Std11 Maths EM 1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 271

MATHEMATICS

HIGHER SECONDARY FIRST YEAR


TAMILNADU
TEXTBOOK CORPORATION
COLLEGE ROAD, CHENNAI - 600 006
Untouchability is a sin
Untouchability is a crime
Untouchability is inhuman
VOLUME I VOLUME I VOLUME I VOLUME I VOLUME I
REVISED BASED ON THE RECOMMENDATIONS OF THE
TEXT BOOK DEVELOPMENT COMMITTEE

PREFACE
This book is designed in accordance with the new guidelines and
syllabi 2003 of the Higher Secondary Mathematics First Year,
Government of Tamilnadu. In the era of knowledge explosion, writing a
text book on Mathematics is challenging and promising. Mathematics
being one of the most important subjects which not only decides the
career of many young students but also enhances their ability of
analytical and rational thinking and forms a base for Science and
Technology.
This book would be of considerable value to the students who
would need some additional practice in the concepts taught in the class
and the students who aspire for some extra challenge as well.
Each chapter opens with an introduction, various definitions,
theorems and results. These in turn are followed by solved examples
and exercises which have been classified in various types for quick and
effective revision. The most important feature of this book is the
inclusion of a new chapter namely Functions and Graphs. In this
chapter many of the abstract concepts have been clearly explained
through concrete examples and diagrams.
It is hoped that this book will be an acceptable companion to the
teacher and the taught. This book contains more than 500 examples
and 1000 exercise problems. It is quite difficult to expect the teacher to
do everything. The students are advised to learn by themselves the
remaining problems left by the teacher. Since the Plus 1 level is
considered as the foundation course for higher mathematics, the
students must give more attention to each and every result mentioned in
this book.


The chief features of this book are
(i) The subject matter has been presented in a simple and lucid
manner so that the students themselves are able to
understand the solutions to the solved examples.
(ii) Special efforts have been made to give the proof of some
standard theorems.
(iii) The working rules have been given so that the students
themselves try the solution to the problems given in the
exercise.
(iv) Sketches of the curves have been drawn wherever
necessary, facilitating the learner for better understanding of
concepts.
(v) The problems have been carefully selected and well graded.
The list of reference books provided at the end of this book will be
of much helpful for further enrichment of various concepts introduced.
We welcome suggestions and constructive criticisms from learned
teachers and dear students as there is always hope for further
improvement.
K. SRINIVASAN
Chairperson
Writing Team


SYLLABUS
(1) MATRICES AND DETERMINANTS : Matrix Algebra Definitions, types,
operations, algebraic properties. Determinants Definitions, properties,
evaluation, factor method, product of determinants, co-factor
determinants. (18 periods)
(2) VECTOR ALGEBRA : Definitions, types, addition, subtraction, scalar
multiplication, properties, position vector, resolution of a vector in two and
three dimensions, direction cosines and direction ratios. (15 periods)
(3) ALGEBRA : Partial Fractions Definitions, linear factors, none of which
is repeated, some of which are repeated, quadratic factors (none of
which is repeated). Permutations Principles of counting, concept,
permutation of objects not all distinct, permutation when objects can
repeat, circular permutations. Combinations, Mathematical induction,
Binomial theorem for positive integral indexfinding middle and
particular terms. (25 periods)
(4) SEQUENCE AND SERIES : Definitions, special types of sequences and
series, harmonic progression, arithmetic mean, geometric mean,
harmonic mean. Binomial theorem for rational number other than
positive integer, Binomial series, approximation, summation of Binomial
series, Exponential series, Logarithmic series (simple problems)
(15 periods)
(5) ANALYTICAL GEOMETRY : Locus, straight lines normal form,
parametric form, general form, perpendicular distance from a point,
family of straight lines, angle between two straight lines, pair of
straight lines. Circle general equation, parametric form, tangent
equation, length of the tangent, condition for tangent. Equation of chord
of contact of tangents from a point, family of circles concetric circles,
orthogonal circles. (23 periods)

(6) TRIGONOMETRY : Trigonometrical ratios and identities, signs of
T-ratios, compound angles A B, multiple angles 2A, 3A, sub multiple
(half) angle A/2, transformation of a product into a sum or difference,
conditional identities, trigonometrical equations, properties of
triangles, solution of triangles (SSS, SAA and SAS types only),
inverse trigonometrical functions. (25 periods)
(7) FUNCTIONS AND GRAPHS : Constants, variables, intervals,
neighbourhood of a point, Cartesian product, relation. Function graph
of a function, vertical line test. Types of functions Onto, one-to-one,
identity, inverse, composition of functions, sum, difference product,
quotient of two functions, constant function, linear function, polynomial
function, rational function, exponential function, reciprocal function,
absolute value function, greatest integer function, least integer function,
signum function, odd and even functions, trigonometrical functions,
quadratic functions. Quadratic inequation Domain and range.
(15 periods)
(8) DIFFERENTIAL CALCULUS : Limit of a function Concept, fundamental
results, important limits, Continuity of a function at a point, in an
interval, discontinuous function. Concept of Differentiation
derivatives, slope, relation between continuity and differentiation.
Differentiation techniques first principle, standard formulae, product
rule, quotient rule, chain rule, inverse functions, method of substitution,
parametric functions, implicit function, third order derivatives.
(30 periods)
(9) INTEGRAL CALCULUS : Concept, integral as anti-derivative, integration of
linear functions, properties of integrals. Methods of integration
decomposition method, substitution method, integration by parts.
Definite integrals integration as summation, simple problems.
(32 periods)
(10) PROBABILITY : Classical definitions, axioms, basic theorems, conditional
probability, total probability of an event, Bayes theorem (statement only),
simple problems. (12 periods)


CONTENTS
Page No.
Preface
Syllabus
1. Matrices and Determinants 1
1.1 Matrix Algebra 1
1.2 Determinants 14
2. Vector Algebra 39
2.1 Introduction 39
2.2 Types of Vectors 41
2.3 Operations on Vectors 42
2.4 Position Vector 47
2.5 Resolution of a Vector 58
2.6 Direction Cosines and Direction Ratios 62
3. Algebra 69
3.1 Partial Fractions 69
3.2 Permutations 74
3.3 Combinations 89
3.4 Mathematical Induction 98
3.5 Binomial Theorem 105
4. Sequence and Series 114
4.1 Introduction 114
4.2 Sequence 115
4.3 Series 117
4.4 Some Special Types of Sequences and their Series 119
4.5 Means of Progressions 121
4.6 Some special types of Series 126

5. Analytical Geometry 133
5.1 Locus 133
5.2 Straight Lines 135
5.3 Family of Straight Lines 143
5.4 Pair of Straight Lines 154
5.5 Circle 160
5.6 Tangent 167
5.7 Family of Circles 174
6. Trigonometry 179
6.1 Introduction 179
6.2 Trigonometrical Ratios and Identities 182
6.3 Compound Angles 197
6.4 Trigonometrical Equations 215
6.5 Properties of Triangles 224
6.6 Solutions of Triangles 232
6.7 Inverse Trigonometrical functions 235
Objective type Questions 243
Answers 255


1
1. MATRICES AND DETERMINANTS
1.1 Matrix Algebra
1.1.1 Introduction
The term matrix was first introduced by Sylvester in 1850. He defined a
matrix to be an arrangement of terms. In 1858 Cayley outlined a matrix algebra
defining addition, multiplication, scalar multiplication and inverses. Knowledge
of matrix is very useful and important as it has a wider application in almost
every field of Mathematics. Economists are using matrices for social
accounting, input output tables and in the study of inter-industry economics.
Matrices are also used in the study of communication theory, network analysis
in electrical engineering.
For example let us consider the marks scored by a student in different
subjects and in different terminal examinations. They are exhibited in a tabular
form as given below.
Tamil English Maths Science Social Science
Test 1 70 81 88 83 64
Test 2 68 76 93 81 70
Test 3 80 86 100 98 78
The above statement of marks can also be re-recorded as follows :
First row
Second row
Third row

(
(
70 81 88 83 64
68 76 93 81 70
80 86 100 98 78

First second Third Fourth Fifth
Column Column Column Column Column
This representation gives the following informations.
(i) The elements along the first, second, and third rows represent the test
marks of the different subjects.
(ii) The elements along the first, second, third, fourth and fifth columns
represent the subject marks in the different tests.
The purpose of matrices is to provide a kind of mathematical shorthand to
help the study of problems represented by the entries. The matrices may
represent transformations of co-ordinate spaces or systems of simultaneous
linear equations.
2
1.1.2 Definitions:
A matrix is a rectangular array or arrangement of entries or elements
displayed in rows and columns put within a square bracket or parenthesis. The
entries or elements may be any kind of numbers (real or complex), polynomials
or other expressions. Matrices are denoted by the capital letters like A, B, C
Here are some examples of Matrices.
A =

(
(
(
1 4
2 5
3 6

First Second
Column Column
First Row
Second Row
Third Row
B =

(
(
(
1 4 2
6 9 4
3 2 6

First Second Third
Column Column Column
C
1
C
2
C
3

First row (R
1
)
Second row (R
2
)
Third row (R
3
)
Note : In a matrix, rows are counted from top to bottom and the columns are
counted from left to right.
i.e. (i) The horizontal arrangements are known as rows.
(ii) The vertical arrangements are known as columns.
To identify an entry or an element of a matrix two suffixes are used. The
first suffix denotes the row and the second suffix denotes the column in which
the element occurs.
From the above example the elements of A are a
11
= 1, a
12
= 4, a
21
= 2,
a
22
= 5, a
31
= 3 and a
32
= 6
Order or size of a matrix
The order or size of a matrix is the number of rows and the number of
columns that are present in a matrix.
In the above examples order of A is 3 2, (to be read as 3-by-2) and order
of B is 3 3, (to be read as 3-by-3).
In general a matrix A of order m n can be represented as follows :



A =

(
(
(
a
11
a
12
a
1j
a
1n


a
i1
a
i2
a
ij
a
in

a
m1
a
m2
a
mj
a
mn

j
th

column



i
th
row
3
This can be symbolically written as A = [a
ij
]
m n
.
The element a
ij
belongs to i
th
row and the j
th
column. i being the row index
and j being the column index. The above matrix A is an m n or m-by-n matrix.
The expression m n is the order or size or dimension of the matrix.
Example 1.1: Construct a 3 2 matrix whose entries are given by a
ij
= i 2j
Solution: The general 3 2 matrix is of the form
A = [a
ij
] =

(
(
(
a
11
a
12
a
21
a
22
a
31
a
32
where i = 1, 2, 3 (rows), j = 1, 2 (columns)
It is given that a
ij
= i 2j
a
11
= 1 2 = 1 a
12
= 1 4 = 3
a
21
= 2 2 = 0 a
22
= 2 4 = 2
a
31
= 3 2 = 1 a
32
= 3 4 = 1
The required matrix is A =

(
(
(
1 3
0 2
1 1

1.1.3 Types of matrices
(1) Row matrix: A matrix having only one row is called a row matrix or a row
vector.
Examples (i) A = [a
ij
]
1 3
= [1 7 4] is a row matrix of order 1 3.
(ii) B = [b
ij
]
1 2
= [5 8] is a row matrix of order 1 2
(iii) C = [c
ij
]
1 1
= [100] is a row matrix of order 1 1
(2) Column matrix:
A matrix having only one column is called a column matrix or a column
vector.
Examples (i) A = [a
ij
]
3 1
=

(
(
(
1
7
4
is a column matrix of order 3 1
(ii) B = [b
ij
]
2 1
=

(
(
25
30
is a column matrix of order 2 1
(iii) C = [c
ij
]
1 1
= [68] is a column matrix of order 1 1
Note : Any matrix of order 1 1 can be treated as either a row matrix or a
column matrix.
4
(3) Square matrix
A square matrix is a matrix in which the number of rows and the number of
columns are equal. A matrix of order n n is also known as a square matrix of
order n.
In a square matrix A of order n n, the elements a
11
, a
22
, a
33
a
nn
are
called principal diagonal or leading diagonal or main diagonal elements.
A = [a
ij
]
2 2
=

(
(
2 4
6 8
is a square matrix of order 2
B = [b
ij
]
3 3
=

(
(
(
1 2 3
4 5 6
7 8 9
is a square matrix of order 3.
Note: In general the number of elements in a square matrix of order n is n
2
. We
can easily verify this statement from the above two examples.
(4) Diagonal Matrix:
A square matrix A = [a
ij
]
n n
is said to be a diagonal matrix if a
ij
= 0 when
i j
In a diagonal matrix all the entries except the entries along the main
diagonal are zero.
For example A = [a
ij
]
3 3
=

(
(
(
4 0 0
0 5 0
0 0 6
is a diagonal matrix.
(5) Triangular matrix: A square matrix in which all the entries above the
main diagonal are zero is called a lower triangular matrix. If all the entries
below the main diagonal are zero, it is called an upper triangular matrix.
A =

(
(
(
3 2 7
0 5 3
0 0 1
is an upper triangular matrix and B =

(
(
(
2 0 0
4 1 0
8 5 7
is a lower
triangular matrix.
(6) Scalar matrix:
A square matrix A = [a
ij
]
n n
is said to be scalar matrix if
a
ij
=

a if i = j
0 if i j

5
i.e. A scalar matrix is a diagonal matrix in which all the entries along the
main diagonal are equal.
A = [a
ij
]
2 2
=

(
(
5 0
0 5
B = [b
ij
]
3 3
=

(
(
(
5 0 0
0 5 0
0 0 5
are examples
for scalar matrices.
(7) Identity matrix or unit matrix:
A square matrix A = [a
ij
]
n n
is said to be an identity matrix if
a
ij
=

1 if i = j
0 if i j

i.e. An identity matrix or a unit matrix is a scalar matrix in which entries
along the main diagonal are equal to 1. We represent the identity matrix of
order n as I
n

I
2
=

(
(
1 0
0 1
, I
3
=

(
(
(
1 0 0
0 1 0
0 0 1
are identity matrices.
(8) Zero matrix or null matrix or void matrix
A matrix A = [a
ij
]
m n
is said to be a zero matrix or null matrix if all the
entries are zero, and is denoted by O i.e. a
ij
= 0 for all the values of i, j
[0 0],

(
(
(
0 0
0 0
0 0
,

(
(
(
0 0 0
0 0 0
0 0 0


are examples of zero matrices.
(9) Equality of Matrices:
Two matrices A and B are said to be equal if
(i) both the matrices A and B are of the same order or size.
(ii) the corresponding entries in both the matrices A and B are equal.
i.e. the matrices A = [a
ij
]
m n
and B = [b
ij
]
p q
are equal if m = p, n = q
and a
ij
= b
ij
for every i and j.
Example 1.2 :
If

(
x y
z w
=

(
4 3
1 5
then find the values of x, y, z, w.
Solution:
Since the two matrices are equal, their corresponding entries are also equal.
x = 4 y = 3 z = 1 w = 5
6
(10) Transpose of a matrix:
The matrix obtained from the given matrix A by interchanging its rows
into columns and its columns into rows is called the transpose of A and it is
denoted by A or A
T
.
If A =

(
(
(
4 3
2 0
1 5
then A
T
=

(
4 2 1
3 0 5

Note that if A is of order m n then A
T
is order n m.
(11) Multiplication of a matrix by a scalar
Let A be any matrix. Let k be any non-zero scalar. The matrix kA is
obtained by multiplying all the entries of matrix A by the non zero scalar k.
i.e. A = [a
ij
]
m n
kA = [ka
ij
]
m n

This is called scalar multiplication of a matrix.
Note: If a matrix A is of order m n then the matrix kA is also of the same
order m n
For example If A =

(
1 7 2
6 3 9
then 2A = 2

(
1 7 2
6 3 9
=

(
2 14 4
12 6 18

(12) Negative of a matrix:
Let A be any matrix. The negative of a matrix A is A and is obtained by
changing the sign of all the entries of matrix A.
i.e. A = [a
ij
]
m n
A = [ a
ij
]
m n

Let A =

(
(
cos sin
sin cos
then A =

(
(
cos sin
sin cos

1.1.4 Operations on matrices
(1) Addition and subtraction
Two matrices A and B can be added provided both the matrices are of the
same order and their sum A + B is obtained by adding the corresponding entries
of both the matrices A and B
i.e. A = [a
ij
]
m n
and B = [b
ij
]
m n
then A + B = [a
ij
+ b
ij
]
m n

Similarly A B = A + ( B) = [a
ij
]
m n
+ [ b
ij
]
m n

= [a
ij
b
ij
]
m n

Note:
(1) The matrices A + B and A B have same order equal to the order of
A or B.
7
(2) Subtraction is treated as negative addition.
(3) The additive inverse of matrix A is A.
i.e. A + ( A) = ( A) + A = O = zero matrix
For example, if A =

(
(
(
7 2
8 6
9 6
and B =

(
(
(
4 7
3 1
8 5

then A + B =

(
(
(
7 2
8 6
9 6
+

(
(
(
4 7
3 1
8 5
=

(
(
(
7 + 4 2 7
8 + 3 6 + 1
9 8 6 + 5
=

(
(
(
11 5
11 7
1 1
and
A B = A + ( B) =

(
(
(
7 2
8 6
9 6
+

(
(
(
4 7
3 1
8 5
=

(
(
(
7 4 2 + 7
8 3 6 1
9 + 8 6 5
=

(
(
(
3 9
5 5
17 11

(2) Matrix multiplication:
Two matrices A and B are said to be conformable for multiplication if the
number of columns of the first matrix A is equal to the number of rows of the
second matrix B. The product matrix AB is acquired by multiplying every row
of matrix A with the corresponding elements of every column of matrix B
element-wise and add the results. This procedure is known as row-by-column
multiplication rule.
Let A be a matrix of order m n and B be a matrix of order n p then the
product matrix AB will be of order m p
i.e. order of A is m n, order of B is n p
Then the order of AB is m p =
\
|
.
|
number of rows
of matrix A

\
|
.
|
number of columns
of matrix B

The following example describes the method of obtaining the product
matrix AB
Let A =

(
2 1 4
7 3 6

2 3
B =

(
(
(
6 4 3
3 2 5
7 3 1

3 3

It is to be noted that the number of columns of the first matrix A is equal to
the number of rows of the second matrix B.
8
Matrices A and B are conformable, i.e. the product matrix AB can be
found.
AB =

(
2 1 4
7 3 6

(
(
(
6 4 3
3 2 5
7 3 1

(
(
(
2 1 4 6
3
7

2 1 4 4
2
3

2 1 4 3
5
1

7 3 6 6
3
7

7 3 6 4
2
3

7 3 6 3
5
1

=

(
(2) (6) + (1) (3) + (4) (7) (2) (4) + (1) (2) + (4) (3) (2) (3) + (1) (5) + (4) (1)
(7) (6) + (3) (3) + (6) (7) (7) (4) + (3) (2) + (6) (3) (7) (3) + (3) (5) + (6) (1)

=

(
12 + 3 + 28 8 + 2 + 12 6 + 5 + 4
42 + 9 + 42 28 + 6 + 18 21 + 15 + 6
AB =

(
43 22 15
93 52 42

It is to be noticed that order of AB is 2 3, which is the number of rows of
first matrix A by the number of columns of the second matrix B.
Note : (i) If AB = AC, it is not necessarily true that B = C. (i.e.) the equal
matrices in the identity cannot be cancelled as in algebra.
(ii) AB = O does not necessarily imply A = O or B = O
For example, A =

(
(
1 1
1 1
O and B =

(
1 1
1 1
O
but AB =

(
(
1 1
1 1

(
1 1
1 1
=

(
0 0
0 0
= O
(iii) If A is a square matrix then A.A is also a square matrix of the
same order. AA is denoted by A
2
. Similarly A
2
A = AAA = A
3

If I is a unit matrix, then I = I
2
= I
3
= = I
n
.
1.1.5 Algebraic properties of matrices:
(1) Matrix addition is commutative:
If A and B are any two matrices of the same order then A + B = B + A.
This property is known as commutative property of matrix addition.
(2) Matrix addition is associative:
i.e. If A, B and C are any three matrices of the same order
9
thenA+(B + C) = (A+B)+C. This property is known as associative property
of matrix addition.
(3) Additive identity:
Let A be any matrix then A + O = O + A = A. This property is known as
identity property of matrix addition.
The zero matrix O is known as the identity element with respect to matrix
addition.
(4) Additive inverse:
Let A be any matrix then A + ( A) = ( A) + A = O. This property is
known as inverse property with respect to matrix addition.
The negative of matrix A i.e. A is the inverse of A with respect to matrix
addition.
(5) In general, matrix multiplication is not commutative i.e. AB BA
(6) Matrix multiplication is associative i.e. A(BC) = (AB)C
(7) Matrix multiplication is distributive over addition
i.e. (i) A(B + C) = AB + AC (ii) (A + B)C = AC + BC
(8) AI = IA = A where I is the unit matrix or identity matrix. This is known as
identity property of matrix multiplication.
Example 1.3: If A =

(
1 8
4 3
B =

(
1 3
7 4
C =

(
(
4 6
3 5

Prove that (i) AB BA (ii) A(BC) = (AB)C
(iii) A(B + C) = AB + AC (iv) AI = IA = A
Solution:
(i) AB =

(
1 8
4 3

(
1 3
7 4
=

(
(1) (1) + (8) (7) (1) (3) + (8) (4)
(4) (1) + (3) (7) (4) (3) + (3) (4)

=

(
1 + 56 3 + 32
4 + 21 12 + 12
=

(
57 35
25 24
(1)
BA =

(
1 3
7 4

(
1 8
4 3
=

(
(1) (1) + (3) (4) (1) (8) + (3) (3)
(7) (1) + (4) (4) (7) (8) + (4) (3)

=

(
1 + 12 8 + 9
7 + 16 56 + 12
=

(
13 17
23 68
(2)
From (1) and (2) we have AB BA
(ii) (AB)C =

(
57 35
25 24

(
(
4 6
3 5
from (1)
=

(
(
(57) ( 4) + (35) (3) (57) (6) + (35) ( 5)
(25) ( 4) + (24) (3) (25) (6) + (24) ( 5)

10
=

(
(
228 + 105 342 175
100 + 72 150 120

(AB)C =

(
(
123 167
28 30
(3)
BC =

(
1 3
7 4

(
(
4 6
3 5

=

(
(
(1) ( 4) + (3) (3) (1) (6) + (3) ( 5)
(7) ( 4) + (4) (3) (7) (6) + (4) ( 5)
=

(
(
4 + 9 6 15
28 + 12 42 20

BC =

(
(
5 9
16 22

A(BC) =

(
1 8
4 3

(
(
5 9
16 22

=

(
(
(1) (5) + (8) ( 16) (1) ( 9) + (8) (22)
(4) (5) + (3) ( 16) (4) ( 9) + (3) (22)
=

(
(
5 128 9 + 176
20 48 36 + 66

A(BC) =

(
(
123 167
28 30
(4)
From (3) and (4) we have, (AB)C = A(BC)
(iii) B + C =

(
1 3
7 4
+

(
(
4 6
3 5
=

(
(
1 4 3 + 6
7 + 3 4 5
=

(
(
3 9
10 1

A(B + C) =

(
1 8
4 3

(
(
3 9
10 1
=

(
(
3 + 80 9 8
12 + 30 36 3

A(B + C) =

(
77 1
18 33
(5)
AB =

(
57 35
25 24
from (1)
AC =

(
1 8
4 3

(
(
4 6
3 5
=

(
(
4 + 24 6 40
16 + 9 24 15
=

(
(
20 34
7 9

AB + AC =

(
57 35
25 24
+

(
(
20 34
7 9
=

(
(
57 + 20 35 34
25 7 24 + 9

=

(
77 1
18 33
(6)
11
From equations (5) and (6) we have A(B + C) = AB + AC
(iv) Since order of A is 2 2, take I =

(
1 0
0 1
.
AI =

(
1 8
4 3

(
1 0
0 1
=

(
1(1) + 8(0) 1(0) + 8(1)
4(1) + 3(0) 4(0) + 3(1)
=

(
1 + 0 0 + 8
4 + 0 0 + 3

=

(
1 8
4 3
= A (7)
IA =

(
1 0
0 1

(
1 8
4 3
=

(
1(1) + 0(4) 1(8) + 0(3)
0(1) + 1(4) 0(8) + 1(3)
=

(
1 + 0 8 + 0
0 + 4 0 + 3

=

(
1 8
4 3
= A (8)
From(7) and (8) AI = IA = A
Example 1.4: If A =

(
2 3
4 5
find A
2
7A 2I
Solution: A
2
= AA =

(
2 3
4 5

(
2 3
4 5
=

(
4 + 12 6 + 15
8 + 20 12 + 25

A
2
=

(
16 21
28 37
(1)
7A = 7

(
2 3
4 5
=

(
(
14 21
28 35
(2)
2I = 2

(
1 0
0 1
=

(
(
2 0
0 2
(3)
(1) + (2) + (3) gives A
2
7A 2I = A
2
+ ( 7A) + ( 2I)
=

(
16 21
28 37
+

(
(
14 21
28 35
+

(
(
2 0
0 2

i.e. A
2
7A 2I =

(
(
16 14 2 21 21 + 0
28 28 + 0 37 35 2
=

(
0 0
0 0
= O
Example 1.5: If A =

(
1 4
0 3
and B =

(
5 0
3 9
,
show that (A + B)
2
A
2
+ 2AB + B
2

12
Solution: A + B =

(
1 4
0 3
+

(
5 0
3 9
=

(
1 + 5 4 + 0
0 + 3 3 + 9
=

(
6 4
3 12

(A + B)
2
= (A + B) (A + B) =

(
6 4
3 12

(
6 4
3 12
=

(
36 + 12 24 + 48
18 + 36 12 + 144

(A + B)
2
=

(
48 72
54 156
(1)
A
2
= A.A =

(
1 4
0 3

(
1 4
0 3
=

(
1 + 0 4 + 12
0 + 0 0 + 9
=

(
1 16
0 9

B
2
= B.B =

(
5 0
3 9

(
5 0
3 9
=

(
25 + 0 0 + 0
15 + 27 0 + 81
=

(
25 0
42 81

AB =

(
1 4
0 3

(
5 0
3 9
=

(
5 + 12 0 + 36
0 + 9 0 + 27
=

(
17 36
9 27

2AB = 2

(
17 36
9 27
=

(
34 72
18 54

A
2
+ 2AB + B
2
=

(
1 16
0 9
+

(
34 72
18 54
+

(
25 0
42 81
=

(
1 + 34 + 25 16 + 72 + 0
0 + 18 + 42 9 + 54 + 81

A
2
+ 2AB + B
2
=

(
60 88
60 144
(2)
From (1) and (2) we have
(A + B)
2
A
2
+ 2AB + B
2

Example 1.6: Find the value of x if [2x 3]

(
1 2
3 0

(
x
3
= O
Solution: [2x 9 4x + 0]

(
x
3
= O (Multiplying on first two matrices)
[ ] (2x 9)x + 4x(3) = O [2x
2
9x + 12x] = O
[2x
2
+ 3x] = O
i.e. 2x
2
+ 3x = 0 x(2x + 3) = 0
Hence we have x = 0, x =
3
2

Example 1.7: Solve: X + 2Y =

(
4 6
8 10
; X Y =

(
1 0
2 2

13
Solution: Given X + 2Y =

(
4 6
8 10
(1)
X Y =

(
1 0
2 2
(2)
(1) (2) (X + 2Y) (X Y) =

(
4 6
8 10

(
1 0
2 2

3Y =

(
3 6
6 12
Y =
1
3

(
3 6
6 12

Y =

(
1 2
2 4

Substituting matrix Y in equation (1) we have
X + 2

(
1 2
2 4
=

(
4 6
8 10

X +

(
2 4
4 8
=

(
4 6
8 10

X =

(
4 6
8 10

(
2 4
4 8
=

(
2 2
4 2

X =

(
2 2
4 2
and Y =

(
1 2
2 4

EXERCISE 1.1
(1) Construct a 3 3 matrix whose elements are (i) a
ij
= i + j (ii) a
ij
= i j
(2) Find the values of x, y, z if

(
(
x 3x y
2x + z 3y w
=

(
0 7
3 2a

(3) If

(
(
2x 3x y
2x + z 3y w
=

(
3 2
4 7
find x, y, z, w
(4) If A =

(
2 1
4 2
, B =

(
4 2
1 4
and C =

(
2 3
1 2
find each of the
following
(i) 2A + (B + C) (ii) A (3B C) (iii) A + (B + C) (iv) (A + B) + C
(v) A + B (vi) B + A (vii) AB (viii) BA
14
(5) Given A =

(
(
(
1 2 3
1 3 4
2 0 1
B =

(
(
(
2 0 1
2 1 2
1 1 1
and C =

(
(
(
1 1 1
2 1 2
1 1 1

verify the following results:
(i) AB BA (ii) (AB) C = A(BC) (iii) A(B + C) = AB + AC
(6) Solve : 2X + Y +

(
(
(
2 1 3
5 7 3
4 5 4
= O ; X Y =

(
(
(
4 7 0
1 2 6
2 8 5

(7) If A=

(
(
3 5
4 2
, show that A
2
5A 14 I = O where I is the unit matrix
of order 2.
(8) If A =

(
(
3 2
4 2
find k so that A
2
= kA 2I
(9) If A =

(
(
(
1 2 2
2 1 2
2 2 1
, show that A
2
4A 5I = O
(10) Solve for x if

(
(
x
2
1
2 3
+

(
2x 3
1 4
=

(
3 4
3 7

(11) Solve for x if [x 2 1]

(
(
(
1 1 2
1 4 1
1 1 2

(
(
(
x
2
1
= [0]
(12) If A =

(
1 2
2 0
B =

(
3 1
1 0
verify the following:
(i) (A + B)
2
= A
2
+ AB + BA + B
2
(ii) (A B)
2
A
2
2AB + B
2

(iii) (A + B)
2
A
2
+ 2AB + B
2
(iv) (A B)
2
= A
2
AB BA + B
2

(v) A
2
B
2
(A + B) (A B)
(13) Find matrix C if A =

(
3 7
2 5
B =

(
(
3 2
4 1
and 5C + 2B = A
(14) If A =

(
(
1 1
2 1
and B =

(
x 1
y 1
and (A + B)
2
= A
2
+ B
2
, find x and y.
15
1.2 Determinants
1.2.1 Introduction:
The term determinant was first introduced by Gauss in 1801 while
discussing quadratic forms. He used the term because the determinant
determines the properties of the quadratic forms. We know that the area of a
triangle with vertices (x
1
, y
1
) (x
2
, y
2
) and (x
3
, y
3
) is

1
2

[ ]
x
1
(y
2
y
3
) + x
2
(y
3
y
1
) + x
3
(y
1
y
2
) (1)
Similarly the condition for a second degree equation in x and y to represent
a pair of straight lines is abc + 2fgh af
2
bg
2
ch
2
= 0 (2)
To minimize the difficulty in remembering these type of expressions,
Mathematicians developed the idea of representing the expression in
determinant form.
The above expression (1) can be represented in the form
1
2

x
1
y
1
1
x
2
y
2
1
x
3
y
3
1
.
Similarly the second expression (2) can be expressed as

a h g
h b f
g f c
= 0.
Again if we eliminate x, y, z from the three equations
a
1
x + b
1
y + c
1
z = 0 ; a
2
x +b
2
y + c
2
z = 0 ; a
3
x + b
3
y +c
3
z = 0,
we obtain a
1
(b
2
c
3
b
3
c
2
) b
1
(a
2
c
3
a
3
c
2
) + c
1
(a
2
b
3
a
3
b
2
) = 0
This can be written as

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3
= 0. Thus a determinant is a particular
type of expression written in a special concise form. Note that the quantities are
arranged in the form of a square between two vertical lines. This arrangement is
called a determinant.
Difference between a matrix and a determinant
(i) A matrix cannot be reduced to a number. That means a matrix is a
structure alone and is not having any value. But a determinant can be
reduced to a number.
(ii) The number of rows may not be equal to the number of columns in a
matrix. In a determinant the number of rows is always equal to the
number of columns.
16
(iii) On interchanging the rows and columns, a different matrix is formed.
In a determinant interchanging the rows and columns does not alter
the value of the determinant.
1.2.2 Definitions:
To every square matrix A of order n with entries as real or complex
numbers, we can associate a number called determinant of matrix A and it is
denoted by | A | or det (A) or .
Thus determinant formed by the elements of A is said to be the determinant
of matrix A.
If A =

(
(
a
11
a
12
a
21
a
22
then its | A | =

a
11
a
12
a
21
a
22
= a
11
a
22
a
21
a
12

To evaluate the determinant of order 3 or above we define minors and
cofactors.
Minors:
Let | A | =
| |
[a
ij
] be a determinant of order n. The minor of an arbitrary
element a
ij
is the determinant obtained by deleting the i
th
row and j
th
column in
which the element a
ij
stands. The minor of a
ij
is denoted by M
ij
.
Cofactors:
The cofactor is a signed minor. The cofactor of a
ij
is denoted by A
ij
and is
defined as A
ij
= ( 1)
i + j
M
ij
.
The minors and cofactors of a
11
, a
12
, a
13
of a third order determinant

a
11
a
12
a
13
a
21
a
22
a
23
a
31
a
32
a
33
are as follows:
(i) Minor of a
11
is M
11
=

a
22
a
23
a
32
a
33
= a
22
a
33
a
32
a
23
.
Cofactor of a
11
is A
11
= (1)
1 + 1
M
11
=

a
22
a
23
a
32
a
33
= a
22
a
33
a
32
a
23

(ii) Minor of a
12
is M
12
=

a
21
a
23
a
31
a
33
= a
21
a
33
a
31
a
23

Cofactor of a
12
is A
12
= (1)
1+2
M
12
=

a
21
a
23
a
31
a
33
= (a
21
a
33
a
23
a
31
)
17
(iii) Minor of a
13
is M
13
=

a
21
a
22
a
31
a
32
= a
21
a
32
a
31
a
22
Cofactor of a
13
is A
13
= ( 1)
1 + 3
M
13
=

a
21
a
22
a
31
a
32
= a
21
a
32
a
31
a
22

Note: A determinant can be expanded using any row or column as given below:
Let A =

a
11
a
12
a
13
a
21
a
22
a
23
a
31
a
32
a
33

= a
11
A
11
+ a
12
A
12
+ a
13
A
13
or a
11
M
11
a
12
M
12
+ a
13
M
13

(expanding by R
1
)
= a
11
A
11
+ a
21
A
21
+ a
31
A
31
or a
11
M
11
a
21
M
21
+ a
31
M
31

(expanding by C
1
)
= a
21
A
21
+ a
22
A
22
+ a
23
A
23
or a
21
M
21
+ a
22
M
22
a
23
M
23

(expanding by R
2
)
Example 1.8:
Find the minor and cofactor of each element of the determinant

3 4 1
0 1 2
5 2 6

Solution: Minor of 3 is M
11
=

1 2
2 6
= 6 + 4 = 2
Minor of 4 is M
12
=

0 2
5 6
= 0 10 = 10
Minor of 1 is M
13
=

0 1
5 2
= 0 + 5 = 5
Minor of 0 is M
21
=

4 1
2 6
= 24 + 2 = 26
Minor of 1 is M
22
=

3 1
5 6
= 18 5 = 13
Minor of 2 is M
23
=

3 4
5 2
= 6 20 = 26
18
Minor of 5 is M
31
=

4 1
1 2
= 8 + 1 = 9
Minor of 2 is M
32
=

3 1
0 2
= 6 0 = 6
Minor of 6 is M
33
=

3 4
0 1
= 3 0 = 3
Cofactor of 3 is A
11
= ( 1)
1 + 1
M
11
= M
11
= 2
Cofactor of 4 is A
12
= ( 1)
1 + 2
M
12
= M
12
= 10
Cofactor of 1 is A
13
= ( 1)
1 + 3
M
13
= M
13
= 5
Cofactor of 0 is A
21
= ( 1)
2 + 1
M
21
= M
21
= 26
Cofactor of 1 is A
22
= ( 1)
2 + 2
M
22
= M
22
= 13
Cofactor of 2 is A
23
= ( 1)
2 + 3
M
23
= M
23
= 26
Cofactor of 5 is A
31
= ( 1)
3 + 1
M
31
= M
31
= 9
Cofactor of 2 is A
32
= ( 1)
3 + 2
M
32
= M
32
= 6
Cofactor of 6 is A
33
= ( 1)
3 + 3
M
33
= M
33
= 3
Singular and non-singular matrices:
A square matrix A is said to be singular if | A | = 0
A square matrix A is said to be non-singular matrix, if | A | 0.
For example, A =

(
(
(
1 2 3
4 5 6
7 8 9
is a singular matrix.
Q | A | =

1 2 3
4 5 6
7 8 9
= 1

5 6
8 9
2

4 6
7 9
+ 3

4 5
7 8

= 1(45 48) 2 (36 42) + 3(32 35)
= 3 + 12 9 = 0
B =

(
(
(
1 7 5
2 6 3
4 8 9
is a non-singular matrix.
Q | B | =

1 7 5
2 6 3
4 8 9
= 1

6 3
8 9
7

2 3
4 9
+ 5

2 6
4 8

19
= 1(54 24) 7(18 12) + 5 (16 24)
= 1(30) 7(6) + 5( 8)
= 52 0
The matrix B is a non-singular matrix.
1.2.3 Properties of Determinants
There are many properties of determinants, which are very much useful in
solving problems. The following properties are true for determinants of any
order. But here we are going to prove the properties only for the determinant of
order 3.
Property 1:
The value of a determinant is unaltered by interchanging its rows and
columns.
Proof:
Let =

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3
.
Expanding by the first row we get,
= a
1
(b
2
c
3
b
3
c
2
) b
1
(a
2
c
3
a
3
c
2
) + c
1
(a
2
b
3
a
3
b
2
)
= a
1
b
2
c
3
a
1
b
3
c
2
a
2
b
1
c
3
+ a
3
b
1
c
2
+ a
2
b
3
c
1
a
3
b
2
c
1
(1)
Let us interchange the rows and columns of . Thus we get a new
determinant.

1
=

a
1
a
2
a
3
b
1
b
2
b
3
c
1
c
2
c
3
. Since determinant can be expanded by any row or any
column we get

1
= a
1
(b
2
c
3
c
2
b
3
) b
1
(a
2
c
3
c
2
a
3
) + c
1
(a
2
b
3
b
2
a
3
)
= a
1
b
2
c
3
a
1
b
3
c
2
a
2
b
1
c
3
+ a
3
b
1
c
2
+ a
2
b
3
c
1
a
3
b
2
c
1
(2)
From equations (1) and (2) we have =
1
Hence the result.
Property 2:
If any two rows (columns) of a determinant are interchanged the
determinant changes its sign but its numerical value is unaltered.
Proof:
Let =

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3

20
= a
1
(b
2
c
3
b
3
c
2
) b
1
(a
2
c
3
a
3
c
2
) + c
1
(a
2
b
3
a
3
b
2
)
= a
1
b
2
c
3
a
1
b
3
c
2
a
2
b
1
c
3
+ a
3
b
1
c
2
+ a
2
b
3
c
1
a
3
b
2
c
1
(1)
Let
1
be the determinant obtained from by interchanging the first and
second rows. i.e. R
1
and R
2
.

1
=

a
2
b
2
c
2
a
1
b
1
c
1
a
3
b
3
c
3

Now we have to show that
1
= .
Expanding
1
by R
2
, we have,

1
= a
1
(b
2
c
3
b
3
c
2
) + b
1
(a
2
c
3
a
3
c
2
) c
1
(a
2
b
3
a
3
b
2
)
= [a
1
b
2
c
3
a
1
b
3
c
2

+
a
2
b
1
c
3
+ a
3
b
1
c
2
+ a
2
b
3
c
1
a
3
b
2
c
1
] (2)
From (1) and (2) we get
1
= .
Similarly we can prove the result by interchanging any two columns.
Corollary:
The sign of a determinant changes or does not change according as there is
an odd or even number of interchanges among its rows (columns).
Property 3:
If two rows (columns) of a determinant are identical then the value of the
determinant is zero.
Proof:
Let be the value of the determinant. Assume that the first two rows are
identical. By interchanging R
1
and R
2
we obtain (by property2). Since R
1

and R
2
are identical even after the interchange we get the same .
i.e. = 2 = 0 i.e. = 0
Property 4:
If every element in a row (or column) of a determinant is multiplied by a
constant k then the value of the determinant is multiplied by k.
Proof:
Let =

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3

21

Let
1
be the determinant obtained by multiplying the elements of the first
row by k then
1
=

ka
1
kb
1
kc
1
a
2
b
2
c
2
a
3
b
3
c
3
.
Expanding along R
1
we get,

1
= ka
1
(b
2
c
3
b
3
c
2
) kb
1
(a
2
c
3
a
3
c
2
) + kc
1
(a
2
b
3
a
3
b
2
)
= k[a
1
b
2
c
3
a
1
b
3
c
2
a
2
b
1
c
3
+ a
3
b
1
c
2
+ a
2
b
3
c
1
a
3
b
2
c
1
]

1
= k. Hence the result.
Note:
(1) Let A be any square matrix of order n. Then kA is also a square matrix
which is obtained by multiplying every entry of the matrix A with the
scalar k. But the determinant k |A| means every entry in a row (or a
column) is multiplied by the scalar k.
(2) Let A be any square matrix of order n then | kA | = k
n
| A |.
Deduction from properties (3) and (4)
If two rows (columns) of a determinant are proportional i.e. one row
(column) is a scalar multiple of other row (column) then its value is zero.
Property 5:
If every element in any row (column) can be expressed as the sum of two
quantities then given determinant can be expressed as the sum of two
determinants of the same order with the elements of the remaining rows
(columns) of both being the same.
Proof: Let =

1
+ x
1

1
+ y
1

1
+ z
1
b
1
b
2
b
3
c
1
c
2
c
3

Expanding along the first row, we get
= (
1
+ x
1
)

b
2
b
3
c
2
c
3
(
1
+ y
1
)

b
1
b
3
c
1
c
3
+ (
1
+ z
1
)

b
1
b
2
c
1
c
2

=

)
`

b
2
b
3
c
2
c
3

1

b
1
b
3
c
1
c
3
+
1

b
1
b
2
c
1
c
2

+

)
`

x
1

b
2
b
3
c
2
c
3
y
1

b
1
b
3
c
1
c
3
+ z
1

b
1
b
2
c
1
c
2

22
=

1

1

1
b
1
b
2
b
3
c
1
c
2
c
3
+

x
1
y
1
z
1
b
1
b
2
b
3
c
1
c
2
c
3

Hence the result.
Note: If we wish to add (or merge) two determinants of the same order we add
corresponding entries of a particular row (column) provided the other entries in
rows (columns) are the same.
Property 6:
A determinant is unaltered when to each element of any row (column) is
added to those of several other rows (columns) multiplied respectively by
constant factors.
i.e. A determinant is unaltered when to each element of any row (column)
is added by the equimultiples of any parallel row (column).
Proof:
Let =

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3

Let
1
be a determinant obtained when to the elements of C
1
of are
added to those of second column and third column multiplied respectively by l
and m.

1
=

a
1
+ lb
1
+ mc
1
b
1
c
1
a
2
+ lb
2
+ mc
2
b
2
c
2
a
3
+ lb
3
+ nc
3
b
3
c
3


=

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3
+

lb
1
b
1
c
1
lb
2
b
2
c
2
lb
3
b
3
c
3
+

mc
1
b
1
c
1
mc
2
b
2
c
2
mc
3
b
3
c
3
(by property 5)
=

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3
+ 0 + 0

(
Q
C
1
is proportional to C
2
in the second det.
C
1
is proportional to C
3
in the third det.

Therefore
1
= . Hence the result.
Note:
(1) Multiplying or dividing all entries of any one row (column) by the
same scalar is equivalent to multiplying or dividing the determinant
by the same scalar.
23
(2) If all the entries above or below the principal diagonal are zero (upper
triangular, lower triangular) then the value of the determinant is equal
to the product of the entries of the principal diagonal.
For example, let us consider
| A | =

3 2 7
0 5 3
0 0 1
= 3(5 0) 2(0 0) + 7(0 0) = 15
The value of the determinant A is 15.
The product of the entries of the principal diagonal is 3 5 1 = 15.
Example 1.9: Solve

x 1 x x 2
0 x 2 x 3
0 0 x 3
= 0
Solution: Since all the entries below the principal diagonal are zero, the value
of the determinant is (x 1) (x 2) (x 3)
(x 1) (x 2) (x 3) = 0 x = 1, x = 2, x = 3
Example 1.10: Solve for x if

x 5
7 x
+

1 2
1 1
= 0
Solution :

x 5
7 x
+

1 2
1 1
= 0
(x
2
35) + (1 2) = 0 x
2
35 1 = 0 x
2
36 = 0
x
2
= 36 x = 6
Example 1.11: Solve for x if

0 1 0
x 2 x
1 3 x
= 0
Solution:
(0)

2 x
3 x
1

x x
1 x
+ (0)

x 2
1 3
= 0 0 1[x
2
x] + 0 = 0
x
2
+ x = 0 i.e. x(1 x) = 0 x = 0, x = 1
Example 1.12: Evaluate (i)

1 a b + c
1 b c + a
1 c a + b
(ii)

x + 2a x + 3a x + 4a
x + 3a x + 4a x + 5a
x + 4a x + 5a x + 6a

Solution:
(i) Let =

1 a b + c
1 b c + a
1 c a + b
=

1 a a + b + c
1 b a + b + c
1 c a + b + c
C
3
C
3
+ C
2
24
= 0 [Q C
1
is proportional to C
3
]

(ii) Let =

x + 2a x + 3a x + 4a
x + 3a x + 4a x + 5a
x + 4a x + 5a x + 6a
=

x + 2a a 2a
x + 3a a 2a
x + 4a a 2a

C
2
C
2
C
1
C
3
C
3
C
1

= 0 [Q C
2
is proportional to C
3
]
Example 1.13: Prove that

2x + y x y
2y + z y z
2z + x z x
= 0
Solution:

2x + y x y
2y + z y z
2z + x z x
=

2x x y
2y y z
2z z x
+

y x y
z y z
x z x

= 0 + 0

(
Q
C
1
is proportional to C
2
in the first det.
C
1
is identical to C
3
in the second det.

= 0
Example 1.14: Prove that

1 a a
2
1 b b
2
1 c c
2
= (a b) (b c) (c a)
Solution:

1 a a
2
1 b b
2
1 c c
2
=

0 a b a
2
b
2
0 b c b
2
c
2
1 c c
2

R
1
R
1
R
2
R
2
R
2
R
3


= (a b) (b c)

0 1 a + b
0 1 b + c
1 c c
2

Take (a b) and (b c)
from R
1
and R
2
respectively.

= (ab) (bc) [ ] (1) (b + c) (1) (a + b) = (ab) (bc) (ca)
Example 1.15: Prove that

1 1 1
1 1 + x 1
1 1 1 + y
= xy
Solution:

1 1 1
1 1 + x 1
1 1 1 + y
=

1 1 1
0 x 0
0 0 y


R
2
R
2
R
1
R
3
R
3
R
1

= xy [Q upper diagonal matrix]
25
Example 1.16: Prove that

1/a
2
bc b + c
1/b
2
ca c + a
1/c
2
ab a + b
= 0

1/a
2
bc b + c
1/b
2
ca c + a
1/c
2
ab a + b
=
1
abc

1/a abc a(b + c)


1/b abc b(c + a)
1/c abc c(a + b)

Multiply R
1
, R
2
, R
3
by a, b, c
respectively

=
abc
abc

1/a 1 a(b + c)
1/b 1 b(c + a)
1/c 1 c(a + b)
Take abc from C
2

=
1
abc

bc 1 a(b + c)
ca 1 b(c + a)
ab 1 c(a + b)
Multiply C
1
by abc
=
1
abc

bc 1 ab + bc + ca
ca 1 ab + bc + ca
ab 1 ab + bc + ca
C
3
C
3
+ C
1

=
(ab+bc+ca)
abc

bc 1 1
ca 1 1
ab 1 1
Take (ab + bc + ca) from C
3

=
(ab + bc + ca)
abc
(0) [Q C
2
is identical to C
3
]
= 0
Example 1.17: Prove that

b
2
c
2
bc b + c
c
2
a
2
ca c + a
a
2
b
2
ab a + b
= 0
Solution: Let =

b
2
c
2
bc b + c
c
2
a
2
ca c + a
a
2
b
2
ab a + b

Multiply R
1
, R
2
and R
3
by a, b and c respectively
=
1
abc

ab
2
c
2
abc ab + ac
bc
2
a
2
abc bc + ab
ca
2
b
2
abc ca + bc

26
=
(abc)
2
abc

bc 1 ab + ac
ca 1 bc + ab
ab 1 ca + bc
Take abc from C
1
and C
2

= abc

bc 1 ab + bc + ca
ca 1 ab + bc + ca
ab 1 ab + bc + ca
C
3
C
3
+ C
1
= abc (ab + bc + ca)

bc 1 1
ca 1 1
ab 1 1
Take (ab + bc + ca) from C
3

= abc (ab + bc + ca) (0) [Q C
2
is identical to C
3
]
= 0
Example 1.18 : Prove that

a+b+c c b
c a+b+c a
b a a+b+c
= 2(a+b) (b+c) (c+a)
Solution:

a+b+c c b
c a+b+c a
b a a+b+c
=

a + b a + b (a + b)
(b + c) b + c b + c
b a a + b + c

R
1
R
1
+ R
2
R
2
R
2
+ R
3


= (a + b) (b + c)

1 1 1
1 1 1
b a a+b+c

Take (a + b), (b + c)
from R
1
and R
2
respectively

= (a + b) (b + c)

0 2 0
1 1 1
b a a + b + c

R
1
R
1
+ R
2



= (a + b) (b + c) ( 2)

1 1
b a + b + c

= (a + b) (b + c) ( 2) [ ] (a + b + c) + b
= (a + b) (b + c) ( 2) [ a c]
= 2(a + b) (b + c) (c + a)
Example 1.19: Prove that

a
2
+ ab ac
ab b
2
+ bc
ac bc c
2
+
=
2
(a
2
+ b
2
+ c
2
+ )
27
Solution: Let =

a
2
+ ab ac
ab b
2
+ bc
ac bc c
2
+

Multiply R
1
, R
2
and R
3
,by a, b and c respectively
=
1
abc

a(a
2
+ ) a
2
b a
2
c
ab
2
b(b
2
+ ) b
2
c
ac
2
bc
2
c(c
2
+ )

Take a, b and c from C
1
, C
2
and C
3
respectively
=
abc
abc

a
2
+ a
2
a
2
b
2
b
2
+ b
2
c
2
c
2
c
2
+

=

a
2
+b
2
+c
2
+ a
2
+b
2
+c
2
+ a
2
+b
2
+c
2
+
b
2
b
2
+ b
2
c
2
c
2
c
2
+

R
1
R
1
+ R
2
+ R
3



= (a
2
+ b
2
+ c
2
+ )

1 1 1
b
2
b
2
+ b
2
c
2
c
2
c
2
+

= (a
2
+ b
2
+ c
2
+ )

1 0 0
b
2
0
c
2
0

C
2
C
2
C
1
C
3
C
3
C
1

= (a
2
+ b
2
+ c
2
+ )

0
0

a
2
+ ab ac
ab b
2
+ bc
ac bc c
2
+
=
2
(a
2
+ b
2
+ c
2
+ )
EXERCISE 1.2
(1) Find the value of the determinant

2 6 4
5 15 10
1 3 2
without usual
expansion.
28
(2) Identify the singular and non-singular matrix
(i)

(
(
(
1 4 9
4 9 16
9 16 25
(ii)

(
(
(
1 2 3
4 5 6
2 4 6

(3) Solve (i)

2 x 4
3 2 1
1 2 3
= 3 (ii)

4 3 9
3 2 7
4 4 x
= 1
(4) Evaluate (i)

a b b c c a
b c c a a b
c a a b b c
(ii)

1 ab c(a + b)
1 bc a(b + c)
1 ca b(c + a)

(5) Prove that

a b c 2a 2a
2b b c a 2b
2c 2c c a b
= (a + b + c)
3

(6) Prove that

1 + a 1 1
1 1 + b 1
1 1 1 + c
= abc
\
|
.
|
1 +
1
a
+
1
b
+
1
c

where a, b, c are non zero real numbers and hence evaluate the
value of

1 + a 1 1
1 1 + a 1
1 1 1 + a

(7) Prove that

1 a a
3
1 b b
3
1 c c
3
= (a b) (b c) (c a) (a + b + c)
(8) If x, y, z are all different and

x x
2
1 x
3
y y
2
1 y
3
z z
2
1 z
3
= 0
then show that xyz = 1
(9) Prove that (i)

1 a a
2
1 b b
2
1 c c
2
=

1 a bc
1 b ca
1 c ab

(ii)

y + z x y
z + x z x
x + y y z
= (x + y + z) (x z)
2

29
(10) Prove that
(i)

b+c c+a a+b


q+r r+p p+q
y+z z+x x+y
=2

a b c
p q r
x y z
(ii)

a
2
ab ac
ab b
2
bc
ac bc c
2
= 4a
2
b
2
c
2

(iii)

a b c
b c a
c a b
= 3abc a
3
b
3
c
3

(iv)

a b c
a b b c c a
b + c c + a a + b
= a
3
+ b
3
+ c
3
3abc
1.2.4 Factor method
Application of Remainder theorem to determinants
Theorem:
If each element of a determinant () is polynomial in x and if vanishes
for x = a then (x a) is a factor of .
Proof:
Since the elements of are polynomial in x, on expansion will be a
polynomial function in x. (say p(x)). For x = a, = 0
i.e. p(x) = 0 when x = a, i.e. p(a) = 0
By Remainder theorem (x a) is a factor of p(x).
i.e. (x a) is a factor of .
Note:
(1) This theorem is very much useful when we have to obtain the value of
the determinant in factors form. Thus, for example if on putting
a = b in the determinant any two of its rows or columns become
identical then = 0 and hence by the above theorem a b will be a
factor of .
(2) If r rows (column) are identical in a determinant of order n (n r)
when we put x = a, then (x a)
r 1
is a factor of .
(3) (x + a) is a factor of the polynomial f(x) if and only if x = a is a root
of the equation f(x) = 0.
30
Remark: In this section we deal certain problems with symmetric and cyclic
properties.
Example 1.20: Prove that

1 a a
3
1 b b
3
1 c c
3
= (a b) (b c) (c a) (a + b + c)
Solution:
Let =

1 a a
3
1 b b
3
1 c c
3
. Put a = b, =

1 b b
3
1 b b
3
1 c c
3
= 0 [Q R
1
is identical to R
2
]
(a b) is a factor of .
Similarly we observe that is symmetric in a, b, c, by putting b = c, c = a,
we get = 0. Hence (b c) and (c a) are also factors of . The product
(ab) (bc) (c a) is a factor of . The degree of this product is 3. The product
of leading diagonal elements is 1. b . c
3
. The degree of this product is 4.
By cyclic and symmetric properties, the remaining symmetric factor of
first degree must be k(a + b + c), where k is any non-zero constant.
Thus

1 a a
3
1 b b
3
1 c c
3
= (a b) (b c) (c a) k(a + b + c)
To find the value of k, give suitable values for a, b, c so that both sides do
not become zero. Take a = 0, b = 1, c = 2.

1 0 0
1 1 1
1 2 8
= k(3) ( 1) ( 1) (2) k = 1
= (a b) (b c) (c a) (a + b + c)
Note: An important note regarding the remaining symmetric factor in the
factorisation of cyclic and symmetric expression in a, b and c
If m is the difference between the degree of the product of the factors
(found by the substitution) and the degree of the product of the leading diagonal
elements and if
(1) m is zero then the other symmetric factor is a constant (k)
(2) m is one then the other symmetric factor of degree 1 is k(a + b + c)
(3) m is two then the other symmetric factor of degree 2 is
k(a
2
+ b
2
+ c
2
)+l (ab+bc+ca)
31
Example 1.21:
Prove by factor method

1 a
2
a
3
1 b
2
b
3
1 c
2
c
3
= (a b) (b c) (ca) (ab + bc + ca)
Solution:
Let =

1 a
2
a
3
1 b
2
b
3
1 c
2
c
3
Put a= b =

1 b
2
b
3
1 b
2
b
3
1 c
2
c
3
= 0 [Q R
1
R
2
]
(a b) is a factor of .
By symmetry on putting b = c and c = a we can easily show that
becomes zero and therefore (b c) and (c a) are also factors of .
This means the product (a b) (b c) (c a) is a factor of . The degree
of this product is 3. The degree of the product of leading diagonal elements b
2
c
3

is 5.
The other factor is k(a
2
+ b
2
+ c
2
) + l(ab + bc + ca)

1 a
2
a
3
1 b
2
b
3
1 c
2
c
3
= [ ] k(a
2
+ b
2
+ c
2
) + l(ab + bc + ca) (a b) (b c) (c a)
To determine k and l give suitable values for a, b and c so that both sides
do not become zero. Take a = 0, b = 1 and c = 2

1 0 0
1 1 1
1 4 8
= [ ] k (5) + l(2) ( 1) ( 1) (2)
4 = (5k + 2l) 2 5k + 2l = 2 (1)
Again put a = 0, b = 1 and c = 1

1 0 0
1 1 1
1 1 1
= [ ] k(2) + l( 1) (+ 1) ( 2) (1)
2 = (2k l) ( 2) 2k l = 1 (2)
On solving (1) and (2) we get k = 0 and l = 1
32
= (ab + bc + ca) (a b) (b c) (c a)
= (a b) (b c) (c a) (ab + bc + ca)
Example 1.22: Prove that

(b + c)
2
a
2
a
2
b
2
(c + a)
2
b
2
c
2
c
2
(a + b)
2
= 2abc (a + b + c)
3

Solution:
Let =

(b + c)
2
a
2
a
2
b
2
(c + a)
2
b
2
c
2
c
2
(a + b)
2
Put a = 0 we get
=

(b + c)
2
0 0
b
2
c
2
b
2
c
2
c
2
b
2
= 0 [Q C
2
is porportional to C
3
]
(a 0) = a is a factor of .
Similarly on putting b = 0, c = 0, we see that the value of is zero.
a, b, c are factors of . Put a + b + c = 0, we have
=

( a)
2
a
2
a
2
b
2
( b)
2
b
2
c
2
c
2
( c)
2
= 0
Since three columns are identical, (a + b + c)
2
is a factor of .
abc (a + b + c)
2
is a factor of and is of degree 5. The product of the
leading diagonal elements (b + c)
2
(c + a)
2
(a + b)
2
is of degree 6.
The other factor of must be k(a + b + c).

(b + c)
2
a
2
a
2
b
2
(c + a)
2
b
2
c
2
c
2
(a + b)
2
= k abc (a + b + c)
3

Take the values a = 1, b = 1 and c = 1

4 1 1
1 4 1
1 1 4
= k(1) (1) (1) (3)
3
54 = 27k k = 2
= 2abc (a + b + c)
3
33
Example 1.23: Show that

x a a
a x a
a a x
= (x a)
2
(x + 2a)
Solution:
Let =

x a a
a x a
a a x
Put x = a =

a a a
a a a
a a a
= 0
Since all the three rows are identical (x a)
2
is a factor of .
Put x = 2a.
=

2a a a
a 2a a
a a 2a
=

0 a a
0 2a a
0 a 2a
= 0 [C
1
C
1
+ C
2
+ C
3
]
(x + 2a) is a factor of .
(x a)
2
(x + 2a) is a factor of and is of degree 3. The degree of the
product of leading diagonal element is also 3. Therefore the other factor must be
k.

x a a
a x a
a a x
= k(x a)
2
(x + 2a).
Equate x
3
term on both sides, 1 = k

x a a
a x a
a a x
= (x a)
2
(x + 2a)
Example 1.24: Using factor method, prove

x+1 3 5
2 x+2 5
2 3 x+4
= (x1)
2
(x + 9)
Solution: Let =

x + 1 3 5
2 x + 2 5
2 3 x + 4

Put x = 1, =

2 3 5
2 3 5
2 3 5
= 0
Since all the three rows are identical, (x 1)
2
is a factor of .
34
Put x = 9 in , then =

8 3 5
2 7 5
2 3 5
=

0 3 5
0 7 5
0 3 5
= 0 [QC
1
C
1
+C
2
+C
3
]
(x + 9) is a factor of .
The product (x 1)
2
(x + 9) is a factor of and is of degree 3. The degree
of the product of leading diagonal elements (x + 1) (x + 2) (x + 4) is also 3.
The remaining factor must be a constant k

x + 1 3 5
2 x + 2 5
2 3 x + 4
= k(x 1)
2
(x + 9). Equating x
3
term on both
sides we get k = 1
Thus = (x 1)
2
(x + 9)
EXERCISE 1.3
(1) Using factor method show that

1 a a
2
1 b b
2
1 c c
2
= (a b) (b c) (c a)
(2) Prove by factor method

b + c a c a b
b c c + a b a
c b c a a + b
= 8abc
(3) Solve using factor method

x + a b c
a x + b c
a b x + c
= 0
(4) Factorise

a b c
a
2
b
2
c
2
bc ca ab

(5) Show that

b + c a a
2
c + a b b
2
a + b c c
2
= (a + b + c) (a b) (b c) (c a)
1.2.5 Product of determinants
Rule for multiplication of two determinants is the same as the rule for
multiplication of two matrices.
While multiplying two matrices row-by-column rule alone can be
followed. The process of interchanging the rows and columns will not affect the
value of the determinant. Therefore we can also adopt the following procedures
for multiplication of two determinants.
35
(1) Row-by-row multiplication rule
(2) Column-by-column multiplication rule
(3) Column-by-row multiplication rule
Note: The determinant of the product matrix is equal to the product of the
individual determinant values of the square matrices of same order.
i.e. Let A and B be two square matrices of the same order.
We have | AB | = | A | | B |
This statement is verified in the following example.
Example 1.25: If A =

(
(
cos sin
sin cos
, B =

(
(
cos sin
sin cos
are two square matrices
then show that | AB | = | A | | B |
Solution:
Given that A =

(
(
cos sin
sin cos
and B =

(
(
cos sin
sin cos

AB =

(
(
cos sin
sin cos

(
(
cos sin
sin cos

=

(
( cos
2
+ sin
2
cos sin sin cos
sin cos cos sin cos
2
+ sin
2

(
1 0
0 1

| AB | =

1 0
0 1
= 1 (1)
| A | =

cos sin
sin cos
= cos
2
+ sin
2
= 1
| B | =

cos sin
sin cos
= cos
2
+ sin
2
= 1
| A | | B | = 1 1 = 1 (2)
From (1) and (2) | AB | = | A | | B |
Example 1.26: Show that

o c b
c o a
b a o
2
=

b
2
+ c
2
ab ac
ab c
2
+ a
2
bc
ac bc a
2
+ b
2

Solution: L.H.S. =

o c b
c o a
b a o
2
=

o c b
c o a
b a o

o c b
c o a
b a o

=

o + c
2
+ b
2
o + o + ab o + ac + o
o + o + ab c
2
+ o + a
2
bc + o + o
o + ac + o bc + o + o b
2
+ a
2
+ 0

36
=

c
2
+ b
2
ab ac
ab c
2
+ a
2
bc
ac bc b
2
+ a
2
= R.H.S.
Example 1.27: Prove that

a
1
b
1
a
2
b
2
2
=

a
1
2
+ a
2
2
a
1
b
1
+ a
2
b
2
a
1
b
1
+ a
2
b
2
b
1
2
+ b
2
2

Solution:
L.H.S. =

a
1
b
1
a
2
b
2
2
=

a
1
b
1
a
2
b
2

a
1
b
1
a
2
b
2

=

a
1
a
2
b
1
b
2

a
1
b
1
a
2
b
2

\
|
.
|
Interchange rows and
columns of the first determinant

=

a
1
2
+ a
2
2
a
1
b
1
+ a
2
b
2
a
1
b
1
+ a
2
b
2
b
1
2
+ b
2
2

Example 1.28: Show that

2bc a
2
c
2
b
2
c
2
2ca b
2
a
2
b
2
a
2
2ab c
2
=

a b c
b c a
c a b
2

Solution:
R.H.S. =

a b c
b c a
c a b
2
=

a b c
b c a
c a b

a b c
b c a
c a b

=

a b c
b c a
c a b
( 1)

a b c
c a b
b c a
;
Interchanging R
2
and R
3
in the 2
nd
determinant

=

a b c
b c a
c a b

a b c
c a b
b c a

=

a
2
+bc + cb ab + ab + c
2
ac + b
2
+ ac
ab + c
2
+ ab b
2
+ ac + ac bc + bc + a
2
ac + ac + b
2
bc + a
2
+ bc c
2
+ ab + ba

=

2bc a
2
c
2
b
2
c
2
2ac b
2
a
2
b
2
a
2
2ab c
2
= L.H.S.
37
1.2.6 Relation between a determinant and its co-factor determinant
Consider =

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3

Let A
1
, B
1
, C
1
be the co-factors of a
1
, b
1
, c
1
in
The cofactor determinant is

A
1
B
1
C
1
A
2
B
2
C
2
A
3
B
3
C
3

Let be expanded by R
1
= a
1

b
2
c
2
b
3
c
3
b
1

a
2
c
2
a
3
c
3
+ c
1

a
2
b
2
a
3
b
3

= a
1
(co-factor of a
1
) + b
1
(co-factor of b
1
) + c
1
(co-factor of c
1
)
= a
1
A
1
+ b
1
B
1
+ c
1
C
1

i.e. The sum of the products of the elements of any row of a
determinant with the corresponding row of co-factor determinant is equal
to the value of the determinant.
Similarly = a
2
A
2
+ b
2
B
2
+ c
2
C
2
= a
3
A
3
+ b
3
B
3
+ c
3
C
3

Now let us consider the sum of the product of first row elements with the
corresponding second row elements of co-factor determinant i.e. let us consider
the expression
a
1
A
2
+ b
1
B
2
+ c
1
C
2

= a
1

b
1
c
1
b
3
c
3
+ b
1

a
1
c
1
a
3
c
3
c
1

a
1
b
1
a
3
b
3

= a
1
(b
1
c
3
b
3
c
1
) + b
1
(a
1
c
3
a
3
c
1
) c
1
(a
1
b
3
a
3
b
1
)
= 0
The expression a
1
A
2
+ b
1
B
2
+ c
1
C
2
= 0
Thus we have
a
1
A
3
+ b
1
B
3
+ c
1
C
3
= 0 ; a
2
A
1
+ b
2
B
1
+ c
2
C
1
= 0 ; a
2
A
3
+ b
2
B
3
+ c
2
C
3
= 0
a
3
A
1
+ b
3
B
1
+ c
3
C
1
= 0 ; a
3
A
2
+ b
3
B
2
+ c
3
C
2
= 0
i.e. The sum of the products of the elements of any row of a
determinant with any other row of co-factor determinant is equal to 0
Note: Instead of rows, if we take columns we get the same results.
= a
1
A
1
+ a
2
A
2
+ a
3
A
3

= b
1
B
1
+ b
2
B
2
+ b
3
B
3

= c
1
C
1
+ c
2
C
2
+ c
3
C
3

Thus the above results can be put in a tabular column as shown below.
38
Row-wise Column-wise
R
1
R
2
R
3
C
1
C
2
C
3

r
1

0 0
c
1

0 0
r
2
0 0
c
2
0 0
r
3
0 0
c
3
0 0
Where r
i
s c
i
s are i
th
row and i
th
column of the original determinant R
i
s, C
i
s
are i
th
row and i
th
column respectively of the corresponding co-factor determinant.
Example 1.29: If A
1
, B
1
, C
1
are the co-factors of a
1
, b
1
, c
1
in =

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3

then show that

A
1
B
1
C
1
A
2
B
2
C
2
A
3
B
3
C
3
=
2

Solution:

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3

A
1
B
1
C
1
A
2
B
2
C
2
A
3
B
3
C
3

=

a
1
A
1
+ b
1
B
1
+ c
1
C
1
a
1
A
2
+ b
1
B
2
+ c
1
C
2
a
1
A
3
+ b
1
B
3
+ c
1
C
3
a
2
A
1
+ b
2
B
1
+ c
2
C
1
a
2
A
2
+ b
2
B
2
+ c
1
C
2
a
2
A
3
+ b
2
B
3
+ c
2
C
3
a
3
A
1
+ b
3
B
1
+ c
3
C
1
a
3
A
2
+ b
3
B
2
+ c
3
C
2
a
3
A
3
+ b
3
B
3
+ c
3
C
3

=

0 0
0 0
0 0
=
3

i.e.

A
1
B
1
C
1
A
2
B
2
C
2
A
3
B
3
C
3
=
3

A
1
B
1
C
1
A
2
B
2
C
2
A
3
B
3
C
3
=
2

EXERCISE 1.4
(1) Show that

1 a a
a 1 a
a a 1
2
=

1 2a
2
a
2
a
2
a
2
1 a
2
2a
a
2
a
2
2a 1

(2) Show that

1 x x
2
1 y y
2
1 z z
2

a
2
1 2a
b
2
1 2b
c
2
1 2c
=

(a x)
2
(b x)
2
(c x)
2
(a y)
2
(b y)
2
(c y)
2
(a z)
2
(b z)
2
(c z)
2


39
2. VECTOR ALGEBRA
2.1 Introduction:
The development of the concept of vectors was influenced by the works of
the German Mathematician H.G. Grassmann (1809 1877) and the Irish
mathematician W.R. Hamilton (1805 1865). It is interesting to note that both
were linguists, being specialists in Sanskrit literature. While Hamilton occupied
high positions, Grassman was a secondary school teacher.
The best features of Quaternion Calculus and Cartesian Geometry were
united, largely through the efforts of the American Mathematician J.B. Gibbs
(1839 1903) and Q. Heariside (1850 1925) of England and new subject
called Vector Algebra was created. The term vectors was due to Hamilton and it
was derived from the Latin word to carry. The theory of vectors was also
based on Grassmans theory of extension.
It was soon realised that vectors would be the ideal tools for the fruitful
study of many ideas in geometry and physics. Vector algebra is widely used in
the study of certain type of problems in Geometry, Mechanics, Engineering and
other branches of Applied Mathematics.
Physical quantities are divided into two categories scalar quantities and
vector quantities.
Definitions:
Scalar : A quantity having only magnitude is called a scalar. It is not
related to any fixed direction in space.
Examples : mass, volume, density, work, temperature,
distance, area, real numbers etc.
To represent a scalar quantity, we assign a real number to it, which gives
its magnitude in terms of a certain basic unit of a quantity. Throughout this
chapter, by scalars we shall mean real numbers. Normally, scalars are denoted
by a, b, c
Vector : A quantity having both magnitude and direction is called a
vector.
Examples : displacement, velocity, acceleration, momentum,
force, moment of a force, weight etc.
Representation of vectors:
Vectors are represented by directed line segments such that the length of
the line segment is the magnitude of the vector and the direction of arrow
marked at one end denotes the direction of the vector.
40
A vector denoted by a

= AB

is
determined by two points A, B such that the
magnitude of the vector is the length of the

Fig. 2. 1
line segment AB and its direction is that from A to B. The point A is called
initial point of the vector AB

and B is called the terminal point. Vectors are


generally denoted by a

, b

, c

(read as vector a, vector b, vector c, )


Magnitude of a vector
The modulus or magnitude of a vector a

= AB

is a positive number
which is a measure of its length and is denoted by | | a

= | | AB

= AB The
modulus of a

is also written as a
Thus | | a

= a ; | | b

= b ; | | c

= c
| | AB

= AB ; | | CD

= CD ; | | PQ

= PQ
Caution: The two end points A and B are not interchangeable.
Note: Every vector AB

has three characteristics:


Length : The length of AB

will be denoted by | | AB

or AB.
Support : The line of unlimited length of which AB is a segment is
called the support of the vector AB

,
Sense : The sense of AB

is from A to B and that of BA

is from B to
A. Thus the sense of a directed line segment is from its initial
point to the terminal point.
Equality of vectors:
Two vectors a

and b

are said to be equal, written as a

= b

, if they
have the
(i) same magnitude (ii) same direction
41
In fig (2.2) AB || CD and AB = CD
AB

and CD

are in the same direction


Hence AB

= CD

or a

= b



Fig. 2. 2
2.2 Types of Vectors
Zero or Null Vector:
A vector whose initial and terminal points are coincident is called a zero or
null or a void vector. The zero vector is denoted by O


Vectors other than the null vector are called proper vectors.
Unit vector:
A vector whose modulus is unity, is called a unit vector.
The unit vector in the direction of a

is denoted by a
^
(read as a cap).
Thus | | a
^
= 1
The unit vectors parallel to a

are a
^


Result: a

= | a

| a
^
[i.e. any vector = (its modulus) (unit vector in that
direction)]
a
^
=
a

| | a

; ( ) a


In general unit vector in any direction =
vector in that direction
modulus of the vector

Like and unlike vectors:
Vectors are said to be like when they have the same sense of direction and
unlike when they have opposite directions.

like vectors

unlike vectors
Fig. 2. 3
42
Co-initial vectors:
Vectors having the same initial point are called co-initial vectors.
Co-terminus vectors:
Vectors having the same terminal point are called co-terminus vectors.
Collinear or Parallel vectors:
Vectors are said to be collinear or parallel if they have the same line of
action or have the lines of action parallel to one another.
Coplanar vectors:
Vectors are said to be coplanar if they are parallel to the same plane or they
lie in the same plane.
Negative vector:
The vector which has the same magnitude as that of a

but opposite
direction is called the negative of a

and is denoted by a

. Thus if AB

= a


then BA

= a

.
Reciprocal of a vector:
Let a

be a non-zero vector. The vector which has the same direction as


that of a

but has magnitude reciprocal to that of a

is called the reciprocal of


a

and is written as ( ) a
1
where

( ) a
1
=
1
a

Free and localised vector:
When we are at liberty to choose the origin of the vector at any point, then
it is said to be a free vector. But when it is restricted to a certain specified point,
then the vector is said to be localised vector.
2.3 Operations on vectors:
2.3.1 Addition of vectors:
Let OA

= a

, AB

= b

Join OB.
Then OB

represents the addition (sum) of the


vectors a

and b

.
This is written as OA

+ AB

= OB


Thus OB

= OA

+ AB

= a

+ b



Fig. 2. 4
43
This is known as the triangle law of addition of vectors which states that, if
two vectors are represented in magnitude and direction by the two sides of a
triangle taken in the same order, then their sum is represented by the third side
taken in the reverse order.
Applying the triangle law of addition of vectors in
ABC, we have
BC

+ CA

= BA


BC

+ CA

= AB


AB

+ BC

+ CA

= 0



Fig. 2. 5
Thus the sum of the vectors representing the sides of a triangle taken in
order is the null vector.
Parallelogram law of addition of vectors:
If two vectors a

and b

are represented in
magnitude and direction by the two adjacent sides
of a parallelogram, then their sum c

is
represented by the diagonal of the parallelogram
which is co-initial with the given vectors.
Symbolically we have OP

+ OQ

=OR



Fig. 2. 6
Thus if the vectors are represented by two adjacent sides of a
parallelogram, the diagonal of the parallelogram will represent the sum of the
vectors.
By repeated use of the triangle law we can find the sum of any number of
vectors.
Let OA

= a

, AB

= b

, BC

= c

, CD

= d

, DE

= e


be any five vectors as shown in the fig (2.7). We
observe from the figure that each new vector is
drawn from the terminal point of its previous one.
OA

+ AB

+ BC

+ CD

+ DE

= OE


Thus the line joining the initial point of the
first vector to the terminal point of the last vector is
the sum of all the vectors. This is called the polygon
law of addition of vectors.

Fig. 2. 7
44
Note : It should be noted that the magnitude of a

+ b

is not equal to the sum


of the magnitudes of a

and b

.
2.3.2 Subtraction of vectors:
If a

and b

are two vectors, then the subtraction of b

from a

is
defined as the vector sum of a

and b

and is denoted by a

.
a

= a

+ ( ) b


Let OA

= a

and AB

= b


Then OB

= OA

+ AB

= a

+ b


To subtract b

from a

, produce BA to B
such that AB = AB. AB

= AB

= b



Fig. 2. 8
Now by the triangle law of addition
OB

= OA

+ AB

= a

+ ( ) b

= a


Properties of addition of vectors:
Theorem 2.1:
Vector addition is commutative i.e., if a

and b

are any two vectors then


a

+ b

= b

+ a


Let OA

= a

, AB

= b


In OAB, OA

+ AB

= OB


(by triangle law of add.)

a

+ b

= OB

(1)
Complete the parallelogram OABC
CB

= OA

= a

; OC

= AB

= b



Fig. 2. 9
In OCB, we have OC

+ CB

= OB

i.e. b

+ a

= OB

(2)
From (1) and (2) we have a

+ b

= b

+ a


Vector addition is commutative.
45
Theorem 2.2:
Vector addition is associative
i.e. For any three vectors a

, b

, c


( ) a

+ b

+ c

= a

+ ( ) b

+ c


Proof :
Let OA

= a

; AB

= b

; BC

= c


Join O and B ; O and C ; A and C

Fig. 2. 10
In OAB, OA

+ AB

= OB

+ b

= OB

(1)
In OBC, OB

+ BC

= OC


( ) a

+ b

+ c

= OC

(2) [using (1)]


In ABC, AB

+ BC

= AC

+ c

= AC

(3)
In OAC OA

+ AC

= OC

+ ( ) b

+ c

= OC

(4) [using (3)]


From (2) and (4), we have ( ) a

+ b

+ c

= a

+ ( ) b

+ c


vector addition is associative.
Theorem 2.3:
For every vector a

, a

+ O

= O

+ a

= a

where O

is the null
vector. [existence of additive identity]
Proof:
Let OA

= a


Then a

+ O

= OA

+ AA

= OA

= a

+ O

= a


Also O

+ a

= OO

+ OA

= OA

= a


46
O

+ a

= a

+ O

= O

+ a

= a


Theorem 2.4:
For every vector a

, there corresponds a vector a

such that
a

+( ) a

= O

= ( ) a

+ a

[existence of additive inverse]


Proof: Let OA

= a

. Then AO

= a

+ ( ) a

= OA

+ AO

= OO

= O


( ) a

+ a

= AO

+ OA

= AA

= O


Hence a

+ ( ) a

= ( ) a

+ a

= O


2.3.3 Multiplication of a vector by a scalar
Let m be a scalar and a

be any vector, then m a

is defined as a vector
having the same support as that of a

such that its magnitude is | m | times the


magnitude of a

and its direction is same as or opposite to the direction of a


according as m is positive or negative.
Result : Two vectors a

and b

are collinear or parallel if and only if a

= m b


for some non-zero scalar m.
For any vector a

we define the following:


(1) a

= a

; ( 1) a

= a

; 0 a

= O


Note: If a

is a vector then 5 a

is a vector whose magnitude is 5 times the


magnitude of a

and whose direction is same as that of a

. But 5 a

is a
vector whose magnitude is 5 times the magnitude of a

and whose direction is


opposite to a

.
Properties of Multiplication of vectors by a scalar
The following are properties of multiplication of vectors by scalars.
For vectors a

, b

and scalars m, n we have


47
(i) m( ) a

= ( m) a

= ( ) m a

(ii) ( m) ( ) a

= m a


(iii) m( ) n a

= (mn) a

= n( ) m a

(iv) (m + n) a

= m a

+ n a


Theorem 2.5 (Without Proof) :
If a

and b

are any two vectors and m is a scalar


then m( ) a

+ b

= m a

+ m b

.
Result : m( ) a

= m a

m b


2.4 Position vector
If a point O is fixed as the origin in space
(or plane) and P is any point, then OP

is
called the position vector (P.V.) of P with
respect to O.
From the diagram OP

= r


Similarly OA

is called the position


vector (P.V.) of A with respect to O and OB


is the P.V. of B with respect to O.

Fig. 2. 11
Theorem 2.6: AB

= OB

OA

where OA

and OB

are the P.Vs of A and B


respectively.
Proof: Let O be the origin. Let a

and b

be the position vectors of points


A and B respectively
Then OA

= a

; OB

= b


In OAB, we have by triangle law of
addition
OA

+ AB

= OB


AB

= OB

OA

= b


i.e. AB

= (P.V of B) (P.V of A)

Fig. 2. 12
48
Note : In AB

, the point B is the head of the vector and A is the tail of the
vector.
AB

= (P.V. of the head) (P.V. of the tail). Similarly BA

= OA

OB


The above rule will be very much useful in doing problems.
Theorem 2.7: [Section Formula Internal Division]
Let A and B be two points with position vectors a

and b

respectively
and let P be a point dividing AB internally in the ratio m : n. Then the position
vector of P is given by
OP

=
n a

+ m b

m + n

Proof:
Let O be the origin.
Then OA

= a

; OB

= b



Fig. 2. 13
Let the position vector of P with respect to O be r

i.e. OP

= r


Let P divide AB internally in the ratio m : n
Then
AP
PB
=
m
n
n AP = m PB n AP

= m PB


n ( ) OP

OA

= m ( ) OB

OP

n ( ) r

= m ( ) b


n r

n a

= m b

m r

m r

+ n r

= m b

+ n a


(m + n) r

= m b

+ n a

=
m b

+ n a

m + n

Result (1): If P is the mid point of AB, then it divides AB in the ratio 1 : 1.
The P.V. of P is
1 . b

+ 1. a

1 + 1
=
a

+ b

2

49
P.V. of the mid point P of AB is OP

= r

=
a

+ b

2

Result (2): Condition that three points may be collinear
Proof: Assume that the points A, P and B (whose P.Vs are a

, r

and b


respectively) are collinear
We have r

=
m b

+ n a

m + n

(m + n) r

= m b

+ n a


(m + n) r

m b

n a

= 0
In this vector equation, sum of the scalar coefficients in the
L.H.S. = (m + n) m n = 0
Thus we have the result, if A, B, C are collinear points with position
vectors a

, b

, c

respectively then there exists scalars x, y, z such that


x a

+ y b

+ z c

= O

and x + y + z = 0
Conversely if the scalars x, y, z are such that x + y + z = 0 and
x a

+ y b

+ z c

= O

then the points with position vectors a

, b

and c


are collinear.
Result 3: [Section formula External division]
Let A and B be two points with position vectors a

and b

respectively
and let P be a point dividing AB externally in the ratio m : n. Then the position
vector of P is given by
OP

=
m b

n a

m n

Proof:
Let O be the origin. A and B are the two
points whose position vectors are a

and b


Then OA

= a

; OB

= b



Fig. 2. 14
Let P divide AB externally in the ratio m : n. Let the position vector of P
with respect to O be r

i.e. OP

= r


50
We have
AP
PB
=
m
n
n AP = m PB
n AP

= m PB

(
(
AP

& PB

are in the opposite direction



n ( ) OP

OA

= m ( ) OB

OP

n( ) r

= m( ) r


n r

n a

= m r

m b

m b

n a

= m r

n r


m b

n a

= (m n) r

=
m b

n a

m n

Theorem 2.8: The medians of a triangle are concurrent.
Proof:
Let ABC be a triangle and let D, E, F be the mid points of its sides BC, CA
and AB respectively. We have to prove that the medians AD, BE, CF are
concurrent.
Let O be the origin and a

, b

, c

be the position vectors of A, B, C


respectively.
The position vectors of D, E, F are

b

+ c

2
,
c

+ a

2
,
a

+ b

2

Let G
1
be the point on AD dividing it
internally in the ratio 2 : 1

Fig. 2. 15
P.V. of G
1
=
2OD

+ 1OA

2 + 1

OG
1

=
2
\

|
.
|
|
b

+ c

2
+ 1 a

3

=
a

+ b

+ c

3
(1)

Let G
2

be the point on BE dividing it internally in the ratio 2 : 1
OG
2

=
2 OE

+ 1OB

2 + 1

51
OG
2

=
2
\

|
.
|
|
c

+ a

2
+ 1. b

3

=
a

+ b

+ c

3
(2)
Similarly if G
3
divides CF in the ratio 2 : 1 then
OG
3


=
a

+ b

+ c

3
(3)
From (1), (2), (3) we find that the position vectors of the three points
G
1
, G
2
, G
3
are one and the same. Hence they are not different points. Let the
common point be denoted by G.
Therefore the three medians are concurrent and the point of
concurrence is G.
Result:
The point of intersection of the three medians of a triangle is called the
centroid of the triangle.
The position vector of the centroid G of ABC is OG

=
a

+ b

+ c

3


where a

, b

, c

are the position vectors of the vertices A, B, C respectively


and O is the origin of reference.
Example 2.1: If a

, b

, c

be the vectors represented by the three sides of a


triangle, taken in order, then prove that a

+ b

+ c

= O


Solution:
Let ABC be a triangle such that
BC

= a

, CA

= b

and AB

= c

+ b

+ c

= BC

+ CA

+ AB


= BA

+ AB

(BC

+ CA

= BA


= BB

= O



Fig. 2. 16
Example 2.2:
If a

and b

are the vectors determined by two adjacent sides of a regular


hexagon, find the vectors determined by the other sides taken in order.
52
Solution:
Let ABCDEF be a regular hexagon
such that AB

= a

and BC

= b


Since AD || BC such that AD = 2.BC
AD

= 2 BC

= 2 b


In ABC, we have AB

+ BC

= AC


AC

= a

+ b


In ACD, AD

= AC

+ CD



Fig. 2. 17
CD

= AD

AC

= 2 b

( ) a

+ b

= b


DE

= AB

= a


EF

= BC

= b


FA

= CD

= ( ) b

= a


Example 2.3:
The position vectors of the points A, B, C, D are a

, b

, 2 a

+ 3 b

,
a

2 b

respectively. Find DB

and AC


Solution: Given that
OA

= a

; OB

= b

; OC

= 2 a

+ 3 b

; OD

= a

2 b


DB

= OB

OD

= b

( ) a

2 b

= b

+ 2 b

= 3 b


AC

= OC

OA


= ( ) 2a

+ 3b


= a

+ 3 b


Example 2.4: Find the position vector of the points which divide the join of the
points A and B whose P.Vs are a

2 b

and 2 a

internally and
externally in the ratio 3 : 2
53
Solution:
OA

= a

2 b

; OB

= 2 a


Let P divide AB internally in the ratio 3 : 2
P.V. of P =
3OB

+ 2OA

3 + 2
=
3( ) 2 a

+ 2( ) a

2 b

5

=
6 a

3 b

+ 2 a

4 b

5
=
8 a

7 b

5
=
8
5
a


7
5
b


Let Q divide AB externally in the ratio 3 : 2
P.V. of Q =
3OB

2OA

3 2
=
3( ) 2 a

2( ) a

2 b

1

= 6 a

3 b

2 a

+ 4 b

= 4 a

+ b


Example 2.5: If a

and b

are position vectors of points A and B respectively,


then find the position vector of points of trisection of AB.
Solution:
Let P and Q be the points of
trisection of AB
Let AP = PQ = QB = (say)
P divides AB in the ratio 1 : 2


Fig. 2. 18
P.V. of P = OP

=
1. OB

+ 2. OA

1 + 2
=
1. b

+ 2. a

3
=
b

+ 2 a

3

Q is the mid-point of PB
P.V. of Q =
OP

+ OB

2
=
b

+ 2 a

3
+ b

2
=
b

+ 2 a

+ 3 b

3
2
=
2 a

+ 4 b

6

=
a

+ 2 b

3

Example 2.6: By using vectors, prove that a quadrilateral is a parallelogram if
and only if the diagonals bisect each other.
54
Solution:
Let ABCD be a quadrilateral
First we assume that ABCD is a parallelogram
To prove that its diagonals bisect each other
Let O be the origin of reference.
OA

= a

, OB

= b

, OC

= c

, OD

= d


Since ABCD is a parallelogram AB

= DC


Fig. 2. 19
OB

OA

= OC

OD

= c

+ d

= a

+ c

+ d

2
=
a

+ c

2

i.e. P.V. of the mid-point of BD = P.V. of the mid-point of AC. Thus, the
point, which bisects AC also, bisects BD. Hence the diagonals of a
parallelogram ABCD bisect each other.
Conversely suppose that ABCD is a quadrilateral such that its diagonals
bisect each other. To prove that it is a parallelogram.
Let a

, b

, c

, d

be the position vectors of its vertices A, B, C and D


respectively. Since diagonals AC and BD bisect each other.
P.V. of the mid-point of AC = P.V. of the mid-point of BD

a

+ c

2
=
b

+ d

2
a

+ c

= b

+ d

(1)
b

= c

i.e. AB

= DC


Also (1) d

= c

i.e. AD

= BC


Hence ABCD is a parallelogram.
Example 2.7:
In a triangle ABC if D and E are the midpoints of sides AB and AC
respectively, show that BE

+ DC

=
3
2
BC


55
Solution:
For convenience we choose A as the origin.
Let the position vectors of B and C be b

and
c

respectively. Since D and E are the


mid-points of AB and AC, the position vectors
of D and E are
b

2
and
c

2
respectively.

Fig. 2. 20
Now BE

= P.V. of E P.V. of B =
c

2
b


DC

= P.V. of C P.V. of D = c

2

BE

+ DC

=
c

2
b

+ c

2
=
3
2
c


3
2
b


=
3
2
( ) c

=
3
2
[P.V. of C P.V. of B]
=
3
2
BC


Example 2.8: Prove that the line segment joining the mid-points of two sides of
a triangle is parallel to the third side and equal to half of it.
Solution:
Let ABC be a triangle, and let O be the
origin of reference. Let D and E be the
midpoints of AB and AC respectively.
Let OA

= a

, OB

= b

, OC

= c


P.V. of D = OD

=
a

+ b

2


Fig. 2. 21
P.V. of E = OE

=
a

+ c

2

Now DE

= OE

OD

=
\

|
.
|
|
a

+ c

2

\

|
.
|
|
a

+ b

2

56
=
a

+ c

2
=
1
2
( ) c

=
1
2
( ) OC

OB

=
1
2
BC


DE

=
1
2
BC

DE || BC
Also DE

=
1
2
BC

| | DE

=
1
2
| | BC

DE =
1
2
BC
Hence DE || BC and DE =
1
2
BC.
Example 2.9: Using vector method, prove that the line segments joining the
mid-points of the adjacent sides of a quadrilateral taken in order form a
parallelogram.
Solution:
Let ABCD be a quadrilateral and let P, Q,
R, S be the mid-points of the sides AB, BC,
CD and DA respectively.
Then the position vectors of P, Q, R, S are

a

+ b

2
,
b

+ c

2
,
c

+ d

2
,
d

+ a

2

respectively.

Fig. 2. 22
In order to prove that PQRS is a parallelogram it is sufficient to show that
PQ

= SR

and PS

= QR


Now PQ

= P.V. of Q P.V. of P =
\

|
.
|
|
b

+ c

2

\

|
.
|
|
a

+ b

2
=
c

2

SR

= P.V. of R P.V. of S =
\

|
.
|
|
c

+ d

2

\

|
.
|
|
d

+ a

2
=
c

2

PQ

= SR


PQ || SR and PQ = SR
Similarly we can prove that PS = QR and PS || QR
Hence PQRS is a parallelogram.
Example 2.10 :
Let a

, b

, c

be the position vectors of three distinct points A, B, C. If


there exists scalars l, m, n (not all zero) such that l a

+m b

+n c

= 0 and l + m
+ n = 0 then show that A, B and C lie on a line.
57
Solution:
It is given that l, m, n are not all zero. So, let n be a non-zero scalar.
l a

+ m b

+ n c

= 0 n c

= ( ) l a

+ m b

=
( ) l a

+ m b

n
c

=
( ) l a

+ m b

(l + m)
=
l a

+ m b

l + m

The point C divides the line joining A and B in the ratio m : l
Hence A, B and C lies on the same line.
Note : a

, b

are collinear vectors a

= b

or b

= a

for some scalar


Collinear points: If A, B, C are three points in a plane such that AB

= BC


or AB

= AC

(or) BC

= AC

for some scalar , then A, B, C are


collinear.
Example 2.11: Show that the points with position vectors
a

2 b

+ 3 c

, 2 a

+ 3 b

and 4 a

7 b

+ 7 c

are collinear.
Solution:
Let A, B, C be the points with position vectors
a

2 b

+ 3 c

, 2 a

+ 3 b

and 4 a

7 b

+ 7 c

respectively.
OA

= a

2 b

+ 3 c

, OB

= 2 a

+ 3 b

, OC

= 4 a

7 b

+ 7 c


AB

= OB

OA

= ( ) 2 a

+ 3 b

( ) a

2 b

+ 3 c


= 2 a

+ 3 b

+ 2 b

3 c

= 3 a

+ 5 b

4 c


BC

= OC

OB

= ( ) 4 a

7 b

+ 7 c

( ) 2 a

+ 3 b


= 4 a

7 b

+ 7 c

+ 2 a

3 b

+ c

= 6 a

10 b

+ 8 c


Clearly BC

= 6 a

10 b

+ 8 c

= 2 ( ) 3 a

+5 b

4 c

= 2( ) AB


AB

and BC

are parallel vectors but B is a point common to them.


So AB

and BC

are collinear vectors. Hence A, B, C are collinear points.


58
EXERCISE 2.1
(1) If a

and b

represent two adjacent sides AB

and BC

respectively of
a paralleogram ABCD. Find the diagonals AC

and BD

.
(2) If PO

+ OQ

= QO

+ OR

, show that the points P, Q, R are collinear.


(3) Show that the points with position vectors
a

2 b

+ 3 c

, 2 a

+ 3 b

+ 2 c

and 8 a

+ 13 b

are collinear.
(4) Show that the points A, B, C with position vectors 2 a

+ 3 b

+ 5 c

,
a

+ 2 b

+ 3 c

and 7 a

respectively, are collinear.


(5) If D is the mid-point of the side BC of a triangle ABC, prove that
AB

+ AC

= 2AD


(6) If G is the centroid of a triangle ABC, prove that GA

+GB

+GC

= O


(7) If ABC and ABC are two triangles and G, G be their corresponding
centroids, prove that AA

+ BB

+ CC

= 3GG


(8) Prove that the sum of the vectors directed from the vertices to the
mid-points of opposite sides of a triangle is zero
(9) Prove by vector method that the line segment joining the mid-points of
the diagonals of a trapezium is parallel to the parallel sides and equal to
half of their difference.
(10) Prove by vector method that the internal bisectors of the angles of a
triangle are concurrent.
(11) Prove using vectors the mid-points of two opposite sides of a
quadrilateral and the mid-points of the diagonals are the vertices of a
parallelogram.
(12) If ABCD is a quadrilateral and E and F are the mid-points of AC and
BD respectively, prove that AB

+ AD

+ CB

+ CD

= 4 EF


2.5 Resolution of a Vector
Theorem 2.9 (Without Proof) :
Let a

and b

be two non-collinear vectors and r

be a vector coplanar
with them. Then r

can be expressed uniquely as r

= l a

+ m b

where l, m
are scalars.
59
Note : We call l a

+ m b

as a linear combination of vectors a

and b

, where
l, m are scalars.
Rectangular resolution of a vector in two dimension
Theorem 2.10 :
If P is a point in a two dimensional plane which has coordinates (x, y)
then OP

= x i

+ y j

, where i

and j

are unit vectors along OX and


OY respectively.
Proof:
Let P(x, y) be a point in a plane with
reference to OX and OY as
co-ordinate axes as shown in the
figure.
Draw PL perpendicular to OX.
Then OL = x and LP = y
Let i

, j

be the unit vectors along


OX and OY respectively.


Fig. 2. 23
Then OL

= x i

and LP

= y j


Vectors OL

and LP

are known as the components of OP

along x-axis
and y-axis respectively.
Now by triangle law of addition
OP

= OL

+ LP

= x i

+ y j

= r

(say)
r

= x i

+ y j


Now OP
2
= OL
2
+ LP
2
= x
2
+ y
2

OP = x
2
+ y
2
| | r

= x
2
+ y
2

Thus, if a point P in a plane has coordinates (x, y) then
(i) r

= OP

= x i

+ y j


(ii) | | r

= | | OP

= | | x i

+ y j

= x
2
+ y
2

(iii) The component of OP

along x-axis is a vector x i

and the
component of OP

along y-axis is a vector y j


60
Components of a vector AB

in terms of coordinates of A and B


Let A(x
1
, y
1
) and B(x
2
, y
2
) be any two
points in XOY plane. Let i

and j

be
unit vectors along OX and OY
respectively.
AN = x
2
x
1
, BN = y
2
y
1
AN

= (x
2
x
1
) i

, NB


= (y
2


y
1
) j


Now by triangle law of addition


Fig. 2. 24
AB

= AN

+ NB

= (x
2
x
1
) i

+ (y
2


y
1
) j


Component of AB

along x-axis = (x
2
x
1
) i


Component of AB

along y-axis = (y
2
y
1
) j


AB
2
= AN
2
+ NB
2
= (x
2
x
1
)
2
+ (y
2
y
1
)
2

AB = (x
2
x
1
)
2
+ (y
2
y
1
)
2

which gives the distance between A and B.
Addition, Subtraction, Multiplication of a vector by a scalar and equality
of vectors in terms of components:
Let a

= a
1
i

+ a
2
j

and b

= b
1
i

+ b
2
j


We define
(i) a

+ b

=
\
|
.
|
a
1
i

+ a
2
j

+
\
|
.
|
b
1
i

+ b
2
j

= (a
1
+ b
1
) i

+ (a
2
+ b
2
) j


(ii) a

=
\
|
.
|
a
1
i

+ a
2
j


\
|
.
|
b
1
i

+ b
2
j

= (a
1
b
1
) i

+ (a
2
b
2
) j


(iii) m a

= m
\
|
.
|
a
1
i

+ a
2
j

= ma
1
i

+ ma
2
j

where m is a scalar
(iv) a

= b

a
1
i

+ a
2
j

= b
1
i

+ b
2
j

a
1
= b
1
and a
2
= b
2

Example 2.12: Let O be the origin and P( 2, 4) be a point in the xy-plane.
Express OP

in terms of vectors i

and j

. Also find | | OP


61
Solution: The position vector of P, OP

= 2 i

+ 4 j


| | OP

= | | 2 i

+ 4 j

= ( 2)
2
+ (4)
2
= 4 + 16 = 20
= 2 5
Example 2.13: Find the components along the coordinates of the position
vector of P( 4, 3)
Solution:
The position vector of P = OP

= 4 i

+ 3 j


Component of OP

along x-axis is 4 i


i.e. component of OP

along x-axis is a vector of magnitude 4 and its


direction is along the negative direction of x-axis.
Component of OP

along y-axis is 3 j


i.e. the component of OP

along y axis is a vector of magnitude 3, having


its direction along the positive direction of y-axis.
Example 2.14: Express AB

in terms of unit vectors i

and j

, where the
points are A( 6, 3) and B( 2, 5). Find also | | AB


Solution:
Given OA

= 6 i

+ 3 j

; OB

= 2 i

5 j


AB

= OB

OA

= ( ) 2 i

5 j

( ) 6 i

+ 3 j


= 4 i

8 j


| | AB

= | | 4 i

8 j

= (4)
2
+ ( 8)
2
= 16 + 64 = 80
= 4 5
Theorem 2.11 (Without Proof) :
If a

, b

, c

are three given non-coplanar vectors then every vector r

in
space can be uniquely expressed as r

= l a

+ m b

+ n c

for some scalars l,


m and n
62
Rectangular Resolution of a vector in three dimension
Theorem 2.12:
If a point P in space has coordinate (x, y, z) then its position vector r

is
x i

+ y j

+ z k

and | | r

= x
2
+ y
2
+ z
2
where i

, j

, k

are unit vectors


along OX, OY and OZ respectively.
Proof:
OX, OY, OZ are three mutually
perpendicular axes. i

, j

, k

are unit
vectors along OX, OY, OZ respectively.
Let P be any point (x, y, z) in space and let
OP

= r


Draw PQ perpendicular to XOY
plane and QR perpendicular to OX
Then OR = x ; RQ = y ; QP = z
OR

= x i

; RQ

= y j

; QP

= z k



Fig. 2. 25
Now OP

= OQ

+ QP

= OR

+ RQ

+ QP


OP

= x i

+ y j

+ z k

= x i

+ y j

+ z k


Thus if P is a point (x, y, z) and r

is the position vector of P, then


r

= x i

+ y j

+ z k


From the right angled triangle OQP, OP
2
=OQ
2
+ QP
2

From the right angled triangle ORQ, OQ
2
=OR
2
+ RQ
2

OP
2
= OR
2
+ RQ
2
+ QP
2
OP
2
= x
2
+ y
2
+ z
2

OP = x
2
+ y
2
+ z
2
r = x
2
+ y
2
+ z
2

r = | | r

= x
2
+ y
2
+ z
2

2.6 Direction cosines and direction ratios
Let P(x, y, z) be any point in space with reference to a rectangular
coordinate system O (XYZ). Let , and be the angles made by OP with the
positive direction of coordinate axes OX, OY, OZ respectively. Then cos,
cos, cos are called the direction cosines of OP

.
63
In the fig 2.25 OQP = 90 ; POZ = OPQ = (QP || OZ)
cos =
PQ
OP
cos =
z
r
Similarly cos =
x
r
and cos =
y
r

The direction cosines of OP

are
x
r
,
y
r
,
z
r
where r = x
2
+ y
2
+ z
2

Result 1: Sum of the squares of direction cosines is unity.
cos
2
+ cos
2
+ cos
2
=
\
|
.
|
x
r
2
+
\
|
.
|
y
r
2
+
\
|
.
|
z
r
2
=
x
2
+ y
2
+ z
2
r
2

=
r
2
r
2
= 1 [ r
2
= x
2
+ y
2
+ z
2
]
cos
2
+ cos
2
+ cos
2
= 1
Result 2: Sum of the squares of direction sines is 2.
sin
2
+ sin
2
+ sin
2
= (1 cos
2
) + (1 cos
2
) + (1 cos
2
)
= 3 [cos
2
+ cos
2
+ cos
2
] = 3 1 = 2
sin
2
+ sin
2
+ sin
2
= 2
Direction ratios:
Any three numbers proportional to direction cosines of a vector are called
its direction ratios. (d. rs).
Let r

= x i

+ y j

+ z k

be any vector
Direction cosines of r

are
x
r
,
y
r
,
z
r
where r = x
2
+ y
2
+ z
2

cos =
x
r
; cos =
y
r
; cos =
z
r
where , , be the angles made
by r

with the coordinate axes OX, OY, OZ respectively



x
cos
= r ,
y
cos
= r,
z
cos
= r

x
cos
=
y
cos
=
z
cos
= r
x : y : z = cos : cos : cos
i.e. the coefficients of i, j, k in the rectangular resolution of a vector are
proportional to the direction cosines of that vector.
x, y, z are the direction ratios of the vector r

= x i

+ y l

+ z k


64
Addition, Subtraction and Multiplication of a vector by a scalar and
equality in terms of components:
Let a

= a
1
i

+ a
2
j

+ a
3
k

and b

= b
1
i

+ b
2
j

+ b
3
k

be any two
vectors.
Then
(i) a

+ b

=
( )
a
1
+ b
1
i

+
( )
a
2
+ b
2
j

+
( )
a
3
+ b
3
k


(ii) a

=
( )
a
1
b
1
i

+
( )
a
2
b
2
j

+
( )
a
3
b
3
k


(iii) m a

= m
\
|
.
|
a
1
i

+ a
2
j

+ a
3
k


= ma
1
i

+ ma
2
j

+ ma
3
k

where m is a scalar
(iv) a

= b

a
1
= b
1
, a
2
= b
2
and a
3
= b
3

Distance between two points:
Let A (x
1
, y
1
, z
1
) and B(x
2
, y
2
, z
2
) be any two points
Then AB

= OB

OA


=
\
|
.
|
x
2
i

+ y
2
j

+ z
2
k


\
|
.
|
x
1
i

+ y
1
j

+ z
1
k


= (x
2
x
1
) i

+ (y
2
y
1
) j

+ (z
2
z
1
) k


The distance between A and B is AB = | | AB


| | AB

(x
2
x
1
) i

+ (y
2
y
1
) j

+ (z
2
z
1
) k


= (x
2
x
1
)
2
+ (y
2
y
1
)
2
+ (z
2
z
1
)
2

Example 2.15: Find the magnitude and direction cosines of 2 i

+ 7 k


Solution:
Magnitude of 2 i

+ 7 k

= | | 2 i

+ 7 k

= (2)
2
+ ( 1)
2
+ (7)
2

= 4 + 1 + 49 = 54 = 3 6
Direction cosines of 2 i

+ 7 k

are
2
3 6

,

1
3 6

,

7
3 6

Example 2.16: Find the unit vector in the direction of 3 i

+ 4 j

12 k


65
Solution: Let a

= 3 i

+ 4 j

12 k


| | a

= | | 3 i

+ 4 j

12 k

= (3)
2
+ (4)
2
+ ( 12)
2

= 9 + 16 + 144 = 169 = 13
Unit vector in the direction of a

is a
^
=
a

| | a

=
3 i

+ 4 j

12 k

13

Example 2.17: Find the sum of the vectors i

+ 2 k

and 2 i

+ 3 j

4 k


and also find the modulus of the sum.
Solution:
Let a

= i

+ 2 k

, b

= 2 i

+ 3 j

4 k

+ b

= ( ) i

+ 2 k

+ ( ) 2 i

+ 3 j

4 k

= 3 i

+ 2 j

2 k


| | a

+ b

= 3
2
+ 2
2
+ ( 2)
2
= 9 + 4 + 4
= 17
Example 2.18: If the position vectors of the two points A and B
are i

+ 2 j

3 k

and 2 i

4 j

+ k

respectively then find | | AB


Solution:
If O be the origin, then OA

= i

+ 2 j

3 k

, OB

= 2 i

4 j

+ k


AB

= OB

OA


= ( ) 2 i

4 j

+ k

( ) i

+ 2 j

3 k


= i

6 j

+ 4 k


| | AB

= (1)
2
+ ( 6)
2
+ (4)
2
= 53
Example 2.19: Find the unit vectors parallel to the vector 3 i

+ 4 j


Solution: Let a

= 3 i

+ 4 j


| | a

= ( 3)
2
+ 4
2
= 9 + 16 = 5
66
a
^
=
a

| | a

=
1
| | a

=
1
5
( ) 3 i

+ 4 j


Unit vectors parallel to a

are a
^
=
\
|
.
|
3
5
i

+
4
5
j


Example 2.20: Find the vectors of magnitude 5 units, which are parallel to the
vector 2 i


Solution: Let a

= 2 i


| | a

= 2
2
+ ( 1)
2
= 5
a
^
=
a

| | a

=
1
5
( ) 2 i

=
2
5
i


1
5
j


Vectors of magnitude 5 parallel to 2 i

= 5 a
^

= 5
\

|
.
|
|
2
5
i


1
5
j

= ( ) 2 5 i

5 j


Example 2.21: Show that the points whose position vectors 2 i

+ 3 j

5 k

,
3 i

+ j

2 k

and 6 i

5 j

+ 7 k

are collinear.
Solution: Let the points be A, B and C and O be the origin. Then
OA

= 2 i

+ 3 j

5 k

; OB

= 3 i

+ j

2 k

; OC

= 6 i

5 j

+ 7 k


AB

= OB

OA

= ( ) 3 i

+ j

2 k

( ) 2 i

+ 3 j

5 k


= i

2 j

+ 3 k


AC

= OC

OA

= ( ) 6 i

5 j

+ 7 k

( ) 2 i

+ 3 j

5 k


AC

= 4 i

8 j

+ 12 k

= 4 ( ) i

2 j

+ 3 k


= 4 AB


Hence the vectors AB

and AC

are parallel. Further they have the


common point A.
The points A, B, C are collinear.
67
Example 2.22: If the position vectors of A and B are 3 i

7 j

7 k

and
5 i

+4 j

+3 k

, find AB

and determine its magnitude and direction cosines.


Solution:
Let O be the origin. Then
OA

= 3 i

7 j

7 k

, OB

= 5 i

+ 4 j

+ 3 k


AB

= OB

OA

= ( ) 5 i

+ 4 j

+ 3 k

( ) 3 i

7 j

7 k


AB

= 2 i

+ 11 j

+ 10 k


| | AB

= (2)
2
+ (11)
2
+ (10)
2
= 15
The direction cosines are
2
15
,
11
15
,
10
15

EXERCISE 2.2
(1) Find the sum of the vectors 4 i

+ 5 j

+ k

, 2 i

+ 4 j

and
3 i

4 j

+ 5 k

. Find also the magnitude of the sum.


(2) If a

= 3 i

4 k

, b

= 2 i

+ 4 j

3 k

and c

= i

+ 2 j


find | | 2 a

+ 3 c


(3) The position vectors of the vertices A, B, C of a triangle ABC are
respectively
2 i

+ 3 j

+ 4 k

, i

+ 2 j

and 3 i

5 j

+ 6 k


Find the vectors determined by the sides and calculate the length of the
sides.
(4) Show that the points whose position vectors given by
(i) 2 i

+ 3 j

+ 5 k

, i

+ 2 j

+ 3 k

, 7 i


(ii) i

2 j

+ 3 k

, 2 i

+ 3 j

4 k

and 7 j

+ 10 k

are collinear.
(5) If the vectors a

= 2 i

3 j

and b

= 6 i

+ m j

are collinear, find the


value of m.
(6) Find a unit vector in the direction of i

+ 3 j


68
(7) Find the unit vectors parallel to the sum of 3 i

5 j

+ 8 k


and 2 j

2 k


(8) Find the unit vectors parallel to 3 a

2 b

+ 4 c

where a

=3 i

4 k

,
b

= 2 i

+ 4 j

3 k

, c

= i

+ 2 j


(9) The vertices of a triangle

have position vectors
4 i

+ 5 j

+ 6 k

, 5 i

+ 6 j

+ 4 k

, 6 i

+ 4 j

+ 5 k

. Prove that the


triangle is equilateral.
(10) Show that the vectors 2 i

+ k

, 3 i

4 j

4 k

, i

3 j

5 k


form a right angled triangle.
(11) Prove that the points 2 i

+ 3 j

+ 4 k

, 3 i

+ 4 j

+ 2 k

, 4 i

+2 j

+ 3 k


form an equilateral triangle.
(12) If the vertices of a triangle have position vectors i

+ 2 j

+ 3 k

,
2 i

+ 3 j

+ k

and 3 i

+ j

+ 2 k

, find the position vector of its


centroid.
(13) If the position vectors of P and Q are i

+ 3 j

7 k


and 5 i

2 j

+ 4 k

, find PQ

and determine its direction cosines.


(14) Show that the following vectors are coplanar
(i) i

2 j

+ 3 k

, 2 i

+ 3 j

4 k

, j

+ 2 k


(ii) 5 i

+ 6 j

+ 7 k

, 7 i

8 j

+ 9 k

, 3 i

+ 20 j

+ 5 k


(15) Show that the points given by the vectors 4 i

+ 5 j

+ k

, j

,
3 i

+ 9 j

+ 4 k

and 4 i

+ 4 j

+ 4 k

are coplanar.
(16) Examine whether the vectors i

+ 3 j

+ k

, 2 i


and 7 j

+ 5 k

are coplanar.

69
3. ALGEBRA
3.1 Partial Fractions:
Definitions:
Rational Expression: An expression of the form
p(x)
q(x)
where p(x) and
q(x) 0 are polynomials in x is called a rational expression.
The expressions
5x 2
x
2
+ 3x + 2
,
3x
2
+ 2x-1
x
2
+ x 22
are examples for rational
expressions.
Proper Fraction: A proper fraction is one in which the degree of the
numerator is less than the degree of the denominator.
The expressions
3x + 1
x
2
+ 4x +3
,
7x
2
+ 9
x
3
+ x
2
5
are examples for proper
fractions.
Improper Fraction: An improper fraction is a fraction in which the degree of
the numerator is greater than or equal to the degree of the denominator.
The expressions
x
3
+ 5x
2
+ 4
x
2
+ 2x + 3
,
x
2
x + 1
x
2
+ x + 3
are examples for improper
fractions.
Partial Fraction:
Consider the sum of
7
x 2
and
5
x 1

We simplify it as follows:

7
x 2
+
5
x 1
=
7(x 1) + 5(x 2)
(x 2) (x 1)
=
7x 7 + 5x 10
(x 2) (x 1)
=
12x 17
(x 2) (x 1)

Conversely the process of writing the given fraction
12x 17
(x 2) (x 1)
as
7
x 2
+
5
x 1
is known as splitting into partial fractions (or) expressing as
partial fractions.
A given proper fraction can be expressed as the sum of other simple
fractions corresponding to the factors of the denominator of the given proper
fraction. This process is called splitting into Partial Fractions. If the given
fraction
p(x)
q(x)
is improper then convert into sum of a polynomial expression and
a proper rational fraction by dividing p(x) by q(x).
70
Working Rule :
Given the proper fraction
p(x)
q(x)
. Factorise q(x) into prime factors.
Type 1: Linear factors, none of which is repeated.
If a linear factor ax + b is a factor of the denominator q(x) then
corresponding to this factor associate a simple fraction
A
ax + b
, where A is a
constant (A 0).
i.e., When the factors of the denominator of the given fraction are all linear
factors none of which is repeated, we write the partial fraction as follows :

x + 3
(x + 5) (2x + 1)
=
A
x + 5
+
B
2x + 1
where A and B are constants to
be determined.
Example 3.1: Resolve into partial fractions
3x + 7
x
2
3x + 2

The denominator x
2
3x + 2 can be factorised into linear factors.
x
2
3x + 2 = x
2
x 2x + 2 = x (x 1) 2 (x 1) = (x 1) (x 2)
We assume
3x + 7
x
2
3x + 2
=
A
x 1
+
B
x 2
where A and B are constants.

3x + 7
x
2
3x + 2
=
A(x 2) + B(x 1)
(x 1) (x 2)

3x + 7 = A(x 2) + B(x 1) (1)
Equating the coefficients of like powers of x, we get
Coefficient of x : A + B = 3 (2)
Constant term : 2A B = 7 (3)
Solving (2) and (3) we get
A = 10
B = 13

3x + 7
x
2
3x + 2
=
10
x 1
+
13
x 2
=
13
x 2

10
x 1

Note: The constants A and B can also be found by successively giving suitable
values for x.
To find A, put x = 1 in (1)
3(1) + 7 = A(1 2) + B(0)
10 = A ( 1)
A = 10
71
To find B, put x = 2 in (1)
3(2) + 7 = A(0) + B(2 1)
B = 13

3x + 7
x
2
3x + 2
=
10
x 1
+
13
x 2


3x + 7
x
2
3x + 2
=
13
x 2

10
x 1

Example: 3.2: Resolve into partial fractions
x + 4
(x
2
4) (x + 1)

The denominator (x
2
4) (x + 1) can be further factored into linear factors
i.e. (x
2
4) (x + 1) = (x + 2) (x 2) (x + 1)
Let
x + 4
(x
2
4) (x + 1)
=
A
x + 2
+
B
x 2
+
C
x + 1
, where A, B and C are
constants to be determined.

x + 4
(x
2
4) (x + 1)
=
A(x 2) (x + 1) + B(x + 2) (x + 1) + C(x + 2) (x 2)
(x + 2) (x 2) (x + 1)

x + 4 = A(x 2) (x +1) + B(x + 2) (x + 1) + C(x + 2) (x 2) (1)
To find A, put x = 2 in (1)
2 + 4 = A ( 2 2) ( 2 + 1) + B(0) + C(0)
2 = 4A A = 1/2
To find B, put x = 2 in (1), we get B = 1/2
To find C, put x = 1 in (1), we get C = 1

x + 4
(x
2
4) (x+ 1)
=
1/2
(x + 2)
+
1/2
(x 2)
+
( 1)
x + 1


x + 4
(x
2
4) (x+ 1)
=
1
2(x + 2)
+
1
2(x 2)

1
x + 1

Type 2: Linear factors, some of which are repeated
If a linear factor ax + b occurs n times as a factor of the denominator of the
given fraction, then corresponding to these factors associate the sum of n simple
fractions,

A
1
ax + b
+
A
2
(ax + b)
2
+
A
3
(ax + b)
3
+ +
A
n
(ax + b)
n

Where A
1
, A
2
, A
3
, A
n
are constants.
72
Example 3.3: Resolve into partial fractions
9
(x 1) (x + 2)
2

Let
9
(x 1) (x + 2)
2
=
A
x 1
+
B
x + 2
+
C
(x + 2)
2


9
(x 1) (x + 2)
2
=
A(x + 2)
2
+ B(x 1) (x + 2) + C(x 1)
(x 1) (x + 2)
2

9 = A(x + 2)
2
+ B(x 1) (x + 2) + C(x 1) (1)
To find A, put x = 1 in (1)
We get 9 = A (1 + 2)
2
A = 1
To find C, put x = 2 in (1)
We get 9 = C ( 2 1) C = 3
In (1), equating the coefficient of x
2
on both sides we get
A + B = 0
1 + B = 0 B = 1

9
(x 1) (x + 2)
2
=
1
x 1

1
x + 2

3
(x + 2)
2

Type 3: Quadratic factors, none of which is repeated
If a quadratic factor ax
2
+ bx + c which is not factorable into linear factors
occurs only once as a factor of the denominator of the given fraction, then
corresponding to this factor associate a partial fraction
Ax + B
ax
2
+ bx + c
where A
and B are constants which are not both zeros.
Consider
2x
(x + 1) (x
2
+ 1)

We can write this proper fraction in the form
2x
(x + 1) (x
2
+ 1)
=
A
x + 1
+
Bx + C
x
2
+ 1

The first factor of the denominator x + 1 is of first degree, so we assume its
numerator as a constant A. The second factor of the denominator x
2
+1 is of 2
nd

degree and which is not factorable into linear factors. We assume its numerator
as a general first-degree expression Bx + C.
Example 3.4: Resolve into partial fractions
x
2
2x 9
(x
2
+ x + 6) (x + 1)

73
Let
x
2
2x 9
(x
2
+ x + 6) (x + 1)
=
Ax + B
x
2
+ x + 6
+
C
x + 1


x
2
2x 9
(x
2
+ x + 6) (x + 1)
=
(Ax + B) (x + 1) + C(x
2
+ x + 6)
(x
2
+ x + 6) (x + 1)

x
2
2x 9 = (Ax + B) (x + 1) + C(x
2
+ x + 6) (1)
To find C put x = 1 in (1)
We get 1 + 2 9 = C(1 1 + 6) C = 1
To find B, put x = 0 in (1)
We get 9 = B + 6C
9 = B 6 B = 3
To find A, Put x = 1 in (1)
1 2 9 = (A 3) (2) + ( 1) (8) 10 = 2A 14
A = 2

x
2
2x 9
(x
2
+ x + 6) (x + 1)
=
2x 3
x
2
+ x + 6

1
x + 1

Example 3.5: Resolve into partial fractions
x
2
+ x + 1
x
2
5x + 6

Solution:
Here the degree of the numerator is same as the degree of the denominator,
i.e. an improper fraction.
On division
x
2
+ x + 1
x
2
5x + 6
= 1 +
6x 5
x
2
5x + 6
(1)
Let
6x 5
x
2
5x + 6
=
A
x 2
+
B
x 3

6x 5 = A(x 3) + B(x 2)
By putting x = 2, A = 12 5 A = 7
By putting x = 3, B = 18 5 B = 13

x
2
+ x + 1
x
2
5x + 6
=
7
x 2
+
13
x 3

(1)
x
2
+ x + 1
x
2
5x + 6
= 1
7
x 2
+
13
x 3

74
EXERCISE 3.1
Resolve into partial fractions
(1)
1
(x 1) (x + 1)
(2)
7x 1
6 5x + x
2
(3)
x
2
+ x + 1
(x 1) (x 2) (x 3)

(4)
1
(x 1) (x + 2)
2
(5)
x 2
(x + 2) (x 1)
2
(6)
x + 1
(x 2)
2
(x + 3)

(7)
x
2
6x + 2
x
2
(x + 2)
(8)
2x
2
5x 7
(x 2)
3
(9)
x
2
3
(x + 2) (x
2
+ 1)

(10)
x + 2
(x + 1) (x
2
+ 1)
(11)
7x
2
25x + 6
(x
2
2x 1) (3x 2)
(12)
x
2
+ x + 1
x
2
+ 2x +1

3.2 Permutations:
Factorial:
The continued product of first n natural numbers is called the
n factorial and is denoted by n! or n
i.e. n! = 1 2 3 4 (n 1) n
5 ! = 1 2 3 4 5 = 120
Zero Factorial:
We will require zero factorial in the latter sections of this chapter. It does
not make any sense to define it as the product of the integers from 1 to zero. So,
we define 0! = 1.
Deduction:
n ! = 1 2 3 4 (n 1) n
= [1 2 3 4 (n 1)]n
= [ ] (n 1)! n
Thus, n! = n [ ] (n 1)!
For example,
8 ! = 8(7 !)
3.2.1 Fundamental Principles of Counting:
In this section we shall discuss two fundamental principles viz., principle
of addition and principle of multiplication. These two principles will enable us
to understand permutations and combinations and form the base for
permutations and combinations.
75
Fundamental Principle of Multiplication:
If there are two jobs such that one of them can be completed in m ways,
and when it has been completed in any one of these m ways, second job can be
completed in n ways; then the two jobs in succession can be completed in
m n ways.
Explanation:
If the first job is performed in any one of the m ways, we can associate
with this any one of the n ways of performing the second job: and thus there are
n ways of performing the two jobs without considering more than one way of
performing the first; and so corresponding to each of the m ways of performing
the first job, we have n ways of performing the second job. Hence, the number
of ways in which the two jobs can be performed is m n.
Example 3.6: In a class there are 15 boys and 20 girls. The teacher wants to
select a boy and a girl to represent the class in a function. In how many ways
can the teacher make this selection?
Solution :
Here the teacher is to perform two jobs :
(i) Selecting a boy among 15 boys, and
(ii) Selecting a girl among 20 girls
The first of these can be performed in 15 ways and the second in 20 ways.
Therefore by the fundamental principle of multiplication, the required
number of ways is 15 20 = 300.

Fundamental Principle of Addition:
If there are two jobs such that they can be performed independently in
m and n ways respectively, then either of the two jobs can be performed in
(m + n) ways.
Example 3.7: In a class there are 20 boys and 10 girls. The teacher wants to
select either a boy or a girl to represent the class in a function. In how many
ways can the teacher make this selection?
Solution:
Here the teacher is to perform either of the following two jobs :
(i) selecting a boy among 20 boys. (or)
(ii) Selecting a girl among 10 girls
The first of these can be performed in 20 ways and the second in 10 ways.
Therefore, by fundamental principle of addition either of the two jobs can
be performed in (20 + 10) = 30 ways.
76
Hence, the teacher can make the selection of either a boy or a girl in 30
ways.
Example 3.8: A room has 10 doors. In how many ways can a man enter the
room through one door and come out through a different door?
Solution:
Clearly, a person can enter the room through any one of the ten doors. So,
there are ten ways of entering into the room.
After entering into the room, the man can come out through any one of
the remaining 9 doors. So, he can come out through a different door in 9 ways.
Hence, the number of ways in which a man can enter a room through one
door and come out through a different door = 10 9 = 90.
Example 3.9: How many words (with or without meaning) of three distinct
letters of the English alphabets are there?
Solution:
Here we have to fill up three places by distinct letters of the English
alphabets. Since there are 26 letters of the English alphabet, the first place can
be filled by any of these letters. So, there are 26 ways of filling up the first
place.
Now, the second place can be filled up by any of the remaining 25 letters.
So, there are 25 ways of filling up the second place.
After filling up the first two places only 24 letters are left to fill up the
third place. So, the third place can be filled in 24 ways.
Hence, the required number of words
= 26 25 24 = 15600
Example 3.10:
How many three-digit numbers can be formed by using the digits 1, 2, 3, 4, 5.
Solution :
We have to determine the total number of three digit numbers formed by
using the digits 1, 2, 3, 4, 5.
Clearly, the repetition of digits is allowed.
A three digit number has three places viz. units, tens and hundreds. Units
place can be filled by any of the digits 1, 2, 3, 4, 5. So units place can be filled
in 5 ways.
Similarly, each one of the tens and hundreds place can be filled in 5 ways.
Total number of required numbers
= 5 5 5 = 125
77
Example 3.11: There are 6 multiple choice questions in an examination. How
many sequences of answers are possible, if the first three questions have
4 choices each and the next three have 5 each?
Solution:
Here we have to perform 6 jobs of answering 6 multiple choice questions.
Each of the first three questions can be answered in 4 ways and each one of
the next three can be answered in 5 different ways.
So, the total number of different sequences
= 4 4 4 5 5 5 = 8000
Example 3.12: How many three-digit numbers greater than 600 can be formed
by using the digits 4, 5, 6, 7, 8?
Solution:
Clearly, repetition of digits is allowed. Since a three-digit number greater
than 600 will have 6, 7 or 8 at hundreds place. So, hundreds place can be
filled in 3 ways.
Each of the tens and ones place can be filled in 5 ways.
Hence, total number of required numbers
= 3 5 5 = 75
Example 3.13: How many numbers divisible by 5 and lying between 5000 and
6000 can be formed from the digits 5, 6, 7, 8 and 9?
Solution:
Clearly, a number between 5000 and 6000 must have 5 at thousands place.
Since the number is divisible by 5 it must have 5 at units place.
Now, each of the remaining places (viz. Hundreds and tens) can be filled in
5 ways.
Hence the total number of required numbers
= 1 5 5 1 = 25
Example 3.14: How many three digit odd numbers can be formed by using the
digits 4, 5, 6, 7, 8, 9 if :
(i) the repetition of digits is not allowed?
(ii) the repetition of digits is allowed?
Solution:
For a number to be odd, we must have 5, 7 or 9 at the units place.
So, there are 3 ways of filling the units place.
(i) Since the repetition of digits is not allowed, the tens place can be filled
with any of the remaining 5 digits in 5 ways.
Now, four digits are left. So, hundreds place can be filled in 4 ways.
78
So, required number of numbers
= 3 5 4 = 60
(ii) Since the repetition of digits is allowed, so each of the tens and
hundreds place can be filled in 6 ways.
Hence required number of numbers = 3 6 6 = 108
EXERCISE 3.2
1. In a class there are 27 boys and 14 girls. The teacher wants to select
1 boy and 1 girl to represent a competition. In how many ways can
the teacher make this selection?
2. Given 7 flags of different colours, how many different signals can be
generated if a signal requires the use of two flags, one below the
other?
3. A person wants to buy one fountain pen, one ball pen and one pencil
from a stationery shop. If there are 10 fountain pen varieties, 12 ball
pen varieties and 5 pencil varieties, in how many ways can he select
these articles?
4. Twelve students compete in a race. In how many ways first three
prizes be given?
5. From among the 36 teachers in a college, one principal, one vice-
principal and the teacher-in charge are to be appointed. In how many
ways this can be done?
6. There are 6 multiple choice questions in an examination. How many
sequences of answers are possible, if the first three questions have 4
choices each and the next three have 2 each?
7. How many numbers are there between 500 and 1000 which have
exactly one of their digits as 8?
8. How many five-digit number license plates can be made if
(i) first digit cannot be zero and the repetition of digits is not
allowed.
(ii) the first digit cannot be zero, but the repetition of digits is
allowed?
9. How many different numbers of six digits can be formed from the
digits 2, 3, 0, 7, 9, 5 when repetition of digits is not allowed?
10. How many odd numbers less than 1000 can be formed by using the
digits 0, 3, 5, 7 when repetition of digits is not allowed?
11. In how many ways can an examinee answer a set of 5 true / false
type questions?
79
12. How many 4-digit numbers are there?
13. How many three letter words can be formed using a, b, c, d, e if :
(i) repetition is allowed (ii) repetition is not allowed?
14. A coin is tossed five times and outcomes are recorded. How many
possible outcomes are there?
3.2.2. Concept of Permutations:
The word permutation means arrangement.
For example, given 3 letters a, b, c suppose we arrange them taking 2 at a
time.
The various arrangements are ab, ba, bc, cb, ac, ca.
Hence the number of arrangements of 3 things taken 2 at a time is 6 and this
can be written as 3P2 = 6.
Definition:
The number of arrangements that can be made out of n things taking r at a
time is called the number of permutations of n things taken r at a time.
Notation:
If n and r are positive integers such that 1 r n, then the number of all
permutations of n distinct things, taken r at a time is denoted by the symbol P(n,
r) or nPr.
We use the symbol nPr throughout our discussion. Thus nPr = Total number
of permutations of n distinct things taken r at a time.
Note: In permutations the order of arrangement is taken into account; when the
order is changed, a different permutation is obtained.
Example 3.15: Write down all the permutations of the vowels A, E, I, O, U in
English alphabets taking 3 at a time and starting with E.
Solution: The permutations of vowels A, E, I, O, U taking three at a time and
starting with E are
EAI, EIA, EIO, EOI, EOU, EUO, EAO, EOA, EIU, EUI, EAU, EUA.
Clearly there are 12 permutations.
Theorem 3.1:
Let r and n be positive integers such that 1 r n.
Then the number of all permutations of n distinct things taken r at a time is
given by n(n 1) (n 2) ( ) n r 1


i.e. nPr = n(n 1) (n 2) ( ) n r 1


80
Proof:
Let nPr denote the number of permutations of n things taken r at a time.
Clearly the total number of permutations required is same as the number of
possible ways of filling up r blank spaces by n things.

1 2 3 r
Let there be r blank spaces arranged in a row
The first place can be filled by any one of the n things in n ways.
If the first place is filled up by any one of the n things, there will be
(n 1) things remaining. Now the second place can be filled up by any one of
the (n 1) remaining things.
Here it can be filled up in (n 1) ways.
Hence the first two places can be together filled in n(n 1) ways.
Having filled up these two places, we have (n 2) things remaining with
which we can fill up the third place. So the third place can be filled up by any
one of these things in (n 2) ways.
Hence the first three places can be together filled in n(n 1) (n 2) ways.
Proceeding in this way, we find that the total number of ways of filling up
the r spaces is
n(n 1) (n 2) upto r factors
i.e. n(n 1) (n 2) ( ) n r 1


nPr = n(n 1) (n 2) ( ) n r 1

= n(n 1) (n 2) (n r + 1)
Theorem 3.2:
Let r and n be positive integers such that 1 r n. Then nPr =
n!
(n r)!

Proof:
nPr = n(n 1) (n 2) ( ) n r 1


=
n(n 1) (n 2) ( ) n r 1

(n r) ( ) n r +1

2.1
(n r) ( ) n r +1

2.1

=
n!
(n r)!

81
Theorem 3.3:
The number of all permutations of n distinct things, taken all at a time is n!
Proof: nPr = n(n 1) (n 2) ( ) n r 1


By putting r = n, nPn

= n(n 1) (n 2) ( ) n n 1


= n(n 1) (n 2) ( ) n n 1


= n(n 1) (n 2) 1
= n!
nPn

= n!
Remark: We have already defined 0! = 1. This can also be derived as follows.
We know that nPr =
n!
(n r)!

By putting r = n, nPn =
n!
(n n)!

n! =
n!
0!
(Q nPn

= n!)
0! =
n!
n!
= 1
0! = 1
Example 3.16: Evaluate 8P
3

Solution: 8P
3
=
8!
(8 3)!
=
8!
5!
=
(8 7 6) 5!
5!

= 8 7 6
= 336
Example 3.17 : If 5Pr = 6P
r1
, find r
Solution: 5Pr = 6P
r1


5!
(5 r)!
=
6!
( ) 6 r 1

!


5!
(5 r)!
=
6 5!
(7 r)!


5!
(5 r)!
=
6 5!
{(7 r) (6 r)} (5 r)!

1 =
6
(7 r) (6 r)

82
(7 r) (6 r) = 6 42 7r 6r + r
2
6 = 0
r
2
13r + 36 = 0 (r 9) (r 4) = 0
r = 9 or r = 4
r = 4 (Q 5Pr is meaningful for r 5)
Example 3.18:
If nP
4
= 360, find the value of n.
Solution: nP
4
= 360
n !
(n 4) !
= 6 5 4 3

n !
(n 4) !
=
6 5 4 3 2!
2!
=
6!
2!

n! = 6!
n = 6
Example 3.19:
If 9Pr = 3024, find r.
Solution: 9Pr = 3024
= 9 8 7 6 = 9P
4

r = 4
Example 3.20:
If (n 1)P
3
: nP
4
= 1 : 9, find n.
Solution:
(n 1)P
3
: nP
4
= 1 : 9
(n 1) (n 2) (n 3) : n(n 1) (n 2) (n 3) = 1 : 9
i.e. 9(n 1) (n 2) (n 3) = n(n 1) (n 2) (n 3)
n = 9
Example 3.21: In how many ways can five children stand in a queue?
Solution:
The number of ways in which 5 persons can stand in a queue is same as the
number of arrangements of 5 different things taken all at a time.
Hence the required number of ways
=
5
P
5
= 5! = 120
Example 3.22: How many different signals can be made by hoisting 6
differently coloured flags one above the other, when any number of them may
be hoisted at one time?
83
Solution:
The signals can be made by using at a time one or two or three or four or
five or six flags.
The total number of signals when r-flags are used at a time from 6 flags is
equal to the number of arrangements of 6, taking r at a time i.e. 6P
r
Hence, by the fundamental principle of addition, the total number of
different signals
=
6
P
1
+
6
P
2
+
6
P
3
+
6
P
4
+
6
P
5
+
6
P
6
= 6 + (6 5) + (6 5 4) + (6 5 4 3) + (6 5 4 3 2)
+ (6 5 4 3 2 1)
= 6 + 30 + 120 + 360 + 720 + 720 = 1956
Example 3.23: Find the number of different 4-letter words with or without
meanings, that can be formed from the letters of the word NUMBER
Solution:
There are 6 letters in the word NUMBER.
So, the number of 4-letter words
= the number of arrangements of 6 letters taken 4 at a time
=
6
P
4

= 360
Example 3.24: A family of 4 brothers and 3 sisters is to be arranged in a row,
for a photograph. In how many ways can they be seated, if
(i) all the sisters sit together.
(ii) all the sisters are not together.
Solution :
(i) Since the 3 sisters are inseparable, consider them as one single unit.
This together with the 4 brothers make 5 persons who can be arranged
among themselves in 5! ways.
In everyone of these permutations, the 3 sisters can be rearranged among
themselves in 3! ways.
Hence the total number of arrangements required = 5! 3! = 120 6 = 720
(ii) The number of arrangements of all the 7 persons without any restriction
=7! = 5040
Number of arrangements in which all the sisters sit together = 720
Number of arrangements required = 5040 720 = 4320
84
3.2.3 Permutations of objects not all distinct:
The number of mutually distinguishable permutations of n things, taken all
at a time, of which p are alike of one kind, q alike of second such that p + q = n,
is
n!
p! q!

Example 3.25: How many permutations of the letters of the word APPLE are
there?
Solution:
Here there are 5 letters, two of which are of the same kind.
The others are each of its own kind.
Required number of permutations is =
5!
2! 1! 1! 1!
=
5!
2!
=
120
2
= 60
Example 3.26: How many numbers can be formed with the digits 1, 2, 3, 4, 3,
2, 1 so that the odd digits always occupy the odd places?
Solution:
There are 4 odd digits 1, 1, 3, 3 and 4 odd places.
So odd digits can be arranged in odd places in
4!
2! 2!
ways.
The remaining 3 even digits 2, 2, 4 can be arranged in 3 even places in
3!
2!

ways.
Hence, the required number of numbers =
4!
2! 2!

3!
2!
= 6 3 = 18
Example 3.27: How many arrangements can be made with the letters of the
word MATHEMATICS?
Solution:
There are 11 letters in the word MATHEMATICS of which two are Ms,
two are As, two are Ts and all other are distinct.
required number of arrangements =
11!
2! 2! 2!
= 4989600
3.2.4 Permutations when objects can repeat:
The number of permutations of n different things, taken r at a time, when
each may be repeated any number of times in each arrangement, is n
r

Consider the following example:
In how many ways can 2 different balls be distributed among 3 boxes?
Let A and B be the 2 balls. The different ways are
85
Box 1 Box 2 Box 3
A B
B A
A B
B A
A B
B A
AB
AB
AB
i.e. 9 ways. By formula n
r
= 3
2
= 9 ways
Example 3.28: In how many ways can 5 different balls be distributed among
3 boxes?
Solution:
There are 5 balls and each ball can be placed in 3 ways.
So the total number of ways = 3
5
= 243
Example: 3.29: In how many ways can 3 prizes be distributed among 4 boys,
when (i) no boy gets more than one prize?
(ii) a boy may get any number of prizes?
(iii) no boy gets all the prizes?
Solution:
(i) The total number of ways is the number of arrangements of 4 taken 3 at
a time.
So, the required number of ways =
4
P
3
= 4! = 24
(ii) The first prize can be given away in 4 ways as it may be given to
anyone of the 4 boys.
The second prize can also be given away in 4 ways, since it may be obtained
by the boy who has already received a prize.
Similarly, third prize can be given away in 4 ways.
Hence, the number of ways in which all the prizes can be given away
= 4 4 4 = 4
3
= 64
86
(iii) Since any one of the 4 boys may get all the prizes. So, the number of
ways in which a boy get all the 3 prizes = 4.
So, the number of ways in which a boy does not get all the prizes = 644=60
3.2.5 Circular Permutations:
We have seen that the number of permutations of n different things taken all
together is n!, where each permutation is a different arrangement of the n things
in a row, or a straight line. These permutations are called linear permutations or
simply permutations.
A circular permutation is one in which the things are arranged along a circle.
It is also called closed permutation.
Theorem 3.4:
The number of circular permutations of n distinct objects is (n 1)!
Proof:
Let a
1
, a
2
, , a
n1
, a
n
be n distinct objects.
Let the total number of circular permutations be x.
Consider one of these x permutations as shown in figure.
Clearly this circular permutation provides n
near permutations as given below
a
1
, a
2
, a
3
, , a
n 1
, a
n
a
2
, a
3
, a
4
, , a
n
, a
1

a
3
, a
4
, a
5
, , a
1
, a
2



a
n
, a
1
, a
2
, , a
n 2
, a
n 1



Fig. 3. 1
Thus, each circular permutation gives n linear permutations.
But there are x circular permutations.
So, total number of linear permutations is xn.
But the number of linear permutations of n distinct objects is n!.
xn = n!
x =
n!
n

x = (n 1) !
The total number of circular permutations of n distinct objects is (n 1)!
Note: In the above theorem anti-clockwise and clockwise order of arrangements
are considered as distinct permutations.
87
Difference between clockwise and anti-clockwise arrangements:
Consider the following circular permutations:

Fig. 3. 2

Fig. 3. 3
We observe that in both, the order of the circular arrangement is a
1
, a
2
, a
3
, a
4
.
In fig (3.2) the order is anti-clockwise, whereas in fig. (3.3) the order is
clockwise.
Thus the number of circular permutation of n things in which clockwise and
anti-clockwise arrangements give rise to different permutations is (n 1)!
If there are n things and if the direction is not taken into consideration, the
number of circular permutations is
1
2
(n 1)!
Example 3.30:
In how many ways 10 persons may be arranged in a (i) line (ii) circle?
Solution:
(i) The number of ways in which 10 persons can be arranged in a line
=
10
P
10
= 10!
(ii) The number of ways in which 10 persons can be arranged in a circle
= (10 1)! = 9!
Example 3.31: In how many ways can 7 identical beads be stung into a ring?
Solution: Since the arrangement is circular either clockwise arrangement or
anti-clockwise arrangement may be considered.
The required number of ways =
1
2
(7 1)! =
6!
2
= 360
Example 3.32: In how many ways can 5 gentlemen and 5 ladies sit together at a
round table, so that no two ladies may be together?
Solution:
The number of ways in which 5 gentlemen may be arranged is (5 1)! = 4!
88
Then the ladies may be arranged among themselves in 5! ways.
Thus the total number of ways = 4! 5! = 24 120 = 2880
Example 3.33: Find the number of ways in which 8 different flowers can be
strung to form a garland so that 4 particular flowers are never separated.
Solution:
Considering 4 particular flowers as one flower, we have five flowers, which
can be strung to form a garland in 4! ways.
But 4 particular flowers can be arranged in 4! ways.
Required number of ways = 4 ! 4 ! = 576
EXERCISE 3.3
1. Evaluate the following :
(i)
5
P
3
(ii)
15
P
3
(iii)
5
P
5
(iv)
25
P
20
(v)
9
P
5

2. If
n
P
4
= 20 .
n
P
3
, find n.
3. If
10
P
r
= 5040, find the value of r.
4. If
56
P
(r + 6)
:
54
P
(r + 3)
= 30800 : 1, find r
5. If P
m
stands for
m
P
m
, then prove that 1 + 1.P
1
+ 2.P
2
+ 3.P
3
+
+ n.P
n
= (n + 1)!
6. Prove that
n
P
r
=
(n 1)
P
r
+ r .
(n 1)
P
(r 1)
.
7. Three men have 4 coats, 5 waistcoats and 6 caps. In how many ways can
they wear them?
8. How many 4-letter words, with or without meaning, can be formed, out
of the letters of the word, LOGARITHMS, if repetition of letters is not
allowed?
9. How many 3-digit numbers are there, with distinct digits, with each digit
odd?
10. Find the sum of all the numbers that can be formed with the digits
2, 3, 4, 5 taken all at a time.
11. How many different words can be formed with the letters of the word
MISSISSIPPI?
12. (i) How many different words can be formed with letters of the word
HARYANA?
(ii) How many of these begin with H and end with N?
13. How many 4-digit numbers are there, when a digit may be repeated any
number of times?
14. In how many ways 5 rings of different types can be worn in 4 fingers?
89
15. In how many ways can 8 students are seated in a (i) line (ii) circle?
16. In how many ways can a garland of 20 similar flowers are made?
3.3 Combinations:
The word combination means selection. Suppose we are asked to make a
selection of any two things from three things a, b and c, the different selections
are ab, bc, ac.
Here there is no reference to the order in which they are selected.
i.e. ab and ba denote the same selection. These selections are called
combinations.
Definition:
A selection of any r things out of n things is called a combination of
n things r at a time.
Notation:
The number of all combinations of n objects, taken r at a time is generally
denoted by
n
C
r
or C(n,r) or
\
|
.
|
n
r
. We use the symbol
n
C
r
throughout our
discussion.

Thus
n
C
r
=

Number of ways of selecting


r objects from n objects

Difference between Permutation and Combination:
1. In a combination only selection is made whereas in a permutation not
only a selection is made but also an arrangement in a definite order is
considered.
i.e. in a combination, the ordering of the selected objects is immaterial
whereas in a permutation, the ordering is essential.
2. Usually the number of permutation exceeds the number of combinations.
3. Each combination corresponds to many permutations.
Combinations of n different things taken r at a time:
Theorem 3.5:
The number of all combinations of n distinct objects, taken r at a time is
given by
n
C
r
=
n!
(n r) ! r!

Proof: Let the number of combinations of n distinct objects, taken r at a time be
denoted by
n
C
r
.
Each of these combinations contains r things and all these things are
permuted among themselves.
The number of permutations obtained is r !
90
Hence from all the
n
C
r
combinations we get
n
C
r
r! permutations.
But this gives all the permutations of n things taken r at a time i.e.
n
P
r
.
Hence,
n
C
r
. r ! =
n
P
r


n
C
r
=
n
P
r
r!

=
n!
(n r)! r!

\
|
.
|
Q
n
P
r
=
n!
(n r)!

Properties
(1)
n
C
n
= 1 (2)
n
C
0
= 1 (3)
n
C
r
=
n
C
n r
0 r n
Proof:
(1) We know that
n
C
r
=
n!
(n r)! r!

Putting r = n, we have
n
C
n
=
n!
(n n)! n!
=
n !
0! n!

= 1
(2) Putting r = 0, we have

n
C
0
=
n!
(n 0) ! 0!
=
n !
n!
= 1
(3) We have
n
C
n r
=
n!
(n r)! ( ) n n r

!
=
n!
(n r)! r!

=
n
C
r

Note: The above property can be restated as follows :
If x and y are non-negative integers such that x + y = n, then
n
C
x
=
n
C
y

(4) If n and r are positive integers such that r n,
then
n
C
r
+
n
C
(r 1)
=
(n+1
)C
r

Proof: We have

n
C
r
+
n
C
(r 1)
=
n!
(n r)! r!
+
n!
( ) n r 1

! (r 1)!

=
n!
(n r)! r!
+
n!
(n r + 1) ! (r 1)!

=
n!
(n r) ! r{(r 1)!}
+
n!
(n r + 1) {(n r)! (r 1)!}

91
=
n!
(n r)! (r 1)!

)
`
1
r
+
1
n r + 1

=
n!
(n r)! (r 1)!

)
`

n r + 1 + r
r(n r + 1)

=
n!
(n r)! (r 1)!

)
`
n + 1
r(n r + 1)

=
(n + 1) {n!}
(n r + 1) (n r)! r(r 1)!

=
(n + 1)!
(n r + 1)! r!

=
(n + 1)!
(n + 1 r)! r!

=
(n + 1)
C
r

(5) If n and r are positive integers such that 1 r n,
then
n
C
r
=
n
r

(n 1)
C
(r 1)

Proof:

n
C
r
=
n!
(n r)! r!

=
n(n 1)!
[ ] (n 1) (r 1) ! r (r 1)!

=
n
r

(n 1)!
[ ] (n 1) (r 1) ! (r 1)!

=
n
r

(n 1)
C
(r 1)

(6)If 1 r n, then n .
(n 1)
C
(r 1)
= (n r + 1) .
n
C
(r 1)

Proof:
We have n .
(n 1)
C
(r 1)
= n

)
`

(n 1)!
[ ] (n 1) (r 1) ! (r 1)!

=
n!
(n r)! (r 1)!

=
(n r + 1)n!
(n r + 1) (n r)! (r 1)!

92
= (n r + 1)

(
n!
(n r + 1)! (r 1)!

= (n r + 1)

(
(
n!
( )
n r 1

! (r 1)!

= (n r + 1) .
n
C
(r 1)

(7) For any positive integers x and y,

n
C
x
=
n
C
y
x = y or x + y = n
Proof: We have
n
C
x
=
n
C
y


n
C
x
=
n
C
y
=
n
C
(n y)
[Q
n
C
y
=
n
C
(n y)
]
x = y or x = n y
x = y or x + y = n
Note: If
n
C
x
=
n
C
y
and x y, then x + y = n
Example 3.34: Evaluate the following :
(i)
6
C
3
(ii)
r = 1
5

5
C
r

Solution:
(i)
6
C
3
=
6
P
3
3!
=
6 5 4
1 2 3
= 20
(ii)
r = 1
5

5
C
r
=
5
C
1
+
5
C
2
+
5
C
3
+
5
C
4
+
5
C
5

= 5 + 10 + 10 + 5 + 1 = 31
Example 3.35: If
n
C
4
=
n
C
6
, find
12
C
n
Solution:

n
C
4
=
n
C
6
n = 4 + 6 = 10
Now
12
C
n
=
12
C
10

=
12
C
(12 10)
=
12
C
2
=
12 11
1 2

= 66
Example 3.36: If
15
C
r
:
15
C
(r 1)
= 11 : 5, find r
93
Solution:

15
C
r
:
15
C
(r 1)
= 11 : 5
15
C
r
15
C
(r 1)
=
11
5


15!
r!(15 r)!

15!
(r 1)! (15 r + 1)!
=
11
5


15!
r! (15 r)!

(r 1)! (16 r)!
15!
=
11
5


(r 1)! (16 r) {(15 r)!}
r(r 1)! (15 r)!
=
11
5


16 r
r
=
11
5

5(16 r) = 11r 80 = 16r
r = 5
Example 3.37:Show that the product of r consecutive integers is divisible by r!
Solution:
Let the r consecutive integers be n + 1, n + 2, n + 3, , n + r
Hence their product = (n + 1) (n + 2) (n + 3) (n + r)
=
1.2.3 n. (n + 1) (n + 2) (n + r)
1.2.3 n

=
(n + r)!
n!


their product
r!
=
(n + r)!
n! r!

=
(n + r)
C
r
which is an integer.
The product of r consecutive integers is divisible by r!
Example 3.38: Let r and n be positive integers such that 1 r n. Then prove
the following :

n
C
r
n
C
(r 1)
=
n r + 1
r

Solution:
n
C
r
n
C
(r 1)
=
n!
r!(n r)!
n!
(r 1)! (n r +1)!

94
=
n!
r! (n r)!

(r 1)! (n r + 1)!
n!

=
(r 1)! (n r + 1) {(n r)!}
r(r 1)! (n r)!

=
n r + 1
r

Example 3.39 : If
n
P
r
=
n
P
(r + 1)
and
n
C
r
=
n
C
(r 1)
, find the values of n and r
Solution:

n
P
r
=
n
P
(r + 1)

n!
(n r)!
=
n!
(n r 1)!


1
(n r) (n r 1)!
=
1
(n r 1)!

n r = 1 (1)

n
C
r
=
n
C
(r 1)

n!
r! (n r)!
=
n!
(r 1)! (n r + 1)!


n!
r(r 1)! (n r)!
=
n!
(r 1)! (n r + 1) {(n r)!}


1
r
=
1
n r + 1

n r + 1 = r
n 2r = 1 (2)
Solving (1) and (2) we get n = 3 and r = 2
EXERCISE 3.4
1. Evaluate the following:
(i)
10
C
8
(ii)
100
C
98
(iii)
75
C
75

2. If
n
C
10
=
n
C
12
, find
23
C
n

3. If
8
C
r

7
C
3
=
7
C
2
, find r
4. If
16
C
4
=
16
C
r + 2
, find
r
C
2

5. Find n if (i) 2 .
n
C
3
=
20
3

n
C
2
(ii)
n
C
(n 4)
=70
6. If
(n + 2)
C
8
:
(n 2)
P
4
= 57 : 16, find n.
7. If
28
C
2r
:
24
C
(2r 4)
= 225 : 11, find r.
95
Practical problems on Combinations
Example 3.40: From a group of 15 cricket players, a team of 11 players is to be
chosen. In how many ways this can be done?
Solution:
There are 15 players in a group. We have to select 11 players from the
group.
The required number of ways =
15
C
11


15
C
11
=
15 14 13 12
1 2 3 4
= 1365 ways
Example 3.41: How many different teams of 8, consisting of 5 boys and 3 girls
can be made from 25 boys and 10 girls?
Solution:
5 boys out of 25 boys can be selected in
25
C
5
ways.
3 girls out of 10 girls can be selected in
10
C
3
ways.
The required number of teams =
25
C
5

10
C
3
= 6375600
Example 3.42: How many triangles can be formed by joining the vertices of a
hexagon?
Solution:
There are 6 vertices of a hexagon.
One triangle is formed by selecting a group of 3 vertices from given
6 vertices.
This can be done in
6
C
3
ways.
Number of triangles =
6
C
3
=
6!
3! 3!
= 20
Example 3.43:
A class contains 12 boys and 10 girls. From the class 10 students are to be
chosen for a competition under the condition that atleast 4 boys and atleast
4 girls must be represented. The 2 girls who won the prizes last year should be
included. In how many ways can the selection are made?
Solution:
There are 12 boys and 10 girls. From these we have to select 10 students.
Since two girls who won the prizes last year are to be included in every
selection.
96
So, we have to select 8 students from 12 boys and 8 girls, choosing atleast
4 boys and atleast 2 girls. The selection can be formed by choosing
(i) 6 boys and 2 girls
(ii) 5 boys and 3 girls
(iii) 4 boys and 4 girls
Required number of ways = (
12
C
6

8
C
2
) + (
12
C
5

8
C
3
) + (
12
C
4

8
C
4
)
= (924 28) + (792 56) + (495 70)
= 25872 + 44352 + 34650
= 104874
Example 3.44: How many diagonals are there in a polygon?
Solution: A polygon of n sides has n vertices. By joining any two vertices
of a polygon, we obtain either a side or a diagonal of the polygon.
)
`

Number of line segments obtained by


joining the vertices of a n sided
polygon taken two at a time
=Number of ways of selecting 2 out of n
=
n
C
2
=
n(n 1)
2

Out of these lines, n lines are the sides of the polygon.
Number of diagonals of the polygon =
n(n 1)
2
n
=
n(n 3)
2

Example 3.45 How many different sections of 4 books can be made from 10
different books, if (i) there is no restriction
(ii) two particular books are always selected;
(iii) two particular books are never selected?
Solution:
(i) The total number of ways of selecting 4 books out of 10 =
10
C
4
=
10!
4! 6!
= 210
(ii) If two particular books are always selected.
This means two books are selected out of the remaining 8 books
Required number of ways =
8
C
2
=
8!
2! 6!
= 28
(iii) If two particular books are never selected
This means four books are selected out of the remaining 8 books.
Required number of ways =
8
C
4
=
8!
4! 4!
= 70
97
Example 3.46:
In how many ways players for a cricket team can be selected from a
group of 25 players containing 10 batsmen, 8 bowlers, 5 all-rounders and 2
wicket keepers? Assume that the team requires 5 batsmen, 3 all-rounder, 2
bowlers and 1 wicket keeper.
Solution:
The selection of team is divided into 4 phases:
(i) Selection of 5 batsmen out of 10. This can be done in
10
C
5
ways.
(ii) Selection of 3 all-rounders out of 5. This can be done in
5
C
3
ways.
(iii)Selection of 2 bowlers out of 8. This can be done in
8
C
2
ways.
(iv)Selection of one wicket keeper out of 2. This can be done in
2
C
1
ways.
The team can be selected in
10
C
5

5
C
3

8
C
2

2
C
1
ways
= 252 10 28 2 ways
= 141120 ways
Example 3.47: Out of 18 points in a plane, no three are in the same straight
line except five points which are collinear. How many
(i) straight lines (ii) triangles can be formed by joining them?
Solution:
(i) Number of straight lines formed joining the 18 points,
taking 2 at a time =
18
C
2
= 153
Number of straight lines formed by joining the 5 points,
taking 2 at a time =
5
C
2
= 10
But 5 collinear points, when joined pairwise give only one line.
Required number of straight lines = 153 10 + 1 = 144
(ii) Number of triangles formed by joining the 18 points,
taken 3 at a time =
18
C
3
= 816
Number of triangles formed by joining the 5 points,
taken 3 at a time =
5
C
3
= 10
But 5 collinear points cannot form a triangle when taken 3 at a time.
Required number of triangles = 816 10 = 806
EXERCISE 3.5
1. If there are 12 persons in a party, and if each two of them shake hands
with each other, how many handshakes happen in the party?
98
2. In how many ways a committee of 5 members can be selected from
6 men and 5 women, consisting of 3 men and 2 women?
3. How many triangles can be obtained by joining 12 points, five of, which
are collinear?
4. A box contains 5 different red and 6 different white balls. In how many
ways 6 balls be selected so that there are atleast two balls of each colour?
5. In how many ways can a cricket team of eleven be chosen out of a batch
of 15 players if
(i) there is no restriction on the selection
(ii) a particular player is always chosen;
(iii) a particular player is never chosen?
6. A candidate is required to answer 7 questions out of 12 questions which
are divided into two groups, each containing 6 questions. He is not
permitted to attempt more than 5 questions from either group. In how
many ways can he choose the 7 questions.
7. There are 10 points in a plane, no three of which are in the same straight
line, excepting 4 points, which are collinear. Find the
(i) the number of straight lines obtained from the pairs of these points
(ii) number of triangles that can be formed with the vertices as these
points.
8. In how many ways can 21 identical books on Tamil and 19 identical
books on English be placed in a row on a shelf so that two books on
English may not be together?
9. From a class of 25 students, 10 are to be chosen for an excursion party.
There are 3 students who decide that either all of them will join or none
of them will join. In how many ways can they be chosen?
3.4 Mathematical Induction:
Introduction:
The name Mathematical induction in the sense in which we have given
here, was first used by the English Mathematician Augustus De-Morgan
(1809 1871) in his article on Induction Mathematics in 1938. However the
originator of the Principle of Induction was Italian Mathematician Francesco
Mau Rolycus (1494 1575). The Indian Mathematician Bhaskara (1153 A.D)
had also used traces of Mathematical Induction in his writings.
Induction is the process of inferring a general statement from the truth of
particular cases.
99
For example, 4 = 2 + 2, 6 = 3 + 3, 8 = 3 + 5, 10 = 7 + 3 and so on.
From these cases one may make a general statement every even integer
except 2 can be expressed as a sum of two prime numbers. There are hundreds
of particular cases where this is known to be true. But we cannot conclude that
this statement is true unless it is proved. Such a statement inferred from
particular cases is called a conjecture. A conjecture remains a conjecture until it
is proved or disproved.
Let the conjecture be a statement involving natural numbers. Then a method
to prove a general statement after it is known to be true in some particular cases
is the principle of mathematical induction.
Mathematical induction is a principle by which one can conclude that a
statement is true for all positive integers, after proving certain related
propositions.
The Principle of Mathematical Induction:
Corresponding to each positive integer n let there be a statement or
proposition P(n).
If (i) P(1) is true,
and (ii) P(k + 1) is true whenever P(k) is true,
then P(n) is true for all positive integers n.
We shall not prove this principle here, but we shall illustrate it by some
examples.
Working rules for using principle of mathematical induction:
Step (1) : Show that the result is true for n = 1.
Step (2) : Assume the validity of the result for n equal to some
arbitrary but fixed natural number, say k.
Step (3) : Show that the result is also true for n = k + 1.
Step (4) : Conclude that the result holds for all natural numbers.
Example 3.48: Prove by mathematical induction n
2
+ n is even.
Solution: Let P(n) denote the statement n
2
+ n is even
Step (1):
Put n = 1
n
2
+ n = 1
2
+ 1
= 2, which is even
P(1) is true
Step (2):
Let us assume that the statement be true for n = k
100
(i.e.) assume P(k) be true.
(i.e.) assume k
2
+ k is even be true (1)
Step (3):
To prove P(k + 1) is true.
(i.e.) to prove (k + 1)
2
+ (k + 1) is even
Consider (k + 1)
2
+ (k + 1) = k
2
+ 2k + 1 + k + 1
= k
2
+ 2k + k + 2
= (k
2
+ k) + 2(k + 1)
= an even number + 2(k + 1), from (1)
= sum of two even numbers
= an even number
P(k + 1) is true.
Thus if P(k) is true, then P(k + 1) is also true.
Step (4):
By the principle of Mathematical induction, P(n) is true for all nN.
i.e. n
2
+ n is even for all nN.
Example 3.49: Prove by Mathematical induction 1 + 2 + 3 + + n =
n(n + 1)
2
,
nN
Solution: Let P(n) denote the statement : 1 + 2 + 3 + + n =
n(n + 1)
2

Put n = 1
P(1) is the statement : 1 =
1 (1 + 1)
2

1 =
1(2)
2

1 = 1
P(1) is true
Now assume that the statement be true for n = k.
(i.e.) assume P(k) be true.
(i.e.) assume 1 + 2 + 3 + + k =
k(k + 1)
2
(1) be true
To prove P(k + 1) is true
(i.e.) to prove1 + 2 + 3 + + k + (k + 1) =
(k + 1) (k + 2)
2
is true,
[1 + 2 + 3 + + k] + (k + 1) =
k(k + 1)
2
+ (k + 1) from (1)
101
=
k(k + 1) + 2(k + 1)
2

=
(k + 1) (k + 2)
2

P(k + 1) is true.
Thus if P(k) is true, then P(k + 1) is true.
By the principle of Mathematical induction, P(n) is true for all nN
1 + 2 + 3 + + n =
n(n + 1)
2
for all nN
Example 3.50: Prove by Mathematical induction
1
2
+ 2
2
+ 3
2
+ + n
2
=
n(n + 1) (2n + 1)
6
for all nN
Solution:
Let P(n) denote the statement 1
2
+ 2
2
+ 3
2
+ + n
2
=
n(n + 1) (2n + 1)
6

Put n = 1
P(1) is the statement : 1
2
=
1(1 + 1) [ ] 2(1) +1
6

1 =
1(2) (3)
6

1 = 1
P(1) is true.
Now assume that the statement be true for n = k.
(i.e.) assume P(k) be true.
(i.e.) 1
2
+ 2
2
+ 3
2
+ + k
2
=
k(k + 1) (2k + 1)
6
(1)
To prove : P(k + 1) is true
(i.e.) to prove: 1
2
+2
2
+3
2
++k
2
+(k+1)
2
=
(k + 1) (k + 2) (2k + 3)
6
is true.
[1
2
+ 2
2
+ 3
2
+ + k
2
] + (k +1)
2
=
k(k + 1) (2k + 1)
6
+ (k + 1)
2

=
k(k + 1) (2k +1) + 6(k + 1)
2
6

=
(k + 1) [ ] k(2k + 1) + 6(k + 1)
6

=
(k + 1) (2k
2
+ 7k + 6)
6

102
1
2
+ 2
2
+ 3
2
+ + k
2
+ (k +1)
2
=
(k + 1) (k + 2) (2k + 3)
6

P(k + 1) is true
Thus if P(k) is true, then P(k + 1) is true.
By the principle of Mathematical induction, P(n) is true for all nN
(i.e.) 1
2
+ 2
2
+ + n
2
=
n(n + 1) (2n + 1)
6
for all nN
Example 3.51: Prove by Mathematical induction
1.2 + 2.3 + 3.4 + + n(n + 1) =
n(n + 1) (n + 2)
3
, nN.
Solution:
Let P(n) denote the statement 1.2+2.3 + 3.4 ++ n(n + 1)=
n(n + 1) (n + 2)
3

Put n = 1
P(1) is the statement : 1(1 + 1) =
1(1 + 1) (1 + 2)
3

1(2) =
1(2) (3)
3

2 =
2(3)
3

2 = 2
P(1) is true.
Now assume that the statement be true for n = k.
(i.e.) assume P(k) be true
(i.e.) assume 1.2 + 2.3 + 3.4 ++ k(k + 1) =
k(k + 1) (k + 2)
3
be true
To prove : P(k + 1) is true
i.e. to prove :
1.2 + 2.3 + 3.4 + ,+ k(k + 1) + (k + 1) (k + 2) =
(k + 1) (k + 2) (k + 3)
3

Consider 1.2 + 2.3 + 3.4 + ,+ k(k + 1) + (k + 1) (k + 2)
= [ ] 1.2 + 2.3 + + k(k+1) + (k + 1) (k + 2)
=
k(k + 1) (k + 2)
3
+ (k + 1) (k + 2)
=
k(k + 1) (k + 2) + 3(k + 1) (k + 2)
3

=
(k + 1) (k + 2) (k + 3)
3

103
P(k + 1) is true
Thus if P(k) is true, P(k + 1) is true.
By the principle of Mathematical induction, P(n) is true for all nN.
1.2 + 2.3 + 3.4 + + n(n + 1) =
n(n + 1) (n + 2)
3

Example 3.52: Prove by Mathematical induction 2
3n
1 is divisible by 7, for
all natural numbers n.
Solution:
Let P(n) denote the statement 2
3n
1 is divisible by 7
Put n = 1
Then P(1) is the statement : 2
3(1)
1 = 2
3
1
= 8 1
= 7, which is divisible by 7
P(1) is true
Now assume that the statement be true for n = k
(i.e.) assume P(k) be true. (i.e.) 2
3k
1 is divisible by 7 be true
Now to prove P(k + 1) is true. (i.e.) to prove 2
3 (k + 1)
1 is divisible by 7
Consider 2
3(k + 1)
1 = 2
3k + 3
1
= 2
3k
. 2
3
1 = 2
3k
. 8 1
= 2
3k
. 8 1 + 8 8 (add and subtract 8)
= (2
3k
1) 8 + 8 1
= (2
3k
1) 8 + 7 = a multiple of 7 + 7
= a multiple of 7
2
3 (k + 1)
1 is divisible by 7
P(k + 1) is true
Thus if P(k) is true, then P(k + 1) is true.
By the principle of Mathematical induction, P(n) is true for all n N
2
3n
1 is divisible by 7 for all natural numbers n.
Example 3.53: Prove by Mathematical induction that a
n
b
n
is divisible by
(ab) for all n N
Solution: Let P(n) denote the statement a
n
b
n
is divisible by a b.
104
Put n = 1
Then P(1) is the statement : a
1
b
1
= a b is divisible by a b
P(1) is true.
Now assume that the statement be true for n = k.
(i.e.) assume P(k) be true. (i.e.) a
k
b
k
is divisible by (a b) be true.

a
k
b
k
a b
= c (say) where cN
a
k
b
k
= c(a b)
a
k
= b
k
+ c(a b) (1)
Now to prove P(k + 1) is true. (i.e.) to prove : a
k + 1
b
k + 1
is divisible
by a b
Consider a
k + 1
b
k + 1
= a
k
. a b
k
b
=
[ ]
b
k
+ c(a b) a b
k
b
= b
k
a + ac(a b) b
k
b
= b
k
(a b) + ac (a b)
= (a b) (b
k
+ ac) is divisible by (a b)
P(k + 1) is true.
By the principle of Mathematical induction, P(n) is true for all n N
a
n
b
n
is divisible by a b for all n N
EXERCISE 3.6
Prove the following by the principle of Mathematical Induction.
(1) (2n + 1) (2n 1) is an odd number for all n N
(2) 2 + 4 + 6 + 8 + + 2n = n (n + 1)
(3) 1 + 3 + 5 + + (2n 1) = n
2

(4) 1 + 4 + 7 + + (3n 2) =
n(3n 1)
2

(5) 4 + 8 + 12 + + 4n = 2n(n + 1)
(6) 1
3
+ 2
3
+ 3
3
+ + n
3
=
n
2
(n + 1)
2
4

(7)
1
2
+
1
2
2 +
1
2
3 + +
1
2
n = 1
1
2
n
105
(8) In the arithmetic progression a, a + d, a + 2d,
the n
th
term is a + (n 1)d
(9) 5
2n
1 is divisible by 24 for all n N
(10) 10
2n 1
+ 1 is divisible by 11.
(11) n(n + 1) (n + 2) is divisible by 6 where n is a natural number.
(12) The sum S
n
= n
3
+ 3n
2
+ 5n + 3 is divisible by 3 for all n N
(13) 7
2n
+ 16n 1 is divisible by 64
(14) 2
n
> n for all n N
3.5 Binomial Theorem:
Introduction:
A BINOMIAL is an algebraic expression of two terms which are
connected by the operation + (or)
For example, x + 2y, x y, x
3
+ 4y, a + b etc.. are binomials.
Expansion of Binomials with positive Integral Index:
We have already learnt how to multiply a binomial by itself. Finding
squares and cubes of a binomial by actual multiplication is not difficult.
But the process of finding the expansion of binomials with higher powers
such as (x + a)
10
, (x + a)
17
, (x + a)
25
etc becomes more difficult. Therefore we
look for a general formula which will help us in finding the expansion of
binomials with higher powers.
We know that
(x + a)
1
=x + a =
1
C
0
x
1
a
0
+
1
C
1
x
0
a
1

(x + a)
2
=x
2
+ 2ax + a
2
=
2
C
0
x
2
a
0
+
2
C
1
x
1
a
1
+
2
C
2
x
0
a
2

(x + a)
3
=x
3
+ 3x
2
a + 3xa
2
+ a
3
=
3
C
0
x
3
a
0
+
3
C
1
x
2
a
1
+
3
C
2
x
1
a
2
+
3
C
3
x
0
a
3

(x+a)
4
=x
4
+4x
3
+6x
2
a
2
+4xa
3
+a
4
=
4
C
0
x
4
a
0
+
4
C
1
x
3
a
1
+
4
C
2
x
2
a
2
+
4
C
3
x
1
a
3
+
4
C
4
x
0
a
4

For n = 1, 2, 3, 4 the expansion of (x + a)
n
has been expressed in a very
systematic manner in terms of combinatorial coefficients. The above
expressions suggest the conjecture that (x + a)
n
should be expressible in the
form,
106
(x + a)
n
= nC
0
x
n
a
0
+ nC
1
x
n 1
a
1
+ + nC
n 1
x
1
a
n 1
+ nCn x
0
a
n

In fact, this conjecture is proved to be true and we establish it by using
the principle of mathematical induction.
Theorem 3.6: (Binomial theorem for a Positive Integral Index)
Statement: For any natural number n
(x + a)
n
= nC
0
x
n
a
0
+ nC
1
x
n 1
a
1
+ + nCr x
n r
a
r
+
+ nC
n 1
x
1
a
n 1
+ nCn x
0
a
n

Proof:
We shall prove the theorem by the principle of mathematical induction.


Let P(n) denote the statement :
(x + a)
n
= nC
0
x
n
a
0
+ nC
1
x
n 1
a
1
+ + nCr x
n r
a
r
+
+ nC
n 1
x
1
a
n 1
+ nCn x
0
a
n

Step (1) :
Put n = 1
Then P(1) is the statement : (x + a)
1
=
1
C
0
x
1
a
0
+
1
C
1
x
1 1
a
1

x + a = x + a
P(1) is true
Step (2):
Now assume that the statement be true for n = k
(i.e.) assume P(k) be true.
(x + a)
k
=kC
0
x
k
a
0
+kC
1
x
k 1
a
1
+ kC
2
x
k 2
a
2
++ kC
r
x
k r
a
r
++
k
C
k
x
0
a
k

be true (1)
Step (3):
Now to prove P(k + 1) is true
(i.e.) To prove:
(x + a)
K + 1
=
(k + 1)
C
0
x
k + 1
+
(k + 1)
C
1
x
(k + 1) 1
a
1
+
(k + 1)
C
2
x
(k + 1) 2
a
2
+
+
(k + 1)
C
r
x
(k + 1) r
a
r
+ +
(k + 1)
C
(k + 1)
a
k + 1
Consider (x + a)
k + 1
= (x + a)
k
(x + a)
= [kC
0
x
k
+ kC
1
x
k 1
a
1
+ kC
2
x
k 2
a
2
+ + kC
(r1)
x
k (r 1)
a
(r 1)

+ kC
r
x
k r
a
r
+ + kC
k
a
k
] (x + a)
107
= [kC
0
x
k + 1
+ kC
1
x
k
a
1
+ kC
2
x
k 1
a
2
+ + kC
r1
x
k r + 2
a
r 1

+ kC
r
x
k r + 1
a
r
+ + kC
k
xa
k
]
+ [kC
0
x
k
a + kC
1
x
k 1
a
2
+ kC
2
x
k 2
a
3
+ + kC
r1
x
k r + 1
a
r

+ kC
r
x
k r
a
r + 1
+ + kC
k
a
k + 1
]
(x + a)
k + 1
= kC
0
x
k + 1
+ (kC
1
+ kC
0
) x
k
.a + (kC
2
+ kC
1
) x
k 1
a
2

+ + (kC
r
+ kC
r 1
) x
k r + 1
a
r
+ + kC
k
a
k + 1
(2)
We know that kC
r
+ kC
r 1
=
(k + 1)
C
r

Put r = 1, 2, 3, etc.
kC
1
+ kC
0
=
(k + 1)
C
1
kC
2
+ kC
1
=
(k + 1)
C
2


kC
r
+ kC
r1
=
(k + 1)
C
r
for 1 r k
kC
0
= 1 =
(k + 1)
C
0

kC
k
= 1 =
(k + 1)
C
(k + 1)
(2) becomes
(x + a)
k + 1
=
(k + 1)
C
0
x
k + 1
+
(k + 1)
C
1
x
k
a +
(k + 1)
C
2
x
k 1
a
2

+ +
(k + 1)
C
r
x
k + 1 r
a
r
+ +
(k + 1)
C
(k + 1)
a
k + 1

P(k + 1) is true
Thus if P(k) is true, P(k + 1) is true.
By the principle of mathematical induction P(n) is true for all nN
(x + a)
n
= nC
0
x
n
a
0
+ nC
1
x
n 1
a
1
+ + nCr x
n r
a
r
+
+ nC
n 1
x
1
a
n 1
+ nCn x
0
a
n
for all nN
Some observations:
1. In the expansion
(x + a)
n
= nC
0
x
n
a
0
+ nC
1
x
n 1
a
1
+ + nCr x
n r
a
r
+
+ nC
n 1
x
1
a
n 1
+ nCn x
0
a
n
, the general term is nC
r
x
n r
a
r
.
Since this is nothing but the (r + 1)
th
term, it is denoted by T
r + 1

i.e. T
r + 1
= nC
r
x
n r
a
r
.
2. The (n + 1)
th
term is T
n + 1
= nC
n
x
n n
a
n
= nC
n
a
n
, the last term.
Thus there are (n + 1) terms in the expansion of (x + a)
n

108
3. The degree of x in each term decreases while that of a increases such
that the sum of the powers in each term is equal to n.
We can write (x + a)
n
=
r = 0
n
nC
r
x
n r
a
r

4. nC
0
, nC
1
, nC
2
, , nC
r
, , nC
n
are called binomial coefficients. They
are also written as C
0
,

C
1
, C
2
, , C
n.
5. From the relation nC
r
= nC
n r
, we see that the coefficients of terms
equidistant from the beginning and the end are equal.
6. The binomial coefficients of the various terms of the expansion of
(x + a)
n

for n = 1, 2, 3, form a pattern.
Binomials Binomial coefficients
(x + a)
o
1
(x + a)
1
1 1


(x + a)
2
1 2 1
(x + a)
3
1 3 3 1
(x + a)
4
1 4 6 4 1


(x + a)
5
1 5 10 10 5 1
This arrangement of the binomial coefficients is known as Pascals
triangle after the French mathematician Blaise Pascal (1623 1662). The
numbers in any row can be obtained by the following rule. The first and last
numbers are 1 each. The other numbers are obtained by adding the left and right
numbers in the previous row.
1, 1 + 4 = 5, 4 + 6 = 10, 6 + 4 = 10, 4 + 1 = 5, 1
Some Particular Expansions:
In the expansion
(x + a)
n
= nC
0
x
n
a
0
+ nC
1
x
n 1
a
1
++ nCr x
n r
a
r
+
+ nC
n 1
x
1
a
n 1
+ nCn x
0
a
n
(1)
1. If we put a in the place of a we get
(x a)
n
= nC
0
x
n
nC
1
x
n 1
a
1
+ nC
2
x
n 2
a
2

+ (1)
r
nC
r
x
n r
a
r
+ + ( 1)
n
nC
n
a
n

109
We note that the signs of the terms are positive and negative
alternatively.
2. If we put 1 in the place of a in (1) we get,
(1 + x)
n
= 1 + nC
1
x + nC
2
x
2
+ + nC
r
x
r
+ + nC
n
x
n
(2)
3. If we put x in the place of x in (2) we get
(1 x)
n
= 1 nC
1
x + nC
2
x
2
+ ( 1)
r
nC
r
x
r
+ + ( 1)
n
nC
n
x
n

Middle Term:
The number of terms in the expansion of (x + a)
n
depends upon the index n.
The index is either even (or) odd. Let us find the middle terms.
Case (i) : n is even
The number of terms in the expansion is (n + 1), which is odd.
Therefore, there is only one middle term and it is given by Tn
2

+1

Case (ii) : n is odd
The number of terms in the expansion is (n + 1), which is even.
Therefore, there are two middle terms and they are given by Tn + 1
2
and
Tn + 3
2

Particular Terms:
Sometimes a particular term satisfying certain conditions is required in
the binomial expansion of (x + a)
n
. This can be done by expanding (x + a)
n
and
then locating the required term. Generally this becomes a tedious task, when the
index n is large. In such cases, we begin by evaluating the general term
T
r+1
and then finding the values of r by assuming T
r+1
to be the required term.
To get the term independent of x, we put the power of x equal to zero and
get the value of r for which the term is independent of x. Putting this value of
r in T
r+1
, we get the term independent of x.
Example 3.54:Find the expansion of : (i) (2x + 3y)
5
(ii)
\
|
.
|
2x
2

3
x
4

Solution:
(i) (2x + 3y)
5
=
5
C
0
(2x)
5
(3y)
o
+
5
C
1
(2x)
4
(3y)
1
+
5
C
2
(2x)
3
(3y)
2

+
5
C
3
(2x)
2
(3y)
3
+
5
C
4
(2x)
1
(3y)
4
+
5
C
5
(2x)
0
(3y)
5

= 1(32)x
5
(1) + 5(16x
4
) (3y) + 10(8x
3
) (9y
2
)
110
+ 10(4x
2
) (27y
3
) + 5(2x) (81y
4
) + (1) (1) (243y
5
)
= 32x
5
+ 240x
4
y + 720x
3
y
2
+ 1080x
2
y
3
+ 810xy
4
+ 243y
5

(ii)
\
|
.
|
2x
2

3
x
4
=
4
C
0
(2x
2
)
4

\
|
.
|

3
x
0
+
4
C
1
(2x
2
)
3

\
|
.
|

3
x
1

+
4
C
2
(2x
2
)
2

\
|
.
|

3
x
2
+
4
C
3
(2x
2
)
1

\
|
.
|

3
x
3
+
4
C
4
(2x
2
)
0

\
|
.
|

3
x
4

= (1) 16x
8
(1) + 4(8x
6
)
\
|
.
|

3
x
+ 6(4x
4
)
\
|
.
|
9
x
2 + 4(2x
2
)
\
|
.
|

27
x
3
+ (1) (1)
\
|
.
|
81
x
4
= 16x
8
96x
5
+ 216x
2

216
x
+
81
x
4

Example 3.55: Using binomial theorem, find the 7
th
power of 11.
Solution:
11
7
= (1 + 10)
7

=
7
C
0
(1)
7
(10)
0
+
7
C
1
(1)
6
(10)
1
+
7
C
2
(1)
5
(10)
2
+
7
C
3
(1)
4
(10)
3
+
7
C
4
(1)
3
(10)
4

+
7
C
5
(1)
2
(10)
5
+
7
C
6
(1)
1
(10)
6
+
7
C
7
(1)
0
(10)
7
= 1+70+
7 6
1 2
10
2
+
7 6 5
1 2 3
10
3
+
7 6 5
1 2 3
10
4
+
7 6
1 2
10
5
+ 7(10)
6
+ 10
7

= 1 + 70 + 2100 + 35000 + 350000 + 2100000 + 7000000 + 10000000
= 19487171
Example 3.56: Find the coefficient of x
5
in the expansion of
\

|
.
|
|
x +
1
x
3
17

Solution:
In the expansion of
\

|
.
|
|
x +
1
x
3
17
, the general term is
T
r + 1
=
17
C
r
x
17 r

\

|
.
|
|
1
x
3
r

=
17
C
r
x
17 4r

Let T
r + 1
be the term containing x
5

then, 17 4r = 5 r = 3
111
T
r + 1
= T
3 + 1

=
17
C
3
x
17 4(3)
= 680x
5

coefficient of x
5
= 680
Example 3.57: Find the constant term in the expansion of
\

|
.
|
|
x
2
x
2
10

Solution:
In the expansion of
\

|
.
|
|
x
2
x
2
10

T
r + 1
=
10
C
r
( ) x
10 r

\

|
.
|
|
2
x
2
r

=
10
C
r
x
10 r
2

( 2)
r
x
2r
=
10
C
r
( 2)
r
x
10 r
2
2r

=
10
C
r
( 2)
r
x
10 5r
2

Let T
r + 1
be the constant term
Then,
10 5r
2
= 0 r = 2
The constant term =
10
C
2
( 2)
2
x
10 5(2)
2

=
10 9
1 2
4 x
0

= 180
Example 3.58: If n N, in the expansion of (1 + x)
n
prove the following :
(i) Sum of the binomial coefficients = 2
n

(ii) Sum of the coefficients of odd terms = Sum of the coefficients of even
terms = 2
n 1

Solution: The coefficients nC
0
, nC
1
, nC
2
,

, nC
n
in the expansion of
(1 + x)
n
are called the binomial coefficients, we write them as C
0
, C
1
, C
2
, C
n
,
(1 + x)
n
= C
0
+ C
1
x + C
2
x
2
+ + C
r
x
r
+ + C
n
x
n

It is an identity in x and so it is true for all values of x.
112
Putting x = 1 we get
2
n
= C
0
+ C
1
+ C
2
+ + C
n
(1)
put x = 1
0 = C
0
C
1
+ C
2
C
3
+ ( 1)
n
C
n
C
0
+ C
2
+ C
4
+ = C
1
+ C
3
+ C
5
+
It is enough to prove that
C
0
+ C
2
+ C
4
+ = C
1
+ C
3
+ C
5
+ = 2
n 1

Let C
0
+ C
2
+ C
4
+ = C
1
+ C
3
+ C
5
+ = k (2)
From (1), C
0
+ C
1
+ C
2
+ + C
n
= 2
n

2k = 2
n
From (2)
k = 2
n 1

From (2), C
0
+ C
2
+ C
4
+ = C
1
+ C
3
+ C
5
+ = 2
n 1

EXERCISE 3.7
(1) Expand the following by using binomial theorem
(i) (3a + 5b)
5
(ii) (a 2b)
5
(iii) (2x 3x
2
)
5

(iv)
\
|
.
|
x +
1
y
11
(v) (x
2
+ 2y
3
)
6
(vi) ( ) x y + y x
4

(2) Evaluate the following:
(i) ( ) 2 + 1
5
+ ( ) 2 1
5
(ii) ( ) 3 + 1
5
( ) 3 1
5

(iii) ( ) 1 + 5
5
+ ( ) 1 5
5
(iv) ( ) 2 a + 3
6
+ ( ) 2 a 3
6

(v) ( ) 2 + 3
7
( ) 2 3
7

(3) Using Binomial theorem find the value of (101)
3
and (99)
3
.
(4) Using Binomial theorem find the value of (0.998)
3
.
(5) Find the middle term in the expansion of
(i)
\

|
.
|
|
3x
2x
2
3
8
(ii)
\
|
.
|
b
x
+
x
b
16

(iii)
\
|
.
|
a
x
x
16
(iv) (x 2y)
13
(v)
\

|
.
|
|
x +
2
x
2
17

113
(6) Show that the middle term of
(i) (1 + x)
2n
is
1.3.5.7 (2n 1)2
n
x
n
n!

(ii)
\
|
.
|
x +
1
2x
2n
is
1.3.5. (2n 1)
n!

(iii)
\
|
.
|
x
1
x
2n
is
( 1)
n
. 1.3.5.7. (2n 1)
n!
2
n

(7) Find the coefficient of x
5
in the expansion of
\
|
.
|
x
1
x
11

(8) Find the term independent of x (constant term) in the expansion of
(i)
\
|
.
|
2x
2
+
1
x
12
(ii)
\

|
.
|
| 4x
2
3

3
2x
9
(iii)
\

|
.
|
|
9x
b
cx
2
17

(9) In the expansion of (1 + x)
20
, the coefficient of r
th
and (r + 1)
th
terms are
in the ratio 1 : 6, find the value of r.
(10) If the coefficients of 5
th
, 6
th
and 7
th
terms in the expansion of (1 + x)
n

are in A.P., find n.


114
4. SEQUENCE AND SERIES
4.1 Introduction
We hear statements such as a sequence of events, a series of tests before
the board examination, a cricket test match series. In all these statements the
words sequence and series are used in the same sense. They are used to
suggest a succession of things or events arranged in some order. In mathematics
these words have special technical meanings. The word sequence is used as in
the common use of the term to convey the idea of a set of things in order, but
the word series is used in a different sense.
Let us consider the following example.
A rabbit and a frog are jumping on the same direction. When they started
they were one metre apart. The rabbit is jumping on the frog in order to catch it.
At the same time the frog is jumping forward half of the earlier distance to
avoid the catch. The jumping process is going on. Can the rabbit catch the frog?

Fig. 4. 1
Let a
1
, a
2
, a
3
, a
4
be the distances between the rabbit and the frog at the
first, second, third, fourth instants etc,. The distance between the rabbit and the
frog at the first instant is 1 metre.
a
1
= 1 ; a
2
=
1
2
; a
3
=
1
4
=
1
2
2
; a
4
=
1
8
=
1
2
3

Here a
1
, a
2
, a
3
form a sequence. There is a pattern behind the
arrangement of a
1
, a
2
, a
3
Now a
n
has the meaning,
(i.e.) a
n
is the distance between the rabbit and the frog at the n
th
instant
Further a
n
=
1
2
n 1
. When a
n
becomes 0 the rabbit will catch the frog.
As n , a
n
0
i.e. the distance between the frog and the rabbit is zero when n
115
At this stage the rabbit will catch the frog.
This example suggests that for each natural number there is a unique real
number.
i.e. 1 2 3 n

a
1
a
2
a
3
a
n

= 1 =
1
2
=
1
2
1
=
1
4
=
1
2
2
=
1
2
n 1

Consider the following list of numbers
(a) 8, 15, 22, 29, (b) 6, 18, 54, 162,
In the list (a) the first number is 8, the 2
nd
number is 15, the 3
rd
number is
22, and so on. Each number in the list is obtained by adding 7 to the previous
number.
In the list (b) the first number is 6, the 2
nd
number is 18, the 3
rd
number is
54 etc. Each number in the list is obtained by multiplying the previous number
by 3.
In these examples we observe the following:
(i) A rule by which the elements are written (pattern).
(ii) An ordering among the elements (order).
Thus a sequence means an arrangement of numbers in a definite order
according to some rule.
4.2 Sequence
A sequence is a function from the set of natural numbers to the set of real
numbers.
If the sequence is denoted by the letter a, then the image of n N under
the sequence a is a(n) = a
n
.
Since the domain for every sequence is the set of natural numbers, the
images of 1, 2, 3, n under the sequence a are denoted by a
1
, a
2
, a
3
a
n
,
respectively. Here a
1
, a
2
, a
3
a
n
, form the sequence.
A sequence is represented by its range.
Recursive formula
A sequence may be described by specifying its first few terms and a
formula to determine the other terms of the sequence in terms of its preceding
terms. Such a formula is called as recursive formula.
116
For example, 1, 4, 5, 9, 14, , is a sequence because each term (except the
first two) is obtained by taking the sum of preceding two terms. The
corresponding recursive formula is a
n + 2
= a
n
+ a
n + 1
, n 1 here a
1
=1, a
2
= 4
Terms of a sequence:
The various numbers occurring in a sequence are called its terms. We
denote the terms of a sequence by a
1
, a
2
, a
3
, , a
n
, , the subscript denote
the position of the term. The n
th
term is called the general term of the sequence.
For example, in the sequence 1, 3, 5, 7, 2n 1,
the 1
st
term is 1, 2
nd
term is 3, and n
th
term is 2n 1
Consider the following electrical circuit in which the resistors are indicated
with saw-toothed lines.

Fig. 4. 2
If all the resistors in the circuit are 1 ohm with a current of 1 ampere then
the voltage across the resistors are 1, 1, 2, 3, 5, 8, 13, 21,
In this sequence there is no fixed pattern. But we can generate the terms of
the sequence recursively using a relation. Every number after the second is
obtained by the sum of the previous two terms.
i.e. V
1
= 1
V
2
= 1
V
3
= V
2
+ V
1

V
4
= V
3
+ V
2

V
5
= V
4
+ V
3

.
.
.
V
n
= V
n 1
+ V
n 2

.
.
.
117
Thus the above sequence is given by the rule:
V
1
= 1
V2 = 1
Vn = Vn 1 + Vn 2 ; n 3
This sequence is called Fibonacci sequence. The numbers occurring in this
sequence are called Fibonacci numbers named after the Italian Mathematician
Leonardo Fibonacci.
Example 4.1:
Find the 7
th
term of the sequence whose n
th
term is ( 1)
n + 1

\
|
.
|
n + 1
n

Solution:
Given a
n
= ( 1)
n + 1

\
|
.
|
n + 1
n

substituting n = 7, we get
a
7
= ( 1)
7 + 1

\
|
.
|
8
7
=
8
7

4.3 Series
For a finite sequence 1, 3, 5, 7, 9 the familiar operation of addition gives
the symbol 1 + 3 + 5 + 7 + 9 which has the value 25.
If we consider the infinite sequence 1, 3, 5, 7, then the symbol
1 + 3 + 5 + 7 + has no definite value, because when we add more and more
terms the value steadily increases. 1 + 3 + 5 + 7 + 9 + is called an infinite
series. Thus a series is obtained by adding the terms of a sequence.
If a
1
, a
2
, a
3
, a
n
is an infinite sequence then a
1
+ a
2
+ + a
n
+ is
called an infinite series. It is also denoted by
k = 1

a
k

If S
n
= a
1
+ a
2
+ + a
n
then S
n
is called the n
th
partial sum of the series

k = 1

a
k

Example 4.2 Find the n
th
partial sum of the series
n = 1


1
2
n

Solution:
S
n
=
1
2
1
+
1
2
2
+ +
1
2
n

118
and S
n + 1
=
1
2
1
+
1
2
2
+ +
1
2
n
+
1
2
n + 1

S
n + 1
= S
n
+
1
2
n + 1
(1)
Also we can write S
n + 1
as
S
n + 1
=
1
2
1
+
1
2
2
+ +
1
2
n
+
1
2
n + 1

=
1
2

(
(
1 +
1
2
+
1
2
2
+ +
1
2
n

=
1
2

(
(
1 +
\

|
.
|
|
1
2
+
1
2
2
+ +
1
2
n

S
n + 1
=
1
2
[1 + S
n
] (2)
From (1) and (2) S
n
+
1
2
n + 1
=
1
2
[1 + S
n
]
2S
n
+
1
2
n
= 1 + S
n

S
n
= 1
1
2
n

Note: This can be obtained by using the idea of geometric series also. We know
that the sum to n terms of a geometric series is S
n
=
a(1 r
n
)
(1 r)

Here a =
1
2
, n = n, r =
1
2
(< 1)
S
n
=
1
2

(
(
1
\
|
.
|
1
2

n
1
1
2
= 1
1
2
n

EXERCISE 4.1
(1) Write the first 5 terms of each of the following sequences:
(i) a
n
= ( 1)
n 1
5
n + 1
(ii) a
n
=
n(n
2
+ 5)
4
(iii) a
n
= 11n + 10
(iv) a
n
=
n + 1
n + 2
(v) a
n
=
1 ( 1)
n
3
(vi) a
n
=
n
2
3
n

119
(2) Find the indicated terms of the following sequences whose n
th
term is
(i) a
n
= 2 +
1
n
; a
5
, a
7
(ii) a
n
= cos
\
|
.
|
n
2
; a
4
, a
5

(iii) a
n
=
(n + 1)
2
n
; a
7
, a
10
(iv) a
n
= ( 1)
n 1
2
n + 1
, a
5
, a
8

(3) Find the first 6 terms of the sequence whose general term is
a
n
=

n
2
1 if n is odd
n
2
+ 1
2
if n is even

(4) Write the first five terms of the sequence given by
(i) a
1
= a
2
= 2, a
n
= a
n 1
1, n > 2
(ii) a
1
= 1, a
2
= 2, a
n
= a
n 1
+ a
n 2
, n > 2
(iii) a
1
= 1, a
n
= na
n 1
, n 2
(iv) a
1
= a
2
= 1, a
n
= 2a
n 1
+ 3a
n 2
, n > 2
(5) Find the n
th
partial sum of the series
n = 1


1
3
n

(6) Find the sum of first n terms of the series
n = 1

5
n

(7) Find the sum of 101
th
terms to 200
th
term of the series
n = 1


1
2
n

4.4 Some special types of sequences and their series
(1) Arithmetic progression:
An arithmetic progression (abbreviated as A.P) is a sequence of numbers in
which each term, except the first, is obtained by adding a fixed number to the
immediately preceding term. This fixed number is called the common
difference, which is generally denoted by d.
For example, 1, 3, 5, 7, is an A.P with common difference 2.
(2) Arithmetic series:
The series whose terms are in A.P is called an arithmetic series.
For example, 1 + 3 + 5 + 7 + is an arithmetic series.
120
(3) Geometric progression
A geometric progression (abbreviated as G.P.) is a sequence of numbers in
which the first term is non-zero and each term, except the first is obtained by
multiplying the term immediately preceeding it by a fixed non-zero number.
This fixed number is called the common ratio and it is denoted by the letter r.
The general form of a G.P. is a, ar, ar
2
, , with a 0 and r 0, the
first term is a
(4) Geometric series:
The series a + ar + ar
2
+ + ar
n 1
+ is called a geometric series
because the terms of the series are in G.P. Note that the geometric series is finite
or infinite according as the corresponding G.P. consists of finite (or) infinite
number of terms.
(5) Harmonic progression:
A sequence of non-zero numbers is said to be in harmonic progression
(abbreviated as H.P.) if their reciprocals are in A.P.
The general form of H.P is
1
a
,
1
a + d
,
1
a + 2d
, , where a 0.
n
th
term of H.P. is T
n
=
1
a + (n 1)d

For example the sequences 1,
1
5
,
1
9
,
1
13
, is a H.P., since their reciprocals
1, 5, 9, 13, are in A.P.
Note: There is no general formula for the sum to n terms of a H.P. as we have
for A.P. and G.P.
Example 4.3 If the 5
th
and 12
th
terms of a H.P. are 12 and 5 respectively, find
the 15
th
term.
Solution:
T
n
=
1
a + (n 1)d

Given T
5
= 12
1
a + (5 1)d
= 12
1
a + 4d
= 12
a + 4d =
1
12
(1)
and T
12
= 5
1
a + (12 1)d
= 5
1
a + 11d
= 5
a + 11d =
1
5
(2)
121
(2) (1) 7d =
7
60
d =
1
60

(1) a + 4
\
|
.
|
1
60
=
1
12

a +
4
60
=
1
12
a =
1
12

4
60

a =
1
60

T
15
=
1
a + (15 1)d
=
1
1
60
+ 14
1
60

=
1
15
60
=
60
15

T
15
= 4
4.5 Means of Progressions
4.5.1 Arithmetic mean
A is called the arithmetic mean of the numbers a and b if and only if
a, A, b are in A.P. If A is the A.M between a and b then a, A, b are in A.P
A a = b A
2A = a + b
A =
a + b
2

A
1
, A
2
, , A
n
are called n arithmetic means between two given numbers
a and b if and only if a, A
1
, A
2
, A
n
, b are in A.P.
Example 4.4 : Find the n arithmetic means between a and b and find their sum.
Solution:
Let A
1
, A
2
, , A
n
be the n A.Ms between a and b. Then by the definition
of A.Ms a, A
1
, A
2
, , A
n
, b are in A.P
Let the common difference be d.
A
1
= a + d, A
2
= a + 2d, A
3
= a + 3d, , A
n
= a + nd and b = a + (n + 1)d
(n + 1)d = b a
d =
b a
n + 1

A
1
= a +
b a
n + 1
; A
2
= a +
2(b a)
n + 1
A
n
= a +
n(b a)
n + 1

122
Sum of n A.Ms between a and b is
A
1
+ A
2
+ + A
n
=

(
a +
b a
n + 1
+

(
a +
2(b a)
n + 1
+ +

(
a +
n(b a)
n + 1

= na +
(b a)
n + 1
[1 + 2 + + n]
= na +
(b a)
(n + 1)
.
n(n + 1)
2
= na +
n(b a)
2

=
2na + nb na
2
=
na + nb
2
= n
\
|
.
|
a + b
2

Example 4.5: Prove that the sum of n arithmetic means between two numbers is
n times the single A.M between them
Solution:
Let A
1
, A
2
, , A
n
be the n A.Ms between a and b.
From the example (4.4)
A
1
+ A
2
+ A
3
+ + A
n
= n
\
|
.
|
a + b
2
= n (A.M between a and b)
= n (single A.M between a and b)
Example 4.6: Insert four A.Ms between 1 and 14.
Solution:
Let A
1
, A
2
, A
3
, A
4
be the four A.Ms between 1 and 14.
By the definition 1, A
1
, A
2
, A
3
, A
4
, 14 are in A.P. Let d be the common
difference.
A
1
= 1 + d, ; A
2
= 1 + 2d ; A
3
= 1 + 3d, ; A
4
= 1 + 4d ; 14 = 1+5d
d = 3
A
1
= 1 + 3 = 2 ; A
2
= 1+2 3 = 5 ; A
3
= 1+33 = 8 ; A
4
= 1 + 12 = 11
The four A.Ms are 2, 5, 8 and 11.
4.5.2 Geometric Mean
G is called the geometric mean of the numbers a and b if and only if
a, G, b are in G.P.

G
a
=
b
G
= r
G
2
= ab
G = ab
123
Note:
(1) If a and b are positive then G = + ab
(2) If a and b are negative then G = ab
(3) If a and b are opposite sign then their G.M is not real and it is
discarded since we are dealing with real sequences.
i.e. If a and b are opposite in signs, then G.M between them does not exist.
Example 4.7: Find n geometric means between two given numbers a and b and
find their product.
Solution:
Let G
1
, G
2
, , G
n
be n geometric means between a and b.
By definition a, G
1
, G
2
, , G
n
, b are in G.P. Let r be the common ratio.
Then G
1
= ar, G
2
= ar
2
, , G
n
= ar
n
and b = ar
n + 1

r
n + 1
=
b
a
r =
\
|
.
|
b
a

1
n + 1

G
1
= a
\
|
.
|
b
a

1
n + 1
, G
2
= a
\
|
.
|
b
a

2
n + 1
G
n
= a
\
|
.
|
b
a

n
n + 1

The product is
G
1
. G
2
. G
3
. G
n
= a
\
|
.
|
b
a

1
n + 1
. a
\
|
.
|
b
a

2
n + 1
a
\
|
.
|
b
a

n
n + 1

= a
n

(
(
\
|
.
|
b
a

1 + 2 + + n
n + 1

= a
n

(
(
\
|
.
|
b
a

n(n + 1)
2(n + 1)
= a
n
\
|
.
|
b
a

n
2

= (ab)
n
2

Example 4.8: Find 5 geometric means between 576 and 9.
Solution:
Let G
1
, G
2
, G
3
, G
4
, G
5
be 5 G.Ms between a = 576 and b = 9
Let the common ratio be r
G
1
= 576r, G
2
= 576r
2
, G
3
= 576r
3
, G
4
= 576r
4
, G
5
= 576r
5
, 9 = 576r
6

124
r
6
=
9
576
r =
\
|
.
|
9
576

1
6
=
\
|
.
|
1
64

1
6

r =
1
2

G
1
= 576r = 576
1
2
= 288 G
2
= 576r
2
= 576
1
4
= 144
G
3
= 576r
3
= 576
1
8
= 72 G
4
= 576r
4
= 576
1
16
= 36
G
5
= 576r
5
= 576
1
32
= 18
Hence 288, 144, 72, 36, 18 are the required G.Ms between 576 and 9.
Example 4.9: If b is the A.M of a and c (a c) and (b a) is the G.M of
a and c a, show that a : b : c = 1 : 3 : 5
Solution:
Given b is the A.M of a and c
a, b, c are in A.P. Let the common difference be d
b = a + d (1)
c = a + 2d (2)
Given (b a) is the G.M of a and (c a)
(b a)
2
= a(c a)
d
2
= a(2d) From (1) and (2)
d = 2a [ d 0]
b = a + d c = a + 2d
b = a + 2a c = a + 2(2a)
b = 3a c = 5a
a : b : c = a : 3a : 5a
= 1 : 3 : 5
4.5.3 Harmonic mean
H is called the harmonic mean between a and b if a, H, b are in H.P
If a, H, b are in H.P then
1
a
,
1
H
,
1
b
are in A.P

1
H
=
1
a
+
1
b
2
;
2
H
=
1
a
+
1
b

125
H =
2ab
a + b

This H is single H.M between a and b
Definition:
H
1
, H
2
, H
n
are called n harmonic means between a and b if a, H
1
, H
2
,
H
n
, b are in H.P.
Relation between A.M., G.M. and H.M.
Example 4.10: If a, b are two different positive numbers then prove that
(i) A.M., G.M., H.M. are in G.P. (ii) A.M > G.M > H.M
Proof:
A.M. =
a + b
2
; G.M. = ab ; H.M. =
2ab
a + b

(i)
G.M
A.M
=
ab
a + b
2
=
2 ab
a + b
(1)

H.M
G.M
=
2ab
a + b
ab
=
2 ab
a + b
(2)
From (1) and (2)

G.M
A.M
=
H.M
G.M

A.M, G.M, H.M are in G.P
(ii)A.M G.M =
a + b
2
ab =
a + b 2 ab
2

=
( ) a b
2
2
> 0 a > 0 ; b > 0 ; a b
A.M > G.M (1)
G.M H.M = ab
2ab
a + b

=
ab (a + b) 2ab
a + b
=
ab [ ] a + b 2 ab
a + b

=
ab ( ) a b
2
a + b
> 0
G.M > H.M (2)
From (1) and (2) A.M. > G.M > H.M
126
EXERCISE 4.2
(1) (i) Find five arithmetic means between 1 and 19
(ii) Find six arithmetic means between 3 and 17
(2) Find the single A.M between
(i) 7 and 13 (ii) 5 and 3 (iii) (p + q) and (p q)
(3) If b is the G.M of a and c and x is the A.M of a and b and y is the A.M
of b and c, prove that
a
x
+
c
y
= 2
(4) The first and second terms of a H.P are
1
3
and
1
5
respectively, find the
9
th
term.
(5) If a, b, c are in H.P., prove that
b + a
b a
+
b + c
b c
= 2
(6) The difference between two positive numbers is 18, and 4 times their
G.M is equal to 5 times their H.M. Find the numbers.
(7) If the A.M between two numbers is 1, prove that their H.M is the square
of their G.M.
(8) If a, b, c are in A.P. and a, mb, c are in G.P then prove that a, m
2
b, c are
in H.P
(9) If the p
th
and q
th
terms of a H.P are q and p respectively, show that
(pq)
th
term is 1.
(10) Three numbers form a H.P. The sum of the numbers is 11 and the sum
of the reciprocals is one. Find the numbers.
4.6 Some special types of series
4.6.1 Binomial series
Binomial Theorem for a Rational Index:
In the previous chapter we have already seen the Binomial expansion for a
positive integral index n. (power is a positive integer)
(x + a)
n
= x
n
+ nC
1
x
n 1
a
1
+ nC
2
x
n 2
a
2
++ nC
r
x
n r
a
r
+ + nC
n
a
n

A particular form is
(1 + x)
n
= 1 + nx +
n(n 1)
2!
x
2
+
n(n 1) (n 2)
3!
x
3
+ + x
n

127
When n is a positive integer the number of terms in the expansion is (n+1)
and so the series is a finite series. But when it is not a positive integer, the series
does not terminate and it is an infinite series.
Theorem (without proof)
For any rational number n other than positive integer
(1 + x)
n
= 1 + nx +
n(n 1)
1.2
x
2
+
n(n 1) (n 2)
1.2.3
x
3
+
provided | x | < | .
Here we require the condition that | x | should be less than 1.
To see this, put x = 1 and n = 1 in the above formula for (1 + x)
n

The left side of the formula = (1 + 1)
1
=
1
2
,
while the right side = 1 + ( 1) (1) +
( 1) ( 2)
2
1
2
+
= 1 1 + 1 1 +
Thus the two sides are not equal. This is because, x = 1 doesnt satisfy | x | < 1.
This extra condition | x | < 1 is unnecessary, if n is a positive integer.
Differences between the Binomial theorem for a positive integral index and
for a rational index:
1. If n N, then (1 + x)
n
is defined for all values of x and if n is a
rational number other than the natural number, then (1 + x)
n
is defined
only when | x | < |.
2. If n N, then the expansion of (1 + x)
n
contains only n + 1 terms. If
n is a rational number other than natural number, then the expansion
of (1 + x)
n
contains infinitely many terms.
Some particular expansions
We know that , when n is a rational index,
(1 + x)
n
= 1 + nx +
n(n 1)
2!
x
2
+
n(n 1) (n 2)
3!
x
3
+ (1)
Replacing x by x, we get
(1 x)
n
= 1 nx +
n(n 1)
2!
x
2

n(n 1) (n 2)
3!
x
3
+ (2)
Replacing n by n in (1) we get
(1 + x)
n
= 1 nx +
n(n + 1)
2!
x
2

n(n + 1) (n + 2)
3!
x
3
+ (3)
128
Replacing x by x in (3), we get
(1 x)
n
= 1 + nx +
n(n + 1)
2!
x
2
+
n(n + 1) (n + 2)
3!
x
3
+ (4)
Note :
(1) If the exponent is negative then the value of the factors in the
numerators are increasing uniformly by 1
(2) If the exponent is positive then the value of the factors in the
numerators are decreasing uniformly by 1
(3) If the signs of x and n are same then all the terms in the expansion are
positive.
(4) If the signs of x and n are different, then the terms alternate in sign
Special cases
1. (1 + x)
1
= 1 x + x
2
x
3
+
2. (1 x)
1
= 1 + x + x
2
+ x
3
+
3. (1 + x)
2
= 1 2x + 3x
2
4x
3
+
4. (1 x)
2
= 1 + 2x + 3x
2
+ 4x
3
+
General term:
For a rational number n and | x | < 1, we have
(1 + x)
n
= 1 + nx +
n(n 1)
1.2
x
2
+
n(n 1) (n 2)
1.2.3
x
3
+
In this expansion
First term T
1
= T
0 + 1
= 1
Second term T
2
= T
1 + 1
= nx =
n
1
x
1

Third term T
3
= T
2 + 1
=
n(n 1)
1.2
x
2

Fourth term T
4
= T
3 + 1
=
n(n 1) (n 2)
1.2.3
x
3
etc.
(r + 1)
th
term : T
r + 1
=
n(n 1) (n 2) (n (r 1))
1.2.3 r
x
r

The general term is
T
r + 1
=
n(n 1) (n 2) r factors
r!
x
r
=
n(n 1) (n 2)(n r + 1)
r!
x
r

Example 4.11: Write the first four terms in the expansions of
(i) (1 + 4x)
5
where | x | <
1
4
(ii) (1 x
2
)

4
where | x | < |
129
Solution: (i) | 4x | = 4| x | < 4
\
|
.
|
1
4
= 1 | 4x | < 1
(1 + 4x)
5
can be expanded by Binomial theorem.
(1 + 4x)
5
= 1 ( 5) (4x) +
(5) (5 + 1)
1.2
(4x)
2

(5) (5 + 1) (5 + 2)
1.2.3
(4x)
3
+
= 1 20x + 15(16x
2
) 35(64x
3
) +
= 1 20x + 240x
2
2240x
3
+
(ii) (1 x
2
)
4
can be expanded by Binomial theorem since | x
2
| < 1
= 1 + (4) (x
2
) +
(4) (4 + 1)
1.2
(x
2
)
2
+
(4) (4 + 1) (4 + 2)
1.2.3
(x
2
)
3
+
= 1 + 4x
2
+ 10x
4
+ 20x
6
+
Example 4.12:Find the expansion of
1
(2 + x)
4
where |x| < 2 upto the fourth term.
Solution:

1
(2 + x)
4
= (2 + x)
4
= 2
4

\
|
.
|
1 +
x
2
4
| x | < 2

x
2
< 1
=
1
16

(
(
1 (4)
\
|
.
|
x
2
+
(4) (4 + 1)
1.2

\
|
.
|
x
2
2

(4) (4 + 1) (4 + 2)
1.2.3

\
|
.
|
x
2
3
+
=
1
16

(
(
1 2x +
(4) (5)
2

\

|
.
|
| x
2
4

(4) (5) (6)
1.2.3

x
3
8
+
=
1
16

x
8
+
5
32
x
2

5
32
x
3
+
Example 4.13:Show that (1+x)
n
= 2
n

(
(
1 n
\
|
.
|
1 x
1 + x
+ n
\
|
.
|
n + 1
2!

\
|
.
|
1 x
1 + x
2
+
Solution: Let y =
1 x
1 + x

R.H.S = 2
n

(
1 ny +
n(n + 1)
2!
y
2
+ = 2
n
[1 + y]
n

= 2
n

(
1 +
1 x
1 + x

n
= 2
n

(
1 + x + 1 x
1 + x
n

= 2
n

(
2
1 + x

n
= 2
n

(
1 + x
2

n
= (1 + x)
n
= L.H.S.
130
Approximation by using Binomial series
Example 4.14: Find the value of
3
126 correct to two decimal places.
Solution:

3
126 = (126)
1
3
= (125 + 1)
1
3

=

(
125
\
|
.
|
1 +
1
125

1
3
= (125)
1
3

\
|
.
|
1 +
1
125

1
3

= 5

(
1 +
1
3
.
1
125
+ Q
1
125
< 1
= 5

(
1 +
1
3
(0.008) by neglecting other terms
= 5[1 + 0.002666]
= 5.01 (correct to 2 decimal places)
Example 4.15: If x is large and positive show that
3
x
3
+ 6
3
x
3
+ 3 =
1
x
2
(app.)
Solution: Since x is large,
1
x
is small and hence

1
x
< 1

3
x
3
+ 6
3
x
3
+ 3 = (x
3
+ 6)
1
3
(x
3
+ 3)
1
3
= x
\

|
.
|
|
1 +
6
x
3

1
3
x
\

|
.
|
|
1 +
3
x
3

1
3

= x

(
(
1 +
1
3
.
6
x
3
+ x

(
(
1 +
1
3
.
3
x
3
+
=

(
(
x +
2
x
2
+

(
(
x +
1
x
2
+ =
2
x
2

1
x
2
+
=
1
x
2
(approximately)
Example 4.16: In the expansion (1 2x)

1
2
, find the coefficient of x
8
.
Solution: We know that
(1x)
n
=1+nx+
n(n + 1)
2!
x
2
+
n(n + 1) (n + 2)
3!
x
3
++
n(n + 1) (n + r 1)
r!
x
r
+
General term T
r + 1
=
n(n + 1) (n + r 1)
r!
x
r

Take n =
1
2
and replace x by 2x.
131
T
r + 1
=
1
2

\
|
.
|
3
2

\
|
.
|
5
2

\
|
.
|
2r 1
2
r!
(2x)
r
=
1.3.5 (2r 1)
r! 2
r
2
r
x
r

coefficient of x
r
=
1.3.5 (2r 1)
r!

put r = 8
coefficient of x
8
=
1.3.5.7.9.11.13.15
8!

4.6.2. Exponential series
Exponential theorem (without proof)
For all real values of x,

\
|
.
|
1 +
1
1!
+
1
2!
+ +
1
n!
+
x
= 1 +
x
1!
+
x
2
2!
+
x
3
3!
+
But e = 1 +
1
1!
+
1
2!
+
1
3!
+
For all real values of x, e
x
= 1 +
x
1!
+
x
2
2!
+
x
3
3!
+
Thus we have the following results:
e
x
= 1
x
1!
+
x
2
2!

x
3
3!
+

e
x
+ e
x
2
= 1 +
x
2
2!
+
x
4
4!
+

e
x
e
x
2
= x+
x
3
3!
+
x
5
5!
+

e + e
1
2
= 1 +
1
2!
+
1
4!
+

e e
1
2
=
1
1!
+
1
3!
+
1
5!
+
4.6.3 Logarithmic Series:
If 1 < x 1 then log(1 + x) = x
x
2
2
+
x
3
3

x
4
4
+
This series is called the logarithmic series.
132
The other forms of logarithmic series are as follows:
log(1 x) = x
x
2
2

x
3
3

log(1 x) = x +
x
2
2
+
x
3
3
+
log(1 + x) log(1 x) = 2
\

|
.
|
|
x +
x
3
3
+
x
5
5
+

1
2
log
1 + x
1 x
= x +
x
3
3
+
x
5
5
+
EXERCISE 4.3
(1) Write the first four terms in the expansions of the following:
(i)
1
(2 + x)
4
where | x | > 2 (ii)
1
3
6 3x
where | x | < 2
(2) Evaluate the following:
(i)
3
1003 correct to 2 places of decimals
(ii)
1
3
128
correct to 2 places of decimals
(3) If x is so small show that
1 x
1 + x
= 1 x +
x
2
2
(app.)
(4) If x is so large prove that x
2
+ 25 x
2
+ 9 =
8
x
nearly.
(5) Find the 5
th
term in the expansion of (1 2x
3
)
11
2

(6) Find the (r + 1)
th
term in the expansion of (1 x)
4

(7) Show that x
n
= 1 + n
\
|
.
|
1
1
x
+
n(n + 1)
1.2

\
|
.
|
1
1
x
2
+
133
5. ANALYTICAL GEOMETRY
Introduction
Geometry is the study of points, lines, curves, surfaces etc and their
properties. Geometry is based upon axioms and it was laid by the famous Greek
Mathematician Euclid about 300 B.C. In the 17
th
century A.D., the methods of
Algebra were applied in the study of Geometry and thereby Analytical
Geometry emerged out. The renowned French philosopher and Mathematician
Rene Descartes (1596 1650) showed how the methods of Algebra could be
applied to the study of Geometry. He thus became the founder of Analytical
Geometry (also called as Cartesian Geometry, from the latinized form of his
name Cartesius). To bring a relationship between Algebra and Geometry,
Descartes introduces basic algebraic entity number to the basic geometric
concept of point. This relationship is called system of coordinates. Descartes
relates the position of a point with its distance from fixed lines and its direction.
This chapter is a continuation of the study of the concepts of Analytical
Geometry to which the students had been introduced in earlier classes.
5.1 Locus
The path traced by a point when it moves
according to specified geometrical conditions is
called the locus of the point. For example, the
locus of a point P(x
1
, y
1
) whose distance from a
fixed point C (h, k) is constant a, is a circle
(fig. 5.1). The fixed point C is called the centre

Fig. 5. 1
and the fixed distance a is called the radius of the circle.
Example 5.1: A point in the plane moves so that its distance from (0, 1) is twice
its distance from the x-axis. Find its locus.
Solution:
Let A(0, 1) be the given point. Let
P(x
1
, y
1
) be any point on the locus. Let B be
the foot of the perpendicular from P(x
1
,y
1
) to
the x-axis. Thus PB = y
1
.
Given that PA = 2PB
PA
2
= 4PB
2

i.e. (x
1
0)
2
+ (y
1
1)
2
= 4y
1
2


Fig. 5. 2
134
i.e. x
1
2
+ y
1
2
2y
1
+ 1 = 4y
1
2
i.e. x
1
2
3y
1
2
2y
1
+ 1 = 0
The locus of (x
1
, y
1
) is x
2
3y
2
2y + 1 = 0
Example 5.2: Find the locus of the point which is equidistant from ( 1, 1) and
(4, 2).
Solution:
Let A( 1, 1) and B(4, 2) be the given points.
Let P(x
1
,y
1
) be any point on the locus. Given that PA = PB
PA
2
= PB
2

i.e. (x
1
+ 1)
2
+ (y
1
1)
2
= (x
1
4)
2
+ (y
1
+ 2)
2

i.e. x
1
2
+ 2x
1
+ 1 + y
1
2
2y
1
+ 1 = x
1
2
8x
1
+ 16 + y
1
2
+ 4y
1
+ 4
i.e. 10x
1
6y
1
18 = 0 i.e. 5x
1
3 y
1
9 = 0
The locus of the point (x
1
, y
1
) is 5x 3y 9 = 0
Example 5.3: If A and B are the two points ( 2, 3) and (4, 5), find the
equation of the locus of a point such that PA
2
PB
2
= 20.
Solution:
A( 2, 3) and B(4, 5) are the two given points. Let P(x
1
, y
1
) be any point
on the locus. Given that PA
2
PB
2
= 20.
(x
1
+ 2)
2
+ (y
1
3)
2

[ ]
(x
1
4)
2
+ (y
1
+5)
2
= 20
x
1
2
+ 4x
1
+ 4 + y
1
2
6y
1
+ 9 [x
1
2
8x
1
+ 16 + y
1
2
+ 10y
1
+ 25] = 20
12x
1
16y
1
48 = 0
i.e. 3x
1
4y
1
12 = 0
The locus of (x
1
,y
1
) is 3x 4y 12 = 0
Example 5.4: Find a point on x-axis which is equidistant from the points
(7, 6) and (3, 4) .
Solution:
Let P(x
1
, y
1
) be the required point. Since P lies on x-axis, y
1
= 0.
Given that A(7, 6) and B(3, 4) are equidistant from P.
i.e. PA = PB PA
2
= PB
2

(x
1
7)
2
+ (0 + 6)
2
= (x
1
3)
2
+ (0 4)
2

135
x
1
2
14x
1
+ 49 + 36 = x
1
2
6x
1
+ 9 + 16
8x
1
= 60 x
1
= 15/2
Thus the required point is
\
|
.
|
15
2
,0

EXERCISE 5.1
(1) A point moves so that it is always at a distance of 6 units from the point
(1, 4). Find its locus.
(2) Find the equation of the locus of the point which are equidistant from
(1, 4) and ( 2, 3).
(3) If the point P(5t 4, t + 1) lies on the line 7x 4y + 1 = 0, find
(i) the value of t (ii) the co-ordinates of P.
(4) The distance of a point from the origin is five times its distance from
the y-axis. Find the equation of the locus.
(5) Show that the equation of the locus of a point which moves such that its
distance from the points (1, 2) and (0, 1) are in the ratio 2 : 1 is 3x
2
+
3y
2
+ 2x + 12y1=0.
(6) A point P moves such that P and the points (2, 3), (1, 5) are always
collinear. Show that the equation of the locus of P is 2x + y 7 = 0.
(7) A and B are two points (1, 0) and ( 2, 3). Find the equation of the
locus of a point such that (i) PA
2
+ PB
2
= 10 (ii) PA = 4PB.
5.2 Straight lines
5.2.1 Introduction
A straight line is the simplest geometrical curve. Every straight line is
associated with an equation. To determine the equation of a straight line, two
conditions are required. We have derived the equation of a straight line in
different forms in the earlier classes. They are
(1) Slope-intercept form:
i.e. y = mx + c where m is the slope of the straight line and c is the
y intercept.
(2) Point-slope form:
i.e. y y
1
= m(x x
1
) where m is the slope and (x
1
, y
1
) is the given point.
(3) Two point form:
i.e
y y
1
y
2
y
1
=
x x
1
x
2
x
1
where (x
1
, y
1
) and (x
2
, y
2
) are the two given points.
136
(4) Intercept form:
i.e.
x
a
+
y
b
= 1 where a and b are x and y intercepts respectively.
In this section we shall derive and discuss other forms of equation of a
straight line.
5.2.2 Normal form:
Equation of a straight line in terms of the length of the perpendicular
p from the origin to the line and the angle which the perpendicular
makes with x-axis.
Let R and N be the points where the
straight line cuts the x and y axes
respectively.
Draw the perpendicular OL to RN.
Let OL = p and XOL = .
Now OR and ON are the x and y
intercepts respectively.

Fig. 5. 3
The equation of the straight line is
x
OR
+
y
ON
= 1 (1)
From the right angled triangle OLR, sec =
OR
OL
OR = p sec
From the right angled triangle OLN, cosec = sec (90 ) =
ON
OL

ON = p cosec
Substituting the values of OR and ON in equation (1),
we get,
x
p sec
+
y
p cosec
= 1 i.e.
x cos
p
+
y sin
p
= 1
i.e. x cos + y sin = p is the required equation of the straight line.
5.2.3 Parametric form
Definition: If two variables, say x and y, are functions of a third variable,
say , then the functions expressing x and y in terms of are called the
parametric representations of x and y. The variable is called the parameter of
the function.
Equation of a straight line passing through the point (x
1
, y
1
) and
making an angle with x-axis. (parametric form)
137
Let Q (x
1
, y
1
) be the given point and P(x, y) be
any point on the required straight line. Assume
that PQ = r.
It is given that
PTR = . But PQM = PTR
PQM =
In the right angled triangle PQM,
(1)

Fig. 5. 4
cos =
QM
PQ
=
NR
r
=
OR ON
r
=
x x
1
r


x x
1
cos
= r
Similarly sin =
PM
PQ
=
PR MR
r
=
y y
1
r


y y
1
sin
= r (2)
From (1) and (2),
x x
1
cos
=
y y
1
sin
= r which is the required equation.
Any point on this line can be taken as (x
1
+ r cos , y
1
+ r sin ) where r is
the algebraic distance. Here r is the parameter.
5.2.4 General form
The equation ax + by + c = 0 will always represent a straight line.
Let (x
1
, y
1
), (x
2
, y
2
) and (x
3
, y
3
) be any three points on the locus
represented by the equation ax + by + c = 0. Then
ax
1
+ by
1
+ c = 0 (1)
ax
2
+ by
2
+ c = 0 (2)
ax
3
+ by
3
+ c = 0 (3)
(1) (y
2
y
3
) + (2) (y
3
y
1
) + (3) (y
1
y
2
) gives
a
[ ]
x
1
(y
2
y
3
) + x
2
(y
3
y
1
) + x
3
(y
1
y
2
) = 0
Since a 0, x
1
(y
2
y
3
) + x
2
(y
3
y
1
) + x
3
(y
1
y
2
) = 0
138
That is (x
1
, y
1
), (x
2
, y
2
) and (x
3
, y
3
) are collinear and hence they lie on a
straight line.
Thus the equation ax + by + c = 0 represents a straight line.
5.2.5. Perpendicular distance from a point to a straight line
The length of the perpendicular from the point (x
1
, y
1
) to the line
ax + by + c = 0 is

ax
1
+ by
1
+ c
a
2
+ b
2

Let the given line ax + by + c = 0 (1)
be represented by AB.
Let P(x
1
, y
1
) be the given point.
Draw PD perpendicular to AB. Note that
PD is
the required distance.
Draw OM parallel to PD. Let OM = p
Assume that MOB = .
Fig. 5. 5
From 5.2.2, the equation of the straight line AB is
x cos + y sin p = 0 (2)
Now equations (1) and (2) are representing the same straight line. Hence
their corresponding coefficients are proportional.

cos
a
=
sin
b
=
p
c

cos =
ap
c
, sin =
pb
c

We know that sin
2
+ cos
2
= 1

p
2
b
2
c
2
+
p
2
a
2
c
2
= 1 i.e. p
2
a
2
+ p
2
b
2
= c
2

p
2
(a
2
+ b
2
) = c
2
i.e p
2
=
c
2
a
2
+ b
2

p =
c
a
2
+ b
2

Hence cos = K
a
a
2
+ b
2
, sin = K
b
a
2
+ b
2

139
Suppose OL = p, the equation of the straight line NR is
x cos + y sin p = 0
since P(x
1
, y
1
) is a point on NR
x
1
cos + y
1
sin p = 0
i.e. OL = p = x
1
cos + y
1
sin
From the figure, the required distance
PD = LM = OM OL = p p
= p x
1
cos y
1
sin
=
c
a
2
+ b
2

x
1
. a
a
2
+ b
2

y
1
. b
a
2
+ b
2
=
ax
1
+by
1
+c
a
2
+ b
2

The required distance =

ax
1
+ by
1
+ c
a
2
+ b
2

Corollary:
The length of the perpendicular from the origin to ax + by + c = 0 is

c
a
2
+ b
2

Note: The general equation of the straight line is ax+by+c = 0 i.e. y =
a
b
x
c
a

This is of the form y = mx + c.
m =
a
b
i.e. slope =
co-efficient of x
co-efficient of y

Example 5.5: Determine the equation of the straight line whose slope is 2 and
y-intercept is 7.
Solution:
The slope intercept form is y = mx + c Here m = 2, c = 7
The required equation of the straight line is y = 2x + 7
Example 5.6: Determine the equation of the straight line passing through
( 1, 2) and having slope
2
7

Solution:
The point-slope form is y y
1
= m(x x
1
).
Here (x
1
, y
1
) = ( 1, 2) and m =
2
7

y 2 =
2
7
(x + 1) i.e. 7y 14 = 2x + 2
2x 7y + 16 = 0 is the equation of the straight line.
140
Example 5.7:
Determine the equation of the straight line passing through the points
(1, 2) and (3, 4).
Solution:
The equation of a straight line passing through two points is
y y
1
y
1
y
2
=
x x
1
x
1
x
2

Here (x
1
, y
1
) = (1, 2) and (x
2
, y
2
) = (3, 4).
Substituting the above, the required line is
y 2
2 + 4
=
x 1
1 3


y 2
6
=
x 1
2

y 2
3
=
x 1
1

y 2 = 3 (x 1) y 2 = 3x + 3
3x + y = 5 is the required equation of the straight line.
Example 5.8: Find the equation of the straight line passing through the point (1,
2) and making intercepts on the co-ordinate axes which are in the ratio 2 : 3.
Solution:
The intercept form is
x
a
+
y
b
= 1 (1)
The intercepts are in the ratio 2 : 3 a = 2k, b = 3k.
(1) becomes
x
2k
+
y
3k
= 1 i.e. 3x + 2y = 6k
Since (1, 2) lies on the above straight line, 3 + 4 = 6k i.e. 6k = 7
Hence the required equation of the straight line is 3x + 2y = 7
Example 5.9: Find the length of the perpendicular from (2, 3) to the line
2x y + 9 = 0
Solution:
The perpendicular distance from (x
1
, y
1
) to the straight line ax + by + c = 0
is given by

ax
1
+ by
1
+ c
a
2
+ b
2

The length of the perpendicular from (2, 3) to the straight line
2x y + 9 = 0 is

2(2) ( 3) + 9
(2)
2
+ ( 1)
2
=
16
5
units.
Example 5.10: Find the co-ordinates of the points on the straight line y = x + 1
which are at a distance of 5 units from the straight line 4x 3y + 20 = 0
141
Solution: Let (x
1
, y
1
) be a point on y = x + 1
y
1
= x
1
+ 1 (1)
The length of the perpendicular from (x
1
, y
1
) to the straight line
4x 3y + 20 = 0 is

4x
1
3y
1
+ 20
4
2
+ ( 3)
2
=
\

|
.
|
|
4x
1
3y
1
+ 20
5

But the length of the perpendicular is given as 5.

\

|
.
|
|
4x
1
3y
1
+ 20
5
= 5
4x
1
3y
1
+ 20 = 25
Considering the positive sign, 4x
1
3y
1
+ 20 = 25
4x
1
3y
1
= 5 (2)
Considering the negative sign, 4x
1
3y
1
+ 20 = 25
4x
1
3y
1
= 45 (3)
Solving (1) and (2), we get x
1
= 8, y
1
= 9
Solving (1) and (3), we get x
1
= 42, y
1
= 41.
The co-ordinates of the required points are (8, 9) and ( 42, 41).
Example 5.11: Find the equation of the straight line, if the perpendicular from
the origin makes an angle of 120 with x-axis and the length of the
perpendicular from the origin is 6 units.
Solution:
The normal form of a straight line is x cos + y sin = p
Here = 120, p = 6 x cos 120 + y sin 120 = 6
x
\
|
.
|

1
2
+ y
\
|
.
|
3
2
= 6 x + 3 y = 12
x 3 y + 12 = 0
The required equation of the straight line is x 3 y + 12 = 0
Example 5.12: Find the points on y-axis whose perpendicular distance from the
straight line 4x 3y 12 = 0 is 3.
Solution:
Any point on y-axis will have x co-ordinate as 0.
Let the point on y-axis be P(0, y
1
).
142
The given straight line is 4x 3y 12 = 0 (1)
The perpendicular distance from the point P to the given straight line is

3y
1
12
4
2
+ ( 3)
2
=

3y
1
+ 12
5

But the perpendicular distance is 3.
i.e.

3y
1
+ 12
5
= 3 3y
1
+ 12 = 15
3y
1
+ 12 = 15 or 3y
1
+ 12 = 15
3y
1
= 3 or 3y
1
= 27
y
1
= 1 or y
1
= 9
Thus the required points are (0, 1) and (0, 9).
EXERCISE 5.2
(1) Determine the equation of the straight line passing through the point
( 1, 2) and having slope
4
7

(2) Determine the equation of the line with slope 3 and y-intercept 4.
(3) A straight line makes an angle of 45 with x-axis and passes through the
point (3, 3). Find its equation.
(4) Find the equation of the straight line joining the points (3, 6) and
(2, 5).
(5) Find the equation of the straight line passing through the point (2, 2)
and having intercepts whose sum is 9.
(6) Find the equation of the straight line whose intercept on the x-axis is
3 times its intercept on the y-axis and which passes through the point
( 1, 3).
(7) Find the equations of the medians of the triangle formed by the points
(2, 4), (4, 6) and ( 6, 10).
(8) Find the length of the perpendicular from (3, 2) to the straight line
3x + 2y + 1=0.
(9) The portion of a straight line between the axes is bisected at the point
( 3, 2). Find its equation.
(10) Find the equation of the diagonals of a quadrilateral whose vertices are
(1, 2), ( 2, 1), (3, 6) and (6, 8).
143
(11) Find the equation of the straight line, which cut off intercepts on the
axes whose sum and product are 1 and 6 respectively.
(12) Find the intercepts made by the line 7x + 3y 6 = 0 on the co-ordinate
axis.
(13) What are the points on x-axis whose perpendicular distance from the
straight line
x
3
+
y
4
= 1 is 4?
(14) Find the distance of the line 4x y = 0 from the point (4, 1) measured
along the straight line making an angle of 135 with the positive
direction of the x-axis.
5.3. Family of straight lines
In the previous section, we studied about a single straight line. In this
section we will discuss the profile about more than one straight line, which lie
on a plane.
5.3.1 Angle between two straight lines
Let l
1
: y = m
1
x + c
1
and
l
2
: y = m
2
x + c
2
be the two
intersecting lines and assume that P be
the point of intersection of the two
straight lines which makes angle
1
and

2
with the positive direction of x-axis.
Then m
1
= tan
1
and m
2
= tan
2
. Let
be the angle between the two straight
lines.

Fig. 5. 6
From the figure (5.6),
1
= +
2

=
1

2

tan = tan (
1

2
) =
tan
1
tan
2
1 + tan
1
.tan
2
=
m
1
m
2
1 + m
1
m
2

Note that
m
1
m
2
1 + m
1
m
2
is either positive or negative. As convention we
consider the acute angle as the angle between any two straight lines and hence
we consider only the positive value (absolute value) of tan.
Hence tan =

m
1
m
2
1 + m
1
m
2
= tan
1

m
1
m
2
1 + m
1
m
2

144
Corollary (1) : If the two straight lines are parallel, then their slopes are equal.
Proof:
Since the two straight lines are parallel, = 0. tan = 0

m
1
m
2
1 + m
1
m
2
= 0 m
1
m
2
= 0
i.e. m
1
= m
2

If the straight lines are parallel, then the slopes are equal.
Note : If the slopes are equal, then the straight lines are parallel.
Corollary (2): If the two straight lines are perpendicular then the product of
their slopes is 1.
Proof:
Since the two straight lines are perpendicular, = 90.
tan = tan90 =
m
1
m
2
1 + m
1
m
2
=
This is possible only if the denominator is zero.
i.e. 1 + m
1
m
2
= 0 i.e. m
1
m
2
= 1
If the two straight lines are perpendicular then the product of their
slopes is 1.
Note (1): If the product of the slopes is 1, then the straight lines are
perpendicular.
(2): Corollary (2) is applicable only if both the slopes m
1
and m
2
are
finite. It fails when the straight lines are co-ordinate axes or parallel
to axes.
Corollary (3): If the straight lines are parallel, then the coefficients of x and y
are proportional in their equations. In particular, the equations of two parallel
straight lines differ only by the constant term.
Proof:
Let the straight lines a
1
x + b
1
y + c
1
= 0 and a
2
x + b
2
y + c
2
= 0 be parallel.
Slope of a
1
x + b
1
y + c
1
= 0 is m
1
=
a
1
b
1
; Slope of a
2
x + b
2
y + c
2
= 0 is
m
2
=
a
2
b
2

Since the straight lines are parallel, m
1
= m
2
.
i.e.
a
1
b
1
=
a
2
b
2

a
1
a
2
=
b
1
b
2

145
i.e. coefficients of x and y are proportional
Let
a
2
a
1
=
b
2
b
1
= (say)
a
2
= a
1
, b
2
= b
1

The second equation a
2
x + b
2
y + c
2
= 0 can be written as
a
1
x + b
1
y + c
2
= 0
i.e. a
1
x + b
1
y +
c
2

= 0 i.e. a
1
x + b
1
y + k = 0 where k =
c
2


i.e. If a
1
x + b
1
y + c
1
= 0 is a straight line then a line parallel to it is
a
1
x + b
1
y + k = 0
Equations of parallel straight lines differ by the constant term.
Note (1): In the previous section, we established a formula to find the
distance between the origin and the straight line. i.e. distance =

c
a
2
+ b
2

We can find out the distance between two parallel straight lines
ax + by + c
1
= 0 and ax + by + c
2
= 0 by using the formula d =
| c
1
c
2
|
a
2
+ b
2
.
This is obtained by using the above result. Note that, we took | c
1
c
2
| since
c
2
> c
1
or c
1
> c
2

Note (2): To apply the above formula, write the equations of the parallel
straight lines in the standard form ax + by + c
1
= 0 and ax + by + c
2
= 0.
Corollary (4): The equation of the straight line perpendicular to the straight
line ax + by + c = 0 is of the form bx ay + k = 0 for some k.
Proof:
Let the straight lines ax + by + c = 0 and a
1
x + b
1
y + c
1
= 0 be
perpendicular.
Slope of ax + by + c = 0 is m
1
=
a
b

Slope a
1
x + b
1
y + c
1
= 0 is m
2
=
a
1
b
1

Since the straight lines are perpendicular, m
1
m
2
= 1
i.e.
\

|
.
|
|

a
1
b
1

\
|
.
|

a
b
= 1 i.e. aa
1
= bb
1

146
i.e.
a
1
b
=
b
1
a
= (say) a
1
= b and b
1
= a
The second equation a
1
x + b
1
y + c
1
= 0 can be written as bx ay + c
1
= 0
i.e. bx ay +
c
1

= 0
i.e. bx ay + k = 0 where k =
c
1


A straight line perpendicular to ax + by + c = 0 is given by bx ay + k = 0
for some k.
Note: To find the point of intersection of two straight lines, solve the
simultaneous equations of the straight lines.
5.3.3 The condition for the three straight lines to be concurrent
Let the three straight lines be given by
a
1
x + b
1
y + c
1
= 0 (1)
a
2
x + b
2
y + c
2
= 0 (2)
a
3
x + b
3
y + c
3
= 0 (3)
If the three straight lines are concurrent, then the point of intersection of
any two straight lines lies on the third straight line.
Solving the equation (1) and (2), the coordinates of the point of
intersection is
x =
b
1
c
2
b
2
c
1
a
1
b
2
a
2
b
1
, y =
c
1
a
2
c
2
a
1
a
1
b
2
a
2
b
1

substituting the values of x and y in the equation (3)
a
3

\

|
.
|
|
b
1
c
2
b
2
c
1
a
1
b
2
a
2
b
1
+ b
3

\

|
.
|
|
c
1
a
2
c
2
a
1
a
1
b
2
a
2
b
1
+ c
3
= 0
i.e. a
3
(b
1
c
2
b
2
c
1
) +b
3
(c
1
a
2
c
2
a
1
) + c
3
(a
1
b
2
a
2
b
1
) = 0
i.e. a
1
(b
2
c
3
b
3
c
2
) b
1
(a
2
c
3
a
3
c
2
) + c
1
(a
2
b
3
a
3
b
2
) = 0
i.e.

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3
= 0 is the condition for the three straight lines to be
concurrent.
147
5.3.4 Equation of a straight line passing through the
intersection of the two given straight lines
Let a
1
x + b
1
y + c
1
= 0 (1)
a
2
x + b
2
y + c
2
= 0 (2)
be the equations of the two given straight lines.
Consider the equation a
1
x + b
1
y + c
1
+ (a
2
x + b
2
y + c
2
) = 0 (3)
where is a constant
Equation (3) is of degree one in x and y and therefore (refer 5.2.4) it
represents a straight line. Let (x
1
, y
1
) be the point of intersection of (1) and (2)
a
1
x
1
+ b
1
y
1
+ c
1
= 0 and a
2
x
1
+ b
2
y
1
+ c
2
= 0
a
1
x
1
+ b
1
y
1
+ c
1
+ (a
2
x
1
+ b
2
y
1
+ c
2
) = 0
Value of (x
1
, y
1
) satisfies equation (3) also.
Hence a
1
x + b
1
y + c
1
+ (a
2
x + b
2
y + c
2
) = 0 represents a straight line
passing through the intersection of the straight lines a
1
x + b
1
y + c
1
= 0 and
a
1
x + b
2
y + c
2
= 0
Example 5.13: Find the angle between the straight lines 3x 2y + 9 = 0 and
2x + y 9 = 0.
Solution:
Slope of the straight line 3x 2y + 9 = 0 is m
1
=
3
2

(
y =
3
2
x +
9
2

Slope of the straight line 2x + y 9 = 0 is m
2
= 2 [ y = 2x + 9]
Suppose is the angle between the given lines, then
= tan
1

m
1
m
2
1 + m
1
m
2

= tan
1

3
2
+ 2
1 +
3
2
( 2)
= tan
1

7
2
2 6
2

= tan
1


7
4
= tan
1

\
|
.
|
7
4

Example 5.14: Show that the straight lines 2x + y 9 = 0 and 2x + y 10 = 0
are parallel.
148
Solution:
Slope of the straight line 2x + y 9 = 0 is m
1
= 2
Slope of the straight line 2x + y 10 = 0 is m
2
= 2 m
1
= m
2

The given straight lines are parallel.
Example 5.15: Show that the two straight lines whose equations are
x + 2y + 5 = 0 and 2x + 4y 5 = 0 are parallel.
Solution:
The two given equations are
x + 2y + 5 = 0 (1)
2x + 4y 5 = 0 (2)
The coefficients of x and y are proportional since
1
2
=
2
4
and therefore they
are parallel.
Note : This can also be done by writing the equation(2) as x + 2y 5/2 = 0
Now the two equations differ by constant alone. They are parallel.
Example 5.16: Find the distance between the parallel lines 2x + 3y 6=0 and
2x + 3y + 7 = 0.
Solution:
The distance between the parallel lines is

c
1
c
2
a
2
+ b
2
.
Here c
1
= 6, c
2
= 7, a = 2, b = 3
The required distance is

6 7
2
2
+ 3
2
=

13
13
= 13 units.
Example 5.17: Show that the straight lines 2x + 3y 9 = 0 and 3x 2y + 10 = 0
are at right angles.
Solution:
Slope of the straight line 2x + 3y 9 = 0 is m
1
=
2
3

Slope of the straight line 3x 2y + 10 = 0 is m
2
=
3
2

m
1
m
2
=
2
3
.
3
2
= 1
The two straight lines are at right angles.
149
Example 5.18: Find the equation of the straight line parallel to 3x + 2y = 9 and
which passes through the point (3, 3).
Solution:
The straight line parallel to 3x + 2y 9 = 0 is of the form
3x + 2y + k = 0 (1)
The point (3, 3) satisfies the equation (1)
Hence 9 6 + k = 0 i.e. k = 3
3x + 2y 3 = 0 is the equation of the required straight line.
Example 5. 19: Find the equation of the straight line perpendicular to the
straight line 3x + 4y + 28 = 0 and passing through the point ( 1, 4).
Solution:
The equation of any straight line perpendicular to 3x + 4y + 28 = 0 is of the
form
4x 3y + k = 0
The point ( 1, 4) lies on the straight line 4x 3y + k = 0
4 12 + k = 0 k = 16
The equation of the required straight line is 4x 3y + 16 = 0
Example 5. 20: Show that the triangle formed by straight lines
4x 3y 18 = 0, 3x 4y + 16 = 0 and x + y 2 = 0 is isosceles.
Solution:
Slope of the straight line 4x 3y 18 = 0 is m
1
=
4
3

Slope of the straight line 3x 4y + 16 = 0 is m
2
=
3
4

Slope of the straight line x + y 2 = 0 is m
3
= 1
Let be the angle between the straight lines 4x 3y 18 = 0 and
3x 4y + 16 = 0
Using the formula, = tan
1

m
1
m
2
1 + m
1
m
2
we get
= tan
1

4
3

3
4
1 +
4
3

3
4
= tan
1

16 9
12
2

= tan
1

7
24
= tan
1

\
|
.
|
7
24

150
Let be the angle between the straight lines 3x 4y+16 = 0 and x + y 2 = 0
= tan
1

3
4
+ 1
1 +
3
4
( 1)
= tan
1

7 / 4
1 / 4

= tan
1
(7)
Let be the angle between the straight lines x+y 2 = 0 and 4x 3y 18= 0
= tan
1

1
4
3
1 + ( 1)
\
|
.
|
4
3
= tan
1


7
3

1
3

= tan
1
(7)
Therefore = The triangle is isosceles.
Example 5.21:Find the point of intersection of the straight lines
5x + 4y 13 = 0 and 3x + y 5 = 0
Solution:
To find the point of intersection, solve the given equations.
Let (x
1
, y
1
) be the point of intersection. Then (x
1
, y
1
) lies on both the
straight lines.
5x
1
+ 4y
1
= 13 (1)
3x
1
+ y
1
= 5 (2)
(2) 4 12x
1
+ 4y
1
= 20 (3)
(1) (3) 7x
1
= 7 x
1
= 1
Substituting x
1
= 1 in equation (1), we get 5 + 4y
1
= 13
4y
1
= 8 y
1
= 2
The point of intersection is (1, 2).
Example 5.22: Find the equation of the straight line passing through the
intersection of the straight lines 2x + y = 8 and 3x y = 2 and through the point
(2, 3)
Solution:
The equation of the straight line passing through the intersection of the
given lines is
2x + y 8 + (3x y 2) = 0 (1)
(2, 3) lies on the equation (1) and hence 4 3 8 + (6 + 3 2) = 0
151
= 1
(1) 2x + y 8 + 3x y 2 = 0 5x 10 = 0
x = 2 is the equation of the required straight line.
Example 5.23: Find the equation of the straight line passing through the
intersection of the straight lines 2x + y = 8 and 3x 2y + 7 = 0 and parallel to 4x
+ y 11 = 0
Solution:
Let (x
1
, y
1
) be the point of intersection of the given straight lines
2x
1
+ y
1
= 8 (1)
3x
1
2y
1
= 7 (2)
(1) 2 4x
1
+ 2y
1
= 16 (3)
(2) + (3) x
1
=
9
7
y
1
=
38
7
(x
1
, y
1
) =
\
|
.
|
9
7
,
38
7

The straight line parallel to 4x + y 11 = 0 is of the form 4x + y + k = 0
But it passes through
\
|
.
|
9
7
,
38
7


36
7
+
38
7
+ k = 0 k =
74
7

4x + y
74
7
= 0
28x + 7y 74 = 0 is the equation of the required straight line.
Example 5.24:
Find the equation of the straight line which passes through the intersection
of the straight lines 5x 6y = 1 and 3x + 2y + 5 = 0 and is perpendicular to the
straight line 3x 5y + 11 = 0
Solution:
The straight line passing through the intersection of the given straight lines is
5x 6y 1 + (3x + 2y + 5) = 0 (1)
(5 + 3)x + ( 6 + 2)y + ( 1 + 5) = 0
This straight line is perpendicular to 3x 5y + 11 = 0
Product of the slopes of the perpendicular straight lines is 1 i.e. m
1
m
2
= 1

\

|
.
|
|
5 + 3
6 + 2

\
|
.
|
3
5
= 1
15 + 9 = 30 + 10 = 45
152
(1) 5x 6y 1 + 45 (3x + 2y + 5) = 0 i.e. 140x + 84y + 224 = 0
i.e. 5x + 3y + 8 = 0 is the equation of the required straight line.
Example 5.25: Show that the straight lines 3x + 4y = 13; 2x 7y + 1 = 0 and
5x y = 14 are concurrent.
Solution:
Let (x
1
, y
1
) be the point of intersection of the first two straight lines
3x
1
+ 4y
1
= 13 (1)
2x
1
7y
1
= 1 (2)
(1) 7 21x
1
+ 28y
1
= 91 (3)
(2) 4 8x
1
28y
1
= 4 (4)
(3) + (4) 29x
1
= 87 x
1
= 3
(1) 9 + 4y
1
= 13 y
1
= 1
The point of intersection of the first two straight lines is (3, 1).
Substitute this value in the equation 5x y = 14
L.H.S. = 5x y
= 15 1 = 14 = R.H.S.
i.e. The point (3, 1) satisfies the third equation.
Hence the three straight lines are concurrent.
Example 5.26: Find the co-ordinates of orthocentre of the triangle formed by
the straight lines
x y 5 = 0, 2x y 8 = 0 and 3x y 9 = 0
Solution:
Let the equations of sides AB, BC
and CA of a ABC be represented by
x y 5 = 0 (1)
2x y 8 = 0 (2)
3x y 9 = 0 (3)
Solving (1) and (3), we get A as (2, 3)

Fig. 5. 7
The equation of the straight line BC is 2x y 8 = 0. The straight line
perpendicular to it is of the form
x + 2y + k = 0 (4)
153
A(2, 3) satisfies the equation (4) 2 6 + k = 0 k = 4
The equation of AD is x + 2y = 4 (5)
Solving the equations (1) and (2), we get B as (3, 2)
The straight line perpendicular to 3x y 9 = 0 is of the form
x + 3y + k = 0
But B(3, 2) lies on this straight line 3 6 + k = 0 k = 3
The equation of BE is x + 3y = 3 (6)
Solving (5) and (6), we get the orthocentre O as ( 6, 1).
Example 5.27: For what values of a, the three straight lines 3x + y + 2 = 0,
2x y + 3 = 0 and x + ay 3 = 0 are concurrent?
Solution:
Let (x
1
, y
1
) be the point of concurrency. This point satisfies the first two
equations.
3x
1
+ y
1
+ 2 = 0 (1)
2x
1
y
1
+ 3 = 0 (2)
Solving (1) and (2) we get ( 1, 1) as the point of intersection. Since it is a
point of concurrency, it lies on x + ay 3 = 0.
1 + a 3 = 0
i.e. a = 4
EXERCISE 5.3
(1) Find the angle between the straight lines 2x + y = 4 and x + 3y = 5
(2) Show that the straight lines 2x + y = 5 and x 2y = 4 are at right angles.
(3) Find the equation of the straight line passing through the point (1, 2)
and parallel to the straight line 3x + 2y 7 = 0
(4) Find the equation of the straight line passing through the point (2, 1)
and perpendicular to the straight line x + y = 9
(5) Find the point of intersection of the straight lines 5x + 4y 13 = 0
and 3x + y 5 = 0
(6) If the two straight lines 2x 3y + 9 = 0, 6x + ky + 4 = 0 are parallel,
find k
(7) Find the distance between the parallel lines
2x + y 9 = 0 and 4x + 2y + 7 = 0
(8) Find the values of p for which the straight lines 8px + (2 3p) y + 1 = 0
and px + 8y 7 = 0 are perpendicular to each other.
154
(9) Find the equation of the straight line which passes through the
intersection of the straight lines 2x + y = 8 and 3x 2y + 7 = 0 and is
parallel to the straight line 4x + y 11 = 0
(10) Find the equation of the straight line passing through intersection of the
straight lines 5x 6y = 1 and 3x + 2y + 5 = 0 and perpendicular to the
straight line 3x 5y + 11 = 0
(11) Find the equation of the straight line joining (4, 3) and the
intersection of the straight lines 2x y + 7 = 0 and x + y 1 = 0
(12) Find the equation of the straight line joining the point of the intersection
of the straight lines 3x + 2y + 1 = 0 and x + y = 3 to the point of
intersection of the straight lines y x = 1 and 2x + y + 2 = 0
(13) Show that the angle between 3x + 2y = 0 and 4x y = 0 is equal to the
angle between 2x + y = 0 and 9x + 32y = 41
(14) Show that the triangle whose sides are y = 2x + 7, x 3y 6 = 0 and
x + 2y = 8 is right angled. Find its other angles.
(15) Show that the straight lines 3x + y + 4 = 0, 3x + 4y 15 = 0 and
24x 7y 3 = 0 form an isosceles triangle.
(16) Show that the straight lines 3x + 4y=13; 2x 7y + 1 = 0 and 5x y = 14
are concurrent.
(17) Find a so that the straight lines x 6y + a = 0, 2x + 3y + 4 = 0 and
x + 4y + 1 = 0 may be concurrent.
(18) Find the value of a for which the straight lines
x + y 4 = 0, 3x + 2 = 0 and x y + 3a = 0 are concurrent.
(19) Find the co-ordinates of the orthocentre of the triangle whose vertices
are the points ( 2, 1), (6, 1) and (2, 5)
(20) If ax + by + c = 0, bx + cy + a = 0 and cx + ay + b = 0 are concurrent,
show that a
3
+ b
3
+ c
3
= 3abc
(21) Find the co-ordinates of the orthocentre of the triangle formed by the
straight lines x + y 1 = 0, x + 2y 4 = 0 and x + 3y 9 = 0
(22) The equation of the sides of a triangle are x + 2y = 0, 4x + 3y = 5 and
3x + y = 0. Find the co-ordinates of the orthocentre of the triangle.
5.4 Pair of straight lines
5.4.1 Combined equation of the pair of straight lines
We know that any equation of first degree in x and y represents a straight line.
Let l
1
x + m
1
y + n
1
= 0 and l
2
x + m
2
y + n
2
= 0 be the individual equations of any
two straight lines. Then their combined equation is
(l
1
x + m
1
y + n
1
) (l
2
x + m
2
y + n
2
) = 0
155
l
1
l
2
x
2
+ (l
1
m
2
+ l
2
m
1
) xy + m
1
m
2
y
2
+(l
1
n
2
+ l
2
n
1
)x + (m
1
n
2
+ m
2
n
1
)y + n
1
n
2
= 0
Hence the equation of a pair of straight lines may be taken in the form
ax
2
+ 2hxy + by
2
+ 2gx + 2fy + c = 0, where a, b, c, f, g, h are constants.
5.4.2 Pair of straight lines passing through the origin
The homogeneous equation ax
2
+ 2hxy + by
2
= 0 of second degree in
x and y represents a pair of straight lines passing through the origin.
Considering ax
2
+ 2hxy + by
2
= 0 as a quadratic equation in x, we get
x =
2hy
4h
2
y
2
4aby
2
2a

=

(
(
2h 2 h
2
ab
2a
y =
h h
2
ab
a
y
ax = ( ) h h
2
ab y
i.e. ax + ( ) h + h
2
ab y = 0 and ax + ( ) h h
2
ab y = 0 are the
two straight lines, each passing through the origin. Hence ax
2
+ 2hxy + by
2
= 0
represents a pair of straight lines intersecting at the origin.
Note : The straight lines are (1) real and distinct if h
2
> ab
(2) coincident if h
2
= ab
(3) imaginary if h
2
< ab
Sum and product of the slopes of pair of straight lines
The homogeneous equation ax
2
+ 2hxy + by
2
= 0 of second degree in x and
y represents a pair of straight lines passing through the origin.
Let y = m
1
x and y = m
2
x be the two straight lines passing through the
origin. Therefore the combined equation is (y m
1
x) (y m
2
x) = 0
m
1
m
2
x
2
(m
1
+ m
2
) xy + y
2
= 0
This equation also represents a pair of straight lines passing through the
origin.
Equating the co-efficients of like terms in the above equations, we get

m
1
m
2
a
=
(m
1
+ m
2
)
2h
=
1
b

m
1
m
2
=
a
b
; i.e. Product of the slopes =
a
b

m
1
+ m
2
=
2h
b
i.e. Sum of the slopes =
2h
b

156
5.4.3 Angle between pair of straight lines passing through the
origin
The equation of the pair of straight lines passing through the origin is
ax
2
+ 2hxy + by
2
= 0 (1)
m
1
+ m
2
=
2h
b
and m
1
m
2
=
a
b

Let be the angle between the pair of straight lines.
tan =

m
1
m
2
1 + m
1
m
2

tan =

(
(

(m
1
+ m
2
)
2
4m
1
m
2
1 + m
1
m
2

=

(
(
(

4h
2
b
2

4a
b
1 +
a
b
=

(
(
(

4h
2
4ab
b
2
a + b
b

tan =

(
(
2 h
2
ab
a + b

= tan
1

(
(
2 h
2
ab
a + b
i.e. = tan
1

2 h
2
ab
a + b

It is conventional to take to be acute.
Corollary (1):
If is the angle between the pair of straight lines
ax
2
+ 2hxy + by
2
+ 2gx + 2fy + c = 0
then = tan
1

2 h
2
ab
a + b

It is same as the angle between the pair of straight lines
ax
2
+ 2hxy + by
2
= 0 passing through the origin.
Corollary (2): If the straight lines are parallel, then h
2
= ab
[since = 0, tan = 0]
Corollary (3): If the straight lines are perpendicular then
coeff. of x
2
+ coeff. of y
2
= 0 [since = 90, tan = ]
157
The condition for a general second degree equation
ax
2
+ 2hxy + by
2
+ 2gx + 2fy + c = 0 to represent a pair of straight lines
is abc + 2fgh af
2
bg
2
ch
2
= 0
Assume that ax
2
+ 2hxy + by
2
+ 2gx + 2fy + c = 0 (1)
represents a pair of straight lines. Treating this equation as a quadratic in x,
this can be written as ax
2
+ 2(hy + g)x + (by
2
+ 2fy + c) = 0
By solving for x,we get
x =
(hy + g) (hy + g)
2
a(by
2
+ 2fy + c)
a

ax + hy + g = (hy + g)
2
a(by
2
+ 2fy + c)
= (h
2
ab)y
2
+ 2(gh af)y + (g
2
ac)
Now in order that each of these equations may be of the first degree in
x and y, the expression in the R.H.S should be a perfect square. This is possible
only if the discriminant of this quadratic in y under the radical or within the
root is zero.
(h
2
ab) (g
2
ac) = (gh af)
2

Simplifying this we get abc + 2fgh af
2
bg
2
ch
2
= 0 which is the
required condition.
Example 5.28: Find the angle between the straight lines x
2
+ 4xy + 3y
2
= 0
Solution:
Here a = 1, 2h = 4, b = 3
If is the angle between the given straight lines, then
= tan
1

(
(
2 h
2
ab
a + b
= tan
1

(
( 2 4 3
4
= tan
1

\
|
.
|
1
2

Example 5.29: The slope of one of the straight lines of ax
2
+ 2hxy + by
2
= 0 is
thrice that of the other, show that 3h
2
= 4ab
Solution:
Let m
1
and m
2
be the slopes of pair of straight lines.
Then m
1
+ m
2
=
2h
b
, m
1
m
2
=
a
b

It is given that m
2
= 3m
1

m
1
+ 3m
1
=
2h
b
m
1
=
h
2b

158
But m
1
. 3m
1
=
a
b
3m
1
2
=
a
b
3
\
|
.
|
h
2b
2
=
a
b


3h
2
4b
2
=
a
b

3h
2
= 4ab
Example 5.30: Show that x
2
y
2
+ x 3y 2 = 0 represents a pair of straight
lines. Also find the angle between them.
Solution:
The given equation is
x
2
y
2
+ x 3y 2 = 0 (1)
Comparing this with ax
2
+ 2hxy + by
2
+ 2gx + 2fy + c = 0 we get a = 1,
h = 0, b = 1, g =
1
2
, f =
3
2
, c = 2. Condition for the given equation to
represent a pair of straight lines is abc+2fghaf
2
bg
2
ch
2
= 0
abc+2fghaf
2
bg
2
ch
2
= (1)(1)(2)+2
\
|
.
|

3
2

\
|
.
|
1
2
(0)(1)
\
|
.
|
9
4
1)
\
|
.
|
1
4
(2) (0)
= 2
9
4
+
1
4
=
8 9 + 1
4

= 0
Hence the given equation represents a pair of straight lines.
Since a + b = 1 1 = 0, the angle between the straight lines is 90.
Example 5.31: Show that the equation 3x
2
+ 7xy + 2y
2
+ 5x + 5y + 2 = 0
represents a pair of straight lines and also find the separate equation of the
straight lines.
Solution:
Comparing the given equation with ax
2
+ 2hxy + by
2
+ 2gx + 2fy + c = 0,
we get
a = 3, b = 2, h =
7
2
, g =
5
2
, f =
5
2
, c = 2. The condition for the given
equation to represent a pair of straight lines is abc + 2fgh af
2
bg
2
ch
2
= 0
abc+2fghaf
2
bg
2
ch
2
= (3) (2) (2) + 2
\
|
.
|
5
2

\
|
.
|
5
2

\
|
.
|
7
2
3
\
|
.
|
25
4
2
\
|
.
|
25
4
2
\
|
.
|
49
4

= 12 +
175
4

75
4

50
4

98
4
= 0
159
Hence the given equation represents a pair of straight lines.
Now, factorising the second degree terms
we get 3x
2
+ 7xy + 2y
2
= (x + 2y) (3x + y)
Let 3x
2
+ 7xy + 2y
2
+ 5x + 5y + 2 = (x + 2y + l) (3x + y + m)
Comparing the coefficient of x, 3l + m = 5 ;
Comparing the coefficient of y, l + 2m = 5
Solving these two equations, we get l = 1, m = 2
The separate equations are x + 2y + 1 = 0 and 3x + y + 2 = 0
Example 5.32: Show that the equation 4x
2
+ 4xy + y
2
6x 3y 4 = 0
represents a pair of parallel lines and find the distance between them.
Solution:
The given equation is 4x
2
+ 4xy + y
2
6x 3y 4 = 0
Here a = 4, h = 2, b = 1 ; ab h
2
= 4(1) 2
2
= 4 4 = 0
The given equation represents a pair of parallel straight lines.
Now 4x
2
+ 4xy + y
2
= (2x + y)
2

4x
2
+ 4xy + y
2
6x 3y 4 = (2x + y + l) (2x + y + m)
Comparing the coefficient of x, 2l + 2m = 6 i.e. l + m = 3 (1)
Comparing the constant term, lm = 4 (2)
l +
\
|
.
|
4
l
= 3 l
2
+ 3l 4 = 0
i.e. (l + 4) (l 1) = 0 l = 4, 1
Now lm = 4 m = 1, 4
The separate equations are 2x + y 4 = 0 and 2x + y + 1 = 0
The distance between them is
| c
1
c
2
|
a
2
+ b
2
=

4 1
2
2
+ 1
2
= 5 units
Example 5.33: Find the combined equation of the straight lines whose separate
equations are x + 2y 3 = 0 and 3x y + 4 = 0
Solution:
The combined equation of the given straight lines is
(x + 2y 3) (3x y + 4) = 0
i.e. 3x
2
+ 6xy 9x xy 2y
2
+ 3y + 4x + 8y 12 = 0
i.e. 3x
2
+ 5xy 2y
2
5x + 11y 12 = 0 is the required combined
equation.
160
EXERCISE 5.4
(1) If the equation ax
2
+ 3xy 2y
2
5x + 5y + c = 0 represents a pair of
perpendicular straight lines, find a and c.
(2) Find the angle between the pair of straight lines given by
(a
2
3b
2
) x
2
+ 8ab xy + (b
2
3a
2
)y
2
= 0
(3) Show that if one of the angles between pair of straight lines
ax
2
+ 2hxy + by
2
=0 is 60 then (a + 3b) (3a + b) = 4h
2

(4) Show that 9x
2
+ 24xy + 16y
2
+ 21x + 28y + 6 = 0 represents a pair of
parallel straight lines and find the distance between them.
(5) The slope of one of the straight lines ax
2
+ 2hxy + by
2
= 0 is twice that
of the other, show that 8h
2
= 9ab.
(6) Find the combined equation of the straight lines through the origin, one
of which is parallel to and the other is perpendicular to the straight line
2x + y + 1 = 0
(7) Find the combined equation of the straight lines whose separate
equations are x + 2y 3 = 0 and 3x + y + 5 = 0
(8) Find k such that the equation 12x
2
+ 7xy 12y
2
x + 7y + k = 0
represents a pair of straight lines. Find the separate equations of the
straight lines and also the angle between them.
(9) If the equation 12x
2
10xy + 2y
2
+ 14x 5y + c = 0 represents a pair of
straight lines, find the value of c. Find the separate equations of the
straight lines and also the angle between them.
(10) For what value of k does 12x
2
+ 7xy + ky
2
+ 13x y + 3 = 0 represents a
pair of straight lines? Also write the separate equations.
(11) Show that 3x
2
+ 10xy + 8y
2
+ 14x + 22y + 15 = 0 represents a pair of
straight lines and the angle between them is tan
1

\
|
.
|
2
11

5.5 Circle
Definition: A circle is the locus of a point which moves in such a way that
its distance from a fixed point is always constant. The fixed point is called the
centre of the circle and the constant distance is called the radius of the circle.
161
5.5.1 The equation of a circle when the centre and radius are given
Let C(h, k) be the centre and r be the
radius of the circle. Let P(x, y) be any point
on the circle
CP = r CP
2
= r
2
(x h)
2
+ (yk)
2
= r
2

is the required equation of the circle.
Note :
If the centre of the circle is at the origin,
i.e. (h, k) = (0, 0) then the equation of the
circle is x
2
+ y
2
= r
2
.

Fig. 5.8
5.5.2 The equation of a circle if the end points of a diameter are
given
Let A(x
1
, y
1
) and B(x
2
, y
2
) be the end
points of a diameter. Let P(x, y) be any point
on the circle.
The angle in a semi circle is a right angle.
PA is perpendicular to PB
(Slope of PA) (Slope of PB) = 1

\

|
.
|
|
y y
1
x x
1

\

|
.
|
|
y y
2
x x
2
= 1
Fig. 5.9.
(y y
1
) (y y
2
) = (x x
1
) (x x
2
)
(x x
1
) (x x
2
) + (y y
1
) (y y
2
) = 0 is the required equation of the
circle.
5.5.3 The general equation of the circle is x
2
+ y
2
+ 2gx + 2fy + c = 0
Consider the equation x
2
+ y
2
+ 2gx + 2fy + c= 0
This can be written as x
2
+ 2gx + g
2
+ y
2
+ 2fy + f
2
= g
2
+ f
2
c
(x + g)
2
+ (y + f)
2
= ( ) g
2
+ f
2
c
2

[x ( g)]
2
+ [y ( f)]
2
= ( ) g
2
+ f
2
c
2

This is of the form (x h)
2
+ (y k)
2
= r
2

The considered equation represents a circle with centre ( g, f) and
radius g
2
+ f
2
c
The general equation of the circle is x
2
+ y
2
+ 2gx + 2fy + c = 0
162
Note : The general second degree equation ax
2
+by
2
+ 2hxy + 2gx + 2fy + c = 0
represents a circle if (1) a = b i.e. coefficient of x
2
= coefficient of y
2

(2) h = 0 i.e. no xy term
5.5.4 Parametric form
Consider a circle with radius r and
centre at the origin. Let P(x, y) be any point
on the circle. Assume that OP makes an angle
with the positive direction of x-axis. Draw
the perpendicular PM to the x-axis.
From the figure (5.10),
x
r
= cos,
y
r
= sin.

Fig. 5.10
Here x and y are the co-ordinates of any point on the circle. Note that
these two co-ordinates depend on .
The value of r is fixed. The equations x = r cos, y = r sin are called
the parametric equations of the circle x
2
+ y
2
= r
2
. Here is called the
parameter and 0 2
Another parametric form:
We know that sin =
2 tan

2
1 + tan
2

2
; cos =
1 tan
2

2
1 + tan
2

2

Let t = tan

2

If 0 2 then < t <
x = r cos x =
r(1 t
2
)
1 + t
2
; y = r sin y =
2rt
1 + t
2

Thus x =
r(1 t
2
)
1 + t
2
, y =
2rt
1 + t
2
, < t < is another parametric
equation of the circle x
2
+ y
2
= r
2

Clearly x =
r(1 t
2
)
1 + t
2
, y =
2rt
1 + t
2
satisfy the equation x
2
+ y
2
= r
2

Example 5.34: Find the equation of the circle if the centre and radius are
(2, 3) and 4 respectively.
163
Solution:
The equation of the circle is (x h)
2
+ (y k)
2
= r
2

Here (h, k) = (2, 3) and r = 4 (x 2)
2
+ (y + 3)
2
= 4
2

i.e. x
2
+ y
2
4x + 6y 3 = 0 is the required equation of the circle.
Example 5.35: Find the equation of the circle if (2, 3) and (3, 1) are the
extremities of a diameter.
Solution:
The equation of the circle is (x x
1
) (x x
2
) + (y y
1
) (y y
2
) = 0
Here (x
1
, y
1
) = (2, 3) and (x
2
, y
2
) = (3, 1)
(x 2) (x 3) + (y + 3) (y 1) = 0
x
2
5x + 6 + y
2
+ 2y 3 = 0
The required equation is x
2
+ y
2
5x + 2y + 3 = 0
Example 5.36: Find the centre and radius of the circle x
2
+ y
2
+ 2x 4y + 3 = 0
Solution:
The general equation of the circle is x
2
+ y
2
+ 2gx + 2fy + c = 0
Here 2g = 2, 2f = 4, c = 3
centre is ( g, f) = (1, 2)
radius is g
2
+ f
2
c = 1 + 4 3 = 2 units.
Example 5.37: Find the centre and radius of the circle 3x
2
+3y
2
2x+6y 6 = 0
Solution:
The given equation is 3x
2
+ 3y
2
2x + 6y 6 = 0
Rewriting the above, x
2
+ y
2

2
3
x + 2y 2 = 0
Comparing this with the general equation x
2
+ y
2
+ 2gx + 2fy + c = 0
We get 2g =
2
3
, 2f = 2, c = 2
centre is ( g, f) =
\
|
.
|
1
3
, 1
radius is g
2
+ f
2
c =
1
9
+ 1 + 2 =
2 7
3
units.
Example 5.38: If (4, 1) is one extremity of a diameter of the circle
x
2
+ y
2
2x + 6y 15 = 0, find the other extremity.
164
Solution:
Comparing x
2
+ y
2
2x + 6y 15 = 0 with
the general equation of the circle,
we get 2g = 2 2f = 6
centre is C ( g, f) = (1, 3)
Let B(x
1
, y
1
) be the other extremity and
A be (4, 1)

Fig. 5.11
C is the mid point of AB

x
1
+ 4
2
= 1,
y
1
+ 1
2
= 3 x
1
= 2, y
1
= 7
The other extremity is ( 2, 7)
Example 5.39: Find the equation the circle passing through the points
(0,1), (2,3) and (2, 5).
Solution:
The general equation of the circle is x
2
+ y
2
+ 2gx + 2fy + c = 0
The points (0, 1), (2, 3) and ( 2, 5) lie on the circle
2 f + c = 1 (1)
4g + 6f + c = 13 (2)
4g + 10f + c = 29 (3)
(1) (2) 4g 4f = 12
g + f = 3 (4)
(2) (3) 8g 4f = 16
2g f = 4 (5)
(4) + (5) 3g = 1 g =
1
3

(4) f = 3
1
3
=
10
3

(1) c =
17
3

x
2
+ y
2
+ 2
\
|
.
|
1
3
x + 2
\
|
.
|

10
3
y +
17
3
= 0
3x
2
+ 3y
2
+ 2x 20y + 17 = 0 is the required equation.
Example 5.40: Find the equation of the circle passing through the points
(0, 1), (2, 3) and having the centre on the line x 2y + 3 = 0
165
Solution:
The general equation of the circle is
x
2
+ y
2
+ 2gx + 2fy + c = 0
(0, 1) lies on the circle 2f + c = 1 (1)
(2, 3) lies on the circle 4g + 6f + c = 13 (2)
The centre ( g, f) lies on x 2y + 3 = 0 ;
g + 2f = 3 (3)
(1) (2) 4g 4f = 12
i.e. g + f = 3 (4)
(3) + (4) 3f = 6 f = 2
(3) g = 1
(1) c = 3
The required equation is x
2
+ y
2
2x 4y + 3 = 0
Example 5.41:
Find the values of a and b if the equation
(a 4)x
2
+ by
2
+ (b 3)xy + 4x + 4y 1 = 0 represents a circle.
Solution:
The given equation is (a 4)x
2
+ by
2
+ (b 3)xy + 4x + 4y 1 = 0
(i) coefficient of xy = 0 b 3 = 0 b = 3
(ii) coefficient of x
2
= co-efficient of y
2
a 4 = b
a = 7
Thus a = 7, b = 3
Example 5.42: Find the equation of the circle with centre (2, 3) and radius 3.
Show that it passes through the point (2, 0).
Solution:
If the centre is (h, k) and radius is r, then the equation of the circle is
(xh)
2
+ (yk)
2
= r
2
.
Here (h, k) = (2, 3) and r = 3.
(x 2)
2
+ (y + 3)
2
= 3
2

(x 2)
2
+ (y + 3)
2
= 9 is the required equation of the circle.
Putting (2, 0) in the equation of the circle, we get
L.H.S. = (2 2)
2
+ (0 + 3)
2
= 0 + 9 = 9 = R.H.S.
Hence the circle passes through (2, 0)
166
Example 5.43:
Find the equation of the circle with centre (1, 2) and passing through the
point (4, 1)
Solution:
Let C be (1, 2) and P be (4, 1)
Radius r = CP = (1 4)
2
+ ( 2 1)
2
= 9 + 9 = 18
Thus the equation of the circle is (x h)
2
+(yk)
2
= r
2
= r
2

(x 1)
2
+ (y + 2)
2
= 18
2


Fig. 5.12
i.e. x
2
+ y
2
2x + 4y 13 = 0 is the required equation.
Example 5.44: Find the parametric equations of the circle x
2
+ y
2
= 16
Solution:
Here r
2
= 16 r = 4 . The parametric equations of the circle
x
2
+ y
2
= r
2
in parameter are x = r cos, y = r sin
The parametric equations of the given circle x
2
+ y
2
= 16 are
x = 4 cos , y = 4 sin , 0 2
Example 5.45: Find the cartesian equation of the circle whose parametric
equations are
x = 2 cos , y = 2 sin , 0 2
Solution:
To find the caretsian equation of the circle, eliminate the parameter
from the given equations, cos =
x
2
; sin =
y
2

cos
2
+ sin
2
= 1
\
|
.
|
x
2

2
+
\
|
.
|
y
2

2
= 1
x
2
+ y
2
= 4 is the required cartesian equation of the circle.
EXERCISE 5.5
(1) Find the centre and radius of the following circles:
(i) x
2
+ y
2
= 1 (ii) x
2
+ y
2
4x 6y 9 = 0
(iii) x
2
+ y
2
8x 6y 24 = 0 (iv) 3x
2
+ 3y
2
+ 4x 4y 4 = 0
(v) (x 3) (x 5) + (y 7) (y 1) = 0
(2) For what values of a and b does the equation
(a 2)x
2
+ by
2
+ (b 2)xy + 4x + 4y 1 = 0 represents a circle? Write
down the resulting equation of the circle.
(3) Find the equation of the circle passing through the point (1, 2) and
having its centre at (2, 3).
167
(4) x + 2y = 7, 2x + y = 8 are two diameters of a circle with radius 5 units.
Find the equation of the circle.
(5) The area of a circle is 16 square units. If the centre of the circle is
(7, 3), find the equation of the circle.
(6) Find the equation of the circle whose centre is ( 4, 5) and
circumference is 8 units.
(7) Find the circumference and area of the circle x
2
+ y
2
6x 8y + 15 = 0
(8) Find the equation of the circle which passes through (2, 3) and whose
centre is on x-axis and radius is 5 units.
(9) Find the equation of the circle described on the line joining the points
(1, 2) and (2, 4) as its diameter.
(10) Find the equation of the circle passing through the points (1, 0), (0, 1)
and (0, 1).
(11) Find the equation of the circle passing through the points (1, 1), (2, 1)
and (3, 2).
(12) Find the equation of the circle that passes through the points (4, 1) and
(6, 5) and has its centre on the line 4x + y = 16.
(13) Find the equation of the circle whose centre is on the line x = 2y and
which passes through the points ( 1, 2) and (3, 2).
(14) Find the cartesian equation of the circle whose parametric equations are
x =
1
4
cos, y =
1
4
sin and 0 2
(15) Find the parametric equation of the circle 4x
2
+ 4y
2
= 9
5.6. Tangent
5.6.1 Introduction
Let us consider a circle with centre at C and a straight line AB. This
straight line can be related to the circle in 3 different positions as shown in the
following figures.

Fig. 5.13
168
In figure (5.13 a), the straight line AB does not touch or intersect the circle.
In figure (5.13 b), the straight line AB intersects the circle in two points
and it is called a secant.
In figure (5.13 c), the straight line AB touches the circle at exactly one
point, and it is called a tangent. In otherwords, the limiting form of a secant is
called a tangent (Fig. 5.13d)
Definition : A tangent to a circle is a straight line which intersects
(touches) the circle in exactly one point.
5.6.2 Equation of the tangent to a circle at a point (x
1
, y
1
)
Let the equation of the circle be
x
2
+ y
2
+ 2gx + 2fy + c = 0 (1)
Let P(x
1
, y
1
) be a given point on it.
x
1
2
+ y
1
2
+ 2gx
1
+ 2fy
1
+ c = 0 (2)
Let PT be the tangent at P.
The centre of the circle is C( g, f).

Fig. 5.14
Slope of the CP =
y
1
+ f
x
1
+ g

Since CP is perpendicular to PT, slope of PT =
\

|
.
|
|
x
1
+ g
y
1
+ f

Equation of the tangent PT is y y
1
= m(x x
1
)
y y
1
=
\

|
.
|
|
x
1
+ g
y
1
+ f
(x x
1
)
(y y
1
) (y
1
+ f) = (x x
1
) (x
1
+ g)
(y y
1
) (y
1
+ f) + (x x
1
) (x
1
+ g) = 0
yy
1
y
1
2
+ fy fy
1
+ [xx
1
x
1
2
+ gx gx
1
] = 0
xx
1
+ yy
1
+ fy + gx = x
1
2
+ y
1
2
+ gx
1
+ fy
1

Add gx
1
+ fy
1
+ c on both sides
xx
1
+ yy
1
+ gx + gx
1
+ fy + fy
1
+ c = x
1
2
+ y
1
2
+ 2gx
1
+ 2fy
1
+ c
xx
1
+ yy
1
+ g(x + x
1
) + f(y + y
1
) + c = 0 is the required equation of the
tangent at (x
1
, y
1
)
169
Corollary:
The equation of the tangent at (x
1
, y
1
) to the circle x
2
+ y
2
= a
2
is
xx
1
+ yy
1
= a
2
.
Note: To get the equation of the tangent at (x
1
, y
1
), replace x
2
as xx
1
,
y
2
as yy
1
, x as
x + x
1
2
and y as
y + y
1
2
in the equation of the circle.
5.6.3 Length of the tangent to the circle from a point (x
1
, y
1
)
Let the equation of the circle be
x
2
+ y
2
+ 2gx + 2fy + c = 0
Let PT be the tangent to the circle from
P(x
1
, y
1
) outside it. We know that the
co-ordinate of the centre C is ( g, f) and
radius r = CT = g
2
+ f
2
c


Fig. 5.15
From the right angled triangle PCT,
PT
2
= PC
2
CT
2

= (x
1
+ g)
2
+ (y
1
+ f)
2
(g
2
+ f
2
c)
= x
1
2
+ 2gx
1
+ g
2
+ y
1
2
+ 2fy
1
+ f
2
g
2
f
2
+ c
= x
1
2
+ y
1
2
+ 2gx
1
+ 2fy
1
+ c
PT = x
1
2
+ y
1
2
+ 2gx
1
+ 2fy
1
+ c , which is
the length of the tangent from the point (x
1
, y
1
)
to the circle x
2
+ y
2
+ 2gx + 2fy + c = 0
Note : (1) If the point P is on the circle then PT
2
= 0 (PT is zero).
(2) If the point P is outside the circle then PT
2
> 0 (PT is real)
(3) If the point P is inside the circle then PT
2
< 0 (PT is imaginary)
Corollary:
The constant c will be positive if the origin is outside the circle, zero if it is
on the circle and negative if it is inside the circle.
5.6.4 The condition for the line y = mx + c to be a tangent to the
circle x
2
+ y
2
= a
2

Let the line y = mx + c be a tangent to the circle x
2
+ y
2
= a
2
at (x
1
, y
1
)
But the equation of the tangent at (x
1
, y
1
) to the circle
x
2
+ y
2
= a
2
is xx
1
+ yy
1
= a
2

170
Thus the equations y = mx + c and xx
1
+ yy
1
= a
2
are representing the same
straight line and hence their coefficients are proportional.

1
y
1
=
m
x
1
=
c
a
2

x
1
=
a
2
m
c
, y
1
=
a
2
c

But (x
1
, y
1
) is a point on the circle x
2
+ y
2
= a
2

x
1
2
+ y
1
2
= a
2

a
4
m
2
c
2
+
a
4
c
2
= a
2

a
2
m
2
+ a
2
= c
2
a
2
(m
2
+ 1) = c
2

i.e. c
2
= a
2
(1 + m
2
) is the required condition.
Note:(1)The point of contact of the tangent y = mx + c to the circle x
2
+y
2
= a
2
is

(
(
am
1 + m
2
,
a
1 + m
2

(2) The equation of any tangent to a circle is of the form
y = mx a 1 + m
2

5.6.5 Two tangents can be drawn from a point to a circle
Let (x
1
, y
1
) be the given point. We know that y = mx a 1 + m
2
is the
equation of any tangent. It passes through (x
1
, y
1
).
y
1
= mx
1
a 1 + m
2

y
1
mx
1
= a 1 + m
2

(y
1
mx
1
)
2
= a
2
(1 + m
2
)
y
1
2
+ m
2
x
1
2
2mx
1
y
1
a
2
a
2
m
2
= 0
m
2
(x
1
2
a
2
) 2mx
1
y
1
+ (y
1
2
a
2
) = 0
This is a quadratic equation in m. Thus m has two values. But m is the
slope of the tangent. Thus two tangents can be drawn from a point to a circle.
Note : (1) If (x
1
, y
1
) is an exterior point (lies outside) then both the tangents
are real and visible
171
(2) If (x
1
, y
1
) is an interior point (lies inside) the circle then both the
tangents are imaginary and hence not visible.
(3) If (x
1
, y
1
) is a boundary point (lies on) then both the tangents
coincide and appears to be one.
5.6.6. Equation of the chord of contact of tangents from a point
to the circle
The general equation of the circle is
x
2
+ y
2
+ 2gx + 2fy + c = 0 (1)
Let P(x
1
, y
1
) be a point outside the circle.
Let the tangents from P(x
1
, y
1
) touch the
circle at Q(x
2
, y
2
) and R(x
3
, y
3
)


Fig. 5.16
The equation of the tangent PQ at Q (x
2
, y
2
) is
xx
2
+ yy
2
+ g(x + x
2
) + f(y + y
2
) + c = 0 (2)
The equation of the tangent PR at R(x
3
, y
3
) is
xx
3
+ yy
3
+ g(x + x
3
) + f(y + y
3
) + c = 0 (3)
But (x
1
, y
1
) satisfy the equations (2) and (3)
x
1
x
2
+ y
1
y
2
+ g(x
1
+ x
2
) + f(y
1
+ y
2
) + c = 0 and (4)
x
1
x
3
+ y
1
y
3
+ g(x
1
+ x
3
) + f(y
1
+ y
3
) + c = 0 (5)
But equations (4) and (5) show that (x
2
, y
2
) and (x
3
, y
3
) lie on the line
xx
1
+ yy
1
+ g(x + x
1
) + f(y + y
1
) + c = 0
Hence the straight line xx
1
+ yy
1
+ g(x + x
1
) + f(y + y
1
) + c = 0 represents
the equation of QR, chord of contact of tangents from (x
1
, y
1
).
Example 5.46: Find the length of the tangent from (2, 3) to the circle
x
2
+ y
2
4x3y + 12 = 0.
Solution:
The length of the tangent to the circle x
2
+ y
2
+ 2gx + 2fy + c = 0 from the
point (x
1
, y
1
) is x
1
2
+ y
1
2
+ 2gx
1
+ 2fy
1
+ c
Length of the tangent to the given circle is x
1
2
+ y
1
2
4x
1
3y
1
+ 12
= 2
2
+ 3
2
4.2 3.3 + 12
= 4 + 9 8 9 + 12
= 8 = 2 2 units
172
Example 5.47: Show that the point (2, 3) lies inside the circle
x
2
+ y
2
6x 8y + 12 = 0.
Solution:
The length of the tangent PT from P(x
1
, y
1
) to the circle
x
2
+ y
2
+ 2gx +2fy + c = 0 is
PT = x
1
2
+ y
1
2
+ 2gx
1
+ 2fy
1
+ c
PT
2
= 2
2
+ 3
2
6.2 8.3 + 12 = 4 + 9 12 24 + 12
= 11 < 0
The point (2, 3) lies inside the circle
Example 5.48: Find the equation of the tangent to the circle x
2
+y
2
=25 at (4, 3).
Solution:
The equation of the circle is x
2
+ y
2
= 25 .
The equation of the tangent at (x
1
, y
1
) is xx
1
+ yy
1
= 25. Here (x
1
, y
1
) = (4, 3).
The equation of the tangent at (4, 3) is 4x + 3y = 25
Example 5.49: If y=3x+c is a tangent to the circle x
2
+y
2
=9, find the value of c.
Solution:
The condition for the line y = mx + c to be a tangent to
x
2
+ y
2
= a
2
is c = a 1 + m
2

Here a = 3, m = 3
c = 3 10
Example 5.50: Find the equation of the tangent to
x
2
+ y
2
4x + 4y 8 = 0 at ( 2, 2)
Solution:
The equation of the tangent at (x
1
, y
1
) to the given circle is
xx
1
+ yy
1
4
\
|
.
|
x + x
1
2
+ 4
\
|
.
|
y + y
1
2
8 = 0
xx
1
+ yy
1
2 (x + x
1
) + 2(y + y
1
) 8 = 0
At ( 2, 2), the equation of the tangent is
2x 2y 2 (x 2) + 2(y 2) 8 = 0
4x 8 = 0
x + 2 = 0 is the required equation of the tangent.
Example 5.51: Find the length of the chord intercepted by the circle
x
2
+ y
2
2x y + 1 = 0 and the line x 2y = 1.
173
Solution:
To find the end points of the chord, solve the equations of the circle and
the line. Substitute x = 2y + 1 in the equation of the circle.
(2y + 1)
2
+ y
2
2(2y + 1) y + 1 = 0
4y
2
+ 4y + 1 + y
2
4y

2 y + 1 = 0
5y
2
y = 0 y(5y 1) = 0
y = 0 y =
1
5

x = 1 x =
7
5

The two end points are (1, 0) and
\
|
.
|
7
5
,
1
5

Length of the chord =
\
|
.
|
1
7
5
2
+
\
|
.
|
0
1
5
2
=
4
25
+
1
25
=
1
5
units
Example 5.52: Find the value of p if the line 3x + 4y p = 0 is a tangent to the
circle x
2
+ y
2
= 16.
Solution:
The condition for the tangency is c
2
= a
2
(1 + m
2
) .
Here a
2
= 16, m =
3
4
, c =
p
4

c
2
= a
2
(1 + m
2
)
p
2
16
= 16
\
|
.
|
1 +
9
16
= 25
p
2
= 16 25
p = 20
Example 5.53: Find the equation of the circle which has its centre at (2, 3) and
touches the x-axis.
Solution:
Let P be a point on x-axis where it touches the circle.
Given that the centre C is (2, 3) and P is (2, 0)
r = CP = (2 2)
2
+ (3 0)
2
= 3
The equation of the circle is (x h)
2
+ (y k)
2
= r
2


Fig. 5.17
(x 2)
2
+ (y 3)
2
= 3
2

x
2
+ y
2
4x 6y + 4 = 0
174
EXERCISE 5.6
(1) Find the length of the tangent from (1, 2) to the circle
x
2
+ y
2
2x + 4y + 9 = 0
(2) Prove that the tangents from (0, 5) to the circles
x
2
+ y
2
+ 2x 4 = 0 and
x
2
+ y
2
y + 1 = 0 are equal.
(3) Find the equation of the tangent to the circle x
2
+ y
2
4x + 8y 5 = 0 at
(2, 1).
(4) Is the point (7, 11) lie inside or outside the circle x
2
+ y
2
10x = 0?
(5) Determine whether the points ( 2, 1), (0, 0) and (4, 3) lie outside, on
or inside the circle x
2
+ y
2
5x + 2y 5 = 0
(6) Find the co-ordinates of the point of intersection of the line x + y = 2
with the circle x
2
+ y
2
= 4
(7) Find the equation of the tangent lines to the circle x
2
+ y
2
= 9 which are
parallel to 2x + y 3 = 0
(8) Find the length of the chord intercepted by the circle
x
2
+ y
2
14x + 4y + 28 = 0 and the line x 7y + 4 = 0
(9) Find the equation of the circle which has its centre at (5, 6) and touches
(i) x-axis (ii) y-axis
(10) Find the equation of the tangent to x
2
+ y
2
2x 10y + 1 = 0 at ( 3, 2)
(11) Find the equation of the tangent to the circle x
2
+ y
2
= 16 which are
(i) perpendicular and (ii) parallel to the line x + y = 8
(12) Find the equation of the tangent to the circle x
2
+ y
2
4x + 2y 21 = 0
at (1, 4).
(13) Find the value of p so that the line 3x + 4y p = 0 is a tangent to
x
2
+ y
2
64 = 0
(14) Find the co-ordinates of the middle point of the chord which the circle
x
2
+ y
2
+ 2x + y 3 = 0 cuts off by the line y = x 1.
5.7. Family of circles
Concentric circles:
Two or more circles having the same centre are called concentric circles.
Circles touching each other:
Two circles may touch each other either internally or externally. Let C
1
,
C
2
be the centers of the circle and r
1
, r
2
be their radii and P the point of
contact.
175
Case (1):
The two circles touch externally.
The distance between their centres
is equal to the sum of their radii.
(i.e.) C
1
C
2
= r
1
+ r
2

Fig. 5.18

Case (2) The two circles touch
internally:
The distance between their
centres is equal to the difference
of their radii.
C
1
C
2
= C
1
P C
2
P = r
1
r
2


Fig. 5.19
Orthogonal circles:
Definition: Two circles are said to be orthogonal if the tangent at their
point of intersection are at right angles.
Condition for two circles cut orthogonally
Let the two circles be
x
2
+ y
2
+ 2g
1
x + 2f
1
y + c
1
= 0 and
x
2
+ y
2
+ 2g
2
x + 2f
2
y + c
2
= 0 and cut each
other orthogonally.
Fig. 5.20
Let A and B be the centres of the two circles
A is ( g
1
, f
1
) and B is ( g
2
, f
2
) r
1
= g
1
2
+ f
1
2
c
1
and
r
2
= g
2
2
+ f
2
2
c
2

In the right angled triangle APB, AB
2
= AP
2
+ PB
2

i.e. ( g
1
+ g
2
)
2
+ ( f
1
+ f
2
)
2
= g
1
2
+
f1
2
c
1
+ g
2
2
+ f
2
2
c
2

g
1
2
+ g
2
2
2g
1
g
2
+ f
1
2
+ f
2
2
2f
1
f
2
= g
1
2
+ f
1
2
c
1
+
g2
2
+ f
2
2
c
2

2g
1
g
2
2f
1
f
2
= c
1
c
2

i.e. 2g
1
g
2
+ 2f
1
f
2
= c
1
+ c
2

is the required condition for orthogonality.
Example 5.54: Show that the circles x
2
+ y
2
4x + 6y + 8 = 0 and
x
2
+ y
2
10x 6y + 14 = 0 touch each other.
176
Solution:
The given circles are
x
2
+ y
2
4x + 6y + 8 = 0 (1)
and x
2
+ y
2
10x 6y + 14 = 0 (2)
(1) g
1
= 2 f
1
= 3, c
1
= 8. Centre is A(2, 3)
radius r
1
= g
1
2
+ f
1
2
c
1
= 4 + 9 8 = 5
(2) g
2
= 5, f
2
= 3, c
2
= 14. Centre is B(5, 3)
radius r
2
= 25 + 9 14 = 20 = 2 5
Distance between A and B = (2 5)
2
+ ( 3 3)
2

= 9 + 36 = 45 = 3 5
= r
1
+ r
2

The circles touch each other.
Example 5.55: Find the equation of the circle, which is concentric with the
circle
x
2
+ y
2
4x 6y 9 = 0 and passing through the point ( 4, 5).
Solution:
The given circle is x
2
+ y
2
4x 6y 9 = 0
Centre ( g, f) is (2, 3)
The circle passes through the point ( 4, 5).
radius = (2 + 4)
2
+ (3 + 5)
2
= 36 + 64 = 100 = 10
The equation of the circle is (x h)
2
+ (y k)
2
= r
2

Here (h, k) = (2, 3), r = 10
(x 2)
2
+ (y 3)
2
= 10
2

x
2
+ y
2
4x 6y 87 = 0 is the required equation of the circle.
Example 5.56: Prove that the circles x
2
+ y
2
8x + 6y 23 = 0 and
x
2
+ y
2
2x 5y + 16 = 0 are orthogonal.
Solution:
The equations of the circle are
x
2
+ y
2
8x + 6y 23 = 0 (1)
x
2
+ y
2
2x 5y + 16 = 0 (2)
177
(1) g
1
= 4, f
1
= 3, c
1
= 23
(2) g
2
= 1, f
2
=
5
2
, c
2
= 16
Condition for orthogonality is 2g
1
g
2
+ 2f
1
f
2
=c
1
+ c
2

2g
1
g
2
+ 2f
1
f
2
= 2( 4) ( 1) + 2 (3)
\
|
.
|

5
2
= 8 15 = 7
c
1
+ c
2
= 23 + 16 = 7
2g
1
g
2
+ 2f
1
f
2
= c
1
+ c
2

The two circles cut orthogonally and hence they are orthogonal circles.
Example 5.57:
Find the equation of the circle which passes through the point (1, 2) and
cuts orthogonally each of the circles x
2
+ y
2
= 9 and x
2
+ y
2
2x + 8y 7 = 0
Solution:
Let the required equation of the circle be x
2
+ y
2
+ 2gx + 2fy + c = 0 (1)
The point (1, 2) lies on the circle
1 + 4 + 2g + 4f + c = 0
2g + 4f + c = 5 (2)
The circle (1) cuts the circle x
2
+ y
2
= 9 orthogonally.
2g
1
g
2
+ 2f
1
f
2
= c
1
+ c
2

2g(0) + 2f(0) = c 9
c = 9 (3)
Again the circle (1) cuts x
2
+ y
2
2x + 8y 7 = 0 orthogonally.
2g( 1) + 2f(4) = c 7
2g + 8f = 9 7 = 2
g + 4f = 1 (4)
(2) becomes 2g + 4f = 14
g + 2f = 7 (5)
(4) + (5) 6f = 6 f = 1
(5) g 2 = 7 g = 5
The required equation of the circle is x
2
+ y
2
10x 2y + 9 = 0
178
EXERCISE 5.7
(1) Show that the circles x
2
+ y
2
2x + 6y + 6 = 0
and x
2
+ y
2
5x + 6y + 15 = 0 touch each other.
(2) Show that each of the circles x
2
+ y
2
+ 4y 1 = 0, x
2
+ y
2
+ 6x + y + 8 = 0
and x
2
+ y
2
4x 4y 37 = 0 touches the other two.
(3) Find the equation of the circle concentric with the circle
x
2
+ y
2
2x 6y + 4 = 0 and having radius 7.
(4) Find the equation of the circle which is concentric with the circle
x
2
+ y
2
8x + 12y + 15 = 0 and passes through the point (5, 4)
(5) Show that the circle x
2
+ y
2
8x 6y + 21 = 0 is orthogonal to the
circle x
2
+ y
2
2y 15 = 0
(6) Find the circles which cuts orthogonally each of the following circles
(i) x
2
+ y
2
+ 2x + 4y + 1 = 0, x
2
+y
2
4x+3 = 0 and x
2
+ y
2
+ 6y + 5 = 0
(ii) x
2
+ y
2
+ 2x + 17y + 4 = 0, x
2
+ y
2
+ 7x + 6y + 11 = 0
and x
2
+ y
2
x + 22y + 3 = 0
(7) Find the equation of the circle which passes through (1, 1) and cuts
orthogonally each of the circles x
2
+ y
2
+ 5x 5y + 9 = 0 and
x
2
+ y
2
2x + 3y 7 = 0
(8) Find the equation of the circle which passes through (1, 1) and cuts
orthogonally each of the circles x
2
+ y
2
8x 2y + 16 = 0
and x
2
+ y
2
4x 4y 1 = 0


179
6. TRIGONOMETRY
6.1 Introduction:
Trigonometry is one of the oldest branch of Mathematics. The word
trigonometry means triangle measurement. In olden days trigonometry was
mainly used as a tool for use in astronomy. The early Babylonians divided the
circle into 360 equal parts, giving us degrees, perhaps because they thought that
there were 360 days in a year.
The sine function was invented in India, perhaps around 300 to 400 A.D.
By the end of ninth century, all six trigometric functions and identities relating
them were known to the Arabs.
In its earlier stages trigonometry was mainly concerned with establishing
relations between the sides and angles of a triangle, but now it finds its
application in various branches of science such as surveying, engineering,
navigation etc. For every branch of higher Mathematics a knowledge of
trigonometry is essential.
6.1.1 Angles:
An angle is defined as the amount of
rotation of a revolving line from the initial
position to the terminal position.
Counterclockwise rotations will be
called positive and the clockwise will be
called negative.
Consider a rotating ray OA with its
end point at the origin O.

Fig. 6. 1
The rotating ray OA is often called the terminal side of the angle and the
positive half of the x-axis (OX) is called the initial side.
The positive angle is XOA (counter-clockwise rotation)
The negative angle is XOA (clockwise rotation)
Note : 1. one complete rotation (counter clockwise) = 360 = 360 degree
2. If there is no rotation the measure of the angle is 0.
6.1.2 Measurement of angles:
If a rotation from the initial position to the terminal position is
\
|
.
|
1
360
th
of
the revolution, the angle is said to have a measure of one degree and written as
1. A degree is divided into minutes, and minute is divided into seconds.
180
i.e. 1 degree (1) = 60 minutes (60)
1 minute (1) = 60 seconds (60)
In theoretical work another system of measurement of angles is used which
is known as circular measure. A radian is taken as the unit of measurement.
6.1.3 Radian measure:
Definition:
One radian, written as 1
c
is the measure of an angle
subtended at the centre O of a circle of radius r by an arc
of length r.
Note : 1. To express the measure of an angle as a real
number, we use radian measure.

Fig. 6. 2
2. The word radians is optional and often omitted. Thus if no unit
is given for a rotation, it is understood to be in radians.
3. c in 1
c
indicates the circular measure.
6.1.4 Relation between Degrees and Radians
Since a circle of radius r has a circumference of 2r, a
circle of radius 1 unit (which is referred to as an unit circle)
has circumference 2. When is a complete rotation, P
travels the circumference of an unit circle completely.

Fig. 6. 3
If is a complete rotation (counter-clockwise) then = 2 radian. On the
other hand we already know that one complete rotation (counter-clockwise) is
360, consequently, 360 = 2 radians or 180 = radian. It follows that
1 =

180
radian and
180

= 1 radian. Therefore 1 = 0.01746 radian (app.) and


1 radian = 180
7
22
= 57 16 (app.).
Conversion for some special angles:
degrees 30 45 60 90 180 270 360
Radians
6

2

3
2

2
(Table 6.1)
Example 6.1: Convert
(i) 150 into radians (ii)
3
4
into degrees (iii)
1
4
radians into degrees.
181
Solution:
(i) 150 = 150

180
radians =
5
6

(ii)
3
4
radians =
3
4

180

= 135
(iii)
1
4
radians =
1
4

180

=
1
4
180
7
22
= 14 19 5
6.1.5 Quadrants
Let XOX and YOY be two lines at right angles
to each other as in the fig. (6.4) we call XOX and
YOY as x-axis and y-axis respectively.
Clearly these axes divide the entire plane into four
equal parts, called quadrants.

Fig. 6. 4
The parts XOY, YOX, XOY and YOX are known as the first, the
second, the third and the fourth quadrant respectively.
Angle in standard position:
If the vertex of an angle is at O and its initial side lies along x-axis, then the
angle is said to be in standard position.
Angle in a Quadrant:
An angle is said to be in a particular quadrant, if the terminal side of the
angle in standard position lies in that quadrant.
Example 6.2: Find the quadrants in which the terminal sides of the following
angles lie.
(i) 60 (ii) 300 (iii) 1295

Fig. 6. 5 a
From Fig (6.5a)
the terminal side of
60 lies in IV
quadrant.

Fig. 6.5 b
From Fig (6.5b) the
terminal side of 300
lies in I quadrant.

Fig. 6.5 c
From Fig (6.5c)
1295 = 3360+180 + 35
The terminal side lies in III
quadrant.
182
EXERCISE 6.1
(1) Convert the following degree measure into radian measure.
(i) 30 (ii) 100 (iii) 200 (iv) 320
(v) 85 (vi) 7 30
(2) Find the degree measure corresponding to the following radian measure
(i)
\
|
.
|

8
(ii)
\
|
.
|
18
5
(iii) 3 (iv)
\
|
.
|
7
12

(3) Determine the quadrants in which the following degrees lie.
(i) 380 (ii) 140 (iii) 1100
6.2. Trigonometrical ratios and Identities
6.2.1 Trigonometrical ratios:
In the co-ordinate plane, consider a point A
on the positive side of x-axis. Let this point
revolve about the origin in the anti clockwise
direction through an angle and reach the point P.
Now XOP = . Let the point P be (x, y). Draw
PL perpendicular to OX.
The triangle OLP is a right angled triangle, in
which is in standard position. Also, from the
OLP, we have

Fig. 6. 6
OL = x = Adjacent side ; PL = y = opposite side ;
OP = x
2
+ y
2
= Hypotenuse (= r > 0)
The trigonometrical ratios (circular functions) are defined as follows :
The sine of the angle is defined as the ratio
y
r
it is denoted by sin.
i.e. sin =
y
r
; cosecant value at =
r
y
= cosec ; y 0
and cos =
x
r
; secant value at =
r
x
= sec ; x 0
tan =
y
x
; cotangent value at =
x
y
= cot ; y 0
Note : 1. From the definition, observe that tan and sec are not defined
if x = 0, while cot and cosec are not defined if y = 0.
2. cosec , sec and cot are the reciprocals of sin, cos and tan
respectively.
183
Example 6.3: If (2, 3) is a point on the terminal side of , find all the six
trigonometrical ratios.
Solution:
P(x, y) is (2, 3) and it lies in the first quadrant.
x = 2, y = 3 ; r = x
2
+ y
2

= 4 + 9 = 13

sin =
y
r
=
3
13
; cos =
x
r
=
2
13
; tan =
y
x
=
3
2

cosec =
13
3
; sec =

13
2


; cot =
2
3



Fig. 6. 7
Note : 1. From example (6.3), we see that all the trigonometrical ratios are
positive when the terminal side of angle lies in first quadrant.
Now, let us observe the sign of trigonometrical ratios if the point on the
terminal side of lies in the other quadrants. (other than the first quadrant).
Example 6.4: If ( 2, 3) is a point on the terminal side of . Find all the six
trigonometrical ratios.
Solution:
P(x, y) is ( 2, 3) and it lies in the third
quadrant
x = 2 , y = 3 ;
r = x
2
+ y
2

= 4 + 9 = 13

Fig. 6. 8
sin =
y
r
=
3
13
= ve ; cos =
x
r
=
2
13
= ve ; tan =
y
x
=
3
2
=
3
2
= + ve
cosec =
r
y
=
13
3
= ve ; sec =
r
x
=
13
2
= ve ; cot =
2
3
=
2
3
= + ve
As example illustrates, trigonometric functions may be negative. For
instance, since r is always positive, sin =
y
r
and cosec =
r
y
have the same
sign as y. Thus sin and cosec are positive when is in the first or second
quadrants, and negative when is in the third or fourth quadrants. The signs of
the other trigonometric functions can be found similarly. The following table
indicates the signs depending on where lies.
184
Quadrants
Functions
I II III IV

Sin + +
Cos + +
Tan + +
Cosec + +
Sec + +
Cot + +

II I
sin All
cosec

III IV
tan cos
cot sec
Table (6.2)
6.2.2 Trigonometrical ratios of particular angles:
Let XOX and YOY be the co-ordinate axes.
With O as centre and unit radius draw a circle
cutting the co-ordinate axes at A, B, A and B as
shown in the figure.
Suppose that a moving point starts from A and
move along the circumference of the circle. Let it
cover an arc length. and take the final position P.
Let the co-ordinates of this point be P(x, y). Then
by definition, x = cos and y = sin.

Fig. 6. 9
We consider the arc length to be positive or negative according as the
variable point moves in the anti clockwise or clockwise direction respectively.
Range of cos and sin :
Since for every point (x, y) on the unit circle, we have
1 x 1 and 1 y 1, therefore 1 cos 1 and 1 sin 1
Values of cos and sin for = 0,

2
, ,
3
2
and 2.
We know that the circumference of a circle of unit radius is 2. If the
moving point starts from A and moves in the anti clockwise direction then at the
points A, B, A, B and A the arc lengths covered are = 0,

2
, ,
3
2
and 2
respectively.
Also, the co-ordinates of these points are:A(1, 0), B(0, 1), A(1, 0),
B(0, 1) and A(1, 0)
At the point:
A(1, 0), = 0 cos 0 = 1 and sin 0 = 0
185
B (0, 1), =

2
cos

2
= 0 and sin

2
= 1
A (1, 0), = cos = 1 and sin = 0
B (0, 1), = 3

2
cos 3

2
= 0 and sin 3

2
= 1
A (1, 0), = 2 cos 2 = 1 and sin 2 = 0
6.2.3 Trigonometrical ratios of 30, 45 and 60 :
Consider an isosceles right-angled triangle
whose equal sides are 1. Its hypotenuse is
1
2
+ 1
2
= 2 . Its base angle is 45.
sin 45 =
1
2
; cos 45 =
1
2
; tan45 = 1
cosec 45 = 2 ; sec 45 = 2 ; cot 45 = 1

Fig. 6. 10
Opposite side = 1
adjacent side = 1
hypotenuse = 2
Consider an equilateral triangle ABC of side 2 units. Each of its angle is
60. Let CD be the bisector of angle C. Then angle ACD is 30. Also AD = 1
and CD = 2
2
1
2
= 3 . Now in the right angled triangle ACD
For 30
opposite side = 1
adjacent side = 3
hypotenuse = 2
sin 30 =
1
2

cos 30 =
3
2

tan 30 =
1
3

cosec 30 = 2
sec 30 =
2
3

cot 30 = 3



Fig. 6. 11
For 60
opposite side = 3
adjacent side = 1
hypotenuse = 2
sin 60 =
3
2

cos 60 =
1
2

tan 60 = 3
cosec 60 =
2
3

sec 60 = 2
cot 60 =
1
3

186
0
6

2

3
2

2
sin 0 1
2

1
2

3
2

1 0 1 0
cos 1
3
2

1
2

1
2

0 1 0 1
tan 0 1
3

1
3 0 0
Table 6.3
Important results:
For all values of , cos ( ) = cos and sin ( ) = sin
Proof:
Let XOX and YOY be the co-ordinate axes. With O as centre and unit
radius draw a circle meeting OX at A. Now let a moving point start from A and
move in anti clockwise direction and take the final position P(x, y) so that arc
AP = .
On the other hand, if the point starts from A and moves in the clockwise
direction through the arc length AP equal to arc length AP. Then arc AP= .

Fig. 6. 12
Thus AOP = and AOP =
From the co-ordinate geometry, we know that the co-ordinates of P are
(x, y).
Clearly, cos and cos() are respectively the distances of points P and
P from y axis and clearly each one of them is equal to x.
cos ( ) = cos
Clearly, sin and sin( ) are respectively the distances of points P and
P from x-axis. As sin = y and sin () = y, we have sin() = sin
Deductions cosec () = cosec ; sec () = sec
tan () = tan ; cot () = cot
187
6.2.4 T-ratios of (90 ), (180 ), (270 ) and (360 ):
It is evident that, when is a small angle (0 < < 90), then
90 , 90 + etc., are in the quadrants as given below:
Angle Quadrant
90
Q
1
(first quadrant)
90 +
Q
2

180
Q
2

180 +
Q
3

270
Q
3

270 +
Q
4

360 ; also equal to
Q
4

360 +
Q
1

Table 6.4:
Let P(, ) be a point in the first quadrant. Let XOP = .
sin =

OP
; cos =

OP
; tan =


cosec =
OP

; sec =
OP

; cot =


T-ratios of (90 )
Let Q be a point in the first quadrant such
that
XOQ = 90 and OQ = OP.
Fig. 6. 13
Let PA and QB be perpendicular to OX and OY respectively.
Then OAP OBQ and Q is (, ). Hence
sin (90 ) =
y co-ordinate of Q
OQ
=

OP
= cos
cos (90 ) =
x co-ordinate of Q
OQ
=

OP
= sin
tan (90 ) =
y co-ordinate of Q
x coordinate of Q
=

= cot
Similarly, cosec (90 ) = sec
sec (90 ) = cosec
cot (90 ) = tan
188
T-ratios of (90 + )
Let R be a point in the second quadrant such
that XOR = 90 + and OR = OP
Let RC be perpendicular to x axis.
Then OAP RCO and R is ( , ), Hence

Fig. 6. 14
sin (90 + ) =
y co-ordinate of R
OR
=

OP
= cos
cos (90 + ) =
x co-ordinate of R
OR
=

OP
= sin
tan (90 + ) =
y co-ordinate of R
x coordinate of R
=


= cot
Similarly, cosec (90 + ) = sec
sec (90 + ) = cosec
cot (90 + ) = tan
T-ratios of (180 )
Let S be a point in the second quadrant such that
XOS =180 and OS =OP
Draw SD perpendicular to x-axis
Thus OAP ODS and S is ( , ). Hence

Fig. 6. 15
sin (180 ) =
y co-ordinate of S
OS
=

OP
= sin
cos (180 ) =
x co-ordinate of S
OS
=

OP
= cos
tan (180 ) =
y co-ordinate of S
x coordinate of S
=


= tan
Similarly, cosec (180 ) = cosec
sec (180 ) = sec
cot (180 ) = cot
T-ratios of (180 + )
Let T be a point in the third quadrant such that
XOT = 180 + and OT = OP
Draw TE perpendicular to x-axis
Then OAP OET and T is ( , ).
Hence

Fig. 6. 16
189
sin (180 + ) =
y co-ordinate of T
OT
=

OP
= sin
cos (180 + ) =
x co-ordinate of T
OT
=

OP
= cos
tan (180 + ) =
y co-ordinate of T
x coordinate of T
=


= tan
Similarly, cosec (180 + ) = cosec
sec (180 + ) = sec
cot (180 + ) = cot
Remark: To determine the trigonometric ratios of any angle, follow the
procedure given below
(i) Write the angle in the form k

2
; k Z.
(ii) Determine the quadrant in which the terminal side of the angle lies.
(iii) Detrmine the sign of the given trigonometric function in that
particular quadrant, using
S A
T C
rule.
(iv) If k is even, trigonometric function of allied angle equals the same
function of .
(v) If k is odd, then adopt the following changes:
sine cos ; tan cot ; sec cosec
Trigonometrical ratios for related angles
Angle

function
90 90 + 180 180+ 270 270+ 360
or

sin sin cos cos sin sin cos cos sin
cos cos sin sin cos cos sin sin cos
tan tan cot cot tan tan cot cot tan
cosec cosec sec sec cosec cosec sec sec cosec
sec sec cosec cosec sec sec cosec cosec sec
cot cot tan tan cot cot tan tan cot
Table 6.5
Note : Since 360 corresponds to one full revolution, sine of the angles
360+45;720+45;1080+45 are equal to sine of 45. This is so for the other
trigonemetrical ratios. That is, when an angle exceeds 360, it can be reduced to
an angle between 0 and 360 by wiping out integral multiples of 360.
190
Example 6.5:
Simplify : (i) tan 735 (ii) cos 980 (iii) sin 2460 (iv) cos (870)
(v) sin (780) (vi) cot (855) (vii) cosec 2040 (viii)sec ( 1305)
Solution:
(i) tan (735) = tan (2 360 + 15) = tan 15
(ii) cos 980 = cos (2 360 + 260) = cos 260
= cos (270 - 10) = sin 10
(iii) sin (2460) = sin (6 360 + 300) = sin (300)
= sin (360 60)
= sin 60
=
3
2

(iv) cos ( 870) = cos (870) = cos (2 360 + 150)
= cos 150 = cos (180 - 30)
= cos 30 =
3
2

(v) sin ( 780) = sin 780
= sin (2 360 + 60)
= sin 60 =
3
2

(vi) cot ( 855) = cot (855) = cot (2 360 + 135)
= cot (135) = cot (180 - 45)
= cot 45 = 1
(vii) cosec (2040) = cosec (5 360 + 240) = cosec (240)
= cosec (180 + 60) = cosec (60)
=
2
3

(viii) sec ( 1305) = sec (1305) = sec (3 360 + 225)
= sec (225) = sec (270 45)
= cosec 45 = 2
Example 6.6: Simplify :
cot (90 ) sin (180 + ) sec (360 )
tan (180 + ) sec ( ) cos (90 + )

191
Solution: The given expression =
tan ( sin ) (sec )
tan (sec ) ( sin )

= 1
Example 6.7:
Without using the tables, prove that sin 780 sin 480 + cos 120 cos60 =
1
2

Solution: sin 780 = sin (2 360 + 60) = sin 60 =
3
2

sin 480 = sin (360 + 120)
= sin 120 = sin (180 60) = sin 60 =
3
2

cos 120 = cos (180 60) = cos 60 =
1
2
; cos60 =
1
2

L.H.S. =
3
2
.
3
2

1
2
.
1
2

=
3
4

1
4
=
1
2
R.H.S.
6.2.5 Special properties of Trigonometrical functions:
Periodic function:
A function f(x) is said to be a periodic function with period if
f(x + )= f(x). The least positive value of is called the fundamental period of
the function.
All the circular functions (trigonometrical functions) are periodic
functions.
For example,
sin (x + 2) = sin x ; sin (x + 4) = sin x ; sin (x + 6) = sin x
sin (x + 2n) = sin x, n Z
Here = 6, 4, 2, 0, 2, 4, . But the fundamental period
must be the least positive quantity. Therefore = 2 is the fundamental period.
Thus sine function is a periodic function with fundamental period 2.
Similarly one can prove that the functions cos x, cosec x and sec x are also
periodic functions with fundamental period 2 while tan x and cot x are
periodic with fundamental period .
192
6.2.6 Odd and even functions:
We know that, if f(x) = f( x), then the function is an even function and if
f( x) = f(x) then the function is an odd function.
Consider f(x) = sin x ; f( x) = sin ( x) = sin x = f(x) i.e. f(x) = f( x)
sin x is an odd function. Similarly we can prove that cosec x, tan x and cot x
are odd functions.
Consider f(x) = cos x ; f( x) = cos ( x) = cos x = f(x). cosx is an even
function. Similarly we can prove sec x is an even function.
Note : We can read more about odd and even function in Chapter 7.
EXERCISE 6.2
(1) If sin =
11
12
, find the value of
sec (360 ) . tan (180 ) + cot (90 + ) sin (270 + )
(2) Express the following as functions of positive acute angles:-
(i) sin ( 840) (ii) cos (1220) (iii) cot ( 640) (iv) tan (300)
(v) cosec (420) (vi) sin ( 1110) (vii) cos ( 1050)
(3) Prove that
sin 300 . tan 330 . sec 420
cot 135 . cos 210 . cosec 315
=
2
3

(4) Prove that

)
`

1+cot sec
\
|
.
|
+

)
`

1 + cot + sec
\
|
.
|
+

2
=2 cot
(5) Express the following as functions of A :
( i) sec
\
|
.
|
A
3
2
(ii) cosec
\
|
.
|
A

2
(iii) tan
\
|
.
|
A
3
2

(iv) cos (720 + A) (v) tan (A + )
(6) Prove that
sin (180+A) . cos (90A) . tan (270A)
sec (540 A) cos (360+A) cosec (270+A)
= sin A cos
2
A
(7) Prove that sin . cos

)
`

sin
\
|
.
|

2
. cosec + cos
\
|
.
|

2
sec = 1
(8) Find the values of :-
(i) cos (135) (ii) sin (240) (iii) sec (225) (iv) cos ( 150)
(v) cot (315) (vi) cosec ( 300) (vii) cot
5
4
(viii) tan
\
|
.
|

5
6

(9) If A, B, C, D are angles of a cyclic quadrilateral prove that
cosA + cosB + cos C + cos D = 0.
193
(10) Find the values of the following expressions :
(i) tan
2
30 + tan
2
45 + tan
2
60 (ii) sin

6
. cos

3
+ cos

6
. sin

3

(iii) cos

6
. cos

3
sin

6
. sin

3
(iv) cos 45.cos60sin 45.sin 60
(v) tan
2
60 + 2 tan
2
45 (vi) tan
2
45 + 4 cos
2
60
(vii) cot 60 . tan30 + sec
2
45 . sin 90
(viii) tan
2
60 + 4 cot
2
45 + 3 sec
2
30 + cos
2
90
(ix) tan
2
30 + 2 sin 60 + tan 45 tan 60 + cos
2
30
(x)
1
2
sin
2
60
1
2
sec 60 tan
2
30 +
4
5
sin
2
45 . tan
2
60
(11) If cos =
1
2
and tan > 0 show that
5 tan + 4 sin
3 cos 3 sin
= 3.
6.2.7 Trigonometrical identities:
As in variables, sin . sin = (sin )
2
. This will be written as sin
2
.
Similarly
tan tan
2
= tan
3
etc. We can derive some fundamental trigonometric
identities as follows:
Consider the unit circle with centre at the origin O. Let
P(x, y) be any point on the circle with XOP = .
Draw PL perpendicular to OX. Now, triangle OLP is a
right angled triangle in which (hypotenuse) OP = r = 1
unit, and x and y are adjacent and opposite sides
respectively.
Now we have cos =
x
1
= x and sin =
y
1
= y; tan =
y
x


Fig. 6. 17
and r
2
= x
2
+ y
2
= 1
From OLP, we have x
2
+ y
2
= r
2
= 1
i.e. x
2
+ y
2
= cos
2
+ sin
2
= 1
1 + tan
2
= 1 +
y
2
x
2
=
x
2
+ y
2
x
2
=
\
|
.
|
1
x

2
=
\
|
.
|
1
cos
2
= sec
2

1 + cot
2
= 1 +
x
2
y
2
=
y
2
+ x
2
y
2
=
\
|
.
|
1
y
2
=
\
|
.
|
1
sin
2
= cosec
2

Thus we have the identities
194
sin
2
+ cos
2
= 1
1 + tan
2
= sec
2

1 + cot
2
= cosec
2

From these we also have
sec
2
tan
2
= 1
cosec
2
cot
2
= 1
Example 6.8: Show that cos
4
A sin
4
A = 1 2 sin
2
A
Solution: cos
4
A sin
4
A = (cos
2
A + sin
2
A) (cos
2
A sin
2
A)
= cos
2
A sin
2
A = 1 sin
2
A sin
2
A
= 1 2sin
2
A
Example 6.9: Prove that sec
2
A + cosec
2
A = sec
2
A . cosec
2
A
Solution: sec
2
A + cosec
2
A =
1
cos
2
A
+
1
sin
2
A

=
sin
2
A + cos
2
A
cos
2
A . sin
2
A
=
1
cos
2
A . sin
2
A

= sec
2
A . cosec
2
A
Example 6.10: Show that cosA 1 + cot
2
A = cosec
2
A 1
Solution: cosA 1 + cot
2
A = cos A cosec
2
A = cosA . cosecA
=
cosA
sinA
= cotA = cosec
2
A 1
Example 6.11: If a sin
2
+ b cos
2
= c, show that tan
2
=
c b
a c

Solution: a sin
2
+ b cos
2
= c.
Dividing both sides by cos
2
, we get a tan
2
+ b = c sec
2

a tan
2
+ b = c (1 + tan
2
)
tan
2
(a c) = c b
tan
2
=
c b
a c

Example 6.12: that
1 cosA
1 + cosA
= cosec A cotA
Solution: consider,
1 cosA
1 + cosA
=
1 cosA
1 + cosA

1 cosA
1 cosA

195
=
(1 cosA)
2
1 cos
2
A
=
\
|
.
|
1 cosA
sinA
2


1 cosA
1 + cosA
=
1 cosA
sinA
=
1
sinA

cosA
sinA

= cosec A cotA
Example 6.13:
If x = a cos + b sin and y = a sin b cos , show that x
2
+ y
2
= a
2
+ b
2

Solution: x
2
+ y
2
= (a cos + b sin)
2
+ (a sin b cos )
2

= a
2
cos
2
+ b
2
sin
2
+ 2ab cos sin
+ a
2
sin
2
+ b
2
cos
2
2ab sin cos
= a
2
(cos
2
+ sin
2
) + b
2
(sin
2
+ cos
2
)
= a
2
+ b
2

Example 6.14:Show that sin
2
A.tanA+cos
2
A . cotA+2 sinA . cosA=tanA + cotA
Solution: L.H.S. = sin
2
A .
sinA
cosA
+ cos
2
A .
cosA
sinA
+ 2sinA cosA
=
sin
3
A
cosA
+
cos
3
A
sinA
+ 2sinA . cosA
=
sin
4
A + cos
4
A + 2sin
2
A . cos
2
A
sinA . cosA

=
(sin
2
A + cos
2
A)
2
sinA . cosA
=
1
sinA . cosA

=
sin
2
A + cos
2
A
sinA . cosA
[ ] Qsin
2
A + cos
2
A = 1
=
sin
2
A
sinA cosA
+
cos
2
A
sinA cosA

Hence the result
sinA
cosA
+
cosA
sinA
= tanA + cotA = R.H.S.
Example 6.15: Show that 3(sinxcosx)
4
+6(sinx + cosx)
2
+4 (sin
6
x+cos
6
x) = 13
Solution: (sinx cosx)
4
= [ ] (sinx cosx)
2
2
= [sin
2
x + cos
2
x 2sinx cosx]
2

= [1 2sin x cosx]
2

= 1 4sinx cosx + 4sin
2
x cos
2
x (i)
(sinx + cosx)
2
= sin
2
x + cos
2
x+ 2sinx . cosx
= 1 + 2sinx cosx (ii)
sin
6
x + cos
6
x = (sin
2
x)
3
+ (cos
2
x)
3

196
= (sin
2
x + cos
2
x)
3
3sin
2
x . cos
2
x (sin
2
x + cos
2
x)
= 1 3sin
2
x cos
2
x (iii)
Using (i), (ii) and (iii)L.H.S.
= 3(1 4sin x cosx + 4sin
2
x . cos
2
x)
+ 6(1 + 2sinx cosx) + 4(1 3 sin
2
x cos
2
x)
= 3 + 6 + 4
= 13 = R.H.S.
Example 6.16: Prove that
tan + sec 1
tan sec + 1
=
1 + sin
cos

Solution: L.H.S. =
tan + sec (sec
2
tan
2
)
tan sec + 1

=
tan + sec (sec + tan) (sec tan)
tan sec + 1

=
(tan + sec) (1 sec + tan)
(tan sec + 1)
= tan + sec
=
sin
cos
+
1
cos
=
sin + 1
cos
= R.H.S.
EXERCISE 6.3
(1) Prove the following:
(i) sin
4
A cos
4
A = 1 2cos
2
A
(ii) sin
3
A cos
3
A = (sinA cosA) (1 + sinA cosA)
(iii) (sin + cos)
2
+ (sin cos)
2
= 2
(iv) (tan + cot)
2
= sec
2
+ cosec
2

(v)
1
1 + sin
+
1
1 sin
= 2sec
2
(vi)
secx + tanx
secx tanx
= (secx + tanx)
2

(vii)
cosec
cot + tan
= cos (viii)
1
tan + sec
= sec tan
(ix)
1
cosec cot
=
1 + cos
sin

(x) (sec + cos) (sec cos) = tan
2
+ sin
2

(2) If tan + sec = x, show that 2tan = x
1
x
, 2sec = x +
1
x

Hence show that sin =
x
2
1
x
2
+ 1

197
(3) If tan + sin = p, tan sin = q and p > q then show that p
2
q
2
= 4 pq
(4) Prove that (1 + cotA + tanA) (sinA cosA) =
secA
cosec
2
A

cosecA
sec
2
A

(5) Prove that
cosA
1 tanA
+
sinA
1 cotA
= sinA + cosA
(6) Prove the following :
(i)
1 + sinA
1 sinA
= secA + tanA (ii)
1 + cosA
1 cosA
= cosecA + cotA
(sinA 1) (cosA 1)
(iii)
1 sin
1 + sin
= sec tan
(7) If cos + sin = 2 cos, show that cos sin = 2 sin
(8) Prove that (1 + tanA + secA) (1 + cotA cosecA) = 2
6.3 Compound Angles
6.3.1 Compound Angles A + B and A B
In the previous chapter we have found the trigonometrical ratios of angles
such as 90 , 180 , which involves single angle only. In this chapter
we shall express the trigonometrical ratios of compound angles such as A + B,
A B, interms of trigonometrical ratios of A, B, .
It is important to note that the relation f(x + y) = f(x) + f(y) is not true for all
functions of a real variable. As an example all the six trigonometrical ratios do
not satisfy the above relation.
cos (A + B) is not equal to cosA + cosB.
Let us develop the identity
cos(A - B) = cosA cosB + sinA sinB

Fig. 6. 18

Fig. 6. 19
198
Let P and Q be any two points on the unit circle such that XOP = A and
XOQ = B. Then the coordinates of P and Q are (cos A, sinA) and
(cosB, sinB) respectively.
PQ
2
= (cosA cosB)
2
+ (sinA sinB)
2

= (cos
2
A 2cosA cosB + cos
2
B) + (sin
2
A 2sinA sinB + sin
2
B)
= (cos
2
A + sin
2
A) + (cos
2
B + sin
2
B) 2cosA cosB 2sinAcosB
= 1+1 2 cos A cosB 2 sinA sinB=2 2 (cosA cosB+sinA sinB) (1)
Now imagine that the unit circle above is rotated so that the point Q is at
(1, 0). The length PQ has not changed.
PQ
2
= [ ] cos (A B) 1
2
+ [sin (A B) 0]
2

= [ ] cos
2
(A B) 2cos(A B) + 1 + sin
2
(A B)
= [ ] cos
2
(A B) + sin
2
(A B) + 1 2cos (A B) = 1 + 1 2cos(A B)
= 2 2cos (A B) (2)
From (1) and (2), 2 2cos(A B) = 2 2 (cosAcosB + sinA sinB)
cos(A B) = cosA cosB + sinA sinB
Next let us consider cos(A + B). This is equal to cos [ ] A ( B) and by
cosine of a difference identity, we have the following:
cos(A + B) = cosA cos( B) + sinA . sin ( B)
But cos( B) = cosB and sin(B) = sin B
cos(A + B) = cosA cosB sinA sinB.
To develop an identity for sin(A + B), we recall the following:
sin = cos
\
|
.
|

2

In this identity we shall substitute A + B for
sin (A + B) = cos

2
(A + B) = cos

(
\
|
.
|

2
A B
We can now use the identity for the cosine of a difference.
= cos
\
|
.
|

2
A . cosB + sin
\
|
.
|

2
A . sinB
= sinA . cosB + cosA . sinB
Thus, sin (A + B) = sinA . cosB + cosA sinB
199
To find an identity for the sine of a difference, we can use the identity just
derived, substituting B for B
sin (A B) = sin [ ] A + ( B)
= sinA cos( B) + cosA . sin( B)
sin(A B) = sinA cosB cosA sinB
An identity for the tangent of a sum can be derived using identities already
established.
tan (A + B) =
sin (A + B)
cos(A + B)

=
sinA . cosB + cosA sinB
cosA cosB sinA sinB

Divide both Numerator and Denominator by cosA cosB
=
sinA cosB
cosA cosB
+
cosA sinB
cosA cosB
cosA cosB
cosA cosB

sinA sinB
cosA cosB

tan (A + B) =
tanA + tanB
1 tanA . tanB

Similarly, an identity for the tangent of a difference can be established.
It is given by tan (A B) =
tan A tan B
1 + tan . tan B

(1) sin (A + B) = sinA cosB + cosA sinB
(2) sin (A B) = sinA cosB cosA sinB
(3) cos (A + B) = cosA cosB sinA sinB
(4) cos (A B) = cosA cosB + sinA sinB
(5) tan (A + B) =
tanA + tanB
1 tanA tanB

(6) tan(A B) =
tanA tanB
1 + tanA . tanB

Example 6.17:Find the values of (i)cos 15 (ii)cos 105 (iii)sin 75 (iv)tan 15
Solution:
(i) cos15 = cos(45 30) = cos45 cos30 + sin45 sin30
=
1
2

3
2
+
1
2

1
2
=
3 + 1
2 2
=
3 + 1
2 2

2
2
=
6 + 2
4

(ii) cos105 = cos(60 + 45) = cos60 cos45 sin60 sin45
200
=
1
2

1
2

3
2

1
2
=
1 3
2 2
=
2 6
4

(iii) sin75 = sin(45 + 30) = sin45 cos30 + cos45 sin30
=
1
2
.
3
2
+
1
2
.
1
2
=
3 + 1
2 2
=
6 + 2
4

(iv) tan15 = tan(45 30) =
tan45 tan30
1 + tan45 tan30
=
1
1
3
1 + 1 .
1
3

=
3 3
3 + 3
= 2 3
Example 6.18: If A, B are acute angles, sinA =
3
5
;cos B=
12
13
, find cos(A + B)
Solution: cos (A + B) = cosA cosB sinA sinB
cosA = 1 sin
2
A = 1
9
25
=
4
5

sinB = 1 cos
2
B = 1
144
169
=
5
13

cos(A + B) =
4
5
.
12
13

3
5
.
5
13
=
33
65

Example 6.19: Show that (i) sin(A + B) sin(A B) = sin
2
A sin
2
B
(ii) cos(A + B) cos(A B) = cos
2
A sin
2
B
sin(A +B) sin(A B) = (sin A cosB + cosA sinB) (sinA cosB cosA sinB)
= sin
2
A cos
2
B cos
2
A sin
2
B
= sin
2
A (1 sin
2
B) (1 sin
2
A) sin
2
B
= sin
2
A sin
2
B
cos(A + B) cos(A B) = (cosA cosB sinA sinB) (cosA cosB + sinA sinB)
= cos
2
A cos
2
B sin
2
A sin
2
B
= cos
2
A (1 sin
2
B) (1 cos
2
A) sin
2
B
= cos
2
A sin
2
B
Example 6.20: If A + B = 45, show that (1 + tanA) (1 + tanB) = 2 and hence
deduce the value of tan 22
1
2

Solution: Given A + B = 45 tan (A + B) = tan45
201

tanA + tanB
1 tanA . tanB
= 1
i.e. tanA + tan B = 1 tanA . tanB
i.e. 1 + tanA + tanB = 2 tanA tanB (add 1 on both sides)
1 + tanA + tanB + tanA tanB = 2
i.e. (1 + tan A) (1 + tanB) = 2
Take A = B then 2A = 45 A = 22
1
2
= B

\
|
.
|
1 + tan 22
1
2
2
= 2 1 + tan 22
1
2
= 2
tan 22
1
2
= 2 1
Since 22
1
2
is acute, tan 22
1
2
is positive and therefore tan 22
1
2
= 2 1
Example 6.21:
(i) Prove that
tan69 + tan66
1 tan69 tan66
= 1 (ii)
tan (A B) + tanB
1 tan(A B) tanB
= tan A
(iii)
cos 17 + sin17
cos17 sin17
= tan62
Solution:
(i)
tan69 + tan66
1 tan69 tan66
= tan (69 + 66)
= tan (135) = tan (90 + 45) = cot45 = 1
(ii)
tan (A B) + tanB
1 tan(A B) tanB
= tan [ ] (A B) + B = tanA
(iii) L.H.S. =
cos 17 + sin17
cos17 sin17

Divide both Numerator and Denominator by cos17
L.H.S. =
1 + tan17
1 tan17
=
tan 45 + tan17
1 tan45 tan17
( tan45 = 1)
= tan (45 + 17) = tan62 = R.H.S.
Example 6.22: Prove that (i) tan
\
|
.
|

4
+ tan
\
|
.
|

4
= 1
(ii) If tanA = 3 and tanB =
1
2
, prove that A B =

4

202
Solution:
(i) L.H.S. = tan
\
|
.
|

4
+ tan
\
|
.
|

4

=
\

|
.
|
|
1 + tan
1 tan

\

|
.
|
|
1 tan
1 + tan
= 1
\
|
.
|
tan

4
= 1
(ii) tan (A B) =
tanA tanB
1 + tanA tanB
=
3
1
2
1 + 3 .
1
2
=
5
2
5
2
= 1 = tan

4

tan (A B) = tan

4
A B =

4

Example 6.23: If cos( + ) =
4
5
and sin ( ) =
5
13
where ( + ) and
( - ) are acute, find tan 2.
Solution:
cos ( + ) =
4
5
tan ( + ) =
3
4

sin ( ) =
5
13
tan ( ) =
5
12

2 = ( + ) + ( )
tan2 = tan [ ] ( + ) + ( - )
=
tan ( + ) + tan( )
1 tan( + ) . tan(
)
=
3
4
+
5
12
1
3
4

5
12
=
14
12
11
16
=
56
33

Example 6.24: Prove that tan3A tan2A tanA = tanA tan2A tan3A
Solution:
tan3A = tan(A + 2A) =
tanA + tan2A
1 tanA tan2A

i.e. tan 3A (1 tanA tan2A) = tanA + tan2A
i.e. tan3A tanA tan2A tan3A = tanA + tan2A
tan3A tan2A tanA = tanA tan2A tan3A
EXERCISE 6.4
(1) Find the values of (i) sin 15 (ii) cos 75 (iii) tan 75 (iv) sin 105
(2) Prove that
(i) sin (45+A) =
1
2
(sinA+cosA) (ii) cos(A+45) =
1
2
(cosAsinA)
203
(3) Prove that
(i) sin (45 + A) cos(45 + A) = 2 sinA
(ii) sin(30 + A) + sin(30 A) = cosA
(4) Prove that (i) cos(A + B) cos(A B) = cos
2
B sin
2
A
(ii) sin(A + B) sin(A B) = cos
2
B cos
2
A
(5) Prove that cos
2
15 + cos
2
45 + cos
2
75 =
3
2

(6) Prove that (i) sinA + sin(120 + A) + sin(240 + A) = 0
(ii) cosA + cos(120 + A) + cos(120 A) = 0
(7) Show that
(i) cos15sin15=
1
2
(ii) tan15+cot15=4 (iii) cot 75+tan75 = 4
(8) (i) Find sin45 + sin30 and compare with sin 75
(ii) Find cos45 cos30 and compare with cos15.
(9) Show that
(i) tan70 = 2 tan50 + tan 20
(ii) tan72 = tan18 + 2tan54 (Hint : tanA tanB = 1 if A + B = 90)
(iii)
cos11 + sin11
cos11 sin11
= tan56 (iv)
cos29 + sin29
cos29 sin29
= tan 74
(10) Prove that
sin (A B)
sinA sinB
+
sin (B C)
sin B sinC
+
sin (C A)
sin C sin A
= 0
(11) ( i) If tanA =
5
6
, tan B =
1
11
show that A + B = 45
(ii) If tan =
1
2
and tan =
1
3
, show that + =

4

(12) If A + B = 45, show that (cotA1) (cotB 1) = 2 and deduce the value
of cot 22
1
2


(13) If A + B + C = , prove that
(i) tanA + tanB + tanC = tanA tanB tanC
(ii) tan2A + tan2B + tan2C = tan2A tan2B tan2C
(14) If sinA =
1
3
, sinB =
1
4
find sin (A + B), where A and B are acute.
(15) Prove that (i) sin (A + 60) + sin(A 60) = sinA
(ii) tan4A tan3A tanA + tan3A + tanA tan4A = 0
204
6.3.2 Multiple angle identities:
Identities involving sin2A, cos2A, tan3A etc. are called multiple angle
identities. To develop these identities we shall use sum identities from the
preceding lesson.
We first develop an identity for sin2A.
Consider sin (A + B) = sinA cosB + cosA sinB and put B = A
sin2A = sin (A + A) = sinA cosA + cosA sinA
= 2 sinA cosA
Thus we have the identity sin2A = 2sinA . cosA
Identities involving cos2A and tan2A can be derived in much the same
way as the identity above
cos2A = cos (A + A) = cosA cosA sinA sinA
cos2A = cos
2
A sin
2
A
Thus we have the identity cos2A = cos
2
A sin
2
A
Similarly we can derive tan2A =
2tanA
1 tan
2
A

The other useful identities for cos2A can easily be derived as follows:
cos2A = cos
2
A sin
2
A = (1 sin
2
A) sin
2
A
= 1 2sin
2
A
cos2A = cos
2
A sin
2
A = cos
2
A (1 cos
2
A)
= 2cos
2
A 1
From cos2A = 1 2sin
2
A, also we have
sin
2
A =
1 cos2A
2

Also, cos2A = 2cos
2
A 1
cos
2
A =
1 + cos2A
2

Hence tan
2
A =
1 cos2A
1 + cos2A

sin2A = 2sinA cosA
=
2 sinA
cosA
cos
2
A =
2 tanA
sec
2
A
=
2tanA
1 + tan
2
A

205
cos2A = cos
2
A sin
2
A = cos
2
A
\

|
.
|
|
1
sin
2
A
cos
2
A

= cos
2
A (1 tan
2
A)
=
1 tan
2
A
sec
2
A
=
1 tan
2
A
1 + tan
2
A

Thus we have sin2A = 2 sinA . cosA
cos2A = cos
2
A sin
2
A
cos2A = 1 2sin
2
A
cos2A = 2 cos
2
A 1
tan2A =
2tanA
1 tan
2
A

sin2A =
2tanA
1 + tan
2
A

cos2A =
1 tan
2
A
1 + tan
2
A

6.3.3: Trigonometrical ratios of A in terms of trigonometrical
ratios of
A
2

sinA = sin
\
|
.
|
2
A
2

= 2 sin
A
2
. cos
A
2

cosA = cos
\
|
.
|
2
A
2
= cos
2

A
2
sin
2

A
2

= 2 cos
2

A
2
1
= 1 2 sin
2

A
2

tan A = tan
\
|
.
|
2
A
2

=
2 tan
A
2
1 tan
2

A
2

206
Similarly, we can prove the following identities
sinA =
2 tan
A
2
1 + tan
2

A
2

cosA =
1 tan
2

A
2
1 + tan
2

A
2

sin
2

A
2
=
1 cosA
2

cos
2

A
2
=
1 + cosA
2

tan
2

A
2
=
1 cosA
1 + cosA

Also note that tan
A
2
=
sinA
1 + cosA
and tan
A
2
=
1 cosA
sinA

Example 6.25: If sin =
3
8
and is acute, find sin2 ?
Solution: sin =
3
8
; cos = 1 sin
2
= 1
9
64
=
55
8

sin 2 = 2 sin cos = 2 .
3
8
.
55
8
=
3 55
32

Example 6.26: Find (i) sin15 (ii) tan15
Solution : (i) sin15 = sin
30
2
=
1 cos30
2
=
1
3
2
2
=
2 3
2

(ii) tan 15 = tan
30
2
=
1 cos30
sin30
=
1
3
2
1
2
= 2 3
6.3.4 Trigonometrical ratios involving 3A
sin3A = sin (2A + A) = sin2A . cosA + cos2A . sinA
= 2 sinA cos
2
A + (1 2sin
2
A) sinA
= 2sinA (1 sin
2
A) + (1 2sin
2
A) sinA
207
= 3sinA 4sin
3
A
Similarly, cos3A = 4 cos
3
A 3cosA
tan3A = tan (2A + A) =
tan2A + tanA
1 tan2A . tanA

=
\

|
.
|
|
2 tanA
1 tan
2
A
+ tanA
1 tanA .
2tanA
1 tan
2
A

=
3 tanA tan
3
A
1 3tan
2
A

Example 6.27: Prove that cos
4
A sin
4
A = cos2A
Solution:
L.H.S. = (cos
2
A + sin
2
A) (cos
2
A sin
2
A)
= 1 . cos2A = cos2A = R.H.S.
Example 6.28:
Show that cot3A =
cot
3
A 3cotA
3cot
2
A 1

Solution:
R.H.S. =
cot
3
A 3cotA
3cot
2
A 1
=
1
tan
3
A

3
tanA
3
tan
2
A
1
=
1 3tan
2
A
3tanA tan
3
A

=
1
tan3A
= cot3A = L.H.S.
Example 6.29:
If tanA =
1 cosB
sinB
, prove that tan2A = tanB, where A and B are acute
angles.
Solution : R.H.S =
1 cosB
sinB
=
2sin
2

B
2
2sin
B
2
. cos
B
2
=
sin
B
2
cos
B
2
= tan
B
2

tan
B
2
= tanA
208
A =
B
2
B = 2A
Therefore tan2A = tanB
Example 6.30: Show that 4 sinA sin (60 + A) . sin (60 A) = sin3A
Solution: L.H.S. = 4 sinA sin (60 + A) . sin (60 A)
= 4sinA { } sin (60 + A) . sin (60 A)
= 4sinA {sin
2
60 sin
2
A}
= 4sinA

)
`
3
4
sin
2
A = 3sinA 4sin
3
A = sin3A
= R.H.S.
Example 6.31: Prove that cos20 cos40 cos80 =
1
8

L.H.S. = cos20 cos40 cos80
= cos20 { } cos (60 20) cos(60 + 20)
= cos20 [ ] cos
2
60 sin
2
20
= cos20

(
1
4
sin
2
20
=
1
4
cos20 { } 1 4(1 cos
2
20)
=
1
4
{4cos
3
20 3 cos20} =
1
4
[cos3 20]
=
1
4
cos60 =
1
8
= R.H.S.
Example 6.32: Find the values of:
(i) sin18 (ii) cos18 (iii) cos36 (iv) sin36 (v) sin54 (vi) cos54
Solution:
(i) Let = 18 then 5 = 90 2 = 90 3
sin2 = sin(90 3) = cos3
2sin cos = 4cos
3
3cos
2sin = 4cos
2
3 (cos 0)
2sin = 1 4sin
2

4sin
2
+ 2sin 1 = 0
209
sin =
2 4 + 16
8
=
1 5
4

since sin 18 is positive, sin18 =
1 + 5
4

(ii) cos18 = 1 sin
2
18 = 1
\
|
.
|
5 1
4
2
=
10 + 2 5
4

(iii) cos36 = 1 2sin
2
18 =
5 + 1
4

(iv) sin36 = 1 cos
2
36 =
10 2 5
4

(v) sin54 = sin (90 36) = cos36 =
5 + 1
4

(vi) cos54 = cos (90 36) = sin36 =
10 2 5
4

EXERCISE 6.5
(1) Prove the following:
(i) 2sin15 cos15 =
1
2
(ii) sin

8
cos

8
=
1
2 2

(iii) sin72 =
10 + 2 5
4
(iv) cos72 =
5 1
4

(v) 1 2sin
2
22
1
2
=
1
2
(vi)
2 tan22
1
2

1 tan
2
22
1
2

= 1
(2) Show that 8 cos
3

9
6cos

9
= 1
(3) If tan

2
= ( ) 2 3 find the value of sin
(4) Prove that
1 + sin cos
1 + sin + cos
= tan

2

(5) Prove that
(i) cos
2

\
|
.
|

4
sin
2
\
|
.
|

4
= sin2 (ii) sec2+tan2 = tan
\
|
.
|

4
+
(6) (i) If tan = 3 find tan3 (ii) If sinA =
3
5
find sin3A
210
(7) If tan =
1
3
and tan =
1
7
show that 2 + =

4

(8) If 2 cos = x +
1
x
then prove that cos2 =
1
2

\

|
.
|
|
x
2
+
1
x
2

6.3.5 Transformation of a product into a sum or difference
We know that
sin(A + B) = sinA cosB + cosA sinB (1)
and sin(A B) = sinA cosB cosA sinB (2)
Adding (1) and (2), we get
sin(A + B) + sin (A B) = 2 sinA cosB (I)
Subtracting (2) from (1)
sin(A + B) sin(A B) = 2 cosA sinB (II)
Again
cos(A + B) = cosA cosB sinA sinB (3)
cos(A B) = cosA cosB + sinA sinB (4)
(3) + (4) cos(A + B) + cos(A B) = 2 cosA cosB (III)
(4) (3) cos(A + B) cos(A B) = 2sinA sinB (IV)
Now, let A + B = C and A B = D then
2A = C + D (OR) A =
C + D
2
and 2B = C D (OR) B =
C D
2

Putting these values of A and B in the above
four formulae I, II, III and IV, we get
1) sinC + sinD = 2 sin
C + D
2
. cos
C D
2

2) sinC sinD = 2 cos
C + D
2
. sin
C D
2

3) cos C + cosD = 2 cos
C + D
2
. cos
C D
2

4) cosD Cos C = 2sin
C + D
2
. sin
C D
2

Example 6.33: Express as sum or difference of following expressions.
(i) 2sin2 . cos (ii) 2 cos2 cos (iii) 2 sin 3A . sinA
(iv) cos7.cos5 (v)cos
3A
2
.cos
5A
2
(vi) cos3.sin2 (vii) 2cos3A . sin5A
211
Solution:
(i) 2 sin 2 . cos = sin(2 + ) + sin (2 ) = sin3 + sin
(ii) 2 cos2 . cos = cos(2 + ) + cos (2 ) = cos3 + cos
(iii) 2 sin3A . sinA = cos(3A A) cos(3A + A) = cos2A cos4A
(iv) cos7 . cos5 =
1
2
[cos(7 + 5) + cos(7 - 5)] =
1
2
[cos12 + cos2]
(v) cos
3A
2
. cos
5A
2
=
1
2

(
cos
\
|
.
|
3A
2
+
5A
2
+ cos
\
|
.
|
3A
2

5A
2

=
1
2
[cos4A + cos(A)] =
1
2
[cos4A + cosA]
(vi) cos3 . sin2 =
1
2
[ sin (3 + 2) sin(3 2)] =
1
2
[sin 5 sin ]
(vii) 2 cos3A . sin5A = sin(3A + 5A) sin(3A 5A) = sin8A sin(2A)
= sin8A + sin2A
Example 6.34: Express the following in the form of a product:
(i) sin4A + sin2A (ii) sin5A sin3A (iii) cos3A + cos7A
(iv) cos2A cos4A (v) cos60 cos20 (vi) cos55 + sin55
Solution:
(i) sin4A + sin2A = 2 sin
\
|
.
|
4A + 2A
2
cos
\
|
.
|
4A 2A
2
= 2sin3A cosA
(ii) sin5A sin3A = 2cos
\
|
.
|
5A + 3A
2
sin
\
|
.
|
5A 3A
2
= 2 cos4A sinA
(iii) cos3A + cos7A = 2 cos
\
|
.
|
3A + 7A
2
cos
\
|
.
|
3A 7A
2

= 2cos5A cos (2A)=2cos5A cos2A
(iv) cos2A cos4A = 2sin
\
|
.
|
2A + 4A
2
sin
\
|
.
|
2A 4A
2

= 2sin3A sin(A)=2sin3A sinA
(v) cos60 cos20 = 2 sin
(60 + 20)
2
sin
\
|
.
|
60 20
2
= 2sin40 sin20
(vi) cos55 + sin55=cos55 + cos(9055) = cos55 + cos35
= 2 cos
55 + 35
2
cos
55 35
2
= 2cos45 cos10
= 2
1
2
cos10 = 2 cos10
212
Example 6.35: Show that sin 20 sin40 sin80 =
3
8

Solution:
L.H.S. = sin20 sin40 sin80= sin20
1
2
{cos40 cos120}
=
1
2
sin20

)
`

cos40 +
1
2

=
1
2
sin20 cos40 +
1
4
sin20
=
1
4
(sin60 sin20) +
1
4
sin20 =
1
4
sin60
=
3
8
= R.H.S.
Example 6.36: Prove that 4(cos6 + sin24) = 3 + 15
Solution:
4(cos6 + sin24) = 4 (sin84 + sin24) [ cos6 = cos(9084) = sin84]
= 4 . 2sin
\
|
.
|
84 + 24
2
cos
\
|
.
|
84 24
2

= 8 sin54 . cos30 = 8
\
|
.
|
5 + 1
4
.
\
|
.
|
3
2

= 15 + 3
Example 6.37:
Prove that (i) cos20+cos100 + cos140 = 0 (ii) sin50sin70+sin10= 0
Solution:
(i) L.H.S. = cos20 + (cos100 + cos140)
= cos20 + 2cos
\
|
.
|
100 + 140
2
. cos
\
|
.
|
100 140
2

= cos20 + 2cos120 cos( 20) = cos20 + 2
\
|
.
|

1
2
cos20
= cos20 cos20 = 0 = R.H.S.
(ii) L.H.S. = sin50 sin70 + sin10
= 2 cos
\
|
.
|
50 + 70
2
. sin
\
|
.
|
50 70
2
+ sin10
213
= 2 cos60 . sin( 10) + sin10 = 2
1
2
( sin10) + sin10
= sin10 + sin10 = 0 = R.H.S.
6.3.6 Conditional Identities
Example 6.38:
If A + B + C = , prove that sin2A + sin2B + sin2C = 4sinA sinB sinC
Solution:
L.H.S. = sin2A + sin2B + sin2C = (sin2A + sin2B) + sin2C
= 2sin(A + B) cos(A B) + sin2C
= 2sin( C) cos(A B) + sin2C
= 2sinC cos(A B) + 2sinC cosC
= 2sinC { } cos(A B) + cosC
= 2 sinC

)
`

cos(A B) + cos(180 A + B

)
= 2 sinC {cos(A B) cos(A + B)} = 2sinC {2 sinA sinB}
= 4 sinA sinB sinC = R.H.S.
Example 6.39:
If A + B + C = 180 Prove that cos2A + cos2Bcos2C = 14sinA sinB cosC
Solution:
L.H.S. = cos2A + (cos2B cos2C)
=
1 2sin
2
A
+ { } 2 sin(B + C) sin(B C)
= 1 2sin
2
A 2sin(180 A) sin(B C)
= 1 2sin
2
A 2sinA sin(B C)
= 1 2 sinA [ ] sinA + sin (B C)
= 1 2sinA [ ] sin(B + C) + sin(B C) , [ A = 180 (B + C)]
= 1 2sinA [2sinB cosC]
= 1 4sinA sinB cosC = R.H.S.
Example 6.40:
If A+B+C = , prove that cos
2
A + cos
2
B cos
2
C = 1 2sinA sinB cosC
Solution:
L.H.S. = cos
2
A + cos
2
B cos
2
C = (1 sin
2
A) + cos
2
B cos
2
C
= 1 + (cos
2
B sin
2
A) cos
2
C
= 1 + cos(A + B) . cos(A B) cos
2
C
= 1 + cos( C) cos(A B) cos
2
C
= 1 cosC. cos(A B) cos
2
C
214
= 1 cosC [ ] cos(A B) + cosC
= 1 cosC [cos(A B) cos (A + B)] = 1 cosC [2sin A sinB]
= 1 2sinA sinB cosC = R.H.S.
EXERCISE 6.6
(1) Express in the form of a sum or difference:
(i) 2sin4 cos2 (ii) 2cos8 cos6 (iii) 2cos7 sin3
(iv) 2sin3A sinA (v) 2cos6A sin3A (vi) cos4 sin9
(vii) cos
3A
2
sin
A
2
(viii) sin
7A
2
cos
5A
2
(ix) cos
5
3
cos
4
3

(2) Express in the form of a product:
(i) sin13A + sin5A (ii) sin13A sin5A (iii) cos13A + cos5A
(iv) cos13A cos5A (v) sin52 sin32 (vi) cos 51 + cos23
(vii) sin80 cos70 (viii) sin50 + cos80 (ix) sin20 + cos50
(x) cos35 + sin72
(3) Prove that sin20 sin40 sin60 sin80 =
3
16

(4) Prove that cos20 cos40 cos60 cos80 =
1
16

(5) Prove that sin50 sin70 + cos80 = 0
(6) Prove that (cos + cos)
2
+ (sin sin)
2
= 4cos
2

\
|
.
|
+
2

(7) Prove that (i)
sin3A sinA
cosA cos3A
= cot2A (ii)
cos2A cos3A
sin2A + sin3A
= tan
A
2

(8) A + B + C = , prove that sin2A sin2B + sin2C = 4 cosA sinB cosC
(9) If A + B + C = 180,
prove that sin
2
A + sin
2
B + sin
2
C = 2 + 2cosA cosB cosC
(10) If A+B+C = , prove that tan
A
2
tan
B
2
+tan
B
2
tan
C
2
+tan
C
2
tan
A
2
= 1
(11) If A + B + C = 90, show that
sin2A + sin2B + sin2C
sin2A + sin2B sin2C
= cot A cot B
(12) Prove that A + B + C = , prove that sin
2
A
2
+ sin
2

B
2
+ sin
2

C
2

= 1 2 sin
A
2
sin
B
2
sin
C
2

215
6.4 Trigonometrical Equations
An equation involving trigonometrical function is called a trigonometrical
equation.
cos =
1
2
, tan = 0, cos
2
2sin =
1
2
are some examples for
trigonometrical equations. To solve these equations we find all replacements for
the variable that make the equations true.
A solution of a trigonometrical equation is the value of the unknown angle
that satisfies the equation. A trigonometrical equation may have infinite number
of solutions. The solution in which the absolute value of the angle is the least is
called principal solution. Note that trigonometrical equations are different
from trigonometrical identities. It is possible that some equations may not have
solution. For example cos = 4 has no solution. The expression involving
integer n which gives all solutions of a trigonometrical equation is called the
general solution.
6.4.1 General solutions of sin = 0 ; cos = 0 ; tan = 0
Consider the unit circle with centre at O(0, 0)
Let a revolving line OP, starting from OX, trace XOP = Draw PM
perpendicular to OX
(1) sin = 0
In the right angled triangle OMP we have OP = 1
unit,
sin =
MP
OP
sin = MP
If sin = 0, then MP = 0, i.e. OP coincides with
OX or OX

Fig. 6.20
XOP = = 0, , 2, 3, [in the anti clockwise direction]
or = , 2, 3, [in the clockwise direction]
i.e. = 0 or any + ve or ve integral multiple of .
Hence the general solution of sin = 0 is given by = n, n Z,
where Z is the set of all integers.
(2) cos = 0
In the right angled triangle OMP we have cos =
OM
OP
= OM (OP = 1 unit)
216
If cos = 0, then OM = 0
i.e. OP coincides with OY or OY
i.e. =

2
,
3
2
, 5

2
, . . [in anticlockwise direction)
or =

2
,
3
2
,
5
2
[in clockwise direction]
i.e. =
\
|
.
|
odd multiple of

2

Hence the general value of is given by = (2n + 1)

2
, n Z
(3) tan = 0
In the right angled triangle OMP, if tan = 0 then
MP
OM
= 0 or MP = 0
Proceeding as in (1), we get = n, n Z
Thus, (1) If sin = 0, = n, n Z
(2) If cos = 0, = (2n + 1)

2
, n Z
(3) If tan = 0, = n, n Z
When a trigonometrical equation is solved, among all solutions the
solution which is in

(

2
,

2
for sine, in
\
|
.
|

2
,

2
for tangent and in [0, ] for
cosine, are the principal values of those functions.
Example 6.41:
Find the principal value of the following :
(i) cosx =
3
2
(ii) cos =
3
2
(iii) cosec =
2
3

(iv) cot = 1 (v) tan = 3
Solution: (i) cosx =
3
2
> 0
x lies in the first or fourth quadrant. Principal value of x must be in
[0, ]. Since cosx is positive the principal value is in the first quadrant
cosx =
3
2
= cos

6
and

6
[0, ]
The principal value of x is

6
.
217
(ii) cos =
3
2
< 0
Since cos is negative, lies in the second or third quadrant. But the
principal value must be in [0, ] i.e. in first or second quadrant. The principal
value is in the second quadrant.
cos =
3
2
= cos (180 30) = cos150.
The principal value is = 150 =
5
6
.
(iii) cosec =
2
3
sin =
3
2
< 0
lies in the third or fourth quadrant. But principal value must be in

2
,

2

i.e. in first or fourth quadrant. =

3

(iv) cot = 1 tan = 1 < 0
is in the second or fourth quadrant. Principal value of is in
\
|
.
|

2
,

2

the solution is in the fourth quadrant.
cot
\
|
.
|

4
= 1 =

4

\
|
.
|

2
,

2

6.4.2 General solutions of sin = sin ; cos = cos ; tan = tan
(1) sin = sin

2
i.e.

2
,

2

sin sin = 0
2 cos
\
|
.
|
+
2
. sin
\
|
.
|

2
= 0
cos
\
|
.
|
+
2
= 0 or sin
\
|
.
|

2
= 0

+
2
= (2n + 1)

2
, or

2
= n, n Z
+ = odd multiple of or = even multiple of
= (odd multiple of ) (1)
or = (even multiple of ) + (2)
218
Combining (1) and (2), we have
= n + ( 1)
n
., where n Z
(2) cos = cos 0 i.e. [0, ]
cos cos = 0
2sin
\
|
.
|
+
2
. sin
\
|
.
|

2
= 0
sin
\
|
.
|
+
2
= 0 or sin
\
|
.
|

2
= 0

+
2
= n ; n Z or

2
= n ; n Z
= 2n or = 2n +
Hence = 2n n Z.
(3) tan = tan

2
< <

2
i.e.
\
|
.
|

2
,

2


sin
cos
=
sin
cos

sin cos cos sin = 0
sin ( ) = 0
= n, n Z
= n + , n Z
Thus, we have sin = sin = n + ( 1)
n
; n Z
cos = cos = 2n ; n Z
tan = tan = n + ; n Z
Example 6.42: Find the general solution of the following :
(i) sin =
1
2
(ii) sec = 2 (iii) cos
2
=
1
4
(iv) cot
2
= 3 (v) sec
2
=
4
3

Solution: (i) sin =
1
2

sin =
1
2
= sin

6
which is of the form sin = sin where =

6

The general solution is = n + ( 1)
n
.

6
; n Z
(ii) sec = 2 cos =
1
2
< 0
Principal value of lies in [0, ]
As cos is negative, the principal value of lies in second quadrant.
219
cos
3
4
= cos
\
|
.
|

4
= cos

4
=
1
2

= 2n
3
4
; n Z
(iii) We know that cos2 = 2cos
2
1
= 2
\
|
.
|
1
4
1 =
1
2
1 =
1
2
= cos

3
= cos
2
3

2 = 2n
2
3
; n Z
= n

3
; n Z
(iv) We know that 1 + cot
2
= cosec
2
1 + 3 = cosec
2

cosec
2
= 4 or sin
2
=
1
4

cos2 = 1 2 sin
2
= 1 2
\
|
.
|
1
4
=
1
2
= cos

3

2 = 2n

3
; n Z
= n

6
; n Z
(v) We know that tan
2
= sec
2
1 =
4
3
1 =
1
3

cos 2 =
1 tan
2

1 + tan
2

=
1
1
3
1 +
1
3
=
2
3
4
3
=
1
2

cos 2 =
1
2
= cos

3

2 = 2n

3
; n Z
= n

6
; n Z
Note : Solve : sin =
3
2

There are two solutions in 0 < 2 i.e. =

3
and
4
3

220
The general solution is
= n + ( 1)
n

\
|
.
|

3
; n Z (1)
Even if we take = n + ( 1)
n

\
|
.
|
4
3
; n Z (2)
The solution will be the same although these two structures are different.
Here the solution sets of (1) and (2) are same. But the order in which they
occur are different.
For example Put n = 1 in (1), we get, =
4
3

Put n = 0 in (2), we get, =
4
3

It is a convention to take that value of whose absolute value is least as
(principal value) to define the general solution.
Example 6.43: Solve : 2cos
2
+ 3sin = 0
Solution:
2cos
2
+ 3sin = 0 2 (1 sin
2
) + 3 sin = 0
2sin
2
3sin 2 = 0
(2 sin + 1) (sin 2) = 0
sin =
1
2
( sin = 2 is not possible)
sin = sin

6

sin = sin
\
|
.
|

6

=

6

= n + ( 1)
n
.
\
|
.
|

6
; n Z
Example 6.44: Solve : 2tan cot = 1
Solution:
2 tan cot = 1
2 tan
1
tan
= 1
2 tan
2
+ tan 1 = 0
(2 tan 1)(tan + 1) = 0
221
2 tan 1 = 0 or tan + 1 = 0
tan =
1
2
or tan = 1
When tan = 1 = tan

4

tan = tan
\
|
.
|

4

= n +
\
|
.
|

4

= n

4
; n Z
When tan =
1
2
= tan (say)
= n +
= n + tan
1

\
|
.
|
1
2

Hence = n

4
or = n + tan
1

\
|
.
|
1
2
; n Z
Example 6.45: Solve : sin2x + sin6x + sin4x = 0
Solution:
sin2x + sin6x + sin4x = 0 or (sin6x + sin2x) + sin4x = 0
or 2sin4x . cos2x + sin4x = 0
sin4x (2 cos2x + 1) = 0
when sin4x = 0 4x = n or x =
n
4
; n Z
When 2 cos2x + 1 = 0 cos 2x =
1
2
= cos

3
= cos
\
|
.
|

3
= cos
2
3

2x = 2n
2
3
or x = n

3

Hence x =
n
4
or x = n

3
; n Z
Example 6.46: Solve : 2sin
2
x + sin
2
2x = 2
Solution: 2 sin
2
x + sin
2
2x = 2
sin
2
2x = 2 2sin
2
x
= 2(1 sin
2
x)
sin
2
2x = 2 cos
2
x
222
4sin
2
x cos
2
x 2 cos
2
x = 0
2(1 cos
2
x) cos
2
x cos
2
x = 0
2cos
4
x cos
2
x = 0
cos
2
x (2 cos
2
x 1) = 0
cos
2
x = 0 cos
2
x =
1
2
=
\
|
.
|
1
2
2

cos
2
x = cos
2

2
cos
2
x = cos
2

4

x = n

2
, n Z x = m

4
, m Z
Example 6.47: Solve : tan
2
+ ( ) 1 3 tan 3 = 0
tan
2
+ tan 3 tan

3 = 0
tan (tan + 1) 3 (tan + 1) = 0
(tan + 1) (tan 3 ) = 0
tan = 1 tan = 3
tan = tan
\
|
.
|

4
tan = tan

3



= n

4
, n Z m +

3
, m Z
6.4.3 Solving equation of the form a cos + b sin = c. where c
2
a
2
+ b
2

a cos + b sin = c (1)
Divide each term by

a
2
+ b
2

,


a
a
2
+ b
2


cos +
b
a
2
+ b
2


sin =

c
a
2
+ b
2



Choose cos =

a
a
2
+ b
2


; sin =
b
a
2
+ b
2
and cos =
c
a
2
+ b
2



(1) becomes cos cos + sin sin = cos
cos ( ) = cos
= 2n
= 2n + , n Z

Example 6.48: Solve : 3 sin x + cosx = 2
223
Solution: This is of the form a cosx + b sinx = c, where

c
2
a
2
+ b
2


So dividing the equation by

( ) 3
2

+ 1
2


or 2

We get
3
2
sin x +
1
2
cosx = 1 sin

3
. sinx + cos

3
. cos x = 1
i.e. cos
\
|
.
|
x

3
= 1
cos
\
|
.
|
x

3
= cos 0
x

3
= 2n 0
i.e. x = 2n +

3
, n Z

EXERCISE 6.7
(1) Find the principal value of the following equations:
(i) sin =
1
2
(ii) 2 cos 1 = 0 (iii) 3 cot = 1
(iv) 3 sec = 2 (v) sinx =
3
2
(vi) tan =
1
3

(vii) sec x = 2
(2) Find the general solution of the following equation:
(i) sin2 =
1
2
(ii) tan = 3 (iii) cos 3 =
1
2

(3) Solve the following :
(i) sin3x = sinx (ii) sin 4x + sin2x = 0 (iii) tan2x = tanx
(4) Solve the following:
(i) sin
2
2cos +
1
4
= 0 (ii) cos
2
x + sin
2
x + cosx = 0
(iii) cosx + cos2x + cos3x = 0 (iv) sin2x + sin4x = 2sin3x
(5) Solve the following:
(i) sin + cos = 2 (ii) sin cos = 2
(iii) 2 sec + tan = 1 (iv) cosec cot = 3
224
6.5 Properties of Triangles
Consider a triangle ABC.
It has three angles A, B and C.
The sides opposite to the angles A, B, C are denoted
by the corresponding small letters a, b, c respectively.
Thus a = BC, b = CA, c = AB.

Fig. 6.21
We can establish number of formulae connecting these three angles and sides.
I. Sine formula:
In any triangle ABC,
a
sinA
=
b
sin B
=
c
sinC
= 2R. Where R is the radius
of the circum circle of the triangle ABC.
In fig(6.22) O is the circumcentre of the triangle
ABC. R is the radius of the circumcircle. Draw OD
perpendicular to BC. Now BC = a, BD =
a
2

Clearly BOC is an isosceles triangle.
We know that BOC = 2 BAC = 2A

Fig. 6.22
BOD = A
From the right angled triangle BOD,
sinA =
BD
R
=
a/2
R
=
a
2R

2R sinA = a or
a
sinA
= 2R
Similarly, we can prove
b
sinB
=
c
sinC
= 2R

a
sin A
=
b
sin B
=
c
sin C
= 2R
II. Napiers formulae
In any triangle ABC
(1) tan
A B
2
=
a b
a + b
cot
C
2

(2) tan
B C
2
=
b c
b + c
cot
A
2

(3) tan
C A
2
=
c a
c + a
cot
B
2
are true
These are called Napiers formulae
225
Result (1): tan
A B
2
=
a b
a + b
cot
C
2

Proof: From sine formulae

a b
a + b
cot
C
2
=
2R sinA 2R sinB
2R sinA + 2RsinB
cot
C
2

=
sinA sinB
sinA + sinB
cot
C
2

=
2 cos
A + B
2
sin
A B
2
2 sin
A + B
2
cos
A B
2
cot
C
2

= cot
\
|
.
|
A + B
2
tan
A B
2
cot
C
2

= cot
\
|
.
|
90
C
2
tan
A B
2
cot
C
2

= tan
C
2
tan
A B
2
cot
C
2
= tan
A B
2

tan
A B
2
=
a b
a + b
cot
C
2

Similarly, we can prove other two results (2) and (3)
III. Cosine formulae
In any triangle ABC, the following results are true with usual notation.
Results:
(1) a
2
= b
2
+ c
2
2bc cosA (2) b
2
= c
2
+ a
2
2ca cosB
(3) c
2
= a
2
+ b
2
2ab cosC
These are called cosine formulae
Result (1): a
2
= b
2
+ c
2
2bc cosA
Proof:
Draw CD perpendicular to AB.
Now a
2
= BC
2
= CD
2
+ BD
2


= (AC
2
AD
2
) + (AB AD)
2

= AC
2
AD
2
+ AB
2
+ AD
2
2AB AD
= AC
2
+ AB
2
2AB (AC cosA)
a
2
= b
2
+ c
2
2bc cosA

Fig. 6.23
226
Similarly we can prove the other results (2) and (3)
We can rewrite the formulae in different formats.
cosA =
b
2
+ c
2
a
2
2bc
; cosB =
c
2
+ a
2
b
2
2ca
; cosC =
a
2
+ b
2
c
2
2ab

IV. Projection formulae
In any triangle ABC
(1) a = b cos C + c cosB (2)b = c cosA + a cosC (3) c = a cosB + b cosA
are true with usual notations and these are called projection formulae.
Result (1): a = b cosC + c cosB
Proof:
In triangle ABC, draw AD perpendicular to BC.
From the right angled triangles ABD and ADC,
cosB =
BD
AB
BD = AB cosB


Fig. 6.24
cosC =
DC
AC
DC = AC cosC
But BC = BD + DC = AB cosB + AC cosC
a = c cosB + b cosC
or a = b cosC + c cosB
Similarly, we can prove the other formulae (2) and (3)
V. Sub-multiple (half) angle formulae
In any triangle ABC, the following results are true.
(1) sin
A
2
=
(s b) (s c)
bc
(2) sin
B
2
=
(s c) (s a)
ca

(3) sin
C
2
=
(s a) (s b)
ab
(4) cos
A
2
=
s(s a)
bc

(5) cos
B
2
=
s(s b)
ca
(6) cos
C
2
=
s(s c)
ab

(7) tan
A
2
=
(s b) (s c)
s(s a)
(8) tan
B
2
=
(s c) (s a)
s(s b)

(9) tan
C
2
=
(s a) (s b)
s(s c)

where s =
a + b + c
2

The above results are called sub-multiple angles (or half angle) formulae.
227
Result (1): sin
A
2
=
(s b) (s c)
bc

Proof : We know that cos2A = 1 2sin
2
A
2sin
2
A = 1 cos2A
Replacing A by
A
2
, 2 sin
2
A
2
= 1 cosA
= 1
b
2
+ c
2
a
2
2bc
=
2bc b
2
c
2
+ a
2
2bc

=
a
2
(b c)
2
2bc
=
(a + b c) (a b + c)
2bc

=
(a + b + c 2c) (a + b + c 2b)
2bc

=
(2s 2c) (2s 2b)
2bc
a + b + c = 2s
2sin
2

A
2
=
2(s c) 2(s b)
2bc

sin
2

A
2
=
(s b) (s c)
bc

sin
A
2
=
(s b) (s c)
bc

Since
A
2
is acute, sin
A
2
is always positive.
Thus sin
A
2
=
(s b) (s c)
bc

Similarly we can prove the other two sine related formulae (2) and (3)
Result (4): cos
A
2
=
s(s a)
bc

Proof : We know that cos2A = 2cos
2
A 1
2cos
2
A = 1 + cos2A
Replacing A by
A
2
, 2 cos
2
A
2
= 1 + cosA
= 1 +
b
2
+ c
2
a
2
2bc
=
2bc + b
2
+ c
2
a
2
2bc

=
(b + c)
2
a
2
2bc
=
(b + c + a) (b + c a)
2bc

228
=
(b + c + a) (b + c + a 2a)
2bc
=
2s(2s 2a)
2bc

2 cos
2
A
2
=
2s 2(s a)
2bc

cos
2
A
2
=
s(s a)
bc

cos

A
2
=
s(s a)
bc

Similarly we can prove other two cosine related formulae (5) and (6)
Result (7): tan
A
2
=
(s b) (s c)
s(s a)

Proof: tan
A
2
=
sin
A
2
cos
A
2
=
(s b) (s c)
bc
s(s a)
bc

=
(s b) (s c)
s(s a)

Similarly we can prove other two tangent related formulae (8) and (9)
VI. Area formulae ( denotes area of a triangle)
In any triangle ABC
(1) =
1
2
ab sinC (2) =
1
2
bc sinA (3) =
1
2
ca sinB
(4) =
abc
4R
(5) = 2R
2
sinA sinB sinC (6) = s(s a) (s b) (s c)
are true with the usual notations and these are called Area formulae.
Result (1): =
1
2
ab sinC
Proof :
Draw AD perpendicular to BC
= Area of triangle ABC
=
1
2
BC AD =
1
2
BC AC sinC
=
1
2
ab sinC [ sinC =
AD
AC
AD = AC sinC]

Fig. 6.25
Similarly we can prove the results (2) and (3)
229
Result (4): =
abc
4R

Proof:
We know that =
1
2
ab sinC
=
1
2
ab
c
2R
Q
c
sinC
= 2R
=
abc
4R

Result (5): = 2R
2
sinA sinB sinC
Proof:
We know that =
1
2
ab sinC
=
1
2
2R sinA 2R sinB sinC Qa = 2R sinA
= 2R
2
sinA sinB sinC b = 2R sinB
Result (6) Prove that = s(s a) (s b) (s c)
Proof:
We know that =
1
2
ab sinC
=
1
2
ab 2sin
C
2
cos
C
2

= ab
(s a) (s b)
ab

s(s c)
ab

= s(s a) (s b) (s c)
Example 6.49: In a triangle ABC prove that a sinA b sinB = c sin(A B)
Solution:
By sine formulae we have

a
sinA
=
b
sinB
=
c
sinC
= 2R
a = 2R sinA, b = 2R sinB, c = 2R sin C
a sinA b sinB = 2RsinA sinA 2R sinB sinB
= 2R (sin
2
A sin
2
B)
= 2R sin(A + B) sin(A B)
= 2R sin(180 C) sin (A B)
230
= 2R sinC sin(A B)
= c sin (A B)
Example 6.50: Prove that
sin(A B)
sin(A +B)
=
a
2
b
2
c
2

Solution:
By sine formula
a
sinA
=
b
sinB
=
c
sinC
= 2R

a
2
b
2
c
2
=
(2R sinA)
2
(2R sinB)
2
(2R sinC)
2

=
4R
2
sin
2
A 4R
2
sin
2
B
4R
2
sin
2
C
=
sin
2
A sin
2
B
sin
2
C

=
sin(A + B) sin(A B)
sin
2
C
[sinC = sin(A+ B)]
=
sin(A + B) sin(A B)
sin
2
(A +B)
=
sin(A B)
sin(A + B)

Example 6.51: Prove that a sin (B C) = 0
Solution:
a sin (BC) = a sin(B C) + b sin(C A) + c sin (A B)
= 2R sinA sin(BC) + 2R sinB sin(C A) + 2R sinC sin(A B)
sinA = sin(B + C), sinB = sin(C + A) ; sinC = sin(A + B)
= 2R sin(B + C) sin(B C) + 2R sin(C + A) sin(C A)
+ 2R sin(A +B) sin(A B)
= 2R [sin
2
B sin
2
C + sin
2
C sin
2
A + sin
2
A sin
2
B]
= 0
Example 6.52: Prove that cos
B C
2
=
b + c
a
sin
A
2

Solution:
b + c
a
sin
A
2
=
2R sinB + 2R sinC
2R sinA
sin
A
2

=
sinB + sinC
sinA
sin
A
2

=
2 sin
B + C
2
cos
B C
2
2 sin
A
2
cos
A
2
sin
A
2

231
=
sin
B + C
2
cos
B C
2
cos
A
2

=
sin
\
|
.
|
180 A
2
cos
B C
2
cos
A
2

=
sin
\
|
.
|
90
A
2
cos
B C
2
cos
A
2

= cos
B C
2
Q sin
\
|
.
|
90
A
2
= cos
A
2

Example 6.53: In any triangle ABC prove that

a
2
sin (B C)
sinA
+
b
2
sin(C A)
sinB
+
c
2
sin(A B)
sinC
= 0
Solution:

a
2
sin (B C)
sinA
=
(2R sinA)
2
sin(B C)
sinA
=
4R
2
sin
2
A sin (B C)
sinA

= 4R
2
sinA sin(B C) = 4R
2
sin(B + C) sin(B C)
= 4R
2
(sin
2
B sin
2
C) = 4R
2
sin
2
B 4R
2
sin
2
C
= b
2
c
2

Similarly
b
2
sin(C A)
sinB
= c
2
a
2

c
2
sin(A B)
sinC
= a
2
b
2


a
2
sin (B C)
sinA
+
b
2
sin(C A)
sinB
+
c
2
sin(A B)
sinC

= b
2
c
2
+ c
2
a
2
+ a
2
b
2

= 0
EXERCISE 6.8
In any triangle ABC prove that
(1) a
2
= (b + c)
2
sin
2

A
2
+ (b c)
2
cos
2

A
2

232
(2) a(b
2
+ c
2
) cosA = 3abc
(3) a(sinB sinC) = 0
(4) (b + c) cosA = a + b + c
(5) a
3
sin(B C) + b
3
sin(C A) + c
3
sin(A B) = 0
(6) a(b cosC c cosB) = b
2
c
2

(7)
cosA
a
+
cos B
b
+
cos C
c
=
a
2
+ b
2
+ c
2
2abc

(8)
tanA
tanB
=
c
2
+ a
2
b
2
b
2
+ c
2
a
2

(9) If a cosA = b cosB then show that the triangle is either an isosceles
triangle or right angled triangle?
6.6. Solution of triangles
We know that a triangle has six parts (or elements). Consider a triangle
ABC. With usual symbols, the sides a, b, c and the angles A, B, C are parts of
the triangle ABC.
The process of finding the unknown parts of a
triangle is called the solution of triangle. If three parts of
a triangle (atleast one of which is a side) are given then
the other parts can be found. Here, we shall discuss the
following three types.
1) Any three sides (SSS) are given.

Fig. 6.26
2) Any one side and two angles (SAA) are given.
3) Any two sides and the included angle (SAS) are given.
Type I: Given three sides (SSS)
To solve this type, we can use any one of the following formulae.
(a) Cosine formula (b) Sine formula (c) Half angle formula .
It is better to use cosine formula if the sides are small, while use half angle
formula if the sides are large.
Example 6.54: Given a = 8, b = 9c = 10, find all the angles.
Solution: To find A, use the formula
a
2
= b
2
+ c
2
2bc cosA
cosA =
b
2
+ c
2
a
2
2bc
=
81 + 100 64
180
=
117
180

A = 49 28
233
Similarly
cosB =
c
2
+ a
2
b
2
2ca
=
100 + 64 81
160
=
83
160

B = 58 51
But A + B + C = 180
C = 180 (49 28 + 58 51)
= 71 41
Thus A = 49 28, B = 58 51, C = 71 41
Note: In the above example the numbers are smaller and hence we used cosine
formula.
Example 6.55: Given a = 31, b = 42, c = 57, find all the angles.
Solution: Since the sides are larger quantities, use half angle formulae
s =
a + b + c
2
= 65
tan
A
2
=
(s b) (s c)
s(s a)
=
\

|
.
|
|
23 8
65 34
1
2

log

(
tan
A
2
=
1
2
[log23 + log8 log65 log34]
=
1
2
[1.3617 + 0. 9031 1.8129 1.5315]
=
1
2
[ 1.0796] =
1
2
[2 + 0.9204]
=
1
2


(
2

+ 0.9204 = 1

.4602

A
2
= 16 6 A = 32 12
tan
B
2
=
(s c) (s a)
s(s b)
=
\

|
.
|
|
8 34
65 23
1
2

log

(
tan
B
2
=
1
2
[log8 + log34 log65 log23]
=
1
2
[ 0.7400] =
1
2
[2 + 1.2600]
=
1
2


(
2

+ 1.2600 = 1

.6300
234

B
2
= 23 6 B = 46 12
C = 180 (A + B) = 101 36
Thus A = 32 12 B = 46 12 C = 101 36
Type II: Given one side and any two angles (SAA)
To solve this type, draw a sketch of the triangle roughly, for better
understanding and use sine formula.
Example 6.56: In a triangle ABC, A = 35 17, C = 45 13, b = 42.1. Solve the
triangle.
Solution:
The unknown parts are B, a, c
B = 180 (A + C) = 180 (35 17 + 45 13)
= 99 30
To find the sides, use sine formula

Fig. 5.27

a
sinA
=
b
sinB
=
c
sinC

a =
b sinA
sinB
=
42.1 sin35 17
sin99 30

log a = log 42.1 + log sin35 17 log sin99 30
= 1.6243 + 1

.7616 1

.9940
= 1.3859 1

.9940
= 1.3859 [ 1 + 0.9940] = 1.3919
a = 24.65
Again c =
b sinC
sinB
=
42.1 sin45 13
sin99 30

log c = log 42.1 + log sin45 13 log sin99 30
= 1.6243 + 1

.8511 1

.9940
= 1.4754 1

.9940
= 1.4754 [ 1 + 0.9940] = 1.4814
c = 30.3
Thus B = 99 30, a = 24.65, c = 30.3
235
Type III: Given two sides and the included angle (SAS)
Since two sides and the included angle are given, the third side can be
found by using the proper cosine formula. Then one can apply the sine formula
to calculate the other elements.
Example 6.57: Solve the triangle ABC if a = 5, b = 4 and C = 68.
Solution: To find c, use c
2
= a
2
+ b
2
2ab cosC
c
2
= 25 + 16 2 5 4 cos 68
= 41 40 0.3746 = 26.016
c = 5.1
To find the other two angles, use sine formula.
sinB =
b sinC
c
=
4 sin68
5.1

log sinB = log 4 + log sin68 log 5.1
= 0.6021 + 1

.9672 .7075
= 0.5693 0.7075 = 0.1382
= 1

.8618
B = 46 40
A = 180 (B + C) = 180 (114 40)
= 65 20
Thus B = 46 40, A = 65 20, c = 5.1
Note: To find the angles A and B one can also use the tangent formula
tan
A B
2
=
a b
a + b
cot
C
2


6.7 Inverse Trigonometrical functions (Inverse circular functions)
The quantities sin
1
x, cos
1
x, tan
1
x, are called inverse circular
functions. sin
1
x is an angle , whose sine is x. Similarly cos
1
x denotes an
angle whose cosine is x and so on. The principal value of an inverse function is
that value of the general value which is numerically the least. It may be positive
or negative. When there are two values, one is positive and the other is negative
such that they are numerically equal, then the principal value is the positive one.
For example the principal values of cos
1

\
|
.
|
1
2
is

3
and not

3
though
cos
\
|
.
|

3
=
1
2

236
Note : sin
1
x is different from (sinx)
1
. sin
1
in sin
1
x denotes the inverse of
the circular function. But (sinx)
1
is the reciprocal of sinx i.e.
1
sinx
.
The Domain and Range of Inverse Trigonometrical functions are
given below:
Function Domain Range (Principal Value)
1.
y = sin
1
x
1 x 1

2
y

2

2.
y = cos
1
x
1 x 1 0 y
3.
y = tan
1
x
R

2
< y <

2

4.
y = cosec
1
x
x 1 or x 1

2
y

2
, y 0
5.
y = sec
1
x
x 1 or x 1
0 < y ; y

2

6.
y = cot
1
x
R
0 < y <
Table 6.6
Example 6.58: Find the principal values of:
(i) Sin
1

\
|
.
|
1
2
(ii) sec
1

\
|
.
|
2
3
(iii) tan
1

\
|
.
|

1
3
(iv) sin
1
( 1)
(v) cos
1

\
|
.
|

1
2
(vi) cosec
1
( 2)
Solution:
(i) Let sin
1

\
|
.
|
1
2
= y, where

2
y

2
.
Then sin
1

\
|
.
|
1
2
= y sin y =
1
2
= sin

6
y =

6

The principal value of sin
1

\
|
.
|
1
2
is

6

(ii) Let sec
1

\
|
.
|
2
3
= y, where 0 < y <

2
, then,
sec
1

\
|
.
|
2
3
= y sec y =
2
3
= sec

6
y =

6

The principal value of sec
1

\
|
.
|
2
3
is

6

237
(iii) Let tan
1

\
|
.
|

1
3
= y, where

2
< y <

2

Then tan
1

\
|
.
|

1
3
= y tany =
1
3
= tan
\
|
.
|

6
y =

6

The principal values of tan
1

\
|
.
|

1
3
is

6

(iv) Let sin
1
( 1) = y, where

2
x

2

Then, sin
1
( 1) = y siny = 1
1 = sin
\
|
.
|

2
y =

2

The principal value of sin
1
( 1) is

2

(v) Let cos
1

\
|
.
|

1
2
= y, where 0 y , then
cos
1
\
|
.
|

1
2
= y cosy =
1
2

cos y = cos

3
cos y = cos
\
|
.
|

3
y =
\
|
.
|
2
3

The principal value of cos
1

\
|
.
|

1
2
is
2
3

(vi) Let cosec
1
( 2) = y, where

2
y < 0
cosec
1
( 2) = y cosec y = 2 = cosec
\
|
.
|

6
y =

6

The principal value of cosec
1
(2) is

6

Example 6.59:
(i) If cot
1

\
|
.
|
1
7
= , find the value of cos (ii) If sin
1

\
|
.
|
1
2
= tan
1
x,
find the value of x
Solution:
(i) cot
1

\
|
.
|
1
7
= cot =
1
7
tan = 7
sec = 1 + tan
2
= 1 + 49
238
sec = 5 2
cos =
1
5 2

(ii) tan
1
x = sin
1

\
|
.
|
1
2
=

6
tan
1
x =

6

x = tan

6
=
1
3
x =
1
3

Properties of principal inverse Trigonometric functions:
Property (1):
(i) sin
1
(sinx) = x (ii) cos
1
(cosx) = x (iii) tan
1
(tanx) = x
(iv) cot
1
(cotx) = x (v) sec
1
(sec x) = x (vi) cosec
1
(cosec x) = x
Proof:
(i) Let sinx = y, then x = sin
1
(y) (1)
x = sin
1
(sinx) by (1)
Similarly, the other results may be proved.
Property (2):
(i) sin
1

\
|
.
|
1
x
= cosec
1
x (ii) cos
1

\
|
.
|
1
x
= sec
1
x
(iii) tan
1

\
|
.
|
1
x
= cot
1
x (iv) cosec
1

\
|
.
|
1
x
= sin
1
x
(v) sec
1

\
|
.
|
1
x
= cos
1
x (vi) cot
1

\
|
.
|
1
x
= tan
1
x
Proof:
(i) Let sin
1

\
|
.
|
1
x
= sin =
1
x

cosec = x
= cosec
1
(x)
sin
1

\
|
.
|
1
x
= cosec
1
x
Similarly the other results can be proved.
Property (3):
(i) sin
1
( x) = sin
1
x (ii) cos
1
( x) = cos
1
x
(iii) tan
1
( x) = tan
1
x (iv) cosec
1
( x) = cosec
1
x
(v) sec
1
( x) = sec
1
x (vi) cot
1
( x) = cot
1
x
239
Proof:
(i) Let sin
1
( x) = x = sin
x = sin
x = sin( )
= sin
1
x
= sin
1
x
sin
1
( x) = sin
1
x
(ii) Let cos
1
( x) = x = cos
x = cos = cos ( )
= cos
1
x
= cos
1
x
cos
1
( x) = cos
1
x
Similarly the other results may be proved.
Property (4):
(i) sin
1
x + cos
1
x =

2
(ii) tan
1
x + cot
1
x =

2
(iii) sec
1
x + cosec
1
x =

2

Proof:
(i) Let sin
1
x = x = sin = cos
\
|
.
|

2

cos
1
x =

2

cos
1
x =

2
sin
1
x
sin
1
x + cos
1
x =

2

Similarly (ii) and (iii) can be proved.
Property (5):
If xy < 1, then tan
1
x + tan
1
y = tan
1

\
|
.
|
x + y
1 xy

Proof: Let tan
1
x =
1
and tan
1
y =
2
then tan
1
= x and tan
2
= y
tan (
1
+
2
) =
tan
1
+ tan
2
1 tan
1
. tan
2
=
x + y
1 xy

240

1
+
2
= tan
1

\
|
.
|
x + y
1 xy

tan
1
x + tan
1
y = tan
1

\
|
.
|
x + y
1 xy

Note: Similarly, tan
1
x tan
1
y = tan
1
\
|
.
|
x y
1 + xy

Property (6): sin
1
x + sin
1
y = sin
1
[ ] x 1 y
2
+ y 1 x
2

Proof: Let
1
= sin
1
x and
2
= sin
1
y then sin
1
= x and sin
2
= y
sin(
1
+
2
) = sin
1
cos
2
+ cos
1
sin
2

=
( )
sin
1
1 sin
2

2
+ 1 sin
2

1
sin
2

= [ ] x 1 y
2
+ y 1 x
2


1
+
2
= sin
1
[ ] x 1 y
2
+ y 1 x
2

sin
1
x + sin
1
y = sin
1
[ ] x 1 y
2
+ y 1 x
2

Example 6.60:
Prove that (i) tan
1

\
|
.
|
1
7
+tan
1

\
|
.
|
1
13
= tan
1

2
9
(ii)cos
1

4
5
+ tan
1

3
5
= tan
1

27
11

Solution:
(i) tan
1

\
|
.
|
1
7
+ tan
1

\
|
.
|
1
13
= tan
1

\

|
.
|
|
1
7
+
1
13
1
1
7
.
1
13
= tan
1

\
|
.
|
20
90
= tan
1

\
|
.
|
2
9

(ii) Let cos
1

4
5
= then cos =
4
5
tan =
3
4
= tan
1

3
4

cos
1

4
5
= tan
1

3
4

cos
1

4
5
+ tan
1

3
5
= tan
1

3
4
+ tan
1

3
5
= tan
1

)
`

3
4
+
3
5
1
\
|
.
|
3
4

\
|
.
|
3
4
= tan
1

27
11

Example 6.61: Show that tan
1
+ tan
1
y + tan
1
z = tan
1

\

|
.
|
|
x + y + z xyz
1 yz zx xy

Solution: tan
1
x + tan
1
y + tan
1
z =tan
1

(
x + y
1 xy
+ tan
1
z
241
= tan
1

x + y
1 xy
+ z
1
(x + y)z
1 xy
= tan
1

(
(
x + y + z xyz
1 xy
1 xy xz yz
1 xy

= tan
1

(
(
x + y + z xyz
1 xy yz zx

Example 6.62: Solve tan
1
2x + tan
1
3x =

4

tan
1
2x + tan
1
3x =

4
tan
1

(
(
2x + 3x
1 6x
2
= tan
1
(1)

5x
1 6x
2
= 1 1 6x
2
= 5x 6x
2
+ 5x 1 = 0
i.e. (x + 1) (6x 1) = 0 x = 1 or
1
6

The negative value of x is rejected since it makes R.H.S. negative. x =
1
6

Example 6.63:
Evaluate : (i) sin
\
|
.
|
cos
1

\
|
.
|
3
5
(ii) cos
\
|
.
|
tan
1

3
4
(iii) sin
\
|
.
|
1
2
cos
1

4
5

Solution: (i) Let cos
1

3
5
= . Then, cos =
3
5

sin
\
|
.
|
cos
1
3
5
= sin = 1 cos
2
= 1
9
25
=
4
5

(ii) Let tan
1

\
|
.
|
3
4
= then, tan =
3
4

cos
\
|
.
|
tan
1

3
4
= cos =
1
sec
=
1
1 + tan
2

=
4
5

(iii) Let cos
1

4
5
= ; then cos =
4
5

sin

(
1
2
cos
1

4
5
= sin

2
=
1 cos
2
=
1
10

Example 6.64: Evaluate : cos

(
sin
1

3
5
+ sin
1

5
13

Solution: Let sin
1

3
5
= A sinA =
3
5
cosA =
4
5

Let sin
1

5
13
= B sinB =
5
13
cosB =
12
13

242
cos

(
sin
1

3
5
+ sin
1

5
13
= cos (A + B) = cosA cosB sinA sinB
=
\
|
.
|
4
5
.
12
13

3
5
.
5
13
=
33
65

EXERCISE 6.9
(1) Find the principal value of
(i) sin
1

3
2
(ii) cos
1
\
|
.
|
1
2
(iii) cosec
1
( 1)
(iv) sec
1
( ) 2 (v) tan
1
( ) 3 (vi) cos
1

\
|
.
|

1
2

(2) Prove that (i) 2tan
1

\
|
.
|
1
3
= tan
1

3
4
(ii) 2tan
1
x = sin
1

2x
1 + x
2

(iii) tan
1

\
|
.
|
4
3
tan
1

\
|
.
|
1
7
=

4

(3) Evaluate:
(i) cos
\
|
.
|
sin
1

5
13
(ii)cos

(
sin
1

\
|
.
|

3
5
(iii) tan
\
|
.
|
cos
1

8
17
(iv) sin

(
cos
1

1
2

(4) Prove the following:
(i) tan
1

(
( 1 cosx
1 + cosx
=
x
2
(ii) cos
1
(2x
2
1) = 2cos
1
x
(iii) tan
1

(
( 3x x
3
1 3x
2
= 3tan
1
x (iv) sin
1
( ) 2x 1 x
2
= 2sin
1
x
(5) Prove that 2tan
1

2
3
= tan
1

\
|
.
|
12
5

(6) Prove that tan
1

\
|
.
|
m
n
tan
1

\
|
.
|
m n
m + n
=

4

(7) Solve : tan
1

\

|
.
|
|
x 1
x 2
+ tan
1

\
|
.
|
x + 1
x + 2
=

4

(8) Solve tan
1

\

|
.
|
|
2x
1 x
2
+ cot
1

\

|
.
|
| 1 x
2
2x
=

3
, where x > 0
(9) Solve : tan
1
(x + 1) + tan
1
(x 1) = tan
1

4
7

(10) Prove the following:
(i) cos
1
x + cos
1
y = cos
1
[ ] xy 1 x
2
1 y
2

(ii) sin
1
x sin
1
y = sin
1
[ ] x 1 y
2
y 1 x
2

(iii) cos
1
x cos
1
y = cos
1
[ ] xy + 1 x
2
. 1 y
2

243
OBJECTIVE TYPE QUESTIONS
Choose the correct or most suitable answer
(1) The order of matrix B = [1 2 5 7] is
(1) 1 4 (2) 4 1 (3) 2 1 (4) 1 1
(2) Number of elements in a matrix of order 2 3 is
(1) 5 (2) 2 (3) 3 (4) 6
(3) If A =

(
2 1 4
3 2 1
and X + A = 0 then matrix X is
(1)

(
2 1 4
3 2 1
(2)

(
(
2 1 4
3 2 1

(3)

(
2 1 4
3 2 1
(4)

(
2 1 4
3 2 1

(4) The product of the matrices [7 5 3]

(
(
(
7
3
2
is equal to
(1) [70] (2) [49] (3) [15] (4) 70
(5) The type of the matrix

(
(
(
2 0 0
0 3 0
0 0 3
is
(1) a scalar matrix (2) a diagonal matrix
(3) a unit matrix (4) diagonal and scalar
(6) If [2 x 1]

(
(
(
0
x
3
= [13] then the value of x is
(1) 5 (2) 2 (3) 3 (4) 4
(7) Matrix A is of order 2 3 and B is of order 3 2 then order of matrix BA
is
(1) 3 3 (2) 2 3 (3) 2 2 (4) 3 2
(8) If [3 1 2]B = [5 6] the order of matrix B is
(1) 3 1 (2) 1 3 (3) 3 2 (4) 1 1
(9) The true statements of the following are
(i) Every unit matrix is a scalar matrix but a scalar matrix need not be a
unit matrix.
(ii) Every scalar matrix is a diagonal matrix but a diagonal matrix need
not be a scalar matrix.
244
(iii) Every diagonal matrix is a square matrix but a square matrix need
not be a diagonal matrix.
(1) (i), (ii), (iii) (2) (i) and (ii) (3) (ii) and (iii) (4) (iii) and (i)
(10) The matrix

(
(
(
8 5 7
0 6 4
0 0 2
is
(1) the upper triangular (2) lower triangular
(3) square matrix (4) null matrix
(11) The minor of 2 in

2 3
6 0
is
(1) 0 (2) 1 (3) 2 (4) 3
(12) The cofactor of 7 in

2 3 5
6 0 4
1 5 7
is
(1) 18 (2) 18 (3) 7 (4) 7
(13) If A =

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3
and | A | = 2 then | 3 A | is
(1) 54 (2) 6 (3) 27 (4) 54
(14) In a third order determinant the cofactor of a
23
is equal to the minor of
a
23
then the value of the minor is
(1) 1 (2) (3) (4) 0
(15) The solution of

2x 3
2 3
= 0 is
(1) x = 1 (2) x = 2 (3) x = 3 (4) x = 0
(16) The value of

1 1 1
2x 2y 2z
3x 3y 3z
is
(1) 1 (2) xyz (3) x + y + z (4) 0
(17) If =

1 2 3
3 1 2
2 3 1
then

3 1 2
1 2 3
2 3 1
ie equal to
(1) (2) (3) 3 (4) 3
245
(18) The value of the determinant

1 2 3
7 6 5
1 2 3
is
(1) 0 (2) 5 (3) 10 (4) 10
(19) If A is a square matrix of order 3 then | kA | is
(1) k| A | (2) k | A | (3) k
3
| A | (4) k
3
| A |
(20) If =

1 4 3
1 1 5
3 2 1
and
1
=

2 8 6
2 2 10
6 4 2
then
(1)
1
= 2 (2)
1
= 4 (3)
1
= 8 (4) = 8
1
(21) If
1
=

7 6 1
5 3 8
8 2 4
and
2
=

7 6 1
8 2 4
10 6 16
then
(1)
1
= 2
2
(2)
2
= 2
1
(3)
1
= 2
2
(4)
1
= 2
2

(22) Two rows of a determinant are identical when x = a then the factor of
is
(1) x + a (2) x a (3) (x + a)
2
(4) (x a)
2

(23) The factor of the determinant

x 6 1
2 3x x 3
3 2x x + 2
is
(1) x + 2 (2) x 3 (3) 2x + 1 (4) x + 3
(24) If all the three rows are identical in a determinant on putting x = a then
the factor of is
(1) x a (2) x + a (3) (x a)
2
(4) (x + a)
2

(25) The factor of the determinant

x + a b c
a x + b c
a b x + c
is
(1) x (2) x + b (3) x + c (4) x a + b + c
(26) The value of the determinant

a 0 0
0 b 0
0 0 c
2
is
(1) abc (2) 0 (3) a
2
b
2
c
2
(4) abc
246
(27) The value of the product

1 2
3 1

2 0
1 4
is
(1) 56 (2) 56 (3) 1 (4) 63
(28) If =

a
1
b
1
c
1
a
2
b
2
c
2
a
3
b
3
c
3
and A
1
, B
1
, C
1
are the cofactors of a
1
, b
1
, c
1

then a
1
A
2
+ b
1
B
2
+ c
1
C
2
is equal to
(1) (2) 0 (3) (4)
2

(29) Given that the value of a third order determinant is 11 then the value of
the determinant formed by the respective co-factors as its elements will
be
(1) 11 (2) 121 (3) 1331 (4) 0
(30) A factor of the determinant

(1 + ax)
2
(1 + ay)
2
(1 + az)
2
(1 + bx)
2
(1 + by)
2
(1 + bz)
2
(1 + cx)
2
(1 + cy)
2
(1 + cz)
2
is
(1) x + y (2) a + b (3) x y (4) a + b + c

(31) The position vector of A is 2 i

+ 3 j

+ 4 k

, AB

= 5 i

+ 7 j

+ 6 k


then position vector of B is
(1) 7 i

+ 10 j

+ 10 k

(2) 7 i

10 j

+ 10 k


(3) 7 i

+ 10 j

10 k

(4) 7 i

+ 10 j

10 k


(32) If a

is a non zero vector and k is a scalar such that

k a

= 1 then k is
equal to
(1)

(2) 1 (3)
1

(4)
1


(33) Let a

, b

be the vectors AB

, BC

determined by two adjacent sides


of regular hexagon ABCDEF. The vector represented by EF

is
(1) a

(2) a

+ b

(3) 2 a

(4) b


247
(34) If AB

= k AC

where k is a scalar then


(1) A, B, C are collinear (2) A, B, C are coplanar
(3) AB

, AC

have the same magnitude (4) A, B, C are coincident


(35) The position vectors of A and B are a

and b

. P divides AB in the ratio


3 : 1. Q is the mid point of AP. The position vector of Q is
(1)
5 a

+ 3 b

8
(2)
3 a

+ 5 b

2
(3)
5 a

+ 3 b

4
(4)
3 a

+ b

4

(36) If G is the centriod of a triangle ABC and O is any other point then
OA

+ OB

+ OC

is equal to
(1) O

(2) OG

(3) 3 OG

(4) 4 OG


(37) If G is the centriod of a triangle ABC then GA

+ GB

+ GC

is equal
to
(1) 3 \
|
.
|
a

+ b

+ c

(2) OG

(3) O

(4)
a

+ b

+ c

3

(38) If G is the centriod of a triangle ABC and G is the centroid of triangle
A B C then AA

+ BB

+ CC

=
(1) GG

(2) 3GG

(3) 2GG

(4) 4GG


(39) If the initial point of vector 2 i

3 j

is ( 1, 5, 8) then the terminal


point is
(1) 3 i

+ 2 j

+ 8 k

(2) 3 i

+ 2 j

+ 8 k


(3) 3 i

2 j

8 k

(4) 3 i

+ 2 j

8 k


(40) Which of the following vectors has the same direction as the vector
i

2 j


(1) i

+ 2 j

(2) 2 i

+ 4 j

(3) 3 i

+ 6 j

4) 3 i

6 j


248
(41) If a

= i

+ j

2 k

, b

= i

+ 2 j

+ k

, c

= i

2 j

+
2 k

, then a unit vector parallel to a

+ b

+ c

is
(1)
i

2 j

+ k

6
(2)
i

+ k

3
(3)
2 i

+ j

+ k

6
(4)
i

+ j

+ k

3

(42) If a

= 2 i

+ j

8 k

and b

= i

+ 3 j

4 k

then the magnitude


of a

+ b

=
(1) 13 (2) 13/3 (3) 3/13 (4) 4/13
(43) If the position vectors of P and Q are
2 i

+ 3 j

7 k

, 4 i

3 j

+ 4 k

, then the direction cosines of PQ


are
(1)
2
161
,
6
161
,
11
161
(2)
2
161
,
6
161
,
11
161

(3) 2, 6, 11 (4) 1, 2, 3
(44) If
ax
(x + 2) (2x 3)
=
2
x + 2
+
3
2x 3
then a =
(1) 4 (2) 5 (3) 7 (4) 8
(45) If nPr = 720 nCr, then the value of r is
(1) 6 (2) 5 (3) 4 (4) 7
(46) How many different arrangements can be made out of letters of words
ENGINEERING
(1) 11! (2)
11!
(3!)
2
(2!)
2
(3)
11!
3! . 2!
(4)
11!
3!

(47) The number of 4 digit numbers, that can be formed by the digits
3, 4, 5, 6, 7, 8, 0 and no digit is being repeated, is
(1) 720 (2) 840 (3) 280 (4) 560
(48) The number of diagonals that can be drawn by joining the vertices of an
octagon is
(1) 28 (2) 48 (3) 20 (4) 24
(49) A polygon has 44 diagonals then the number of its sides is
(1) 11 (2) 7 (3) 8 (4) 12
249
(50) 20 persons are invited for a party. The number of ways in which they and
the host can be seated at a circular table if two particular persons be
seated on either side of the host is equal to
(1) 18! 2! (2) 18! 3! (3) 19! 2! (4) 20! 2!
(51) If n is a positive integer then the number of terms in the expansion of
(x + a)
n
is
(1) n (2) n 1 (3) n + 1 (4) n + 2
(52) The values of nC0 nC1 + nC2 nC3 + ( 1)
n
. nCn is
(1) 2
n + 1
(2) n (3) 2
n
(4) 0
(53) The sum of the coefficients in the expansion of (1 x)
10
is
(1) 0 (2) 1 (3) 10
2
(4) 1024
(54) The largest coefficient in the expansion of (1 + x)
24
is
(1) 24C24 (2) 24C13 (3) 24C12 (4) 24C11
(55) The total number of terms in the expansion of [ ] (a + b)
2 18
is
(1) 11 (2) 36 (3) 37 (4) 35
(56) Sum of the binomial coefficients is
(1) 2n (2) n
2
(3) 2
n
(4) n + 17
(57) The last term in the expansion of ( ) 2 + 3
8
is
(1) 81 (2) 27 (3) 3 (4) 3
(58) If a, b, c are in A.P., then 3
a
, 3
b
, 3
c
are in
(1) A.P. (2) G.P. (3) H.P. (4) A.P. and G.P.
(59) If the n
th
term of an A.P. is (2n 1), then the sum of n terms is
(1) n
2
1 (2) (2n 1) (3) n
2
(4) n
2
+ 1
(60) The sum of n terms of an A.P. is n
2
. Then its common difference is
(1) 2 (2) 2 (3) 2 (4) 1
(61) The sum to the first 25 terms of the series 1 + 2 + 3 is
(1) 305 (2) 325 (3) 315 (4) 335
(62) The n
th
term of the series 3 + 7 + 13 + 21 + 31 + is
(1) 4n 1 (2) n
2
+ 2n (3) (n
2
+ n + 1) (4) (n
3
+ 2)
(63) What number must be added to 5, 13 and 29 so that sum may form a
G.P?
(1) 2 (2) 3 (3) 4 (4) 5
250
(64) The third term of a G.P. is 5, the product of its first five terms is
(1) 25 (2) 625 (3) 3125 (4) 625 25
(65) The first term of a G.P. is 1. The sum of third and fifth terms is 90. Find
the common ratio of the G.P.
(1) 2 (2) 10 (3) 3 (4) 3
(66) When the terms of a G.P. are written in reverse order the progression
formed is
(1) A.P. (2) G.P. (3) H.P. (4) A.P. and H.P.
(67) If A, G, H are respectively arithmetic mean, geometric mean and
harmonic mean then
(1) A > G > H (2) A < G > H (3) A < G < H (4) A > G < H
(68) The A.M. between two numbers is 5 and the G.M. is 4. Then H.M.
between them is
(1) 3
1
5
(2) 1 (3) 9 (4) 1
1
4

(69) If a, b, c are in A.P. as well as in G.P. then
(1) a = b c (2) a b = c (3) a b c (4) a = b = c
(70) The A.M., G.M. and H.M. between two positive numbers a and b are
equal then
(1) a = b (2) ab = 1 (3) a > b (4) a < b
(71) e
x
= 1 + x +
x
2
2!
+
x
3
3!
+ is valid for
(1) 1 < x < 1 (2) 1 x 1 (3) all real x (4) x > 0
(72) e
logx
is equal to
(1) x (2) 1 (3) e (4) log
e
x
(73) The equation of x-axis is
(1) x = 0 (2) x = 0, y = 0 (3) y = 0 (4) x = 4
(74) The slope of the straight line 2x 3y + 1 = 0 is
(1)
2
3
(2)
3
2
(3)
2
3
(4)
3
2

(75) The y intercept of the straight line 3x + 2y 1 = 0 is
(1) 2 (2) 3 (3)
1
2
(4)
1
2

(76) Which of the following has the greatest y-intercept in magnitude?
(1) 2x + 3y = 4 (2) x + 2y = 3 (3) 3x + 4y = 5 (4) 4x + 5y = 6
251
(77) If the equation of the straight line is y = 3 x + 4, then the angle made by
the straight line with the positive direction of x-axis is
(1) 45 (2) 30 (3) 60 (4) 90
(78) If the straight lines a
1
x + b
1
y + c
1
= 0 and a
2
x + b
2
y + c
2
= 0 are
perpendicular, then
(1)
a
1
a
2
=
b
1
b
2
(2)
a
1
a
2
=
b
1
b
2
(3) a
1
a
2
= b
1
b
2
(4)
a
1
a
2
=
b
1
b
2
=
c
1
c
2

(79) Which of the following is a parallel line to 3x + 4y + 5 = 0?
(1) 4x + 3y + 6 = 0 (2) 3x 4y + 6 = 0
(3) 4x 3y + 9 = 0 (4) 3x + 4y + 6 = 0
(80) Which of the following is the equation of a straight line that is neither
parallel nor perpendicular to the straight line given by x + y = 0
(1) y = x (2) y x + 2 = 0 (3) 2y = 4x + 1 (4) y + x + 2 = 0
(81) The equation of the straight line containing the point ( 2, 1) and parallel
to 4x 2y = 3 is
(1) y = 2x + 5 (2) y = 2x 1 (3) y = x 2 (4) y =
1
2
x
(82) Equation of two parallel straight lines differ by
(1) x term (2) y term (3) constant term (4) xy term
(83) If the slope of a straight line is
2
3
, then the slope of the line perpendicular
to it, is
(1)
2
3
(2)
2
3
(3)
3
2
(4)
3
2

(84) The graph of xy = 0 is
(1) a point (2) a line
(3) a pair of intersecting lines (4) a pair of parallel lines
(85) If the pair of straight lines given by ax
2
+ 2hxy + by
2
= 0 are
perpendicular then
(1) ab = 0 (2) a + b = 0 (3) a b = 0 (4) a = 0
252
(86) When h
2
= ab the angle between pair of straight lines
ax
2
+ 2hxy + by
2
= 0 is
(1)

4
(2)

6
(3)

2
(4) 0
(87) If 2x
2
+ 3yx cy
2
= 0 represents a pair of perpendicular lines then c =
(1) 2 (2)
1
2
(3) 2 (4)
1
2

(88) If 2x
2
+ kxy + 4y
2
= 0 represents a pair of parallel lines then k =
(1) 32 (2) 2 2 (3) 4 2 (4) 8
(89) The condition for ax
2
+ 2hxy + by
2
+ 2gx + 2fy + c = 0 to represent a pair
of straight lines is
(1) abc + 2fgh bf
2
ag
2
ch
2
= 0 (2) abc 2fgh ag
2
bf
2
ch
2
=0
(3) abc + 2fgh ah
2
bg
2
cf
2
= 0 (4) abc + 2fgh af
2
bg
2
ch
2
=0
(90) The length of the diameter of a circle with centre (2, 1) and passing
through the point ( 2, 1) is
(1) 4 (2) 8 (3) 4 5 (4) 2
(91) Given that (1, 1) is the centre of the circle x
2
+ y
2
+ ax + by 9 = 0. Its
radius is
(1) 3 (2) 2 (3) 11 (4) 11
(92) The equation of a circle with centre (0, 0) and passing through the point
(5, 0) is
(1) x
2
+ y
2
10x = 0 (2) x
2
+ y
2
= 25
(3) x
2
+ y
2
+ 10x = 0 (4) x
2
+ y
2
10y = 0
(93) The radius of the circle x
2
+ y
2
2x + 4y 4 = 0 is
(1) 1 (2) 2 (3) 3 (4) 4
(94) The centre of the circle x
2
+ y
2
+ 2x 4y 4 = 0 is
(1) (2, 4) (2) (1, 2) (3) ( 1, 2) (4) ( 2, 4)
253
(95) If 2x + 3y = 0 and 3x 2y = 0 are the equations of two diameters of a
circle, then its centre is
(1) (1, 2) (2) (2, 3) (3) (0, 0) (4) ( 3, 2)
(96) If the line y = 2x c is a tangent to the circle x
2
+ y
2
= 5, then the value
of c is
(1) 5 (2) 5 (3) 5 5 (4) 5 2
(97) The length of the tangent from (4, 5) to the circle x
2
+ y
2
= 25 is
(1) 5 (2) 4 (3) 25 (4) 16
(98) If the circle has both x and y axes as tangents and has radius 1 unit then
the equation of the circle is
(1) x
2
+ (y 1)
2
= 1 (2) x
2
+ y
2
= 1
(3) (x 1)
2
+ (y 1)
2
= 1 (4) (x 1)
2
+ y
2
= 1
(99) Which of the following point lies inside the circle x
2
+ y
2
4x+2y 5=0
(1) (5, 10) (2) ( 5, 7) (3) (9, 0) (4) (1, 1)
(100) The number of tangents that can be drawn from a point to the circle is
(1) 1 (2) 2 (3) 3 (4) 4
(101) If two circles touch each other externally then the distance between their
centres is
(1) r
1
r
2
(2)
r
1
r
2
(3)
r
2
r
1
(4) r
1
+ r
2

(102) The number of points in which two circles touch each other internally is
(1) 1 (2) 2 (3) 0 (4) 3
(103) One radian is equal to (interms of degree)
(1)
180
11
(2)

180
(3)
180

(4)
11
180

(104) An angle between 0 and 90 has its terminal side in
(1) I quadrant (2) III quadrant (3) IV quadrant (4) II quadrant
254
(105)
1
360
of a complete rotation clockwise is
(1) 1 (2) 360 (3) 90 (4) 1
(106) If the terminal side is collinear with the initial side in the opposite
direction then the angle included is
(1) 0 (2) 90 (3) 180 (4) 270
(107) Area of triangle ABC is
(1)
1
2
ab cosC (2)
1
2
ab sinC (3)
1
2
ab cosC (4)
1
2
bc sinB
(108) The product s(s a) (s b) (s c) is equal to
(1) (2)
2
(3) 2 (4)

s

(109) In any triangle ABC, is
(1) abc (2)
abc
4R
(3)
abc
2R
(4)
abc
R

(110) In triangle ABC, the value of sinA sinB sinC is
(1)

2R
(2)

4R
(3)

2R
2
(4)

4R
2

(111) cosB is equal to
(1)
c
2
+ a
2
b
2
2ca
(2)
c
2
+ b
2
a
2
2bc
(3)
a
2
+ b
2
c
2
2ab
(4)
a
2
+ b
2
+ c
2
2ab

255

ANSWERS
EXERCISE 1.1
(1) (i)

(
(
(
2 3 4
3 4 5
4 5 6
(ii)

(
(
(
1 2 3
2 4 6
3 6 9

(2) x = 0, y = 7, z = 3 (3) x =
3
2
, y =
5
2
, z = 1, w =
1
2

(4) (i)

(
(
2 7
6 10
(ii)

(
(
12 4
2 12
(iii)

(
(
4 4
6 4
(iv)

(
(
4 4
6 4

(v)

(
(
6 1
5 2
(vi)

(
(
6 1
5 2
(vii)

(
(
9 0
14 16
(viii)

(
(
0 8
18 7

(6) X =

(
(
2 2 1
2 3 3
2 1 3
, Y =

(
(
2 5 1
1 1 3
0 7 2
(8) k = 1
(10) x = 1, 3 (11) x = 2, 5 (13)
1
5

(
(
9 3
6 7
(14) x = 1, y = 4
EXERCISE 1.2
(1) 0 (2) (i) non-singular (ii) singular (3) (i) x =
27
8
(ii) x = 9
(4) (i) 0 (ii) 0 (6) a
3
+ 3a
2

EXERCISE 1.3
(3) x = 0, 0, (a + b + c) (4) (a b) (b c) (c a) (ab + bc + ca)
EXERCISE 2.1
(1) AC

= a

+ b

, BD

= b


EXERCISE 2.2
(1) 5 i

+ 5 j

+ 5 k

, 5 3 (2) 185
256
(3) AB

= 3 i

5 k

; BC

= 4 i

7 j

+ 7 k

;
CA

= i

+ 8 j

2 k


AB = 35 , BC = 114 , CA = 69
(5) m = 9 (6)
i

+ 3 j


2
(7)
3 i

7 j

+ 6 k


94

(8)
17 i

3 j

10 k


398
(12) 2 ( ) i

+ j

+ k


(13) PQ

= 4 i

5 j

+ 11 k

;
\

|
.
|
|
4
9 2
,
5
9 2
,
11
9 2

(16) non-coplanar vectors.
EXERCISE 3.1
(1)
1
2(x 1)

1
2(x + 1)
(2)
20
x 3

13
x 2

(3)
3
2(x 1)

7
x 2
+
13
2(x 3)

(4)
1
9(x + 1)

1
9(x + 2)

1
3(x + 2)
2

(5)
4
9(x + 2)
+
4
9(x 1)

1
3(x 1)
2

(6)
2
25(x 2)
+
3
5(x 2)
2

2
25(x + 3)

(7)
7
2x
+
1
x
2
+
9
2(x + 2)

(8)
2
(x 2)
+
3
(x 2)
2

9
(x 2)
3

(9)
1
5(x + 2)
+
4x 8
5(x
2
+ 1)

257
(10)
1
2(x + 1)

(x 3)
2(x
2
+ 1)

(11)
x 5
x
2
2x 1
+
4
3x 2

(12) 1
1
x + 1
+
1
(x + 1)
2

EXERCISE 3.2
(1) 378 (2) 42 (3) 600 (4) 1320 (5) 42840
(6) 512 (7) 153 (8) (i) 27216 (ii) 90000 (9) 5 5! (10) 21
(11) 2
5
(12) 9000 (13) (i) 125 (ii) 60 (14) 2
5
EXERCISE 3.3
(1) (i) 60 (ii) 2730 (iii) 120 (iv)
25!
5!
(v) 15120
(2) 23 (3) 4
(4) 41 (7) 172800 (8) 5040 (9) 60 (10) 93324 (11) 34650
(12) (i) 840 (ii) 20 (13) 9000 (14) 4
5
(15) (i) 8! (ii) 7! (16)
19!
2

EXERCISE 3.4
(1) (i) 45 (ii) 4950 (iii) 1 (2) 23 (3) 3 (4) 45
(5) (i) 12 (ii) 8 (6) 19 (7) 7
EXERCISE 3.5
(1) 66 (2) 200 (3) 210 (4) 425 (5) (i)
15
C
11
(ii)
14
C
10
(iii)
14
C
11

(6) 780 (7) (i) 40 (ii) 116 (8) 1540 (9) 817190
EXERCISE 3.7
(1) (i) 243a
5
+ 2025a
4
b + 6750a
3
b
2
+ 11250a
2
b
3
+ 9375ab
4
+ 3125 b
5

(ii) a
5
10a
4
b + 40a
3
b
2
80a
2
b
3
+ 80ab
4
32b
5

(iii) 32x
5
240x
6
+ 720x
7
1080x
8
+ 810x
9
243x
10

258
(iv) x
11
+
11x
10
y
+
55x
9
y
2
+
165x
8
y
3
+
330x
7
y
4
+
462x
6
y
5
+
462x
5
y
6
+
330x
4
y
7

+
165x
3
y
8
+
55x
2
y
9
+
11x
y
10
+
1
y
11

(v) x
12
+ 12x
10
y
3
+ 60x
8
y
6
+ 160x
6
y
9
+ 240x
4
y
12
+ 192x
2
y
15
+ 64y
18

(vi) x
4
y
2
+ 4x
7/2
y
3/2
+ 6x
3
y
3
+ 4x
5/2
y
7/2
+ x
2
y
4

(2) (i) 58 2 (ii) 152 (iii) 352
(iv) 128a
3
+ 4320a
2
+ 9720a + 1458 (v) 5822 3
(3) (i) 1030301 (ii) 970299 (4) 0.9940
(5) (i) 8C
4
2
4
x
12
(ii) 16C
8
(iii)
16C
8
.a
8
x
4

(iv) 13C
6
.2
6
x
7
y
6
and 13C
7
. 2
7
x
6
y
7

(v) 17C
8
.2
8
1
x
7
and 17C
9
.2
9
1
x
10

(7) 165 (8) (i) 7920 (ii) 2268 (iii)
12
C
4

\
|
.
|
b
c
4
9
8

(9) r = 3 (10) 7, 14
EXERCISE 4.1
(1) (i) 25, 125, 625, 3125 and 15625 (ii)
3
2
,
9
2
,
21
2
, 21,
75
2

(iii) 1, 12, 23, 34, 45 (iv)
2
3
,
3
4
,
4
5
,
5
6
,
6
7

(v)
2
3
, 0,
2
3
, 0,
2
3
(vi)
1
3
,
4
9
,
1
3
,
16
81
,
25
243

(2) (i)
11
5
,
15
7
(ii) 1, 0 (iii)
64
7
,
121
10
(iv) 64, 512
(3) 0,
5
2
, 8,
17
2
, 24,
37
2

259
(4) (i) 2, 2, 1, 0, 1 (ii) 1, 2, 3, 5, 8
(iii)1, 2, 6, 24, 120 (iv) 1, 1, 5, 13, 41
(5)
1
2

(
(
1
1
3
n
(6)
5
4
[5
n
1] (7)
1
2
200
(2
100
1)
EXERCISE 4.2
(1) (i) 4, 7, 10, 13, 16 (ii) 5, 7, 9, 11, 13, 15 (2) (i) 10 (ii) 1 (iii) p
(4)
1
19
(6) 6, 24 (10) 2, 3, 6 (or) 6, 3, 2
EXERCISE 4.3
(1) (i)
1
x
5

(
(
x 8 +
40
x

160
x
2
+ (ii)
1
3
6

(
(
1 +
x
6
+
x
2
18
+
7x
3
324
+
(2) (i) 10.01 (ii) 0.2 (5)
11.9.7.5
4!
x
12

(6)
(r+1) (r+2) (r+3)
1.2.3
x
r

EXERCISE 5.1
(1) x
2
+ y
2
2x + 8y 19 = 0 (2) 3x + y = 2
(3) (i) t = 1 (ii) P(1, 2) (4) y
2
24x
2
= 0
(7) (i) x
2
+ y
2
+ x 3y + 2 = 0 (ii) 15x
2
+ 15y
2
+ 66x 96y + 207 = 0
EXERCISE 5.2
(1) 4x 7y 10 = 0 (2) y = 3x + 4 (3) x y = 6
(4) 11x y = 27 (5) 2x + y = 6 ; x + 2y = 6 (6) x + 3y = 8
(7) 3x 2y = 0 ; 2x y = 0 and 5x 3y = 0 (8)
14
13
units
(9) 2x 3y + 12 = 0 (10) 9x 8y + 10 = 0 ; 2x y = 0
(11) 2x 3y = 6; 3x 2y = 6 (12) x intercept
6
7
; y intercept 2
(13) (8, 0) and ( 2, 0) (14) 3 2 units
260
EXERCISE 5.3
(1)

4
(3) 3x + 2y + 1 = 0 (4) x y 1 = 0 (5) (1, 2)
(6) k = 9 (7)
5 5
2
units (8) p = 1 ; p = 2 (9) 28x + 7y 74 = 0
(10) 5x + 3y + 8 = 0 (11) x + y = 1 (12) 5x + 3y + 5 = 0 (14)

4
;

4

(17) a = 5 (18) a =
16
9
(19)
\
|
.
|
2 ,
5
3
(21) (1, 12) (22) ( 4, 3)
EXERCISE 5.4
(1) a = 2 ; c = 3 (2) /3 (4) 1 (6) 2x
2
3xy 2y
2
= 0
(7) 3x
2
+ 7xy + 2y
2
4x + 7y 15 = 0
(8) k = 1 ; 4x 3y + 1=0 and 3x + 4y 1=0 ; /2
(9) C = 2 ; 6x 2y + 1 = 0 and 2x y + 2 = 0 ; tan
1
(1/7)
(10) k = 10 ; 3x 2y + 1 = 0 and 4x + 5y + 3 = 0
EXERCISE 5.5
(1) (i) (0, 0) ; 1 (ii) (2, 3) ; 22 (iii) (4, 3) ; 7
(iv)
\
|
.
|

2
3
,
2
3
;
2 5
3
(v) (4, 4) ; 10
(2) a = 4 ; b = 2 ; 2x
2
+ 2y
2
+ 4x + 4y 1 = 0
(3) x
2
+ y
2
4x 6y + 11 = 0
(4) x
2
+ y
2
6x 4y 12 = 0
(5) x
2
+ y
2
14x + 6y + 42 = 0
(6) x
2
+ y
2
+ 8x 10y + 25 = 0
(7) 2 10 unit ; 10 square units
(8) x
2
+ y
2
12x + 11 = 0 ; x
2
+ y
2
+ 4x 21 = 0
(9) x
2
+ y
2
3x 6y + 10 = 0
261
(10) x
2
+ y
2
= 1
(11) x
2
+ y
2
5x y + 4 = 0
(12) x
2
+ y
2
6x 8y + 15 = 0
(13) x
2
+ y
2
4x 2y 5 = 0
(14) 16x
2
+ 16y
2
= 1
(15) x =
3
2
cos ; y =
3
2
sin
EXERCISE 5.6
(1) 2 5 units (3) y 1 = 0 (4) outside
(5) (0, 0) and (4, 3) lies inside; ( 2, 1) lies outside
(6) (0, 2) ; (2, 0) (7) 2x + y = 3 5 (8) 5 2 units
(9) (i) x
2
+ y
2
10x 12y + 25 = 0 (ii) x
2
+ y
2
10x 12y + 36 = 0
(10) 4x + 3y + 6 = 0 (11) (i) x + y = 4 2 (ii) x y = 4 2
(12) x 5y + 19 = 0 (13) 40 (14)
\
|
.
|

1
4
,
5
4

EXERCISE 5.7
(3) x
2
+ y
2
2x 6y 39 = 0 (4) x
2
+ y
2
8x + 12y 49 = 0
(6) (i) x
2
+ y
2
2x + 2y + 1 = 0 (ii) x
2
+ y
2
6x 4y 44 = 0
(7) x
2
+ y
2
16x 18y 4 = 0 (8) 3x
2
+ 3y
2
14x + 23y 15 = 0
EXERCISE 6.1
(1) (i)

6
(ii)
5
9
(iii)
10
9
(iv)
16
9
(v)
17
36
(vi)

24

(2) (i) 22 30 (ii) 648 (iii) 17148 (app.) (iv) 105
(3) (i) Q
1
(ii) Q
3
(iii) Q
1

EXERCISE 6.2
(1)
1331
276
(2) (i) sin 60 (ii) cos40 (iii) tan10 (iv) tan60
(v) cosec 60 (vi) sin30 (vii) cos 30
262
(5) (i) cosec A (ii) sec A (iii) cotA (iv) cosA (v) tan A
(8) (i)
1
2
(ii)
3
2
(iii) 2 (iv)
3
2

(v) 1 (vi)
2
3
(vii) 1 (viii)
1
3

(10) (i)
13
3
(ii) 1 (iii) 0 (iv)
2 6
4
(v) 5 (vi) 2 (vii)
7
3

(viii) 11 (ix)
25
12
(x)
149
120

EXERCISE 6.4
(1) (i)
6 2
4
(ii)
6 2
4
(iii) 2 + 3 (iv)
6 + 2
4

(8) (i)
2 + 1
2
,
6 + 2
4
(ii)
2 3
2
,
6 + 2
4

(12) 2 + 1 (14)
15 + 2 2
12

EXERCISE 6.5
(3)
1
2
(6) (i)
9
13
(ii)
117
125

EXERCISE 6.6
(1) (i) sin6 + sin2 (ii) cos 14 + cos2 (iii) sin10 sin4
(iv) cos2A cos4 A (v) sin9A sin3A (vi)
1
2
[sin13 + sin5]
(vii)
1
2
[sin2A sin A] (viii)
1
2
[sin6A + sin A] (ix)
1
2
[cos3+cos /3]
(2) (i) 2sin9A cos4A (ii) 2 cos9A sin4A (iii) 2cos9A cos4A
(iv) 2sin 9A sin4A (v) 2 cos42 sin10 (vi) 2 cos37 cos14
(vii) 2 cos50 sin30 (viii) 2 sin30 cos20 (ix) 2 sin30 cos10
(x) 2 cos
53
2
cos
17
2

EXERCISE 6.7
(1) (i)

4
(ii)

3
(iii)

3
(iv)

6
(v)

3
(vi)

6
(vii)

3

263
(2) (i)
n
2
+ ( 1)
n

12
(ii) n

3
(iii)
2n
3

4

(3) (i) n

4
, n (ii)
n
3
, (2n + 1)

2
(iii) n
(4) (i) 2n

3
(ii) 2n (iii) 2n
2
3
, (2n + 1)

4
(iv)
n
3
, 2n
(5) (i) 2n +

4
(or) n + ( 1)
n

4

(ii) 2n

4
(iii) 2n

4
(iv) 2n, 2n +
2
3

EXERCISE 6.9
(1) (i)

3
(ii)

3
(iii)

2
(iv)
3
4
(v)

3
(vi)
3
4

(3) (i)
12
13
(ii)
4
5
(iii)
15
8
(iv)
3
2
(7) x =
1
2

(8) 2 3 (9) x =
1
2






264
Objective Type Questions Answers (Key)
(1) 1 (2) 4 (3) 2 (4) 1 (5) 2 (6) 4
(7) 1 (8) 3 (9) 1 (10) 1 (11) 1 (12) 2
(13) 1 (14) 4 (15) 1 (16) 4 (17) 2 (18) 1
(19) 3 (20) 3 (21) 2 (22) 1 (23) 4 (24) 3
(25) 1 (26) 3 (27) 2 (28) 2 (29) 2 (30) 3
(31) 1 (32) 4 (33) 4 (34) 1 (35) 1 (36) 3
(37) 3 (38) 2 (39) 2 (40) 4 (41) 4 (42) 1
(43) 1 (44) 3 (45) 1 (46) 2 (47) 1 (48) 3
(49) 1 (50) 1 (51) 3 (52) 4 (53) 1 (54) 3
(55) 3 (56) 3 (57) 1 (58) 2 (59) 3 (60) 1
(61) 2 (62) 3 (63) 2 (64) 3 (65) 3 (66) 2
(67) 1 (68) 1 (69) 4 ( 70) 1 (71) 3 (72) 1
(73) 3 (74) 3 (75) 3 (76) 2 (77) 3 (78) 3
(79) 4 (80) 3 (81) 1 (82) 3 (83) 4 (84) 3
(85) 2 (86) 4 (87) 3 (88) 3 (89) 4 (90) 2
(91) 3 (92) 1 (93) 3 (94) 3 (95) 3 (96) 1
(97) 2 (98) 3 (99) 4 (100) 2 (101) 4 (102) 1
(103) 3 (104) 4 (105) 1 (106) 3 (107) 2 (108) 2
(109) 2 (110) 3 (111) 1

You might also like