文件名称: Curtain U Rail 说明书 设计师：

TJY 完成时间：
2020/11/18

版本号: Curtain-U Rail-EN-2006 成品尺寸：

83*110mm
材质和工艺：
封面 157g铜板
内页 128g铜版纸，骑马钉

更改内容：
增加表头（备注：此页从虚线下开始印刷，表格不印刷）

www.switch-bot.com
Contents

1. In the Box

2. Device Instruction

3. What You’ll Need before Installation

4. Installation

5. Control

6. Settings

7. Charging, Firmware and Factory Reset

8. Specification

9. Return and Refund Policy

10. Contact and Support

Want to see how it’s done?

Go to support.switch-bot.com for

installation videos and additional tips.

1
 In the Box Device Instruction

Motor U Rail
Hook Wheel

Main Body Hook Pairs*

Reset Button Hook Clip

Type-C Charging Port

Indicator Light &

Hook
Light Sensor

Clip Type-C Cable

* One of the Hook Pairs is attached to the Main Body upon delivery

2 3
 What You’ll Need before Installation Installation

• A compatible phone or tablet with Bluetooth 4.2 or above

• Download the SwitchBot App

• A SwitchBot Account

• Wi-Fi if you want to enable Cloud Service Step 1: Add Device

• Charge the Curtain for about 4 hours
After downloading the App, go to

Add Device from the left side

menu. Then select Curtain.

Follow the App instruction and

App Store Google play
add your device.

4 5
Select the Right Curtain Track Select the Open Mode

I Rail
H＞6.0mm

18.0mm ≥ W ≥ 8.0mm

Rod

Diameter
15.0mm - 40.0mm

U Rail W ≥ 12.5mm

H > 6.0mm

8.0mm > W > 6.0mm

For single side curtain, tap For double side curtain, tap
"Open from right to left" or "Open from middle".
"Open from left to right"
depending on which way
you want to open your
curtain.

6 7
Step 2: Install on Your Curtain Track

Retrofitting is simple with SwitchBot Curtain. It only takes a 1. Please fully close your curtain and then detach the end

few seconds to make your existing curtains smart. It is curtain hook from the track.

straight forward and intuitive with our App instruction. 2. Following the diagram, attach the Curtain's main body
and the other Hook to the curtain track between the first
and the second curtain clip. Then rotate them by 90° facing
each other and attach the other Hook back to the main
body.
Notice:
- The SwitchBot LOGO should face your room.
- If a Hook is attached to the main body, you can
detach it by pushing down the Hook clip and detach it from
the main body.

3. Put the curtain back in place so the Curtain is hidden.

8 9
Install the Clip (Optional) Step 3: Calibration

If you use double side curtain, you need two SwitchBot Calibration is for your Curtain to adapt to your existing

Curtains to open it from the middle. Alternatively, you can use curtain track. You need to calibrate before finishing the

the auxiliary Clip we provide to turn it into a single side curtain Installation or every time you change the Open Mode. You

so that you only need one SwitchBot Curtain. may redo the calibration after installing within the Settings.

To do that, fully close the curtain so the 2 panels are closest to

each other. Connect the upper parts of the two panels by

using the Clip. Draw the curtain back and forth to make sure

the two panels move as one. Then you can refer to Step 2:

Install on Your Curtain Track on how to set the Curtain up.

10 11
 Control

Lots of convenient ways to control, at your will.

Voice Control and Home Automation*

App Control Smart living is powered by your voice

commands. Wouldn't it be great to
Open and close the curtain at your
just say it?
fingertip. We offer intuitive App
control for iOS and Android, with “Alexa, close the curtain.”

weekly/bi-weekly updates following “OK Google, close my bedroom curtain.”

feedback from you. OTA firmware “Hey Siri, open the living room curtain.”

update is also available for better * Require SwitchBot Hub Mini (sold separately).
user experience.

Touch & Go Control with SwitchBot Remote

(Sold Separately)
Even with SwitchBot Curtain, you'd
probably still instinctively draw the A wireless remote add-on for you to
curtains by hand sometimes. When place anywhere.
it senses you drawing the curtain,
the SwitchBot Curtain will kick in and
do the work for you. We call this
Touch & Go.

12 13
App Control Touch & Go

Even with SwitchBot Curtain, you‘d probably still instinctively

draw the curtains by hand sometimes. When it senses you
drawing the curtain by more than 5 cm*, the SwitchBot
Curtain will kick in and do the work for you.

For double side curtain, drawing on one side of curtain will

trigger both Curtains to open or close simultaneously.

“Touch & Go” is turned on by default. To turn off, go to

“Advanced Settings”, and turn off “Touch & Go”.

* 5 cm is the best threshold we tested because it lowers the possibility

Single side curtain Double side curtain of false trigger by your cats and dogs.

App Store Google play

14 15
Voice Control and Home Automation* SwitchBot Scene

You need to turn on Cloud Service in Settings and then You can set up SwitchBot Scene for home automation within
connect respective service. Voice command can trigger the SwitchBot eco-system when you turn on the Cloud
fully open and fully close. Service within the Settings. There are unlimited possibilities.

Alexa, close the curtain.

Curtain Remote
OK Google, close my bedroom curtain.

Hey Siri, open the living room curtain.

Curtain Solar Panel

* Require SwitchBot Hub Mini (sold separately).

Curtain Hub Mini Meter

16 17
Control with SwitchBot Remote (Sold Separately)
Settings

Tap the gear icon on the Home Page near the Curtain icon to

You can pair a Remote in the Settings. go to the Settings. Or tap the Curtain icon to go to the Control

Please place your phone, Remote and page.

Curtain close to each other before

pairing. The rule of thumb for the
distance would be within your eye
sight. One key on the Remote can
trigger one action of your single side
curtain or double side curtain. For
example, a key can trigger the curtain
to close OR open. Please refer to
Remote user manual for the best
support.

18 19
Light Sensing Delay

You can set up 1 Delay for countdown action. You can set the
countdown time, percentage of opening or closing, and
Motion Mode.
The light sensing feature allows
triggering your device by sunlight.
It's still in the beta stage and
upgrading continuously, so please
explore the details in the latest App.
Please send feedback via the
SwitchBot App in the left side menu
with the details. Your feedback is
very much appreciated.

20 21
Schedule Motion Mode

You can set up 5 Schedules on board, or unlimited Schedules

with a Hub. You can set the day, time, percentage of opening
or closing, and Motion Mode.
Performance Mode is the default
mode with more powerful strength*
but higher noise level.
Silent Mode has lower noise level
with less powerful strength. The best
use case would be waking up with
sunshine.

* Up to 8 kg / 17 pounds of curtain.

22 23
 Charging, Firmware and Factory Reset

Charging Motor U Rail

Hook Wheel

It takes about 10 hours to fully charge the battery and the

1

battery lasts 8 months after a full charge2. You may also

purchase our Solar Panel to charge by sunlight3. Reset Button Hook Clip

Type-C Charging Port

1. 5V 1A adapter is required to charge with adapter.
Indicator Light &
Hook
Light Sensor
2. Battery life is tested under condition of runway of 3 meters,
loaded with 8 kg of curtain, opened and closed twice day, 25℃.
Battery life may vary given different condition.
Firmware
3. Illuminance Level 5 is required to charge with Solar Panel.

Please make sure you have the up to date firmware by

upgrading in time.

24 25
Factory Reset
Specification

Long press the button for 15 Model Number: W0701600

Color: White / Black
seconds until the LED light lights up.
Material: ABS plastic with UV-Resistant coating
Then release the button. If you are
Product Size (Main Body): 42mm x 51mm x 110mm
using double side curtain, you will Product Net Weight (Main Body): 135g
need to redo the calibration on both Power: Type-C, DC 5V 1A, 3350 mAh Lithium-ion Battery. Or by
Curtains. Solar Panel1
Battery Life: 8 months2. Or unlimited with Solar Panel
Connectivity: Bluetooth 5.0 Long Range
Sensor: Accelerometer, light sensor
Caution: Strength: Up to 8 kg / 17 pounds of curtain
Max Runway: 3 meters
You may lose all the settings after Factory Reset and you may
Mode: Silent Mode / Performance Mode
need to add the device again and re-calibrate. Timer: Up to 5. Or unlimited with a Hub3
Voice Control (Hub Required): Amazon Alexa, Google Assistant,
Siri Shortcuts, SmartThings, IFTTT, and LINE

26 27
 Return and Refund Policy

1. Solar Panel is sold separately.

This product has one-year warranty (start from the purchasing

2. Battery life is tested under condition of runway of 3 meters, loaded with 8 kg

day).

of curtain, opened and closed twice day, 25℃. Battery life may vary given
The situations below do not fit the Return and Refund Policy

different condition. • Intended damage or abuse.

3. Hub is sold separately. • Inappropriate storage (drop down or soaking in water).
• User modify or repair.
Note: Use under regular temperature only. • Using loss.
• Force majeure damage (Natural disasters).

The batteries are not in the warranty.

28 29
 Contact and Support
CE Warning

Manufacturer's Name: Woan Technology (Shenzhen) Co., Ltd.

Sample Description: SwitchBot Curtain
Setup and Troubleshooting: support.switch-bot.com
Trade Mark: SwitchBot
Support Email: [email protected] Model number: W0701600

Feedback: Please send feedback via the SwitchBot App in the left Operating Temperature: -20°C~60°C
This product is a fixed location. To comply with RF exposure requirements, a
side menu with the details of the issue. minimum separation distance of 20cm must be maintained between the user’s
body and the device, including the antenna. Use only the supplied or an
approved antenna.
This device in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. All essential radio test suites have been
carried out.
1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
2. The device complies with RF specifications when the device used at 20cm
from your body.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This equipment has

30 31
 KCC Warning

been tested and found to comply with the limits for a Class B digital device, 인증받은자의 상호: Woan Technology (Shenzhen) Co., Ltd.
pursuant to part 15 of the FCC Rules. These limits are designed to provide 제품명/모델명: 특정소출력 무선기기(무선데이터통신시스템용 무선기기) /
reasonable protection against harmful interference in a residential installation. W0701600
This equipment generates uses and can radiate radio frequency energy and, if 제조자 및 제조국가: Woan Technology (Shenzhen) Co., Ltd. /China
not installed and used in accordance with the instructions, may cause harmful 제조년월: 2020.06
interference to radio communications. However, there is no guarantee that 인증번호: R-R-Woa-W0701600
interference will not occur in a particular installation. If this equipment does 이 장치는 보안성이 없으므로 통신보안에 위배되는 사항의 통신을 금지하며 운용 중
cause harmful interference to radio or television reception, which can be

NCC 警語：
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following

依據低功率電波輻射性電機管理辦法
measures:

第十二條
• Reorient or relocate the receiving antenna.

※經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更
• Increase the separation between the equipment and receiver.

頻率、加大功率或變更原設計之特性及功能。
• Connect the equipment into an outlet on a circuit different from that to which

第十四條
the receiver is connected.

※低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應
• Consult the dealer or an experienced radio/TV technician for help.The device

立即停用，並改善至無干擾時方得繼續使用。
has been evaluated to meet general RF exposure requirement. The device can

-前項合法通信，指依電信法規定作業之無線電通信。
be used in portable exposure condition without restriction.

-低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
Warning: Changes or modifications to this unit not expressly approved by the
part responsible for compliance could void the user’s authority to operate the
equipment.

32 33