0% found this document useful (0 votes)
364 views36 pages

Level 3 Repair: 8-1. Components Layout

The document describes the layout of components on various sub-printed board assemblies (PBA) involved in level 3 repair of an unspecified device. Diagrams show the layout and labels of components on the WiFi sub-PBA top and bottom, USB sub-PBA top and bottom, and Wacom sub-PBA. Confidentiality of the document is noted.

Uploaded by

Gideao Astun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
364 views36 pages

Level 3 Repair: 8-1. Components Layout

The document describes the layout of components on various sub-printed board assemblies (PBA) involved in level 3 repair of an unspecified device. Diagrams show the layout and labels of components on the WiFi sub-PBA top and bottom, USB sub-PBA top and bottom, and Wacom sub-PBA. Confidentiality of the document is noted.

Uploaded by

Gideao Astun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 36

8.

Level 3 Repair

8-1. Components Layout

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

WIFI SUB PBA TOP

WIFI SUB PBA BOTTOM

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

USB SUB PBA TOP USB SUB PBA BOTTOM

WACOM SUB PBA

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
UFS_RST_N
UFS_REFCLK
UFS
UFS_RX_D0_P/N
RFFE0 CLK / DATA UFS_TX_D0_P/N
CPL_HP
Form HBPAMid 
VRF_FEMID_1P8
CPL OUT

PRX_TR_IN_B1_4_34_66
T_FLASH_D0:3
PRX_TR_IN_B2_3_25_39 SIM_DATA
SIM_TRAY_DET
PRX_TR_IN_LB SIM/SD
SIM_CLK
T_FLASH_CLK
SIM_RST
RFFE0 CLK / DATA T_FLASH_CMD

VBAT_SYS 5M CAM
FCAM_I2C_SDA/SCL_1P8
MAIN
FEMiD 8M CAM
RCAM_AF_SDA/SCL_1P8
LMSWKSGU‐
TX_PA_OUT_GSMHB RCAM_SDA/SCL_1P8
K21
TX_PA_OUT_GSMLB
RGB Sensor 1EA
TX_PA_OUT_B1
(VEML3328)
TX_PA_OUT_B3 MMMB PA SENSOR_SDA/SCL_1P8
MAIN ANT TX_PA_OUT_B2_25 QM58110 TOP_RGB_SENSOR_SDA/SCL_1P8
TX_PA_OUT_B4_66 CODEC
TX_PA_OUT_B34_39
(ALC5665‐GRT)
CODEC_SDA/SCL_1P8
TX_PA_OUT_B20 TX_TR_OUT_LB
ANT_CON_MAIN1 TX_PA_OUT_B12_17 TX_TR_OUT_MB
to grip
TX_PA_OUT_B28
LCD BUCK
TX_TR_OUT_GSMLB (ISL98608IIZ‐TR5654)
TX_PA_OUT_B5_26
LCD_BUCK_SDA/SCL_1P8
MAIN_ANT_MB TX_PA_OUT_B8
Ant tuner RF Connector
DPX DPX
DPX252690DT‐ DPX202700DT‐ MAIN_ANT_LB
Wacom IC
QM13021 MS‐156C
5225A1K 4062A1 (W9019)
PEN_SDA/SCL_1P8

Audio AMP 2EA
VCC_2G_3G_SM (TAS2562HYFPR)
AMP_I2C_SDA/SCL_1P8
HB_MAIN_TRX
RFFE0 CLK / DATA MAIN / WIFI GRIP
ET MODULATOR 
VBAT_IN GRIP_I2C_SDA/SCL_1P8
(A96T356HF)
S5M7600X01‐7330
VCC1_ET_SM GRIP_WLAN_SDA/SCL_1P8
ANT_CON_MAIN1
GRIP I2C SDA/SCL
CPL_HP
TRCV
from main1 ant
GRIP  GRIP INT MAIN To FEMid  VBAT_SYS S5M9380X01‐L030 IF_PMIC_INT
SENSOR HB PAMid TYPE_C_INT
A96T356HF
VBAT_SYS QM78143 VRF_FEMID_1P8
VDD MAIN 3P0 LDO PRX_TR_IN_B30_40
GRIP LDO GRIP_LDO_EN
PRX_TR_IN_B7_38_41
A96T356HF
TX_TR_OUT_HB IF PMIC USB_D_P/N
I_USB_D_P/N
SUB ANT VDD WIFI GRIP 3P0 LDO CC_SDA/SCL_1P8 CC1/2 USB
IF_PMIC_SDA/SCL_1P8 (SM5713) SBU1/2 IF I_CC1/2
DRX_LMB I_SBU1/2 TYPE C
Conn
WATER_DET I_WATER_DET Conn.
USB_AP_D_P
AP_UART_RXD/TXD

RF Connector DPX DRX_ANT_LB


DPX202700DT‐ AP_THM
20449‐001E DRX_ANT_MB
4062A1 BAT_THM
SUB ANT RFFE3 CLK / DATA NVBUSOK CHG_THM
TR_THM
DRX_HB VRF_FEMID_1P8 WLAN_THM
BLANKET_THM

DRX_ANT_HB CA FEMID (LMSWKSGU‐K21)


RF Connector SPDT
DRX_TR_IN_B30_B40 HB PAMID (QM78143)
SPDT SPDT DRX_TR_IN_B7_B38_B41
LFEM (SFMLHT0W001)
20449‐001E MXD8621E
MXD8621E MXD8621E DRX_FEM DRX_TR_IN_B7_B38_B41
VDD_MIF_0P75 VRF_TXLO_1P8
SFMLHT0W001 DRX_TR_IN_B2_B3_B25_B39 Buck_1 VLDO_24
VDD_CPUCL1_0P75 VRF_TRX_1P2
DRX_TR_IN_B1_B4_B66_B34 Buck_2 VLDO_22
VDD_CPUCL0_0P75 VRF_TRX_1P2_LO
B7 SAW LNA
DRX_TR_IN_LB Buck_3 VLDO_23 Tranceiver
VDD_INT_0P75 VDD_1P0_CP
SAFFB2G59AA1F3K MXD8921HS Buck_4 VLDO_21 (S5M9380X01‐L030)
VDD_G3D_0P75 VRF_G_1P1
Buck_5 VLDO_26
VDD_CAM_0P75 VRF_TCXO_1P8
Buck_6 VLDO_20
VDD2_MEM_1P1
Buck_7
VDD_CP_0P75
GPS AMP
Buck_10 (MXDLN16U)

VDD_DLL_GNSS_0P75
VLDO_1
TCXO
(KT1612A26000ACW18TBT)
VDDQ_MMC_CARD_1P8_3P3
VLDO_2
GPS ANT VDDQ_DRAM0_0P6 AVDD_BTFM_1P1
GPS SAW GPS LNA GPS SAW VLDO_4 VLDO_27
SFHG89XA402 MXDLN16U SFHG89XA402
VDD_PLL_AUD_0P85 AVDD_LO_1P2
VLDO_5 VLDO_28
AVDD_MIPI_DPHY_1P2 AVDD_ANA_1P8
VLDO_6 VLDO_29 BT/WIFI Tranceiver
AVDD_PLL_CPUCL0_1P8
VLDO_7 VLDO_30
AVDD_BTDA_1P8 (S5N5C20X00-6030)
VLDO8_PMIC_0P75 AVDD_WL0_3P3
VLDO_8 VLDO_31,32 AVDD_WL1_3P3
VDD_G3D_M_0P75
VLDO_9
VDD_CPUCL1_M_0P75
VLDO_10
VDD_USB_0P75
VLDO_11 VRF_FEMID_2P8 ANT Switch
VLDO_25
VDD_USB20_0P85
WIFI ANT VLDO_12
S_ANT_COM_WLAN
2nd AVDD_D_P_1P8 VDD_CODEC_1P8
VLDO_13 VLDO_42
2GR_WL1
AVDD_USB20_PHY_3P3
Audio CODEC
2GTR_WL1 2.4G SAW 2GTR_WL1 SPDT VLDO_14 VDD_CODEC_3P3 (S5N5C20X00-6030)
SAFFB2G45MA0F3K BGS12SN6 2GT_WL1 VLDO_40
DPX AVDD_ADC_WLBT_0P8
RF Connector
DPX VLDO_15
LFD181G58 DPX105950DT‐ 5GR_WL1 AVDD_GPLL_GNSS_1P8
20449‐001E DP7D714 6016A1 VLDO_16 VDD_SIM_1P8_3P0
5GTR_WL1 SPDT VLDO_18
BGS12SN6
5GT_WL1 WIFI/BT IC AVDD_GPLL_GNSS_1P2
VLDO_17 VDD_T_FLASH_3P0
SIM / SD
S5N5C20X00‐6030 VLDO_35
AP VDD_UFS_1P8
WIFI ANT BT RF VLDO_33
VDD_CAM_M_0P75
VLDO_36 UFS
1st SP4T 2GR_WL0 VLDO_34 (THGAF8G9T43BAIR)
VDD_MIF_M_0P75
GRIP WLAN SDA/SCL
2GTR_WL0+BT 2.4G SAW 2GTR_WL0+BT MXD8648RG VLDO_43
2GT_WL0
WIFI GRIP  GRIP WLAN INT SAFFB2G45MA0F3K VDD_1P8_AP S PEN Control IC
S_ANT_COM_WLAN
VDD_1P8_AP VLDO_3
RF Connector DPX VLDO_3
SENSOR BT+WL0 DPX105950DT‐ 5GR_WL0
(W9019)
20449‐001E
MAIN PMIC
A96T356HF 6016A1
VDD WIFI GRIP 3P0 LDO 5GTR_WL0 SPDT 5GT_WL0 SPK AMP UP/DOWN
BGS12SN6
(TAS2562HYFPR)
(S2MPU09X01-6330)
Hall IC
(AH1897T‐FAN‐7‐71)

 ET Modulator 
PMIC_ONOB (S5M7600X01‐7330)

LCD_RST_N
SOC_RST_N
BUCK9_PMIC_LDO_2P0 Wake Up IC
LDO (DBMD8HD171D3BWRI)
LCD_CON_DET VDD_WAKE_CORE_1P1
Backlight IC PMIC_IRQB
LCD_BL_PWM_LDI
BUCK9_PMIC_LDO_2P0 FCAM_CORE_1P2
LED_K[1:4] PMIC_ONOB LDO
Buck_9 FCAM
LCD_MIPI_CLK_N/P SOC_WRST_N BUCK9_PMIC_LDO_2P0 CAM_VDDIO_1P8
FILTER LCD_MIPI_CLK_P/N LDO
AP_PMIC_CLK_32K VDD_RCAM_AF_2P8
LCD_MIPI_D[0:3]_P/N_F LCD_MIPI_D[0:3]_P/N BUCK9_PMIC_LDO_2P0 RCAM_CORE_1P2 LDO VDD_FCAM_A2P8
OCP_CPU
LDO RCAM VDD_RCAM_A2P8
W_PEN_VDD_3P3 W_PEN_VDD_3P3
VDD 1P8 AP LDO
CL 00~56 VDD 1P8 AP
VBAT_SYS
W_PEN_VREF1 W_PEN_VA_3P3 W_PEN_VA_3P3 PMIC_WRSTBI
70pin S‐PEN  VBAT_SYS
Connector LCD_BUCK_EN
VDD_LCD_5P8_P/N Buck SOC_PSHOLD
PEN_IRQ VBAT_SYS VBAT_SYS
Booster LCD_BUCK_SCL_1P8 LDO S PEN Control IC
PMIC_WRSTBI
S‐PEN  VBAT_SYS
LCD_BUCK_SDA_1P8
IF FPCB VBAT_SYS
IF SPEEDY_PMIC SPK AMP UP/DOWN
(TAS2562HYFPR)
PEN_FWEL XBOOTLDO VBAT_SYS
PEN_IRQ KEY
TSP_RST
PEN_PDCT PWRIRGTON_MAIN
TP_SPI_SS IF PMIC VBAT_SYS
LCD BACKLIGHT DRIVER IC
PEN_FWEL
TP_SPI_MISO
(SM5713) LCD BUCK BOOSTER
WACOM IC PEN_SDA_1P8 TLCM
PWRIRGTON_SUB

W9019 PEN_SCL_1P8 (10.4" WUXGA)


TSP_TA
CP_PWR_UP
VBAT_SYS MMMB PA
TSP_INT HB PAMid
TCXO_EN
Clock buffer IC
TP_spi_MOSI
VBATTERY_CON
ET MODULATOR
W_PEN_TXD
TP_spi_SCL
W‐PEN_RXD PEN_PDCT VDD_MAIN_GRIP_3P0_LDO
W_PEN_RESET_N
VBAT_SYS MAIN Grip Sensor
LDO
W_PEN_FWE0/1 DEBUGER PEN_SCL_1P8
PEN_SDA_1P8
PEN_IRQ VDD_WIFI_GRIP_3P0_LDO

Wifi Grip Sensor


PEN_PDCT VBAT_SYS
LDO
VDD_SENSOR_1P8
2EA Sensor FPCB 2EA
PEN_FWEL VBUS_IF

PEN_SDA_1P8 BATTERY
PEN_FWEL VBUS_USB

PEN_IRQ
PEN_SCL_1P8 OVP
(KTS1682)
VBUS_OVP IF
Conn.

PEN_LDO_EN
V_EWRITING_3P3 S‐PEN LDO
VBAT_SYS SPK_UP_OUT_SENSE_P/N

PMIC [I2C] AMP_I2C_SCL/SDA_1P8 AMP SPK_UP_OUT_P/N


[I2S] AMP_I2S_DI/DO/BCLK/LRCK
AMP_INT_N / AMP_RST_N (TAS2562) TOP SPK
VDD_1P8_AP PMIC
(S2MPU09X01-6330)

SPK_DN_OUT_SENSE_P/N

VDD_FCAM_A2P8 FCAM_MIPI_D0_N/P [I2S] VOICE_SPI_CLK/SS_N/MISO/MOSI


CLK_32K
AMP
Wakeup IC
SPK_DN_OUT_P/N
FCAM 
LDO
FCAM_CORE_1P2 FCAM_MIPI_CLK_N/P
FCAM_MIPI_D1_N/P VOICE_RST/VOICE_WAKE/VOICE_INT (TAS2562) BOT SPK
CAM_VDDIO_1P8
(DBMD8D)
5M CAMERA
FCAM_RST_N

FCAM_MCLK
EAR_L_DET
FCAM_SCL_1P8

FCAM_SDA_1P8
EAR_OUT_L/R
3.5pi
VDD_RCAM_AF_2P8
RCAM_MIPI_D0_N/P VDD_EAR_MIC_2P7 Earphone
RCAM_MIPI_D1_N/P EAR_MIC_P
RCAM  RCAM_MIPI_CLK_N/P

CODEC
RCAM_MIPI_D2_N/P
SM-P615/P617 LDO
RCAM_CORE_1P2
RCAM_MIPI_D3_N/P [I2C] CODEC_SCL/SDA_1P8
VDD_RCAM_A2P8 [I2S] CODEC_I2S0_LRCK/BCLK/DI/DO EAR_MIC_N
Common CODEC_IRQ_N / CODEC_MCLK_26M
(ALC5665)
EAR_OUT_FB
8M CAMERA RCAM_RST_N

RCAM_MCLK
VDD_MAIN_MICBIAS_2P7
MAIN_MIC_P/N
Main
RCAM_SCL_1P8 Analog MIC
RCAM_SDA_1P8
VDD_SUB_MICBIAS_2P7

RCAM_AF_SCL_1P8
SUB_MIC_P/N Sub
RCAM_AF_SDA_1P8
Analog MIC
Model :
VX_Setup(2019-06-18)_HHP
Created date of PCB data : TUE MAR 3 16:29:27 2020
Revision :
Manufacture Count :
SOC10000
L1036

TH10000
C1065 V1004

Charge :
R10009

C10018
C1066

V1007
V1010
L1035

L1037
R10008
L1044

L1022 C1035
V1003 C1135
U1006

L1043
C1036
C1002
C1037

L1023

U1000

C1078

C1079
U1004

GAS2001
L1024
C1038

SUS2002
L1009

C1080

C1039

Contact :
C1004
L1005

TP1001 TP1000

L1010

TP8009
V10019
TP8008

Date :
V10017
R8028
C8056
ZD8005

R4027

SOC8002
R4029
ZD8004

R8027
C8055

ANT10015
ANT7004

Routing :
RFS1000

ANT7005
V10010 V10012
C8054

ZD8003

C8059
L8006 C8057 L1007
ANT10007 ANT10003
C8041 V10006
C1005

V10014
C8058
C8060
U8007

L1053
C8043
C1006

C1010

C8064
ANT7007
C1086
F1000

Resin :
U8008
U8009

C1090
EAR10000
C1011
C8040
R8020

V10007

V10016

ANT10004

V10020
R8021

C8042

C1008

C1009
L1006

C8065 ANT7006 ANT10016


V10018

F1001

L1008 ZD1000 C1016


SOC7000

L1004 L1014

C1007 C1017

C10019
R1003

C1063

C1019 R1004 C1082


C1042 C1040 L1025 V10001 V10000 V10021
C1061 ZD1001 L1046
C1018

U1003

C1045 L1027 C1044 C1062 L1045


ANT10001

ANT10000

ANT10017

C1053 L1031 C1052 C1085


U1005

C1077
C1068 L1034 C1067
L1041
C1073 L1039 C1072
C1074
C1076 L1040 C1075
L1042

C1084 C1081 C1083


C1057

L1050 L1047 C1089 C1136


C1087

C1097

C1096
L1052

L1051

C1056

C1055
C1033

L1055 C1098 C1071


C2037

L1054

L1038

L2020
L2001

L2002

L1057 C1100 L1056


C1032

ZD7008 R7046 C1070


ZD7007
L2019

C1108 L1059 L1061 C1069


C7096
C7095

C1012

R1000

C1043
C1013

C1030

C1027

C1041
L1017
L1074

L1026

ZD7009 C7094 C1034


C7093

C1064
R7048 C1118 L1062 L1063
R7047 C2039
F1002

L2017

L1032
C1051
C1058

L1029
C1059
C1060

L1069 L1071
L7026 R7049
C1026
L1018

L1016

C1025 C1125 L1065 L1067

SC7004
C2038

L7024 L1033
C1131 C1133
L2016

R7043 C1054
C1048 L2018

F1003 U2001
C1029

L1070 L1072
C1047 C1050
F1004
L2000
C2029
TH1000

R1016

C1132

C1049 L1028
C1031

L1019 C1028 TP8006 TP8007


L2015

C2005
R7042

C1046 L1030
ZD7011

ZD7010
C1024

C2009

C2004

C2003

TP_ETDAC0_N

C2013
C7100
C7101

C2056

C1023 L1015 TP_RFFE1001

L7025
TP_ETDAC0_P

R2003
C1022

C1020 C1021

SOC8001
L1001
R7023

C7074
C7084

R7030
C7086

L7022
R4057
ZD3001

R3006

C3058
C3010
R7029

R7028

L7020

C3003

L7023 C3032 C3020 L3007 C3031 L3003 C3021


C2048 L3027
L3018

CLP3002
U3020

TP_FEM_CTRL3002

L3010
F3002
L3030
C2052

C2049
C2053

C3039 R3005
L3012

C3041
L3031
C1107

C1105 C1106 U3019 U3001

U2004
C2058 C3033
C1119

C2050

C2051

C3029

L3009

C3034

C3037
L3013

C1116 C1117 C2057 L3008 L3020


F3004

L3022 C3045
TH6003

U3022
L3006

L2038 C3027 L3029 C3028 C3042


L3019
C3046

C3048
C6113

R6034

R6033

C2055 L3021
C3030

C3024
C2054 L2031 C3066
C2069

C3043
SOC6000
C3019
F3005

L3032

C2059 C2071 TP_FEM_CTRL3003

C3000 L3000
C2060
U3000 U3021
U2005

L3001

C3018
C3001 RFS3001 CLP3000 CLP3001
C3049

C3067

C3035
L3015
C3056

C2061 L3025 C2068 C2064 C3047


R2004 C3015 U6005
C3036
C3054

C2066 L3026 R3002


C3052

C3053
L3024

C3050

F3006
C2067
C2063

C2062

C2065 C3055 R6009


C3002

C3004

C3057
U3023 C6095
C3011

C3009

TP_FEM_CTRL3001 TP_FEM_CTRL3000
C3022

R4010

TH4001
L3016

L3023
R3003 C3005
C8044

RFIC_CTRL3001 TP_FEM_CTRL3004 RFIC_CTRL3002 RFIC_CTRL3000

L8007 R6012

R4039 ZD6001
C8048

R4033 R4031
R8023

C8053 C8049
C8046

R8031
C8039

C8052 C8050 C6094


R8022
C8037 C8062 ZD8000 C8047
ZD8001
ZD8002

R6011
R4041 C8051
U8005

U8010

R8024

U8006

U6006
R8018

R8025

TP_3001
R8019

R6008
C3060

R6025
C3061

U3026
C8045

C8036 R6010
TH6001 C8061 C8038
ANT9010

C6096
C6108

R6026

R6032
V9016

L9024

C9040

L9025 SLC8000
C7007

C7001

R7035
R7022 R7021
C7092

R7033
C7087
R7038

R7041

L7000

C7002
C7027

C7025

C7089
R7020

C7090 C7091 C7088


R7037
C7003
C7022

C7024

C7006 C7000
C8021 TP7009 TP7011 R7027 C7049 C7045
C7063
U7000

R7017
U7016
R7015

C7081
TP7005 TP7004
C7080 C7047
R7050 L7014
C7079

TP7008
TP7006 C7085
C7050

SLC8001
C7082 R7051 R7010 C7019
TP7010
TP7007
C8018

C7078
C7018
C7048
C7073

C7072

R7026 R7032
R7006

U8000
C7023
C7069

C7068

U7014 R7012
C8016

C7021
C8017

C7044
TP7012
TP7003

C7113

C7026
TP7002

TP7000

TP7001

C8002 C7004 C7010


R4028
R8008

C8020

C7005

R4026 R7016
V9003

V9006

TP8003
TP7013

TP8002
C8003

R8006

C8001

R8003

R8005

C8000

R8004

C8019
ANT9003

OSC8000
R8010

R8007

C8014 C8015
C6042
L8000 L8001
U9003

C8035
C8004

C6040
ZD9001
TP6000
TP6003

TP6005

TP6002

C9015
HEA8000
C6038

C6071
XOM4001
U9002

R4054

R4055

R4053

R4052

C9017
C6037
C9016
L9008

TP_XRTC_XTO
C9018

R4005
R4032

R4030

R4023

R4020

R4017

R4021

R4024

R4047

R4035

R4043

TP6008
R4006

R4037

R4045

R4044

R4036

R4049

R4034

R4042
R4050

R4048

C9022 TP6001

C6073
XOM4000

ZD9000
C9021
SC7000

C9020 L9007
TP3000

C9019
UCP4000
L9049

L9036

TP7014

C4037
ANT9005

TP_XCP_RF_ON4000
ANT9015

TP_XRSTOUT_N

C4041 R5000
ZD9004

C9047

U9004 C4028 R4009

C4046 TH4000
L9035
C9049
L9048

C9048
V9008

V9005

V9026
TP4000

R9008
C6076

C4032
C4044

R6001

R4000 C4020

C4010 C4021

C4064 C4035

R4007 C4036
C4019

R4008 C4022

C4023

XCP_GPIO4000 C4042

C4009
R4001

R4014

R4013

R4003

R5003 TP_UFS_RX_N

C4024
CLP9000

CLP9003

C4045 C4006
R4002

R4004

TP_SPEEDY
IFC9000

TP_UFS_RX_P

C5010
TP5003

TP_XGNSS_GPLL_ANA_EXT
SOC9000

U5000
CLP9001

L7001
C7009

C7008
CLP9005

TP5004

TP5005
CLP9004

R7007
R7019
L7002

ZD7000
CLP9002

C7012

C7011
R6002

R6003

L7003
ANT7000 ANT7001
ZD7001

R7008
ANT9002

C9011

L9006

TP9000

ANT7002 ANT7003
TP9001

C9008

U9001
ZD9005

L9005 RFS9000
C9010

C9012

C9013

V9002
R9007

HEA6000
RFS9001
ANT9012

L9011

ANT3001 ANT3000
C9087

C9024
C9044
L9031
V9023

L9045
C9088

ANT3003 ANT3002
C9089

L9004
U9009
C9002

C6085

C6084
R9019

C9085
L9044

L9043

ZD6003

C9005

C9007
ANT9000

C9003

C3062
C3059

C3063

U3027
V9000 L9001
V9021

V9022
ANT9011

HEA4000

V2035
SUS2004

C4088

R7034

R7036

R7039

R7040
C9058

C9079

C9060

R7063
C9059

C9083

U9008
R7061
ANT9008

L9042

JTAG4003

C9077 R7062
C8022

L8004

C9078
C8030

R8012
F9000

C8012

U8003 TP8004

R8013
TP8005

C8031
JTAG4000

C9076
C8011

C8007

L9040
U8002
C9075

C8032
TP_UB

C9072
ANT9009

L9041 C9074
C8033
C8027
TP4001

C8029
C9073

R4046

R4019

U9007

R8001
C9090

C9082

C8024
ZD9007

R8035

R8034

U8004

V9012 C9023 L9013


F8003
SC7003

C8034
C8028

R8017
R8038
R8039

R8011

F8002
R8015
SOC8000
TP8000

R8014

R8016
R8033

R8032

F8000

L8003
D8000
C8023

C8025 C8026
R8037

R8036

F8004
R8041

R8040

F8001

L8002
C8009
TP8011

TP8010

C8010
TP8012
TP8013

JTAG4002
JTAG4001

C8013

C7066
L7021
C8006

C8005
U8001 R8009
C7083
C7075 C7077
U7015

C7076

R7031
C7071
C7109
CON7000

C7070 C7110

C7064

C7067
C7065
ZD7013
L2012

C2022

L2014

C2083 L2037 R7045


C2084 C2018
ZD7012

R7044
C2017

C2021
C2002

C2001

C2000

C2085

C2030
C2027

C2028

C2025
U2000

TH4002
C4100

R4051

C2033
F2001

C2035
C2023

C2020 C2019
F2002
SOC7001

F2000

GAS2002

C7106 C2024 C2026


L2004

C2016
C2034
C7105
TP2000

C2036
TP2001

C2011
C7104
C2012 TP3004 TP3003 TP3002 TP3001

L1076
L2025

C2043 L2011 L2009

U3024
C2042

L2024 C2010 C2015


C2076

TP_3000

L2023 C2082 L2010 L2008 C2077


C3064
C2074

L2033
C2081
L2035

CPL2000
TP_3002

C2078 L2036 C2075 C3065


ZD7014

C2073

L2032
C2080

L2034

L2003

L2006

C2079 C2072
ZD7006

L2005

R7056 R7055 R7054 R7053


C7037

C7035
C7031

C7038

C7036

L7007 L7006 L7005 L7004

U7004 U7005 U7006 U7007

SM-P615/P617
TH6002 C2044
ZD2001

L2021
C2046

R2001

C6109 C2031
L2026 C2040
R6027
C2032

R2000

SOC7002

R6028

ZD2000 L2007

L2013 C2014

CON2002
CON2000

Common
CLP2004
CLP2000
Model :
VX_Setup(2019-06-18)_HHP
Created date of PCB data : TUE MAR 3 16:29:27 2020
Revision :
Manufacture Count :
ANT1000

ANT1002
ANT1003

ANT1001

Charge :
V1000
V1002
V1001

L1021

V1008
C1003
L1003

C1001

L1020
L1011

L1012

V2024
U1001

V1009
ANT2012

V2025
C1014

L1013

V2033

V2032

C1015
ANT2013
V1005 V1006

Contact :
R1010

R1014

R1015

R1011

OSC2000
SC2000
C1124

C1126
V2027

V2026

L1066 L1068
C1130

Date :
U1008

C10007
L2029 C2070
R1009

R10001

L10012
L10004

C7052
L10011

C10005
C10011

C10004
C1128
R4016

C1114

C1115

L1058

U10001
R1017

R1018

R10005 C7051
TP_FLIPCOVER

R10006
ANT2006
L7015

ZD10002

Routing :
ZD10000
U1009

ZD10001
C1127

R8026

C8063

F8007 F8006 F8005

SUS10000 C1129
R1013

TP10002
L10014
C7054
ANT10014

ANT10012

SC7005

L10015 C1121
L7016

L7019

Resin :
R10002
L10006
V2012
ZD7002

C1122
C10016
R10000
V2013
C1113
C1112
C10009
L10010

F1005
C10012

U10003 C10015
C1088
L1048

L1049

C10006
C7053

C1111
R7025
ZD7003

C10010
L10013

ZD10003
V10002
ANT10013

ANT10011

C10013
U1007

R10007 TP10000 TP10001

C10008
R10004 C10017
C1123
U10000

R10003

C10014
L1064
C7098

C7103

C7097

L10009 C10003
R7024
R7018

L10008 C10002 V10005


C1110
TP1002

GAS10000
L10001

L1060
TP1003
C10000
C1109
C1120

L10002
L10000

C10001
R1001
C1099

C1091

R1002 C1093
L1075

R1008
C1092

R1007
C1095

C1094

C1104

C1102

C1101

C1103
V2011

V2010
ANT2005

R4056
RFS3000

R3001
C3038

ZD3000 L3011 R3000


CLP3004 CLP3003
V2003

V2002
U7012

U7013

V2006
ANT2003 ANT2001
V2007

C7057 C7059
ZD7004 ZD7005
C7058 C7061

C7056 L7017 L7018 C7060

C7055 C7062
V2009
V2008

ANT2004
C7013

C7014 C7016
U7001

C7108

C7032
C7033

R7011
C7015

C7020

L7013 C7017
C6110
R7013

C6033

C6032

C6039
C6028

C6002 C6030 C6111


C6044
C6023

C6029

C6026 C6019
C6035

C6034

C6072
C6021
C6060

C6024

C6041
OSC6000
L6007

C6027
C6020
C6070

C6069

C6078
C6006

C6080
C6075
C6074

C6004

L6000
SC7001 C6079

C6045
C6059

C6012
C6043
C6077

C6065
L6008
C6062
C6064

U6000
GAS9002
TP6004

L6009
C6055
C6053

C6063
L6004

TP6006
C6066
C6051

C6057 C6047 C6050 C6068


C6014

L6005

C6025
L6006

L6001

C6003
C6031

C6112
L6003

C6054
L6002
C4031

C6011
C6007

C6008

C6022
C6013
C4073

C6018
C6001
L6010

C6005
C4063

C6000

C5001 C6015

C4018 C6058 C6048 C4089 C4084


C6016
C6010

C5002 C4012 C4059


TP6007

C4050

C4040
C5000 C4060 C4048 C4085
C4062
C4086

C4082

C4030 C4081
C4079

C4025 C4029 C6036 C6067


C4038
C6049

C6009
C4026
C4053 C4016 C4027 C4015

C4083
C4017
C5017

C4066
C4074

C5015

C5016 C4067
C5011
C4013
C4069 C5014
C4051 C6056 C4058
C4070

C4043
C4080

C4077

C4014
C6052 C4076 C4049
C4065
C4061
C4078
C4002

C4001
C4052

C5013 C5018
C4000

C4005
C4007
C4033

C4034

C4047
C4003

C4004

C5019

C4054 C6046
C4087
C4008

C5020

C5021

C4068

C4071

C4056

C5012

C4075
C4011 C4039

GPS_I GPS_Q
R5004

C5022 L5000 TP5002

TP_UFS_TX_P

C5033 L5001
SUS9001

TP_UFS_TX_N

C5009 V9015

R9001 D9000 R9003 D9001

R9004 D9003 D9002


R9002
C5007
C5006
D9004

ZD9003
R9013

R9009
C5008 C5005
V2019
V2018

C5004
C5003 R9010
R9012

D9005

ZD9002

C9053
TP5000 TP5001

C9052
ANT2009

L9030
D9006

L9029

C9043
ANT2010
V2020

V2021

R9016

R9017

R9018

R9015
GAS9001

R9014
L9051

C9097

C9096
TP9002
L9050

R9023

R9022
C6104

C6105

C6103
TP6011
SC7002

C6107 R6023

R6014

C6100
C6093

TH6000 C6098
ZD6002

L6012 R6018
U6003

R6017

R6015

C6106 C6081
C6082 R6016

C6086
R6013

D6002
C6087
L6011

ZD6000
C6090
C6097

C6083

C6092

C6091

C6102 C6099
R8000

R6020 R6024
Q8000

U6007
TP6009

C6088
Q6000

R6019
R6007

C6089
D6001

C6101
R8002
R6000

R6022
D6000
R6004
R6021

R9011
V9027

C9091 C9092 C9093 L9046


V2022

V2023

ZD9006
C9095

U9010

L9047 C9094
ANT2011

GAS9003
C8066
U8011

C8067

CON7001 L7028

C7111
L3033

TP_WACOMCOVER

C3068

U3028
L3034

C7112

L7027

C7039
U7009

L7008

R7057

SM-P615/P617
R7000
U7010

R7058

C7042
U7008

L7011

R7060 V2015
ANT2007

C7043 V2014
U7002

L7012

R7059
R7001

R7002

U7011
C7030

C7029

Common
L7010

C7041
U7003

R7052
L7009

C7040
ANT2015

ANT2014
8. Level 3 Repair

8-3. Flow chart of Troubleshooting.

Oscilloscope Digital Multimeter

Power Supply + driver, ESD Safe Tweezer

8960 & Spectrum Analyzer Soldering iron

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-1. Power On

Mobile phone does not power on.

YES

Charging the battery by TA.


NO
Check the Battery Voltage. If its voltage level is extremely low
Is it more than 3.8V? (under 3.0V),
Change the battery.
YES

YES
Power-on the phone and
check the power-on sound. Change the LCD ASSY
Sound is ok?

NO

NO
Check the voltage level at C6094
while pressing power key. Replace the Power key FPCB
Is the voltage high?

YES
Check the output voltage of U6000
L6000> 0.75V, L6001 > 0.75V,
L6003 > 0.75V, L6004 > 0.75V,
NO
Check the signal of L6005 > 0.75V,
SOC_PSHOLD = 1.8V L6007 > 1.1V
L6008 > 1.3V
L6009 > 2.0V
L6010 > 0.75V
If the output voltage is not normal, Change the
YES
U6000.
※ Each voltage level has ±10% margin.

Check the initial operation

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-2. Initial

Initial Failure

YES

Re-download latest SW
on the mobile phone

Abnormal
No
Abnormal
Re Check "Power on" Check the U6000 (Crack etc)
Trouble shooting process

Normal

Change UCP4000

Abnormal

Change PBA

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-3. No Service

No service

YES

CP : P615XXX
Home screen → Phone → Keypad → Check the connection of RF coaxial cable
*#1234# → Check Phone version → CP :
P615XXX or unknown & U1000

YES

NO
Check the Voltage
C2059, C2048 : 1.2V, C2061 : 1.0V
Replace the U6000
C2056, C2057 : 1.8V

YES

NO
Check the clock U2005
Is the frequency 26MHz? Replace the U2005

YES

Replace the UCP4000

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-4. SIM Part

Insert SIM card

YES

NO
Is SIM socket FPCB ok? Replace SIM socket FPCB

YES

Change to the new SIM card.


NO
Check the SIM_TRAY_DET. If it doesn`t still work SIM card after changing the
= LOW (R7002)?
SIM card, Check the U6000 (Crack etc)

YES
YES

NO
Check the SIM RST / Data / CLK.
(SIM1 :U7008, U7010, U7009) Check the UCP4000 (Crack etc)
Is signal ok?

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-5. T-Flash Part

Insert T-Flash card

YES

NO
Is SIM socket ok? Replace SIM socket

YES

NO Change to the new T Flash card.


Check the T-flash Voltage.
(C7029) = 3.3V? If it doesn`t still work T Flash card after changing
the T FLASH card, Check the U6000 (Crack etc)

YES

Check the t-flash NO


CMD /Data/CLK.
(U7002, U7007, U7003) Check the UCP4000 (Crack etc)
Is signal ok?

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-6. Charging Part (Normal/Fast)

Insert TA / USB

YES

NO
Charging Sequence Start
VBUS_OVP (C6101) = 5V or 9V Replace USB IF PBA or IF FPCB

YES

NO

Check the
VBUS_IF (C6102)=5V or 9V Replace U6007

YES

NO
Battery is Charging? Replace U6003

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-7. OTG

OTG does not work

YES

NO
Check the Check U6003
VBUS_IF(L6011) = 5V (crack, open, damaged, etc.)

YES

NO
Check the Check U6007
VBUS_OVP(C6101) = 5V
(crack, open, damaged, etc.)

YES

NO
Check OTG working ? Replace USB SUB PBA or IF FPCB

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-8-1. 6Axis Sensor

6Axis Sensor does not work

YES

NO
Check U3024
Replace U3024
(crack, open, etc.)

YES

NO
Check the voltage Replace U3026
C3065 =1.8V

YES

Check 6Axis Abnormal


Check TP3001~4pin
(SPI is OK?) Replace UCP4000

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-8-2. RGB Light sensor

RGB Light Sensor does not work

YES

NO
Check sensor IC Replace sensor FPCB
(crack, damaged, etc.)

YES

NO
Check sensor contact Replace damaged contact
(contact is OK?)

YES

Check the voltage NO


C3059 = 3.3V Replace U3027
(Sensor’s LED voltage)

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-8-3. Hall Sensor

Hall Sensor of Main PBA does not work

YES

Check U3028 NO

(crack, damaged, etc.) Replace U3028

YES

NO

Check the voltage Replace U6000


C3068 =1.8V

YES

END

Hall Sensor of WIFI SUB PBA does not work

YES

NO
Check the U10001 Replace U10001
(crack, damaged, etc.) or Replace WIFI SUB PBA

YES

NO
Check the voltage Replace U6000
C10011 of Sub PBA =1.8V

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-9-1. Microphone Part - Main MIC

Check main microphone function


in voice call Speaker mode or Camcord mode

YES

Check t h e M a i n M I C No
FPCB Connection Reconnect Main MIC FPCB
with ANT7000~3

YES

No
Check the Main PBA L7001
= 2 .8V? Replace L 7 0 0 1 of Main PBA

YES

No
Check the M A I N _MIC_P at Main Replace Main MIC FPCB
PBA L7002?

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-9-2. Microphone Part - Sub(2nd) MIC

Check S u b ( 2 n d ) microphone function


in voice call Speaker mode or Camcord mode

YES

Check t h e S u b M I C NO
FPCB Connection Reconnect Sub MIC FPCB
with ANT7004~7

YES

NO
Check the Main PBA L7015
= 2 .8V? Replace L 7 0 1 5 of Main PBA

YES

NO
Check the S U B _MIC_P at Main PBA Replace Sub MIC FPCB
L7016?

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-10. Speaker Part

Check speaker function.


Play MP3 with maximum volume level.

YES

NO
Check C-clips of Main PBA Reconnect SPK TOP
U7012, U7013

YES

NO
Check C-clips of IF PBA
Reconnect SPK BTM
U9002, U9003

YES

Replace speaker module

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-3-11-1. Earjack Part – Rx

Check the Earphone Rx function


for playing MP3 with Max volume

YES

NO
Check Earjack mold of 3.5pi PCB Replace EAR10000 or 3.5pi PCB

YES

NO
Check the EAR C2C FPCB connection Reconnect EAR C2C FPCB
and SOC7000, SOC10000 or Replace EAR C2C FPCB

YES

NO
Check the below item
Resolder or change the L10006, R7042, L7014
DET : L10006, R7042, L7014
NO
YES

Check the below item NO


Left : R10006, L7024
Resolder or change the R10005, R10006, L7024,
Right : R10005, L7025 L7025

YES

NO
Check the CODEC IC (U7000) Resolder or Replace U7000

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-3-11-2. Earjack Part - Tx

Check the Earphone Microphone function with Headset Call or


Headset Camcording

YES

NO
Check Earjack mold of 3.5pi PCB Replace EAR10000 or 3.5pi PCB

YES

NO
Check the EAR C2C FPCB connection Reconnect EAR C2C FPCB
and SOC7000, SOC10000 or Replace EAR C2C FPCB

YES

NO
Check the Main PBA L7020 = 2 .8V? Resolder or change the L7020

YES

Check the below item NO


MIC P : R10007, L7025, L7022, C7018 Resolder or change the R10007, L7025, L7022,
MIC N : L7023, C7019
C7018, L7023, C7019

YES
Y
NO
Check the CODEC IC (U7000) Resolder or Replace U7000

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-12. BT/WIFI

BT/WIFI is not working

YES

NO
Check BT or WIFI fuction ON Enable BT or WIFI function.

YES

NO
Check the U6000
Check the Voltage
(Crack, open, damaged, etc)
C3009 = 1.8V

YES

NO
Check the Voltage
C3010,C3066 = 3.3V Resolder or change the C3010, C3066

YES

Check the status of NO


RFS3000 , RFS3001
(Check RF Cableing status) Resolder or change
the RFS3000, RFS3001 and change RF Cable

YES

NO Resolder or Replace of
Check the Status of U3020, F3002, U3019, U3001, F3004, U3022,
U3020, F3002, U3019, U3001, F3004, U3021
U3022, U3021

YES

Resolder or change U3000

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-13. GPS

GPS is not working

YES

NO
Check GPS function ON Enable GPS Function in the setting.

YES

NO
Check the Antenna contact 1. Resolder or Replace the RFS3000
RFS3000 and RF Receptacle connector 2. Replace RF Cable

YES

NO
Check (crack,open,etc)
Resolder or change the wrong element
U3020, F3005, U3023, F3006
(open, crack, deviation, etc)

YES

NO
Check 26M Clock at C2064 Replace the OSC2000

YES

NO
Check the voltage on
C6019 = 1.8 V Replace the U6000

YES

NO
Check if GNSS_LNA_EN
Replace the U3023, C3057
at R3003 is more than 0.9V

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-14. Display

LCD is still off after PWR ON

YES

NO
Check the connection of Reconnect the SOC8000
SOC8000

YES

NO
Check
Resolder or Replace the U8004
LED_27P =27V (C8025)

YES

NO
Check
VDD_LCD_1P8 (C8012) Resolder or Replace the U8003

YES

Check NO
VDD_LCD_5P8_P= 5.8V (C8031) Resolder or Replace the U8002
VDD_LCD_5P8_N= 5.8V (C8032)
NO

YES

Replace the Display module

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-15. 8M CAMERA

“Camera” function does not work

YES

NO
Check the Camera connector on Main
Reconnect the SOC8001
PBA

YES

Check the voltage Resolder or Replace U8037


NO
C8037 : 2.8V Resolder or Replace U8039
C8039 : 2.8V Resolder or Replace U8041
C8041 : 1.8V Resolder or Replace U8062
C8062 : 1.2V

YES

NO
Check the CAM_MCLK is
Replace the PBA
26Mhz (R8031)

YES

Replace the camera module

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-16. 5M CAMERA

“Camera” function does not work

YES

NO
Check the Camera connector on Main
Reconnect the SOC8002
PBA

YES

Check the voltage


NO
C8064 : 2.8V

C8041 : 1.8V Resolder or Replace U8009


YE
C8043 : 1.2V Resolder or Replace U8007
S
Resolder or Replace U8008

YES

NO
Check the FCAM_MCLK is
Replace the PBA
26Mhz (R8026)

YES

Replace the Front camera module

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-17. TSP

Touch Screen does not work

YES

NO
Check LCD Connector on MAIN PBA
Reconnect the SOC8000

YES

Check NO
VDD_LCD_1P8 (C8012) Resolder or Replace the U8003

YES

Check NO
VDD_LCD_5P8_P= 5.8V (C8031) Resolder or Replace the U8002
VDD_LCD_5P8_N= 5.8V (C8032)

YES

Replace the Display module

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-18. S-PEN

“S-Pen” function does not work

YES

NO
Check the Digitizer connector
Reconnect the SOC8000
on Main PBA

YES

NO
Check the voltage
Resolder or Replace U8001
C8006 : 3.3V

YES

NO
Check the OSC8000 is
Resolder or Replace OSC8000
16 Mhz (C8004)

YES

Replace the LCD Assy

YES

END

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-19. RX (GSM1800,1900 / WCDMA 1,2,4/ LTE 1,2,3,4,66)

Check NO
Resolder or Change
C1006 ≤ -65dBm? L1007,C1005,C1006, RFS1000,

YES

Check NO Resolder or Change


L1006 ≤ -65dBm? L1006, F1000,

YES

Check NO
Resolder or Change
L1004 ≤ -65dBm? L1004,L1008, F1001

YES

Check the Voltage at NO


C1012, C1013=1.8V Resolder or Change
C1012, C1013, U6000

YES

Resolder or Change
Check B1 B4 B66 C1020, C1022, C1021, U1003
B1,B4,B66 C1021 NO B2,B3 GSM1800/1900 C1023, C1024, C1025, U1003
B2,B3,GSM1800/1900
L1015
≤ -65dBm ?

YES

Resolder or Change
U2004

NO Resolder or Change
Receiver is OK?
UCP4000

YES
YES
END Receiver is
OK?

NO
Change
Main B’d

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-20. RX (GSM850,900 / WCDMA 5,8/ LTE 5,8,12,17,20,28)

Check NO
Resolder or Change
C1006 ≤ -65dBm? L1007,C1005,C1006, RFS1000,

YES

Check NO Resolder or Change


L1006 ≤ -65dBm? L1006, F1000,

YES

Check NO
Resolder or Change
L1014 ≤ -65dBm? L1014, F1001

YES

Check the Voltage at NO


C1012, C1013=1.8V Resolder or Change
C1012, C1013, U6000

YES

Resolder or Change
Check B5, B8, B12, B17, B20, B28, GSM850/900
B5, B8, B12, B17, B20, NO L1019, C1031, C1028
B28 GSM850/900
C1028
≤ -65dBm ?

YES

Resolder or Change
U2004

NO Resolder or Change
Receiver is OK? UCP4000

YES
YES
END Receiver is
OK?

NO
Change
Main B’d

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-21. RX (LTE 7,38,40)

Check NO
Resolder or Change
C1006 ≤ -65dBm? L1007,C1005,C1006, RFS1000,

YES

Check NO Resolder or Change


C1088 ≤ -65dBm? C1086, C1088, F1000

YES

Check the Voltage at NO


C1099=1.8V? Resolder or Change
C1099

YES

Check Resolder or Change


B7,38 C1117 NO B7, B38 C1116, C1119, C1117
B40 C1106 B40 C1105, C1107, C1106
≤ -65dBm ?

YES

Resolder or Change
U2004

NO Resolder or Change
Receiver is OK? UCP4000

YES
YES
END Receiver is
OK?

NO
Change
Main B’d

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-22. TX (GSM1800,1900 / WCDMA 1,2,4/ LTE 1,2,3,4,66)

Check NO
Resolder or Change
C1006 about 23dBm? L1007,C1005,C1006, RFS1000,

YES

Check NO Resolder or Change


L1006 about 23dBm? L1006, F1000

YES

Check NO Resolder or Change


L1004 about 23dBm? L1008, L1004, F1001,

YES

Check the Voltage at NO


C1012, C1013=1.8V? Resolder or Change
U1003

YES

Check
GSM HB C1040
B1 L1031 NO
B2 L1039 Resolder or Change
B3 L1034 C1018, C10190 Or each band component
B4/66 L1040
about 25dBm?

YES

Check the Voltage at NO


Resolder or Change
3V≤C1060≤4.5V C1059, C1060 , C2038, C2039, U2001,

YES

YES
Check
L1038(3G LTE) /L1045(2G) Resolder or Change
about 0dBm? U1005

NO

Rsolder or Change
C1069, L1038, U2004 (3G, LTE) /
C1082, L1045, U2004 (2G)

NO Resolder or Change
Transmitter is OK? UCP4000

YES
YES
END Transmitter is
OK?

NO
Change
Main B’d

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-23. TX (GSM850,900 / WCDMA 5,8/ LTE 5,8,12,17,20,28)

Check NO
Resolder or Change
C1006 about 23dBm? L1007,C1005,C1006, RFS1000,

YES

Check NO Resolder or Change


L1006 about 23dBm? L1006, F1000

YES

Check NO Resolder or Change


L1004 about 23dBm? L1014, F1001,

YES

Check the Voltage at NO


C1012, C1013=1.8V? Resolder or Change
U1003

YES

Check
GSM LB L1027
B5 L1062 NO
B8 L1065 Resolder or Change
B12/17 C1100 C1018, C10190 Or each band component
B20 C1098
B28 L1059
about 25dBm?

YES

Check the Voltage at NO


Resolder or Change
3V≤C1060≤4.5V C1059, C1060 , C2038, C2039, U2001,

YES

YES
Check
L1032(3G LTE) /L1041(2G) Resolder or Change
about 0dBm? U1005

NO

Rsolder or Change
C1054, L1032, U2004 (3G, LTE) /
C1074, L1041, U2004 (2G)

NO Resolder or Change
Transmitter is OK? UCP4000

YES
YES
END Transmitter is
OK?

NO
Change
Main B’d

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair

8-4-24. TX (LTE 7,38,40)

Check NO
Resolder or Change
C1006 about 23dBm? L1007,C1005,C1006, RFS1000

YES

Check NO Resolder or Change


C1088 about 23dBm? C1086, C1088, F1000

YES

Check the Voltage at NO


C1091=1.8V? Resolder or Change
C1091, , U6000

YES

Check the Voltage at NO


Resolder or Change
3V≤C1094≤4.5V L2016, U2001

YES

Check YES
C1102 Resolder or Change
about 0dBm? U1007

NO

Rsolder or Change
C1101, C1103, C1102, U2004

NO
Resolder or Change
Transmitter is OK? UCP4000

YES
YES
END Transmitter is
OK?

NO

Change
Main B’d

Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.

You might also like