS
Medartis AG  |  Hochbergerstrasse 60E  |  4057 Basel / Switzerland
P +41 61 633 34 34  |  F +41 61 633 34 00  | www.medartis.com

SUBSIDIARIES
Australia  | Austria | France | Germany | Mexico |  New Zealand  | Poland | UK | USA

For detailed information regarding our subsidiaries and distributors, please visit www.medartis.com