Config Final 7210HEVAL
Config Final 7210HEVAL
# TiMOS-B-4.0.R8 both/mpc ALCATEL SAS-M 24F 2XFP 7210 Copyright (c) 2000-2011
Alcatel-Lucent.
# All rights reserved. All use subject to applicable license agreements.
# Built on Fri Nov 30 10:57:04 IST 2012 by builder in /builder/4.0B1/R8/panos/main
exit all
configure
#--------------------------------------------------
echo "System Configuration"
#--------------------------------------------------
system
name "HEValencia"
alarm-contact-input 1
shutdown
exit
alarm-contact-input 2
shutdown
exit
alarm-contact-input 3
shutdown
exit
alarm-contact-input 4
shutdown
exit
resource-profile
ingress-internal-tcam
exit
exit
snmp
packet-size 9216
exit
time
ntp
server 200.75.130.136
no shutdown
exit
sntp
shutdown
exit
zone VZLA -04:30
exit
thresholds
rmon
exit
exit
exit
#--------------------------------------------------
echo "System Security Configuration"
#--------------------------------------------------
system
security
telnet-server
ftp-server
user "admin"
password "C/Ks0cplXlucex9W5wv0UU" hash2
access console ftp snmp
console
member "administrative"
exit
exit
user "backup"
password "15fkeW0jFEwc9Af/.czD6." hash2
access console ftp
exit
user "nocwan"
password "hpjt9JZq/toUbZUiB.vXXE" hash2
access console ftp snmp
console
member "default"
member "administrative"
exit
exit
snmp
community "fRF7GjDzpTJusKt3nNyQzk" hash2 rwa version both
exit
ssh
preserve-key
version 1-2
exit
exit
exit
#--------------------------------------------------
echo "Log Configuration"
#--------------------------------------------------
log
snmp-trap-group 98
description "5620sam"
trap-target "192.168.160.1:162" address 192.168.160.1 snmpv2c notify-
community "net1snmptrap98"
exit
log-id 98
from main security
to snmp 1024
exit
exit
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
qos
#--------------------------------------------------
echo "Frame Based Accounting Configuration"
#--------------------------------------------------
exit
#--------------------------------------------------
echo "Card Configuration"
#--------------------------------------------------
card 1
mda 1
exit
exit
#--------------------------------------------------
echo "System loopback-port Configuration"
#--------------------------------------------------
system
exit
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
qos
no ldp-local-fc-enable
exit
#--------------------------------------------------
echo "Port Configuration"
#--------------------------------------------------
port 1/1/1
description "Interurbano CCS-VAL 1GB EDC #1"
ethernet
no autonegotiate
exit
no shutdown
exit
port 1/1/2
description "Interurbano CCS-VAL 1GB EDC #2"
ethernet
no autonegotiate
exit
no shutdown
exit
port 1/1/3
description "Reserva Interurbano CCS-VAL 1GB EDC #3"
ethernet
exit
no shutdown
exit
port 1/1/4
description "Reserva Interurbano CCS-VAL 1GB EDC #4"
ethernet
exit
no shutdown
exit
port 1/1/5
shutdown
ethernet
exit
exit
port 1/1/6
shutdown
ethernet
exit
exit
port 1/1/7
shutdown
ethernet
exit
exit
port 1/1/8
shutdown
ethernet
exit
exit
port 1/1/9
shutdown
ethernet
exit
exit
port 1/1/10
shutdown
ethernet
exit
exit
port 1/1/11
shutdown
ethernet
exit
exit
port 1/1/12
shutdown
ethernet
exit
exit
port 1/1/13
shutdown
ethernet
exit
exit
port 1/1/14
shutdown
ethernet
exit
exit
port 1/1/15
shutdown
ethernet
exit
exit
port 1/1/16
shutdown
ethernet
exit
exit
port 1/1/17
shutdown
ethernet
exit
exit
port 1/1/18
shutdown
ethernet
exit
exit
port 1/1/19
shutdown
ethernet
exit
exit
port 1/1/20
shutdown
ethernet
exit
exit
port 1/1/21
shutdown
ethernet
exit
exit
port 1/1/22
shutdown
ethernet
exit
exit
port 1/1/23
description "Conex. ESU1850 HE-VAL Puerto 5"
ethernet
mode access
access
exit
encap-type dot1q
exit
no shutdown
exit
port 1/1/24
shutdown
description "Conex. 7204 HE-VAL Gi 0/1"
ethernet
mode access
access
exit
encap-type dot1q
exit
exit
port 1/1/25
shutdown
ethernet
exit
exit
port 1/1/26
shutdown
ethernet
exit
exit
#--------------------------------------------------
echo "System Sync-If-Timing Configuration"
#--------------------------------------------------
system
sync-if-timing
begin
no ql-selection
ref1
shutdown
no ql-override
exit
ref2
shutdown
no ql-override
exit
commit
exit
exit
#--------------------------------------------------
echo "LAG Configuration"
#--------------------------------------------------
lag 4
description "Lag_to_7450TCC"
port 1/1/1
port 1/1/2
no shutdown
exit
#--------------------------------------------------
echo "Router (Network Side) Configuration"
#--------------------------------------------------
router
interface "system"
address 172.16.122.1/32
exit
interface "to_7450TCC"
address 172.16.120.250/30
port lag-4
exit
interface "to_7450TCC_1"
shutdown
address 172.16.120.246/30
exit
#--------------------------------------------------
echo "Static Route Configuration"
#--------------------------------------------------
static-route 0.0.0.0/0 next-hop 172.16.120.249
static-route 0.0.0.0/0 next-hop 172.16.120.245 metric 80
#--------------------------------------------------
echo "ISIS Configuration"
#--------------------------------------------------
isis
area-id 49.0001.0000.0000.0042.00
traffic-engineering
interface "system"
interface-type point-to-point
exit
interface "to_7450TCC_1"
interface-type point-to-point
exit
interface "to_7450TCC"
interface-type point-to-point
exit
exit
#--------------------------------------------------
echo "MPLS Configuration"
#--------------------------------------------------
mpls
interface "system"
exit
interface "to_7450TCC_1"
exit
interface "to_7450TCC"
exit
exit
#--------------------------------------------------
echo "RSVP Configuration"
#--------------------------------------------------
rsvp
interface "system"
exit
interface "to_7450TCC_1"
exit
interface "to_7450TCC"
exit
no shutdown
exit
#--------------------------------------------------
echo "MPLS LSP Configuration"
#--------------------------------------------------
mpls
path "7210HEVAL_to_7450HE_Primary"
hop 1 172.16.120.2 strict
hop 2 172.16.120.1 strict
no shutdown
exit
path "7210HEVAL_to_7450HE_Secondary"
hop 1 172.16.120.2 strict
hop 2 172.16.120.4 strict
hop 3 172.16.120.1 strict
no shutdown
exit
path "7210HEVAL_to_7210DAYCO_Primary"
hop 1 172.16.120.2 strict
hop 2 172.16.120.4 strict
hop 3 172.16.120.3 strict
hop 4 172.16.120.23 strict
hop 5 172.16.120.15 strict
no shutdown
exit
path "7210HEVAL_to_7210DAYCO_Secondary"
hop 1 172.16.120.2 strict
hop 2 172.16.120.1 strict
hop 3 172.16.120.4 strict
hop 4 172.16.120.14 strict
hop 5 172.16.120.11 strict
hop 6 172.16.120.26 strict
hop 7 172.16.120.15 strict
no shutdown
exit
lsp "7210HEVAL_to_7450HE"
to 172.16.120.1
cspf
fast-reroute facility
exit
primary "7210HEVAL_to_7450HE_Primary"
exit
secondary "7210HEVAL_to_7450HE_Secondary"
standby
exit
no shutdown
exit
no shutdown
exit
#--------------------------------------------------
echo "LDP Configuration"
#--------------------------------------------------
ldp
interface-parameters
interface "to_7450TCC_1"
exit
interface "to_7450TCC"
exit
exit
targeted-session
peer 172.16.120.1
exit
peer 172.16.120.2
exit
exit
exit
exit
#--------------------------------------------------
echo "Service Configuration"
#--------------------------------------------------
service
customer 1 create
description "Default customer"
exit
customer 5 create
description "NETUNO"
exit
customer 999 create
description "Prueba"
exit
sdp 60 mpls create
description "7210HEVAL_to_7450HE"
far-end 172.16.120.1
lsp "7210HEVAL_to_7450HE"
keep-alive
shutdown
exit
no shutdown
exit
exit
#--------------------------------------------------
echo "Router (Service Side) Configuration"
#--------------------------------------------------
router
exit
#--------------------------------------------------
echo "System Time NTP Configuration"
#--------------------------------------------------
system
time
ntp
exit
exit
exit
exit all