Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Tou - 70-02 Wire Diagram

    Uploaded by

    amando manuel
    This document provides instructions for removing and installing the assembly carrier on a Volkswagen Touareg. Key steps include: - Securing the vehicle and removing various interior trim components. - Removing bolts and nuts attaching the steering column, parking brake unit, and other components to the carrier. - Removing additional bolts attaching the carrier to the vehicle bulkhead and tunnel supports. - Pulling crash bars down from mounting pins and removing the entire carrier from the vehicle. Reinstallation follows the removal steps in reverse order.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tou - 70-02 Wire Diagram

    Uploaded by

    amando manuel
    19 views9 pages
    This document provides instructions for removing and installing the assembly carrier on a Volkswagen Touareg. Key steps include: - Securing the vehicle and removing various interior trim components. - Removing bolts and nuts attaching the steering column, parking brake unit, and other components to the carrier. - Removing additional bolts attaching the carrier to the vehicle bulkhead and tunnel supports. - Pulling crash bars down from mounting pins and removing the entire carrier from the vehicle. Reinstallation follows the removal steps in reverse order.

    Original Description:

    tou_70-02 wire diagram

    Original Title

    tou_70-02 wire diagram

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for removing and installing the assembly carrier on a Volkswagen Touareg. Key steps include: - Securing the vehicle and removing various interior trim components. - Removing bolts and nuts attaching the steering column, parking brake unit, and other components to the carrier. - Removing additional bolts attaching the carrier to the vehicle bulkhead and tunnel supports. - Pulling crash bars down from mounting pins and removing the entire carrier from the vehicle. Reinstallation follows the removal steps in reverse order.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views9 pages

    Tou - 70-02 Wire Diagram

    Uploaded by

    amando manuel
    This document provides instructions for removing and installing the assembly carrier on a Volkswagen Touareg. Key steps include: - Securing the vehicle and removing various interior trim components. - Removing bolts and nuts attaching the steering column, parking brake unit, and other components to the carrier. - Removing additional bolts attaching the carrier to the vehicle bulkhead and tunnel supports. - Pulling crash bars down from mounting pins and removing the entire carrier from the vehicle. Reinstallation follows the removal steps in reverse order.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 9

    Volkswagen Touareg - Assembly carrier Page 1 / 9

    70 - 2

    Assembly carrier
    Assembly carrier, removing and installing

    Removing

    - Secure vehicle against possible rolling. Parking brake


    may not be used for this, because operating mechanism
    will later be disassembled.

    - If vehicle has manual transmission, select 2nd gear.

    - If vehicle has automatic transmission, select rearmost


    driving range position.

    - Remove center console storage compartment 68-2,


    Center console storage compartment, removing and
    installing .

    - Remove center console 68-2, Center console,


    removing and installing

    - Remove driver airbag unit 69-4, Driver airbag unit,


    removing and installing

    - Remove steering wheel 69-4, Steering wheel,


    removing and installing

    - Remove steering column trim 68-2, Steering column


    trim, removing and installing

    - Remove side instrument panel covers 68-2, Instrument


    panel side covers, removing and installing .

    - Remove footwell covers 68-2, Footwell covers,


    removing and installing

    - Remove instrument panel hood 68-2, Instrument panel


    hood, removing and installing

    - Remove upper A-pillar trim 70-4, Upper A-pillar trim,


    removing and installing

    - Remove instrument panel 70-1, Instrument panel,


    removing and installing

    - Remove plenum chamber cover

    Repair Manual, Body Exterior, Repair Group 64, Glass

    - Remove steering column from assembly carrier


    Assembly carrier Page 2 / 9

    Repair Manual, Suspension, Wheels, Brakes, Steering ,


    Repair Group 48, Steering

    - To ensure proper installation position when reinstalling,


    mark installation position vertically and horizontally on left
    and right A-pillar securing brackets with an awl.

    - Depending on vehicle equipment, remove Ground (GND)


    cable and side fuse holder.

    - Remove nut - 1 - .

    - Remove onboard power supply control


    module bracket - 2 - from mounting in
    assembly carrier - 3 - .
    Assembly carrier Page 3 / 9

    - Remove bolts - 1 - and - 2 - (23 Nm).

    - Remove parking brake operating unit -


    3 - from assembly carrier - 4 - .
    Assembly carrier Page 4 / 9

    - Secure heating and air conditioning unit


    - 1 - , in front passenger footwell,
    against possible sagging.

    - Remove two bolts - 2 - (10 Nm).

    - Remove bolt - 3 - (10 Nm).

    Note :

    „ Assembly carrier is secured with a bolt - 1 - on


    bulkhead - 2 - . Position of bolt is above steering
    column. Bolt is accessible from plenum chamber.
    Assembly carrier Page 5 / 9

    - Remove bolt cap - 1 - in plenum


    chamber and remove bolt (23 Nm).

    - A spacing element - 4 - is installed


    between bulkhead - 2 - and assembly
    carrier - 3 - .

    - Before assembly carrier is reinstalled,


    spacing element - 4 - must be
    completely retracted - 6 - by turning
    outer disk - 5 - - arrow - .

    Note :

    „ During reinstallation, ensure that foot pedal cluster


    bracket - 7 - is also bolted into this connection.
    Assembly carrier Page 6 / 9

    - Remove 2 securing bolts for tunnel


    supports - 1 - and - 2 - (23 Nm).
    Assembly carrier Page 7 / 9

    - Remove two bolts each on left and right


    sides - 1 - and - 2 - (23 Nm).
    Assembly carrier Page 8 / 9

    - Remove lock washer - 1 - .

    - Pull crash bars - 2 - and - 3 - for foot


    pedal cluster down from mounting pins
    on assembly carrier - 4 - .

    Note :

    „ During installation, check that both crash bars - 2 -


    and - 3 - are installed. Crashbar - 3 - must also be
    additionally secured with a lock washer.

    - Remove assembly carrier from vehicle.

    Installing

    - Installation is performed in reverse order of removal.

    Note:

    „ Make sure that assembly carrier is aligned vertically


    Assembly carrier Page 9 / 9

    and horizontally in vehicle. To do this, use


    corresponding scribe marks on left and right on A-
    pillar securing brackets.

    You might also like