M1099

INSTRUCTIONS MANUAL
FEATURES
• Time Telling Mode (Hours, Minutes, Seconds, Date and Day of the
Week)
• Calendar Mode (Month, Date, and Day of the Week)
• (3) 24 Hour Daily and Weekly Alarms
• Hourly Chime: One ‘Beep’ sound every full Hour
• Chronograph Mode: Hours, Minutes, Seconds, and 1/100 of a sec-
ond with Lap Operation
• Countdown Timer
• Second Time Zone
• 12/24 Hour (Military Time)
• Water Resistant as indicated on the watch
• INSTALITE - Electro Luminescent Display
EL LIGHT FEATURE
1. Press ‘D’ in any mode to illuminate the watch face. The backlight will
remain lit for 2 to 3 seconds.
NOTE: EXCESSIVE USE OF LIGHT WILL SHORTEN BATTERY LIFE. SETTING THE 24 HOUR ALARM

SELECTING FEATURES 1. From Time Telling Mode, press ‘B’ twice to enter the Alarm Mode.
2. Press and hold ‘A’. The Alarm Number flashes. Press ‘C’ to select the
1. Time Telling Mode displays Hours, Minutes, Seconds, Date, and Day of Alarm Number (Al-A3).
the Week. 3. Press ‘B’. Alarm Hours flash. Press ‘C’ to adjust the Hours.
2. From Time Telling Mode, press and hold ‘C’. Calendar Mode appears 4. Press ‘B’. Alarm Minutes flash. Press ‘C’ to adjust the Minutes.
and the Month, Date, and Day of the Week are displayed. Release ‘C’ to 5. Press ‘B’. Normal Time/Dual Time Alarms flash. Press ‘C’ to select either
return to Time Telling Mode. Normal Time (Tl) or Dual Time (T2) Alarm.
3. From Time Telling Mode, press ‘B’ once. Chronograph appears. Press 6. Press ‘B’. Daily or Weekly Alarms flash. Press ‘C’ to select either the
‘B’ four times to return to Time Telling Mode. Daily (DA) or the Weekly (WE) Alarm. If the Weekly Alarm is selected, press
4. From Time Telling Mode, press ‘B’ twice. Alarm Mode appears. Press ‘B’ ‘B’ then press ‘C’ to select the Day of the Week.
three times to return to Time Telling Mode. 7.Press ‘B’. then press ‘C’ to activate or deactivate the selected Alarm.
5. From Time Telling Mode, press ‘B’ three times. Timer Mode appears. 8.Press ‘A’ to end set sequence
Press ‘B’ twice to return to Time Telling Mode. 9.Press ‘B’ to return to Time Telling Mode.
6. From Time Telling Mode, press ‘B’ four times. Second Time Zone Mode
appears. Press ‘B’ once to return to Time Telling Mode. ACTIVATING ALARM + HOURLY CHIME

SETTING THE TIME AND CALENDAR 1. While in Alarm Mode, press ‘A’ to select the Alarm (Al-A3), Hourly Chime
(CH), and “Beep” sound (BP).
1. From lime Telling Mode, press and hold ‘A’. Seconds flash. Press ‘C’ to 2. Press ‘C’ to activate or deactivate the selected Alarm, Hourly Chime, or
zero out the Seconds. “Beep” sound.
NOTE: Zeroing out 30 or more seconds automatically adds one minute to NOTE: The Alarm or Chime Symbols appear when the Alarm and Hourly
time. Chime are activated. “ON” indicates that the “Beep” will sound. When the
2. Press ‘B’. Hours flash. Press ‘C’ to advance the Hour. Alarm is activated, the selected Alarm will sound at the preset Alarm Time
NOTE: Pressing and holding ‘C’ will advance digits rapidly. When 12 Hour for 20 seconds or until any button is pressed. When the Hourly Chime is
Format is selected, ‘PM’ indicates ‘p.m.’ times; there is no indicator for activated, the Hourly Chime will sound with one “Beep” eve,y hour on the
‘a.m.’ times. hour.
3. Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes. 3. Press ‘B’ to return to Time Telling Mode.
4. Press ‘B’. Months flash. Press ‘C’ to advance the Months.
5. Press ‘B’. The Date flashes. Press ‘C’ to advance the Date. SECOND TIME ZONE
6. Press ‘B’. The Day of the Week flashes. Press ‘C’ to advance the Day. 1. From Time Telling Mode, press ‘B’ four times to enter the Second Time
7. Press ‘B’. 12/24 Hour Time Format flashes. Press ‘C’ to select either 12 Zone Mode.
Hour Time or 24 Hour (Military) Time. 2. Press and hold ‘A’. Hours flash. Press ‘C’ to advance the Hour.
NOTE: ‘PM’ indicates ‘p.m.’ times in 12 Hour Format; there is no indicator 3. Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
tor ‘a.m.’ times. ‘24HR’ indicates 24 Hour (Military Time). 4. Press ‘A’ to end set sequence.
8. Press ‘A’ to end sequence and return to Time Telling Mode. 5. Press ‘B’ to return to Time Telling Mode.
NOTE: The Second Time (Second Time Zone) Clock may be used to keep
STOPWATCH
track of a foreign time.
1. From Time Telling Mode, press ‘B’ once to enter the Stopwatch Mode.
2. Press ‘C’ to start timing. COUNTDOWN TIMER
3. Press ‘C’ again to stop timing. 1. From Time Telling Mode, press ‘B’ three times to enter the Timer Mode.
4. Press ‘A’ to reset to zero. 2. Press and hold ‘A’. Hours flash. Press ‘C’ to adjust the Hour.
5. Press ‘B’ to return to Time Telling Mode. 3. Press ‘B’. Minutes flash. Press ‘C’ to adjust the Minutes.
SPLIT TIME 4. Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.
5. When the Countdown Timer is set, press ‘A’ to end set sequence and
1. While in the Stopwatch Mode, press ‘C’ to start timing. return to Timer Mode.
2. Press ‘A’ to measure and display Split Times. 6. Press ‘C’ to start the Countdown Timer.
3. Press ‘C’ to stop timing at the end of the event. 7. If desired, press ‘C’ to stop the Countdown Timer. Press ‘C’ again to
4. Press ‘A’ to reveal the final Split Time. resume the Countdown Timer.
5. Press ‘A’ again to reset to zero. NOTE: The Countdown timing will continue in any mode until any button is
6. Press ‘B’ to return to Time Telling Mode. pressed. When the Timer has expired, the alarm will sound for 10 seconds
or until any button is pressed.
8. Press ‘C’ to stop the Timer.
9. Press ‘B’ to return to Time Telling Mode.
 M1099
INSTRUCTIONS MANUAL

CHANGING THE BATTERY USE OUR NATIONWIDE SERVICE CENTERS. YOU

Change the battery when the watch becomes slow, the readout darkens or CANNOT RETURN WATCH FOR SERVICE WHERE
does not appear, or the backlight fails. Before removing the old battery, be
sure to denote its polarity so that the new battery is installed in exactly the
IT WAS PURCHASED.
same way. Replace with the same kind or equivalent only. This watch
contains precise electronic components and should only be opened by If your watch requires cleaning, lubrication, battery changing, or needs
a qualified watch technician. However, it is not necessary to return your a crystal replaced, Armitron Adventure approved Service Centers are
watch to the manufacturer for battery replacement. It is recommended that available in your area. These repair facilities use Armitron Adventure parts
you bring your timepiece to a local jeweler. and components to assure quality and future performance. Free estimates
are available in advance, should you need servicing or repairs not covered
WATER RESISTANCE under the warranty. Repairs covered under the warranty may require proof
of purchase, so retain the purchase receipt.
This is a WATER RESISTANT watch. Do not operate push buttons below
the surface of the water. Should water or condensation appear in the RETURN YOUR WATCH FOR SERVICING
watch, immediately have the watch checked. Water can corrode electron-
ic parts inside the case. Please call (718) 482-4195 for a listing of all approved and authorized
service centers and locations, or visit our website at:
WWW.ARMITRON.COM
YOUR WATCH SHOULD NOT BE RETURNED TO THE PLACE OF
PURCHASE. Carefully pack your watch in a sturdy box (do not send in a
gift box for same will not be returned) and mail to the nearest approved
authorized service station. Because of possible loss, we recommend that
you insure the watch, return receipt requested, when using the mail. If you
do not receive a receipt within a reasonable time, start a tracer through
the originating post office. Never include a special watch band or any
other article of personal value in your shipment.