Scribd Logo
Upload

Welcome to Scribd!

  • 39 views

    Apx 500

    Uploaded by

    keisinho
    1) The document provides specifications and instructions for an electric acoustic guitar system, including details about its preamplifier controls, output, power supply, and tuner. 2) Setup instructions are given for replacing the guitar's battery and using its 3-band equalizer and built-in chromatic tuner. 3) Safety precautions are provided, such as turning down the volume before plugging in and removing the battery if not using the guitar for an extended period.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Apx 500

    Uploaded by

    keisinho
    39 views1 page
    1) The document provides specifications and instructions for an electric acoustic guitar system, including details about its preamplifier controls, output, power supply, and tuner. 2) Setup instructions are given for replacing the guitar's battery and using its 3-band equalizer and built-in chromatic tuner. 3) Safety precautions are provided, such as turning down the volume before plugging in and removing the battery if not using the guitar for an extended period.

    Original Title

    apx500

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document provides specifications and instructions for an electric acoustic guitar system, including details about its preamplifier controls, output, power supply, and tuner. 2) Setup instructions are given for replacing the guitar's battery and using its 3-band equalizer and built-in chromatic tuner. 3) Safety precautions are provided, such as turning down the volume before plugging in and removing the battery if not using the guitar for an extended period.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    39 views1 page

    Apx 500

    Uploaded by

    keisinho
    1) The document provides specifications and instructions for an electric acoustic guitar system, including details about its preamplifier controls, output, power supply, and tuner. 2) Setup instructions are given for replacing the guitar's battery and using its 3-band equalizer and built-in chromatic tuner. 3) Safety precautions are provided, such as turning down the volume before plugging in and removing the battery if not using the guitar for an extended period.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    SPECIFICATIONS

    System SYSTEM-55TA: Monaural 1 way


    ELECTRIC Pickup
    Pre-amplifier Controls
    Bar Sensor (Piezo type)
    VOL., 3 Band (HIGH, MID, LOW) EQ
    ACOUSTIC GUITAR control, AMF control
    Output jack Combination end pin/power switch
    Owner’s Manual Output impedance 1 kΩ
    Power supply 9V DC, S-006P (6F22) dry cell battery
    Thank you for choosing a Yamaha electric-acoustic guitar. Battery life Approx. 150 hours (without tuner)
    In order to make the most of the advanced features and Approx. 140 hours (with the preamp
    performance provided by your guitar, please read this switched ON and the tuner used 1 minute
    manual carefully before using the instrument. every 1 hour)
    Tuner Tuning System: Chromatic type (12
    semitones), A4=440Hz
    PRECAUTIONS Auto OFF Function: Tuner automatically
    switches OFF after 1 minute.
    The output jack is an EIAJ-standard 1/4" phone jack. Be sure to use
    Input: Built in pickup (bridge bar sensor)
    an appropriate connection cable.
    Accuracy: +/– 3 cents
    The built-in preamplifier is automatically turned on when a plug is Accessories • Hexagonal wrench for neck adjustment x1
    inserted into the output jack. When not using the instrument, or when • S-006P (6F22) dry cell battery x1
    playing it without amplification, be sure to remove the plug from the
    output jack so that the preamplifier power is turned off.
    Always set the VOLUME control to “0” when plugging in or THE CONTROLS
    unplugging the connection cable.
    q VOL. (Volume) Control w q e
    The battery check indicator (BATT.) will light briefly when a plug is
    inserted or removed from the output jack. This is normal and does not Adjusts the overall output volume level.
    indicate a malfunction. * Make sure that the VOL. is turned to “0”
    before connecting or disconnecting.
    Be sure to remove the battery if the instrument will not be used for an
    extended period of time in order to prevent possible damage due to w BATT. (Battery Check) Indicator
    battery leakage. This indicator will light when the battery
    needs to be replaced.
    Please replace the battery as soon as
    NOMENCLATURE possible when the BATT. indicator lights.

    e 3 Band Equalizer y t r
    LOW : Boosts or cuts the level of the low frequencies.
    Control Section Battery Holder
    MID : Boosts or cuts the level of the middle frequencies.
    The AMF control r adjusts the center frequency of the band
    affected by this control.
    HIGH : Boosts or cuts the level of the high frequencies.
    r AMF Control
    Sets the center frequency of the band of frequencies affected by the MID
    equalizer control. The range is from 80 Hz to 10 kHz.
    * This control has no effect when the MID equalizer control is set to its center
    (“0”) position.
    Bar Sensor t Tuner Switch
    Switches the tuner ON/OFF.
    Output Jack (with power switch function)
    y Tuner Display
    Displays tuner information.

    BATTERY REPLACEMENT
    Be sure to replace the battery as soon as possible when the battery check USING THE TUNER
    indicator lights in order to avoid reduced sound quality.
    * Be sure to remove the battery if the instrument will not be used for an extended The guitar is equipped with an A4=440Hz standard pitch tuner. The
    period of time in order to prevent possible damage due to battery leakage. tuner’s circuitry is independent from the guitar’s output circuit so
    switching the tuner ON/OFF will have no affect on sound output.
    q Press the catch on the battery holder in the direction indicated by the arrow
    in the illustration in order to unlock it. q Press the TUNER switch. While the tuner activates the and lamps
    w Slide out the battery case. light alternately.
    e Remove the old battery from the battery case, and insert the new battery w Tune the guitar string until the note name of the desired pitch appears in
    making sure that the (+) and (–) terminals of the battery are positioned as the tuner’s display.
    shown in the illustration. Use only a DC9V, S-006P (6F22) or equivalent The lamp indicates the pitch is low.
    battery. The lamp indicates the pitch is high.
    r Slide the battery case back into the battery holder and press firmly so The pitch indicator ( ) flashes slower as the string’s pitch nears the
    that the battery case locks into place. note shown in the display.
    e The string is in tune when the and lamps both light.
    q w, r e
    Battery case DC9V S-006P * The tuner automatically switches OFF when not used for more than one minute
    (6F22) (energy saver function). Press the TUNER switch again to switch it back on.
    w EN

    OP
    EN
    OP
    * It may take a few seconds before the tuner can detect pitches after being switched
    ON.
    * The note name and displays may have difficulty keeping up with irregular
    r
    pitch changes. Gradually change the pitch and check when tuning.
    Catch * The tuner may have difficulty detecting notes rich with overtones or with very
    short sustain.

    Downloaded from www.Manualslib.com manuals search engine

    You might also like