0% found this document useful (0 votes)
174 views1 page

HL7 Configuration Worksheet

1. This document provides an HL7 configuration worksheet for setting up firewall installation and HL7 communications between an Abbott ARCHITECT instrument and the laboratory information system. 2. It lists the facility information, HL7 configuration information including IP addresses and port numbers for the instrument interface, firewall, and SCC HL7 receiver settings. 3. The worksheet shows the firewall WAN IP address and ports that the instrument interface software needs to communicate through to specific ARCHITECT SCC computers to enable result transmission.

Uploaded by

Amilcar Savelli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
174 views1 page

HL7 Configuration Worksheet

1. This document provides an HL7 configuration worksheet for setting up firewall installation and HL7 communications between an Abbott ARCHITECT instrument and the laboratory information system. 2. It lists the facility information, HL7 configuration information including IP addresses and port numbers for the instrument interface, firewall, and SCC HL7 receiver settings. 3. The worksheet shows the firewall WAN IP address and ports that the instrument interface software needs to communicate through to specific ARCHITECT SCC computers to enable result transmission.

Uploaded by

Amilcar Savelli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ISA ARCH-014 AbbottLink Firewall Installation to Support ARCHITECT HL7 LIS Communications

HL7 Configuration Worksheet


Facility Name
Street (Delivery Address)
Building & Floor
City, State, ZIP Code, Country
Abbott Service Representative

HL7 Configuration Information


Customers **SCC HL7 channel (sender) settings ** SCC HL7 channel (receiver)
* HL7 Instrument Interface settings (supplied by customer) settings
Architect System Firewall Firewall IP Address Port number IP Address Port number
Number WAN IP Address WAN Port
9001 172.016.001.101 9000
9002 172.016.001.102 9000
9003 172.016.001.103 9000
9004 172.016.001.104 9000
9005 172.016.001.105 9000
9006 172.016.001.106 9000
9007 172.016.001.107 9000
9008 172.016.001.108 9000
9009 172.016.001.109 9000

* The IP Address and port that the customers HL7 instrument interface software will need to communicate to the specific Architect SCC computer.
Note: The Firewall WAN IP address is the same for all instruments attached to this firewall.

** ARCHITECT SCC TCP/IP ports configuration screen settings – refer to ARCHITECT System Operations Manual for information on configuring the
TCP/IP ports settings.

End of Document

** Potential Biohazard & Voltage Hazard. Observe Proper Safety Precautions at all Times.**

Page 1 of 1

You might also like