Instrumentation Uick Onnectors
Instrumentation Uick Onnectors
Instrumentation Uick Onnectors
QUICK CONNECTORS
FEATURES GENERAL
Working pressure rating: up to 3,000 psig (206 bar). The HAM-LET QC-LOK® Instrumentation Quick Connectors are
Interchangeable and intermixable with major Instrumentation designed for service in a large variety of applications, with a
Quick Connectors availble in the market. MAWP of up to 3,000 psig (206 bar).
Fluorocarbon FKM O-Rings as standard, O-rings with other materials
are available.
Single and Double End Shut-off Stems
Smooth and safe connection between the QC-LOK® Connector valves Single-end shut-off (SESO) - Stems have no valve and remain open
is reached by a simple pushing operation due to a smart heavy-duty when uncoupled.
locking mechanism. Double-end shut-off (DESO) - Stems have valve and shut's-off when
The QC-LOK® Instrumentation Quick Connectors validation tests are uncoupled.
based on ANSI/B93.51M–1980.
MATERIALS OF CONSTRUCTION
Components Material Components Material
1 *Body 316SS *12 Poppet seal Fluorocarbon FKM
2 Sleeve 316SS *13 End connection seal Fluorocarbon FKM
O-Rings
Non-Valved
Valved and
3 *Stem 316SS 1
14A Body seal Fluorocarbon FKM
Stems
Springs
8 *Body 316SS 19 Stem sleeve spring 316SS
1
9A Locking Balls 302SS 20 Stem spring 316SS
9B
2
Locking Dogs 316SS 21 Stem sleeve locking ring 316SS
10 Sleeve 316SS 22 Body sleeve locking ring 316SS
Body
6 8 7 4 20 9A 10 3 2 16 1 13 11 15 9B
DESO
12 FLOW DIRECTION
17 13 14A 15 5 18 22 21 19
Dimensions are for reference only and are subject to change without notice
PRESSURE-TEMPERATURE RATINGS
Uncoupled and
When Coupling and *MAWP 250 psig (17.2 bar) @ 70°F (21°C)
Uncoupling
*MAWP - Maximum Allowable Working Pressure *MAWT - Maximum Allowable Working Temperature
Note:
Uncoupled QC-LOK is rated up to 70°F (21°C)
Pressure & Temperature ratings are for stainless steel construction and Fluorocarbon FKM Seals
Definitions:
Spillage: Volume of flowing media that will be released from the system while
disconnecting the DESO (only) Quick Connector.
Air Inclusion: Volume of air that will be entered to the system while connecting the DESO
(only) Quick Connector.
QC4 4 (15)
QC6 6 (22)
QC8 10 (37)
O-RINGS
Different materials are available for special applications
O-Ring Material Temperature Raiting °F (°C)
Buna N -35 to 250 (-37 to 121)
Ethylene Propylene (EPDM) -70 to 250 (-57 to 121)
Fluorocarbon FKM -15 to 400 (-26 to 204)
Polychloroprene (CR) -35 to 225 (-37 to 107)
Perfluoroelastomer -15 to 500 (-26 to 260)
WARNING
Always take notice of pressure rating restrictions that apply to coupling or uncoupling
SESO should not be uncoupled under pressure
QC-LOK® should not be rotated while coupled
OPTIONAL
QC4 - SS - B - L - 1/4 - -
QC4- 1/4” Body SS - 316 B - Body L - LET-LOK® (Tube) 1/8 BLANK - Fluorocarbon FKM
QC6- 3/8” Body S - SESO Stem LB - LET-LOK® Bulkhead 1/4 6MM BU - BUNA N
QC8- 1/2” Body D - DESO Stem NB - NPT Bulkhead 3/8 10MM EP - EPDM
Warning!
The system designer and user have the sole responsibility for selecting products suitable for their special application requirements, ensuring their safe and trouble-free installation,
operation, and maintenance. Application details, material compatibility and product ratings should all be considered for each selected product. Improper selection, installation or use of
products can cause property damage or personal injury.
QC-LOK | 2019_Rev00