Untitled

Shandong Dolang Technology & Equipment Co., Ltd.
China
Dolang follows the technical standards of the WorldSkills

Competition as its product development standards. Dolang
Education Group has paid close attention to the dynamic
and related activities of the WorldSkills Competition since
2007. Deeply researching and tracking the development
direction, organization and implementation characteristics,
technology research and development direction,
proposition style, and the scoring rules of the WorldSkills
International, Dolang takes the Worldskills competition
technical standards as the technical concept for Dolang
development.
Company Profile
Shandong Dolang Technology Equipment Co.,Ltd, founded in year 1998, is a state-level high-tech
enterprise for designing and manufacturing of didactic equipments and software. The main office is
located in Jinan with more than 200 staff. The factory covers an area of 40,000 square meters, among
which 30,000 square meters is for the production workshop. The office area is about 20,000 square
meters. Our corporate mission is to make a technical contribution to the cause of education.
Shandong Dolang Technology Equipment Co., Ltd. is member of Worlddidac Association. Dolang
cooperates with the training and teaching experts from Germany, taking the vocational education products
manufacturing as the core and providing the leading technical services. Dolang products have passed
the ISO9001, ISO14001, ISO18001, and European CE certification, which are exported to Thailand,
Malaysia, Indonesia, India, Tunisia, Russia, Brazil, Colombia, Mexico and other countries and areas.
Dolang has built the global marketing network with distributors in 45 countries and areas. Dolang wins
the No. 1 export brand of didactic equipments, and it has been a worldwide recognized brand in this field.
In the past 20 years, Dolang from the { "manufacturing' , "manufacturing+" , "manufacturing+service" to "
service+" } gradually. With the distinctive manufacturing genes, vocational training products manufacturing
as the core, plus the leading technical services, Dolang passed the "manufacturing+" to "service+" stage.
On this basis, Dolang innovated on the past of service model, intergrated solution of vocational education
as the core, breakththrough in the modern/new apprenticeship, Chinese and foreign cooperation in
running schools, mixed owership school etc.
Company Activities
04
■ In 2012, Dolang co-organized Shandong Province Qualifying Trial of the Electrical and Electronic,
New Energy Training series
Fourth National Technical College Skills Competition.
■ In 2012, Dolang was awarded as the science popularization education
base of Shandong province.
■ In 2013, Dolang was absorbed as a member by the Education Equipment
14
Industry Association of Shandong province.
Mechanical Design,
■ In 2013, Dolang was awarded as the "innovative enterprise of Jinan city".
CNC Machine Training series
■ In 2013, Dolang was awarded the "AAA corporate reputation certificate".
■ In 2013, Dolang was awarded as the enterprise accredited for fulfilling
contract and valuing credit.
■ In 2013, Dolang was approved the certificate of "Shandong High-Tech
48
Enterprise".
■ In 2013, Dolang successfully passed "Double Soft Enterprise" certification.
Building Automation,
■ In 2013, Dolang became a Worlddidac member directly under UNESCO. Electrical Engineering and
■ In 2014, Dolang became the school-enterprise cooperation governing unit Automation Training System
51
of Shandong Labor Vocational and Technical College.
■ In 2014, Dolang was awarded as the academician workstation of Jinan City.
■ In 2014, Dolang was recognized as a "one company, one technology"
innovation enterprise in Shandong province.
■ In 2015, Dolang successfully passed SGS international certification system. Mechatronics, Industrial
■ In 2015, Dolang was designated as the "Practical Teaching Base" by Jinan Robot Training series
university in shandong province.
■ In 2015, Dolang was designated as the "Employment Internship Base" by
Jinan University in Shandong province. 80
■ In 2015, Dolang was designated as a "Youth Employment and
Entrepreneurship Base" by Jinan University in Shandong province.
■ In 2015, Dolang was designated as "University Students Social Practice
Base" byJinan University in Shandong province.
■ In 2015, Dolang became a member of China Automotive Warranty Equipment Association.
■ In 2016, Dolang co-hosted China Qualifying Trials of the 44th World Skills Competition .
■ In 2016, Dolang co-hosted the first National Industrial Robot Technology Application
Skills Competition.
■ In 2017, Dolang co-sponsored China International Skills Competition.
■ In 2017, Dolang co-hosted the second National Industrial Robot Technology
Application Skills Competition.
7
CE Certificate
ISO14001 ISO9001
OHSAS18001 SGS
8
Gold Member of Worlddidac Association
International College-Enterprise Corporation

Organization Representative Office in Greater China
9
David Hoey, CEO of Worldskills Competition Visited Dolang Exhibition Stand
2015 International University-Enterprise Cooperation Docking Dialogue

10
Dolang Sponsored Mobile Robotics Project of 2017 China International Skills Competition.
2016 China Skills Competition National Selection

Competition of the 44th Worldskills Competition
2017 China International

Skills Competition - The
exclusive technical sponsor of
mobile robotics and electrical
installations, assisting Shanghai
to be the Worldskills bidding city
successfully。
As a gold member of Worlddidac
Association, Dolang is invited to 11
participate in the international
education equipment exhibitions
every year.
Dolang Attended Worlddidac Asia.
The Ministry of UAE Visited Dolang Booth in GESS Dubai 2017.

12
2016 Chinese Skills Competition - “Dolang-Everte Cup”
National Industrial Robot Technology Skills Competition
Bulid the competition platform, select the skilled personnel,

contribute to "made in China 2015", promote the development
of intelligent manufacturing.
Dolang cooperates with ABB to build laboratories for vocational education.
We understand that one complete solution can not solve all the problem,
so in order to meet needs from different customers, we will adjust our 13
solution and develop personalized products in accordance with customer's
needs at all time.
Dolang Cooperates With ABB to Build Laboratories for Vocational Education.
Group discussion
www.dolangeducation.com
Shandong Dolang Technology Equipment Co., Ltd.
14
Electrical and Electronic

Training Series, New
Energy Training Series
Electrical and Electronic Training Series ,New Energy Training Series
Electrical Maintenance Skill Training Series

15
DLWD-ETBE12D730M Electrical Skill Training Set
■ Technical parameter
● Input power ：AC380V, 50Hz ；Three-phase, five wires
● Dimension ：1600×800×1800mm （length×width×height）
● Capacity <1.5kVA
● Power control
Auto air-break switch on-of power with short circuit protection device, leakage protection device, ground
protection and scram protection.
● AC power output:
Three-phase, five wire DC380V±10％ ,safety sheath output
Three-phase, five wire DC220V±10％ ,safety sheath and three multi-function output
● DC stabilized power supply: 1.25 ～ 30V/2A accuracy of adjustment 1%, Self-recovery function and short
circuit soft limit
● Voltmeter: Digital DC voltmeter 0 ～ 200V,precision 0.5grade
● Ammeter: Digital DC Ammeter 0 ～ 6A, precision 0.5grade
■ Training Project
● Lighting circuit and indoor line ● Control of lighting fittings
● Installation of lighting circuit ● Capacity, power distribution unit installation
● Power circuit ● Installation of power circuit
● Installation of three-phase watt-hour meter 8.Forward control circuit for motor
● Multispeed asynchronous motor control circuit
……

16
■ DLWD-ETBE12D730 Electrical Skill Training Workbench National Patent No. of Mesh plate:
National Patent No.: ZL2003 3 0109800.X ZL2003 3 0109796.7
■ Technical Parameter
● Input power：AC380V, 50Hz；Three-phase, five wires ● DC stabilized power supply: 1.25～30V/2A
● Dimension： 1600×800×1680mm accuracy of adjustment 1%, Self-recovery function
● Capacity ≤1.5kVA and short circuit soft limit
● Power control ● Voltmeter: Digital DC voltmeter 0～200V,precision
Auto air-break switch on-off power with short circuit 0.5grade
protection device, leakage protection device, ground ● Ammeter: Digital DC Ammeter 0～6A,precision
protection and emergency stop protection. 0.5grade
● AC power output:
Three-phase, five wire DC380V±10％,safety sheath output
Three-phase, five wire DC220V±10％,safety
sheath and three multi-function output
● Control of lighting fittings ● Multispeed asynchronous motor control circuit
● Installation of lighting circuit ● Three-speed asynchronous motor control circuit
● Capacity, power distribution unit installation ● Basic control circuit of parallel/series DC motor
● Installation of three-phase watt-hour meter ● Basic control circuit of three-phase synchrony motor
● Three-phase asynchronous motor braking control circuit ● Lighting circuit and indoor line

17
DLWD-ETBE840M Electrical Know-how Training Workbench National Patent NO. : ZL2003 3 0109802.9
● Dimensions: 1000×800×1807 mm (length×width×height)
● Input power: three-phase five-wire AC380±10% 50Hz±10%
● power control: automatic air switch on and off the power supply, there are overvoltage protection, undervoltage
protection, overcurrent protection, leakage protection system.
● The output power:
·Three-phase AC 380V ± 10% 50Hz; single-phase AC 220V ± 10% 50Hz.
·DC24V DC output, with current limiting short circuit soft protection and self-recovery function.
■ Training projects
● Lighting electric light source and indoor circuit ● Power line
● motor forward rotation control line
● Forward and reverse control line of three-phase asynchronous motor
● Three-phase asynchronous motor step-down starting control line
● Brake control circuit for three-phase asynchronous motor
● Multi-speed asynchronous motor control circuit
● Three-speed asynchronous motor control circuit
● Basic control circuit of shunt/series excitation DC motor
● Basic control circuit of three-phase synchronous motor
● Machine tool electrical control circuit

18
DLDS-1214F Electrical Installation Training System
● Outline dimension: ladder structure, outer side is established by patch board, and inner side is established by
five simulation metopes.
Left hand panel board （A）/1200mm x 2400 x1.8 mm
Right hand panel board（B）/1200mm x 2400 x1.8 mm
● Front panel board dimension
Panel board (1) 1000 x 952.5 x 1.8mm two plates Panel board(2) 1000 x 792.5x 1.8mm two plates
Panel board(3) 1745 x 378 x 1.8mm one plate
Ceiling board （D）/front 2624mm,back 1816 mm,depth:1262 mm
● The included angle between the left panel and the main panel is 109.
Operation desk:1500(L)X750(W)X800(H) Input power: three phase three wires 380V±10% 50HZ
Working environment: environment temperature range -5 ～ 40℃
● Capacity: AC ＜ 4KVA
Safety Protection: leakage protection（working current ≤ 30mA),overcurrent protection, overload protection,
emergency stop protection, undervoltage protection
● Relative humidity: ＜ 85％

19
● Skill training of basic electrical installation
a. The practical training of installation tools
b. The practical training of measuring instruments
c. The practical training of processing PVC bending pipe by hand bending machine , ect.
● Indoor lighting and power distribution
a. One switch to control one lamp and socket b. Two dual joint switches to control one lamp
c. Three switches to control one lamp d. Air conditioning socket to control circuit
e. Digital segment switch to control lamp
● Electrical control
a. Jog control circuit by asynchronous motor
b. Asynchronous motor self-locking control circuit
c. Asynchronous motor control circuit at two places
d. Sequence start of three phase asynchronous motor by hand
e. Asynchronous motor button Y-Δ control circuit
f. KNX overall installation and wiring training , ect.
Other variant products of the same series:

DLDS-1214A Electrical Installation Training System DLDS-1214B Electrical Installation Training System
DLDS-1214C Electrical Installation Training System DLDS-1214D Electrical Installation Training System

20
DLWD-ETBE12D-II Advanced Electrical Maintenance Skill Training&Assessment Series
● Input power: 380V±10% 50Hz ；Three-phase, five wires
● Environment: Ambient temperate range: -5 ～ 40℃
● Capacity current: AC<1.5KVA
● AC: Excitation source< 0.5A
● Armature power supply< 2A
● Dimension: 1810x720x1620mm(L*W*H)
● The general power control, with leakage protection, when the leakage current reaches 30mA,
the protection device action
● 3 pcs AC voltmeter 450V with indicator
● Single-phase start stop control circuit ● Asynchronous motor jog control circuit
● Asynchronous motor two ground control circuit
● Button interlocking three-phase asynchronous motor forward and reverse control circuit
● Contactor interlocked three-phase asynchronous motor positive and negative control circuit
● Double interlocked three-phase asynchronous motor positive and negative control circuit
● One-way step-down start and reverse brake control circuit
● Asynchronous motor reverse brake control circuit DLWD-ETBE12D-G Middle
● T68 trampoline lathe control circuit Level Electrical Maintance
● Common faults diagnosis and troubleshooting of CA6140 lathe electrical control circuit unit Skill Training Series
(16 fault phenomena, automatically setting).
……

21
DLWD-DJB02 Motor & Transformer Maintenance & Test Training System
● Input voltage: three-phase five-wire 380V ± 10% 50HZ
● Operating environment: Ambient temperature range -5 ~ 40 ℃
● Installed capacity: AC <1.5KVA
● security: leakage protection (operating current ≤ 30mA), overcurrent protection, fuse protection
● DC:. DC220V Power <1A
● Ambient temperature:. -10 ℃ ~ 40 ℃
● Relative humidity:. ≤ 90% (25 ℃ )
● Dimensions: length × width × height = 1950 × 700 × 1500
● Training content of training module
● Transformer training content
● Single-phase capacitor asynchronous motor training content
● Three-phase asynchronous motor training content
● DC separate excited motor training content . ect.

22
DLDC-DJ01 Motor Training System
● Input power: three-phase five-wire AC380V ± 10% 50Hz
● Working environment: -10 ℃ - 45 ℃ , relative humidity <90% RH (25 ℃ ), altitude <4000M
● Device capacity: <1.5KVA
● Output power: three-phase AC380V ± 10% 50Hz, single-phase AC220V ± 10% 50Hz DC24V (2 ways)
● The general power control with leakage protection, when the leakage current up to 30mA, the protection
device action.
● Grid voltage instructions with 3 pcs 450V AC voltmeter pointers.
● Training bench dimension: length × width × height: 1700 × 700 × 1750mm
● Software Installation
● PLC programming software and programming practice experiment
● PLC and CANLINK Servo Communication
● Compound Excitation Motor Electricity-Generating Experiment
● DC Motor Speed Regulating Experiment
● DC Motor Electricity Generating Experiment of Motor 2
● DC Motor 1 and Motor 2 Replace Motor Experiment

23
DLWD-DJ22-M Induction Machine Training System
● Input voltage three-phase five-wire: 380V ± 10% 50HZ
● Working environment temperature range: -5 ~ 40 ℃
● Device capacity
● AC power: <1.5KVA
● DC excitation power supply: <0.5A
● Armature power supply: <2A
● Dimensions L × W × H = 1810x720x1620mm3
● Frequency Converter Panel Control Motor Start and Stop
● External Terminal Control Experiment Based on Frequency Converter
● Reverse Switch Control Motor Forward and Reverse Experiment
● Combination Switch Control Two-speed Motor Experiment
● Contactor Controlled Motor Self-locking Experiment
● Dual-interlock Three Phase Asynchronous Motor Forward/Reversing Control Circuit
● Y- △ Start Experiment Controlled by Contactor
● Y- △ Start Experiment Controlled by Time Relay
● Three-phase Asynchronous Motor Sequence Control
● Single-phase Capacitor Motor Start Experiment
● Single Phase Capacitor Motor Forward and Reverse Experiment
……

24
DLWD-DJ21Motor and transformer training system
● Input power: three phase four wire 220V±10% 50Hz
● Working environment: temperature - 10 ℃ ~ + 40 ℃ relative humidity < 85% (25 ℃ )
● Installed capacity: < 1.5 KVA
● Weight: 300 kg
● Dimension: 1600 x 750 x 1300 (mm)
● DC motor experiment
● Single-phase transformer experiment
● Three-phase transformer experiment
● Asynchronous motor experiment
● Test of stator resistance of three-phase wound asynchronous motor
● three-phase asynchronous motor no-load experiment: measuring no-load voltage U0, current I0,
three-phase power P0, draw no-load characteristic curve
● three-phase asynchronous motor short-circuit experiment: measuring short-circuit voltage UK,
current IK, power PK, draw short-circuit characteristic curve
● Determination of parameters of three-phase asynchronous motor
● Mechanical characteristics of three-phase asynchronous motor under various operating conditions

25
DLWD-DJSX-T Synchronous Motor Training System
● Working environment temperature range : -5 ~ 40 ℃
● Device capacity:AC<1.5KVA
● Dimensions: L × W × H = 1810x720x1620mm
● General power control, three-phase, five-wire output with leakage protection, when the leakage current
reaches 30mA, the protection device action
● three-phase asynchronous motor jog control circuit
● Three-phase asynchronous motor contactor self-locking control circuit
● Contactor control circuit for three-phase asynchronous motor with overload protection
● Continuous and jog hybrid forward control line installation
● contactor interlocked three-phase asynchronous motor forward and reverse control circuit
● button interlocking three-phase asynchronous motor forward and reverse control circuit
● button and contactor double interlocking three-phase asynchronous motor forward and reverse control
circuit
● multi-ground control of three-phase asynchronous motor
● Winding motor control and rotor string resistance speed regulation
● Y- △ start automatic control circuit
……

26
DLWD-DJ05 Electric Machine Training System
● Working environment temperature range : -5 ~ 40 ℃
● Device capacity:AC<1.5KVA
● Dimensions: L × W × H = 1810x720x1620mm
● General power control, with leakage protection, when the leakage current reaches 30mA, the protection
device action
● The grid voltage instructions with 450V AC pointer voltmeter 3 units.
● Three-phase asynchronous motor contactor inching control circuit
● Three-phase asynchronous motor contactor control circuit with overload protection
● Continuous and inching mixed forward control circuit installation
● Interlocking contactor three phase asynchronous motor forward/reversing control circuit
● Button interlocked three-phase asynchronous motor contactor forward/reversing control circuit
● Button&contactor dual-interlock three phase asynchronous motor forward/reversing control circuit
● Multi-control of three - phase asynchronous motor
● Wound-rotor induction motor control and rotor series resistance speed control
● Y- △ start automatic control circuit
……

27
DLWD-ETBEZMXT Electrical Installation Training System (in module)
● Power input: AC380V, 50Hz; three-phase five-wire system
● Power output: Necessary power module
● Dimension: 1600 × 1370 × 1800mm (L × W × H) (the dimension may change according to actual design)
● Capacity: ≤ 1.5kVA
● Power control: Use automatic air switch on/off power supply, with short circuit protection system, leakage
protection system, the voltage value can be set according to the actual situation of their own over-voltage
protection system, the voltage value can be set according to the actual situation of set under voltage
protection system.
● Single-pole switch control circuit
● Single switch control socket and ground fault protection circuit
● Dimming incandescent control circuit ● Pulse and current switch control circuit
● Automatic stairway lighting switch (three-wire and four-wire) control circuit
● Dual-loop control of the fluorescent lamp control circuit
● Sodium lamp control circuit ● High pressure mercury lamp control circuit
● Dimming fluorescent lamp control circuit ● 7 path switch control lamp control circuit, ect.

28
DLWD-ETBE12D-B Basic Electric Training System
● Input power: three-phase five-wire AC380V ± 10% 50Hz
● Output power: AC380V ± 10% 50Hz, AC220V ± 10% 50Hz
● Working environment: -10 ℃ --- 45 ℃, relative humidity: ≤ 95% RH (25 ℃)
● Dimensions: 1600 × 730 × 1300mm
● The characteristic of reduction of voltage experiment
● The half-wave rectifying circuit experiment
● The full-wave rectification experiment
● Measurement of DC current electrical parameter
● Characteristic of RC filtering
● Characteristic of capacitor filtering
● Experiment of variable load

29
DLWD-ETBE12D-L Primary Electrical Lighting Skills Assessment Training Device
● Working power: three-phase five-wire system ~ 380V ± 10% 50Hz;
● Operating temperature: -10 ° C to 40 ° C, relative humidity <85% (25 ° C), height <4000m
● Action current leakage protection: ≤ 30mA
● Leakage protection action time: ≤ 0.1s.
● Dimensions: length × width × height = 1810 × 720 × 1620mm
■ Training Projects
● socket and a switch to control a lamp (incandescent lamp, fluorescent lamp + two pole leakage switch)
● two double switch control a lamp (incandescent, fluorescent + diode leakage switch)
● three switches control a lamp (incandescent, fluorescent + diode leakage switch)
● the wiring of the lamp line
● voice control switch incandescent lamp circuit wiring
● single-phase watt-hour meter direct wiring circuit
● single-phase watt-hour meter by the current transformer wiring circuit
● voltmeter, ammeter wiring circuit
● universal switch of the voltmeter to measure three-phase voltage wiring
● a current transformer for single-phase circuit control circuit wiring
……

30
DLWD-ETBE-G04 Industrial Circuit Skills Training Assessment Device
● Power supply: three-phase five-wire power supply AC380V / 220V 50HZ;
● Dimensions: 850 × 800 × 1700mm
● Gantry materials: cabinet steel structure
● Capacity: ≤ 1.5KVA
● Security measures: with ground protection, leakage overload over current protection, with misuse protection;
safety in line with the relevant national standard, all materials are in line with environmental standards.
● Electrical control training

● Three-phase asynchronous motor direct start control
● Three-phase asynchronous motor contactor Jogging control circuit
● Y- △ Start the automatic control circuit
● Contactor interlocking positive and negative control lines
● Push-button interlocking three-phase asynchronous motor contactor reversing control circuit
● Double interlocking three-phase asynchronous motor positive and negative control lines
● Machine electrical control troubleshooting test
● C620 lathe failure assessment training (15 points of failure, automatically set it)
……

31
DLWD-ZD1200/6 Low and Middle Voltage Simulation Training System
● AC power :Three phase AC380V±5% 50Hz;
● Output power: AC 220V adjustable power, DC 220V power, DC220V adjustable power
● Temperature:-10℃～ 40℃ ；
● Humanity: ≤ 90%（25℃）；
● Altitude: ≤ 3000m
● Capacity: ≤ 2.5KVA ；
● Measuring training of DC voltage ,ammeter
● Measuring training of AC voltage ,current ,power ,power factor ,frequency
● Safety training of ground protection
● Comprehensive training of three phase transformer
● Comprehensive training of three phase voltage regulator
● Comprehensive training of three-phase five-pole voltage transformer
● Comprehensive training of zero sequence current transformer

32
DLWD-XD35A Modern electrician skills training assessment system
● Working power: Three-phase five wiring :AC380V/220V 50Hz
● Dimension:850×800×1700mm（L×W×H）; 600×530×1000mm(L×W×H)
● Maerial: Cabinet steel structure ● Capacity: ≤ 1.5KVA
● Safety Protection: Grounding protection, leakage overload and overcurrent protection function, with
misoperation protection function; safety conforms to relevant international standard, all materials are in
line with environmental protection standards
● Switchingconnect to voltmeter to test three-phase voltage
● Measurement of three phase current
● Connection of sequential control circuits for multiple (3 or less) motors
● Connections of two-speed motor speed control circuit for time relay switching
● Two-speed motor speed control button to switch control circuit
● Inverter panel function parameter setting and operation
● PLC control three-phase asynchronous motor Y- △ start circuit training;
● Parameters of the temperature controller training;
● Temperature control training based on thermal resistance (thermocouple);
● PLC temperature control training based on thermal resistance (thermocouple);
● Based on analog quantity PLC control training;
● Current adjustment circuit training;
● thyristor DC motor speed open loop control training;
……
Machine Tools Maintenance Training Series (Model-type)

33
DLJCS-G4 Intelligent Four-in-One Machine Tools Electrical Skill Training System (Semi-physical)
● Semi-physical size:
Semi-physical model work table size: 1280 × 780 × 775mm
M7120 surface grinder semi-physical size: 1040 × 452 × 738.5mm
● Semi-physical parameters of M7120 surface grinder:
Worktable movement stroke: 340mm
Grinding wheel frame lifting stroke: 200mm
Grinding head telescopic stroke: 250mm
● Make students familiar with the mechanisms and principles of
commonly used low-voltage electrical appliances. Wireless intelligent training appraisal
system of Dolang
● In the electrical schematic mode, students use the principle
analysis to find out the fault point on a certain line.
● Improve students' hands-on ability and skill level.
● Eliminate the common faults of the machine tool by
troubleshooting the machine tool.
● You can set the fault point as a skill assessment station for the
maintenance electrician.
● CA6140 lathe electrical control training.
● CA6140 lathe electrical line troubleshooting assessment.
● M7120 surface grinder electrical control training.
……
Power Supply Training Assessment Series

34
DLWD-5A I Low-voltage Power Supply & Distribution Assessment Training System
● Input power: 3 phase 4 fires AC380V±10% 50±2%Hz
● Capacities: ≤ 3kVA
● Workbench equipped with standard high voltage distribution cabinet with safety lock
● Dimension: No less than 1800mm×800mm×800mm（One cabinet)
● Microcomputer protection device measurement component accuracy: scale error: no more than 1%;
measurement current: 0.2; bus voltage: 0.2; output accuracy: 0.2; frequency: 0.01HZ; P, Q, COSΦ;
Resolution: no more than 1ms
● Stop transmission power system simulation ● Transformers Wiring Measurement Experiment
● Low-voltage switching operation ● Stop transmission operation of universal circuit breaker
● Motor training project
● Autoreclosure device training
● Definite time delay overcorrect protection
● MCGS basic configuration training project
● Motor star delta configuration training project
● Siemens Software experiment
● Listing operation training
● Systems stop transmission training
● PLC control inverter motor multi-stage control speed and other training
● Low voltage protection training
● Motor reversing training. ect.
Electronic Training Series

35
DLDZ-165E Electronic Circuit Training Equipment
■ Technology parameter
● Input power: Single-phase three-wire AC220V ± 10% 50Hz
● Output power: DC±5V/1A、DC±12V/1A
2-way AC7.5V, 2-way AC15V, compatible with independent winding and neutral shaft output
Protection measures: AC 220V uses safety sockets and safety terminal output;
● Installed capacity: <1KVA
■ Training project
● Analog circuit related experiment ● Digital circuit related experiment
· Transistor common emitter single tube amplifier · TTL collector open gate and three-state output
experiment gate test experiment
· Transistor two-stage amplifier experiment · CMOS integrated logic gate circuit parameter
· Field effect tube amplifier experiment test experiment
· Emitter follower experiment · Connection and drive of integrated logic circuits
· Differential amplifier circuit experiment · Encoder and its application experiment
· Integrated operational amplifier indicator test · Data selector and its application
experiment · Trigger and its application
· RC sine wave oscillator experiment · Counter and its application
· DC regulated power supply - integrated voltage · DA/AD converter - comprehensive experiment
regulator experiment

36
DLDS-WXD12 Radio Debugging Work Skills Training Examination Identification System
● nput power supply: Single phase three wire 220V±10%，50Hz
● Output power supply: AC 220V±10%，50Hz AC 7.5V（1A）2 groups
● Fixed DC power supply +5V（1A），+12V（1A），+35V（1A），-12V（1A）
● Adjustable DC power supply ：0 ～ 30V（1A）
● Capacity ＜ 1.5KVA
● Working environment: Ambient temperature range -5 ～ 40℃，relative humidity <80%(25℃ )，altitude <3000m
● Dimension 2150×1042×1680mm or so（L×W×H）
● Power experiment
● Waveform generation / conversion experiment
● infrared transmitting and receiving experiment
● 2262/2272 wireless transmitting / receiving experiment
● Audio experiment
● Radio experiment
● Interphone experiment
● Audio and video experiment
● TV receiving local radio experiment
● TV receiving self-made radio experiment

37
DLDZ-DLDZ03 Power Electronic Technology and Automation Control Training System
● Input power: Three-phase four-wire( or three-phase five-wire) 380V±10％ 50HZ/60Hz
● Three phase leakage protection relay :Ｉ△n ≤30mA，time≤0.1S Provides over-current protection,
leakage protection, emergency stop button 。
● Temperature: –10℃－+40℃, Humidity: ＜85％（25℃）, altitude ＜4000m
● Capacity: ＜1.5 KVA
●Certificate: ISO9001,ISO14001,OHSMS18001 ,CE and SGS
● Warranty :one year
● Power electronic experiment
● power device and drive circuit experiment
● Typical power electronics circuit experiment
● Motor and drag basic experiment
● Electric drag automatic control experiment, ect

38
DLWD-DGJS13 Electrotechnics, Electronic and Electrical Drive Training System
● Input power: Three-phase five-wire 380V ± 10% 50Hz
● Output power: AC 0-450V, AC0-220V safety terminal output, AC220V output socket security
DC 1.25-30V multi- groups DC power security terminal output
● Working environment: temperature -10° C ~ + 40 C Relative humidity <85% (25 C) Altitude <4000m
● System capacity: <1.5kVA
● Basic electrotechnics instrumentation use and measurement error calculation
● The measurement of potential, voltage and drawing of circuit, potential
● Kirchhoff's law verification ● Thevenin theorem verification
● Norton Theorem verification
● The experiment researching of controlled source VCCS, VCVS, CCVS, CCCS
● R, L, C component impedance characteristic test
● The testing of single-phase core transformer features
● Three-phase AC circuit voltage, current measuring
● Three-phase asynchronous motor contactor inching control circuit
● Y- △ start automatic control circuit ● Multi control of three phase asynchronous motor
● The basic parameters test of the integrated operational amplifier
● Integrated addition circuit ● Waveform generating circuit
……

39
DLDP-YD510 MCU Training Assessment System
■ Technical parameters
● Power input: 1.1 Single-phase AC220V±10% 50Hz
● Power output: DC±1.25 ～ ±30V/0.8A ；DC±5V/1A、DC±12V/1A ；DC 24V±5％ /1.5A ；Capacity ≤ 1KVA
● Working environment: Ambient temperature: -5~40℃ , Relative humidity <80% (25℃ )
Aaltitude < 4000 m
● Outline dimension: 2150×1042×1680mm (L x Wx H)
● buzzer experiment ● marquee experiment
● digital tube display experiment ● dot matrix experiment
● 12864 liquid crystal experiment
● PS/2 interface experiment
● array button experiment
● eight-bit switch experiment
● clock chip experiment
● RS485 communication experiment
● active crystal oscillator frequency division experiment
● and the serial circuit experiment
● serial and circuit experiment
● I / O expansion and dual three-state buffer circuit experiment
● relay circuit experiment
New Energy Training Series

40
DLXNY-FN02 Wind-sloar Complementary Training System
● Input voltage: AC220V ± 10% / 50Hz
● Power consumption: wind simulation: 0.75KW simulated solar light: 200W
● The system output power: 220VAC 1500W 12VDC 500W
● The wind turbine: 12V / 300W ● Start wind speed: 2.0 m
● Wind wheel diameter: 1.3 m ● The axial fan: 220V / 0.75KW 0-1440r / min
● Solar Panel: monocrystalline 17.5VDC 10WP
Polycrystalline 17.5VDC 30WP
● Working environment: 0 ℃ ~ 40 ℃ ● Relative humidity: ≤ 85% RH
● Wind and solar Experiment
● The wind power experiment
● The photovoltaic power generation experiment
● Experimental wind and solar controller
● The battery charging and discharging experiments
● The off-grid inverter load test run
● Experimental solar panel series
● Solar Battery Controller test series
● Solar photovoltaic inverter test series
● Demonstration Experiment of Synchronous Wind Turbine Operation Process and Wind Energy Conversion,
and so on.

41
DLXNY-FN01 Wind Power Generation Training System
● Wind turbine ● Temperature and humidity sensor
· Power: 400W · Temperature resolution: 0.1℃(16 bits)
· Impeller diameter: 1.65m · Temperature range: -40℃ ~ +80℃
· Starting wind speed: 2.3m/s · Humidity resolution: 0.1% RH (16 bits)
· Cutting wind speed: 3m/s · Humidity accuracy: 3% RH (25 ℃), 5%
· Rated wind speed: 12m/s RH (0 ~ 50℃)
● Wind speed and direction meter ● Adjustable air blower

· Wind speed: 0~60M/S · Air flow: 4670/h
· Wind direction: 0~360° · Air pressure: 1275Pa-2138Pa
· Accuracy: 0.3M/S3° · Fan power: 5.5KW
· Working power: AC220V, 50Hz,·DC12V optional
· Others: over wind speed alarm, under wind speed
alarm, liquid crystal display
● Scenery complementary experiment ● Solar panel characteristics experiment series
● Wind power experiment ● Solar battery controller experiment series
● Photovoltaic power generation experiment ● Permanent magnet synchronous wind turbine operation
● Wind and solar hybrid controller experiment process and wind energy conversion demonstration
● Battery charge and discharge experiment experiment and so on.
● Off-grid inverter operation with load test

42
DLXNY-ST04 Solar Photovoltaic Integrated Training System
● Input power supply: 220V + 10% 50HZ
● Size of equipment: 1550mm x 800mm x 1750mm
● Coverage: 2 square meters (single station)
● Overall weight of equipment: 40Kg
● Working environment: temperature - 10 ~40 C
● Relative humidity < 85% (25 C)
● Demonstration experiment of solar cell power generation
● Energy conversion experiment of solar photovoltaic panels
● Effects of Environment on Photovoltaic Conversion
● Direct Load Characteristic of Solar Cell Photovoltaic System
● Demonstration experiment of solar controller
● Connection and Counter-protection Experiments
● Overcharge Protection of Batteries by Solar Controller
● Over-discharge protection experiment of solar controller for storage battery
● Night anti-refill experiment
● Demonstration experiment of off-grid inverter
● Demonstration experiment of grid-connected inverters
● Experiment 12: Photovoltaic grid-connected experiment

43
DLXNY-ST03 Portable Solar Power System
● Input Power: 220V ± 10% 50HZ
● Equipment Size: 470 × 560 × 260mm
● Working environment: Temperature -10 ℃ ~ 40 ℃
● Relative humidity <85% (25 ℃ )
● Solar cell power generation principle experiment
● Photovoltaic panels energy conversion experiments
● The environmental impact of photovoltaic conversion experiments
● Solar photovoltaic system directly load characteristics test
● Experimental solar controller works
● reverse protection experiment
● Solar controller battery overcharge protection experiments
● Solar controller battery over-discharge protection experiments
● Anti-anti-charge at night experiment
● Off-grid inverter working principle experiment

44
DLXNY-GF05 Photovoltaic Power Generation Training System
● Dimension:Photovoltaic power unit 1610×1010×1550mm ● Training cabinet 3200×650×2000mm
● Photovoltaic power unit ● Rated power: 20W
● Rated voltage: 17.2V ● Rate current: 1.17A
● Open-circuit voltage: 21.4V ● Short-circuit current: 1.27A
● Dimension: 430mm×430mm×28mm ● PLC module: AC220V/DC24V
● Invert Input Voltage ：DC12V ● Invert Input voltage range：DC9.5V-15.5V
● Invert Output voltage ：AC220V±5% ● Invert Rated output ampere：1.4A
● Invert Output frequency ：50Hz±0.5Hz ● Invert Rated frequency：300VA
● Invert Output waveform ：sine wave ● Invert waveform distortion：＜5%
● Invert Transform frequency ：＞ 85%
● Working Principle Experiments of Single Crystal Silicon Photovoltaic Cells
● Design experiment of solar cell module square array
● Composition and control experiment of photovoltaic power supply device
● PLC Programming Manual and Automatic Photovoltaic Cell Tracking Solar Experiment
● Operating Characteristic Experiments of Photoresistors and Voltage Comparators
● Operating Principle Experiments of Light Sensors
● Design of Electrical Control Principle for Photovoltaic Power Supply System
……

45
DLXNY-GF07 Type Comprehensive Training System of Solar Photovoltaic Power Generation
● Working power: AC220V 50Hz
● Working environment: the ambient temperature range of -10 ~ 40 ℃ relative humidity ≤ 85% (25 ℃ )
altitude <4000m
● Total power control, with leakage protection function, when the leakage current up to 30mA, the protection
system action.
● Maximum power consumption ≤ 2.0KW
● Principle of solar cell power generation experiment
● Energy conversion experiment of solar photovoltaic panels
● Influence of Environment on Photovoltaic Conversion
● Experimental Study on Direct Load Characteristics of Solar Cell Photovoltaic System
● Training of solar controller working principle
● Reactive protection of photovoltaic power generation system experiment
● Experiment on Overcharge Protection of Battery by Solar Controller
● Experiment on over - discharge protection of battery by solar controller
● Night anti-charge experiment
● The working principle of off - grid inverter
● Grid - connected inverter working principle

46
DLXNY-ST02 Solar Power Generation Experiment Platform
● Input power supply: 220V±10% 50HZ
● Size: 1550mm*200mm*800mm
● Floor space: 2 square meter
● Weight: 30Kg
● Work environments: temperature -10℃～ 40℃
● relative humidity ﹤ 85 ﹪（25℃）
● demonstration experiment of solar cell power generation
● solar photovoltaic panel energy conversion experiment
● experiment on the influence of environment on photovoltaic conversion
● direct load characteristic experiment of solar cell photovoltaic system
● solar controller work demonstration
● reverse protection experiment
● solar controller overcharge protection experiment of battery
● over discharge protection experiment of solar energy controller on battery
● night anti - filling experiment
● off-grid inverter working demonstration
● automatic tracking demonstration of solar photovoltaic panel
● use of illuminometer,

47
DLXNY-WP01 Wind- Photovoltaic Complementary Training System
● Dimension: Photovoltaic power unit 1610×1010×1550mm ● Photovoltaic power unit: 4 pcs
● Wind power unit 1578×1950×1540mm ● Rated power: 20W
● Training cabinet 3200×650×2000mm ● Rated voltage: 17.2V
● Training site area: 20 square meter ● Rate current: 1.17A
● Open-circuit voltage: 21.4V
● Short-circuit current: 1.27A
● Dimension: 430mm×430mm×28mm
● Off-grid wind and solar power system planning;
● Select, install and connect of the photovoltaic cell component according to the power requirements
● Select, install and connect of the wind generator according to the power requirements
● Maximum power point tracking program design of photovoltaic cell modules on basis of MCU;
● 5) Maximum power point tracking program design of wind generator on basis of MCU;
● Battery capacity matching calculation and selection;
● Battery charge and discharge parameters and protection parameter settings;
● Inverter parameters setting;
● Monitoring system configuration and operation;
● Photovoltaic power supply system debugging;
……
48
Mechanical Design
CNC Machine Training
Series
Mechanical design training series ,CNC machine training series
Mechanical Theory & Design Training Series

49
DLJX-ZT501 Mechanical Assembly and Adjustment Technology Comprehensive Training System
● Input power: single phase three line AC220V ±10% 50Hz
● AC reduction motor 1 set ：nominal capacity 90W, deceleration rate 1 ：30
● Shape dimension(training set): 1800mm×700mm×820mm
● Equipment weight: 600 kg
● Safety protection: has the leakage current protection, safety meet national standards
● Fitter basic operation skill training ● Task one crossed skills training
● Task two filing skills training ● Task three saw cutting skills training ,ect
● Assembly and adjustment of the Gearbox ● Assembly and adjustment of the gear reducer
● Assembly and adjustment of the press mechanism
● According to the assembly chart and the assembly know-how requirements, assemble and adjust bearings,
shaft, key, sliding gears, and the cabinet, etc.
● Assembly and adjustment of intermittent rotary worktable
● According to the assembly chart and assembly know-how requirements, assemble and adjust worm gear
and worm, four groove geneva wheel, bearing, steady ,etc
● The assembly and adjustment of two-dimensional worktable
● According to the assembly chart requirements, assemble and adjust linear guide rail, the ball screw, bearing
and steady, etc.
Mechanical Theory & Design Training Series

50
DLJX-JXXT Mechanical System Comprehensive Training Set
● The input power supply: single-phase three-wire AC220V ± 10% 50Hz
● The working environment: temperature -10 ° C to 40 ° C Relative humidity ≤ 85% (25 ° C) Height ≤ 4000m
● Dimensions: 1845mm x 690mm x 1770m
● Security: drain voltage, leakage current protection, security in line with national standards
● Speed and torque measurement
● Mechanical efficiency
● Shaft and seat belt bearing
● Shaft and flexible coupling
● Flat belt installation and tensioning
● Flat pulley installation and adjustment
● Belt drive speed, torque, and the transmission ratio
● Chain and sprocket installation and tension adjustment
● Chain drive speed, torque, and the transmission ratio
● Gear installation and adjustment, gear speed, torque and gear ratio, gear sets
● V-belt and jagged edges of the belt, ribbed belt drives, ect
Building Automation, Electrical Engineering and Automation Training System
51
Building Automation,
Electrical Engineering
and Automation
Training System
Building Automatic Training Series

52
DLLY-501A Building Automatic Technology Training Assessment System
● Total power input: AC220V ground.
● Direct power output: universal three-plug, AC220V.
● Controlled protection: 16A single-phase leakage protection switch, DC switching power supply.
● Controlled power output: safe plug interface, AC220V, DC24V, DC18V, DC12V.
● DC Power: DC24V_6A DC18V_8A, DC12V_12A.
● bus connection interface: safe plug interface, the maximum capacity of eight.
● computer network interface: RJ45 UTP shielded (10/100Mbps).
System components Installation
● System Wiring
● Set the relevant parameters of the video intercom access control system devices
● outside the host address setting ● indoor extension address settings
● ID card distribution and registered ● management center set
● outside the host call indoor extension ● indoor extension call management center
● outside the host call management center ● unlock password
● indoor extension to unlock ● credit card lock
● Visible interphone software records the door alarm information processing

53
DLLY-QDT262 Group Control Multifloor Elevator Trainer
● The input power: AC220V plus or minus 10% 50 Hz
● Rated power: 1 kw or less
● Environmental temperature: -10℃～ 40℃
● Relative humidity: 85% or less
● Physical size: 1420 * 500 * 1800 (length * width * high mm)
● PLC (programmable logic controller) : S7-1200
● Variable frequency device: G120
● Control mode: switch quantity/digital quantity double control and VVVF technology
● Layer: six layer × two
● the understanding of the electrical components ● the elevator area arrangement training
● electrical installation practice ● electrical principle design practice
● electrical wiring training ● in the car call ladder choose layer experiment
● its outbound ladder experiment
● elevator speed up and slow down the speed control experiment
● elevator flat layer control experiment ● car inside to open the door, close the door control test
● bridge repair experiment ● terminal limit protection experiment
● signal indicator system experiment ● car lighting control test
● elevator control system experiment ,ect.

54
DLLY-QDT361 Group Control Multifloor Elevator Training System
● The input power: AC380V plus or minus 10% (three-phase five line) 50 Hz
● Rated power: 1 kw or less
● Environmental temperature: -10℃～ 40℃
● Relative humidity: 85% or less
● Physical size: 1950 * 400 * 1800 (length * width * high mm)
● PLC (programmable logic controller) : FX2N-64MR
● Variable frequency device: FR-D720
● Tractor power: 90W/380V
DLLY-DT61 Six Floors Elevator
● Layer: six layer × Three set
● The understanding of the electrical components ● The elevator area arrangement training
● Electrical installation practice ● Electrical principle design practice
● Electrical wiring training ● Internal car call ladder choose layer experiment
● Its outbound ladder experiment
● Elevator speed up and slow down the speed control experiment
● Elevator flat layer control experiment ● Car inside to open the door, close the door control test
● Bridge repair experiment ● Terminal limit protection experiment
● Signal indicator system experiment ● Car lighting control test
● Elevator control system experiment
55
● The training system is ● The training system can ● The raining system ■ PC signal acquisition
not only suit for students, take advantage of the test kits contains various software
but also suit for technical provided location sliding types of the sensors
● The training system
personnel of industrial rail to do a various sensor (including optical, magnetic,
provides PC software.
electrical, mechatronics testing distance measuring capacitance, inductance,
Real-time collect
engineering, electrical and effect of sensor's angle ultrasonic, Hall, eddy current
experimental data by PC
equipment installation, impact on the detection sensors, etc.).
module to communicate
electrical power, electronic distance.
with the computer, dynamic
equipment installation, ● Sensor principle,
or static processing and
automated processing, non-power electrical
analysis data, and it
regulation and control measurement technology,
has a six-channel virtual
technology and other optical testing technology,
oscilloscope function.
aspects, and machinery mechatronics, electrical
and automation, PLC, process
electrical engineer training, control and regulation
processes and process technology, embedded
management training microcontroller technology.
electrical engineers.
Sensor Training Series

56
DLCG-DS130 Sensor Training System
● Input power: AC220V±10% (Single phase three wire)
● Experiment power supply: DC 24V
● Rated power: <1000VA
● Turn source:0 ～ 200 r/min (adjustable)
● Environment temperature:-10℃～ 40℃
● Relative humidity: ≤ 85%
● Outline Dimension: 1580*750*1700mm (Table size) DLSoft-STS Sensor signal acquisition system
● Photoelectric sensor experiment. ● Capacitive sensor experiment.
● Inductive sensor experiment. ● Electromagnetic sensor experiment.
● Ultrasonic sensor experiment. ● Pressure sensor experiment.
● Capacitive proximity sensor experiment ● Inductive proximity sensor experiment
● Electromagnetic proximity sensor experiment ● Mechanical strain gauge experiment
● Cylinder pressure measurement experiment
● Air pressure test experiment
● PT100 temperature detection experiment
● Motor speed test
● Displacement measurement and control experiment
Hydraulic & Pneumatic Integrated Solutions

57
Hydraulic Training Series

58
DLYY-DH202 Advanced Electro Hydraulic Training System
● Dimensions: 1360*650*1650mm
● Input power: AC 380V 10% 50/60 HZ
● Capacity: 1.5KVA
● System flow: 5 L/min
● Working pressure: 4-6Mpa
● Basic electric control ● Relay control hydraulic basic circuit
● Hydraulic control circuit ● PLC directive programming, ladder chart
● The flow speed regulator circuit using throttle valve program
● Speed regulator circuit using speed regulator valve ● The learning and application of PLC program
● Sequence action circuit with stroke valve software
● Sequence action circuit with sequence valve ● Reversing circuit of PLC control solenoid valve
● Sequence action circuit with travel switch ● The other circuit design by themselves
● Sequence action circuit controlled by pressure relay
● One-way locking circuit with pilot-operated check valve
● Double-way locking circuit with pilot-operated check valve
● Locking circuit with 4/3-WAY solenoid valve(O)

59
DLYY-PGSX-01 Hydraulic Troubleshooting Comprehensive Trainer
● Input power: AC 380V 10% 50/60 HZ
● Capacity: 3.5KVA
● System flow: 8L/min
● System pressure: 16Mpa
● Basic knowledge of hydraulic system failure;
● Fault classification of hydraulic system;
● Failure modes of hydraulic components and systems;
● The basic contents of hydraulic fault diagnosis and so on.
● Diagnosis and troubleshooting methods of hydraulic pump faults;
● Diagnosis and troubleshooting of mismatching of hydraulic components;
● Causes and elimination methods of hydraulic noise;
● Diagnosis and elimination of pressure valve failure;
● Fault diagnosis and elimination of reversing valve;
● Assessment and elimination of system design faults;
● Diagnosis and elimination of hydraulic pressure-holding fault; DL-HPASS Hydraulic and Pneumatic
● Diagnosis and elimination of system leakage (internal leakage Simulation Software
and external) and

60
DLYY-DH301 Proportion Hydraulic Training System
● Input power: AC380V 10% 50/60 HZ
● System flow: <6L/min
● System pressure: 4-6Mpa
■Training Project
● Basic electric control
● Hydraulic control circuit
● The flow speed regulator circuit using throttle valve
● The speed regulator circuit using speed regulator valve
● Fast moving circuit of hydraulic cylinder differential connection
● Sequence action circuit using sequence valve
● Sequence action circuit use stroke switch control
● Sequence action circuit use pressure relay control
● One-way atresia circuit use hydraulic control one-way valve
● Double-way atresia circuit use hydraulic control one-way valve
● The lock circuit using O type shuttle valve
● relay control hydraulic basic circuit
● Proportion hydraulic circuit experiment and so on.

61
DLYQ-PH401 Double Side Hydraulic and Pneumatic Trainer
● Dimensions(test bench): 1600*850*1700mm
● Dimensions(aluminum plate): 1200*750mm
● Input power supply: AC220V 10% 50/60 HZ
● Flow : 4.5 L/min
● Pump power: 1.5KVA
● Output power: 4-6 Mpa
■Training Project
● The structure and working principle of proportional servo cylinder
● Characteristic experiment of proportional servo cylinder
● Understand the difference between proportional valve and servo valve
● Frequency characteristic analysis of servo control system
● Displacement control characteristics of servo control system
● Frequency characteristic analysis of proportional control system
● Displacement control characteristics of proportional control system
● The working principle of pressure sensor
● The working principle of displacement sensor
● Structure and working principle of electro-hydraulic servo valve
……

62
DLYY-ZHSX02 Hydraulic and Pneumatic Transmission Integrated Training System
● Input power ：three phase four wire 380V±10% 50Hz ；
● Working environment ：temperature -10℃～ 40℃ relevant humidity ≤ 85%（25℃）capacity ：≤ 5.0kVA
● Experiment table dimension ：2200mm×900mm×1700mm
● Hydraulic station dimension ：1220mm×850mm×900mm
● Safety protection ：with voltage leakage protection、current leakage protection、in line with national standard
● Installation and commissioning of double pump hydraulic station
● Pressure regulating circuit
● Speed regulating circuit
● Directional control circuit
● Stacked valve circuit construction and commissioning
● Proportional speed control valve integration training projects
● Pneumatic circuit training project
● Double cylinder control circuit construction and debugging of pneumatic feeding device
● Pneumatic manipulator control circuit construction and debugging of pneumatic unloading device
● Use superposition valve to build simulation host (press machine、combined machine tools etc.) hydraulic
system and debugging
……
Pneumatic Training Series

63
DLQD-DP202 Advanced Electro Pneumatic Training System
● DC power: input, AC 220V, Output: DC 24V/3A
● Air compressor (basic equipment minimal machine): power: AC 220V±10% 50Hz motor power: 600W
● Nominal volume: 9L nominal output pressure 0.7MPa, noise degree: 66dB
● Groove interval: 25mm
● Table top structure: 1
● With crack slot truckle: 4
● Pneumatic basic control circuit experiment, ●Interlocking circuit,
● Single acting cylinder automatic control, ● Single cylinder single reciprocating
● Double acting cylinder automatic control, control circuit,
● PLC control technical application ● Single cylinder continuous reciprocating
● Relay control technical application action circuit,
● Other comprehensiveness, expansibility experiment ● Straight line cylinder , rotate cylinder
type pneumatic circuit. sequence action circuit,
● Single acting cylinder speed control circuit, ● Multi cylinder sequence action circuit
● Double acting cylinder one-way speed regulation circuit, ● Magnetic induction type proximity switch
● Double acting cylinder both-way speed regulation circuit, application;
● Speed changing-over circuit, ● Sensor application in control system;
● Overload protection circuit, ……

64
DLQD-DP301 Proportion Pneumatic Training System
● Power: AC 220V 50HZ/60HZ
● Equipment Size: 1360 (L) X650 (width) X1650(Height)
● Working environment: Temperature -10 ℃ ~ + 40 ℃ ;
● relative humidity <85% (25 ℃ ); altitude ≤ 4000m
● Machine capacity: <1KVA
● Flow and pressure control (pneumatic capacitor)
● Speed - pressure control (cylinder)
● Closed loop speed control (Pneumatic motor)
● 5/3 manual valve directional circuit
● 5/3 solenoid valve directional circuit
● 5/3 proportional solenoid valve directional circuit
● PLC programming controller application
● Applications of PID controller
● Comparator circuit module applications
● Sensor Applications

65
DLQD-DP401 Double side Pneumatic and PLC Integrated Training System
● DC power: input, 220V+ 10%,50Hz
● Working conditions: temperature - 10 ℃ to 40 ℃ relative humidity ≤ 85%（25℃）
● The device capacity: ≤ 1.0kVA
● Appearance size: 1600 mm * 800 mm * 1700 mm
● Aluminum alloy panel size: 1200 (length) x 750 (width)
● Groove interval: 25 mm
● Aluminum wood cabinets: 2 pieces
● With crack slot castor: 4 pieces
● Air compressor (basic configuration minicomputers)
● Power supply: AC 220 v + 10% for 50 hz, Motor power: 600 w
● Nominal capacity: 9L rated output pressure 0.7 MPa, Noise level: 66 db
● Safety protection: the leakage voltage and leakage current protection, safety in line with national standards
● The building and debugging of ● Pneumatic basic experimental ● PLC programming and debugging
the Pneumatic circuit circuit example: Training Project
● Basic pneumatic control loop ● the commutation circuit of the ● PLC directive program,ladder chart
experiment; single-acting cylinder ; program
● Single-acting cylinder automatic ● the commutation circuit of the ● The leaning and application of PLC
control; double-acting cylinder; program software
● Double-acting cylinder automatic ● the single-acting cylinder speed ● The shuttle valve of PLC control
control; control circuit; solenoid shuttle valve
…… …… ……

66
DLQD-X1 Pneumatic Training System (Portable type）
● DC power: input, AC 220V, 50Hz/60 Hz Output: DC 24V/3A
● Air compressor (basic equipment minimal machine): power: AC 220V±10% 50Hz/60Hz motor power: 480W
● Nominal volume: 6L normal output voltage 0.85MPa, noise degree: 66dB
● Groove interval: 25mm ● Table top structure: 1
● With crack slot truckle: 4 ● Box dimension: 470*560*260mm
● Base place size: 450×480mm ● Groove spacing: 25mm
● Pneumatic basic control circuit experiment, ●Single acting cylinder reversing circuit,
● Single acting cylinder automatic control, ●Double acting cylinder reversing circuit,
● Double acting cylinder automatic control, ●Single acting cylinder speed control circuit,
● Relay control technical application ●Double acting cylinder one-way speed regulation circuit,
● Other comprehensiveness, expansibility ●Double acting cylinder both-way speed regulation circuit,
experiment type pneumatic circuit. ●Speed changing-over circuit,
●Buffering circuit,
●Overload protection circuit,
●Interlocking circuit,
●Single cylinder single reciprocating control circuit,
●Single cylinder continuous reciprocating action circuit,
●Multi cylinder sequence action circuit
●Double-cylinder synchronization action circuit,
●Unloading circuit,
……
Air Condition Refrigeration Training Series

67
DLZL-GR01 Refrigeration Cycle Unit
● Power supply: single-phase 220V + 10%, 50Hz, 16A;
● The size of the test bench (mm): 1280 (length)x 700 (width)x 1650 (height);
● Test bench body: movable steel bench with four casters (two with brakes and two without brakes).
● Familiar with refrigeration cycle components;
● Familiar with basic refrigeration principle, understand the importance of throttling device in refrigeration
system.
● Observing and touching the external pipeline to observe the state change of refrigerant. The pressure
changes of refrigerant along the pipeline are read by pressure gauge, and the values of voltmeter
and ammeter are checked.
● Digital temperature readings on fan coil units and condensed air outlet indicators;
● The influence of throttling device on refrigeration was studied.
Air Condition Refrigeration Training Series

68
DLZL-DR02 Basic Refrigeration Training Device
● Power supply: single-phase 220V + 10%, 50Hz, 16A;
● The size of the test bench (mm): 1280 (long)x 700 (wide)x 1650 (high);
● Test bench body: movable steel bench with four casters (two with brakes and two without brakes).
● Familiar with the components of the refrigeration cycle
● Familiar with the basic refrigeration principle and understand the importance of the throttling device in the
refrigeration system
● Observe the state change of the refrigerant by observing and touching the external pipe. Read the pressure
change of the refrigerant along the pipeline through the pressure gauge, and check the values of the
voltmeter and ammeter
● Digital temperature readings on the fan coil and condensing air outlet indicator
● Study the effects of throttling devices in refrigeration
PLC Training Series

69
■ Overview
The system uses computer simulation modern information technology, through
the operation, analogue, simulation three training levels, solves the disjointed
problems of professional training theory, experiment, practice and practical
application.
PLC Training Series

70
● Experiment table dimension:1800×800×1662mm (length×width×height) ；
● Working environment: Temperature: -10 ℃ ± 40 ℃ Relative humidity: <85% (25 ℃ )
● Power supply: Input Power: Single phase 110V ± 10% 50/60HZ;
Output Power: Single phase 110V ± 10% 50HZ/60HZ; DC 24V, 3A; Installed capacity: <250VA;
● Power control: with overvoltage protection, under voltage protection, over current protection, leakage
protection and other functions;
● Motor reversing control experiment
● Motor star delta starter control experiment
● Control experiment simulated traffic light
● Seven segment digital tube experiment
● Robotic handling control experiment
● Liquid mixed control experiment
● Automatic Feeding loading control experiment
● Control experiment mail sorting
● Light sky tower of control experiment
● Responder control experiment
Innovative Industrial Automatic Control Technology Training Series

71
DLGK-SIMND Industrial Automatic Network Integrated Training System
● Input power: three-phase five-wire ~ 380V ± 10% 50HZ
● Leakage protection: I △ n ≤ 30mA, t ≤ 0.1S ● 380 V three-phase five-wire output power
● 24 V DC power output, 0 ~ 10V analog signal source
● Accident emergency stop button, power indicator, power indication
● Off-power misuse power protection ● AC voltmeter, AC voltmeter to measure
● DC voltmeter, DC ammeter to measure
● The working environment: temperature -10 ℃ ~ +40 ℃ Relative humidity <85% (25 ℃ ) altitude <4000M
● Installed capacity: <1kVA ● Dimension: 1800 * 700 * 1760mm
● Designing comprehensive training network and systematic experiment projects
● S7-400PLC programming and communication training
● PC VINCC configuration software basic programming exercises
● PC remote machine to read and write PLC experiment
● MPI communications network experiment
● PROFIBUS communication network experiment
● 9 Industrial Ethernet using training
● USS protocol communications network experiment
……
Process Control Training Series

72
DLGK-53A Basic Process Control Training System
● Installed capacity: AC <10KVA
● Security: leakage protection (operating current ≤ 30mA), over-current protection, fuse protection
● Structures and systems awareness of training device
● Experimental knowledge of the sensor
● The cognitive use of perform device
● Solenoid valve cognitive experiments
● Electric control valve experiment ,ect.
● Sensor installation measurement skills training
● Detection of pressure transmitter
● Detection of turbine flow meter, ect .
● Automatic control skills training
● Level set point control
● Pipeline pressure set point control
● Pipeline flow set point control, etc .

73
DLGK-53B Plane Type Process Control Training System
● Input voltage: three-phase five-wire 380V±5% 50HZ
● Work environment: temperature range of -5 ~ 40 ℃
● Installed capacity: AC <10KVA
● Security: leakage protection (operating current ≤ 30mA), over current protection, fuse protection
● Ambient temperature: -10℃ ~40℃
● Relative humidity: ≤ 90% (25℃ )
● Dimensions: length * width * height = 1950×700×1500mm
● Understanding the process control system components experiments:
● Understanding of the process control and detection device consisting of Boardwalk structure, composition
and control system connected to the experimental program.
● Intelligent adjustment operation and parameter setting instruments, Smart meter transmitter and other smart
meter.
● Calibration of the sensor (zero and span adjustments migration)
● Object properties testing laboratories
● Single-tolerance test experimental tank level mathematical model
● Dual tank water testing laboratories mathematical model
● Boiler tank temperature characteristic testing laboratories
● Single-loop control system experiment
……

74
DLGK-JD3 Advanced Process Control Training System
● Input voltage: single-phase three-wire 220V ± 10% 50HZ
● Installed capacity: AC <2500VA
● Security: leakage protection (operating current ≤ 30mA), overcurrent protection, fuse protection
● DC power supply:. DC24V Power <5A
● Control cabinet dimensions: length × width × height = 1340×700×1650mm
● Process Control Unit Dimensions: length × width × height =1650×800×1850mm
● Understanding and using of the training system
● Application of PROFINET
● Application of brightness control module
● Experiment of first stage single bottom water tank objective characteristic testing
● Experiment of second stage double containers bottom water tank objective characteristic testing
● Two stepping control experiment of boiler linner tank
● PID setting experiment of first stage water tank level
● PID setting experiment of second stage double-capacity bottom water tank level
● PID setting experiment of boiler liner water temperature
……

75
DLPLC-MP Mixing Process Control Training System (PLC Application)
● Input power: single-phase three-wire AC220V ± 10% 50Hz Operating Power: DC24V 3A
● Ambient temperature: -10 ℃ ~ 40 ℃ Humidity: ≤ 90% (25 ℃ )
● Dimensions: 1400X600X1850mm (length × width × height)
● The whole capacity: ≤ 1.5KVA
● PLC I / O points Switch input Points: 13 Switch output Points: 10
● PLC programming methods and applications
● Understanding and application of the solenoid valve
● Understanding and application of the mixing motor
● Understanding and application level sensor
● Stirring, detection control applications of two liquids
● Integrated application of liquid mixing, ect .
Process Control Training series

76
DLLY-HYGS462 Constant Pressure Water Supply Training System
● Through the adjust open and stop the pump group number and frequency control of motorspeed pump speed
to control network hydraulic, stable supply pressure.
● Regulation accuracy: ±0.01Mpa.
● Pipe network hydraulic as control target, achieve high efficiency and energy saving water supply.
● With 24 hours cycle, according to different water consumption can be set on the section water supply
pressure, PLC automatic operation according to the set value.
Time setting pressure:
5:00---8:30 0.6MPa 11:00---13:00 0.6MPa 17:00---23:00 0.6MPa
8:30---11:00 0.5MPa 13:00---17:00 0.5MPa 23:00---5:00 0.42MPa
● constant pressure water supply training set pump unit are soft start work.
● Control panel structure understanding and debugging
● Single pump control variable frequency constant pressure water supply
● Double pump switching frequency constant pressure water supply
● Life water system static pressure control ● Life water system dynamic pressure control
● Life water system time-shared control ● Night dormancy mode water supply
● Fire state control
● Frequency conversion open loop speed control based on PLC analog control
● Converter closed loop speed control based on PLC analog mode

77
DLPCS-YL101 Pressure Control Training System
■ Technical Parameters
● Input power: single phase three wire AC220V±10% 50Hz, operate power: DC24V 3A
● Temperature: -10℃～ 40℃ , humidity: ≤ 90%（25℃）
● Total capacity: ≤ 1.5KVA
● Electrical logic: NPN or PNP
● Process control unit dimension: 1200*600*1400mm
● PLC I/O points:
Switch input points: 5 (DC24V)
Switch output points: 6 (DC24V)
Analog input points:2 (current type/voltage type)
Analog output points:1 (current type/voltage type)
● PLC programming methods and application ● Touch screen cognition and application
● Inverter cognition and application ● PLC module and inverter comprehensive application
● PLC module, touch screen and inverter comprehensive application
● Safety valve cognition and application ● Pressure PID control cognition and training
● Through the system training, the students can master blow skills:
● Process control application ● Mechanical assembly application
● How to choose electronic components ● Various sensor application
……
78
■ Overview
DLPLC-YLJC1 Temperature Pressure Detecting Training System
● Input power: 24V DC
● Working Condition:-10℃～40℃
● Training platform
Training platform uses special mold profiles, by anodic oxidation spraying process, it has scientific structure
and beautiful shape. The base has the regulator to keep stable; The shelve uses aluminum alloy structure
(surface electrophoresis processing); Device uses the custom open mold safety test wire and connectors,
more than the United States military MIL standard and international IEC standard. Hand touch does not
get an electric shock.
● Know the constitution of control system.
● Master the rules of simple process control.
● Understand and use the pressure transmitter.
● Understand and use the flow transmitter.
Process Control Training series

79
DLGK-373 Process Control Comprehensive Experiment System
● Input voltage: single-phase three-wire 110V ± 10% 60Hz
● Installed capacity: AC <3500VA
● Security: leakage protection (operating current ≤ 30mA), over current protection, fuse protection
● DC power supply:24V DC Power <5A
● Dimensions: length × width × height = 1500×800×1800mm
●Training of how to use the equipment ●How to use control panel
●How to use power supply module ●How to use intelligent instrument module
●How to use PLC module ●Training of frequency converter
●Training of intelligent instruments
●Training of PLC
●Training of DCS, ect.
80
Mechatronics, Industrial
Robot Training Series
Mechatronics Training Series, Industrial Robot Training Series
Integrated Solutions for Industrial Robots

81
Mobile robot series

82
DLRB-MR519 Mobile Robot
● Equipment working voltage: 12V3000mah NiMH lithium battery
● Temperature: -10℃ ~ 50℃ ; ambient humidity: ≤ 90% (25℃ )
● Part type: 5 categories
● The number of parts: more than 100
● Commissioning site size: 4000mm*2000mm
● The practice of robot control science, through the mobile robot training equipment, can design and complete
the motion control of various robots according to the needs, such as: straight walking, in-situ rotation, path
planning, motion control and planning.
● The application of various motor and motor control components mainly includes the configuration of DC motor
with encoder, 180°standard servo motor, continuous rotary servo motor and matching motor drive module.
● A variety of sensor applications, such as: ultrasonic ranging sensor, infrared ranging sensor, magnetic sensor,
QTI sensor.
……
Mechatronics Training Series（FA Series）

83
■ Modular
construction
This series product
models are all from
the actual factory
production line, select
the typical structure
contracted,the system
Manipulator module ： Belt transmission module: Handling module:
uses modular design,
Consist of X-axis,Y-axis Composed of DC motor Composed of the rotating
the modules can
andpneumatic finger,which andthe belt, gear,which cylinder, axis cylinder and
be freely combined
mainly used to grab used totransport vacuum suction,which used
according to users'
workpieces. workpieces. to transport the workpiece.
requirement.
Distribution Processing Assembly module: simulate

module:Commonly used modules:Simulate the assembly,fit,compress,
in the first station of the machining process of the pushout and other work
mechatronic system,to workpiece. process of the two different
feedmaterials to the system. workpiece.
Transmission Rotary machining module: Storage module: Three

module:Composed of the for machining or testing column,three lines workpiece
swing cylinders and workpiece sequentially. placement area for the
vacuum suction, used to workpiece classification and
carry workpiece. storage.
Mechatronics Training Series

84
■ Multiple
control modes
This series
can support
three kinds of
control modes
Computer control
(PLC control, MCU control
This control allows the PLC control
MCU control or Internal system is eqipped
user to use 3D simulation Reserve PLC interface
PC control) to with MCU board, MCU has
shows the mechanical according to requirement
complete control been downloaded into the
hardware system structure, users can choose different
of the whole chip before out of factory,
edit control device flow brands or models of PLC
system running. and users can write their
by a simple instruction . to control the system. Just
switch to the own program and download.
we can test theoretical connect the test line with the
corresponding if needs MCU to control,
issues through the virtual interface to
control by simply turn the switch to
environment, before complete PLC control.
turning the appropriate location.
operating real equipment,
switch.
using computer 3D model to
simulate the operation of the
device.
Assembly Module ：Simulate two different parts for Digital teaching resources based on
assembling, interest teaching and game driven
cooperating, pressing and rolling and other work processes.
Mechatronics Training Series（FA Series）

85
PLC PC MCU AIR ■ Technical Parameter

4mm cable pneumatic
● Working voltage: single phase, AC220V
● Temperature: -10℃～ 40℃ ；
Humidity ：≤ 90%（25℃）
● Capacity: ≤ 1KVA
● Dimension: 760*450*1366mm
● Installation and debug of pneumatic system
● Installation and debug of sensor system
● Electric control circuit installation and PLC
programming
● MCU programming
● GRAF language procedure programming
● PC debug
● Installation and debug of electromechanical
equipment ；
● Installation and debug of automatic control system
DLFA-5DPR-A Five Axes Manipulator Training System
● Working voltage: DC24V;
PLC PC MCU 4mm cable
AIR ● Temperature: -10℃～ 40℃ ; environmental
pneumatic
humidity: ≤ 90%(25℃ );
● Capacity: ≤ 1KVA;
● Dimension: 760x580x1366 (height adjustment
10mm) mm
● Set up pneumatic system and debug project.
● Set up sensor system and debug project.
● Set up pneumatic control circuit and write PLC
programming project.
● SCM programming project.
● GRAF language programming project.
● PC machine debugging project.
● Set up electromechanical equipment and debug
project.
● Set up automatically control system and debug
project.
DLFA-5DPR-B Five Axes Manipulator Training System

86
DLFA-DT33 Three Layers of Elevator Training System
● Working pressure:DC24V
● Temperature: -10℃～ 40℃ ；Humidity: ≤ 90%（25℃）；
● Total capacity: ≤ 1KVA
● Open and close control experiment
● Second floors inside choose up and down ,open close control experiment.
● Third floors inside choose up and down control experiment
● Third floors outer call up and down, open and close control experiment.
● Third floors elevator comprehensive control experiment
● PLC control experiment
● MCU control experiment
● PC software control experiment
Mechatronics Training Series（FA series）

87
● Input power:AC220V 60Hz
PLC AIR ● Output power: DC 24V
3mm cable pneumatic
● Temprature: 0 ～ 55℃
● Operation pressure: 0.4 ～ 0.6Mpa
● Signal type: PNP
● System fault diagnosis and maintenance
● The application of detection switch
● Basic electricity pneumatic control
● Relay control circuit
● Electrical self locked circuit
● Electricity pneumatic system
● Electrical sequence control circuit
● The digital quantity input and output
● Motor and transmission system
● Various sensor test system
● PLC programming experiment
● Integrated operation experiment
DLFA-MAS-S Factory Automation Manufacturing
Automation System
● AC power: Single phase AC220V±5% 50Hz;
PLC PC MCU 2mm cable ● Power input ：24V DC power
● Temperature ：-10℃～ 40℃ ；
humidity ：≤ 90%（25℃）；
● Capacity ：≤ 1KVA ；
● Driver ：DC motor ；
● Training platform ：Using special mold profiles,
anodized coating processing, scientific structure,
elegent appearance, the bottom regulator, height
adjustable, to ensure flatness; the bracket adopt
aluminum structure (surface electrophoresis).。
● Stereo garage size ：L1470×W700×H1600
● The stereo parking garage working principle and
training ；
● The carrier cognition training ；
● The parking space judgment cognition training ；
● DC motor control principle training ；
● Storage car single step control training ；
DLFA-LCK2 Three-dimensional Parking Training System ……

88
AIR
pneumatic
DLFA-BJJ03 Auto Marking Machine Training System
● Working voltage: DC24V;
● Temperature: -10℃～ 40℃ ; environmental humidity: ≤ 90%(25℃ )
● Capacity: ≤ 1KVA;
● Dimension: 960x600x1250mm
● MCU control operation step
● PLC control operation step
● Software programming
● Distribution wiring according to control requirements and determined I/O.
● Write the PLC application program according to the control requirements and the determined I/O allocation.
● Complete the connection between PLC and the external circuit of the training device
● Make experiments according to the steps in the control requirements and observe whether they meet the
control requirements.

89
AIR
pneumatic ● Input power: AC 220V, working pressure: DC 24V
● Temperature:-10~40℃
● Safety protection: short circuit protection, terminal
short circuit protection.
● Electric logic: NPN
● Memory board: three line, three column
● Drive: Spindle drive
● Workpiece: column with pallet
● Dimension: 1200*750*750mm
● ASRS formation
● Assembling and demounting of mechanical and
electrical parts
● System fault diagnosis and maintance
● Drawing electric circuit diagram
● Application of sensor
● 2-axises,3-dimensional control system
● Position control system
DLFA-ASRSB02 Automatic Storage and Retrieval System(Basic) ……
● Power input:AC 220V,working voltage:DC 24V
PLC AIR
pneumatic ● Weight:60kgs
● Desk height:750mm
● Main power:AC 220V
● Operating voltage:DC24V,3A
● Operating compressed air:5-6bar.
● Electric logic:PNP or NPN
● Storage platform:4 line 5 column
● Drive :spindle drive
● Worpiece:column with pallet
● Assembling and demounting of mechanical and
electrical parts
● System fault diagnosis and maintance
● Drawing electric circuit diagram
● Application of detective switch
● Ball-screw application
DLFA-ASRSA01 Automatic Storage and Retrieval ● 2-axises,3-dimensional control system
System(Advanced) ……

90
● Power supply: main circuit AC220V,
PLC AIR
pneumatic
control loop DC24V
● Gas source: 0.4Mpa ~ 0.6Mpa
● Working environment: -10 ~ 40 ℃
● Dimensions: 1200 * 750 * 600 mm
● Total capacity: ≤ 1KVA
● PLC basic instruction Contact
● Automatic control experiments of frequency
converter
● Frequency converter function parameter
settings
● Integrated Control
● Electrical, mechanical parts assembly and
disassembly
● PLC programming experiment
● Touch screen communication training
● Action Programming steel loading process
……
DLFA-SFW Steel Feed and Rolling Machine Training System
PLC AIR ● Input power: AC220V±10%（single-phase
2mm cable pneumatic
three-wire）
● Capacity: <1KVA
● Environment temperature: -10℃～ 40℃
● Weight: 27kgs
● Electrical logic ：NPN
● Drive motor ：DC gear reducer motor
……
● The proximity sensors and reeds switch
features
● Mechanical parts and pneumatic part
assembly and disassembly
● Drawing electrical circuit diagram
● Draw pneumatic principle diagram
DLFA-PCT Position Control Training System ● The application of the test switch
……

91
PLC AIR ■ Technical parameter

2mm cable 4mm cable pneumatic
● Temperature:-10℃～ 40℃
● Humidity ：≤ 90%（25℃）
● Pump capacity: Single-phaseAC220V
● Air flow:9L Discharge pressure:0.6~0.8MPa
● Work pressure:0.6MPa
● 1500*750*1150mm
● Automatic detection technology training;
● Pneumatic technology training;
● Stepper motor control applications training;
● Variable frequency drive technology application
training
● Mechanical systems installation and commissioning
of training;
● System maintenance and fault detection training;
● Stepper motor direction control;
● Stepper motor speed control;
DLFA-555D Optical Mechatronic Training System ……
PLC AIR ■ Technical parameter

● AC power: Single-phase :AC220V±10%

50Hz/60Hz
● Temperature:-10℃～ 40℃
● Humidity ：≤ 90%（25℃）
● Dimension:1500×750×1250mm（D×W×H）
● Pump capacity: Single-phaseAC220V
● Air flow:9L
● Discharge pressure:0.6~0.8MPa
● Work pressure:0.6MPa
● Dimension:1500*750*1400mm
● Automatic testing techology application training
● Penumatic technology application training
● Stepper motor control applications training
● Servo motor control applications training
● Frequency control drive technology application
DLFA-555F Optical Mechatronic Training System training
……

92
PLC AIR
pneumatic
DLFA-321 PLC Designer Training System
● Dimension:2400*750*1400mm (length*width*height)
● Length of the desk:750mm
● Power supply:AC220V±10%, single phase, three line
● Work pressure:DC24V,3A
● Protection: ground protection, leakage, overload and overvoltage protection.
● Installation and debug of pneumatic system
● Electrical control circuit installation and PLC programming
● processing control circuit installation and PLC programming
● Step motor, DC motor and three-phase motor control training
● PLC and converter communication control training
● PLC and touch screen communication training
● Electromechanical equipment installation and debug
● Auto control system installation and debug
● Assemble and adjustment of mechanical components
● Installation and debug of electromechanical equipment
● Circuit installation, ect.

93
PLC 2mm cable
AIR
pneumatic
4mm cable
DLDS-565A Optical Mechatronics Training System
● AC power: Single-phase :AC220V±10% 50Hz/60Hz ● Temperature:-10℃～ 40℃
● Humidity ：≤ 90%（25℃） ● Dimension:1882×900×1600mm（D×W×H）
● Pump capacity: Single-phase AC220V 0.37KVA Air flow:10L Discharge pressure:0.6~0.8MPa
● Work pressure:0.6MPa ● Net weight:150kg
● Installation of pneumatic direction control circuit
● Installation of pneumatic speed control circuit
● Installation of swing control circuit
● Installation of pneumatic sequence control circuit
● Installation of manipulator devices
● Connection and control programming of 3 phase asynchronous motor positive and negative reversing
control circuit
● Connection and control programming of 3 phase asynchronous motor speed regulation control circuit
● Servo motor position control and debugging Installation and commissioning of pneumatic system, ect

94
PLC AIR
DLMCS-585MS2 Optical Mechatronics Training System
● AC power: Three-phase five wire　AC380V±10% 50Hz/60Hz ；
● Temperature: -10℃～ 40℃ ; environment humidity: ≤ 90%（25℃）;
● Dimension: about 1900mm*900mm*1220mm (length*width*height);
● Installation and commissioning of automated production line equipment
● Forward and reverse experiment of V20 inverter control motor
● Online multi-speed control of V20 inverter and S7-1200 PLC
● Installation and use of Siemens PLC programming software TIA Botu
● Installation and use of touch screen software
● Servo motor control and parameter setting
● PLC and touch screen communication experiment
● Operation of the servo motor with external terminals
● Mechanical installation and adjustment of the feeding station
● Mechanical installation and adjustment of the processing station and programming
● Mechanical installation and adjustment of the handling station and programming
● Mechanical installation and adjustment of the assembly station
● Mechanical installation and adjustment of the sorting storage station and preparation of the program
Modular Flexible Manufacturing Training System

95
PLC AIR
pneumatic
DLMPS-205 Modular Flexible Production Line Training System
● Electrical control cabinet main circuit power supply: Single phase AC220V±10% 50Hz;
● Electrical control cabinet control circuit power supply:DC24V
● Temperature:-10℃～ 40℃ ；Humidity: ≤ 90%（25℃）；
● Dimension: 450mm×770mm×1100mm
● Air source pressure:0.4~0.6Mpa
● PLC S7-1200
● Application of detecting switch
● Application of various sensors
● Application of hydraulic and pneumatic components
● Application of PLC
● Application of auto storage management
● Application of two dimension fixed point fetch
● Pneumatic circuit wiring and electrical wring
● Assemble and disassemble of mechanical and pneumatic parts
● System fault diagnosis and maintains

96
PLC 3mm cable

AIR
pneumatic
DLDS-500A Modular Flexible Production Line Training System
● Main power supply of the control cabinet:Single phase AC220V±10% 50Hz/60Hz;
● Power supply of control cabinet circuit:DC24V
● Temperature :-10℃～ 40℃ ; Humidity: ≤ 90%（25℃）；
● Dimension of each station:Length×Width×Height =500mm×790mm×1200mm
● air pressure: 0.4~0.6Mpa
● The application of detection switch
● The application of variety of sensors
● The application of pneumatic components
● PLC application
● Applications of ASRS
● The application of the two-dimensional fixed-point extract
● The pneumatic circuit tube and electrical connection
● The assembly and disassembly of mechanical parts and pneumatic parts
● Touch screen technology
● Point-to-point transmission and reception of data
……

97
PLC AIR
pneumatic
DLMPS-800A Modular Product System
● Input power: single phase 220V±10% 50Hz or 60 Hz
● Leakage protection: I △ n ≤ 30mA, t ≤ 0.1S
● AC power AC220V
● DC output power 24V
● Emergency stop button, power indicator, power supply indicator
● Protection when supplying power by mistake after break
● Working environment: temperature -10℃ ~+40℃ relative humidity:<85%(25℃ ) Height <4000M
● Installed capacity: 1kVA~5KVA
● Operation compressed air: 5-6bar
● Cognition and application of pneumatic technology
● Cognition and application of sensor technology
● Cognition and application of mechanical transmission technology
● Principle of industrial automation technology and application
● Cognition and application of FMS8000 modular production line
● Dynamic real-time monitoring
● Study of PLC and programming language of PC controller
● PLC programming language
……

98
PLC AIR
pneumatic
DLMPS-600A Modular Flexible Production Line Training System
● Electrical control box main circuit supply power: Single AC220V±10% 50Hz;
● Electrical control box circuit supply power: DC24V
● Temperature:-10℃～ 40℃ ；Humidity: ≤ 90%（25℃）
● Dimension: (L) 450*(W)760*(H)1103mm
● Source gas pressure: 0.4~0.6Mpa
● Unit capacity ≤ 1KVA
● Host controlled by Simens S7-1200 Series
● Application of deceting switch
● Application of various sensors
● Application of pneumatic components
● PLC application
● Application of Automatic storage management
● Application of two dimension fixed point take things
● Pneumatic circuit connector and electrical wire
● Loading and unloading of mechanical and pneumatic parts.
● System fault diagnosis and maintainance
● Detection of material and colors.
DLMPS-600D Modular Product System
……
Flexible Manufacturing Training System

99
PLC AIR
pneumatic
DLWL-800A Modular Modern Logistics Manufacture Process System
● Input power:single-phase ～ 220V±10% 50HZ
● Leakage protection:I △ n ≤ 30mA, t ≤ 0.1S
● AC220V AC power
● 24V DC power output
● Emergency stop button
● Power-off error protection
● Working environment:tempreature -10℃～ +40℃ Relative humidity 35% ～ 65%(25℃ ) altitude <4000M
● Capacity: ≤ 5kVA
● Operation air pressure:5 ～ 6bar Working pressure: 0.4 － 0.6 MPA
● Single station dimension: ① 980x750x1500mm ② 600x750x1500mm ；table height:750mm
Overall dimension:6100x1730x1500mm
● Manipulator transportation system unit ● Visual inspection system unit
·Complete cylinder inching control training ·Complete visual identificationsystem working
·Complete cylinder projecting, retracting control training principle training
·Complete container feeding training ·Complete swap focal length training
·Complete goods feeding training ·Complete dimming training
·Complete servo motor cognition training,ect ·Complete sensors trigger signal training
·Complete capture process training
……
Industrial Robot Training Series(RB Series)

100
PLC PC MCU AIR

pneumatic
3mm cable
DLFA-R501DM Electro Robot Arm
● Structure: Union joint type ● Driving Mode: step motor
● Load Capacity:1KG ● Max Expansion Radius: ≥ 700mm
● Height: ≥ 1150mm ● Operating Mode: PLC Programming Contro
● MCU Programming Control ● Computer Software Programmin
● Power Capacity: Single-phase220V 50Hz 4A ● Temperature: -10℃～ 40℃
● Environmental Humility: ≤ 90%（25℃） ● Overall Capacity: ≤ 1KVA
● Cognition and application of sensor
● Cognition and application of pneumatic
● Mechanical integration and debugging technology
● Serial-link robot teaching experiment
● Manual control experiment
● PLC programming control experiment
● MCU programming control experiment
● Mechanical ontology modules can make the disassemble and assemble experiment
● Cognition and wiring experiment of electrical components
● Multi-control programming transformation and operation experiment

101
PLC PC MCU AIR

3mm cable pneumatic
DLFA-R601DM Modular Serial Robot Arm
● Power input: AC 220V±10%, 50Hz ● Robot size: 800mm×780mm×850mm
● Control system dimension: 1400mm×780mm×1400mm ● Robot joint modules specs:
　　　　　　　　Name Structure Angle range

joint 1 Drive by stepper motor, transmit by planetary gear －９０°～＋９０°
joint 2 Drive by servo motor, transmit by harmonic reducer －４５°～＋４５°
joint 3 Drive by stepper motor，transmit by belt reduction drive －４５°～＋４５°
　　 joint 4 Drive by stepper motor，transmit by worm gear －９０°～＋９０°
　　　　joint 5 Drive by stepper motor，transmit by straight gear reducer and belt －４５°～＋４５°
　　　　joint 6 Drive by micro stepper motor, transmit by bevel gear transmission －１８０～＋１８０°
● Sensor cognition and application ● Pneumatic knowledge cognition and application
● Mechanical alignment and commissioning technology ● Serial Robot training
● Manual control experiment ● PLC program control experiment
● Motion card control experiment
● Single module independent operation experiment
● Module mechanical structure assemble& disassemble experiment
● Pneumatic control components cognition and wiring experiment
● Multi-control mode convert programming and operation experiment

102
DLRB-120 Industrial Robot Basic Skills Training System
● Output power: single phase three wires AC220V±10％ 50HZ
● working environment: temperature -10℃－ +40℃ ,relative humidity <85％（25℃）,no condensation of
● water droplets altitude <4000m
● Power control :automatic pneumatic switch power supply with protection of overvoltage, under voltage,
overflow ,and leakage protection.
● Outline dimension:1500mm×1200mm×1700mm
● Robot body and controller's installation and wiring ● Robot's initialization and parameters recovery
● The I/O communication between robot and PLC ● The wiring between robot and I/O
● Robot's stacking application installation and wiring
● The clamp option and design of robot's stacking application
● The programming and debugging of robot's stacking application
● Robot's handling application installation and wiring
● The clamp option and design of robot's handling application
● The programming and debugging of robot's handling application
● The programming and debugging of robot's geometric locus
● The application installation and wiring of industrial robot's detection and arrangement
● The fixture option and design of industrial robot's detection and arrangement application
● The programming and debugging of industrial robot's detection and debugging application
● The comprehensive application and design between robot and its peripheral equipments

103
DLRB-120B Industrial Robot Basic Skills Training System
● Output power: single phase three wires AC220V±10％ 50HZ
● Working environment ：temperature -10℃－ +40℃，relative humidity <85％（25℃）
，no condensation of
water droplets altitude <4000m
● Power control ：Automatic pneumatic switch power supply with protection of overvoltage, under voltage,
over-flow ,and leakage protection.
● Dimension ：1500mm×800mm×1500mm
● Output Voltage
Single phase AC 220V±10％ 50HZ, startup switch control output, with fuse protection
DC stabilized power supply: 24V/1A
● Robot body and controller's installation and wiring ● Robot's initialization and parameters recovery
● The I/O communication between robot and PLC ● The wiring between robot and I/O
● Robot's stacking application installation and wiring
● The clamp option and design of robot's stacking application
● The programming and debugging of robot's stacking application
● Robot's handling application installation and wiring ● Positional repeatability ：0.01 mm
● The clamp option and design of robot's handling application
● The programming and debugging of robot's handling application
● The programming and debugging of robot's geometric locus
……

104
AIR
PLC pneumatic
DLFA-JXS Four Joints Robot Training System
● Input power: three-phase five-wire 380V ± 10% 50HZ/60Hz
● Working environment: temperature -10 ℃ - +40 ℃ , relative humidity <85% (25 ℃ ), no water beads condensation
altitude <4000m
● Power control: automatic air switch off power, with overvoltage protection, undervoltage protection, overcurrent
protection, leakage protection system.
● Output power:
(1) Output controlled by the start switch and is protected
(2) DC power supply: 24V / 5A.
● CNC lathe: Full-function slant CNC lathe machine
● Robot: ABB IRB1410
Industrial robot learning and training CNC lathe learning and training
● Basic Principles and Constitution of Industrial Robot ● Machine principle learning
● Cognition of Industrial Robot structure ● CNC machine operation and programming
● Cognition of Industrial robot electrical part ● Hydraulic and pneumatic control loop installation
● Industrial robot software cognition and debugging
● Industrial robot controller cognition
● Six-degree-of-freedom robot joint motion control
learning and training
……

105
AIR ● Number of robot axes: 6 axes
pneumatic
● Scalable to 8 axes
● Max. load of the robot: 5 kg;
● Max. working radius of the robot arm:
1.44m;
● Repeat positioning accuracy: 0.025mm;
● Three-phase AC: 400V (+10%, -15%),
50Hz, 7.68KVA
● Ambient temperature: 5℃- 45℃
● Relative humidity: 95%
Noise level: <70dB weight:225 kg
Two-axis positioner for option.
● Understand the main components and
working principle of welding robots;
● Understand the supporting facilities
around the welding robot;
DLRB-1410W Welding Robot Training System ● Operational exercises for robot welding;
……
AIR ● Robot axis number: 4 axis
pneumatic
● Maximum load: 110 kg;

● Maximum working radius of robot
arm: 2.4m;
● Repetitive positioning accuracy:0.05mm;
● Maximum power: 3.67KW
● Weight: 925Kg
● Relative humidity: 95%
● Noise level: <73dB
● Basic Principles and Basic Composition
of Industrial Robots
● The basic structure of the ABB robot and
the direct trajectory of each axis
● Cognition of ABB Robot Simulation
DLRB-460 Palletizing Robot Training System Software

● Basic Operation of ABB Robot Teach
Pendant
……

106
PLC AIR
pneumatic
DLRB-932 Industrial Robot Typical Workstation Training System
● Input power: single-phase three-wire AC220V ± 10% 50HZ,
● Working environment: Temperature -10 ℃ - + 40 ℃ , relative humidity <85% (25 ℃ ), no condensation
Altitude <4000m
● Power control: automatic air switch on/off power supply, overvoltage protection, under-voltage protection,
over-current protection, leakage protection system.
● Output Power:
·Single-phase AC 220V ± 10% 50HZ; control output by start switch, and fuse protection.
·DC stabilized power supply: 24V / 1A,
● Dimensions:
● Industrial robot: ABB IRB120
● Installation and wiring of the industrial robot body and controller;
● Industrial robot initialization and parameter recovery;
● IO communication between industrial robots and PLCs;
● Industrial robot palletizing application installation and wiring;
● Selection and design of industrial robot palletizing application fixtures;
● Industrial robot palletizing application programming and debugging;
……

107
AIR
pneumatic
DLRB-1410B Robot Machine Loading and Unloading Training System
● Input power: three-phase four-wire 380V ± 10% 50HZ/60Hz
● Working environment: temperature-10 ℃ - +40 ℃ , relative humidity <85% (25 ℃ ), no water beads
condensation altitude <4000m
● Output power:
·Three-phase four-wire 380V ± 10% 50HZ.
·DC power supply: 24V / 5A,
● CNC lathe: universal slant bed CNC lathe machine
● Robot: ABB IRB1410
● Basic Principles and Constitution of Industrial Robots ● Cognition of Industrial Robot Ontology
● Industrial robot electrical part cognition ● Industrial Robot Controller Cognition
● Learning and training of Six – axis Robot Joint Motion Control
● Learning and training of Linear Motion Trajectory Control of Six-axis industrial robot
● Learning and training of circular motion trajectory of Six-axis industrial robot
● Learning and Training Acceleration / Deceleration Constraint Control of Six-axis industrial robot
……

108
AIR
pneumatic
DLRB-2600 Robot Polishing Training System
● 3 phase 4 wire :380V±10% 50HZworking environment ：temperature -10℃－ +40℃，
relative humidity <85％（25℃）
，
● Altitude <4000m
● Power supply control ：automatic air switch，has over-voltage protection、under
● Voltage protection、over-current protection、leakage protection system.
● Output power ：3 phase 4 wire 380V±10% 50HZ DC regulated power supply ：24V/5A，
Robot ：ABB IRB2600
● The basic principles and structure training of industrial robots
● Understanding industrial robot structure ● Understanding the electrical part of industrial robots
● Understanding Industrial robot controller ● Robot programming training
● Learning and training of joint motion control of six DOF robot
● Linear trajectory control training of six DOF robot
● Circular arc trajectory control training of six DOF robot
● Acceleration and deceleration control training of six DOF robot
● Basic operation of robot control training
● Principle and structure training of grinding and polishing componentsApplied
● Robot programming trainingTechnology of grinding and polishing
● Robot programming trainingFixture design of polishing and polishing table

109
DLRB-1410A Industrial Robot CNC Machining Teaching Workstation
● Input power: three-phase five-wire 380V ± 10% 50HZ/60Hz
● Working environment: temperature -10 ℃ - +40 ℃ , relative humidity <85% (25 ℃ ), no water beads
condensation altitude <4000m
● Output power: (1) Output controlled by the start switch and is protected; (2) DC power supply: 24V / 5A.
● CNC lathe: Full-function slant CNC lathe machine ● Robot: ABB IRB1410
● Industrial robot learning and training ● CNC lathe learning and training
· Basic Principles and Constitution of Industrial Robot ·Machine principle learning
· Cognition of Industrial Robot structure ·CNC machine operation and programming
· Cognition of Industrial robot electrical part ·Hydraulic and pneumatic control loop installation
· Industrial robot software cognition and debugging
· Industrial robot controller cognition
· Six-degree-of-freedom robot joint motion control
learning and training
· Six-degree-of-freedom robot circular motion track
control learning and training
· Typical Application of Robots - Parts assembly application example
· Robot maintenance training

110
DLDS-3512 Industrial Robot Skills Training System
● Input power: single-phase three-wire AC220V±10% 50HZ,
● Working environment: temperature -10 °C - +40 °C, Relative humidity <85% (25 °C), altitude <4000m
● Output power: DC regulated power supply: 24V/3A.
● Equipment size:
·operation platform:1700*1000*1600 (L*W*H)
·operation platform: 1700*950*1200 (L*W*H)
● Safety protection function: short circuit protection, overload protection, emergency stop protection, etc.
● Touch screen: 7 inches
● Six-joint industrial robot
● Fingertip gyro press-fit production task based on robot automatic loading and unloading
● Numeric keypad automatic assembly task
● Wireless mouse production task based on dual robot cooperation
● Workpiece automatic grinding task
● Robot automatic gift wrapping task
● Multi-variety material transfer and palletizing tasks
● Bookmark automatic sorting task
● Assembly and commissioning of mechanical structure of raw material library unit
● Understanding and application of six-axis robots
……

111
DLDS-3717 Industrial Robot Skills Training System
● Input power: single-phase three-wire AC220V±10% 50HZ,

● Working environment: temperature -10 °C - +40 °C, Relative humidity <85% (25 °C), altitude <4000m
● Output power: DC regulated power supply: 24V/3A.
● Equipment size:
·operation platform:1700*1000*1600 (L*W*H)
·operation platform: 1700*950*1200 (L*W*H)
● Safety protection function: short circuit protection, overload protection, emergency stop protection, etc.
● Touch screen: 7 inches
● Six-joint industrial robot
● Fingertip gyro press-fit production task based on robot automatic loading and unloading
● Numeric keypad automatic assembly task ● Workpiece automatic grinding task
● Wireless mouse production task based on dual robot cooperation
● Robot automatic gift wrapping task ● Bookmark automatic sorting task
● Multi-variety material transfer and palletizing tasks
● Assembly and commissioning of mechanical structure of raw material library unit Appraisable knowledge and
skill points
● Bookmark automatic sorting taskUnderstanding and application of six-axis robots
……

112
PLC AIR
pneumatic
DLRB-934 Industrial Robot Typical Workstation Training System
● Input power: single-phase three-wire AC220V ± 10% 50HZ,
● Working environment: Temperature -10 ℃ - + 40 ℃ , relative humidity <85% (25 ℃ ), no condensation
Altitude <4000m
● Power control: automatic air switch on/off power supply, overvoltage protection, under-voltage protection,
over-current protection, leakage protection system.
● Output Power:
·Single-phase AC 220V ± 10% 50HZ; control output by start switch, and fuse protection.
·DC stabilized power supply: 24V / 1A,
● Dimensions: 1300mm × 750mm × 1700mm
● Industrial robot body and controller installation wiring;
● Industrial robots and initialization parameters recovery;
● Industrial robots and PLC IO communication;
● Industrial robots IO wiring;
● Industrial robots palletizing application installation and wiring;
● Application of industrial robots palletizing fixture selection and design;
● Industrial robots palletizing application programming and debugging;
● Industrial robots glue application installation and wiring;
……

113
DLDS-1508 Industrial Robot Technology Application Training System
● Input power: single phase 3-line AC220V±10％ 50HZ，

● Working environment: temperature -10℃—+40℃, relative humidity <85% (25℃), no condensation of water
droplets at the altitude <4000m
● Output power:DC regulated voltage power: 24V/3A.
● Equipment dimension: 1700*1000*1600 mm(L*W*H)
● Safety protection function: emergency stop button, safety curtain.
● PLC: 24I/O ● Touch screen:7" ● Six axis industrial robot: ● Four axis industrial robot
● Raw material warehouse unit mechanical structure assembly and debugging training
● Four-axis industrial robot trace planning
● Ring assembly inspection unit mechanical structure assembly and debugging training
● Ring assembly detection unit motion control program preration
● Visual inspection device mechanical structure assembly and debugging training
● Visual inspection device electrical debugging
● Six-axis industrial robot installation
● Installation of the drawing device
● Six-axis robot offline trace planning training and calibration
● Six-axis robot offline programming
● Application of various sensors, ect

114
DLRB-CIM01 Robot Integrated Manufacturing and Processing System
● AC power: single-phase AC220V ± 10% 50Hz
● Temperature: -10 ℃ ~ 40 ℃; environmental humidity: ≤ 90% (25 ℃)
● Dimensions: 2810mm × 1500mm × 2100mm (length × width × height)
● The whole capacity: ≤ 3KVA
● The control system: Siemens S7-1200 series PLC
● Industrial robots: MZ04
● Sensor adjustment training
● Air connection and commissioning training
● Robot grasp workpiece programming training
● Integrated programming debugging training
● CNC machine debugging and principles
● CNC integrated test bench connection and debugging training
● CNC system interface awareness and connection
● Sensor selection and application
● CNC machine electrical control system design principles
● CNC machine programming and simulation processing
● CNC program structure, format and command system understanding
● CNC machine tool programming and operation processing training
● CNC machine system function skills application

115
DLDS-500AR Modular Flexible Product Line System Training System
● Electric control cabinet main circuit power supply: single phase AC220V ± 10%, 50Hz
● Electric control cabinet control loop power supply: DC24V
● Temperature: -10℃ ~ ℃ ; ambient humidity: ≤ 90% (25 ℃ ;
● The overall dimensions are not less than: 2400*790*1390mm (L*W*H).
● Single station size: Feeding unit: Dimensions: 450*790*1030mm (L*W*H)
● Handling unit: Dimensions: 1050*790*1400mm (L*W*H)
● Assembly unit: Dimensions: 450*790*1170mm (L*W*H)
● Industrial robot palletizing unit: Dimensions: 900*790*1390mm (L*W*H)
● Air source pressure: 0.4~0.6Mpa ● Machine capacity: ≤ 5KVA
……
● Robot awareness ● Wireless communication between stations
● Detection switch, sensor, pneumatic components, PLC application
● Application of industrial robots ● System troubleshooting and maintenance
● Application of touch screen technology ● Cross-site data transfer
● Ethernet bus technology (Siemens series) ● Application of configuration software
● Analog input and output control technology ● Feeding unit training
● Flexible Manufacturing System PLC Programming and Debugging
● Feeding unit training ● Handling unit training
……

116
PLC AIR
pneumatic
DLRB-900A Modular Flexible Production Line Training System
● Electric control cabinet main circuit power supply: single phase AC220V ±10% 50Hz.
● Electric control cabinet control circuit power suppliy: DC24V
● Temperature ：-10℃～ 40℃ ; environment humidity ：≤ 90%（25℃）；
● Overall dimension: 750mm×750mm×1000mm
● Air pressure: 0.4~0.6Mpa
● Whole machine capacity: ≤ 1KVA
● Hose unit use Siemens S7-1200 PLC
● HMI system: SIMATIC MP 177 6 "TOUCH PANEL MULTI W.5,7" TFT DISPLAY, 2 MB Configuring MEMORY,
Configurable WITH FLEXIBLE 2008 STANDARD OR HIGHER Win CC.
● The application of the test switch ● The application of various sensors
● The application of Pneumatic and hydraulic components
● PLC application ● The application of automatic warehouse management
● The application of two dimension designated take things
● Pneumatic circuit wiring and electrical wiring ● System fault diagnosis and maintenance
● Assembly and disassembly of mechanical parts and pneumatic part
● Ethernet communication between stations connected（between PLC S7-1200 host station and slave
stations）

117
PLC AIR
pneumatic
DLRB-600A Flexible Production Line Training System
● Input power: Single phase 220V±10% 50Hz
● Protection against leakage: I △ n ≤ 30mA, t ≤ 0.1S
● Power supply: AC220V ● Output power:24V DC
● Temperature: -10℃～ +40℃ ; relative humidity: 35% ～ 65%(25℃ )Height<4000M
● Capacity: ≤ 2kVA ● Operating compressed air: 5 ～ 6bar
● Dimension of each station: 750×750×1620mm, height:810mm;
● Complete the magnetic sensor adjustment training ● Complete the fiber optic sensor adjustment training
● Complete the pressure detection adjustment training;
● Complete cylinder speed governing training ● Completed cylinder control training;
● Complete the tilt cylinder control training; ● Complete block automatic feeding training
● Complete magnetic sensor adjustment training
● Complete material detection sensor (combination) adjustment training
● Complete workpiece height detection sensor (combination) Adjust the training
● Complete cylinder speed governing training ● Complete cylinder control training
● Complete motor control training ● Complete red workpiece detection training,ect
● Complete magnetic sensor adjustment training
……
118
PLC AIR
pneumatic
DLRB-600B Flexible Production Line Training System
● Input power: Single phase 220V ± 10% 50Hz/60Hz
● Power supply: AC220V
● Output power:24V DC
● Temperature: -10℃～ +40℃ ; relative humidity: 35% ～ 65%(25℃ )Height<4000M
● Operating compressed air: 5 ～ 6bar
● Dimension of each station: 750×750×1620mm, height:810mm;
■ Training Projetcs
● Siemens 1200 software installation training;
● To complete Siemens 1200 software programming hardware configuration training
● To complete Siemens 1200 software programming training
● Completion of the ETHERNET network training;
● To complete the training of the network address settings;
● Complete the magnetic sensor adjustment training
● Complete the fiber optic sensor adjustment training
● Complete the pressure detection adjustment training;
● Complete cylinder speed governing training
……

119
PLC AIR
pneumatic
DLRB-1601 Flexible Manufacture System
● Input power: Single phase 220V±10% 50Hz
● Power supply: AC220V
● Output power:24V DC
● Temperature: -10℃～ +40℃ ; relative humidity: 35% ～ 65%(25℃ ),Height<4000M
● Operating compressed air: 5 ～ 6bar
● Dimension of each station: 750×750×1620mm, height:810mm; Total dimension: 8000x4250x1620mm
● Practice installation of TIA Siemens S7-1200 software installation training
● Complete the hardware configuration training of TIA Siemens S7-1200 software programming
● Complete of TIA Siemens S7-1200 software programming training
● Practice on the installation of PC configuration software
● Practice on the configuration software practical training
● Complete the magnetic sensor adjustment training
● Complete the fiber optic sensor adjustment training
● Complete the pressure detection adjustment training
……

120
PLC AIR
pneumatic
DLRB-501 Flexible Manufacturing System
● Input power ：three-phase four-wire 380V±10% 50-60HZ ● Leakage circuit ：I △ n ≤ 30mA, t ≤ 0.1S
● Control power ：DC24V ● Emergency stop button, power indicator, supply indicator
● Power-off error protection
● Working environment ：temperature -10℃～ +40℃ relative humidity 35% ～ 65%(25℃ )altitude<4000M
● Capacity ：≤ 5kVA ● Air pressure range0.4 ～ 0.6Mpa
● Size ：3200X3600X2200mm，desk height:750mm
● Practice STEP7 Siemens 300software installation training;
● Complete STEP7 Siemens 300 software programming hardware configuration Training
● Complete STEP7 Siemens 300 software program training;
● Practice WINCC software installation training;
● Complete communication between STEP7 and WINCC training;
● Complete PROFIBUS-DP network training;
● Complete magnetic sensor adjustment training;
● Complete photoelectric sensor adjustment training;
● Complete cylinder speed adjustment training;
● Complete cylinder control training;
……

121
PLC AIR
pneumatic
DLRB-801 Flexible Manufacturing System
● Input power: tree-phase four-wire 380V±10% 50Hz
● Leakage circuit protection ：I △ n ≤ 30mA, t ≤ 0.1S ● Control power ：DC24V
● Emergency stop button, power indicator, supply indicator
● Protection for Power-off and power-on by mistake
● Working ambient: temperature -10℃～ +40℃ ,relative humidity 35% ～ 65%(25℃ ), altitude<4000m
● Capacity ：≤ 5kVA ● Air pressure: 0.4 ～ 0.6Mpa
● Outline dimension:7500X5000X2000mm, height of operation platform: 750mm
■ Training Projects:
● Material storage unit ● Master control loop transmission unit
● Industrial robot unit ● CNC lathe unit & CNC milling machine unit
● CNC system configuration, connection and debugging training
● Manual programming and simulation processing training
● Robot assembly unit
● Image detection unit
● RFID system unit

122
DLIM-102MA Internet Collaborative Manufacturing Technology and Application Production Training System
● Working power: AC220V ± 10%, 50HZ. Six-axis industrial robots:
● Dimensions:12000mmX5000mmX2200mm（LxWxH） ● Axis: maximum operating range:±170;
● Working environment: temperature -10℃ - +40℃ , Maximum speed: 450°/ S
● Relative humidity <85% (25℃ ). ● Axis: maximum range of motion:-135 ~ +80°;
● Safety protection device: emergency stop button. Maximum speed: 380° / S
● PLC: Siemens S7-1200 series. ● Axis: maximum operating range:-136 ~ +270°;
Four-axis industrial robots: Maximum speed: 520° / S
● Axis: arm length: 225mm; Rotation range: ± 132℃ ; ● Axis: maximum operating range:±190;
● Repeat accuracy: ± 0.01mm Maximum speed: 550°/ S
● Axis: arm length: 175mm; Rotation range: ± 141℃ ; ……
● Repeat accuracy: ± 0.01mm ……
● Communication between the PLC and the remote
I/O module;
● Modbus-Tcp Communicates between PLC and
industrial robot
● Profinet communication between PLC and RFID
● Wireless communication between PLC and AGV trolley
……

123
DLRB-501D Industrial robot candy packaging and handling system
● Working power: three-phase five-wire 380V±5% 50HZ
● Safety protection: leakage protection, overcurrent protection, fuse protection
● Robot parameters: six-axis, parallel industrial robot
● Ambient temperature: -10 ℃ ~ 50℃
● Installation and wiring of the six-axis industrial robot body and controller.
● Six-axis industrial robot initialization and parameter recovery.
● IO communication between six-axis industrial robot and PLC.
● Six-axis industrial robot IO wiring.
● Installation and wiring of six-axis industrial robots.
● Programming and debugging of six-axis industrial robots.
● Installation and wiring of the parallel industrial robot body and controller.
● Parallel industrial robot initialization and parameter recovery.
● IO communication between parallel industrial robots and PLC.
● Parallel industrial robot IO wiring.
● Installation and wiring of parallel industrial robots.
……
Virtual Simulation Training System (RB Series)

124
DLsoft-robotarm Robot Virtual Disassembly Training Simulation System
■ Overview
DLsoft-robotarm Robot virtual disassembly training simulation system simulates the disassembly and assembly
of industrial robot mechanism structure using a combination of 3D technology and interactive animation. Through
the 3D simulation of robots dismantling training, each axis can be disassembled into independent parts online, so
that students can master the composition of industrial robots, robot structure analysis, robot motor installation,
RV reducer, harmonic reducer installation , Mechanical lubrication, routine maintenance and other robot
maintenance tips.
■ Smart disassembly assistant
Teachers can use this function as teaching demonstration, and students use this function to study independently.

Untitled

Uploaded by

Copyright:

Available Formats

Untitled

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Untitled

Uploaded by

Copyright:

Available Formats

Shandong Dolang Technology & Equipment Co., Ltd.

Dolang follows the technical standards of the WorldSkills

Gold Member of Worlddidac Association

International College-Enterprise Corporation

David Hoey, CEO of Worldskills Competition Visited Dolang Exhibition Stand

2015 International University-Enterprise Cooperation Docking Dialogue

2016 China Skills Competition National Selection

2017 China International

Dolang Attended Worlddidac Asia.

The Ministry of UAE Visited Dolang Booth in GESS Dubai 2017.

2016 Chinese Skills Competition - “Dolang-Everte Cup”

National Industrial Robot Technology Skills Competition

Bulid the competition platform, select the skilled personnel,

Dolang Cooperates With ABB to Build Laboratories for Vocational Education.

Electrical and Electronic

Electrical Maintenance Skill Training Series

DLWD-ETBE12D730M Electrical Skill Training Set

Electrical Maintenance Skill Training Series

Electrical Maintenance Skill Training Series

Electrical Maintenance Skill Training Series

DLDS-1214F Electrical Installation Training System

Electrical Maintenance Skill Training Series

Other variant products of the same series:

Electrical Maintenance Skill Training Series

DLWD-ETBE12D-II Advanced Electrical Maintenance Skill Training&Assessment Series

Electrical Maintenance Skill Training Series

DLWD-DJB02 Motor & Transformer Maintenance & Test Training System

Electrical Maintenance Skill Training Series

DLDC-DJ01 Motor Training System

Electrical Maintenance Skill Training Series

DLWD-DJ22-M Induction Machine Training System

Electrical Maintenance Skill Training Series

DLWD-DJ21Motor and transformer training system

Electrical Maintenance Skill Training Series

DLWD-DJSX-T Synchronous Motor Training System

Electrical Maintenance Skill Training Series

DLWD-DJ05 Electric Machine Training System

Electrical Maintenance Skill Training Series

DLWD-ETBEZMXT Electrical Installation Training System (in module)

Electrical Maintenance Skill Training Series

DLWD-ETBE12D-B Basic Electric Training System

Electrical Maintenance Skill Training Series

DLWD-ETBE12D-L Primary Electrical Lighting Skills Assessment Training Device

Electrical Maintenance Skill Training Series

DLWD-ETBE-G04 Industrial Circuit Skills Training Assessment Device

● Electrical control training

Electrical Maintenance Skill Training Series

DLWD-ZD1200/6 Low and Middle Voltage Simulation Training System

Electrical Maintenance Skill Training Series

DLWD-XD35A Modern electrician skills training assessment system

Machine Tools Maintenance Training Series (Model-type)

Power Supply Training Assessment Series

DLWD-5A I Low-voltage Power Supply & Distribution Assessment Training System

Electronic Training Series

DLDZ-165E Electronic Circuit Training Equipment

Electronic Training Series

DLDS-WXD12 Radio Debugging Work Skills Training Examination Identification System

Electronic Training Series

DLDZ-DLDZ03 Power Electronic Technology and Automation Control Training System

Electronic Training Series