Tle 7 Agri Crop Production

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

Republic of the Philippines

Department of Education
REGION IX
SCHOOLS DIVISION OF ZAMBOANGA DEL SUR
LOCUBAN NATIONAL HIGH SCHOOL
TLE 7 – CROP PRODUCTION
Name: Score:
Grade & Section: No. of Items: 40
Set A
Direction. Carefully read and understand each question. Select the correct answer by shading
the letter of your choice. Don’t CHEAT! You are not allowed. Masuko si ma’am. Ayyy....

1. What tool does NOT belong to the group?


A. Ruler B. Weighing Scale C. Pruning shears D. Meterstick
2. Your father requested you to get 2 sacks of animal manure from the storage area. What tool
should you use to transport the sacks of manure?
A. Spade B. Shovel C. Wheel Barrow D. Pick mattock
3. Which tool resembles the appearance of a spoon and is used for transferring soil?
A. Grab hoe B. Shovel C. Spade D. Spading fork
4. Why do we need to conduct pre-operative check-up of tools, implement and equipment before
starting to work?
A. It is to repair defective tools.
B. It is to check if tools are serviceable.
C. It is to determine functionality of tools, implement and equipment.
D. It is to check, repair and determine the functionality of tools, implement and equipment.
5. What manual do we check before using the equipment?
A. subscriber’s manual C. equipment’s manual
B. farmer’s manual D. manufacturer’s manual
6. Why do farm tools, implements and equipment play an important role in crop production?
A. It makes work easier. C. It makes work faster.
B. It saves time and effort. D. All of the above
7. Which of the following is best used for applying insecticides?
A. Water pail B. Sprinkler C. Sprayer D. Pruning shears
8. Mang Jose’s rice field is now ready for harvest. He needs an equipment to harvest the rice grain
to save time and labor cost. What equipment is appropriate to use?
A. Rice seeder B. Corn dehusker C. Rice harvester D. Tractor
9. Which of the following are cutting tools?
A. Rake, wheel barrow, and knife C. Hand fork, grab hoe, shovel and axe
B. Pruning shear, sickle and bolo D. Wheel barrow, sickle, knife and bolo
10. Why is it important to check the tractor before using?
A. Prevent costly repair C. Cause damage to the equipment
B. Delay work schedule D. Add burden to the operator
11. What tool that is used for clearing the ground and clearing the topsoil?
A. Rake B. Light hoe C. Hand trowel D. Hand cultivator
12. What equipment is used to trim grass?
A. Water pump B. Grass cutter C. Tractor D. Mechanical grain drier
13.Which of the following is an example of an implement?
A. Rice seeder B. Tractor C. Rotavator D. Combined harvester
14. Which of the following is pulled by working animals or mounted to machine?
A. Farm Implement B. Equipment C. Hand tool D. Machine
15. What implement is used for tilling and pulverizing soil?
A. Plow B. Harrow C. Hand tractor D. Four wheel tractor
16. Which farm tool used for harvesting grains?
A. axe  B. bolo  C. knife  D. sickle
17. Pepito’s father asked him to get the spade and help him on what he’s doing. What is the activity
of Pepito’s father?
A. cultivating the soil  B. cleaning the ground
C. digging canal  D. transplanting
18. Mang Kanor will prepare his half hectare vegetable farm. What farm equipment will he used to
pull his plow?
A. four wheel jeep  B. thresher  C. rotavator  D. four wheel tractor
19. What tool does NOT belong to the group?
A. Crowbar  B. Mattock  C. Harrow  D. Shovel
20. Common farm equipment must be used carefully; therefore, an operator should be _____.
A. college graduate  B. highly skilled  C. not skilled  D. valedictorian
21. Which of the following functions is the work of light hoe?
A. used for loosening and leveling soil and digging out furrows for planting
B. used for cutting tall grasses and weeds and chopping branches of trees
C. used for breaking hard topsoil and pulverizing soil
D. for hauling water, manure and fertilizers
22. For all the tools and materials which are already worn out, what is the best thing to do?
A. fix it B. keep it on the garage
C. sell it on the junk shop  D. use it again
23. Which of the following purposes is the function of hand fork?
A. for hauling water, manure and fertilizers
B. used for inter row cultivation
C. used for loosening and leveling soil and digging out furrows for planting
D. used for cutting tall grasses and weeds and chopping branches of trees
24. Which tool is used for hauling water, manure and fertilizers?
A. drum  B. pail  C. sprinkler  D. wheel barrow
25. What is the purpose of shovel?
A. used in removing trash, digging loose soil, moving soil from one place to another and for
mixing soil
B. used for removing trash or soil, digging canals or ditches and mixing soil
C. used for breaking hard topsoil and pulverizing soil
D. used for digging canals, breaking hard topsoil and for digging up stones and tree stumps
26. In meeting the farm owner, you must gather data of the farm except______________.
A. Land area B. Crops to plant C. Date of harvesting D. None of these
27. In determining the estimation of farm inputs, which of the following should be
considered?
I. Farm supplies II. Labor requirements III. Crop growth
A. I and III B. II and III C. I and II D. None of these
28.Which does not belong to the group?
A. Land area B. Revision and allocation of budget
C. Sources of water for irrigation D. None of these
29. How can we find the amount needed in the farm operation?
A. In meeting the farm owner
B. In calculating the farm inputs
C. In determining the owner’s plan to his farm
D. None of these
30. What is the last part in the procedures in reporting?
A. Give the final draft of farm estimates and calculation to the owner
B. Calculate the farm inputs
C. Determine the owner’s plan to his farm.
D. None of these
31. These are resources that are used in crop production. What are these?
A. Farm outputs B. Farm inputs C. Harvested crops D. None of these
32. It supplies nutrient to the soil that are essential for the growth of a plant. What is it?
A. Seeds B. Fertilizer C. Pesticides D. None of these
33. What is a substance that is specifically used to kill pests?
A. Pesticides B. Insecticides C. Fungicide D. None of these
34. Which one of the following does not belong to labor requirements in plant care?
A. Marketing B. Applying fertilizer C. Plowing D. None of these
35. What do you think will be the benefits of a farmer who knows how to estimate and calculate
farm inputs in the operation of his farm?
A. It will help the farmer to secure the budget that are needed in the whole operation of his
farm.
B. It will help to lessen his yield.
C. It will maximize his capacity to perform farm tasks.
D. None of these
36. John needs 200kls of seeds to be planted in his field. The seed price per kilo is P23.00.
How much money does he need to purchase the seeds?
A. P 6,400.00 B. P4,600.00 C. P 4,000.00 D. P 6,000
37. John has only P2,400.00 budget to purchase fertilizer. The price of fertilizer is P 30.00
per kilo. How many kilos of fertilizer will be purchased?
A. 75 B. 85 C. 80 D. 70
38. John hire 3 workers to weed his farm for 5 days. They agreed for P 280.00/day. How
much money he will pay to those workers for 3 days?
A. P4,200.00 B. P4,500.00 C. P4,400.00 D. P4,700.00
39. John will purchase pesticide for his 2-hectare farm. Each pesticide per hectare costs
P330.00. How much money does he needs to purchase it?
A. P690.00 B. P680.00 C. P660.00 D. P650.00
40. John hire 2 workers to apply pesticide in his farm. They agreed for P 350.00/day.
How much money he will pay to those workers?
A. P650.00 B. P750.00 C. P700.00 D. P800.00

Matching Type. Match Column A with Column B. Write only the letter of your answer in your activity
notebook.
A B
1. It is also called close row or wide row planting, A. Vertical growing
this method increases yields significantly over a B. Crop rotation
traditional row style garden. C. Single row arrangement
2. There are gardens designed for people having D. Direct seeding
little to no traditional garden space. E. Monocrop
3. It is a system of growing crops in blocks F. Square foot
or strips of 2 or more rows. G. Spatial arrangement
4. It is the systematic apportioning of the farm H. Relay cropping
area or any growing surface for crop production. I. Intercropping
5. This is generally set up in grids of 4 x 4 squares J. Block style garden
with strings or wood attached to the frame to divide the K. Multiple row planting
bed into equal square-foot sections
6. Planting in single rows
7. A method of planting in which seeds are directly
planted on the ground.
8. Practice of growing a series of different
types of crops in the same area
9. Growing single crop year after year in
the same land
10. Common practice of maximizing the use
of interrow spaces
What I Know
Pre-Assessment
Choose the letter of the best answer. Write the chosen letter on your answer sheet.
1. Why do farm tools consider very important in agricultural crop production?
a. They make work easier. c. They make work faster.b. They save time and effort. d. All of the above.

2. Which of the following is an example of digging tool?


a. Pruning shear b. Bolo c. Crowbar d. Grub Hoe

3. Which of the following is the correct storing of tools?


a. store in a wet place c. store near the playgroundb. store in a clean and dry area d. leave it in the garden

4. Which among the tools resembles the appearance of spoon and use for transferring soil?
a. Shovel b. Spading fork c. Spade d. Grub hoe

5. Which tool is used for spraying insecticides, foliar fertilizers, fungicides and herbicides?
a. Pail b. Dipper c. Sprinkler d. Sprayer

6. Which of the following is the importance of storing tools and equipment?


a. Improves appearance of working areas c. It improves one selfb. Improves the community d. It improves y
our tools

7. Which of the following should you properly store tools?


a. in a jar b. in their original cases c. in a pail d. in the garden

8. Which of the following tools is used for inter row cultivation?


a. Hand fork b. Pruning shear c. Spading fork d. Rake

9. Which of the following is used for cutting bigger size post?


a. Knife b. Axe c. Pruning shear d. Hand cultivator

10. Why is it important to put oil to your tools and equipment?


a. to prevent from rusting c. to make it shinyb. to make it sharp d. to make it dull

11. Which of the following should you store your tools?


a. in a jar b. in their original cases c. in a pail d. in the garden

12. Which of the following is used for cutting bigger size post?
a. Knife b. Axe c. Pruning shear d. Hand cultivator

13. Which of the following is the importance of storing your tools and equipment?
a. Improves appearance of working areas c. It improves one selfb. Improves the community d. Improve your 
tools

14. Why is it important to put oil to your tools and equipment?


a. to prevent from rusting c. to make it shinyb. to make it sharp d. to make it dull

15. Which of the following tools is used for inter row cultivation?
a. Hand fork b. Pruning shear c. Spading fork d. Rake

You might also like