Scribd
Upload
28 views3 pages

Expt5 - Keyboard Programme

This document describes a program that scans a 4x4 keypad and displays the pressed key on a 7-segment display. It initializes ports and loads all 1s into P1 to enable row lines. It then checks each column line using JB instructions to detect pressed keys. When a key is pressed, it loads the corresponding digit from a lookup table into P2 to display on the 7-segment display.

Uploaded by

Akhil Nameirakpam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views3 pages

Expt5 - Keyboard Programme

This document describes a program that scans a 4x4 keypad and displays the pressed key on a 7-segment display. It initializes ports and loads all 1s into P1 to enable row lines. It then checks each column line using JB instructions to detect pressed keys. When a key is pressed, it loads the corresponding digit from a lookup table into P2 to display on the 7-segment display.

Uploaded by

Akhil Nameirakpam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

ORG 00H

MOV DPTR,#LUT // moves starting address of LUT to DPTR

MOV A,#11111111B // loads A with all 1's

MOV P2,#00000000B // initializes P0 as output port

BACK:MOV P1,#11111111B // loads P1 with all 1's

CLR P1.0 // makes row 1 low

JB P1.4,NEXT1 // checks whether column 1 is low and jumps to NEXT1 if not low

MOV A,#00D // loads a with 0D if column is low (that means key 1 is pressed)

ACALL DISPLAY // calls DISPLAY subroutine

NEXT1:JB P1.5,NEXT2 // checks whether column 2 is low and so on...

MOV A,#1D

ACALL DISPLAY

NEXT2:JB P1.6,NEXT3

MOV A,#2D

ACALL DISPLAY

NEXT3:JB P1.7,NEXT4

MOV A,#3D

ACALL DISPLAY

NEXT4:SETB P1.0

CLR P1.1

JB P1.4,NEXT5

MOV A,#4D

ACALL DISPLAY

NEXT5:JB P1.5,NEXT6

MOV A,#5D

ACALL DISPLAY

NEXT6:JB P1.6,NEXT7

MOV A,#6D

ACALL DISPLAY
NEXT7:JB P1.7,NEXT8

MOV A,#7D

ACALL DISPLAY

NEXT8:SETB P1.1

CLR P1.2

JB P1.4,NEXT9

MOV A,#8D

ACALL DISPLAY

NEXT9:JB P1.5,NEXT10

MOV A,#9D

ACALL DISPLAY

NEXT10:JB P1.6,NEXT11

MOV A,#10D

ACALL DISPLAY

NEXT11:JB P1.7,NEXT12

MOV A,#11D

ACALL DISPLAY

NEXT12:SETB P1.2

CLR P1.3

JB P1.4,NEXT13

MOV A,#12D

ACALL DISPLAY

NEXT13:JB P1.5,NEXT14

MOV A,#13D

ACALL DISPLAY

NEXT14:JB P1.6,NEXT15

MOV A,#14D

ACALL DISPLAY

NEXT15:JB P1.7,BACK
MOV A,#15D

ACALL DISPLAY

LJMP BACK

DISPLAY:MOVC A,@A+DPTR // gets digit drive pattern for the current key from LUT

MOV P2,A // puts corresponding digit drive pattern into P0

RET

LUT: DB 00000110B //1 Look up table starts here

DB 01011011B //2

DB 01001111B //3

DB 01110111B //a

DB 01100110B

DB 01101101B

DB 01111101B

DB 01111100B

DB 00000111B

DB 01111111B

DB 01101111B

DB 00111001B

DB 01111001B

DB 00111111B

DB 01110001B

DB 01011110B

END

You might also like