Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    Wall Footing Akjain p512 Old Book

    Uploaded by

    Shuvam Pyakurel
    This document provides calculations to design the footing of a masonry wall. It specifies the wall load, soil bearing capacity, concrete and steel strengths. It then calculates the approximate footing area, weight and required width as 2m. The factored load is determined to be 150 KN/m. The critical bending moment and required tensile steel area are also calculated. Finally, the shear capacity is checked and found to be safe.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Wall Footing Akjain p512 Old Book

    Uploaded by

    Shuvam Pyakurel
    28 views2 pages
    This document provides calculations to design the footing of a masonry wall. It specifies the wall load, soil bearing capacity, concrete and steel strengths. It then calculates the approximate footing area, weight and required width as 2m. The factored load is determined to be 150 KN/m. The critical bending moment and required tensile steel area are also calculated. Finally, the shear capacity is checked and found to be safe.

    Original Title

    wall footing akjain p512 old book

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides calculations to design the footing of a masonry wall. It specifies the wall load, soil bearing capacity, concrete and steel strengths. It then calculates the approximate footing area, weight and required width as 2m. The factored load is determined to be 150 KN/m. The critical bending moment and required tensile steel area are also calculated. Finally, the shear capacity is checked and found to be safe.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    28 views2 pages

    Wall Footing Akjain p512 Old Book

    Uploaded by

    Shuvam Pyakurel
    This document provides calculations to design the footing of a masonry wall. It specifies the wall load, soil bearing capacity, concrete and steel strengths. It then calculates the approximate footing area, weight and required width as 2m. The factored load is determined to be 150 KN/m. The critical bending moment and required tensile steel area are also calculated. Finally, the shear capacity is checked and found to be safe.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    Wall footing

    Wall load 100 KN/m


    Bearing capacity of soil 60 KN/m2
    Unit weight of earth 15 KN/m3
    fck of concrete 15 N/mm2
    fy of steel 250 N/mm2
    load factor 1.5
    thickness of wall 400 mm

    Distance of base of footing below ground level 500 mm


    Approx. area of footing required 1.67 m per m length 65.62
    Approx. weight of footing including earth above it 12.5 KN/m
    Total weight on soil 120 KN/m edit formula by removing 7.5
    Actual width of footing required= 2m 78.744
    Provide width of footing 6.57 ft 2.00244 m

    Applying load factor


    wu 150 KN/m
    Net soil pressure acting upward 74.9087 KN/m2

    Critical section for BM in masonry wall footing occurs half way between
    the middle and the edge of the wall
    Projection 0.901 m
    BM 30.4203 KNm per m length
    Depth from BM d 117.059 mm Use 0.133 fort M20
    Adopt overall D D 300 mm
    cover 30 mm
    Effective Depth 250 mm
    Tensile Steel required Ast 582.038 mm2
    Provide 10dia at 4" c/c b/w 785 mm2

    Check one way shear


    Critical section for shear is at distance d away from the face of the wall
    Projection 0.801 m
    Vu 41.29 KN per m length
    Tv 0.165 N/mm2
    Pencentage of tensile steel 0.31 %
    Design Shear strength Tc 0.39 N/mm2
    Hence Safe in shear
    in

    ula by removing 7.5 INPUT


    in Factored Bending Moment Mu= 30.42026 KNm
    Characteristic Strength of concrete f ck= 15 N/mm2
    Yield Strength of rebar Fy= 250 N/mm2
    Effective Depth d= 250 mm
    Width b= 1000 mm

    OUTPUT
    a = fy/fckb = 0.016667 mm-1
    b = -d = -250 mm

    c=Mu*10^6/0.87*fy= 139863.3 mm

    x1 = 582.0376 mm2

    x2 = 14417.96 mm2

    Ast= 582.0376 mm2

    You might also like