Abbott ADD Instrument Service Advisory
Abbott ADD Instrument Service Advisory
Subject: AxSYM Diagnostic Software for Windows 2000 / XP Document #: ISA 83-169A
Originator: David W Pitts/ADD_DAL_HUB/ADD_HUB/ADD/US Product: AxSYM (83)
Approved For Release:Jack B. Hall/ADD_DAL_HUB/ADD_HUB/ADD/US Site of Document Control: Dallas
Published Date: 12/07/2005 Effective Date: 04/08/2003
Classification: Software
This ISA obsoletes ISA 83-169. Changed sections are indicated with @.
I. Distribution
Worldwide
II. Purpose @
The AxSYM Diagnostic Software, ADS v2.03, has been validated (package DA-S 00674.000) for use
on computers running the Windows XP operating system. The application has not changed. If you are
already using v2.03 of ADS on your Windows 2000 computer, there is no need to reinstall it. ADS
Version 2.03 is now approved for use with Windows 2000 and Windows XP environments.
NOTE: Version 2.03 (DA-S 00674.000) should only be installed on systems using the Windows
2000 or Windows XP operating systems.
IV. Procedure @
Purpose: To install AxSYM Diagnostic Software System: Windows 2000 or Windows
version DA-S 00674.000. XP Operating Systems
Tools and None Estimated Time: 3 minutes
Materials Installation: 2 minutes
Required: Verification: 1 minutes
Abbott Confidential
** Potential Biohazard & Voltage Hazard. Observe Proper Safety Precautions at all Times.**
ISA - 83-169A Page 2
Installation:
Action Step Reference
Remove old 1. Access local Hard Drive. NOTE: Delete any previous versions of AxSYM
versions of 2. Verify that a "DiagSW" folder does Diagnostic Software before attempting to
Diagnostics not exsist on the Hard Drive. install this software.
Software 3. If a "DiagSW" folder exists, delete
the folder and its contents.
Install the 1. To install the software, click on the NOTE: If the software installation fails, the old
Software ADS2.03.exe attachment in the program must be removed before atempting
Administartive Notes section. to reinstall the software. Follow the
2. Select Finish after the software de-installation instructions and then
installation is complete. re-install the Software.
Verify 1. Double-click the AxSYM Diagnostic
Software Software W2k Icon, on the
Installation Desktop.
2. Verify that the Diagnostic Software
Main Menu appears.
3. Select Perform Tests from the task NOTE: When installed on Windows XP the desktop
bar. icon will appear as it does for Windows
4. Verify that the following Diagnostics 2000.
Programs are available in the
Perform Tests Menu Box.
Indicator Lights
LLS Noise
Sensors
Switches
5. Select Cancel to return to the Main
Menu.
Close 1. Select Exit from the task bar.
Program 2. Select Exit, then select Confirm
Exit, to close the program.
END OF DOCUMENT
Abbott Confidential
** Potential Biohazard & Voltage Hazard. Observe Proper Safety Precautions at all Times.**