HS40B /HS50B Spiral Mixer

HS40B / HS50B Spiral Mixer

Electric Diagram
USER MANUAL
KT
FR
L1 FR SQ SB 3
L2
L3
PE K
KM 4
Conversion switch
KM 1 KM 2
KM 1 KM 2 KM 4
SB 1-1 SB 2-1

KM 3

SB 2-2 SB 1-2

KM 1 KM 2 KM 3
X Y Z U V W

Two speed motor

M
3~ SLOW FAST

14
 HS40B /HS50B Spiral Mixer

HS40B / HS50B Spiral Mixer Maintenance and warning

Maintenance of machine
Operation Manual Index Usually, notice the voice and operation conditions of machine. All problems
can be solved in time and ahead of time.
Check the belt loose condition regularly, and adjust in time. The order of ad-
P1. Machine equipment chart justment is as following: Open the top cover, disentangle the four screws for
motor, twist A, B tightly, then screw down the four screws for motor , at last
P2. Shape 1 Full set of box twist C tightly.

P3. Shape 2 Full set of motor

A B
P4. Shape 3 Full set of middle transmission shaft

P5. Shape 4 Full set of spiral hook axle

P6. Shape 5 Full set of bowl axle

C
P7. Shape 6 Circuit board

P8. Shape 7 Full set of safety net Warning

P9. S hape 8 Full set of baffle 1.All maintenance and protection can be operated under shutting
off the power.
P10. Shape 9 Full set of electric box 2.Electricity appliance need operate with professional electrician.
3.The protection net is checked to operate or not before use. Lift up
P11. Installment, adjustment and operation the protection net, shut off the power of control board, then puts
down protection net and electrify the control board.
P12.Damage making and technical data 4.Shut off the total power after using the machine each time.
5.When the machine starts up rapidly, the current is big. In order to
P13. Maintenance and warning protect the machine, the computer program sets the postponing 3
seconds, the sudden slow rotary belongs to design but not damages.
P14. Electricity diagram 6.When the machines is working, putting hands into the barrel or ho-
lding the spiral hook are prohibited.
7.Teenagers can not close to spiral machine.

13
 HS40B /HS50B Spiral Mixer HS40B /HS50B Spiral Mixer

Damage problems solving The complete machine equipment chart

and technical data 15
Damage problems solving 1
15 2
Damages Reasons Methods 3
16 4
When the machine runs autom- Lift up the protection 17 5
atically, press the pause button The computer can net, turn off the power, 6
in the middle way, the machin- not renew. and put down protecti- 7
8
e can not work even re-start up it. on net. 18

The machine stops suddenly and Electricity comp- Open the top of electricity 9
it takes a long time to run overt- onents is too hot door, and press the machi- 19 10
ime. ne red button 11
20
Adjust belt tightly. If the 12

The belt is loose star handle can not be tw- 21 13

isted tightly, take off the
Speed of spiral slows down. or voltage is too
star handle and add 1-2 f- 18
small lat gaskets (Page 13 A/B/C). 14
22
At last, we twist it tightly.
23

Technical data
24 25 26
Model No. HS40B HS50B HS40B HS50B Spare parts name Quantity
Spare parts name Quantity
1 Circuit board 1 15 Belt SPZ850 6
Rating voltage 380-415~ 380-415~ 3-220~ 3-220~
(V) 2 Middle single wheel 1 16 Spiral hook small belt wheel 1
3 Top cover 1 17 Spiral hook big belt wheel 1
Rating power
1200/1800 2800/3600 1200/1800 2800/3600 Middle double joint wheel 1 18 Bearing seat 2
(W) 4
5 Belt SPZ 812 3 19 Bowl 1
Max. spiral quantity
20 25 20 25 6 Top box 1 20 Dividing paste pole 1
(kg)
7 Motot small belt wheel 1 21 Spiral hook 1
Spiral hook speed
240/120 240/120 240/120 240/120 3 22 Bowl axle 1
(r/min) 8 Star handle
9 Bottom cover 1 23 Bowl big belt wheel 1
Bowl speed
(r/min) 24/12 24/12 24/12 24/12 10 Motor 1 24 Belt SPA1257 HS40B 3
11 Middle transmission shaft 1 Belt SPA1382 HS50B 3
12 Middle box 1 25 Bowl initiative wheel 1
Suggestion 1. The paste occupies the capacity of barrel material 30%-60% suitably. Pushing pole 26 Bearing UCFL207 2
13 3
2. Flour water quantity is 50%-57%
3. When the material is full, the machine can not work over 20 minutes 14 Bottom box 1
continually

12 1
 HS40B /HS50B Spiral Mixer HS40B /HS50B Spiral Mixer

Installation adjustment and operation

SHAPE 1 Full set of top cover
Installation and adjustment
1. There is a safety-working zone in this machine, and teenagers can not operate this
6 machine.
2. Remove the packing wooden cartons, and keep the bottom seat sleeper. The mach-
ine is put at the dry and flat ground steadily.
5 3. The electrician with professional electric certificate combines the electrical source
and combines it to the ground.(Yellow wire alternating with green wire is the ground
wire, there is the sign of ground wire on it.)
4.1.When it is checked, and there are no errors to combine is the microcomputer operat-
ion board. The protection net is put on the working location. Get through the electri-
cal source, show time screen and stop button signal.
4.2. When it is checked, and there are no errors to combine in the microcomputer operat-
ion board. The protection net is put on the working location. Get through the electri-
cal source.
5.1. The machine operates when we press the slow speed button in the microcomputer
operation board. If the material barrel's direction is not the same as direction of a-
rrowhead mark on the barrel, stop the machine and cut down power, change locat-
ion on two wires of another three wires (380V~), besides ground wire.
1 5.2. Change the knob to rotation and test the fast speed and slow speed. Press the butt-
on of slow speed, and the spiral machine runs. If the material barrel rotation dire-
ction is not the same as arrowhead direction, stop the machine and cut down pow-
2 3 4 er, change location on two wires of another three wires (380V~), besides ground
wire, test it again.
6. Start up button of slow speed, the machine runs, lift up the protection net, machine
stops. Put down the protection net, the machine re-starts up and runs.
7. Finish all above operation items, the installation and adjustment of themachine is
Names of spare parts Quantity completed.
1 Top cover 1
Note Equipment operation
2 Turn switch 1 Microcomputer operation board:
3 Start switch 2 1 Cleaning by water pipe is prohibited. It is free to choose one of types on operation by hand and automatic operation.
4 Start switch 1 1
Touching the switch and electrical so-
Manual operation
5 Timer relay 1 When the machine is operated by hand, there is no function on showing time on
6 Urgent stop switch 1 urce by wet handkerchief is prohibited. the screen.
When the machine needs slow speed, press the button of slow speed directly.
When the machine needs fast speed, press the button of fast speed directly.
When professional repairman maintai- Turn fast speed to slow speed and slow speed to fast speed, we can press the touc-
ns the spiral machine, we must and p- hing button.
ull out the electrical source.
Automatic operation
It is set on slow speed firstly(At most 30 minutes)
Then it is set on fast speed(At most 30 minutes)
Press automatic, the light of top left corner in this button turns on, press the star-
tup button, finish all above operation items, the machine will run automatically
from slow speed to fast speed.

2 11
 HS40B /HS50B Spiral Mixer HS40B /HS50B Spiral Mixer

SHAPE 9 Full set of electric box SHAPE 2 Full set of motor

Names of spare parts Quantity

1 Screw 1
2 Spring gasket 1
3 Gasket 1
2 4 Motor small belt wheel 1
5 Screw 4
6 Spring gasket 8
7 Gasket 4
6
8 Motor board 2
9 Key 1
10 Motor 1
5
3 11 Screw 4
4

Names of spare parts Quantity

1 Electric box 1
2 Reactor 1
3 Electric board 1
4 AC Contact 1
5 Timer relay 1
6 AC Contact 1

10 3
 HS40B /HS50B Spiral Mixer HS40B /HS50B Spiral Mixer

SHAPE 3 Full set of middle transmission axle

SHAPE 8 Full set of baffle
1

14

4
Names of spare parts Quantity

1 Nut M5 4
2 Gasket 5 4
5
3 Gasket 6 2
5 4 Spring gasket 6 2
5 Screw M6*16 2
6
Quantity 6 Baffle 1
Names of spare parts
1 Screw M8*16 2 7 Baffle bracket 2
2 Spring gasket 8 2 8 Screw M5*12 4
3 Big gasket 2
9 Middle single wheel
4 1
10 Bearing 6205
7 5 2
6 Middle double joint wheel 1
7 Bearing 6307 1
15
8
8 Bearing UCFL207 2
11
9 Screw M14*40 2
12
10 Pushing board 2
9
13 11 Flat gasket 14 2
10
12 Spring gasket 14 2
14
13 Nut M14 2

8 14 Key 8*35 2
11 15 Middle transmission axle 1
12 16 Bowl initiative wheel 1
13
16

3
2

4 9
HS40B /HS50B Spiral Mixer HS40B /HS50B Spiral Mixer

SHAPE 4 Full set of spiral hook

SHAPE 7 Full set of safety net
1

2
3
Names of spare parts Quantity
4 Screw M8*16
1 1
2 Spring gasket 8 1
12 3 Big gasket 1
8
5 4 Spiral hook small belt wheel 1
5 Spiral hook big belt wheel 1
12 6 Bearing 6307 1
7 Nut M12 4
13 8 Spring gasket 12 4
9 Bearing seat 1
10 Screw 12*50 4
11 Bearing 6307 1
6
12 Key 8*35 2
13 Spiral hook axle 1
7
14 Decoration ring adjustment gasket 2
14 8
15 Decoration ring 1
9 16 Spring gasket 10 2

10 17 Screw M10*40 2
Names of spare parts Quantity 18 Spring gasket 16 1
15
1 Screw M10*20 2 11 19 Screw M16*40 1

2 Stop ring 20 2 20 Spiral hook 1

3 Short safety net axle 1

4 Orientation block 1
16
5 Spring gasket 10 2
6 Long safety net axle 1 17

7 Safety net 1 18

8 Micro switch 1
19

20

8 5
 HS40B /HS50B Spiral Mixer HS40B /HS50B Spiral Mixer

SHAPE 5 Full set of bowl SHAPE 6 Circuit board

1
Quantity 2
Names of spare parts
1 Bowl 1
1
2 Spring gasket 10 4
3 Screw M10*18 4
4 Bowl axle 1 7
5 Key 10*35 1
6 Bearing 6307 1
2 Screw M12*50 3
7 4
3 8 Spring gasket 12 4
4
9 Nut M12 4
10 Bearing seat 1 5
6
5
11 Bearing 6307 1
4
7 12 Bowl big belt wheel 1
6
13 Big gasket 1
14 Spring gasket 8 1
15 Screw M8*16 1 Names of spare parts Quantity
8
10
1 Relay 1
9 AC contact device
2 3
3 Start switch 1 1
4 Urgent switch 1
11 Start switch 2
5 1
6 Turn switch 1
7 Connection board 1

12

13

14

15

6 7