Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Lab Handout#1

    Uploaded by

    Abdul Qudoos
    This document provides instructions for a lab activity to verify the current divider rule and voltage divider rule by designing circuits with resistors, calculating expected currents and voltages, measuring actual currents and voltages, and calculating percentage errors to validate the rules. Students are asked to complete worksheets recording their calculations and measurements and conclude by designing two complex circuits in Multisim software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lab Handout#1

    Uploaded by

    Abdul Qudoos
    19 views6 pages
    This document provides instructions for a lab activity to verify the current divider rule and voltage divider rule by designing circuits with resistors, calculating expected currents and voltages, measuring actual currents and voltages, and calculating percentage errors to validate the rules. Students are asked to complete worksheets recording their calculations and measurements and conclude by designing two complex circuits in Multisim software.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for a lab activity to verify the current divider rule and voltage divider rule by designing circuits with resistors, calculating expected currents and voltages, measuring actual currents and voltages, and calculating percentage errors to validate the rules. Students are asked to complete worksheets recording their calculations and measurements and conclude by designing two complex circuits in Multisim software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views6 pages

    Lab Handout#1

    Uploaded by

    Abdul Qudoos
    This document provides instructions for a lab activity to verify the current divider rule and voltage divider rule by designing circuits with resistors, calculating expected currents and voltages, measuring actual currents and voltages, and calculating percentage errors to validate the rules. Students are asked to complete worksheets recording their calculations and measurements and conclude by designing two complex circuits in Multisim software.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    Sukkur Institute of Business Administration University

    Department of Electrical Engineering


    Linear Circuit Analysis BE-II

    Handout # 01: Verification of Current Divider Rule (CDR) & Voltage Divider Rule
    (VDR)
    Instructor: Engr. Husnain Hyder

    Note: Submit this lab hand-out in the next lab with attached solved activities and exercises

    Submission Profile

    Name: Submission date:

    Marks obtained: Receiving authority name and signature:

    Comments:

    ________________________________________________________________________________

    Instructor Signature
    Learning Objectives

     To get hands on practice to design & analyze the linear circuits on NI Elvis-II.
     To understand & verify the voltage divider circuits & current divider circuits.
     To design & solve circuits on Multisim software.

    Lab Hardware & Software Required

     NI Elvis-II Kit
     Resistors
     Connecting wires
     PC
     Multisim

    Background Theory

    Electric Circuit:

    A connection of various electric elements of an electric network forming a closed path is called an
    electric circuit.

    Current Divider Circuits:

    When circuit elements are connected in parallel, current through the circuit is divided into each
    individual element, whose magnitude depends on the ohmic value of an each element.

    Current divider rule provides a useful relationship for determining the current through individual
    circuit elements that are connected in parallel.

    FIG. 1
    In the circuit shown in Fig.1, Current 𝐼𝑡 is divided between the resistors 𝑅1 & 𝑅2 . The current
    through each resistor 𝐼1 & 𝐼2 can be determined by the current division rule.

    𝑹𝟐
    𝑰𝟏 = 𝑰𝒕 × … (i)
    𝑹𝟏+ 𝑹𝟐
    Similarly for 𝐼2 ;

    𝑹𝟏
    𝑰𝟐 = 𝑰𝒕 × … (ii)
    𝑹𝟏+ 𝑹𝟐

    Voltage Divider Rule:

    Each resistor in a series combination has a different voltage drop across it depending upon its ohmic
    value. The individual voltage drop of resistors adds up to source voltage. However, current through
    the series circuit will remain same.

    Voltage Divider Rule shows how the voltage distributes among different resistors in a series circuit.

    Fig.2
    In the series circuit shown Fig.2, voltage is divided across resistors 𝑅1 & 𝑅2 . The voltage across each
    resistor is 𝑉1 & 𝑉2 respectively and can be determined using a Voltage divider rule.

    𝑹𝟏
    𝑽𝟏 = 𝑽𝒊𝒏 × … (iii)
    𝑹𝑻

    𝑹𝟐
    𝑽𝟐 = 𝑽𝒊𝒏 × … (iv)
    𝑹𝑻
    Lab Activities

    - Verification of Current Divider Rule:

     Design the circuit consisting of four resistors & connect it with the 12-Volt DC source as
    shown in Fig. 2. Resistor ratings can be taken as per choice.

    FIG. 3

     Calculate the current though each parallel branch using a Current Divider rule & record the
    readings in Table.1 as given in Worksheet.
     Measure the current using an ammeter through each parallel branch & record the readings in
    Table.1 given in worksheet.
     Find the percentage error in each measurement.
     Verify the Current Divider Rule by comparing the results recorded in Table. 2.

    - Verification of Voltage Divider Rule:

     Design the series circuit shown in Fig.3. Resistor ratings can be taken as per choice.

    Fig. 4
     Calculate the voltage across each resistor using a Voltage divider rule & record it in
    Table.2 as given in the worksheet.
     Measure and record the Voltage across each resistor using a voltmeter & record the
    readings in Table.2 given in the worksheet.
     Find the percentage error in each measurement.
     Verify the Voltage Divider Rule by comparing the results recorded in Table. 2.

    Note: Design two different complex electric circuits on Multisim and


    demonstrate the results; also attach the results in Lab Handout.
    WORKSHEET
    Table.1

    Current (mA) [Calculated] Current (mA) [Measured] Percentage Error


    𝐼𝑅2 = 𝐼𝑅2 =
    𝐼𝑅3 = 𝐼𝑅3 =
    𝐼𝑅4 = 𝐼𝑅4 =

    Table.2

    Voltage (V) [Calculated] Voltage (V) [Measured] Percentage Error


    𝑉𝑅1 = 𝑉𝑅1 =
    𝑉𝑅2 = 𝑉𝑅2 =
    𝑉𝑅3 = 𝑉𝑅3 =

    Conclusion:

    You might also like