O P E R AT I O N S M A N U A L BASIC MODEL ADVANCED MODEL
1 1
2 2 7
3 3 8
4 6 4 5 5
SurfLink® Remote allows for easy and discreet
adjustments to your hearing instruments. 1. Ear Selection Switch Advanced Model Only
2. Volume Up 6. Mute/Unmute With its long-life battery, your SurfLink Remote 7. Memory Change 3. Volume Down is always on and ready to work with your 4. Home 8. Favorite hearing instruments. 5. Lock/Unlock 2 3 Left Both Right
Volume Up/Down Ear Selection Switch Each time you activate a Volume button, the The Ear Selection Switch controls whether overall level of all sounds coming through your adjustments are made to a single hearing hearing instrument changes in the requested instrument or both hearing instruments. direction (either up or down).
To adjust both hearing instruments at the
same time, the Ear Selection Switch should be positioned in the center. To adjust a single hearing instrument, place the Ear Selection Switch to the Left or Right position indicating Home the hearing instrument to be changed. To reset your hearing instruments to memory one and the powered-on volume level, press the Home button.
Locked Unlocked
LED Lock/Unlock The blue LED blinks when a command is sent To make adjustments to your hearing to the left hearing instrument. Similarly, the red instruments, the SurfLink Remote should be in LED blinks for the right hearing instrument. the Unlock state. When not using your SurfLink Remote, you can Lock it to prevent inadvertent hearing instrument changes. 4 5 ADVANCED MODEL ONLY ADVANCED MODEL ONLY
Favorite Mute/Unmute Your hearing instruments have the following Favorite button configuration: To temporarily turn off all sounds presented in the hearing instruments, press the Mute/Unmute None – Pressing this button has no effect button. To unmute the hearing instruments, on hearing instruments. press the button again. Stop/Start Audio Stream – Pressing this button NOTE: When the hearing instruments are muted, selecting any button will unmute the hearing instruments as well as starts (or stops) audio streaming from SurfLink perform the function of the button selected. Media. Noise Control Boost – Pressing this button reduces noise while optimizing sound quality in noisy environments. Press button again to Memory Change deactivate this feature.
Your hearing professional may create multiple Jump to Memory 4 – Pressing this button memories within your hearing instrument. moves the hearing instrument to memory These additional memories can be accessed by four. pressing the Memory Change button, which will Tinnitus Stimulus On/Off — Pressing this cycle through the available memories. button starts (or stops) playing a tinnitus stimulus through your hearing instruments. NOTE: S ome of these features may not be available in all hearing instruments.
6 7 Lanyard (optional) Regulatory Notices 1. Insert thin cord into end of SurfLink Remote Required Information housing until loop is exposed. Waste from electronic equipment must be handled according to local regulations. 2. Thread lanyard through loop and pull lanyard. Instructions for Disposal of Old Electronics Lanyards can be obtained from your hearing Paradigm encourages, and your local community laws may professional (ask for part #90974-000). require, that your SurfLink Remote be disposed of via your local electronics recycling/disposal process. The below instructions are provided for the benefit of disposal/recycling personnel. Please include this manual with your device when disposing of your SurfLink Remote.
For Disposal/Recycling Personnel Only
This product contains a Lithium Ion Polymer battery. To remove this battery: • Pry apart the housing halves with a small screwdriver. • Unplug the battery connector from the circuit board 1 2 to prevent accidental shorting. • Pry the battery away from the housing using a wide flat blade.
Intended Use The SurfLink Remote is an accessory to a wireless air conduction hearing instrument. It is intended to let a user remotely make volume and program adjustments to an air conduction hearing instrument.
8 9 SurfLink Remote is classified as a Type B applied part under the IEC 60601-1 medical instrument standard. FCC/IC Information SurfLink Remote is designed to comply with the most FCC ID: EOA-WR stringent Standards of International Electromagnetic IC: 6903A-WR (Model 100) Compatibility. However, it is still possible that you may experience interference caused by power line disturbances, FCC/IC Notice airport metal detectors, electromagnetic fields from other This device complies with part 15 of the FCC rules medical devices, radio signals and electrostatic discharges. and with RSS-210. Operation is subject to the following If you use other medical devices or wear implantable two conditions: (1) this device may not cause harmful medical devices such as defibrillators or pacemakers and interference, and (2) this device must accept any are concerned that your SurfLink Remote might cause interference received, including interference that interference with your medical device, please contact your may cause undesired operation of the device. physician or the manufacturer of your medical device for NOTE: The manufacturer is not responsible for any radio information about the risk of disturbance. or TV interference caused by unauthorized modifications SurfLink Remote should not be used during an to this equipment. Such modifications could void the user’s MRI procedure. authority to operate the equipment.
Use on Aircrafts Note FCC/IC
SurfLink Remote should not be used on aircrafts Cet appareil est conforme avec la partie15 des règles unless specifically permitted by the flight personnel. de la FCC et du RSS-210. L’utilisation est assujettie à deux conditions: (1) Cet appareil ne doit pas causer International Use d’interférence nuisible et (2) ce dispositif doit accepter SurfLink Remote is approved to operate at a radio l’interférence reçue incluant l’interférence qui pourrait frequency that is specific to your country or region and causer des opérations indésirables pour l’appareil. might not be approved for use outside your country or NOTE: Le manufacturier n’est pas responsable de region. Be aware that operation during international travel l’interférence créée par la modification de cet équipement may cause interference with other electronic devices, or lors de l’écoute du téléviseur ou de la radio. De telles other electronic devices may cause interference with your modifications pourraient entrainer la révocation de l’autorité SurfLink Remote. de l’utilisateur à opérer cet équipement. The battery in your SurfLink Remote is not replaceable. Do not attempt to replace the battery.
10 11 The European version of Surflink Remote operates in the Notes 863-865 MHz band with a maximum effective radiated power of -10 dBm.
Hereby, Paradigm declares that the SurfLink Remote is
in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be obtained from the addresses below. Paradigm, Inc. 6600 Washington Ave. South Eden Prairie, MN 55344 USA
Paradigm, Inc. European Headquarters
Wm. F. Austin House, Bramhall Technology Park Pepper Road, Hazel Grove, Stockport SK7 5BX United Kingdom
