ID Quantity ID Quantity Number Part Number Part Description Required Number Part Number Part Description Required 1 See Table B Shaft 1 21 9003.155 Bearing 1 2 1023.325 Key 0or1 22 1069.028 Socket-head Capscrew ③ 6 3 See Table C Shaft Seal 1 23 9001.049 Retaining Ring 1 4 9002.277 Housing 1 24 See Table B Wobble Plate (Cam) 1 5 1009.325 Key (Internal) 1 25 9002.155 2-Part Front Bearing 1 6 1001.003 Screw (Nameplate) 2 26 1387.006 Plug (Drain Port) ④ 1 7 1137.026 Nameplate 1 27 1380.101 Seal Retainer Plate 1 8 See Table B Piston Subassembly 3or6 28 1037.048 Cap Screws⑤ 4 9 237.418 Plate 3or6 ① Torque to 120 lb •ft (163 N •m). 10 237.170-2 Spring 3or6 ② Pin included in Cover Assembly Kit. See Table D. 11 See Table C O-ring 1 ③ Torque to 35 lb •ft (47 N •m). 12 See Table B Barrel 1 ④ Torque to 10 lb •ft (14 N •m). 13 See Table D Cover 1 ⑤ Apply Loctite #242 or equivalent. Torque to 100 lb •in (136 N •m). 14 1147.028 Socket-head Capscrew ① 6 15 9000.061 Cover Pin② 6 16 1033.110 Spring (Outlet) 6 17 1011.016 Checkball (Outlet) 6 18 9000.290 Outlet Check Seat 6 19 See Table C O-ring (Outlet Check Seat) 6 20 9001.562 Washer 1 TABLE B – OUTPUT FLOW, CAMS, PISTONS, BARREL, OPTIONS TABLE C – SEAL KITS Output Cam / Shaft Seal Code Description Kit Number Flow Piston Code Cam Keyed Spline Subassembly① Barrel No Code All Buna-N (Nitrile) KP2R109010 05 9011.101 9002.288 1062.288 9001.900 1255.050 Buna-N (Nitrile) with Disogrin® (Polyure- KP2R109018 D thane) o-rings in the cover 07 9003.101 9002.288 1062.288 9001.900 1255.050 XE All EPR KP2R109012 08 9002.101 9002.288 1062.288 9001.900 1255.050 09 9003.101 9002.288 1062.288 9000.900 1252.050 XV All Fluorocarbon (Viton® or Fluorel®) KP2R109011 12 9002.101 9002.288 1062.288 9000.900 1252.050 Fluorocarbon (Viton® or Fluorel®) with XD Polyurethane (Disogrin®) o-rings in the KP2R109019 ① Full flow model: 6 pistons, Half flow model: 3 pistons. cover and High Pressure Shaft Seal ① Not available with high pressure “H” option. Contact the Dynex Sales department for recommended operating conditions. TABLE D – PORT, COVER KITS Outlet Port(s) Split Code Split Description Port Code (#) / Type Cover Kit Number Full / Half Flow Cover Models: No Code Full flow from single outlet No Code (1) SAE KP2R109050 No Code Full flow from single outlet A (1) Coned and Threaded① KP2R109051 No Code Full flow from single outlet B (1) BSPP KP2R109052 3 Half flow from single outlet (3 inactive Pistons) No Code (1) SAE KP2R109050 3 Half flow from single outlet (3 inactive Pistons) A (1) Coned and Threaded① KP2R109051 3 Half flow from single outlet (3 inactive Pistons) B (1) BSPP KP2R109052 Split-Flow Cover Models: 33 Three-piston output + three-piston output No Code (2) SAE KP2R109330 33 Three-piston output + three-piston output A (2) Coned and Threaded① KP2R109331 33 Three-piston output + three-piston output B (2) BSPP KP2R109332 3x2 Three ports, each with two-piston output No Code (3) SAE KP2R109320 3x2 Three ports, each with two-piston output A (3) Coned and Threaded① KP2R109321 3x2 Three ports, each with two-piston output B (3) BSPP KP2R109322 42 Four-piston output + two-piston output No Code (2) SAE KP2R109420 42 Four-piston output + two-piston output A (2) Coned and Threaded① KP2R109421 42 Four-piston output + two-piston output B (2) BSPP KP2R109422 51 Five-piston output + one-piston output No Code (2) SAE KP2R109510 51 Five-piston output + one-piston output A (2) Coned and Threaded① KP2R109511 51 Five-piston output + one-piston output B (2) BSPP KP2R109512 6x Six ports, each with one-piston output No Code (6) SAE KP2R1096X0 6x Six ports, each with one-piston output A (6) Coned and Threaded① KP2R1096X1 6x Six ports, each with one-piston output B (6) BSPP KP2R1096X2 ① Autoclave Medium Pressure, Butech M/P or equivalent fitting. TYPICAL MODEL CODE PF20 05 H – S XV A – 33 – 1 0
Pump Type Ports Design
Fixed Displacement No Code Inlet No. 16 SAE; Outlet No. 8 SAE Number PF20 Checkball Pump Inlet No. 16 SAE; Outlet 9/16 Medium A Pressure Coned and Threaded, 0.750-14 NPSM Thread Output Flow Modification (At 1800 rpm and Rated Pressure) B Inlet No. 16 SAE; Outlet G 1/2 (BSPP)➂ Number Not recommended for operation above 8000 psi (560 bar). 05 3.0 gpm (11,4 L/min) Contact the fitting manufacturer for the pressure rating 07 4.1 gpm (15,5 L/min) of the specific fittings. High pressure port uses Autoclave Medium Pressure, 08 5.9 gpm (22,3 L/min) Butech M/P or equivalent fitting. 09 6.1 gpm (23,0 L/min) ➂ Outlet port uses British Standard Pipe Parallel fitting. Not recommended for operation above 10 000 psi (700 bar). 12 8.5 gpm (32,1 L/min) Output flows based on typical performance at rated pressure. Refer to performance curves for flows at lower pressures. Split-Flow® Options (6 Piston Pump) Not available with high pressure "H" option. No Code Full flow from single outlet 3 Three-piston output + Three inactive pistons Split-Flow® Cover Models: Operating Pressure 33 Three-piston output + three-piston output No Code Standard Pressure 3X2 Three ports, each with two-piston output H High Pressure 42 Four-piston output + two-piston output Requires “A” or “B” port option. Only available with PF2005 and PF2007. 51 Five-piston output + one-piston output 6X Six ports, each with one-piston output Drive Shaft For outlet port sizes, locations and pump cover dimensions, contact the Dynex Sales department. No Code Keyed, 0.875 inch (22,20 mm) diameter SAE 13-Tooth Spline, 0.873/0.872 inch S (22,17/22,15 mm) Seals No Code Standard: All Buna-N (Nitrile) D Buna-N (Nitrile) with Disogrin® (Polyurethane) o-rings in the cover XE All EPR with High Pressure Shaft Seal XV All Fluorocarbon (Viton® or Fluorel®) with High Pressure Shaft Seal Not available with high pressure “H” option. Contact the Dynex Sales department for recommended operating conditions. Recommended in high pressure applications. USA Headquarters Power Units & Systems 770 Capitol Drive 54 Nickerson Road Pewaukee, WI 53072 Ashland, MA 01721 Tel: +1 (262) 691-0300 Tel: +1 (508) 881-5110 Fax: +1 (262) 691-0312 [email protected] [email protected]
European Sales Middle East Sales
Unit C5 Steel Close, Little End Road, JAFZA 1, Tower A, 11th Floor Eaton Socon, St Neots, Jebel Ali Freezone Cambs. PE19 8TT United Kingdom Dubai, UAE Tel: +44 (0) 1480 213980 Tel: +971 547422353 Fax: +44 (0) 01480 405662 [email protected] [email protected]
Specifications shown were in effect when published.
Since errors or omissions are possible, contact your Dynex Sales representative or the Dynex Sales depar tment fo r t h e m o s t c u r r e n t s p e c i f i c a t i o n s b e fo r e o r d e r i n g . Dynex reser ves the r ight to discontinue products or change designs at any time without incurring any obligation.
