Scribd
Upload
144 views1 page

Prefabricated Vertical Drain Test Report

This report summarizes test results for two rolls of prefabricated vertical drain material. Testing was conducted according to various ASTM standards and found the material had a discharge capacity of 90 cm3/sec, widths of 100-101mm, thicknesses of 4.10-4.12mm, and met other specifications for tensile strength, filter properties, and permeability. The conclusion was that the material meets customer and production specifications based on the test results.

Uploaded by

trichandra maharjan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
144 views1 page

Prefabricated Vertical Drain Test Report

This report summarizes test results for two rolls of prefabricated vertical drain material. Testing was conducted according to various ASTM standards and found the material had a discharge capacity of 90 cm3/sec, widths of 100-101mm, thicknesses of 4.10-4.12mm, and met other specifications for tensile strength, filter properties, and permeability. The conclusion was that the material meets customer and production specifications based on the test results.

Uploaded by

trichandra maharjan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Prefabricated Vertical Drain Test Report

1 Customer Name :- M/s Raligare Construction Pvt.Ltd. ,Lalitpur, Nepal


2 Product Code :- TechDrain - TD3520U
3 Inv.no./Date :- DGST2223/1414/29.03.2023

Observed Value
Properties UOM Test Method
Roll No. 23-04-02-759 Roll No. 23-04-02-2527

A Overall Drain

Discharge Capacity
1
Straight 200 Kpa, i = 1.0) cm3/sec ASTM D 4716 90

2 Width mm - 100 101

3 Thickness mm ASTM D 5199 4.10 4.12

4 Tensile Strength kN ASTM D 4595 1.70 1.68

B Filter

1 Wide width Tensile Strength MD kN/m EN ISO 10319 3.50 3.48

2 Grab Strength MD N ASTM D 4632 331 338

3 Trapezoidal Tear strength MD N ASTM D 4533 110 108

4 Puncture Strength N ASTM D 4833 106 102

5 Bursting Strength KPA ASTM D 3786 650 680

6 Apparent Opening Size MM ASTM D 4751 <0.075

7 Permeability m/s ASTM D 4491 20X 10-3

Conclusion: - The material is released based on the Customer Specification and or Production Specification. The Test Certificate of the material certifies
the Test Results of the above tests only.

Jagdish Joshi
(Authorized sign.)

END OF TEST REPORT (Page 1 of 1)


Sample Condition And Tested at Temp of 21±2°C & 65±5% RH, Sample not drawn by laboratory
The Test Report shall not be reproduced except in full; without the written approval of the laboratory.

Works: Survey No. 147/2 & 3,147/1&4, Opp. Dabhel Talab, Village- Dabhel. Daman Pin -396210 (U.T.)
Ph : 0260-2242227/2242228 Fax :0260-2242226 E-mail : nonwoven.qualitylab@ techfabindia.com
H.O. : 712,Embassy Center, Nariman Point , Mumbai 400021. India.Tel. : 91-22-22876224/6225, Fax: 9-22-22876218, E-mail : [email protected]

You might also like