Caustic Soda Solutions

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

TECHNICAL BULLETIN

19 Motivation Dve Wangara, WA, 6065 AUSTRALIA


T +61 8 9302 4000 | FREE 1800 999 196 | F +61 8 9302 5000

CAUSTIC SODA SOLUTIONS


LIQUID SODIUM HYDROXIDE

MATERIAL & FUNCTION


Liquid Caustic soda is a colorless, odorless liquid. It is usually produced as part of
the same process that creates chlorine. Used as a neutralizing agent, Caustic Soda
is an important component in the petroleum, pulp and paper and alumina
industries. Caustic soda is also used in a wide range of chemical processes

PRECAUTIONS:
This product is classified as a Dangerous Good for transport and storage purposes, and
is classified by worksafe as hazardous. Consult the material safety data sheet for
details. In general, protective clothing and eye protection are required. Sodium
hydroxide can produce severe burns to skin and permanent eye damage.

PROPERTIES
Appearance: a viscous, odorless, colorless liquid
Specific Gravity: 1.5
Typical Analytical Results: NaOH 48.4 %; Na2CO3 0.2 %; NaCl, 79 mg/kg: Hg
<0.005 mg/kg.

% of Solution 10% 25% 30% 33% 36% 50%

Boiling Point(°C): 103 112 117 118 123 142


Specific Gravity @ 20°C: 1.109 1.252 1.328 1.363 1.397 1.525
Freezing Point (°C): -12 -10 2 7 14 12

APPLICATION
Food Industry:
CIP cleaning of vats and tanks. Suitable for tank cleaning in the Dairy Industry. Use
approximately 125 mL in 100L. In all cases rinse thoroughly after use. Check final
rinsing with pH paper (pH <9). Allow tank to drain after rinsing.
General Cleaning
Industrial Cleaning of floors and machinery from foods and fat deposits. Use 0.1-4.0
% sodium hydroxide (200mL to 8L per 100 L of water). A detergent wash before
rinsing will assist in removal of residual alkali and soaps.
– drains. For unblocking grease traps and drains. Use 1L neat for normal household
drains (caution – heat, spitting and blowback may occur).

PACKAGING
15L, 20L plastic cube, 110 L Pl drum, 200L mauser, 1000L bulki

IMPORTANT NOTICE TO CUSTOMER

Since the use of this product is beyond the control of either seller or manufacturer, their only
obligation shall be to replace any quantity of product which is proven defective. They cannot assume
any risk or liability in excess of the purchase price of the product itself, which does not include labour
or any consequential damages resulting from the use of this product. Determining the suitability of
this product for any intended use shall be solely the responsibility of the user. ALWAYS TEST
FIRST.

You might also like