AQUALAND GRAPH

Ver.2

INSTRUCTION MANUAL
 Preface

Thank you for purchasing the communication unit and Aqualand Graph. Aqualand Graph is
designed to transfer dive profile data stored on Hyper Aqualand (Watch) into a personal
computer via the communication unit. The data transferred into the personal computer can be
easily controlled and converted into graphic data. It can manage both character data entered
and diving record as a journal and allows still-frame image/moving image data corresponding to
each journal to be pasted on a journal. Moreover, AQUALAND GRAPH can be used to print out
those data, which is very useful in storing diving records.
We hope that your copy of Aqualand Graph will let you enjoy your sports life all the more.

• All rights to both this manual and software are reserved by CITIZEN WATCH CO., LTD.
(JAPAN)
• No part of this document may be reproduced in any form, in whole or in part, without the
express written permission of CITIZEN WATCH CO., LTD. (JAPAN)
• The contents of this manual are subject to change without prior notice due to any
improvements and updates made.

• Windows 98, Windows Me, Windows 2000 and Windows XP are the registered trademarks of
the Microsoft Corporation, USA.
• The company names and trade names used in this manual are generally the registered
trademarks or trademarks of respective holders.

2
 Notes on Usage

Communication Unit
The communication unit is comprised of precision electronic components and parts. Please
exercise care when handling the unit.

• Store and operate the unit in a location where the temperature is between 5˚C and 40˚C (41˚F
and 104˚F) and the humidity is between 20 and 80% (with no dew condensation).
Furthermore, be sure to avoid locations where sharp changes in temperature are likely to
occur.

• Do not subject the unit to shock or vibration. Please pay special attention to not store the unit
in locations where it may be subject to shock or vibration.

• Keep the unit away from any location where it may be exposed to direct sunlight or a large
amount of dust. Particularly, please pay special attention to not leave the unit in any vehicle.

• Do not disassemble or modify the unit at any time as this may damage the unit.

• Care should be taken to not splash water on or dampen the unit and ensure that the watch
(Hyper Aqualand) is not wet when setting it.

• When cleaning the unit, wipe it off with a soft slightly damp cloth using water or a neutral
detergent. Never use benzene or thinner when cleaning the unit.

• Avoid using the unit near a radio or television set. Operating the communication unit near such
devices may result in difficulties when receiving data.

• CITIZEN WATCH CO., LTD. and CITIZEN TRADING CO., LTD. shall not be responsible for
any losses or lost profits, caused by repairs, difficulties with the unit or software, or any similar
claims from anyone.

AQUALAND GRAPH
• CITIZEN WATCH CO., LTD. and CITIZEN TRADING CO., LTD. shall not be responsible for
any losses, erased programs or data, lost profits or claims from anyone resulting from the use
of this software.

• CITIZEN has checked the operation of various personal computers on which “AQUALAND
GRAPH” operates. “AQUALAND GRAPH” will be applicable to your own personal computer,
but, should any trouble arise, please contact our Service Center.

3
 AQUALAND GRAPH
CONTENTS

Preface ................................................................. 2 8. Add Log Data ................................................. 33

1. System Configuration ...................................... 5 8.1. Create New Log ...................................... 36
1.1. AQUALAND GRAPH Product Configuration ... 5 8.2. Edit ......................................................... 37
1.2. System Requirements .............................. 5 8.3. Delete ..................................................... 37
8.4. Edit Album .............................................. 38
2. Communication Unit ....................................... 7 8.4.1. Add Image ........................................ 39
2.1. Name and Function of Each Part ............ 7 8.4.2. Delete Image .................................... 39
2.2. Connecting the Watch and Computer ..... 7 8.4.3. Change Thumbnails ......................... 39
8.4.4. Import Log ........................................ 40
3. Installing AQUALAND GRAPH ...................... 9 8.4.5. Export Log ........................................ 40

4. Startup and Ending AQUALAND GRAPH ..... 10 9. Diving List ....................................................... 41

4.1. Startup of AQUALAND GRAPH ............. 10 9.1. Sort ......................................................... 41
4.2. Ending of AQUALAND GRAPH .............. 10 9.2. Select Log Item ....................................... 41
9.3. Search .................................................... 42
5. Main Window .................................................. 11 9.4. Print Log List ........................................... 43
5.1. Change Log Display Data ....................... 13
5.2. Menus ..................................................... 14 10. Display Graph .............................................. 44
5.3. Tool Bar .................................................. 15 10.1. Panel Settings ...................................... 45
10.2. Set Line Type ....................................... 46
6. Settings .......................................................... 16 10.3. Print Graph ........................................... 47
6.1. General ................................................... 16
6.1.1. File Locations ................................... 16 11. Print Log ....................................................... 48
6.1.2. Units ................................................. 17 11.1. Print ...................................................... 48
6.1.3. Units when Creating a New Log 11.2. Print Preview ........................................ 49
(Unit : Depth) .................................... 17
6.1.4. Album Thumbnails ............................ 17 12. Create HTML Document .............................. 50
6.1.5. Serial Port ......................................... 17 12.1. Set Background .................................... 51
6.1.6. Select Folder .................................... 18 12.2. Save HTML File .................................... 51
6.2. Customized Items ................................... 19
6.2.1. Items ................................................. 20 13. Trip Summary ............................................... 52
6.2.2. Contents ........................................... 20 13.1. Register Trip Summary ......................... 52
6.2.3. Initial definition .................................. 20 13.2. Customize ............................................. 54
6.3. Fixed Items ............................................. 21 13.3. Trip Summary Display .......................... 55
6.3.1. Diver ................................................. 21 13.4. Edit Trip Summary ................................ 56
6.3.2. Weather ............................................ 22 13.5. Delete Log ............................................ 57
6.3.3. Tank Material .................................... 23 13.6. List of Trip Summaries .......................... 57
6.3.4. Diving Service (D. Service) .............. 24
6.3.5. Dive Style ......................................... 25 14. Limiting Values ............................................. 58
6.3.6. Water Conditions (Water Cond.) ...... 26 14.1. No.of Registrations ............................... 58
6.3.7. Diving Suit / Inner Wear ................... 27 14.2. No. of Entered Characters .................... 59
6.3.8. Equipment ........................................ 28 14.3. Entered Values ..................................... 60
6.4. Dive Locations ........................................ 29
6.4.1. Location ............................................ 30 15. Communication Unit Specifications .............. 61
6.4.2. Dive Site ........................................... 30

7. Transfer .......................................................... 31
7.1 Connecting the Communication Unit ....... 32
7.2 Transfer ................................................... 32

4
 1. System Configuration
1.1. AQUALAND GRAPH Product Configuration
1AQUALAND GRAPH INSTALL MANUAL ........................... 1
2Communication unit ............................................................ 1
3AQUALAND GRAPH CD-ROM .......................................... 1

1.2. System Requirements

In addition to the products mentioned above, the following equipment is necessary in order to operate AQUALAND GRAPH.

1Personal Computer
Personal computer equipped with a serial por t and able to operate with Windows 98, Windows Me, Windows 2000 or
Windows XP (Pentium 200 MHz or more recommended)
2System Software
Windows 98, Windows Me, Windows 2000 or Windows XP
3Memory Capacity
32 MB or more (64 MB or more is recommended)
4Hard Disk
15 MB (or more) free space is required in the Windows directory and 10 MB (or more) free space is required in the install
directory when installing the application. (minimum of 100 MB recommended).
5Monitor
Color display having resolution of SVGA (resolution: 800 M 600, 256 colors) or better compatible with Windows 98,
Windows Me, Windows 2000 or Windows XP
6Serial Port and RS-232C Straight Through Cable
The cable should be shielded and connected as follows:
(A high-speed serial port is recommended.)

• If the serial communications port of your personal computer has 9 pins:

PC Side Communication Unit Side
9 Pins Female 2 ---------------------------------- 3 25 Pins Male
3 ---------------------------------- 2
04 ---------------------------------- 20
5 ---------------------------------- 7
6 ---------------------------------- 6
7 ---------------------------------- 4
8 ---------------------------------- 5

• IIf the serial communications port of your personal computer has 25 pins:
PC Side Communication Unit Side
25 Pins Female 1 ---------------------------------- 1 25 Pins Male
2 ---------------------------------- 2
3 ---------------------------------- 3
4 ---------------------------------- 4
5 ---------------------------------- 5
6 ---------------------------------- 6
7 ---------------------------------- 7
20 ---------------------------------- 20

5
7Disk Drive
A CD-ROM disk drive (Required during installation).
8Hyper Aqualand (Watch)
9Printer
A printer supported by the Windows system software running on your personal computer
0Web Browser
A Web browser is required for HTML preview of journal and others. It must be linked with the HTML files when relating
files.

6
 2. Communication Unit
The communication unit is used to transfer data (log data / profile data) stored in the watch to your personal computer.
There are two different product sizes, the CMUT-01, with no stand for the communication unit, and the CMUT-03, which
comes with a stand.

2.1. Name and Function of Each Part

• RS-232C Connector
Used to connect the communication unit with the subject computer via the serial adapter cable.
• Connection Pins
Used to connect the transfer terminal of the watch. There are three pins; the center pin is put in contact with the transfer pin
of the watch, while the other two pins are put in contact with the watch case.
• Fixing Claw
Used to keep the watch pressed against the connection pins.
• Detachable stand: for use with the CMUT-03
This is attached to the main body of the communications unit.
The stand should always be used with the CMUT-03 communications unit.
Attachment method: The stand is attached by sliding it horizontally over the metal fixtures on the underside of the main
communications unit.

RS-232C connector
RS-232C connector

Detachable stand

Fixing claw Connection pins Fixing claw Connection pins

<CMUT-01> <CMUT-03>

<Figure 1>

2.2. Connecting the Watch and Computer

• How to Connect:
Follow the steps below to connect the watch to your personal computer.
1Make sure that the power supply to the personal computer is turned off.
2Connect the serial communication port of your personal computer to the connector of the communication unit using the
RS-232C serial adapter cable.
3Turn on the power to your personal computer and start up the AQUALAND GRAPH system.
4Set the watch to the transfer mode, and then recall the data. (Refer to the User’s Manual for Watch)
5Insert the watch so that the transfer pin comes into contact with the center of the three connector pins.
Then, push the watch down into the holder (refer to Figure 2 below).

7
 <Figure 2>

• How to Disconnect:
Take hold of the band portion of the watch and raise it from the side opposite to the connector pins (fixing claw side) until it
is separated from the fixing claw. Quit AQUALAND GRAPH operation and turn off the power supply to your personal
computer before disconnecting the serial adapter cable.

For users who use the CMUT-01 type communication unit by

metal-band watch
Precautions for data transmission
Hold the watch and the communication unit with your fingers as shown in the illustration below during data transmission. Be
sure to hold it in place until the Aqualand Graph has finished receiving data.
When a metal-band model Hyper Aqualand is set onto the communication unit, the wristband touching the unit base may lift
the watch slightly from the unit during data transmission. This may cause the terminals to lose contact, and data may not be
transmitted correctly.

8
 3. Installing AQUALAND GRAPH
Install Aqualand Graph according to the procedure described below.
(1) Turn on the power of the PC and confirm that operating system (OS) has started up.
* When using Windows 2000 or Windows XP, it is necessary to login to Windows as an “Administrator”.
(2) Place the CD-ROM provided in the CD-ROM drive of the PC. The AQUALAND GRAPH installation menu is displayed
automatically.
If the installation menu is not displayed, double-click on "install.exe" contained on the CD-ROM inserted into the CD-ROM
drive to display the installation menu.
(3) Click on "Install AQUALAND GRAPH 2 V21". Installation begins and the next screen shown is displayed.

(4) Confirm the contents and then click on "NEXT" to display the next screen.

(5) If you want to change the directory where the applications are installed, click on "Browse" and change to the desired
directory. Confirm the contents and click on "NEXT" to install the applications. The next screen is then displayed.

(6) Click on "Finish" to complete the installation procedure.

9
 4. Startup and Ending AQUALAND GRAPH
4.1. Startup of AQUALAND GRAPH
Select “Program” and then “AqualandGraph 2 V21” from the “Start” button in the task bar.

4.2. Ending of AQUALAND GRAPH

Either click on the [X] button in the upper right hand corner of the <Main Window> or select the [File (F)] menu and then
select [End (X)] in the pull-down menu.

10
 5. Main Window
This is the window that is displayed first when [AQUALAND GRAPH] is started up.
The <Main Window> is composed of the following three areas.

This area displays log data on the left side of the main window.
Log Display Area
Logs cannot be edited in this area.
This area displays images on the right side of the window.
Album Display Area
This is displayed by switching from the diving list.
This area displays diving data in line units on the right side of the window.
Diving List
This is displayed by switching from the album display.

You can move to another window by either clicking a button in the tool bar of this menu with the mouse or selecting a menu.
A help message is displayed when the mouse cursor is positioned at any of the buttons in the tool bar.

Log Display Area

11
Main Window in Album Display Mode

When the main window is displayed in the diving list display mode, either click the button with the mouse or select
[Switch to Album (A)] of the [Display (L)] menu to switch to the album display mode.
When an album image is clicked with the mouse, an original size dialogue box is displayed in the case of a still picture. In the
case of an animated image, the related application in the AVI file is started up and the animated image is played back.
Album registration is performed from the <Edit> dialogue box. (Refer to sections “8. Add Log Data” and “8.4. Edit Album” for
further details.)

12
Main Window in Diving List Display Mode

When the main window is displayed in the album display mode, either click the button with the mouse or select
[Switch to Log List (L)] of the [Display (L)] menu to switch to the diving list display mode.

Attribute Icons
Icons indicating attributes are displayed on the left side of the diving list.

Album Data is registered.

Registered in Trip Summary.

5.1. Change Log Display Data

When the line in the <Diving List> for which a log is desired to be displayed is clicked with the mouse, the selected log is
displayed in the <Log Display Area>.
In addition, the displayed log data can be changed by clicking on the MOVE button on the tool bar with the mouse.

13
5.2. Menus
Files (F)

Create New Log (N) Creates a new log without transferring data from the watch.

Edit (E) Edits the log that is currently displayed.

Delete (D) Deletes data selected in the <Diving List>.

Create HTML Document (H) Creates a web page of data selected in the <Diving List>.

Print (P) Prints data selected in the <Diving List>.

Print Log List (L) Prints the entire <Diving List>.

This function is enabled in the Album Display Mode.

Trip Summary (T)
Data selected in the <Diving List> is registered in the <Trip Summary>.
This function is enabled in the Album Display Mode.
List of Trip Summaries (S)
A list of registered <Trip Summaries> is displayed.

Exit (X) Ends AQUALAND GRAPH.

Display (L)

Search (S) Extracts data desired to be displayed from the <Diving List>.

Select Log Item (I) Selects a log item desired to be displayed from the <Diving List>.

Graph (G) Displays a graph of data selected in the <Diving List>.

Window is displayed in the Diving List Display Mode.

Switch to Album (A)
Switches window to the Album Display Mode.
Window is displayed in the Album Display Mode.
Switch to Log List (L)
Switches window to the Diving List Display Mode.

Album Thumbnails (T) Selects whether thumbnail images are to be displayed in the <Album Display Area>.

Preferences (P)

General (G) Registers information required for operating AQUALAND GRAPH.

Customized Items (C) Registers customized user settings that are written into a log.

Fixed Items (F) Registers the diver, weather and other fixed items that are written into a log.

Dive Locations (L) Registers locations that are written into a log.

14
Option (O)

Transfer (T) Transfers data from the watch.

Export Log (E) Exports all or a portion of diving data.

Loads exported data.

Import Log (I)
DOS, Ver. 1, Ver. 2.0 and Ver. 2.1 log data are also imported.

Help (H)

Help Topics (H) Displays help topics.

About Aqualand Graph (A) Displays the version of AQUALAND GRAPH.

5.3. Tool Bar

Displayed in the Diving List Display Mode.

Album Display Button
[Switch to Album (A)] of the [Display (L)] menu.
Displayed in the Album Display Mode.
Diving List Display Button
[Switch to Log List (L)] of the [Display (L)] menu.

Graph Button [Graph (G)] of the [Display (L)] menu.

Print Button [Print (P)] of the [Files (F)] menu.

Create HTML Document Button [Create HTML Document (H)] of the [Files (F)] menu.

Create New Log Button [Create New Log (N)] of the [Files (F)] menu.

Edit Button [Edit (E)] of the [Files (F)] menu.

Search Button [Search (S)] of the [Display (L)] menu.

Moves back to the previous data of the <Diving List> displaying the current
Back Button
log and displays the log.
Moves ahead to the next data of the <Diving List> displaying the current
Next Button
log and displays the log.

Transfer Button [Transfer (T)] of the [Option (O)] menu.

Export Log Button [Export Log (E)] of the [Option (O)] menu.

This function is enabled in the Album Display Mode.

Trip Summary Button
[Trip Summary (T)] of the [Files (F)] menu.
This function is enabled in the Album Display Mode.
List of Trip Summaries Button
[List of Trip Summary (S)] of the [Files (F)] menu.

15
 6. Settings
6.1. General
Settings for information required for operating AQUALAND GRAPH are registered.
The <General> dialogue box is displayed when [General (G)] is selected from the [Preferences (P)] menu of the <Main Window>.

Registration is finalized when the button is clicked with the mouse, after which the program returns to the
<Main Window>. Since finalized registration contents are stored in memory by AQUALAND GRAPH, it is not necessary to
register them each time it is started up.
Changes are canceled by either clicking the button or clicking the button in the upper right corner of the
dialogue box with the mouse, after which the program returns to the <Main Window>.

6.1.1. File Locations

Designate a folder for saving transferred data. A maximum of 9999 sets of data can be stored in a single data save folder. In the
case of storing 9999 sets of data consisting of a single dive having a duration of 1 hour, roughly 400 MB of disc space are required.
During installation, a data save folder named "LOG" is created below the folder in which AQUALAND GRAPH is installed.

When the button is clicked with the mouse, the <Select Folder> dialogue box is displayed. Specify a save folder
in this dialogue box when desiring to change the data save folder. (refer to section “6.1.6. Select Folder” for further details).

16
6.1.2. Units
Set the units to be used in the logs. Units can be entered using up to 10 letters or numbers. Registered data is not changed
even if the units are changed.

Weight Enter the units to be displayed for weight.

Capacity Enter the units to be displayed for tank size.

Pressure Enter the units to be displayed for Pres. In and for Pres. Out of the tank.

Air Consum. Enter the units to be displayed for consumption by the tank.

6.1.3. Units when Creating a New Log (Unit : Depth)

Specify the units for depth to be used when creating a new log with Create New Log.

Meter Meters are used for the units of depth, and °C are used for the units of temperature.

Feet Feet are used for the units of depth and °F are used for the units of temperature.

6.1.4. Album Thumbnails

Set the album display mode of the <Album Display Area> of the <Main Window>.
If <Album Thumbnails> is checked, images and comments are displayed. If the check is removed, only comments are
displayed without displaying images.

6.1.5. Serial Port

Select a serial port.

17
6.1.6. Select Folder
You can select a folder.
In the case of starting up from Import Log the button is not displayed.

When the button is clicked with the mouse, the <Create Folder> dialogue box is displayed.
A folder can be created at this point.

18
6.2. Customized Items
Customized user settings and their contents to be saved in a log are registered.
The <User customized items> dialogue box is displayed when [Customized Items (C)] is selected from the [Preferences (P)]
menu of the <Main Window>.
Contents can be registered while classifying for each item. When an item is selected from the list of items in the upper left
part of the dialogue box, the contents registered for each item are displayed in the list of contents in the upper right part of the
dialogue box. Register contents that do not require classification for individual items as "Common" items.

Registration is finalized when the button is clicked with the mouse, after which the program returns to the
<Main Window>. Since finalized registration contents are stored in memory by AQUALAND GRAPH, it is not necessary to
register them each time it is started up.

Changes are canceled by either clicking the button or clicking the button in the upper right corner of the
dialogue box with the mouse, after which the program returns to the<Main Window>.
Addition or changes to data are made in the <Add> or <Modify> dialogue box.

When data is entered followed by clicking the button with the mouse, the program returns to the <User
customized items> dialogue box, and the edited data is shown in the list.

19
6.2.1. Items
Items can be entered using up to 12 letters or numbers. A maximum of 1000 contents can be registered.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.
Although items can be added in the form of "Common" items, they are distinguished from the "Common"
items provided by AQUALAND GRAPH.
Displays the <Modify> dialogue box and changes the names of selected items. A check for duplicated data
is not performed. Information relating to the contents is retained even if the name of an item is changed.
"Common" items cannot be changed.
Deletes a selected item. The contents registered for that item are also deleted. "Common" items cannot be
deleted.

Moves the display position of a selected item up by one. "Common" items cannot be moved.

Moves the display position of a selected item down by one. "Common" items cannot be moved.

* "Common" items save item contents in the case of loading a user environment from a DOS version or Ver. 1. In addition,
contents registered for "Common" can be referred to regardless of the item selected during log entry.

6.2.2. Contents
Contents can be entered using up to 20 letters or numbers. A maximum of 1000 contens can be registered.

Displays the <Add> dialogue box and adds contents. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected contents. A check for duplicated data is not
performed.

Deletes selected contents.

Moves selected contents to a different item.

Moves the display position of selected contents up by one.

Moves the display position of selected contents down by one.

6.2.3. Initial definition

Data that is initially displayed for Customized Items during log editing is registered. Items and contents can be selected from

a list by clicking on the button with the mouse. They can also be entered from the keyboard.

20
6.3. Fixed Items
The following items that are saved in a log are registered.

*Diver
*Weather
*Tank Material
*D.Service (Diving Service)
*Dive Style
*Water Cond. (Water Condition)
*Diving Suit / Inner Wear
*Equipment

The <Fixed Items> dialogue box is displayed when [Fixed Items (F)] is selected from the [Preferences (P)] menu of the <Main
Window>.

Registration is finalized when the button is clicked with the mouse, after which the program returns to the
<Main Window>. Since finalized registration contents are stored in memory by AQUALAND GRAPH, it is not necessary to
register them each time it is started up.

Changes are canceled by either clicking the button or clicking the button in the upper right corner of the
dialogue box with the mouse, after which the program returns to the<Main Window>.

Addition or changes to data are made in the <Add> or <Modify> dialogue box.

When data is entered followed by clicking the button with the mouse, the program returns to the <Fixed
Items> dialogue box, and the edited data is shown in the list.

6.3.1. Diver
The name of the diver can be entered using up to 20 letters or numbers. A maximum of 1000 divers can be registered.

21
 Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

Registers the data to be initially displayed for "Diver" in the <Edit> dialogue box.
Default diver A diver can be selected from the diver list by clicking the button with the mouse. A diver name
can also be entered from the keyboard.
Registers the data to be initially displayed for "Buddy" in the <Edit> dialogue box.
Default buddy A buddy can be selected from the diver list by clicking the button with the mouse. A buddy name
can also be entered from the keyboard.
Registers the data to be initially displayed for "Dive Master" in the <Edit> dialogue box.
Default dive master A dive master can be selected from the diver list by clicking the button with the mouse.
A dive maste can also be entered from the keyboard.

6.3.2. Weather
The weather can be entered using up to 12 letters or numbers. A maximum of 100 weather conditions can be registered.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

22
6.3.3. Tank Material
The tank material can be entered using up to 10 letters or numbers. A maximum of 100 tank materials can be registered.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

23
6.3.4. Diving Service (D.Service)
The diving service (D.Service) can be entered using up to 20 letters or numbers. A maximum of 100 diving services can be
registered.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

24
6.3.5. Dive Style
Dive style can be entered using up to 10 letters or numbers. A maximum of 100 dive styles can be registered.

The following operations are available for both <Access> and <Water Body>.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

Registers the data to be initially displayed for "Dive Style" in the <Edit> dialogue box. A dive style can be
Initial definition selected from the dive style list by clicking the button with the mouse. A dive style can also be entered
from the keyboard.

25
6.3.6. Water Conditions (Water Cond.)
Water conditions (Water Cond.) can be entered using up to 10 letters or numbers. A maximum of 100 water conditions can
be registered.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

26
6.3.7. Diving Suit / Inner Wear
Diving Suit / Inner Wear can be entered using up to 20 letters or numbers. A maximum of 100 items can be registered.

The following operations are available for both Diving Suit and Inner Wear.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

Registers the data to be initially displayed for "Diving Suit" and "Inner Wear" in the <Edit> dialogue box. A
Initial definition Diving Suit and Inner Wear can be selected from the list by clicking the button with the mouse. Diving
Suit and Inner Wear can also be entered from the keyboard.

27
6.3.8. Equipment
Equipment can be entered using up to 10 letters or numbers. A maximum of 100 equipment items can be registered.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

28
6.4. Dive Locations
Locations and dive sites to be saved in a log are registered.
The <Dive Locations> dialogue box is displayed when [Dive Locations (L)] is selected from the [Preferences (P)] menu of the
<Main Window>.
Dive sites can be registered while classifying for each location. When a location is selected from the list of locations in the
upper left part of the dialogue box, the dive sites registered for each location are displayed in the list of dive sites in the upper
right part of the dialogue box.

Registration is finalized when the button is clicked with the mouse, after which the program returns to the
<Main Window>. Since finalized registration contents are stored in memory by AQUALAND GRAPH, it is not necessary to
register them each time it is started up.

Changes are canceled by either clicking the button or clicking the button in the upper right corner of the
dialogue box with the mouse, after which the program returns to the <Main Window>.

Addition or changes to data are made in the <Add> or <Modify> dialogue box.

When data is entered followed by clicking the button with the mouse, the program returns to the <Dive
Locations> dialogue box, and the edited data is shown in the list.

29
6.4.1. Location
Locations can be entered using up to 20 letters or numbers. A maximum of 1000 locations can be registered.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item. All dive sites registered for the location are also deleted.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

Registers the data to be initially displayed for "Location" in the <Edit> dialogue box. A location can be
Initial definition selected from the location list by clicking the button with the mouse. A location can also be entered
from the keyboard.

6.4.2. Dive Site

Dive sites can be entered using up to 20 letters or numbers. A maximum of 100 dive sites can be registered.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes selected items. A check for duplicated data is not
performed.

Deletes a selected item. The contents registered for that item are also deleted.

Moves a selected dive site to a different location.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

Registers the data to be initially displayed for "Dive Site"in the <Edit> dialogue box. A dive site can be
Initial definition selected from the dive site list by clicking the button with the mouse. A dive site can also be entered
from the keyboard.

30
 7. Transfer
Data is transferred from the watch to a personal computer.

The <Transfer> dialogue box is displayed either by clicking the button from the <Main Window>, or by selecting
[Transfer (T)] from the [Option (O)] menu.

Clicking the button returns the program to the <Main Window>.

A maximum of 9999 data sets can be stored in a single data save folder. Additional data cannot be stored.

The <Serial port> dialogue box is displayed when the button is clicked with the mouse.
The number of the serial port is set here that is used to connect Hyper Aqualand and the communication unit from the watch.

31
7.1 Connecting the Communication Unit
First connect the communication unit (CMUT-01 or CMUT-03) to the serial port of the personal computer in order to transfer
data from Hyper Aqualand.Refer to the Hyper Aqualand user's manual for information on using Hyper Aqualand.

7.2 Transfer
AQUALAND GRAPH transfers data with Hyper Aqualand attached to the communication unit. Refer to the Hyper Aqualand
user's manual for information on using Hyper Aqualand.

1. Switch Hyper Aqualand to the transfer mode.

2. Operate Hyper Aqualand to call up the data to be transferred.
3. Insert the Hyper Aqualand transfer pin into the center connection pin of the three connection pins.

4. Data is sent from Hyper Aqualand when the button is clicked with the mouse, after which the personal
computer begins to receive that data. When transfer is completed, a dialogue box is displayed informing the user of
completion. If transfer has not been performed properly, a communication error warning message is displayed. If this
happens, check the connection of the RS-232C connector and the connection between Hyper Aqualand and the

communication unit. Then click the button again with the mouse.
5.When transferring different data, repeat the above procedure starting from step 2. If Hyper Aqualand is not in the
transfer mode, repeat the procedure starting from step 1.

32
 8. Add Log Data
Log data can be added to data that has been transferred from the watch.

When the button of the <Main Window> is clicked with the mouse or [Edit (E)] of the [Files (F)] menu is selected, the
<Edit> dialogue box is displayed for the log currently displayed.
The portion of transferred data pertaining to a log that has been created by transferring data from the watch cannot be edited.

33
 Data is displayed that was registered in the <Location Initial definition> of <Dive Locations> .

Location When the button is clicked with the mouse, a list of registered locations is displayed, and a
location can be selected from that list. In addition, a location can also be registered by entering from
the keyboard.
Data is displayed that was registered in the <Dive Site Initial definition> of <Dive Locations>.

Dive Site When the button is clicked with the mouse, a list of registered dive sites is displayed, and a dive
site can be selected from that list. In addition, a dive site can also be registered by entering from the
keyboard.
Data is displayed that was registered in the <Diving Service Initial definition> of <Fixed Items>.
D. Service When the button is clicked with the mouse, a list of registered diving services is displayed, and a
(Diving Service) diving service can be selected from that list. In addition, a diving service can also be registered by
entering from the keyboard.

Data is displayed that was registered in the <Default diver> of <Fixed Items>. When the button is
Diver clicked with the mouse, a list of registered divers is displayed, and a diver can be selected from that
list. In addition, a diver can also be registered by entering from the keyboard.

Data is displayed that was registered in the <Default dive master> of <Fixed Items>. When the
Dive Master button is clicked with the mouse, a list of registered dive masters is displayed, and a dive master can
be selected from that list. In addition, a dive master can also be registered by entering from the
keyboard.

Data is displayed that was registered in the <Default buddy> of <Fixed Items>. When the button
Buddy is clicked with the mouse, a list of registered buddies is displayed, and a buddy can be selected from
that list. In addition, a buddy can also be registered by entering from the keyboard.

Safety Stop Enter the depth and time as numerical values.

A list of weather conditions registered with <Fixed Items> is displayed when the button is clicked
Weather with the mouse, and a weather condition can be selected from that list. In addition, weather
conditions can also be registered by entering from the keyboard.

Temp. Enter the air temperature as a numerical value.

Visibility Enter the visibility as a numerical value.

A list of dive styles registered with <Fixed Items> is displayed when the button is clicked with the
Dive Style mouse, and a dive style can be selected from that list. In addition, a dive style can also be registered
by entering from the keyboard.

Water Cond. A list of water conditions registered with <Fixed Items> is displayed when the button is clicked
(Water Condition) with the mouse, and a weather condition can be selected from that list. In addition, water conditions
can also be registered by entering from the keyboard.

Tank Capacity Enter the tank size as a numerical value.

Pres. In (Pressure In) Enter the starting pressure of the tank as a numerical value.

Pres. Out
Enter the ending pressure of the tank as a numerical value.
(Pressure Out)

When the button is clicked with the mouse when <Pres. In>, <Pres. Out>, <Ave.
Depth> and <Dive Time> have been registered, the rate of surface air consumption is calculated. In
Tank Consump. addition, Consump. only can also be registered since values can be entered from the keyboard.
(Tank Consumption) Dives for which the rate of surface air consumption can be calculated by AQUALAND GRAPH are
those of an average depth of 39 m or less and dive time of 30 seconds or more. Since the rate of
surface air consumption is calculated in 1 minute units, the dive time used for calculation is rounded
down for 0-29 seconds or rounded up for 30-59 seconds.

34
 Data is displayed that was registered in the <Diving Suit Initial definition> of <Fixed Items>.
Diving Suit When the button is clicked with the mouse, a list of registered suits is displayed, and a suit can
be selected from that list. In addition, a suit can also be registered by entering from the keyboard.

Data is displayed that was registered in the <Inner Wear Initial definition> of <Fixed Items>.

Inner Wear When the button is clicked with the mouse, a list of registered inners is displayed, and an inner
can be selected from that list. In addition, an inner can also be registered by entering from the
keyboard.
Weight Enter your weight as a numerical value.

When the button is clicked with the mouse, a list of tank materials is displayed that were
Tank (Material) registered in <Fixed Items>, and a tank material can be selected from that list. In addition, a tank
material can also be registered by entering from the keyboard.

When the button is clicked with the mouse, a list of equipment is displayed that were registered
Equipment in <Fixed Items>, and equipment can be selected from that list. In addition, equipment can also be
registered by entering from the keyboard.

Data is displayed that was registered in the <Initial definition> of <Customized Items>. When the
User customized button is clicked with the mouse, a list of registered items and their contents are displayed, and items
items can be selected from that list. In addition, items can also be registered by entering from the
keyboard.
This allows you to enter any comments you wish. Comments can be entered using up to 400 letters
Memo
or numbers.

Animated images and still pictures are registered in a log.

When the button is clicked with the mouse, added data is finalized and the program returns to the <Main
Window>.

In addition, when the or button is clicked with the mouse, the data to be edited can be moved
after finalizing the revised data.

Clicking on the button or the button in the upper right corner of the dialogue box cancels any changes
and returns the program to the <Main Window>.

Data that has been finalized by clicking the or button with the mouse before clicking the

button is not canceled.

35
8.1. Create New Log
A new log is created without transferring data from the watch. This is performed when you want to retain a log even though
there is no data to be transferred, such as when diving without wearing the watch. Since there is no data transferred from the
watch, graphs of logs created with this function cannot be displayed.

An empty <Create New Log> dialogue box is displayed either when the button of the <Main Window> is clicked with
the mouse or [Create New log (N)] is selected from the [Files (F)] menu.

Changes are canceled by either clicking the button or clicking the button in the upper right corner of the
dialogue box with the mouse, after which the program returns to the <Main Window>.

Since <Date> and <Repet. No.> are required items, data cannot be registered unless these items are entered.

Enter the year, month and day as numerical values.

Date
Clicking the button with the mouse displays a calendar dialogue box for entering the date.
Enter the number of times diving is to be repeated on that day as a numerical value. Numerical
Repet. No
values from 0 to 9 can be entered.

Although data can be entered in the same manner as Add Log Data, the following data can also be entered here.

36
 Ave. Depth Enter the average depth as a numerical value.

Max. Depth Enter the maximum depth as a numerical value.

Ave. w. temp Enter the average water temperature as a numerical value.

Min.w. Temp Enter the minimum water temperature as a numerical value.

S.I.Time Enter the surface interval time in hours, minutes and seconds (HH:MM:SS).

Time In Enter the dive starting time in hours, minutes and seconds (HH:MM:SS).

Time Out Enter the dive ending time in hours, minutes and seconds (HH:MM:SS).

Dive Time Enter the duration of the dive in hours, minutes and seconds (HH:MM:SS).

Data is registered by entering the required data and pressing the button.
When registration is completed, a dialogue box is displayed asking whether or not an additional new log is to be created.

The program returns to the <Main Window> if the button is clicked with the mouse.

If the button is clicked with the mouse, the program returns to the <Create New Log> dialogue box.
The data previously entered in the <Create New Log> dialogue box is displayed at this time.

8.2. Edit
The currently selected log is edited.

The <Edit> dialogue box of the log that is currently selected is displayed when the button of the <Main Window> is
clicked with the mouse or when [Edit (E)] is selected from the [Files (F)] menu.

Although the basic procedure is the same as that for Add Log Data, the portion of the data that has been transferred for a log
that has been created by transferring data from the watch cannot be edited.

8.3. Delete
Log data that you want to delete is selected from the Diving List after switching the <Main Window> to the Diving List.
The selected log data is deleted by selecting [Delete (D)] from the [Files (F)] menu.

37
8.4. Edit Album
Still pictures and animated images are registered.

When the button is clicked with the mouse, image registration is finalized and the program returns to the
<Main Window>. Registered images are displayed in the Album Display Area of the <Main Window> as thumbnails.

Registration is canceled by either clicking the button or clicking the button in the upper right corner of the
dialogue box with the mouse, after which the program returns to the <Main Window>.

Add a new image to a location selected by clicking with the mouse.

Delete an image selected by clicking with the mouse.

Capture an image and select an image for thumbnail display as desired from animated images selected
by clicking with the mouse.

38
8.4.1. Add Image
Select a location at which you want to add an image by clicking with the mouse. The image is added at the selected location.

When the button is clicked with the mouse, a dialogue box for selecting a file is displayed. Select the image
file you want to register.
Files of still pictures that can be registered are JPEG / BMP files.
Files of animated images that can be registered are AVI files that can be played back with your personal computer.
A dialogue box for changing the thumbnails is displayed when an animated image file has been added. (refer to section
“8.4.3. Change Thumbnails” for further details)

8.4.2. Delete Image

Select an image you want to delete by clicking with the mouse.

The selected image is deleted when the button is clicked with the mouse.

8.4.3. Change Thumbnails

Images of animated image files for thumbnail display can be designated by capturing an arbitrary image among the animated
images.
The displayed image is designated as a thumbnail image when the button is clicked with the mouse.

Thumbnails are left unchanged by either clicking the button or the button in the upper right corner of the
dialogue box.

Begins playback of an animated image.

Pauses an animated image during playback.

Click on and with the mouse to resume playback.

Returns to the beginning of an animated image.

39
8.4.4. Import Log
Log data is imported.

The <Select Folder> dialogue box is displayed when [Import Log (I)] is selected from the [Option (O)] menu of the <Main
Window>. (refer to section “6.1.6. Select Folder” for further details).

Both exported data and data from an older version can be imported.

* Data is loaded when a folder is designated in which exported data of AQUALAND GRAPH Ver. 2.0 or Ver. 2.1 has
been saved.
* Data is loaded when a folder is designated in which AQUALAND GRAPH Ver. 2.0 or Ver. 2.1 log data has been saved.
* Data is loaded when a folder is designated in which data of AQUALAND GRAPH for Windows Ver.1 has been saved.
Original data is not deleted.
* Data is loaded when a folder is designated in which DOS data has been saved.

8.4.5. Export Log

AQUALAND GRAPH data is exported.
The <Export Log> dialogue box is displayed when the diving data you want to export is selected from the <Diving List> of the

<Main Window>, and either the button is clicked with the mouse or [Export Log (E)] is selected from the [Option (O)]
menu.

Only a log is exported.

Log Only
The <Save As> dialogue box is displayed when the button is clicked with the mouse.

A log and diving data are exported.

Log and Diving
record The <Select Folder> dialogue box is displayed when the button is clicked with the
mouse. (refer to section “6.1.6. Select Folder” for further details).
All data including album data are exported.
Log, Diving record The <Select Folder> dialogue box is displayed when the button is clicked with the
and album record mouse.(refer to section “6.1.6. Select Folder” for further details).
Image files managed in the album are also copied to the designated file.

Files exported with "Log Only" cannot be imported with AQUALAND GRAPH. In order to import files with AQUALAND
GRAPH, export files with "Log and Diving record" or "Log, Diving record and album record".

40
 9. Diving List
Switch the display if the <Main Window> is in the Album Display Mode.

9.1. Sort
When any of the items displayed in the <Diving List> are clicked with the mouse, data is sorted using that item as the key.
The order of sorting is changed back and forth between ascending order and descending order each time the mouse is
clicked.

9.2. Select Log Item

The <Select Log Item> dialogue box is displayed when [Select Log Item (I)] is selected from the [Display (L)] menu of the
<Main Window>.

Items to be displayed in the <Diving List> can then be selected.

The items displayed in the list of items on the right side of the display are the items that are actually displayed.

Registration is finalized when the button is clicked with the mouse, after which the program returns to the
<Main Window>. Since finalized registration contents are stored in memory by AQUALAND GRAPH, it is not necessary to
register them each time it is started up.

Changes are canceled by either clicking the button or clicking the button in the upper right corner of the
dialogue box with the mouse, after which the program returns to the <Main Window>.

41
Addition of Displayed Items
When an item that you want to be displayed is selected from the list of items on the left side of the display and the

button is clicked with the mouse, the selected item moves to the list on the right side of the display.

Deletion of Displayed Items

When an item that you no longer want to be displayed is selected from the list of items on the right of the display and the

button is clicked with the mouse, the selected item moves to the list on the left side of the display.

Changing Position of Displayed Items

You can change the display position of an item by selecting the item for which you want to change the position from the list of

items on the right side of the display and clicking the or button with the mouse.

9.3. Search
A search is made of the <Diving List> to display only the data that matches a designated key.

The <Search> dialogue box is displayed when the button of the <Main Window> is clicked with the mouse or [Search

(S)] is selected from the [Display (L)] menu. When search conditions are specified and the button is clicked
with the mouse, a list of data is displayed that contains the matching letters.
However, all data containing letters that you want to search for that item is displayed. For example, in the case of entering the
letters "john" when searching for divers, all divers containing the letters "john" in their name will be displayed, such as
"Johnston", "Johnson", "Upjohn" and "John Smith".

42
The Search function cannot be used in the Search mode.
When Transfer or Create New Log is performed in the Search mode, selection is canceled and all logs are displayed.

In order to return from the search display to the normal display, either click the button of the <Main Window> with the
mouse, or select [Search (S)] of the [Display (L)] menu.

9.4. Print Log List

You can print out the diving list. Only those items indicated below are printed out.

* Date
* Repet. No. (Repeat No.)
* Location
* Dive Site
* Weather

Although printouts are generated based on A4-size paper, enlargement and other parameters can be changed by changing
the properties of the printer driver.
Refer to the printer user's manual for information on the procedure for setting up the printer driver.

43
 10. Display Graph
A graph is displayed of the diving data displayed in the <Log Display Area> of the <Main Window>. Data added with Create
New Log is not displayed in the graph.

The <Graph Window> is displayed when either the button of the <Main Window> is clicked with the mouse or [Graph
(G)] is selected from the [Display (L)] menu.

When diving list data is selected from the <Diving List> of the <Main Window> while the Graph Window is displayed, a graph
is displayed that corresponds to the selected log. In the case of selecting multiple sets of diving data, the graphs of a
maximum of 8 data sets can be displayed superimposed on each other.
The graph display does not change when more than 8 data sets have been selected. The graph cursor can be moved by
clicking the mouse on the graph cursor MOVE button. The data at the location of the cursor is displayed in the legend.

Sets the background display and other

graph settings.
Sets the display of the lines to be
displayed on the graph.
Prints out the graph as it appears on the
screen.
Displays the <Main Window> as the top
window.

Ends the <Graph Window>.

44
 Moves the graph cursor to the first data set.

Moves the graph cursor to the previous data

in 5 minute units.
Moves the graph cursor to the previous data
set.

Moves the graph cursor to the next data set.

Moves the graph cursor to the next data in 5

minute units.

Moves the graph cursor to the last data set.

10.1. Panel Settings

The <Panel Settings> dialogue box is displayed when the button is clicked with the mouse.

45
 Sets the color outside the graph.

Sets the color of the legend.

3 Dimensions Switches between 2D and 3D display.

Background

Solid Color Sets the background color of the display.

Gradation Set the starting color and ending color of the gradation. The background is then displayed with color gradation.

Designate a still picture file to be used for the display. That still picture is then displayed for the background.
Either JPEG or BMP files can be selected.

The size of the still picture is adjusted to fit within the graph.
Stretch
Display Image User original files cannot be adjusted.
Still pictures of user original files are displayed in rows if they are smaller than the
Tile
background area.
Center Still pictures of user original files are displayed in the center in their original size.

Grid (Lines)

On Sets whether grid lines are displayed or not displayed.

Sets the color of the grid lines.

Cursor (Lines)
Sets the color of the cursor lines.

10.2. Set Line Type

The <Set Line Type> dialogue box is displayed when the button is clicked with the mouse.
Set the type of line by selecting a line number. Both line color and line width can be changed.

In addition, a similar dialogue box for changing the line type is displayed by clicking on the legend actually displayed in the
Graph Display Area. Line numbers cannot be changed in this case.

46
10.3. Print Graph
The graph is printed out as it appears on the screen when the button is clicked with the mouse.
Although printouts are generated based on A4-size paper, enlargement and other parameters can be changed by changing
the properties of the printer driver. Refer to the printer user's manual for information on the procedure for setting up the
printer driver.

47
 11. Print Log
Data is printed out that has been selected in the <Diving List> of the <Main Window>.

The <Print> dialogue box is displayed when the button of the <Main Window> is clicked with the mouse or [Print (P)]
is selected from the [Files (F)] menu. Since a choice of printing patterns is displayed, select the desired pattern by clicking
with the mouse.

Log When checked by clicking with the mouse, patterns are displayed that are used to print out a Log.

Graph When checked by clicking with the mouse, patterns are displayed that are used to print out a graph.

Album When checked by clicking with the mouse, patterns are displayed that are used to print out an album.

11.1. Print

A dialogue box for printing is displayed when the button is clicked with the mouse.
Although printouts are generated based on A4-size paper, enlargement and other parameters can be changed by changing
the properties of the printer driver. Refer to the printer user's manual for information on the procedure for setting up the
printer driver.

48
11.2. Print Preview

A preview of the printout is displayed when the button is clicked with the mouse.

The scale of the preview display can be changed by clicking on the or button with the
mouse. The scale can be changed from 40% to 100% in 10% units.

49
 12. Create HTML Document
An HTML document is generated from data selected in the <Diving List> of the <Main Window>.

The <Create HTML Document> dialogue box is displayed when the button of the <Main Window> is clicked with the
mouse or [Create HTML Document (H)] is selected from the [Files (F)] menu. Since icons of HTML document patterns are
displayed, select the desired pattern by clicking with the mouse.

Enter the title of the web site. Titles can be entered using up to 100 letters or numbers.
When only one data set has been selected from the diving list, date (day), repet. no. and location are
Title
displayed.
When multiple data sets have been selected, "DIVING LOG" is displayed.

Log When checked by clicking with the mouse, patterns are displayed that are used to output a log.

Graph When checked by clicking with the mouse, patterns are displayed that are used to output a graph.

Album When checked by clicking with the mouse, patterns are displayed that are used to output an album.

Background You can set the background of the web site.

Saves an HTML document for the selected pattern.

Starts up the web browser installed in your personal computer.

The web browser that is started up is the web browser that correlates with the HTML document based on
file correlation.

50
12.1. Set Background
A background can be set for a web site.

None A background is not set.

A dialogue box is displayed for selecting the background color. The selected color becomes
Color ...
the background color.
A dialogue box is displayed for selecting a still picture file. The selected still picture becomes
Image ...
the background. Either JPEG or BMP files can be selected.

12.2. Save HTML File

The <Save As> dialogue box is displayed.
Select a folder to which the file is to be saved, and designate a name for the HTML file. An HTML document is created in the
selected folder and related image files are copied to that folder.
Image file names are assigned automatically so as not to be duplicated within a folder.

51
 13. Trip Summary
Multiple sets of log data can be managed collectively in the form of trip summaries.
Log data can only be registered in a single trip summary.

13.1. Register Trip Summary

Trip summaries can be registered by following the procedure described below.

1. Switch the <Main Window> to the Diving List Display Mode.

2. Select the data from the diving list that you want to register in the trip summary.

3. The <Trip Summaries> dialogue box is displayed when the button is clicked with the mouse or [Trip Summary
(T)] is selected from the [Files (F)] menu.

4. The selected trip summary is added when an existing trip summary is selected and the button is clicked
with the mouse.
A new trip summary is created when the button is clicked with the mouse.

In the case both registered data and unregistered data have been selected for a trip summary in the diving list, unregistered
data is added to the trip summary of the registered data.

52
Create New Trip Summary

Title Enter a title to be displayed for the list of trip summaries. Titles can be entered using up to 40 letters or numbers.

Date Enter the year, month and day as numerical values. Clicking the button with the mouse displays a calendar dialogue
box for entering the date.
Data is displayed that was registered in the <Initial definition> of <Customize>. A list of registered items and their
Trip Summary
Items contents is displayed when the button is clicked with the mouse. You can then select the desired item from that list.
In addition, items can also be registered by entering from the keyboard.

Memo This allows you to enter any comments you wish. Comments can be entered using up to 400 letters or numbers.

Animated images and still pictures are registered in a log.

When the button is clicked with the mouse, added data is finalized and the <Trip Summary> dialogue box is
displayed.
Clicking on the button or the button in the upper right corner of the dialogue box cancels any changes
and returns the program to the <Trip Summaries> dialogue box.

53
13.2. Customize
Trip summary items and their contents to be saved in a trip summary are registered.

Registration is finalized when the is clicked with the mouse, after which the program returns to the <Trip
Summary> dialogue box. Since finalized registration contents are stored in memory by AQUALAND GRAPH, it is not
necessary to register them each time it is started up.

Changes are canceled by either clicking the button or clicking the button in the upper right corner of the
dialogue box with the mouse, after which the program returns to the <Trip Summary>dialogue box.

Data is added or changed in the <Add> or <Modify> dialogue box.

When data is entered and the button is clicked with the mouse, the program returns to the <Customize>
dialogue box, and edited data is shown in the list.

54
Items
Items can be entered using up to 20 letters or numbers. A maximum of 100 items can be registered.

Displays the <Add> dialogue box and adds new items. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes the names of selected items. A check for duplicated data
is not performed. Information relating to the contents is retained even if the name of an item is changed.

Deletes a selected item. The contents registered for that item are also deleted.

Moves the display position of a selected item up by one.

Moves the display position of a selected item down by one.

Contents
Contents can be entered using up to 20 letters or numbers. A maximum of 100 contents can be registered.

Displays the <Add> dialogue box and adds contents. A check for duplicated data is not performed.

Displays the <Modify> dialogue box and changes the selected contents. A check for duplicated data is not
performed.

Deletes selected contents.

Moves selected contents to a different item.

Moves the display position of selected contents up by one.

Moves the display position of a selected contents down by one.

13.3 Trip Summary Display

This is the main window for trip summaries.
Trip summaries are displayed with the following procedure in the case a log has already been registered for a trip summary.

is displayed on the left end of the <Diving List> for those logs that are registered in a trip summary.

1. Switch the <Main Window> to the Diving List Display Mode.

2. Select registered trip summary data from the diving list.

3. The <Trip Summary> dialogue box is displayed when either the is clicked with the mouse or [Trip Summary (T)]
is selected from the [Files (F)] menu.

55
13.4. Edit Trip Summary

Edits the trip summary currently displayed.

Edit by following the same procedure as that for Create New Trip Summary.

Registers items written into a trip summary.

Deletes from the diving listof the trip summary the log registered in the trip summary.
Information registered for AQUALAND GRAPH is not deleted.

Selects items you want to display in the diving list.

Displays the list of registered trip summaries..

When a trip summary is selected from this list, the designated trip summary is displayed.

Album Display Area

When an album image is clicked with the mouse, a dialogue box is displayed in the original image size in the case of still
pictures.
In the case of animated images, the application correlated with the AVI file is started up and that animated image can be
played back.

56
13.5. Delete Log
A log registered in a trip summary is deleted from the diving list of that trip summary.

The log you want to delete is selected from the diving list of the trip summary. When the button is clicked
with the mouse, the selected log is deleted from the diving list.

Information registered for AQUALAND GRAPH is not deleted.

13.6. List of Trip Summaries

A list of registered trip summaries is displayed.

Select the trip summary you want to display from the list and click the button with the
mouse. The selected Trip Summary is displayed.

Select the trip summary you want to display from the list and click the button with the
mouse.
The selected trip summary is deleted. Logs registered for that trip summary are not deleted.

57
 14. Limiting Values
The following lists the limiting values for data entered with AQUALAND GRAPH.

14.1. No.of Registrations

Item Max.registered no.

Log 9999

Location 1000

Dive site 100

D. Service 100

Diver 1000

Weather 100

Dive style 100

Water Body 100

Water cond. 100

Diving Suit 100

Inner Wear 100

Tank (material) 100

Equipment 100

User customized items 1000

User customized item contents 1000

Album (per log / trip summary) 50

Trip summary 99

Trip summary items 100

Trip summary contents 100

58
14.2. No. of Entered Characters
Item Max.no.of characters

Weight 10 letters or numbers

Capacity (Tank) 10 letters or numbers

Pressure 10 letters or numbers

Air consum. 10 letters or numbers

Location 20 letters or numbers

Dive site 20 letters or numbers

D. Service 20 letters or numbers

Diver 20 letters or numbers

Dive master 20 letters or numbers

Buddy 20 letters or numbers

Weather 12 letters or numbers

Dive style 10 letters or numbers

Water Body 10 letters or numbers

Water cond. 10 letters or numbers

Diving Suit 20 letters or numbers

Inner Wear 20 letters or numbers

Tank (material) 10 letters or numbers

Equipment 10 letters or numbers

User customized 12 letters or numbers
items
User customized 20 letters or numbers
item contents
Memo 400 letters or numbers

Album comment 20 letters or numbers

HTML document title 100 letters or numbers

Trip summary title 40 letters or numbers

Trip summary items 20 letters or numbers

Trip summary 20 letters or numbers
contents
Trip summary memo 400 letters or numbers

Note: All characters may not be displayed depending on their size, even if the number of characters entered is less than the maximum number
of characters allowed.

59
14.3. Entered Values
Item Max.no.of
characters
Repet. No. 2 numbers

Max. depth 4 numbers

Ave. depth 4 numbers

Safety stop 4 numbers
depth
Safety stop time 3 numbers

Temp. 4 numbers

Ave. w. temp 4 numbers

Min. w. temp 4 numbers

Visibility V. 4 numbers

Visibility H. 4 numbers

Tank Capacity 4 numbers

Pres. In 4 numbers

Pres. Out 4 numbers

Consump. 4 numbers

Weight 4 numbers

60
 15. Communication Unit Specifications

Type CMUT-1 CMUT-03

Power supply Supplied by the RS-232C signal line

Power consumption 2mA

Temperature : +5°C to +40°C (41°F to 104°F)

Operating conditions
Humidity : 20% to 80% (with no condensation)

W: 7.1cm W: 10.8cm
Dimensions D : 11.1cm D : 7.1cm
H : 3.1cm (incl. connector) H : 8.6cm (incl. stand)

Weight 105g 270g (incl. stand)

61