Structural Analysis 2 Solved MCQs (Set-1)
Structural Analysis 2 Solved MCQs (Set-1)
c
nature of force in any diagonal member in the left half of the span would
M
A. change from compression to tension
B. change from tension to compression
C. always be compression
D. always be tension
Answer: A
6. For a two-hinged arch, if one of the supports settles down vertically, then the
horizontal thrust
A. is increased
B. is decreased
C. remains unchanged
D. becomes zero
Answer: C
7. The deflection at any point of a perfect frame can be obtained by applying a unit
load at the joint in
A. vertical direction
B. horizontal direction
C. inclined direction
D. the direction in which the deflection is required
Answer: D
8. The principle of virtual work can be applied to elastic system by considering the
virtual work of
A. internal forces only
B. external forces only
C. internal as well as external forces
D. none of the above
Answer: C
12. The fixed support in a real beam becomes in the conjugate beam a
A. roller support
B. hinged support
C. fixed support
D. free end
Answer: D
13. For a symmetrical two hinged parabolic arch, if one of the supports settles
horizontally, then the horizontal thrust
A. is increased
B. is decreased
C. remains unchanged
D. becomes zero
Answer: B
14. A load 'W T maximum bending moment at 0.4 1 from the left support is
A. 0.16 wl
B. 0.20 wl
C. 0.24 wl
D. 0.25 wl
Answer: C
15. In the displacement method of structural analysis, the basic unknowns are
A. displacements
16. In moment distribution method, the sum of distribution factors of all the
members meeting at any joint is always
A. zero
B. less than 1
C. 1
D. greater than 1
Answer: C
17. The width of the analogous column in the method of column analogy is
A. 2/ei
B. 1/ei
C. 1/2 ei
D. 1/4 ei
Answer: B
18. L EI
A. l/ei
B. l/2ei
C. l/3ei
D. l/4ei
Answer: A
21. While using three moments equation, a fixed end of a continuous beam is
replaced by an additional span of
A. zero length
B. infinite length
C. zero moment of inertia
D. none of the above
Answer: A
23. W L x x
A. 0.211 l
B. 0.25 l
C. 0.234 l
D. 0.5 l
Answer: A
24. Bending moment at any section in a conjugate beam gives in the actual beam
A. slope
B. curvature
C. deflection
D. bending moment
Answer: C