CSS-78 - Q0 Las1 Final

7/8
TLE - ICT (COMPUTER SYSTEM

SERVICING)
Activity Sheet – Quarter 0 – MELC 1
Plan and Prepare for Tasks to be
Undertaken
REGION VI – WESTERN VISAYAS

TLE 7/8 – ICT (Computer System Servicing)
Activity Sheet No. 1 ‘
First Edition, 2020
Published in the Philippines

By the Department of Education
Region 6 – Western Visayas
Republic Act 8293, section 176 states that: No copyright shall subsist in any
work of the Government of the Philippines. However, prior approval of the
government agency or office wherein the work is created shall be necessary for
exploitation of such work for profit. Such agency or office may, among other things,
impose as a condition the payment of royalties.
This Learning Activity Sheet is developed by DepEd Region 6 – Western

Visayas.
ALL RIGHTS RESERVED. No part of this learning resource may be

reproduced or transmitted in any form or by any means electronic or mechanical
without written permission from the DepEd Regional Office 6 – Western Visayas.
Development Team of TLE 7/8 – ICT (CSS) Activity Sheets
Writer: ANITA A. DUPAL-AG

AIZA A. ALPAY
Illustrators:
Editors: ARNOLD P. MAHINAY
Layout Artist:
Schools Division Quality Assurance Team:

ARNOLD P. MAHINAY
JESSIE P. BATOSIN
Division of San Carlos City Management Team:

ANTHONY H. LIOBET, CESO VI
JULITO L. FELICANO
ANTONIO G. UY
ARNOLD P. MAHINAY
Regional Management Team

MA. GEMMA M. LEDESMA
JOSILYN S. SOLANA
ELENA P. GONZAGA
DONALD T. GENINE
APRIL C. VELEZ
ABRAHAM P. IMAS
Introductory Message
Welcome to TLE 7/8 – ICT (Computer System Servicing)!
The Learning Activity Sheet is a product of the collaborative efforts of the

Schools Division of San Carlos City and DepEd Regional Office VI - Western
Visayas through the Curriculum and Learning Management Division (CLMD). This is
developed to guide the learning facilitators (teachers, parents and responsible
adults) in helping the learners meet the standards set by the K to 12 Basic Education
Curriculum.
The Learning Activity Sheet is self-directed instructional materials aimed to

guide the learners in accomplishing activities at their own pace and time using the
contextualized resources in the community. This will also assist the learners in
acquiring the lifelong learning skills, knowledge and attitudes for productivity and
employment.
For learning facilitator:
The TLE 7/8 - ICT (Computer Systems Servicing) Activity Sheet will help
you facilitate the leaching-learning activities specified in each Most Essential
Learning Competency (MELC) with minimal or no face-to-face encounter between
you and learner. This will be made available to the learners with the references/links
to ease the independent learning.
For the learner:
The TLE 7/8 - ICT (Computer Systems Servicing) Activity Sheet is

developed to help you continue learning even if you are not in school. This learning
material provides you with meaningful and engaging activities for independent
learning. Being an active learner, carefully read and understand the instructions then
perform the activities and answer the assessments. This will be returned to your
facilitator on the agreed schedule.
Quarter 0 – Week 1
Learning Activity Sheets (LAS) No. 1
Name of Learner:
Grade and Section: Date:
TLE 7/8 – ICT (COMPUTER SYSTEM SERVICING) LEARNING ACTIVITY SHEET

Plan and Prepare for Tasks to be Undertaken
I. Learning Competency
LO 1. Plan and prepare for tasks to be undertaken
(TLE_IACSS 9-12UHT- IIIa-17)
1.1 Identify tasks to be undertaken properly
1.2 Identify and select appropriate hand tools according to the task
requirements
II. Background Information for Learners
Planning for The Task to Be Undertaken Includes Proper Tool Selection:
How would you select the most ideal tools for the work? To start with,
know and comprehend in detail the extent of work to be refined, second, plan
for the scope taking into account the sequence of tasks.
On the other hand, selecting the finest tool for each task requires
training in the proper use of the tools, field experience in their safe use, and
following the manufacturer’s guidance and instructions for that specific tool.
To be proficient future computer technicians you need to have toolkit

that contains all necessary tools in repairing and maintaining computer
systems. It is important that you also know its function and uses. The
following are the must have tools of a computer technician:
HAND TOOLS
1. Flat head screwdriver – used to 8.Needle-nose plier – used to hold
loosen or tighten slotted Screws small parts.
2. Philips head screwdriver – used to 9.Needle-nose plier – used to hold
loosen or tighten crosshead screws. small parts.
3.Torx screwdriver - used to loosen or 10.Wire cutter – used to strip and cut
tighten screws that have a star-like wires.
depression on the top. 11.Flashlight – used to light up areas
4.Hex driver –used to tighten nuts in that you cannot see
the same way that a screwdriver well.
tightens screws.
5. Part retriever – used to retrieve parts 12.Soldering Lead- used to join
from location that are too small for your together metal work pieces
hand to fit.
6. Soldering iron -used to join two or 13.Wire Stripper - used to strip the
more metal conductors with the support electrical insulation from electric wires.
of soldering lead melted around it.
7.Crimping Tool- used to conjoin two 14.Tweezers – used to manipulate
pieces of metals by deforming one or small parts.
both that causes it to hold together.
CLEANING TOOLS
1.Lint-free cloth – used to clean 3.Compressed air – used to blow away
different computer components without dust and debris from different computer
scratching or leaving debris parts without touching the components.
2.Cable ties – used to bundle cables 4.Parts organizer – used to hold screw,
neatly inside and outside of a computer. jumpers, fasteners and other small parts
and prevents them from getting mixed
together
DIAGNOSTIC TOOLS
1.Multimeter - used to test the integrity 3.Loopback Adapter – used to test the
of circuits and the quality of electricity in functionality of
computer components. computer ports.
2.Lan Tester -designed to check most 4.Toner Probe –used to generate a

network cable wiring. tone for tracing cables between rooms
in a building.
Electrostatic Discharge (ESD) TOOLS
1. Anti-static wrist strap – used to 2. Anti-static mat – used to stand on or
prevent ESD damage to computer place hardware on to prevent static
equipment. electricity from building up.
III. Accompanying Deped Textbooks and Educational Sites
K to 12 Basic Education Curriculum Technology and Livelihood Education

Computer Servicing Learning Module Exploratory Grade 7 and 8.
IV. Activity Proper:
Use Me
Directions: To train yourself to become future computer technician, you
volunteer to help your neighbor working in the computer shop. He asks you to assist
him in identify the tool to be used in his tasks which are listed on the table. Write
your answer on the blank TOOLS column below.
TASKS TOOLS
1.Used for testing the integrity of circuits and the
quality of electricity in computer components.
2.Used to loosen or tighten slotted screws.
3. Used to loosen or tighten crosshead screw.
4. Used to prevent ESD damage to computer
equipment.
5. Used to release or fix screws that have a star-like
slots on top.
6.Used to retrieve parts from a location that are too
small for your hand to fit.
7. Used to light up areas that you cannot see well.
8. Used to clean different computer components
without scratching
9. Used to bundle cables neatly inside and outside of
a computer.
10.Used to join two or more metal conductors with the
support of soldering lead melted around it.
V. Reflection (on a separate sheet of paper)
What are the importance of hand tools in our daily life? Is it helpful?
_____________________________________________________________
_____________________________________________________________
VI. Answer Key:
Activity Sheet No. 1
Use me:
1.Loopback adapter
2.Flat-head screw driver
3.Philips-head screw driver
4.Anti-static wrist strap
5.Torx screw driver
6.Part retriever
7.Flashlight
8. Lint-free cloth
9. Cable ties
10.Soldering iron

CSS-78 - Q0 Las1 Final

Uploaded by

Copyright:

Available Formats

CSS-78 - Q0 Las1 Final

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CSS-78 - Q0 Las1 Final

Uploaded by

Copyright:

Available Formats

7/8

TLE - ICT (COMPUTER SYSTEM

REGION VI – WESTERN VISAYAS

Published in the Philippines

This Learning Activity Sheet is developed by DepEd Region 6 – Western

ALL RIGHTS RESERVED. No part of this learning resource may be

Development Team of TLE 7/8 – ICT (CSS) Activity Sheets

Writer: ANITA A. DUPAL-AG

Editors: ARNOLD P. MAHINAY

Schools Division Quality Assurance Team:

Division of San Carlos City Management Team:

Regional Management Team

The Learning Activity Sheet is a product of the collaborative efforts of the

The Learning Activity Sheet is self-directed instructional materials aimed to

For learning facilitator:

For the learner:

The TLE 7/8 - ICT (Computer Systems Servicing) Activity Sheet is

Learning Activity Sheets (LAS) No. 1

Grade and Section: Date:

TLE 7/8 – ICT (COMPUTER SYSTEM SERVICING) LEARNING ACTIVITY SHEET

II. Background Information for Learners

Planning for The Task to Be Undertaken Includes Proper Tool Selection:

To be proficient future computer technicians you need to have toolkit

2.Lan Tester -designed to check most 4.Toner Probe –used to generate a

III. Accompanying Deped Textbooks and Educational Sites

K to 12 Basic Education Curriculum Technology and Livelihood Education

IV. Activity Proper:

V. Reflection (on a separate sheet of paper)

VI. Answer Key:

Activity Sheet No. 1

You might also like