Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Flow Chart For EE Room Entry

    Uploaded by

    Jose Mari Barroga
    This flow chart outlines the process for obtaining an EE/Aux/POS entry and work permit. It shows that a permit is not needed for non-electrical work but is required for any electrical work, especially working in an energized panel board. The chart illustrates checking that panel boards are locked before beginning work and contacting MDBI MEPFS after work is completed to verify the door was closed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Flow Chart For EE Room Entry

    Uploaded by

    Jose Mari Barroga
    29 views1 page
    This flow chart outlines the process for obtaining an EE/Aux/POS entry and work permit. It shows that a permit is not needed for non-electrical work but is required for any electrical work, especially working in an energized panel board. The chart illustrates checking that panel boards are locked before beginning work and contacting MDBI MEPFS after work is completed to verify the door was closed.

    Original Title

    Flow Chart for EE Room Entry

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This flow chart outlines the process for obtaining an EE/Aux/POS entry and work permit. It shows that a permit is not needed for non-electrical work but is required for any electrical work, especially working in an energized panel board. The chart illustrates checking that panel boards are locked before beginning work and contacting MDBI MEPFS after work is completed to verify the door was closed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    29 views1 page

    Flow Chart For EE Room Entry

    Uploaded by

    Jose Mari Barroga
    This flow chart outlines the process for obtaining an EE/Aux/POS entry and work permit. It shows that a permit is not needed for non-electrical work but is required for any electrical work, especially working in an energized panel board. The chart illustrates checking that panel boards are locked before beginning work and contacting MDBI MEPFS after work is completed to verify the door was closed.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    APPLICATION FOR EE/AUX/POS ENTRY & WORK PERMIT FLOW CHART

    Note:
    KEYS OF ROOMS: MDBI
    EE/Aux/POS Room KEYS OF PANEL BOARD : VECC

    NOT ENERGIZED ROOM ENERGIZED ROOM

    Not Electrical Works (Archi Electrical Works, Not into Working Under Enegized
    No need permit. Energized Panel Board
    Works) Panel Board
    Request for Shutdown

    EE/Aux/POS Entry & Work EE/Aux/POS Entry & Work


    Permit Permit YES
    YES Need Power Shut
    YES
    Down

    NO
    Voltage to Lock the Voltage to Lock the
    Panel Board Panel Board EE/Aux/POS Entry & Work Permit

    STOP STOP

    ENERGIZED PANEL
    NO NO
    PANEL BOARDS ARE BOARDS ARE
    LOCKED LOCKED

    YES
    YES

    BEGIN BEGIN Check the activity to


    work with inside the
    Work Scope Work Scope
    Panel Board. Check the
    list of tools & the NO
    certificate/qualification
    END OF WORK
    END OF WORK of worker. STOP
    Contact MDBI MEPFS to verify Contact MDBI MEPFS to verify
    that the door was closed that the door was closed
    YES

    BEGIN
    Request for Energization
    Work Scope

    END OF WORK

    Contact MDBI MEPFS to verify


    that the door was closed

    You might also like