RuggedMCTM RMC20

Serial Media Converter (Copper to Fiber)

Features and Benefits

Ports Options
„.Protocol independent RS485, RS422, or RS232
(user selectable) conversion to multimode fiber optics
(ST connector only)
„.RS232 to RS485/422 conversion mode
„.Fully EIA/TIA RS485, RS422, RS232 compliant
communications
„.Built-in, defeatable, RS485/RS422 termination networks
„.Point-to-point, or optical loop configurations
„.Full or half duplex configurable
„.Support for high-speed serial baud rates from
300 to 115200 baud

Key Features
„.Protocol independent (use for Modbus, DeviceNET,
Profibus, DNP 3.0, proprietary, etc)
„.Extend lengths of serial connections (up to 5km/hop)
„.Media conversation is transparent to end devices
Product Summary
Universal Power Supply Options
„.24VDC, 48VDC or HI (88-300VDC / 85 - 264VAC) options
The RMC™ series of media converters are industrially
for worldwide operability
hardened and specifically designed to operate reliably in
„.Integrated high-reliability power supply eliminates the
electrically harsh and climatically demanding environments. need for external power transformer
„.Screw down terminal blocks ensure reliable maintenance-
The RMC20 is a utility-grade, protocol-independent, free connections
serial-to-fiber and serial standards converter for all your „.All power supplies CSA/UL 60950 approved for
serial communication requirements. The RMC20 allows +85°C (+185°F) operation
RS485, RS422, or RS232 devices or networks to
Designed for Harsh Environments
communicate over secure, noise immune, optically isolated,
„.Exceeds IEC 61850-3 and IEEE 1613 Standards for
fiber optic cabling at extended distances as well convert
communication equipment in electric power substations.
RS232 to either RS485 or RS422 serial standards. „.Operates over a temperature range of -40°C to +85°C
without the use of fans for improved reliability
The RMC20 was designed specifically to provide years of „.18 AWG galvanized steel enclosure suitable for DIN or
maintenance free operation for all your mission-critical, real- panel mounting provide secure mechanical reliability
time control applications. To ensure the utmost in reliability,
the RMC20 is tested to the most stringent international EMI Simple Plug and Play Operation
„.Simple, externally-accessible configuration
and environmental standards for use in HV/MV electric utility
„.Transmit and receive data LED indicators for quick
substations and industrial manufacturing, process and
and easy troubleshooting
control and intelligent transportation systems applications. All „.Fully integrated power supply connects directly
RMC™ products are packaged with a high reliability, built-in to power source permanently for reliable
power supply (24V, 48V, or HI Voltage options) and enclosed maintenance-free operation
in a rugged galvanized steel enclosure suitable for panel or
DIN-rail mounting.

All RuggedCom Inc. products are backed by a five-year

RUGGEDCOM
warranty and unsurpassed technical support. ISO 9001:2000
CERTIFIED

www.RuggedCom.com RuggedMCTM RMC20 1

 RuggedMCTM RMC20
Serial Media Converter (Copper to Fiber)

Typical Configurations
Serial point-to-point over fiber
The RMC20 can be used to replace transient-susceptible serial Multimode Fiber (<5km)
communication links with noise-immune multimode optical fiber
links. Using a pair of RMC20's, an RS485, RS422, or RS232 link
can be extended up to 5km, operating at a maximum of 150kbaud. RS232 RS485/422

The RMC20 also allows seamless integration of RS232, RS485 IED

IED
and RS422 devices. All communications are protocol independent IED

and media conversion is transparent to the end devices thus PC IED

simplifying design and configuration.

RS232 to RS485/422 Converter

The RMC20 can be used as an RS232 to RS485/422
RS232 RS485/422
converter, allowing for quick and simple serial conversion.
The RMC20 features a configurable RS485 turn-around timer for RS232 - RS485/422
IED
Conversion Mode

half duplex communications or RS422 compliant full duplex IED

PC
IED
communications. Differential RS485/422 terminals feature built-in, IED

defeatable, termination networks as specified by the Modbus

standard to simplify setup and installation.

Serial optical bus configuration RS232

The RMC20 in an optical bus configuration can replace entire PC

multi-drop RS485, RS422 or RS232 networks. In this topology, all Serial Optical BUS

messages travel through the optical ring and are echoed back to
the master. This topology allows for extended distance up to
5km/hop multi-drop networks that isolate and protect individual REPEAT=ON REPEAT=ON

IED's from electrical transients that can damage one more devices
RS485/422 RS485/422 RS485/422
on the network. All communications are protocol independent,
IED IED IED

and media conversion is transparent to the end devices thus IED IED IED

IED IED IED

simplifying design and configuration. IED IED IED

Connecting to an Ethernet LAN ETHERNET LAN

The RMC20 can be used in conjunction with the RuggedServer™ RS485

RS400 to bring entire multi-drop networks onto the Ethernet LAN.

This solution provides secure, accessible connectivity to entire Serial Optical BUS
RuggedServer: RS400

serial networks with electrically isolated communications to

guarantee years of reliable communications.
REPEAT=ON REPEAT=ON

Multimode Fiber Optical Cable RS485/422 RS485/422 RS485/422

RS232/485/422 Serial Cable IED IED IED
Intelligent Electronic Device
IED IED IED

IED IED IED

IED IED IED

www.RuggedCom.com RuggedMCTM RMC20 2

 RuggedMCTM RMC20
Serial Media Converter (Copper to Fiber)

EMI and Environmental Type Tests

IEC 61850-3 EMI TYPE TESTS
TEST Description Test Levels Severity Levels
Enclosure Contact +/- 8kV 4
IEC 61000-4-2 ESD
Enclosure Air +/- 15kV 4
IEC 61000-4-3 Radiated RFI Enclosure ports 20 V/m x
Signal ports +/- 4kV @ 2.5kHz x

D.C. Power ports +/- 4kV 4

IEC 61000-4-4 Burst (Fast Transient)
A.C. Power ports +/- 4kV 4

Earth ground ports 3 +/- 4kV 4

Signal ports +/- 4kV line-to-earth, +/- 2kV line-to-line 4
IEC 61000-4-5 Surge D.C. Power ports +/- 2kV line-to-earth, +/- 1kV line-to-line 3
A.C. Power ports +/- 4kV line-to-earth, +/- 2kV line-to-line 4
Signal ports 10V 3
D.C Power ports 10V 3
IEC 61000-4-6 Induced (Conducted) RFI
A.C. Power ports 10V 3

Earth ground ports 3 10V 3

IEC 61000-4-8 Magnetic Field Enclosure ports 40 A/m continuous, 1000 A/m for 1 s N/A
D.C. Power ports 30% for 0.1s, 60% for 0.1s, 100% for 0.05s N/A
IEC 61000-4-29
Voltage Dips & Interrupts 30% for 1 period, 60% for 50 periods N/A
A.C. Power ports
IEC 61000-4-11 100% for 5 periods, 100% for 50 periods 2 N/A
Signal ports 2.5kV common, 1kV diff. mode@1MHz 3
IEC 61000-4-12 Damped Oscillatory D.C. Power ports 2.5kV common, 1kV diff. mode@1MHz 3
A.C. Power ports 2.5kV common, 1kV diff. mode@1MHz 3
Signal ports 30V Continuous, 300V for 1s 4
IEC 61000-4-16 Mains Frequency Voltage
D.C. Power ports 30V Continuous, 300V for 1s 4
IEC 61000-4-17 Ripple on D.C. Power Supply D.C. Power ports 10% 3
Signal ports 2kVac (Fail-Safe Relay output) N/A
IEC 60255-5 Dielectric Strength D.C. Power ports 2kVac N/A
A.C. Power ports 2kVac N/A
Signal ports 5kV (Fail-Safe Relay output) N/A
IEC 60255-5 H.V. Impulse D.C. Power ports 5kV N/A
A.C. Power ports 5kV N/A

IEEE 1613 (C37.90.x) EMI IMMUNITY TYPE TESTS

Test Description Test Levels Severity Levels
Enclosure Contact +/- 8kV N/A
IEEE C37.90.3 ESD
Enclosure Air +/- 15kV N/A
IEEE C37.90.2 Radiated RFI Enclosure ports 35 V/m N/A
Signal ports +/- 4kV @ 2.5kHz N/A
D.C. Power ports +/- 4kV N/A
IEEE C37.90.1 Fast Transient
A.C. Power ports +/- 4kV N/A
Earth ground ports3 +/- 4kV N/A
Signal ports 2.5kV common mode @1MHz N/A
IEEE C37.90.1 Oscillatory D.C. Power ports 2.5kV common, 1kV diff. mode@1MHz N/A
A.C. Power ports 2.5kV common, 1kV diff. mode@1MHz N/A
Signal ports 5kV (Fail-Safe Relay output) N/A
IEEE C37.90 H.V. Impulse D.C. Power ports 5kV N/A
A.C. Power ports 5kV N/A
Signal ports 2kVac N/A
IEEE C37.90 Dielectric Strength D.C. Power ports 2kVac N/A
A.C. Power ports 2kVac N/A

Environmental Type Tests

Test Description Test Levels Severity Levels
IEC 60068-2-1 Cold Temperature Test Ad -40°C, 16 Hours N/A
IEC 60068-2-2 Dry Heat Test Bd +85°C, 16 Hours N/A
95% (non-condensing), 55°C , 6
IEC 60068-2-30 Humidity (Damp Heat, Cyclic) Test Db N/A
cycles
IEC 60255-21-1 Vibration Tests Fc 2g @ (10 - 150) Hz Class 2
IEC 60255-21-2 Shock Tests Ea 30g @ 11mS Class 2

Notes: 1. Only applicable to functional earth connections separated from the safety earth connection.
2. Class 2 refers to "Measuring relays and protection equipment for which a very high security margin is required or where the vibration levels are very high,
( e.g. shipboard application and for severe transportation conditions")

www.RuggedCom.com RuggedMCTM RMC20 3

 RuggedMCTM RMC20
Serial Media Converter (Copper to Fiber)

Technical Specifications
Power Supply EMI Immunity and Environmental Compliance
„.Power Consumption: 2W (max) „.IEC 61000-6-2 Industrial (Generic)
„.24VDC: 18-36VDC (max) „.IEC 61800-3 Industrial (Variable Speed Drive Systems)
„.48VDC: 36-59VDC (max) „.IEC 61850-3 Electric Utility Substations
„.HI Voltage AC/DC: 88-300VDC, 85-265VAC (max) „.IEEE 1613 Electric Utility Substations
„.NEMA TS 2 Traffic Control Equipment
Physical
„.Height: 4.3" Fiber Optical Specifications
„.Width: 2.4" „.TX Power: -13.5 dBm Avg
„.Depth: 3.3" „.RX Sensitivity: -28.5 dBm Avg
„.Weight: 1.5lbs (0.68kg) „.Optical Budget: 15 dB
„.Ingress Protection: IP40 (1mm objects) „.Maximum Link Distance: 5km
„.Enclosure: 18 AWG galvanized steel enclosure
„.Mounting: DIN rail or panel mounted
Approvals
„.ISO: Designed and manufactured using a ISO9001: 2000
Serial Communications certified quality program
„.Fully EIA/TIA RS485, RS422, and RS232 compliant „.CE Marking
„.RS485, RS4822, RS232 user selectable „.Emissions: FCC Part 15 (Class A),
„.Configurable RS485 turn-around time EN55022 (CISPR22 Class A)
„..300 - 115200 Baud rates supported „.Safety: cCSAus (Compliant with CSA C22.2 No. 60950,
„.Duplex selectable (Full or half) UL 60950, EN60950)
„.Termination network: Defeatable 120ohm AC termination „.Laser Eye Safety (FDA/CDRH): Complies with 21
as per MODBUS v1.0 CFR Chapter1, Subchapter J.

Warranty
„.5 Years-Applicable to design or manufacturing
related product defects.

Dimensions

www.RuggedCom.com RuggedMCTM RMC20 4

 RuggedMCTM RMC20
Serial Media Converter (Copper to Fiber)

Order Codes
RMC20 - __
PS

PS: (Power Supply)

„.24 = 24VDC (18-36VDC)
„.48 = 48VDC (36-59VDC)
„.HI = 88-300VDC or 85-264VAC

Mounting Options
„.DIN rail mounting is standard
„.For Panel mounting, order P/N 41-12-006

For additional information on our products and

services, please visit our website at:
www.ruggedcom.com

RuggedCom Inc.
30 Whitmore Road
Woodbridge, Ontario, Canada L4L 7Z4
Tel: (905) 856-5288 Fax: (905) 856-1995
Toll Free: (888) 264-0006
Technical Support Center: (866) 922-7975 or (954) 922-7975

© 2006 RuggedCom Inc.

RuggedMC is a trademark of RuggedCom Inc.
Ethernet is a trademark of the Xerox Corporation.
Modbus is a trademark of Schneider Electric
All brand marks, trademarks and company names used are
exclusively owned by their respective holders.
Patent Pending
All specifications in this document are subject to change without notice.

Rev 1-H

www.RuggedCom.com RuggedMCTM RMC20 5