APEC PUMP ENTERPRISE CORP.

ISO-9001

Horizontal Multistage Centrifugal Pumps

AHC/AHI , BHI/BHS

50 Hz
Pumps & Pumps
Index Horizontal Multistage Centrifugal Pumps

AHC/AHI , HBI/HBS (50HZ)

Index/Type Key -------------------------------------------------------------------- 02
AHC/AHI General Data --------------------------------------------------- 03
AHC/AHI 2 Performance Curve ---------------------------------------- 05
AHC/AHI 4 Performance Curve ---------------------------------------- 06
AHC 8 Performance Curve ---------------------------------------- 07
AHC 12 Performance Curve ---------------------------------------- 08
AHC/AHI 2, 4 Dimensions & Weights ------------------------------ 09
AHC 8, 12 Dimensions & Weights ------------------------------ 10
BHI/BHS General Data -------------------------------------------------- 11
BHI/BHS 2 Performance Curve --------------------------------------- 13
BHI/BHS 4 Performance Curve --------------------------------------- 14
BHI/BHS 8 Performance Curve --------------------------------------- 15
BHI/BHS 12 Performance Curve --------------------------------------- 16
BHI/BHS 2, 4 Dimensions & Weights ----------------------------- 17
BHI/BHS 8, 12 Dimensions & Weights ----------------------------- 18
Installation and Operating Manual ---------------------------------- 19
Nameplate ---------------------------------------------------------------------------- 21
Stages and Impeller for Nominal Flow Rate 8, 12 ---------- 22

Type Key

AHC- 2-20
Stages times 10
Pump Type 20: 2 stages
30: 3 stages
AHC : Cast iron version 40: 4 stages
(Discharge & Suction) 50: 5 stages
AHI : Stainless steel 304 version 60: 6 stages
BHI : Stainless steel 304 version (The stages are not applicable to 8,12)
BHS : Stainless Steel 316 version (Nominal Flow Rate 8, 12 please refer to page 22)

Nominal Flow Rate (m³ /h)

2 : 2 m³ /h
4 : 4 m³ /h
8 : 8 m³ /h
12 : 12 m³ /h

APEC PUMP ENTERPRISE CORP. 02

APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

AHC / AHI 50HZ

Feature
Reliability/Compact Form/Wide
Range
High Efficiency / Easy Maintenance
Application
Domestic / Light industry and
farming
Pressure boosting /Air-conditioning
systems / Cooling systems or
cooling machine

AHC AHI

Pump Operating conditions

The AHC and AHI series are non-self priming, Liquid:
horizontal multistage centrifugal pumps. Pump is AHC: Clean, non-aggressive and non-explosive liquids
coupled with motor at the same shaft and without solid particles or fibres.
mounted on a base-plate. The friendly design AHI : Clean, slightly aggressive and non-explosive liquids
makes the pump suitable for installation in the without solid particles or fibres.
small domestic or industrial water supply systems. Liquid temperature range: 0˚C ~ +90˚C
The pump is fitted with a mechanical seal and Maximum ambient temperature: +40˚C
through-going pump-motor shaft.
Maximum inlet pressure is limited by maximum operating
AHC : The discharge and suction chamber are pressure.
made of cast iron. The other parts of pump The maximum operating pressure depends on the temperature
in contact with the liquid are made of of the pumped liquid, see below table:
stainless steel.
Max. operating pressure 10 kg/cm2 6 kg/cm2
AHI : All parts of pump in contact with the liquid
AHC/AHI-2, 4 0˚C~+40˚C +41˚C~+90˚C
are made of stainless steel.
AHC-8, 12 0˚C~+55˚C +56˚C~+90˚ C

Min. inlet pressure: According to the NPSH curve +

Motor a safety margin of 0.5m.
Max. inlet pressure: Limited by the max. operating pressure.
The pump is fitted with a totally enclosed,
fan-cooled, squirrel-cage motor.
Rated speed : 2850rpm/50Hz
Enclosure Class: IP 54 Pipe connections
Insulation Class: F Connections AHC/I 2 AHC/I 4 AHC 8 AHC 12
Standard Voltages: 1Ø220~240V,50Hz, Suction port Rp 1” Rp 1 1/4” Rp 1 1/2” Rp 1 1/2”
3Ø220~240V /380~415V, 50Hz Discharge port Rp 1” Rp 1” Rp 1 1/4” Rp 1 1/2”
Drain hole, priming hole Rc 3/8” Rc 3/8” Rp 1/2” Rp 1/2”

Mechanical seals
List of Materials Mechanical Seals AHC/AHI
Q Silicon carbide CQB •
B Carbon CQQ Optional
U Tungsten carbide HUU Optional
E EPDM O-rings
V Viton E •
C Seal Type (general use) V Optional
H Seal Type (machine tool use) • Standard
*Spring is SS 316.
All technical information is subject to change without notice.
 Performance Range
H 60
[m] 50Hz
2850rpm
50

40
AHC 12

30
AHC 8

20
AHC/I 2 AHC/I 4

10

0
0 20 40 60 80 100 120 140 160 180 200 220 240 Q[L/M]

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Q[M³/H]

Construction & Material

2 7 4 3 9

8 3 4 9 1
1

10 2 7 6 5 9 10 8 6 5 9

AHC/I - 2 , 4 AHC - 8 , 12

Materials
No. Description AHC AHI
1 Suction chamber Cast iron SS304
2 Pump head Cast iron SS304
3 Intermediate chamber SS304 SS304
4 Impeller SS304 SS304
5 Spacing pipe SS304 SS304
6 Shaft SS431 SS431
7 Mechanical seal Silicon carbide/Carbon Silicon carbide/Carbon
8 O-ring EPDM EPDM
9 Drain and priming plug Steel SS304
10 Base plate Steel SS304

www.apecpump.com 04
APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

Performance Curve
H
[m]
AHC / AHI 2
60 ISO 9906 Annex A
AHC/I 2-60 50Hz 2850rpm
55

50
AHC/I 2-50
45

40
AHC/I 2-40
35

30 AHC/I 2-30

25

20 AHC/I 2-20

15

10

0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Q[m³/h]

0 10 20 30 40 50 60 Q[l/min]
NPSH Eta
[m] [%]
6 30
Eta
4 20

2 NPSH 10

0 0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Q[m³/h]

Electrical data, 2850 min -1

Pump type 1Φ 220-240V 3Φ ∆220-240V / Y 380-415V
P2 (HP) P2 (W) P1(W) I 1/1(A) P2 (HP) P2 (W) P1(W) I 1/1(A)
AHC/AHI 2-20 0.5 295 380 1.7-2.0 0.5 330 430 2.2-2.6 / 1.3-1.5
AHC/AHI 2-30 0.5 360 470 2.1-2.2 0.5 410 530 2.2-2.5 / 1.3-1.45
AHC/AHI 2-40 0.5 480 620 2.7-2.8 0.5 510 660 2.4-2.8 / 1.4-1.6
AHC/AHI 2-50 0.75 550 720 3.2-3.1 0.75 585 770 2.5-2.9 / 1.45-1.7
AHC/AHI 2-60 0.75 630 830 3.7-3.6 0.75 655 860 2.9-3.3 / 1.7-1.9

All technical information is subject to change without notice.

 Horizontal Centrifugal Multistage Pumps

Performance Curve
H
[m] AHC / AHI 4
55 ISO 9906 Annex A
AHC/I 4-60 50Hz 2850rpm
50

45
AHC/I 4-50
40

35
AHC/I 4-40
30
AHC/I 4-30
25

20
AHC/I 4-20
15

10

0
0 1 2 3 4 5 6 7 8 Q[m³/h]

0 20 40 60 80 100 120 140 Q[l/min]

NPSH Eta
[m] [%]
3 Eta 30

2 20

1 NPSH 10

0 0
0 1 2 3 4 5 6 7 8 Q[m³/h]

Electrical data, 2850 min -1

Pump Type 1Φ 220-240V 3Φ ∆220-240V / Y 380-415V
P2(HP) P2(W) P1(W) I 1/1(A) P2(HP) P2(W) P1(W) I 1/1(A)
AHC/AHI 4-20 0.5 430 560 2.6-2.5 0.5 465 610 2.4-2.9 / 1.4-1.7
AHC/AHI 4-30 0.5 595 770 3.6-3.5 0.5 604 790 2.5-2.9 / 1.5-1.7
AHC/AHI 4-40 0.75 735 960 4.4-4.1 0.75 770 1010 3.1-3.3 / 1.8-1.9
AHC/AHI 4-50 1 940 1160 5.3-5.0 1 990 1240 4.2-4.5 / 2.4-2.6
AHC/AHI 4-60 1.5 1135 1430 6.7-6.4 1.5 1180 1460 5.1-5.5 / 2.9-3.2

www.apecpump.com 06
APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

Performance Curve
H
[m]
AHC 8
60 ISO 9906 Annex A
AHC 8-60 50Hz 2850rpm
55

50
AHC 8-50
45

40
AHC 8-40
35
AHC 8-30
30

25
AHC 8-25
20 AHC 8-20

15

10

0
0 1 2 3 4 5 6 7 8 9 10 Q[m³/h]

0 50 100 150 Q[l/min]

NPSH Eta
[m] [%]
Eta 40
4

2 NPSH 20

0 0
0 1 2 3 4 5 6 7 8 9 10 Q[m³/h]

Electrical data, 2850 min -1

Pump Type 1Φ 220-240V 3Φ ∆220-240V / Y 380-415V
P2(HP) P2(W) P1(W) I 1/1(A) P2(HP) P2(W) P1(W) I 1/1(A)
AHC 8-20 0.75 595 760 3.3-3.2 0.75 620 810 2.9-3.3 / 1.7-1.9
AHC 8-25 -- - -- -- 1 860 1060 3.5-3.8 / 2.0-2.2
AHC 8-30 1 910 1130 5.2-5.0 1 1020 1260 4.3-4.8 / 2.5-2.8
AHC 8-40 1.5 1105 1390 6.3-6.1 1.5 1205 1520 5.7-6.3 / 3.3-3.7
AHC 8-50 2 1610 1940 8.2-8.1 1.5 1475 1860 5.7-6.3 / 3.4-3.7
AHC 8-60 2 1740 2090 9.0-8.8 2 1755 2110 6.5-7.0 / 3.8-4.1

All technical information is subject to change without notice.

 Horizontal Centrifugal Multistage Pumps

Performance Curve
H
[m] AHC 12
60 AHC 12-60 ISO 9906 Annex A
50Hz 2850rpm
55
AHC 12-50
50

45

40
AHC 12-40

35
AHC 12-30
30

25
AHC 12-20
20

15
AHC 12-10
10

0
0 2 4 6 8 10 12 14 Q[m³/h]

0 50 100 150 200 Q[l/min]

NPSH Eta
[m] [%]
5 Eta 50
4 40
3 30
2 NPSH 20
1 10

0 2 4 6 8 10 12 14 Q[m³/h]

Electrical data, 2850 min -1

Pump Type 1Φ 220-240V 3Φ ∆220-240V / Y 380-415V
P2(HP) P2(W) P1(W) I 1/1(A) P2(HP) P2(W) P1(W) I 1/1(A)
AHC 12-10 -- -- -- -- 0.5 455 590 2.8-3.1 / 1.6-1.8
AHC 12-20 1 935 1160 5.3-5.1 1 950 1170 3.8-4.0 / 2.2-2.3
AHC 12-30 1.5 1330 1680 7.8-7.4 1.5 1365 1690 5.7-6.5 / 3.3-3.8
AHC 12-40 2 1995 2400 11.0-10.6 2 1960 2350 7.3-7.6 / 4.2-4.4
AHC 12-50 3 2440 2910 12.7-12.2 3 2375 2820 8.8-9.0 / 5.1-5.2
AHC 12-60 -- -- -- -- 4 2860 3320 10.6-11.4 / 6.1-6.6

www.apecpump.com 08
APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

AHC/I 2 , 4 Dimensions & Weights

B1 Rp 1
B2
L4
Rc 3/8

H
AHC/I 2 : Rp 1
AHC/I 4 : Rp 1 1/4
Rc 3/8

L2
L3
L1

AHC 2,4
Pump Type Dimension (mm) Net weight (kg)
L1 L2 L3 L4 B1 B2 H
1phase 3phase 1phase 3phase 1phase 3phase
AHC 2-20 309 75 63 101 141 127 115 228 207 10.3 10.0
AHC 2-30 327 93 81 119 141 127 115 228 207 10.5 10.3
AHC 2-40 345 111 99 137 141 127 115 228 207 10.8 10.5
AHC 2-50 363 129 117 155 141 127 115 228 207 11.6 11.2
AHC 2-60 381 147 135 173 141 127 115 228 207 11.8 11.5
AHC 4-20 318 84 72 110 141 127 115 228 207 10.4 10.1
AHC 4-30 344 111 99 137 141 127 115 228 207 10.8 10.5
AHC 4-40 372 138 126 164 141 127 115 228 207 11.6 11.2
AHC 4-50 438 165 153 191 141 127 115 228 207 13.4 13.1
AHC 4-60 465 192 180 218 141 127 115 228 207 14.8 14.5

AHI 2,4
Pump Type Dimension (mm) Net weight (kg)
L1 L2 L3 L4 B1 B2 H
1phase 3phase 1phase 3phase 1phase 3phase
AHI 2-20 309 75 63 101 141 127 115 228 207 9.1 8.8
AHI 2-30 327 93 81 119 141 127 115 228 207 9.4 9.1
AHI 2-40 345 111 99 137 141 127 115 228 207 9.6 9.4
AHI 2-50 363 129 117 155 141 127 115 228 207 10.4 10.1
AHI 2-60 381 147 135 173 141 127 115 228 207 10.7 10.3
AHI 4-20 318 84 72 110 141 127 115 228 207 9.2 9.0
AHI 4-30 344 111 99 137 141 127 115 228 207 9.6 9.3
AHI 4-40 372 138 126 164 141 127 115 228 207 10.4 10.1
AHI 4-50 438 165 153 191 141 127 115 228 207 11.3 12.0
AHI 4-60 465 192 180 218 141 127 115 228 207 13.6 13.4

All technical information is subject to change without notice.

 Horizontal Centrifugal Multistage Pumps

AHC 8 , 12 Dimensions & Weights

B1 AHC 8 : Rp 1 1/4
B2 AHC 12 : Rp 1 1/2
L4

RP 1/2

RP 1 1/2
H3

H4
H2
H1

RP 1/2
ø8.5

108 L2 138
130 L3 160
L1 Fig. 1

B1 AHC 8 : Rp 1 1/4
B2 AHC 12 : Rp 1 1/2
L4

RP 1/2

RP 1 1/2
H3

H4
H2
H1

RP 1/2
ø8.5

126 L2 138
160 L3 240
L1 Fig. 2

AHC 8,12
Dimension (mm) Fig. Net Weight
1 phase 3 phase [ kg ]
Pump Type
L1 L2 L3 L4 B1 B2 H1 H2 H3 H4 L1 L2 L3 L4 B1 B2 H1 H2 H3 H4 1 Φ 3 Φ 1Φ 3Φ
AHC 8-20 320 54 41 77 181 135 110 187 239 245 320 54 41 77 181 114 110 187 239 224 1 1 17.2 17
AHC 8-25 - - - 107 - - 110 187 239 - 390 84 71 107 181 114 110 187 239 224 - 1 - 19.1
AHC 8-30 390 84 71 107 181 135 110 187 239 245 390 84 71 107 181 114 110 187 239 224 1 1 19.5 19.2
AHC 8-40 390 84 71 107 181 135 110 187 239 245 390 84 71 107 181 114 110 187 239 224 1 1 20.7 20.5
AHC 8-50 480 162 111 137 185 152 110 187 239 262 420 114 101 137 181 114 110 187 239 224 2 1 28.5 21.4
AHC 8-60 480 162 111 137 185 152 110 187 239 262 480 162 111 137 185 139 110 187 239 249 2 2 28.7 27.6
AHC 12-10 - - - 77 - - 110 187 239 - 320 54 41 77 181 114 110 187 239 224 - 1 - 17.9
AHC 12-20 360 54 41 77 181 135 110 187 239 245 360 54 41 77 181 114 110 187 239 224 1 1 18.4 18.2
AHC 12-30 390 84 71 107 181 135 110 187 239 245 390 84 71 107 181 114 110 187 239 224 1 1 20.6 20.4
AHC 12-40 450 132 81 107 185 152 110 187 239 262 450 132 81 107 185 139 110 187 239 249 2 2 27.7 26.7
AHC 12-50 480 162 111 137 185 152 110 187 239 262 480 162 111 137 185 139 110 187 239 249 2 2 29.8 29.9
AHC 12-60 - - - 137 - - 122 199 251 - 501 162 111 137 196 150 122 199 251 272 - 2 - 35.2

www.apecpump.com 10
APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

BHI / BHS 50HZ

Feature
Reliability/Compact Form/Wide Range
High Efficiency / Easy Maintenance
Suitable for slightly corrosive liquids.
Application
> Water supply and pressure boosting
> Air-conditioning
> Water treatment
> Heating and cooling in industrial
processes
> Industrial washing and dish-washing
machines Softened water
> Pressure boosting of process water
> Fertilizer/dosing systems

BHI BHS

Pump Liquids to be pumped

A horizontal, multistage centrifugal pump is made of These pumps are designed for pumping freely flowing
stainless steel. The pump is a non-self priming type non-corrosive, non-explosive, and non-flammable
and fitted with a mechanical shaft seal. liquids. The liquids to be pumped must also be free of
solid matter, sands, fibers, and similar materials.

Most common non-highly corrosive watery liquids, oily

Motor liquids, hot and cold liquids can be pumped with these
Totally enclosed and fan-cooled standard motor. pumps.
Rated speed : 2850rpm/50Hz
Enclosure Class: IP 54 The suitability of these pumps for pumping any
Insulation Class: F particular liquid depends upon a number of factors,
Standard Voltages: 1Ø220~240V,50Hz, such as the ph value, contents of chemicals such as
3Ø220~240V /380~415V, 50Hz chlorides, oils, the temperature of the liquids, etc..

Operating conditions Pipe connections

Liquid temperature range: 0 °C ~+110 °C
Connections BHI/S 2 BHI/S 4 BHI/S 8 BHI/S 12
Maximum ambient temperature: +40 °C Suction port Rp 1” Rp 1 1/4” Rp 1 1/2” Rp 1 1/2”
Maximum operating pressure: 10 kg/cm²
Discharge port Rp 1” Rp 1 1/4” Rp 1 1/2” Rp 1 1/2”
Maximum inlet pressure is limited by maximum
Drain hole, priming hole G 3/8” G 3/8” G 3/8” G 3/8”
operating pressure.

Mechanical Seals
List of Materials Mechanical Seals BHI BHS
Q Silicon carbide RQQ Optional •
B Carbon RQB • Optional
E EPDM
V Viton O-rings
R Seal Type (general use) E • •
•Spring is SS316. V Optional Optional
•Standard

All technical information is subject to change without notice.

 Performance Range
H
[M] 50Hz
60 2850rpm

50
BHI/S 12
40

30
BHI/S 2 BHI/S 4 BHI/S 8
20

10

0
20 40 60 80 100 200 300 Q[L/M]

1 2 4 6 8 10 20 Q[M³/H]

Construction & Material

8 5 4 3 1

9 7 6 2

Materials
No. Description BHI BHS
1 Pump casing SS304 SS316
2 Suction inter-connector SS304 SS316
3 Chamber SS304 SS316
4 Impeller SS304 SS316
5 Cover plate SS304 SS316
6 Shaft SS431 SS316
7 Mechanical seal Silicon carbide/Carbon Silicon carbide/Silicon carbide
8 O-ring EPDM EPDM
9 Base plate Steel Steel

www.apecpump.com 12
APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

Performance Curve
H
[m] BHI/S 2
ISO 9906 Annex A
50Hz 2850rpm
60
BHI/S 2-60

50
BHI/S 2-50
NPSH
[m]
40 4
BHI/S 2-40 NPSH

30 BHI/S 2-30 3

20 BHI/S 2-20 2

10 1

0 0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 Q[m³/h]

0 10 20 30 40 50 60 Q[l/min]

Eta
[%]
60
Eta
40
20
0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Q[m³/h]

Electrical data, 2850 min -1

Pump Type 1Φ 220-240V 3Φ ∆220-240V / Y 380-415V
P2(HP) P2(W) P1(W) I 1/1(A) P2(HP) P2(W) P1(W) I 1/1(A)
BHI/BHS 2-20 0.5 280 360 1.7-1.9 0.5 290 370 2.0-2.7 / 1.2-1.6
BHI/BHS 2-30 0.5 365 470 2.3-2.2 0.5 430 550 2.4-2.8 / 1.4-1.6
BHI/BHS 2-40 0.5 455 580 2.7-2.6 0.5 505 650 2.4-2.7 / 1.4-1.6
BHI/BHS 2-50 0.75 550 720 3.2-3.3 0.75 620 810 2.7-3.0 / 1.6-1.8
BHI/BHS 2-60 0.75 635 830 3.8-3.6 0.75 690 910 2.9-3.3 / 1.7-1.9

All technical information is subject to change without notice.

 Horizontal Centrifugal Multistage Pumps

Performance Curve
H
[m] BHI/S 4
ISO 9906 Annex A
50Hz 2850rpm
60
BHI/S 4-60

50 BHI/S 4-50

40 BHI/S 4-40
NPSH
[m]

30 BHI/S 4-30 NPSH 6

20 BHI/S 4-20 4

10 2

0
0 1 2 3 4 5 6 7 Q[m³/h]

0 20 40 60 80 100 120 Q[l/min]

Eta
[%]

Eta 60
40
20
0
0 1 2 3 4 5 6 7 Q[m³/h]

Electrical data, 2850 min-1

Pump Type 1Φ 220-240V 3Φ ∆220-240V / Y 380-415V
P2(HP) P2(W) P1(W) I 1/1(A) P2(HP) P2(W) P1(W) I 1/1(A)
BHI/BHS 4-20 0.5 450 580 2.7-2.6 0.5 515 660 2.5-2.9 / 1.5-1.7
BHI/BHS 4-30 0.5 635 820 3.9-3.7 0.5 650 850 2.8-3.0 / 1.6-1.7
BHI/BHS 4-40 0.75 765 1000 4.6-4.4 0.75 810 1060 3.3-3.5 / 1.9-2.0
BHI/BHS 4-50 1 1005 1240 5.8-5.5 1 1060 1310 4.2-4.5 / 2.4-2.6
BHI/BHS 4-60 1.5 1210 1510 7.1-6.9 1.5 1230 1550 5.2-5.6 / 3.0-3.3

www.apecpump.com 14
APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

Performance Curve
H
[m] BHI/S 8
ISO 9906 Annex A
50Hz 2850rpm
60
BHI/S 8-30

50 BHI/S 8-25
NPSH
[m]
40 BHI/S 8-20 4

30
BHI/S 8-15 3
NPSH
BHI/S 8-20M
20 2
BHI/S 8-10

10 1

0 0
0 2 4 6 8 10 Q[m³/h]

0 20 40 60 80 100 120 140 160 180 Q[l/min]

Eta
[%]
Eta 60
40
20
0
0 2 4 6 8 10 Q[m³/h]

Electrical data, 2850 min -1

Pump Type 1Φ 220-240V 3Φ ∆220-240V / Y 380-415V
P2(HP) P2(W) P1(W) I 1/1(A) P2(HP) P2(W) P1(W) I 1/1(A)
BHI/BHS 8-10 0.75 580 760 3.3-3.1 0.75 620 810 2.7-3.1 / 1.6-1.8
BHI/BHS 8-20M -- -- -- -- 1 910 1120 4.2-4.5 / 2.4-2.6
BHI/BHS 8-15 1 930 1150 5.3-5.1 1 965 1190 3.9-4.4 / 2.3-2.6
BHI/BHS 8-20 1.5 1130 1420 6.8-6.6 1.5 1150 1450 5.0-5.5 / 2.9-3.2
BHI/BHS 8-25 2 1560 1880 8.1-7.9 1.5 1460 1840 5.8-6.5 / 3.4-3.8
BHI/BHS 8-30 2 1750 2100 9.1-9.0 2 1710 2050 6.4-6.9 / 3.7-4.0

All technical information is subject to change without notice.

 Horizontal Centrifugal Multistage Pumps

Performance Curve
H
[m] BHI/S 12
ISO 9906 Annex A
50Hz 2850rpm
60 BHI/S 12-30

BHI/S 12-25
50

NPSH
[m]
40
BHI/S 12-20 8

NPSH
BHI/S 12-15
30 6

BHI/S 12-10
20 4

BHI/S 12-05
10 2

0
0 2 4 6 8 10 12 14 Q[m³/h]

0 50 100 150 200 250 Q[l/min]

Eta
[%]
Eta 60
40
20
0
0 2 4 6 8 10 12 14 Q[m³/h]

Electrical data, 2850 min-1

Pump Type 1Φ 220-240V 3Φ ∆220-240V / Y 380-415V
P2(HP) P2(W) P1(W) I 1/1(A) P2(HP) P2(W) P1(W) I 1/1(A)
BHI/BHS 12-05 -- -- -- -- 0.5 425 550 2.4-2.8 / 1.4-1.6
BHI/BHS 12-10 1 945 1170 5.3-5.1 1 965 1190 3.6-3.8 / 2.1-2.2
BHI/BHS 12-15 1.5 1310 1650 7.6-7.5 1.5 1345 1690 5.5-6.0 / 3.2-3.5
BHI/BHS 12-20 2 1925 2310 10.6-10.4 2 1960 2350 7.0-7.4 / 4.0-4.3
BHI/BHS 12-25 3 2510 2980 13.1-12.7 3 2420 2880 9.0-9.3 / 5.2-5.4
BHI/BHS 12-30 -- -- -- -- 4 3110 3610 11.7-12.1 / 6.8-7.0

www.apecpump.com 16
APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

BHI/BHS 2 , 4 Dimensions & Weights

BHI/S 2 : Rp 1
BHI/S 4 : Rp 1 1/4

G 3/8

H
G 3/8

L1

BHI/BHS 2
Pump Type Dimension (mm) Net Weight
1phase 3phase kg
L1 H L1 H
BHI/BHS 2-20 403 255 403 233 9.6
BHI/BHS 2-30 403 255 403 233 9.9
BHI/BHS 2-40 403 255 403 233 10.1
BHI/BHS 2-50 403 255 403 233 10.8
BHI/BHS 2-60 403 255 403 233 11.0

BHI/BHS 4
Pump Type Dimension (mm) Net Weight
1phase 3phase kg
L1 H L1 H
BHI/BHS 4-20 403 255 403 233 9.6
BHI/BHS 4-30 403 255 403 233 9.9
BHI/BHS 4-40 403 255 403 233 10.6
BHI/BHS 4-50 441 255 441 233 12.1
BHI/BHS 4-60 441 255 441 233 12.3

All technical information is subject to change without notice.

 Horizontal Centrifugal Multistage Pumps

BHI/BHS 8 , 12 Dimensions & Weights

204
142
G 3/8”
RP 1 1/2 RP 1 1/2

F
A

C
B

Ø10 Ø10
G 3/8” L2 L4

D L3 L5

E L1

BHI/BHS 8
Pump Type Dimension (mm) Net Weight(kg)
L1 A
1PH 3PH
L2 L3 L4 L5 1PH 3PH B C D E F 1 PH 3PH
BHI/BHS 8-10 403 403 181 171 138 162 255 233 118 243 108 132 141 10.20 10.02
BHI/BHS 8-15 441 441 181 171 138 162 255 233 118 243 108 132 141 12.28 12.08
BHI/BHS 8-20M -- 441 181 171 138 162 -- 233 118 243 108 132 141 -- 11.98
BHI/BHS 8-20 441 441 181 171 138 162 255 233 118 243 108 132 141 13.54 13.34
BHI/BHS 8-25 514 -- 200 180 195 235 267 -- 121 245 158 178 177 23.08 --
-- 441 181 171 138 162 -- 233 118 243 108 132 141 -- 13.92
BHI/BHS 8-30 514 514 200 180 195 235 267 261 121 245 158 178 177 23.14 22.22

BHI/BHS 12
Pump Type Dimension (mm) Net Weight(kg)
L1 A
1PH 3PH
L2 L3 L4 L5 1PH 3PH
B C D E F 1 PH 3PH
BHI/BHS 12-05 -- 403 181 171 138 162 -- 233 118 243 108 132 141 -- 9.41
BHI/BHS 12-10 441 441 181 171 138 162 255 233 118 243 108 132 141 11.72 11.52
BHI/BHS 12-15 441 441 181 171 138 162 255 233 118 243 108 132 141 13.38 13.18
BHI/BHS 12-20 514 514 200 180 195 235 267 261 121 245 158 178 177 22.52 21.48
BHI/BHS 12-25 514 514 200 180 195 235 267 261 121 245 158 178 177 25.74 24.36
BHI/BHS 12-30 -- 539 230 198 195 245 -- 284 133 259 174 198 197 -- 30.20

www.apecpump.com 18
APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

AHC/AHI , BHI/BHS
Installation and operating manual
1.HANDLING
Before installation, these installation and operating instructions must be
read carefully.
The product must be lifted and handled with care.
2.APPLICATIONS
AHC,AHI: Designed to handle clean, thin, non-aggressive water and
non-explosive liquids, no solid particles.
BHI,BHS: Designed to handle clean, thin and non-explosive liquid
without particles.
That also can be used in light industry application.

3.WORKING LIMITS
AHC, AHI
●Max. operating pressure:
0˚C to +40˚C −>10 kg/cm², +41˚C to +90˚C −> 6 kg/cm².
●Liquid temperature range: 0˚C ~ +90˚C.
●Max. ambient temperature: +50˚C.
●Min. inlet pressure:
According to the NPSH curve + a safety margin of 0.5m.
●Max. inlet pressure: Limited by the max. operating pressure.
BHI,BHS
●Max. operating pressure: 10 kg/cm².
●Liquid temperature range: 0˚C ~ +110˚C.
●Max. ambient temperature: + 40˚C.
●Min. inlet pressure:
According to the NPSH curve + a safety margin of 0.5m.
●Max. inlet pressure: Limited by the max. operating pressure.
4.INSTALLATION
●The pump may be installed as shown in Fig.1.

5.ELECTRICAL CONNECTION
●Position of terminal box (Fig.2)
The terminal box can be turned to three positions before the
pump is installed.
 Horizontal Centrifugal Multistage Pumps

6.Others (Fig.4)
●Priming
Before start up, to fill the pump body and suction pipe through the
priming plug, bleeding off all the air.

●Maintenance
No routine maintenance is required.
●Frost protection
Pumps which are not being used during periods of frost should be
drained to avoid damage.
Remove the priming and drain plugs and allow the pump to drain.
Do not replace the plugs until the pump is to be used again.

7.TROUBLE SHOOTING
Fault Possible cause
1. Supply failure
Pump does not run Main contacts in motor starter are not making contact or the motor coil is faulty.
when the motor
starter is operated. Control circuit fuses have cut or are defective.
Pump is blocked by unknown matters.
2. Motor is failure.
Pump runs but gives Pump is not fill with liquid.
no water. Pump is blocked by unknown matters.
The suction or discharge pipe is blocked by unknown matters.
The foot or non-return valve is blocked or failure.
The suction pipe is leakage.
The suction lift is too great.
The air is in suction pipe or pump.
3. Pump takes in air.
Pump capacity is not The pump, suction pipe or discharge pipe is partly blocked by unknown matters.
constant or is reduced.
The inlet pressure is too low.
Wrong direction of rotation (three phase).
The suction lift is too great.
The foot or non-return valve is partly blocked.

4. Overload setting is too low.

Starter overload cut The cable connection is loose or faulty.
off immediately when One fuse is blown.
the power is switched Pump is not free to run.
on.
Contacts in overload are faulty.
The motor winding is defective.

www.apecpump.com 20
APEC PUMP ENTERPRISE CORP.

Horizontal Centrifugal Multistage Pumps

Nameplate

1
5
2 Model : TYPE :
6
3 P2 : kw HP Q: LPM H : M
7
4 Supply : V HZ ø Hmax : M F.L.A. : Amp
8
MEI ≥ S/N : Made in Taiwan

10 9
1.Pump Model
2.Output
3.Voltage
4.Minimum Efficiency Index
5.Pump Type
6.Rated Capacity & Head
7.Electric Current
8.Pump Weight
9.Maximum Head
10.Serial Number
 Horizontal Centrifugal Multistage Pumps

AHC(I) 8 Stages and Impeller

Pump Type Stages Impeller
AHC(I) 8-20 1 1 Big impeller
AHC(I) 8-25 2 2 Small impeller
AHC(I) 8-30 2 1 Big impeller + 1 Small impeller
AHC(I) 8-40 2 2 Big impeller
AHC(I) 8-50 3 2 Big impeller + 1 Small impeller
AHC(I) 8-60 3 3 Big impeller

AHC(I) 12 Stages and Impeller

Pump Type Stages Impeller
AHC(I) 12-10 1 1 Small impeller
AHC(I) 12-20 1 1 Big impeller
AHC(I) 12-30 2 1 Big impeller + 1 Small impeller
AHC(I) 12-40 2 2 Big impeller
AHC(I) 12-50 3 2 Big impeller + 1 Small impeller
AHC(I) 12-60 3 3 Big impeller

BHI(S) 8 Stages and Impeller

Pump Type Stages Impeller
BHI(S) 8-10 1 1 Big impeller
BHI(S) 8-15 2 1 Big impeller + 1 Small impeller
BHI(S) 8-20 2 2 Big impeller
BHI(S) 8-25 3 2 Big impeller + 1 Small impeller
BHI(S) 8-30 3 3 Big impeller
BHI(S) 8-20M 2 2 Small impeller

BHI(S) 12 Stages and Impeller

Pump Type Stages Impeller
BHI(S) 12-05 1 1 Small impeller
BHI(S) 12-10 1 1 Big impeller
BHI(S) 12-15 2 1 Big impeller + 1 Small impeller
BHI(S) 12-20 2 2 Big impeller
BHI(S) 12-25 3 2 Big impeller + 1 Small impeller
BHI(S) 12-30 3 3 Big impeller

www.apecpump.com 22
 APEC Pump ENTERPRISE CORP.
3F.,No.394,Sec.2 Mingzhi Rd.,
Taishan Dist.,New Taipei City 243,Taiwan.
Tel : +886-2-29034567
Fax: +886-2-29064567
www.apecpump.com

Vol. PIAH-19071