Scribd Logo
Upload

Welcome to Scribd!

  • 39 views

    Gujarat Technological University Instrumentation & Control Engineering

    Uploaded by

    gecg IC
    This document outlines an Instrumentation and Control Engineering course offered at Gujarat Technological University. The course is a 4th semester core course that introduces students to various electrical and electronic measurement instruments and systems. Topics covered include analog and digital meters, oscilloscopes, measurement of resistance, capacitance, inductance and other electrical quantities. Students will learn to operate instruments, find faults, design meters, and apply measurement concepts. The course aims to prepare students to perform experiments and design instrumentation systems through 10 listed experiments and a design project.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gujarat Technological University Instrumentation & Control Engineering

    Uploaded by

    gecg IC
    39 views3 pages
    This document outlines an Instrumentation and Control Engineering course offered at Gujarat Technological University. The course is a 4th semester core course that introduces students to various electrical and electronic measurement instruments and systems. Topics covered include analog and digital meters, oscilloscopes, measurement of resistance, capacitance, inductance and other electrical quantities. Students will learn to operate instruments, find faults, design meters, and apply measurement concepts. The course aims to prepare students to perform experiments and design instrumentation systems through 10 listed experiments and a design project.

    Original Title

    2141704

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines an Instrumentation and Control Engineering course offered at Gujarat Technological University. The course is a 4th semester core course that introduces students to various electrical and electronic measurement instruments and systems. Topics covered include analog and digital meters, oscilloscopes, measurement of resistance, capacitance, inductance and other electrical quantities. Students will learn to operate instruments, find faults, design meters, and apply measurement concepts. The course aims to prepare students to perform experiments and design instrumentation systems through 10 listed experiments and a design project.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    39 views3 pages

    Gujarat Technological University Instrumentation & Control Engineering

    Uploaded by

    gecg IC
    This document outlines an Instrumentation and Control Engineering course offered at Gujarat Technological University. The course is a 4th semester core course that introduces students to various electrical and electronic measurement instruments and systems. Topics covered include analog and digital meters, oscilloscopes, measurement of resistance, capacitance, inductance and other electrical quantities. Students will learn to operate instruments, find faults, design meters, and apply measurement concepts. The course aims to prepare students to perform experiments and design instrumentation systems through 10 listed experiments and a design project.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    GUJARAT TECHNOLOGICAL UNIVERSITY

    INSTRUMENTATION & CONTROL ENGINEERING (17)


    MEASUREMENT & INSTRUMENTS
    SUBJECT CODE: 2141704
    B.E. 4th Semester

    Type of course: Core

    Prerequisite: Basic Electrical Engineering, physics

    Rationale: To prepare students for experiments and design with various electrical, electronic
    measurements and instrumentation systems.

    Teaching and Examination Scheme:

    Teaching Scheme Credits Examination Marks Total


    L T P C Theory Marks Practical Marks Marks
    ESE PA (M) PA (V) PA
    (E) PA ALA ESE OEP (I)
    4 0 2 6 70 20 10 20 10 20 150
    L- Lectures; T- Tutorial/Teacher Guided Student Activity; P- Practical; C- Credit; ESE- End Semester
    Examination; PA- Progressive Assessment

    Content:

    Sr. No. Content Total % Weightage


    Hrs
    1 Introduction: Types of instruments: Indicating, recording, integrating, 2 4
    etc.
    2 Analog DC and AC meters: Electromechanically meter movements, 6 10
    PMMC, Analog DC ammeters, Analog DC voltmeters, Analog AC
    ammeters and Voltmeters, Analog multimeters, Special purpose analog
    meters, Use of basic meters, meter errors, problems. Extending the range
    of meters, Loading effects and their elimination, true rms voltmeters.
    3 Digital Meters: DVM and Digital multimeter, vector voltmeters, 7 6 10
    segment and LCD display. Analog to Digital Converters and Digital to
    Analog Converters,
    4 Oscilloscope: Oscilloscope subsystem, Principle of Operation, Cathode 8 15
    Ray Tube ,Display subsystem, Vertical deflection subsystem, Dual
    trace/Dual beam feature,
    Horizontal deflection subsystems, oscilloscope probes, oscilloscope
    controls, Front panel of an oscilloscope, Lissajous patterns
    oscilloscope photography, Digital storage oscilloscopes (DSO), Power
    scope. Attenuation probes, problems
    5 Time & Frequency Measurement: Time Measurements, Frequency 3 10
    measurement, Harmonic Analysis and spectrum analyzers, Frequency
    Mixer problems.
    6 Power & Energy Measurement: Power in AC-DC circuits, single- 4 10
    phase power measurements, Poly-phase power and
    measurements, Electrical energy measurements, Power measurements
    problems
    7 Measurement of Resistance & Bridges : Resistance and resistor, 8 20
    resistor type, measurement of resistance, Wheatstone Bridge, Making
    balanced Wheatstone Bridge measurement, Low value
    resistance measurement (Kelvin Double Bridge), problems.
    Measurement of Capacitance, Inductance, and Impedance: Hays
    Bridge, Schering Bridge, Maxwell bridge, Anderson Bridge, Q-factor,
    Capacitance and capacitors, capacitor circuit models
    and losses, capacitor types, color coding of capacitor, Inductor and
    Inductance, Inductor structure, Transformers,
    Impedance, Capacitance and Inductance, Capacitance and Inductance
    measurement, complete impedance measurement, frequency
    measurement, problems.
    8 Current and Potential transformers, testing, and applications. 3 5
    9 A.C. Signal Sources: Sweep Frequency generators, Pulse generators, 3 6
    Function generators, Oscillators
    Interference Signals and Their Elimination: Capacitance interference,
    inductive interference and shielding,
    electromagnetic interference and shielding, conductive coupling
    interference, ground loop interference and input
    guarding to reduce it internal noise.
    10 Measurement of Power factor and frequency with analog and digital 5 10
    meters. Magnetometer. Miscellaneous measurements: speed, velocity.

    Suggested Specification table with Marks (Theory):

    Distribution of Theory Marks


    R Level U Level A Level N Level E Level
    28 28 7 7 -
    Legends: R: Remembrance; U: Understanding; A: Application, N: Analyze and E: Evaluate
    and above Levels (Revised Bloom’s Taxonomy)

    Note: This specification table shall be treated as a general guideline for students and teachers. The
    actual distribution of marks in the question paper may vary slightly from above table

    Reference Books:

    1. Wolf & Smith, Student reference manual for Electron ic and Instrumentation measurement,
    PHI Publication.
    2. E.W. Golding and F.C. Widdis, Electrical measurements and measuring instruments, Pitman
    Publishing.
    3. Bemard Oliver and John Cage, Electronic Measurement s and Instrumentation, Tata Mcgraw
    Hill.
    4. William d.Cooper, Albert d. Helfrick, Electronic Instrumen tation and measurement
    techniques, Prentice – Hall.
    5. A.K.Sawhney, A Course in Electrical and Electronic Measurements and Instrumentation,
    Dhanpatrai Publication.
    6. H.S. Kalsi, Electronic instrumentation.
    7. Kim Fowler, Electronic Instrument Design, OUP, USA, 1996.

    Course Outcome:

    After learning the course the students should be able to:


    1. Operate modern electrical and electronic instruments like DSO, Digital Multimeter,
    and other digital and analog instruments.
    2. Find faults and test various instruments and justify their use in systems.
    3. Carry out Engineering design of various meters or select instruments for various
    applications.

    List of Experiments: (Outlines)

    1. Find the unknown resistance with Whistone bridge.


    2. Find unknown capacitance with a.c. bridge.
    3. Measure power in single/3-phase circuit.
    4. Extend the range of given ammeter.
    5. Perform experiment on energy meter and learn to take readings.
    6. Operation of CRO, DSO for voltage, current and frequency measurement, Lissajous patterns,
    phase angle measurements.
    7. Find unknown inductance with given a.c. bridge.
    8. Find low resistance with Kelvin double bridge.
    9. Understanding functioning of modern digital multimeters and their computer interface.

    Design based Problems (DP)/Open Ended Problem:


    Design Multi range voltmeter and ammeter by extending ranges of given meters.

    Major Equipment:

    CRO, DSO, AC/DC bridges, Power and Energy meters, load trolley, etc.

    List of Open Source Software/learning website:

    http://nptel.iitk.ac.in/courses/Elec_Engg/IIT%20Bombay/Electrical%20and%20Electronic%20Measur
    ements.htm
    http://en.wikipedia.org/wiki/Electricity_meter
    http://en.wikipedia.org/wiki/Electric_power

    ACTIVE LEARNING ASSIGNMENTS: Preparation of power-point slides, which include videos,


    animations, pictures, graphics for better understanding theory and practical work – The faculty will
    allocate chapters/ parts of chapters to groups of students so that the entire syllabus to be covered. The
    power-point slides should be put up on the web-site of the College/ Institute, along with the names of
    the students of the group, the name of the faculty, Department and College on the first slide. The best
    three works should submit to GTU.

    You might also like