Tesda Circular: Issued

,.
TESDA CIRCULAR
SUBJECT: Implementing Guidelines on the Reviewed Page 1 of pages
Training Regulations(2017 backwards) on
Tools, Equipment and Materials (TEM), Number 055 series of 2021
Training Facilities (TF) and Trainer's
Qualifications (TQ) for 75 Qualifications
Date Issued: I Effectivity: Supersedes:
16 June 2021 Immediately
In the interest of service and to ensure the acceptance and utilization of the
Training Regulations (TRs) by the concerned industry sector, TVET institutions, and
general public for the effective and efficient implementation of the TVET
programs, the following Implementing Guidelines are hereby issued:
I. BACKGROUND/RATIONALE
A. TESDA Board Resolution No. 2021-13 dated 11 May 2021 on

"Approving The Amendments of Tools, Equipment and Materials
(TEM), Training Facilities (TF) and Trainers' Qualifications (TQ) of the
Seventy-Five (75) Training Regulations Under Various Sectors" was
issued.
8. It is the policy of TESDA to review the Training Regulations (TRs)

promulgated by the TESDA Board after three (3) years of promulgation.
C. On 03 March 2020, during Stakeholder's Dialogue (Luzon Cluster), one of

the concerns/issues raised therein is the obsolete tools, equipment,
supplies, and materials prescribed in some Training Regulations.
D. One of the findings raised during the Orientation/Calibration of Inspection

Team from NISP, IIIAS, Regional and Provincial UTPRAS, and
Compliance Audits Focals in the Conduct of Inspection, Evaluation of
Program Registration Documents and Audits on 26-28 January 2021 was
the timely update of the TRs such as in Tools, Equipment and Materials
are already outdated, that significantly affect the TVl's compliance with the
requirements.
E. On 17 February 2021, the Qualifications and Standards Office (QSO)

facilitated the Consultation Workshop with Industry Associations
representatives/experts/practitioners and other relevant stakeholders. The
workshop's output was a proposed/amended updated tools, equipment
and materials (TEM), training facilities (TF), and trainers' qualifications
(TQ).
F. On 19 and 29 of March 2021, the Technical Vocational School Association

(TVSA) conducted the review of TRs with updated TEM, TF and TQ
endorsed the Qualifications and Standards Office (QSO) for 75
qualifications.
G. TVSA submitted their output with twenty-seven (27) TRs reviewed on 07

April 2021.
.. '
J,
TESDA CIRCULAR
SUBJECT: Implementing Guidelines on the Reviewed Page i of pages
Tools, Equipment and Materials (TEM), Number D55 series of 2021
Qualifications {TQ) for 75 Qualifications
Date Issued: I
Effectivity: Supersedes:
II. OBJECTIVE
This guideline shall serve as basis for program re-registration application under
UTPRAS and delivery of TVET programs and services of the seventy-five (75)
existing Training Regulations with outdated tools, equipment and materials,
training facilities, and trainers' qualifications.
Ill. SCOPE / COVERAGE
New and existing training programs registered under the reviewed seventy-five
(75) Training Regulations (TRs) shall be covered by this Circular.
IV. PROGRAM REGISTRATION
1. TVls which existing registered programs affected by the amended list of

tools, equipment, materials, facilities, trainer's qualification should
undergo re-registration/migration of their programs. Re
registration/migration to the seventy-five (75) reviewed Training
Regulations shall commence within a period of one year upon
deployment of this Circular.
2. Registration of new programs shall comply to the amended list of tools,

equipment, materials, facilities, trainer's qualification of the 75 reviewed
Training Regulations.
3. The attached, as seen in Annex A, list of Training Regulations, which has

obsolete tools, equipment and materials (TEM), training facilities (TF),
and trainers' qualifications (TQ), shall be deemed amended and given the
current advancement in technology, the latest TEM, TF and TQ shall be
considered by the operating units in the program registration, and
assessment and certification.
4. To provide more flexibility in the implementation of training programs, a

list of alternative tools, equipment, and materials that serve equivalent
functions shall be provided as an Annotation to the list of TEM of the 75
reviewed TRs. Subject to the availability of such TEM in the local market
and consideration of community practices, the annotation shall apply.
5. All Regional/Provincial/District Directors are hereby instructed to process

the application for Program Registration within the allowable Process
Cycle Time (PCT) indicated in the Operating Procedure on Program
Registration or existing guidelines, through face-to-face or online
,,
TESDA CIRCULAR
SUBJECT: Implementing Guidelines on the Reviewed Page of pages
Tools, Equipment and Materials (TEM}, Number 055 series of 2021
Qualifications (TQ) for 75 Qualifications
Date Issued: I Effectivity: Supersedes:
modalities.
IV. MONITORING AND FEEDBACK SYSTEM
1. The Regional and Provincial/District Offices (ROPO/DO) shall closely

monitor the implementation of the registered programs under these TRs;
and
2. The ROPO/DO shall require the education and training providers with the
registered program under these TRs to report the enrolled, graduates and
employed in the T2MIS as part of the regular monitoring and feedback
system.
V. EFFECTIVITY
This Circular shall take effect as indicated and shall supersede all other
issuances inconsistent hereof. Wide dissemination of this Circular by all
concerned is hereby enjoined.
�.µ�
SEC. ISIDRO S LAPENA, PhD, CSEE
Director Genera t
TESOA-OP.QS0-01-F08
Rev.No.0112105/17
Republic of the Philippines

TECH ICAL IDUCATION AND SKILLS DEVELOPMENT AUTHORITY
E t Service Road, South Luzon Expressway, Taguig City
1211" TEIDA IOARD MEETING

11 May 2021, Tuesday, 9:00 a.m.
leconference Vea Zoom Ptatfonn
RNolutlon No. 2021 •

(Page 1 of 8 pages)
APPROVING THE AMENDMENTS OF TOOLS, EQUIPMENT AND

MATERIALS (TEM), TRAINING FACIUTiucn:, AND TRAINERS'
QUALIFICATION8 (TQ) OF THE EVENTY.PIVE (71) TRAINING REGULATIONS
UNDER VARIOUS SECTORS
WHEREAS, Section 14 (b) of Republic Act No. n98 mandates that TESOA
shall develop and eslablilh a national system of lkllla standardization, testing, and
certification nd conduct research and development on various occupational areas
to recommend policies, rules, and regulations for effective and efficient skills
standardization, tasting and cetti6cation system·n the country;
WHEREAS, TESDA Board, as the nat11t>na1 policy-making body of TESDA,

· ues Board Resolutions to approve and promulgate Training Regulations (TR)
and A8888Sment Fees to serve the minmum standards and requirements in the
implementation of · ing programs;
WHEREAS, it is the policy of TESOA to review the Training Regulations (TR)

promulgated by the TESDA Board after three (3) years of promulgation;
WHEREAS, given the recent developmel1ls i1 technology and current trends

in the skills training, there is a pressing need to review the existing Training
Regulations which provide for obsolete tools and equipment, training facilities and
trainers' qualification ;
WHEREAS, during the Stakeholder's Dialogue (Luzon Cluster) on 03 March

2020, one of the eoneemaflSSues raised therein is the obsolete tools, equipment,
supplies, nd ma1erials prescribed in some Training Regulations;
WHEREAS, the Q ifications and Standards Office (QSO) reviewed the

existing Training Regulations on various programs and recommended the omnibus
amendments of the said Training Regulations, which prescribe the outdated tools,
equipment. nd materials, training facilities, and trainers' qualifications;
WHERIAI, before the approval of the Omnibus Amendments of the Tool ,

Equipment. nd · (TEM), Training Facilities (TF), and Trainers' 0ualifications
TESDA-OP-QS0-01..f08
Rev. No. 0112105117

TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY
East Service Road, South Luzon Expressway, Taguig City
121" TESDA BOARD MEETING

11 May 2021, Tuesday. 9:00 a.m.
Teleconference Via Zoom Platform
Reeolutlon No. 2021 •

(Page 2 of 8 pages)
APPROVING THE AIIENDIIENTS OF TOOLS, EQUIPMENT AND
MATERIALS (TEM). TRAINING FACIUTIES(TF) AND TRAINERS'
QUALIFICATIONS (TQ) OF THE SEVENTY-FIVE (71) TRAINING REGULATIONS
UNDER VARIOUS SECTORS
(TQ), the QSO waa instructed to review with the industry experts/practitioners, notably
-ed
the TRs promulgated in 2017 and backward and toprioritize which are for a fuU review.
WHEREAS, on 17 February 2021. the QSO facilitated the Consultation

Workshop with Industry Associations · · · ners and
other
relevant stakeholders. The workshop's output was a updated
tools, equipment. materials, training faci&tieswand trainers'
qualifications.
WHEREAS, in the 132nd TESDA Boant System Standards Setting
1a-
Development Convnittae (TB - SSSDC) held on 16 March 2021, the QSO
presented the List of TRs for Review, including the reviewed obsolete Tools,
Equipment, Materials (TEM), Tra· ing Facilities (TF), and Trainers' Qualifications
(TQ). As noted,
out of 306 Promulgated TRs, 217 a,e for review, of which 75 TRs
have reviewed TEM, TF, and TQ and the remaining of which will be scheduled for
review within the year,
WHEREAS, in the same rneetilag, it was agreed by the SSSDC that same
list of TRs for Review wiU be subject for consultation by 1Vls before the Resolution
of the TESOA Board;
WHEREAS, on 19 and 29 of March 2021, 1he Technical Vocational Schools'

Association (lVSA) conducted the review of TRs with updated TEM, TF and TQ
endorsed by the QSO and submitted their output with twenty-seven (27) TRs reviewed
on 07 April 2021;
WHEl,tlAS, to provide more flexibility in the implementation of training

programs, list of alternative tools, equipment and materials which serve
equivalent functions shall be provided as an Annotation to the list of TEM. Subject to
availability of such TEM in the local market and in consideration of community
practices, the annotation shaH apply.
t
TESOA-OP-QS0-01-F08
Rev.No.011 17

East Service Road, South Luzon Expressway, Taguig City
121"' TESDA BOARD MEETING

11 May 2021, Tuesday, 9:00 a.m.
TeleconferenceVaa Zoom Platform
RNolutlon No. 2021 • .&

(Page 3 of 6 pages)
APPROVING THE AMENDMENTS OF TOOLS, EQUIPMENT ANO
MATERIALS (TEM), TRAI NG FACIUTIES(TF) AND TRAINERS'
QUALIFICATIONS (TQ) OF THE SEVENTY-FIVE (75) TRAINING
REGULATIONS UNDER VARIOUS SECTORS
WHEREAS, during the 133rd Standards Setting and Systems Development

Comm (SSSDC) Meeting held on 08 April 2021, the Committee deliberated
upon and.agreed tot vorably recommend the appro of the proposed TEM, TF,
and TQ of the 75 training regulation under variou sector, which is attached as
Annex "A" and seNeS a an integral part otth· Resolution;
WHEREA , afterward, such TRs are to be prioritized according to the

criteria set forth by the TESDA Seaetariat concemed, which are to be subjected to
a more compreh nsive review following the TR Development /Review process;
0 , THEREFORE, BE IT RESOLVED, AS IT HEREBY RESOLVED, that

the TESDA Board in its meeting today, 11 May 2021 at 9:00 a.m. has approved
and promulgated the aforementioned omnibus amendments of the seventy-five
existing Training Regulations with outdated tools, equipment and materials, training
facilities, and trainers' qualifications, which appears in Annex A, as herein
appended.
BE IT RESOLVED FINALLY, that

(1).Copi of th. Resolution and the omnibus amaldrnents of the existing
Training Regulations with outdated tools, equipment and materials be
published in the Official Gazette or in a newspaper of general circulation, and
disseminated to all concerned, nd the same be effective fifteen (15) days
upon publication;
(2) The attached list of Training Regulations which has obso te tools,
equipment and materials, training facilities nd trainer9' qualifications shall
be deemed amended and in view of the current advancement in the
technology, the latest tools, equ pment and materials. training facilities and
trainers' qualifications be deemed considered by the operating units in the
program registration,
and aasessment and certification;
'
TESDA-OP..QS0,-01-F08
Rev. No. 01 12105/17

TECH AL EDUCATION AND SKILLS DEYILOPIIENT AUTHORITY
East Service Road, South Luzon Expresaway, Taguig City
12tt" TEIDA BOARD MEETING

11 May 2021, Tuesday, 9;00 a.m.
Ti leconference V• Zoom
Platform
Raeolutlon No. 2021 •

(Page 4 of 6 pages)
APPROVING THE AIIENDIIENTI OF TOOLS, EQUIPMENT AND MATERIALS

(TEii), TRA111111NO FACIUTIEl(TF) AND TRAINERS' QUALIFICATIONS (TQ)
OF THE EVENTY.PIVE (71) TRAINING REGULATIONS UNDER VARIOU&
SECTORS
(3) All program• regilteted under the current seventy-five identified

qualification, mu comply with the requnmenta of the lbovementioned
Training Regu · . The one-year period of re-nlQlltnltion under
Training Regu ·ona U commence on the d of effectivity indicated in
the lmpleme ·ng Guidelinee/TESDA Circular for the deployment of the
amended T ning Regulations to be isslat by the TESOA Secretariat; nd
(4) Gradu of TVET programs covered by the aforementioned Training

Regulations be required to undergo mandatol y assessment under the
national assessment and certification program.
Approved this 11th day of May 2021.
ATTY. MARtC.,,,1.-_ - D. DE GUZMAN

ActingSecretary .
Attested by:
EC. I It NA. PhD., CSEE

Designated Cha rpet'80fl, TESDA Board
o·rector General, TESDA
TESDA-OP-QS0-01-F08
Rev. No. 01 12105117

TECHNICAL EDUCATION AND IKIU.S DEVELOPMENT AUTHORITY
E st Service Road, South Luzon Expressway, Taguig City
121" TESDA BOARD MEETING

11 May 2021, Tuesday, 9:00 a.m.
TeleconferenceVaa Zoom Platform
RMolutlon No. 2021 • il

(Page 5 of 6 pages)
APPROVING THE AIIENDIIENT8 OF TOOLS, EQUIPMENT AND

MATERIALS (TEii), TRAll'IIIIW FACILITIIS(TF) AND TRAINERS'
QUALIFICATIONS (TQ) OF THE SEVENTY-FIVE (71) TRAINING
REGULATIONS UNDER VARIOUS SECTORS
(Original Signed) (Original Signed)

USEC. RAFAELITA M. ALDABA UIEC.ARIELT.CAYANAN
Department of Trade and Industry Department of Agriculture
(Orig" I Signed) (Original Signed)

USEC. EPIIIACO V. DENSING USEC. RENATO U. SOUDUII, JR.
Department of Interior and Local Department of Science and Technology
Government

MR. ISIDRO ANTONIO C. ASPER 11R. RENE LUIS II. TADLE
Board Member, Labor Sector Board Member, Labor Sector

MR. RAMON R. DE LEON IIR. ROGELIO J. CHAVEZ, JR.
Board Member, Labor Secto Board Member, Labor Sector
TESDA-OP..QS0-01-F08
Rev.No.0112105117

East Service Road, South Luzon Expreuway, Taguig City
12"" TESDA BOARD MEETING

11 May2021, TU81day, 9:00a.m.
Teleconference Vta Zoom Platform
RMOlutlon No. 2021 -

(Page 8 of 8 pages)
APPROVING l'HE AMENDMENTS OF TOOLS, EQUIPMENT AND MATERIALS

(TEM), TRAINING FACIUTIEl(TF) AND TRAINERS' QUALIFICATIONS (TQ) OF
THE SEVENTY-FIVE (71) TRAINING REGULATIONI UNDER VARIOUS
SECTORS

DR. LEONIDA BAYANI-ORTIZ PROF.RANDOLPHI.NONATO
Board Member, Employer Sector
Board Member, Employer Sector
· (Original Signed)
(Original Signed)
MS. MARY G. NG IIR. ARTURO II. MILAN
Board Member, Business & lnvesb,N!flt
Board Member, Business & Investment
· Sector
Sector
(Original Signed)
FR. 0 OFRE G. I OCENCIO JR., SOB
Board Member, Education and Training
Sector
ANNEX A
I. LIST OF TRAINING REGULATIONS WITH REVIEWED TOOLS, EQUIPMENT AND MATERIALS, TRAINING
FACILITIES AND TRAINERS QUALIFICATIONS
SECTOR QUALIFICATION
1. Agricultural Crops Production NC I
2. Agroentrepreneurship NC II
3. Agroentrepreneurship NC Ill
4. Agroentrepreneurship NC IV
5. Animal Health Care and Management NC Ill
6. Animal Production (Poultry-Chicken) NC II
7. Animal Production (Swine) NC II
8. Artificial Insemination (Large Ruminants) NC II
9. Drying and Milling Plant Servicing NC Ill
Agricultural, Forestry and Fishery
10. Fishport/Wharf Operation NC I
11. Grains Production NC II
12. Horticulture NC 111
13. Landscape Installation and Maintenance (Softscape) NC II
14. Pest Management (Vegetables) NC II
15. Rice Machinery Operations NC II
16. Seaweeds Production NC II
17. Sugarcane Production NC II
18. Heavy Equipment Servicing (Mechanical) NC 11
19. HEO (Articulated Off-Highway Dump Truck) NC II
20. HEO (Backhoe Loader) NC II
21. HEO (Bulldozer) NC II
22. HEO (Concrete Pump) NC II
23. HEO (Container Stacker) NC II
24. HEO (Motor Grader) NC II
25. HEO (Paver) NC II
26. HEO (Rigid Off-Highway Dump Truck) NC II
Construction
27. HEO (Road Roller) NC II
28. HEO (Transit Mixer) NC II
29. HEO (Wheel Loader) NC II
30. Plumbing NC I
31. Plumbing NC II
32. Plumbing NC Ill
33. Rigging NC I
34. Screed NC I
35. Computer Systems Servicing NC II
Electrical and Electronics
36. Electronics Products Assembly and Servicing NC II
37. Hilot (Wellness Massage) NC II
Human Health/Health Care 38. Massage Therapy NC II
39. Pharmacy Services NC Ill
40. Emergency Medical Services NC 11
41. Cable TV Installation NC II
42. Cable TV Operation and Maintenance NC Ill
43. Telecom OSP and Subscriber Line Installation (Copper
Information and Communication Cable/POTS and DSL) NC 11
Technology
44. Telecom OSP Installation (Fiber Optic Cable) NC II
45. Ship's Catering Services NC I
Maritime
46. Marine Electricity NC II
47. Flux Cored Arc Welding (FCAW) NC I
48. Flux Cored Arc Welding (FCAW) NC 11
49. Flux Cored Arc Welding (FCAW) NC 111
50. Gas Metal Arc Welding (GMAW) NC I
51. Gas Metal Arc Welding (GMAW) NC II
52. Gas Metal Arc Welding (GMAW) NC Ill
Metals and Engineering 53. Gas Tungsten Arc Welding (GTAW) NC II
54. Gas Tungsten Arc Welding (GTAW) NC IV
55. Gas Welding NC I
56. Gas Welding NC II
57. Submerged Arc Welding (SAW) NC I
58. Submerged Arc Welding (SAW) NC 11
59. Slaughtering Operations (Large Animal) NC II
Processed Food and Beverages
60. Slaughtering Operations (Swine) NC II
Social and Other Community 61. Domestic Work NC II
Development 62. Bookkeeping NC Ill
63. Attraction & Theme Parks Operation NC 11
64. Barista NC 11
65. Bartending NC II
66. Cookery NC 11
67. Events Management Services NC Ill
Tourism 68. Food And Beverage Services NC II
69. Front Office Services NC II
70. Housekeeping NC 11
71. Local Guiding Services NC II
72. Tourism Promotion Services NC 11
73. Diesel Power Plant Maintenance NC Ill
Utilities 74. Diesel Power Plant Operation and Maintenance NC II
75. Diesel Power Plant Operation and Maintenance NC Ill
II. A · LIST OF TOOLS, EQUIPMENT AND MATERIALS
Agricultural, Forestry and Fishery (AFF)
Qualification Existing TEM Amended TEM
Agricultural Crops Tools Tools
Production NC I Description Qty Description Qty
bolos 25 PCS bolos 25 pcs
Broomstick 10 pcs Broomstick 10 pcs
Calculator 5 pcs Calculator 5 pcs
Container 5 pcs Container 5 pcs
Cutting tools 5 sets Cutting tools 5 sets
Diooing tools 5 sets Digging tools 5 sets
Drying meter 2 pcs Drying meter 2 PCS
Dulos 10 pcs Dulos 10 pcs
Fruit crate 5 pcs Fruit crate 5 pcs
Harvesting tools 5 sets Harvesting tools 5 sets
Hat 25 pcs Hat 25 pcs
Knapsack sprayer 5 pcs Knapsack sprayer 5 pcs
Knife 5 sets Knife 5 sets
Light hoe 5 pcs Light hoe 5 pcs
Moisture meter 2 pcs Moisture meter 2 pcs
Petri-dish 2 pcs Petri-dish 2 pcs
pH meter 3 pcs pH meter 3 pcs
Pick mattock 5 pcs Pick mattock 5 pcs
Picking knife 5 pcs Picking knife 5 pcs
Plow 1 Plow 1 pc
Plumbing tools 2 sets Plumbing tools 2 sets
Post-Harvest treatment tools 5 sets Post-Harvest treatment tools 5 sets
Protective coat 25 pcs Protective coat 25 pcs
Protective gadgets 25 pcs Protective gadgets 25 pcs
Pruning sheers 5 pcs Pruning sheers 5 pcs
Rake 5 pcs Rake 5 pcs
Scissors 10 pcs Scissors 10 pcs
Seed bed 5 Seed bed 5 pcs
Seedling tray 5 Seedling tray 5 pcs
Shovel 10 Shovel 10 pcs
Sprinklers 15 Sprinklers 15 pcs
Step ladder 2 Step ladder 2 pcs
Storage tools/cabinet 2 Storage tools/cabinet 2 pcs
Transplanting tools 25 pcs Transplanting tools 25 pcs
Trowel 25 pcs Trowel 25 pcs
Equipment Equipment
Description Qty Description Qty
Booth/temporary shed 2 Booth/temporary shed 2 unit
Cart (Kariton & paragus) 5 Cart (Kariton & paragus) 5 units
Comb-tooth harrow 2 Harrow 2 units
Computer 1 Computer 1 unit
Crates 5 Crates 5 units
Drying oven 1 Drying oven 1 unit
Farm/ field 1
Greenhouse/nurser y 1
Harvesting equipment 1 Harvesting equipment 1 unit
Irrigation system (sprinkler, 1 Irrigation system (sprinkler, 1 unit
mist/drip irrigation mist/drip irrigation
Mower (grass cutter) 1 Mower (grass cutter) 1 unit
Overhead projector (OHP) 1 LCD/Smart TV 1 unit
Portable chain saw 1 Portable chain saw 1 unit
Post-Harvest treatment 1 Post-Harvest treatment 1 unit
equipment equipment
Power sprayer 1 Power sprayer 1 unit
Rotavator 1 Rotavator 1 unit
Service vehicle 1 Service vehicle 1 unit
SortinQ equipment 1 Sorting equipment 1 unit
Spike tooth harrow 2 Harrow 2 units
Storage room 1 Storage room 1 unit
Surface irriQation system 1 Surface irriQation system 1 unit
Tractor/Carabao 1 Tractor 1 unit
Typewriter 1 Computer and printer 1 set
TRAINING MATERIALS TRAINING MATERIALS
Brochures 25 Brochures 25 pcs
Instructional supplies & materials 2 Instructional supplies & materials 2 pcs
Visual aids 2 Visual aids 2 pcs
Reference materials/Books 5 Reference materials/Books 5 pcs
(Kinds of Tropical Fruits) (Kinds of Tropical Fruits)
Data (Data on result of soil 5 Data (Data on result of soil 5 pcs
analysis) analysis)
Procedural manuals 5 Procedural manuals 5 pcs
Soil samples analysis 5 Soil samples analysis 5 pcs
Materials Materials
Agri bags, plastic 250 pcs. Agri bags, plastic 250 pcs.
Bamboo stick 500 pcs. Bamboo stick 500 pcs.
Basket 5 pcs. Basket 5 pcs.
Catching nets 5 pcs. CatchinQ nets 5 pcs.
Clips 3 dozen Clips 3 dozen
Coconut dust 5 sacks Coconut dust 5 sacks
Compost 5 sacks Compost 5 sacks
Fertilizers 1 sack Fertilizers 1 sack
First aide supplies/medi cine 1 kit First aide supplies/medi cine 1 kit
Flower inducer 5 bottles Flower inducer 5 bottles
FunQicides 5 bottles Fungicides 5 bottles
Gloves 25 pairs Gloves 25 pairs
Growing media (garden soil, 5 sacks Growing media (garden soil, 5 sacks
sewed sand, compost, soil, sewed sand, compost, soil,
manure and sawdust/rice manure and sawdust/rice
Killing bottles 5 pcs Killing bottles 5 pcs
Marking pens 5 pcs. Marking pens 5 pcs.
Masks 25 pcs. Masks 25 pcs.
Mulching material 5 sacks Mulching material 5 sacks
Hair nets 25 m Hair nets 25 m
Packaging materials, assorted Packaging materials, assorted
Pail 5 Pail 5 pcs
Paper/bond 5 rims Paper/bond 5 rims
Pencil 25 Pencil 25 pcs
Pens 25 Pens 25 pcs
Pesticides/Insecticides 5 bottles Pesticides/Insect icides 5 bottles
Pieces of cloth 5 pieces Pieces of cloth 5 pieces
Plastic bag 100 Plastic bag 100 pcs
Plumbing supplies 1 set Plumbing supplies 1 set
Pots 250 Pots 250 pcs
Propagating media (garden soil, 5 sacks Propagating media (garden soil, 5 sacks
sawdust, sand, composed, sawdust, sand, composed,
coconut coir) coconut coir)
Rice hull 3 sacks Rice hull 3 sacks
Rope, (small, med. Large) 3 rolls Rope, (small, med. Large) 3 rolls
Rubber band 3 boxes Rubber band 3 boxes
Rubber boots 25 pairs Rubber boots 25 pairs
Rubber knots Rubber knots
Sacks 25 sacks Sacks 25
sacks
II. B - TRAINING FACILITIES (TF)
AGRICULTURE, FORESTRY AND FISHERY SECTOR
Qualification : I AGRICULTURAL CROPS PRODUCTION NC I
Existing Amendment
3.5 TRAINING FACILITIES

AGRJCULTURAL CROP PRODUCTION NC I
Based on a class 'zeof 25 students/trainees.
SPACE REQUIREMENT SIZE IN METERS AREA IN SQ. TOTAL AAEA IN
METERS SQ.METERS
A.Buildino(permanent) 170.30
Student/Trainee Working 2.00x 2.00per 4.00per student 100.00
Space student/trainee
LeamingResource 3.00 X 5.00 15.00 15.00
Center No Amendment
Facilities/EquipmenUCirc 39.30
ulation (30% of
teaching
accomroodationl
Store Room 4.00X 4.00 16.00 16.00
B. Experimental Land
Area 5 so m /trainee 125.00 125.00
Note:Experimentalarea willchange acoordingto availabilityof land.
II C - TRAINERS' QUALIFICATION (TQ)

AGRICULTURAL, FORESTRY AND FISHERY SECTOR
Qualification: I AGRICULTURAL CROPS PRODUCTION NC I
Existing Amendment
• TRAINER QUALIFICATION(TQ I) Must be a holder • Must be holder of NTTC Level I (NC 11 and TMC) on
of Agricultural Crops Production NC II or its Agricultural Crops Production NC II
equivalent • Must be computer literate
• Must have undergone training on Training • Must have at least 2 years job/industry experience
Methodology I (TM I)
• Must be computer literate
• Must be physically and mentally fit
• *Must have at least 2 years job/industry experience
• Must be a civil service eligible (for government
position or appropriate professional license issued
by the Professional Regulatory Commission)
* Optional. Only when required by the hiring institution.
II. A - LIST OF TOOLS. EQUIPMENT AND MATERIALS
AGRICULTURAL, FORESTRY AND FISHERY (AFF)
Agroentrepreneurshi Tools Tools
p NC II Description Qty. Description Qty,
Scissor 1 pair Scissor 1 pair
Stapler 1 pc Stapler 1 pc
Puncher 1 pc Puncher 1 pc
Calculators 5 pc Calculators 5 pc
Equipment Equipment
Description Qty. Description Qty.
Portable speaker with microphone 1 set Portable speaker with microphone 1 set
Camera phone 1 unit Camera phone 1 unit
White / Black Board 1 unit White / Black Board 1 unit
LCD & white cloth 1 unit
Computer 1 unit
Materials Materials
Marking pen (permanent) 10 pc Marking pen (permanent) 10 pc
Marking pen (white board)/ chalk 10 pc Marking pen {white board)/ chalk 10 pc
Ballpen 25 pc Ballpen 25 pc
Pencil 25 pc Pencil 25 pc
Notebook 25 pc Notebook 25 pc
Masking tape (1 inch) 5 pc Masking tape (1 inch) 5 pc
Flipchart 1 roll Flipchart 1 roll
Manila paper 100 pc Manila paper 100 pc
Cartolina 25 pc Cartolina 25 pc
Record book 1 pc Record book 1 pc
Bond paper 2 reams Bond paper 2
reams
Staple wire 1 box Staple wire 1 box
Reference materials (manual, 5 pc Reference materials (manual, 5 pc
guide book) guide book)
Crayons (8 pcs/box) 5 box Crayons (8 pcs/box) 5 box
Alcohol 2 bot
(500ml)
Face mask 25 pcs
Face shield 25 pcs
Foot bath 2
pcs
or for
every
door
II. B · TRAINING FACILITIES (TF)
Qualification : I AGROENTREPRENEURSHIP NC II
Existing Amendment
Space Size in Area in Total Grand
3.5 TRAINING FACILITIES Requirement meters Sq. area Total
AGROENTREPRENEIJRSHIPNC II meters
A. Permanent - - - 101.00
Based on a class size of 25 students/trainees
Building
SPACE REQUIREMENT SIZEIN AREA IN TOTAL GRAND TOTAL Lecture 2.00x1.0 2.00/ 50.00
METERS SQ. AREA AREAIN SQ. room/area 0 student
METERS IN SQ. METERS Learning 3.00x5.0 15.00 15.00
METERS
A. Buildingjpennanentl 125.00 resource 0
• StudenVTrainee 2.00 X 1.00per 2.00per 50.00 Store Room 4x4 16.00
Lecture/>Jea student/trainee student
Wash Room 2x1 2.00
• LeamingResource 3.00x5.00 15.00 15.00
Center Rest Room 3x4 12.00
, Adivity Room 30.00
(male,female
includ facilities:
-washroom 2x1 2.00 & pwd)
-storeroom 4x4 16.00 Disinfection/sc
• rest room 3x4 12.00
(male, reenin area 2x3 6.00
female & PWDl infront of main
B.DemoAreat 500.00
TOTAL: 625.00 entrance
Note:•Ar.cess to andusecleqo aclllecsan beprrMled lt'i'001oo1operewe anangements
olMOAwilhoiherpartrler enterpise 11 .
B. Demo Area For urban area 100

For rural area 500
Total 701
II. C - TRAINERS' QUALIFICATION (TQ)

Qualification: I AGROENTREPRENEURSHIP NC II
Existing Amendment
• Must be a holder of NTTC I (NC+ TM1) in
Agroentrepreneurship NC 11 and
No amendment
• Must have at least 2 years job/industry
experience for the last five (5) years
II. A- LIST OF TOOLS, EQUIPMENT AND MATERIALS
Agroentrepreneurship NC Tools Tools
Ill Description Qty Description Qty
Scissor 1 pc Scissor 1 pc
Equipment Equipment
Portable speaker with 1 set Portable speaker with microphone 1 set
microphone
Camera phone 1 unit Smartphone 1 unit
White / Black Board 1 unit White/ Black Board 1 unit
LCD & white cloth 1 set LCD & white cloth 1 set
Computer 1 unit Computer 1 unit
Printer 1 unit Printer 1 unit
Materials Materials
Marking pen (permanent) 25 pc Marking pen (permanent) 25 pc
Marking pen (white 25 pc Marking pen (white board)/ chalk 25 pc
board)/ chalk
Glue 2 pc Glue 2 pc
Bond paper 2 ream Bond paper 2 ream
Meter tape 1 unit Meter tape 1 unit
Printer ink (black & 1 set Printer ink (black & colored) 1 set
colored)
Production inputs (e.g., 5 Production inputs (e.g., seeds, 5 samples
seeds, Fertilizers, sample Fertilizers, chemicals)
chemicals) s
Crayon (8 pcs/box) 5 set Crayon (8 pcs/box) 5 set
Reference materials 5 pc Reference materials (manual, 5 pc
(manual, guide book) guide book)
Alcohol 2 bot
(500 ml)
Face mask 25 pcs
Face shield 25 pcs
Foot bath 2 pcs or for
every door
Qualification : I AGROENTREPRENEURSHIP NC Ill
Existing Amendment
Space Size in Area in Total Grand Total
Requirement meters Sq. area
AGROENTREPRENEURSHIP NC II meters
Building
SPACE REQUIREMENT SIZEIN AREA IN TOTAL GRAND TOTAL Lecture 2.00x1.0 2.00/ 50.00
METERS SQ. AREA IN AREAIN SQ. room/area 0 student
METERS SQ. METERS
METERS Learning 3.00x5.0 15.00 15.00
A. Building(pennanent) 125.00 resource 0
, Student!Trainee 2.00x 1.00 per 2.00per 50.00
Lecture Area student/trainee student Store Room 4x4 16.00
, LeamingResource 3.00x5.00 15.00 15.00 Wash Room 2x1 2.00
Center
, AdivityRoom 30.00 Rest Room 3x4 12.00
indudilg facili·es: (male,female
-washroom 2x1 2.00
•storeroom 4x4 16.00 & pwd)
•
(male,
rest room 3x4 12.00 Disinfection/sc
female & PWD) reenin area 2x3 6.00
B.DemoAreat 500.00 infront of main
TOTAL: 625.00
Note: •Ar.cess to anduse orequf'llentnacilies ca, be r,owled ttroog, cooperawe imngements entrance
of OOA Mil olherpa!ner enterprises/a .
For rural area 500
Total 701

Qualification: I AGROENTREPRENEURSHIP NC Ill
Existing Amendment
• Must be a holder of NTTC I (NC + TM1)
in Agroentrepreneurship NC Ill and
No amendment
• Must have at least 2 years job/industry experience
for the last five (5) years
II. A - LIST OF TOOLS, EQUIPMENT AND MATERIALS
Agroentrepreneurship NC Tools Tools
IV Description Qty Description Qty
Scissor 1 pc Scissor 1 pc
Calculator 5 pc Calculator 5 pc
Equipment Equipment
Portable speaker with 1 unit Portable speaker with microphone 1 unit
microphone
Camera phone 1 unit Smartphone 1 unit
White / Black Board 1 unit White / Black Board 1 unit
LCD & white cloth 1 set LCD & white cloth 1 set
Materials Materials
MarkinQ pen (permanent) 25 pc Marking pen (permanent) 25 pc
Marking pen (white board)/ 5 pc Marking pen (white board)/ chalk 5 pc
chalk
Glue 5 pc Glue 5 pc
Meter tape 1 pc Meter tape 1 pc
Printer ink (black & colored) 1 set Printer ink (black & colored) 1 set
Crayon (8 pcs/box) 5 sets Crayon (8 pcs/box) 5 set
Reference materials 5 pc Reference materials (manual, 5 pc
(manual, guide book) guide book)
Production inputs (e.g., 5 Production inputs (e.g., seeds, 5
seeds, Fertilizers, samples Fertilizers, chemicals) sample
chemicals) s
Alcohol 2 bottle
(500
ml)
Face mask 25 pc
Face shield 25 pc
Foot bath 2 pc
Qualification : I AGROENTREPRENEURSHIP NC IV
Existing Amendment
· 3.5 TRAINING FACILITIES
Requirement meters Sq. area Total
AGROENTREPRENEURSHIPNC II meters
Based on a class sizeof 25 students/trainees
Building
SPACEREQUIREMENT SIZEIN AREA IN TOTAL GRAND TOTAL Lecture 2.00x1.0 2.00/ 50.00
METERS SQ. AREA IN AREA IN SQ. room/area 0 student
METERS SQ. METERS Learning 3.00x5.0 15.00 15.00
METERS
A. Building(pennanent) 125.00 resource 0
, Student/Trainee 2.00X 2.00per 50.00 Store Room 4x4 16.00
LectureArea 1.00per s11Jdent
student/trainee Wash Room 2x1 2.00
• LeamingResource 3.00 X 5.00 15.00 15.00
Center Rest Room 3x4 12.00
• AdivityRoom 30.00 (male,female
indudi,g facilities:
-washroom 2x1 2.00
& pwd)
-storeroom 4x4 16.00 Disinfection/sc
• restroom (male, 3x4 12.00
female& PWD) reenin area 2x3 6.00
B.Demo Area• S00.00 infront of main
TOTAL: 625.00 entrance
Note:'Atttss to and use of acitiesCM be promed ttvoog,r.ooperatiYe Mangemenls
olWAwithoiherl)ilt'lerenterpises/a .
For rural area 500
Total 701
II. C - TRAINERS' QUALIFICATION lTQ)

Qualification: I AGROENTREPRENEURSHIP NC IV
Existing Amendment
• Must be a holder of NTTC I (NC+ TM1)
in Agroentrepreneurship NC IV and
No amendment
experience for the last five (5) years
II A- LIST OF TOOLS I EQUIPMENT AND MATERIALS
Animal Health Care Tools Tools
and Management Description Qty Description Qty
NC Ill Driving board 5 pc Driving board 5 pc
Snoozer 5 pc
Rope 5 pc Rope 5 pc
Pig wire 5 pc Pig wire 5 pc
Allis tissue forceps 25 pc Allis tissue forceps 25 pc
Scalpel with blade 25 pc Scalpel with blade 25 pc
Torch 1 pc
Sterilizer set 1 set
Ear tags and ta :rner 5 pc
Tooth clipper 5 pc
Surgical scissor 5 pairs
Equipment Equipment
Castration table 5 unit Castration table / castration cart / 5 unit
multi-purpose cart
Medication tray 5 set Medication tray / Toolbox 5 set
Cart 5 unit Cart 5 unit
Boots 25 pairs
Disposable suit 25 pairs
Sprayer (portable, power 1 unit Sprayer (portable, power sprayer) 1 unit
sprayer)
Container equipment 5 pc
Cool box 5 pc
Styropor box 5 pc
Refrigerator, Ordinary 1 unit Refrigerator, Ordinary 1 unit
Covered box 5 pc
Semen Refrigerator 1 unit
Materials Materials
Description Qty
Sacks/Hood 5 pc Sacks/Hood 5 pc
Vial 25 pc Vial 25 pc
Test tube 25 pc Test tube 25 pc
Needles 25 pc Metal Needle (assorted from 1 box
16,18,21)
Syringe (10 ml. 20ml) 25 set Fiber glass syringe (10 ml. 20ml) 25 set
Mineral oil (bottle) 200 ml Mineral oil (bottle) 200 nil
Cap (cotton, cork, rubber 25 pc Cap (cotton, cork, rubber stopper) 25 pc
stopper)
Refrigerant 25 pc Refrigerant 25 pc
Resealable plastic bag 25 pc Resealable plastic bag 25 pc
Ice packs 25 pc Ice packs 25 pc
Glass slide 25 pc Glass slide 25 pc
Vacutainer 25 pc Vacutainer test tube 5 box
(color coded: violet and red)
Paints 500 ml Paints 500 ml
Rust remover 500 ml Rust remover 500 ml
Chemical disinfectants 1 liter Chemical disinfectants 1 liter
Drugs, biologics and 5 bottle Drugs and biologics (vaccine, 5 bottle
dewormer, antibiotics, vitamin each
supplement)
Cooler Box/ Styropor Box 5 pc
Plastic Covered Box 5 pc
Tuberculin syringe 1 box
Vacutainer needle 5
boxes
Vacutainer holder 25 pc
Test tube rack 5 pc
Sterile cotton swab (individually 5 box
pack)
Ordinary cotton 5 packs
Alcohol 1
gallon
Iodine 1 liter
Wound spray 5 bottle
Masking tape 5 pc
Animal marker 5 pc
Glass slide 5 box
Cover slip 5 box
Germicidal/antibacterial soap 5 pc
Paper towel 5 pc
PPEs
Rubber Boots 25 pc
Scrub suit 25 pc
Mask 25 pc
Gloves 25 pc
II. B - TRAINING FACILITIES {TF)
Qualification : I Animal Health Care and Management NC Ill
Existing Amendment
SPACE SIZEIN AREA IN TOTAL GRAND
3.5 TRAINI G FACILITIES
REQUIREMENTS METERS SQ. AREA in TOTAL
ANIMAL HEALTH CARE AND MANAGEMENTNC METERS SQ.
UI METER
Based on a class size of 25 studenWtrainees
A. Permanent
345
SPACE REQUIREMENT SIZE IN METERS AAEAINSQ. TOTAL AREA IN SQ.
Building
METERS METERS Student/Trainee
• Bulding 13.00X 195.00 195.00 Working Space
(permanent) 15.00
• Studenl/Trainee 2.00X 4.00per student 100.00 Lecture Room
Working Spaoe 2.00per Learning Resource No Amendment
student/trainee Center
• Lecture Room 7.00x5.00 35.00 35.00
• earninRg 15.00
Facilities/Equipment/
3.00x5.00 15.00
esource Center Circulation Area
(Library) B. Live Stock Farm 100.00 X 10,000 10,000.00 10,000.00
• Faciities/EquipmenU 13.00X 15.00 195.00 195.00 100.00
Clrculalionf.Jea
Components of
• Livestock Fann' 100.00X 10,000 10,000.00
Live Stock Farm
Nole: • Alea will change accordng to availabi ovfestocklann for training, • Feed mill
observationanddemoostraoon.
• Warehouse
area
• Quarantine area
• Disposal area
• Animal Housing
Facility
• Restraining
area with chute
Total 10,345.00
II. C · TRAINERS' QUALIFICATION (TQ)
Qualification: I Animal Health Care and Management NC Ill
Existing Amendment
• Must be a holder of Animal Health Care and Management NC • Must be a holder of NTTC Level I (NC+TMC) on Animal
Ill or its equivalent qualification Health Care and Management NC Ill
Must have undergone training on Training Methodology Ill • Must be computer literate
(TM Ill} • Must have at least 2 years' job/industry experience within
• Must be computer literate the last five (5) years
• *Must have at least 2 years' job/industry experience
Must be a civil service eligible (for government position or
appropriate professional license issued by the Professional
Regulatory Commission)

Reference: TESDA Board Resolution No. 2004 03
II A - LIST OF TOOLS I EQUIPMENT AND MATERIALS
Animal Production Tools Tools
(Poultry-Chicken) NC Description Qty Description Qty
II Electric lamps 1 LED lamps/lights 8 pc
Pail 1 Pail 1 pc
Feed scoop 1 Feed scoop 1 pc
Syringe and needles 1 Syringe and needles 1 pc
Debeaker 1
Knapsack sprayer 1 Knapsack sprayer 1 pc
Eqq qrader 1
Hover 1
Chick guard 30
Curtains 1
Portable heater
Plastic feeders, 5-10 kgs Plastic tube feeders (15-20) 5 pc
Chick feeders 10 pc
Weiqhinq scale (500 kq. cap.)
Syringes (5 to 20ml cap.) Syringes (5 to 20ml cap.) 1 pc
Hammer Hammer 1 pc
Shovel, wheel barrow Shovel 1 pc
wheel barrow 1 pc
Mineral boxes Mineral boxes 1 pc
Waterer Waterer 1 pc
Feedinq trough Feeding trouqh 1 pc
Feed bin 1pc
Equipment Equipment
Generator 1 Generator 1unit
Heater 1 Hover heater/Portable heater 3 unit
Weighing scale 1 Weighing scale (500 kg. cap.) 1 unit
Wheel barrow 1 Wheel barrow 1 unit
Feed cart 1 Feed cart 1 unit
Infrared gas brooder 1 Infrared lamps 1 unit
Fabricated layer cages 30 Fabricated layer cages 30 unit
Power Sprayer 1 Power Sprayer 1 unit
Egg sorter 2 unit
Debeaker 1 unit
Models/actual objects Models/actual objects
Breed/strain/ hybrid: 60 Breed/strain/ hybrid: 60 pc
Broiler strains: Broiler strains:
• Hydro G • Hydro G
• Pilch-de-kalb • Pilch-de-kalb
• Lohman • Lohman
• Starbro • Starbro
• Arbor acre • Arbor acre
• Avian Peterson • Avian Peterson
Strains of layers: Babcock 30 Strains of layers: Babcock 30 pc
• Dekalb • Dekalb
•H&N • H&N
• Hi-sex white • Hi-sex white
• Starcross • Starcross
• Lohman LSL • Lohman LSL
Egg layers classification (Based 30 Egg layers classification (Based 30 pc
on Phil. Product Standard, on Phil. Product Standard,
classification of chicken eggs) classification of chicken eggs)
• Jumbo >70 g • Jumbo >70 g
• XL 65-70 g • XL 65-70 g
• L 60-65 g • L 60-65 g
• M 55-60 g • M 55-60 g
• S 50-55 g • S 50-55 g
• Pullets 45-50 g • Pullets 45-50 g
• Peewee 40-45 g • Peewee 40-45 g
• no weight • no weight
Materials Materials
Curtains 1 pc
Chick guard 30 pc
Models/actual objects: 60 pc
Breed/strain/ hybrid:
Broiler strains:
• Hydro G
• Pilch-de-kalb
• Lohman
• Starbro
• Arbor acre
• Avian Peterson
Native chicken genetic groups:
• Darag
• Banaba
• Paraoakan
• Boholano
• Camarines
• Bolinao
Strains of layers: Babcock 30 pc
• Dekalb
• H&N
• Hi-sex white
• Starcross
• Lohman LSL
Native chicken genetic groups
• Daraq
• Banaba
• Paraoakan
• Boholano
• Camarines
• Bolinao
Plastic drinking jars- ¼, ½, 1 10 Plastic drinking jars- ¼, ½, 1 10 pc
gallon cap gallon cap
Chicks size feeders 10
Welded wire 1 Welded wire 1 pc
Plastic poultry wire 1 Plastic poultry wire 1 pc
PVC pipe 2 PVC pipe 2 pc
Feeding troughs (local materials 10 Feeding troughs (local materials 10 pc
bamboo or PVC pipe) bamboo or PVC pipe)
Drinking trough 10 Drinking trough 10 pc
Plastic waterers 10 Plastic waterers 10 pc
Sacks 10 Sacks 10 pc
Nests 10 Nests 10 pc
Old tire 1 Plastic waterer/basin 1 pc
Aluminum sheets 5 Aluminum sheets 5 pc
Plain GI sheets 1 Plain GI sheets 1 pc
Lawanit 2 Lawanit 2 pc
Hard card boards 5 Hard card boards 5 pc
Plywood 5 Plywood 5 pc
Old newspaper Old newspaper
Saw dust Saw dust
Rice hulls Rice hulls
Feeds: Feeds:
• Chicks booster - from 1 day Broiler chicken
to 2 weeks old • Booster
• Starter mash - -4 weeks old • Starter
• Finisher mash - 5 weeks old • Finisher
until market age
Layer Chicken:
• Starter(0-6 weeks)
• Grower (6 to 12 weeks)
• Developer (12 to 20 weeks)
• Laver (20 onwards)
Egg trays: Egg trays:
• Plastic egg trays (30 pcs • Plastic egg trays (30 pcs
capacity) capacity)
• Carton egg trays • Carton egg trays
Em:i cart Eaa cart
Eqq boxes Eaa boxes
Crates Crates
Feed buckets Feed buckets
Veterinary drugs Veterinary drugs
Dewormer Dewormer
Vaccines Vaccines
Supplements Supplements
PPE: 25 PPE: 25 sets
• Dust coats sets • Dust coats
• Mask • Mask
• Hand gloves • Hand gloves
• Boots • Boots
• Rain coats • Rain coats
• Fire extinguisher • Fire extinguisher
• Foot baths • Foot baths
Learning Materials: Learning Materials:
Production records Production records 25 pc
• Rearing flock records • Rearing flock records
• Laying flock records • Laying flock records
• Financial records • Financial records
• Inventory records • Inventoryrecords
Physical records: Physical records: 25 pc
• Brooding and growing • Brooding and growing
records records
• Laying flock production • Laying flock production
records records
Financial records: Financial records:
• Value of production and
disposal
• Value of production and
disposal
• Other sources of income • Other sources of income
• Farm expenses • Farmexpenses
Recording Materials 1 pc
(Logbook/Notebook/Record
Sheets)
White board 1 pc
II. B - TRAINING FACILITIES lTF)
Qualification : I Animal Production (Poultry-Chicken) NC II
Existing Amendment
Space Size Area in Sq. Total Grand
Requirement in meters area Total
meters
ANIMAL PRODUCTION (POULTRY-CHICKEN) NC U
Based on a dass size of 25 students/trainees

A. Permanent
Building
SPACE AREAIN GRAND
REQUIREMENT IZEIN
a. QTY
TOTAL
AREA IN TOTAL Lecture room 13X 13 195 195
METERS SQ. AREAIN Q.
METERS METER
METERS
• Building 195.00
Learning resource 10x10 100 100
(permanent) 13.00 X 15.00 195.00 1
0 student/
2.00 X 2.00per 4.00 per Store Room 6x5 30 30
Trainee 25 100.00
WorldnQSDace studenVtrailee student
o Lecture Room 7.00 X 5.00 35 .00 1 35.00 WashRoom 5x6 30 30
o Leaming
3.00 x5.00 15.00 1 15.00
Resource Area
o Tool Laboratory 195 195
room/Storage 5X5 25 1 25
room
o Wash area. B. Farm Area 2,000 2,000
TOIiet & 2X5 10 2 20
Locker room
• Poultry house
C. Poultry House 200 200
and
40- Facilities
facilities
• Fann area 100
Total 2,750 2,750
Note: - Land area of poutt,y houae good for one hundred (120) binls
Prior to accrecf lion, a traini'lg provide must have a Memorandum of Agrttment with p11V3le
poulry farm with a al least one poultry house as practice farm/workplace for lhe trail s.

Qualification: I Animal Production (Poultry-Chicken) NC II
Existing Amendment
New Trainer:
• Must be a holder of National TVET Trainer Certificate I • Must be a holder of NTTC I (NC+TMC)
(TMI and NC) on Animal Production(Poultry-Chicken) NC
• Must be physically and mentally fit II
• Preferably computer literate • Must have at least 2 years industry
experience withinthe last 5 years
Existing Trainer:
• Must be a holder of NTTC I (NC+TMC)
on Animal Production (Poultry-Chicken)
NC II
• Must have at least 80 hours industry
immersion annually
II. A· LIST OF TOOLS. EQUIPMENT AND MATERIALS
Animal production Tools Tools
(Swine) NC II Description Qty Description Qty
Catheters 100 pc Catheters 100 pc
First aid kit 1 set First aid kit 1 set
Training bag 12 pc Training bag 12 pc
Shovel 1 pc Shovel 1 pc
Sandbag 1 pc Sandbag 1 pc
Pipette 5 pc
Glass rod/ stirrer 5 pc
Erlenmeyer flask, 2L 5 pc
Erlenmeyer flask, 1L 5 pc
Glass Beaker, 1L 5 pc
Glass Beaker, 2L 5 pc
Eosin-nigrosin stain 5 pc
Equipment Equipment
Microscope 4 unit Electric Microscope/Microscope 4 unit
with Monitor
Personal Protective 12 pc Personal Protective 12 pc
Paraphernalia(scru b suits, Paraphernalia(scru b suits,
powder-free vinyl gloves, rubber powder-free vinyl gloves, rubber
boots) boots, face mask)
Laboratory gown 12 pc Laboratory gown 12 pc
Vehicle 1 unit Farm vehicle 1 unit
Camera 1 unit Camera 1 unit
Power sprayer 1 unit Power sprayer 1 unit
Generator set 1 unit Generator set 1 unit
Refrigerator (16 to 17 degree C) 1 unit Semen refrigerator (16 to 17 1 unit
degree C)
Fire extinguisher 1 unit Fire extinguisher 1 unit
Set Audio visuals with screen 1 unit Set Audio visuals with screen 1 unit
White board 1 unit White board/LED Wall/Smart 1 unit
Wall/Green Board
Chairs and tables 12 set Chairs and tables 12 set
Photocopier 1 unit Photocopier 1 unit
Dryer-Sterilizer 1 unit Dryer-Sterilizer 1 unit
Semen transport box 1 unit Semen transport box 1 unit
Water Bath
Semen Meter/spermiodensimeter/ 5 unit
SDM5flSPERM/hemocy- tometer
Materials Materials
Semen bottles 50 Semen bottles 50
bottles bottles
Female Reproductive Organ 1pc Female Reproductive Organ 1pc
Specimens Specimens
Pail and dipper 2 sets Pail and dipper 2 sets
Hose 10 m Hose 10 m
lsopropyl alcohol (70%) 6 lsopropyl alcohol (70%) 6
bottles bottles
Germicidal Soap 6 pcs Germicidal Soap 6 pcs
Paper towels 6 packs Paper towels 6 packs
Glass slides 5 boxes Glass slides 5 boxes
Cover slips 5 boxes Cover slips 5 boxes
Trash can 2 pc Trash can 2 pc
Disposal waste bags 50 pcs. Disposal waste bags 50 pcs.
Broomstick 2 pcs. Broomstick 2 pcs.
Brooms 2 pcs Brooms 2 pcs
Brush 6 pcs Brush 6 pcs
Board marker 6 pc Board marker 6 pc
.MaskingTapes 2 rolls Masking Tapes 2 rolls·
·Pencil/ballpen 12 pcs Pencil/ballpen 12 pcs
Bond paper 5 Bond paper 5 reams
reams
Pheromones 2 Pheromones/ Injectable hormone 2
spray spray
bottle bottle
Semen (for the snout for heat 2 bottle Stale Semen/fresh semen (for the 2
detection) snout for heat detection) bottles
Semen (for Al) 100 Semen (for Al) 100
bottles bottles
Pre-warmed collecting cup 4 pcs Pre-warmed collecting cup 4 pcs
Semen filter 1 box Semen filter 1 box
Rubber band 1 box Rubber band 1 box
Distilled water 30 L. Distilled water 30 L.
Plastic gloves 1 box Plastic gloves 1 box
Nutrient agar plates 12 pcs. Nutrient agar plates 12 pcs.
Lubricant 2bottles Lubricant 2bottles
Laboratory thermometer 4 pc Laboratory thermometer 4 pc
Damp cloth/ used newspaper Damp cloth/ used newspaper
Tissue paper 6 rolls Tissue paper 6 rolls
·Models /actual object Models /actual object
Practice animals (boar) 2 unit Practice animals (boar) 2 unit
Practice animals (Sow/gilt) 5 unit Practice animals (Sow/gilt) 5 unit
Dummy sow 1 unit Dummy sow 1 unit
Learning Materials Learning Materials
Training manuals 12 pcs Training manuals 12 pcs
Animal charts 1 Animal charts 1 pc
Animal breeds 1 Animal breeds 1 pc
Video materials 1 Video materials 1 pc
Forms(animal information sheets, 12 pc Forms(animal information sheets, 12 pc
sow card, boar card) sow card, boar card)
Qualification : I Animal Production (Swine) NC II
Existing Amendment
3.5 TRAINING FACILmES
ANIMALPRODUCTION(SWINE) NC II No Amendment
Based on a class siZe of 25 students/Ira· s
SPACE REQUIREMENT SIZE INMETERS AREA IN SQ. TOTAL AREA GRAND

METERS I SQ. TOTAL
ETERS AREA
IN
. SQ.Iii.
• Building 13.00 X 15 00 195.00 195.00
foermanent) .
o StudenlfTralnee 2 00 X 2.00 4.00 per student 100.00
Worluno Soac8 sl per .
udenl/lra
o Ledin Room 7.00xS.00 35 00 35.00
o Leaming J,UUX5.00 15.00 15.00
Resource Center
o Tool
room/Stontge SxS 25x 1 25
room
o Wash ea, Toilet
& Lodter room 2x5 10x2 20
• Hou ing "th
facilities
• Fann rea 300
Note: ••11a1100-
NW. "
Prior lo eccndt1allon,. nww,g prO'Ade lftJSI AV-- private
the.._
cvmefarm • at INst fl--.40w level farm• p,acliCe farmlwotlcplace fof

Qualification: I Animal Production (Swine) NC II
Existing Amendment
• Must be a holder of National TVET Trainer Certificate I • Must be a holder of NTTC I (NC+TMC) on
(TMI and NC) Animal Production (Swine) NC II
• Preferably computer literate • Must be computer literate
• Must be physically and mentally fit • Must have at least 2 years industry
experience within thelast 5 years
Artificial Insemination (Large
Ruminants) NC II Tools Tools

Al Kit 12 Al Kit 12 pc
Thawing jar with thermometer 12 pc
Catheters 24 Catheters 24 pc
Bull lead 1 pc. Bull lead 1 pc
Nail cutter 1 pc. Nail cutter 1 pc
First aid kit 1 set First aid kit 1 set
Training bag 12 pcs. Training bag 12 pc
Shovel 1 Shovel 1 pc
Wheel barrow 1 Wheel barrow 1 pc
Equipment Equipment
Liquid Nitrogen Tank 1 Liquid Nitrogen Tank 1 unit
(Dewar) with 33 L with 33 L capacity (Mother tank)
capacity (Mother
tank)
Liquid Nitrogen Tank 1 Liquid Nitrogen Tank 1 unit

With 3 L capacity With 3 L capacity (field tank)
(field tank)
Personal Protective 12 sets Personal Protective 12 sets
Paraphernalia (boots, Paraphernalia (rubber boots,
coverall/ apron, coverall/ apron, surgical and
surgical and shoulder- shoulder-length plastic gloves
length plastic gloves
Vehicle (optional) 1 Vehicle or motorcycle (optional) 1 unit
Camera 1 Camera 1 unit
Microscope 1 Microscope 1 unit
Power sprayer 1 Power sprayer (optional) 1 unit
(optional)
Gen set (optional) 1 Generator set (optional) 1 unit
Freezer 1 Refrigerator, upright, 7 cu ft. 1 unit
Fire extinguisher 1 Fire extinguisher 1 unit
Set Audio visuals with 1 1 unit
screen Set Audio visuals with screen
White board 1 White board 1 unit
Chairs and tables 12 sets Chairs and tables 12 sets
Computer 2 Units Computer/Laptop 2 units
Printer 1 Printer 1 unit
Photocopier ( optional) 1 Photocopier ( optional) 1 unit
Models/actual Models/actual objects
objects
Practice animals 12 Practice animals, mature 12 units
healthy female
Squeeze Chute/ Stanchion 1 unit
Materials Materials
Semen straws, 1,200 Frozen semen, 0.5ml 600 pcs
pcs
Al sheaths 1,200 Al sheaths 600 pcs

pcs
Female Reproductive 6 pcs Female Reproductive Organ 6 pcs

Organ Specimens, Specimens, cattle or carabao
Rope 120 m. Rope,#14 120 m.
Iodine (10% 1L Iodine (10% Povidone) 1L
Povidone)
Pail and dipper 2 sets Pail and dipper 2 sets
Hose 10 m Hose 10 m
Ethyl alcohol (60%) 12
bottles
lsopropyl alcohol 12 lsopropyl alcohol (70%) 12 bottles
(70%) bottles
Germicidal Soap 12 pcs. Liquid Soap 12 bottles
Disposable towel 12 pcs. Disposable towel 12 pc

Flash light 1pc. Flash light 1pc.
Glass slides 1 box Glass slides 1 box
Cover slips 1 box Cover slips 1 box·
Trash can 2 Trash can 2 pc
Disposal waste bags 50 pcs. Disposal waste bags 50 pc
Paper towels 12 Paper towels 12 pack
packs
Broomstick 2 pcs. Broomstick 2 pc
Surgical gloves 1 box Surgical gloves 1 box
Shoulder-length 1 box Shoulder-length gloves 1 box
gloves
Brooms 2 pcs. Brooms 2 pcs.
Brush 6 pcs. Brush 6 pcs.
Manila paper 12 Manila paper 12 sheets
sheets
Board marker 6 pcs Board marker 6 pcs
Tapes 2 rolls Tapes/masking 2 rolls
Pencil 12 pcs Pencil 12 pcs
Learning Materials Learning Materials

• Training manuals 12 pcs • Trainingmanuals 12pcs
• Animal charts 1 pc
• Animal breeds 1 pc • Breeding calendar 1 pc
• Video materials 1 lot • Video materials 1 lot
II. B - TRAINING FACILITIES CTF)

Qualification : I Artificial Insemination(Large Ruminants) NC II
Existing Amendment
Space Requirement Size Area in Total Grand
in Sq. area Total
ARTIFICIAL INSEMINATION (LARGE RUMINANTS) NC II
meters meters
Based on a dass size of 12 students/trainees
A. Permanent
Building
SPACE REQUIREMENT SIZE IN METERS
TOTAL AREA IN SQ.
METERS Lecture Room No Amendment 35.00
• WorkinQ Corral 30 x30 900
•
•
Animal House
Lecture Room
4 x 2 per animal x12
7x 5
96
35.00 Laboratory Room No Amendment 48
• Laboratory room 6x8 48
• Storage room 4x3 12 Storage Room No Amendment 12
• Locker room/ Dressing area
Locker room/ No Amendment 12
o Female 4x3 12
Dressing area
o Male 4x3 12 12
Wash area/ comfort 14.20 14.20 14.20
room
(Male, Female, PWD)
B. Demo Farm
Working Coral 8 X 10 80.00 80.00 80.00
Animal House 4x2 96.00 96.00 96.00
per
animal
x12
Total 309.20
NOTE: Access to and use of equipment/ facilities can be
provided through cooperative arrangements or MOA with
other partner- farms/ companies.
Qualification: I Artificial Insemination (Large Ruminants) NC II
Existing Amendment
• Animal Science Graduate or Doctor of Veterinary • Must be holder of NTTC Level I (NC II and
Medicine; or TMC) on Artificial Insemination
• Must be a holder of Artificial Insemination NC II (Large Ruminants) NC II
• Must have undergone training on Training • Must have at least 1 year job/industry
Methodology I (TM I) experience within the last 2 years
experience
II. A· LIST OF TOOLS, EQUIPMENT AND MATERIALS
Drying and Milling Tools Tools
Plant Servicing NC Description Qty Description Qty
Ill Set of box wrench 5 pc Set of box wrench 5 pc
- 12" adjustable 5 pc - 12" adjustable 5 pc
Sets Allen wrench 5 pc Sets Allen wrench 5 pc
Steel tape measure 5 pc Steel tape measure 5 pc
Stop watch 5 pc Stop watch 5 pc
Sets open-end wrench 5 pc Sets open-end wrench 5 pc
Ballpeen hammer 5 pc Ballpeen hammer 5 pc
Vice grip 5 pc Vice grip 5 pc
Pliers- mechanical 5 pc Pliers- mechanical 5 pc
C-clamp 5 pc C-clamp 5 pc
Sets socket wrench 5 pc Sets socket wrench 5 pc
Lever-locking Pliers 5 pc Lever-locking Pliers 5 pc
Grease Gun 5 pc Grease Gun 5 pc
Sets Flat screw driver 5 pc Sets Flat screw driver 5 pc
Sets Philips screwdriver 5 pc Sets Philips screwdriver 5 pc
Flat file 14 5 pc Flat file 14 5 pc
11 11
Half -round file 14 " 5 pc Half -round file 14 " 5 pc

Triangular file 12" 5 pc Triangular file 12 5 pc
11
Puller - bearing 8" 5 pc Puller - bearing 8" 5 pc

Puller -bearing 5" 5 pc Puller -bearing 5" 5 pc
Hacksaw with blade 5 pc Hacksaw with blade 5 pc
Rubber mallet 5 pc Rubber mallet 5 pc
Steel brush 5 pc Steel brush 5 pc
Tin snips -aviation 5 pc
Tin snips straight 14" 5 pc Tin snips straight 14" 5 pc
Bench vise 5 pc Bench vise 5 pc
Flat vise clamp 10 " 5 pc Flat vise clamp 10 " 5 pc
Hand riveter 5 pc Hand riveter 5 pc
Equipment Equipment
Mechanical dryer: Mechanical dryer:
- Batch-type 1 unit - Batch-type 1 unit
- Continuous 1 unit - Continuous 1 unit
Rice mill Rice mill
- Single-pass 1 unit
1 unit Single-pass or multi-pass
- Multi-pass 1 unit
Corn mill facility Corn mill facility 1 unit
- Hammer mill 1 unit Hammer mill or roller mill
- Roller mill 1 unit
Multimedia projector 1 unit Multimedia projector 1 unit
Screen 1 unit Screen 1 unit
Tachometer 2 unit Tachometer 2 unit
Weighing Scale 2 unit Weighing Scale 2 unit
Diesel engine 12.5hp with base 2 unit Diesel engine 12.5hp with base 2 unit
Biomass Furnace 2 unit Biomass Furnace 2 unit
Blower 2 unit Blower 2 unit
Portable grinder 1 unit Portable grinder 1 unit
Portable drill 1 unit Portable drill 1 unit
Welding machine 1 unit Welding machine 1 unit
Drill press 1 unit
Power cut-off 1 unit Power cut-off 1 unit
Bench grinder 1 unit Bench grinder 1 unit
Set Oxyacetylene 1 unit
Materials Materials
PPE: PPE:
25 pc Hard hat 25 pc
Hard hat 25 pc Safety shoes 25 pc
Safety shoes 25 pc Dust Mask 25 pc
Dust Mask 25 pc Hand Gloves 25 pc
Hand Gloves 25 pc 25 pc
Earmuff
Earmuff 25 pc Long Sleeve Shirt 25 pc
Long Sleeve Shirt 25 pc Goggles 25 pc
Goggles 25 pc Face shield 25 pc
Face shield
Bolt w/ nut 1/2x2 9 pc Bolt w/ nut 1/2x2 9 pc
Grease 5 kg Grease 5 kg
Sanding paper #220 25 pc Sanding paper #220 25 pc
Teflon Tape 3 pc Teflon Tape 3 pc
Fuel and Oil 20 L Fuel and Oil 20 L
Belt 2 pc Belt 2 pc
Pulley 1 pc Pulley 1 pc
Welding mask 25 pc Welding mask 25 pc
Rice Hull 25 Rice Hull 25 bag
bag
Welding rods (SMAW) 10 kg Welding rods (SMAW) 10 kg
Flat bars ¼"x2"x20' 2 pc Flat bars ¼"x2"x20' 2 pc
Round bars 1/2 "X20' 2 pc Round bars 1/2 "X20' 2 pc
Angular bars 2"x2"x20' 2 pc Angular bars 2"x2"x20' 2 pc
Set of drill bits 1 set Set of drill bits 1 set
Grinding discs 25 pc Grinding discs 25 pc
Cutting discs 25 pc Cutting discs 25 pc
Box assorted rivets 1 box Box assorted rivets 1 box
Paint brush (assort. Sizes) 25 pc Paint brush (assort. Sizes) 25 pc
Replacement parts Replacement parts
Set rubber roll Assorted bearings 1 set Set rubber roll Assorted 1 set
Assorted bolts and nuts bearings Assorted bolts
and nuts
AGRICULTURE,.FORESTRY AND FISHERY SECTOR
Qualification : Drying and Milling Plant Servicing NC Ill
Existing Amendment
3.5 TRAINING FACILITIES Space Requirement Size in Area Total Grand
DRYINGAND MILLINGPLANT SERVICING NC Ill meters in Sq. area Total
meters
Based on a dasssize of 25 students/trainees
TOTAL AREA
SPACEREQUIREMENT
SIZE IN AREA INSQ.
INSQ. Building
METERS METERS
METERS Lecture room/area No Amendment
• Student/Trainee 2,00X 2.00per 4.00per student 100.00
WorkinQ Space student/trainee Learning resource No Amendment
• LectureRoom 7.00X 5.QQ 35.00 35.00 Store Room No Amendment
Center Wash Room No Amendment
• MachineryShed 10x20 200 200 Rest Room No Amendment
o Wash room
(maleand
(male,female & pwd)
female) Disinfection/screening
TOTAL AREA 350
Note: *Accessto and use of equlpmentlfacllillts canbe provided throughcooptr1tlv1 arrangements
area infront of main 2x3 6.00
of MOA with other partner-companlesi1nstltutlons. entrance
B. Demo Area - - - 500.
Total 601

Qualification: I Drying and Milling Plant Servicing NC Ill
Existing Amendment
• Must a be a holder of NTTC Level I in Drying and Milling • Must a be a holder of NTTC Level I (NC II and TMC) in
Plant Servicing NC Ill Drying and Milling Plant Servicing NC Ill
• Must be a graduate of Agricultural Engineering or • Must be a graduate of B.S. Agricultural Engineering or
Mechanical Engineering B.S. Mechanical Engineering, or any Engineering courses
• *Must have at least two (2) years job/industry relevant to drying and milling plant servicing
experience for the last five (5) years • Must have at least two (2) years job/industry experience
for the last five (5) years
*Optional. Only when required by the hiring institution.
Tools Tools
Fishport/Wharf Description Qty Description Qty
Operation NC I A. Food/Fish Handler
Wooden mallet 5 pc Wooden mallet 5 pc
Fish tray/tub 25 pc Fish tray/tub 25 pc
Brush 25 pc Brush 25 pc
Bucket or pail 25 pc Bucket or pail 25 pc
Stainless hook or ganso 25 pc Stainless hook or ganso 25 pc
Pressurized or ordinary hose 1 pc Pressurized or ordinary hose 1 pc
8. Harbor Operations Assistant I HOA)
Telescope 5 pc
Flashlight 5 pc
Equipment Equipment
- Conveyor 1 set Conveyor 1 set

Cartwheel 5 unit Cartwheel 5 unit
Classifying table 5 unit Classifying table 5 unit
Weighing scale 5 unit Weighing scale 5 unit
Foot operated drinking fountain 5 unit Foot operated drinking fountain 5 unit
Personal Protective Equipment: 25 sets Personal Protective Equipment: 25 sets
Apron Apron
Gloves Gloves
Rubber boots/ Winter boots Rubber boots/ Winter boots
Head gears Head gears
Winter jacket Winter jacket
Hard hat Hard hat
Long pants Long pants
White shirts White shirts
Face Mask 25 pc
Face shield 25 pc
Hair net 25 pc
Overall outer garments 25 pc
8. Harbor Operations Assistant (HOA)
CCTV ·1 unit
Hand-held radio 5 unit
Megaphone 3 unit
Materials Materials
Soap 25 pc Soap 25 pc
Chlorine 5L Chlorine 5L
Sanitizing agent/alcohol 1 gallon
Disinfectant/lysol 250ml
II. B • TRAINING FACILITIES (TF)
Qualification : I Fishport/Wharf Operation NC I
Existing Amendment
FISHPORTiWHARF OPERATIONS NC I Space Size in Area Total Grand

Based on a class sizeof 25 students/trainees. Requirement meters in area Total
Sq.
SPACE REQUIREMENT SIZE IN METERS AREA IN TOTAL AREA IN meters
SQ. SQ.METERS A. Permanent 294.00
METERS Building
A.Building(permanent) 170.30 Lecture room 200.00 200.00
• StudenVTrainee 2.00X 2.00per 4.00per student 100.00 Learninq resource 30.00 30.00
Working studenVtrainee Dressing Room 10.00 10.00
Space Hand Washing 2x2x1 4.00 4.00
Station
• Leaming Resource 3.00 xS.00 15.00 15.00
Center Laboratory 50.00 50.00
• Facilities.lEquipmenU 39.30 B.Fishport/Wharf 20,000.00 20,000.00
CirculationArea
Total 20,294.00
• Store Room 4.00x4.00 16.00 16.00
8. Fishport/Wharf•
Note: 200.00toX 100.00
•Area will change according avalabilityof 20,000.00
fishport/wharf for 20,000.00
training,
observation and demonstration.
II. C · TRAINERS' QUALIFICATION lTQ)

Qualification: I Fishport/Wharf Operation NC I
Existing Amendment
• Must be a holder of Fishport/Wharf Operations NC I • Must be a holder of NTTC level I (NC II and TMC)
or its equivalent on Fishport/Wharf Operations NC I
• Must have undergone training on Training • Must be computer literate
Methodology 11 (TM 11) • Must have at least 2 years job/industry experience
• Must be computer literate within the last five (5) years

Grains Production Tools Tools
NC II Description Qty. Description Qty.
Calculator 5 pcs Calculator 5 pcs
Scythe 15 pcs Scythe 15 pcs
Shovel 15 pcs Shovel 15 pcs
A-frame 25 pcs A-frame 25 pcs
Bolo 15 pcs Bolo 15 pcs
Farmalite 5 units Farmalite 5 units
Magnifying lens 5 units Magnifying lens 5 units
Sack needle 5 pcs Sack needle 5 pcs
Rodent trap 5 sets Rodent trap 5 sets
Moisture meter 1 unit Moisture meter 1 unit
Sharpening stones 5 pcs Sharpening stones 5 PCS
Traingular files 5 pcs Traingular files 5 pcs
Sickle 10 pcs Sickle 10 pcs
Meter tape 5 pc
Equipment Equipment
Electric fan 2 units Electric fan 2 units
Stand projector 1 unit Stand projector 1 unit
Lapel 1 unit Lapel 1 unit
Digital camera 1 unit Digital camera 1 unit
Hand tractor 2 units Hand tractor 2 units
Plow 3 units Plow 3 units
Harrow 3 units Harrow 3 units
Draft animals * 1 unit Draft animals * 1 unit
Rotavator 1unit Rotavator 1unit
Paddling 1unit Paddling 1unit
Spiral/auger 1unit Spiral/auger 1unit
Multi tiller* 1unit Multi tiller * 1unit
Drum seeder 1 pc Drum seeder 1 pc
Knapsack sprayer 4pc Knapsack sprayer 4pc
PPE/safety gears 5 sets PPE/safety gears 5 sets
Weeder 1 unit Weeder 1 unit
Electric fan 1 unit Electric fan 1 unit
Shed House 1 unit Shed House 1 unit
• Bamboo • Bamboo
• coconut leaves/nipa • coconut leaves/nipa
• cogon • cogon
• coco lumber • coco lumber
• nails • nails
• rattan • rattan
PPEs:
Face mask 25 pc
Face shield 25 pc
Gloves 25 pc
Hats 25 pc
Rubber boots 25 pc
Shed Houselong sleeves 25 pc
Farm tractor with corn planter 1 unit
(wide scale productionarea)
Android Cellphone/Tablet 1 unit
Power Sprayer 1 unit
Seed Spreader 1 unit
Grass cutter 1 unit
Leveler 1 unit
Power tiller (Floating tiller) 1 unit
Tractor trailer 1 unit
Materials Materials
Petri dish 25pcs Petri dish 25pcs
Rice and Corn Seeds 100g Rice and Corn Seeds 100g
Paper Towe 1Roll Paper Towe 1Roll
White board marker and eraser 1 set White board marker and eraser 1 set
Alcohol 2 Alcohol 2 bottles
bottles
Cotton 100gin Cotton 100g
roll in roll
Cartolina 10 pcs Cartolina 10 pcs
Manila paper 10 pcs Manila paper 10 pcs
Permanent marker 10 pcs Permanent marker 10 pcs
Record book 25 pcs Record book 25 pcs
Ballpen 25pcs Ballpen 25pcs
Plastic cellophane 1 pack Plastic cellophane 1 pack
Index card 5 packs Index card 5 packs
Pallet Spcs Pallet 5pcs
Certified seeds 12kg Certified seeds 12kg
Pails 5 pcs Pails 5 pcs
Sacks (5kg) 15pcs Sacks (5kg) 15pcs
Nets Sm Nets Sm
Banana leaves 12 pcs Banana leaves 12 pcs
Carbonized rice hull 1 sack Carbonized ricehull 1 sack
Chemicals 1bot Chemicals 1bot
Fungicide 1bot Fungicide 1bot
Herbicide 1bot Herbicide 1bot
Insecticide 5bot Insecticide Sbot
Molluscicide 1bot Molluscicide 1bot
Rodenticide 1bot Rodenticide 1bot
Rice straw 2 sacks Rice straw 2 sacks
Rice hull 2 sacks Rice hull 2 sacks
Tying materials 1 Tying materials 1 bundle
bundle
Plastic bags for fertilizer 5 pcs Plastic bags for fertilizer 5 pcs
Inorganic fertilizer Inorganic fertilizer
Urea 10kg Urea 10kg
Complete 64kg Complete 64kg
Ammophos 10kg Ammophos 10kg
First aid kit 2 sets First aid kit 2 sets
MOET Kit 5set MOET App 5set
STK Kit 1 set STK Kit 1 set
LCC 5 set LCC App 5set
Polyethylene seedling bags 35 pcs Polyethylene seedling bags 35 pcs
Meter stick 5 pcs Meter stick 5 pcs
Insect nets 5 pcs Insect nets 5 pcs
Sacks (packaging material) 15 pcs Sacks (packaging material) 15 pcs
Drying nets 5 pcs Drying nets 5 pcs
Plastic twine 1 roll Plastic twine 1 roll
Winnower 5 pcs Winnower 5 pcs
Cleaning materials 5 sets Cleaning materials 5 sets·
■
Brooms ■
Brooms
■
Dust pan ■
Dust pan
■
o Feather Duster ■
o Feather Duster
Fuel 50 L Fuel 50 L
Oil 1L Oil 1L
Wooden plank 3 pcs Wooden plank 3 pcs
Alcohol/Sanitizer 2 bottle
(500 ml)
Seedling trays 10 pc
I. B · TRAINING FACILITIES (TF)
Qualification : I Grains Production NC II
Existing Amendment
3.5 TRAININGFACIUTIES No amendment

AGROENTREPRENEURSHIPNC II
Basedon a class ze of 25 students/trainees
SPACE REQUIREMENT SIZEIN AREA TOTAL GRAND TOTAL

METERS IN SQ. AREA AREA IN SQ.
METERS IN SQ. METERS
METERS
A.Building (pennanent) 125.00
• StudenVTrainee 2.00 X 1.00 per 2.00per 50.00
LectureArea studentflrainee s1lldenl

Center
• Activity Room 30.00
including facilities:
-washroom 2x1 2.00
-store room 4x4 16.00
- rest room (male, 3x4 12.00
female&PWD)
B.Demo Area• 500.00
TOTAL: 625.00
Nole: •NXX!!iS to and use of equ tiescan be pnMded ttrough cooperative
olMOAY.ihOh!fpar1neren .
I. C · TRAINERS' QUALIFICATION (TQ)

Qualification: I Grains Production NC II
Existing Amendment
• Must be a holder of National TVET Trainer • Must be a holder of National TVET
Certificate I Level I (TM I) in Grains Production NCII Trainer Certificate I Level I (NC and TMC)
Must have at least two (2) years relevant industry in Grains
•
experience for the last five (5) years Production NCII
• Must have at least two (2) years relevant
industry experience for the last five (5) years
Horticulture NC Ill Tools Tools
Bolos 25 pcs Bolos 25 pc
Broomstick 10 pcs Broomstick 10 pc
Calculator 5 pcs Calculator 5 pc
Container 5 pcs Crates (wooden, bamboo, rattan, Sp
plastic)
Cutting tools 5 sets Cutting/propagating tools 5 sets
- knife
- pruning shears
-
scissors
-
combined grafting and
marcotting knife
-
pole pruner
Digging tools 5 sets Digging tools 5 sets
- spade
- shovel
- garden hoe
- rake
- crew bar
- metal stake
- Pick mattock
Drying meter 2 pcs
Dulos 10 pcs Dulos / hand trowel 10 pc
Fruit crate 5 pcs
Harvesting tools 5 sets Harvesting tools 5 pc
- Pole fruit picker
Hat 25 PCS
Knapsack sprayer 5 pcs
Knife 5 sets
Light hoe 5 pcs
Personal protection equipment 5 PPEs 25 sets
- Protective gadgets
- Protective coat
- Hat
Moisture meter 2 pcs
Petri-dish 2 pcs Petri-dish 2 pc
pH meter 3 pcs pH meter 3 pc
Pick mattock 5 pcs Pick mattock 5 pc
Picking knife 5 pcs
Plow 5 pcs
Plumbing tools 2 sets
Post-Harvest treatment tools 5 sets
Protective coat 25 pcs
Protective gadgets 25 pcs
Pruning sheers 5 pcs
Rake 5 pcs Rake 5 pc
Scissors 10 pcs
Seed bed 5 Seed bed 5 pc
Seedling tray 5 Seedling tray 5 pc
Shovel 10
Sprinklers 15 Sprinklers 15 pc
Step ladder 2 Step ladder 2 pc
Storage tools/cabinet 2 Storage tools/cabinet 2 pc
Transplanting tools 25 pcs Transplanting tools 25 pc
Trowel 25 pcs Trowel 25 pc
Cardboard boxes 25 pc
Steel tape 5 pc
Equipment Equipment
Booth/temporary shed 2
Cart (Kariton & paragus) 5 Cart (Kariton & paragus) 5 unit
Coolroom 1 Coolroom 1 unit
Comb-tooth harrow 1 Comb-tooth harrow 1 unit
Computer with record keeping 1 1 unit
Computer/ Laptop
software applications
Crates 1 Crates 1 unit
Drying oven 1 Drying oven 1 unit
Farm/ field 1
Greenhouse/nursery 1
Harvesting equipment 1
Irrigation system (sprinkler, 1
mist/drip irrigation)
Mower (grass cutter) 1
Over head projector (OHP) 1 LCD/Smart TV 1 unit
Portable chain saw 1 Portable chain saw 1 unit
Post-Harvest treatment 1 Post-Harvest treatment equipment 1 unit
equipment
Power sprayer 1
PropaQation Equipment 1
Pump for irriQation 1 Pump for irrigation 1 unit
Rotavator 1 Rotavator 1 unit
Service vehicle 1 Service vehicle 1 unit
Sorting /Grading equipment 1 Sorting /Grading equipment 1 unit
Spike tooth harrow 2
Storage room 1
Surface irrigation system
Tractor/Carabao Tractor 1 unit
Typewriter Printer 1 unit
Seed moisture meter 1 unit
TRAINING MATERIALS 25 TRAINING MATERIALS 25 pc
Brochures 2 Brochures 2 pc
Instructional supplies & materials 2 Instructional supplies & materials 2 pc
Visual aids 5 Visual aids 5 pc

Reference materials/Books 5 Reference materials/Books 5 pc
(technical information on (technical information on
horticultural and agronomic horticultural and agronomic crops)
crops)
Reference manuals (first aide kit 5 Reference manuals (first aide kit 5 pc
with reference manual) with reference manual)
Data (Data on result of soil 5 Data (Data on result of soil 5 pc
analysis) analysis)
Procedural manuals 5 Procedural manuals 5 pc
Soil samples analysis 5 Soil samples analysis 5 pc
Examples of farm standard 5 Examples of farm standard 5 pc
operating procedures (SOPs) operating procedures (SOPs)
Materials Materials
Agri bags, plastic 250 Agri bags, plastic 250
pcs. pcs.
Bamboo stick 500 Bamboo stick 500
pcs pcs
Basket 5 pcs. Basket 5 pcs.
Bond paper 5 rims Bond paper 5 rims
Catching nets 5 pcs Catching nets 5 pcs
Clips 3 Clips 3
dozen dozen
Coconut dust 5 sacks Coconut dust 5 sacks
Compost 5 sacks Compost 5 sacks
Fertilizers-various 1 sack Fertilizers-various 1 sack
of each of each
First aide supplies/medicine 1 kit First aide supplies/medicine 1 kit
Flower inducer 5 Flower inducer 5
bottles bottles
Fungicides 5 Fungicides 5
bottles bottles
Gloves 25 Gloves 25
pairs pairs
Growing media (garden soil, 5 sacks Growing media (garden soil, 5 sacks
sewed sand, compost, soil, sewed sand, compost, soil,
manure and sawdust/rice manure and sawdusUrice
Killing bottles 5 pcs.
Marking pens 5 pcs. Marking pens 5 pcs.
Masks 25 pcs. Agricultural Masks 25 pc
Material Safety Data Sheets 25 pcs.
Mulching material 5 sacks Mulching material 5 sacks
- Plastic mulch
- Rice straw
Hair nets 25 m Hair nets 25 m
Packaging materials, assorted 20
Pail 5 Pail 5 pc
Pencil 25 Pencil 25 pc
Pens 25 Pens 25 pc
Pesticides/lnsecticid es 5 Pesticides/lnsecticid es 5
bottles bottles
Pieces of cloth 5 pcs. Rags 5 pc
Plastic bag 100 Plastic bag 100 pc
Plumbing supplies 1 set Plumbing supplies 1 set
Pots 250 Pots 250 pc
Propagation materials e.g. seeds Variety Propagation materials e.g. seeds Variety
spores, cuttings etc., spores, cuttings etc.,
Propagating media (garden soil, 5 sacks Propagating media (garden soil, 5 sacks
sawdust, sand, composed, sawdust, sand, composed,
coconut coir) coconut coir)
Rice hull 3 sacks
Rope, (small, med. Large) 3 rolls Rope, (small, med. Large) 3 rolls
Rubber band 3 Rubber band 3
boxes boxes
Rubber boots 25 Rubber boots 25
pairs pairs
Rubber knots Rubber knots
Sacks 25 Sacks 25
sacks sacks
Sample of matured vegetable Sample of matured vegetable
crops crops
Seed box 5 Seed box 5
boxes boxes
Seedlings, assorted Seedlings, assorted
Seeds 2 packs Seeds 2 packs
per per
crop crop
Soil auger 5 Soil auger 5
String 5 rolls String 5 rolls
Tetrazolium chemical 5 Tetrazolium chemical 5
bottles bottles
Transplanting supplies Transplanting supplies
Detergent, liquid and powder 5 pcs. Liquid cleaning agents 2 liters
soap (e.g. alcohol, clorox, muriatic acid) each
Hand soap 2
bottles
(250ml)
Brush 5 pcs Brush 5 pcs .
II. B - TRAINING FACILITIES TF
Qualification : Horticulture NC Ill
Existing Amendment

meters
A. Permanent 205.30
Buildin
Lecture room
Learning
resource
Store Room
Wash Room
Laboratory
B. Demo Farm Must have an existing 500.00
vegetable farm of about 500
sq.m (100 sq.m/vegetable)
Total 705.30
Note: Access to and use of equipment/facilities can be
provided through cooperative arrangements or MOA with
other partner-companies/institutions/private farms.

Qualification: I Horticulture NC Ill
Existing Amendment
• Must be a holder of NC IV • Must be a holder of National TVET
• Must have undergone training on Training Methodology IV Trainer Certificate (NTTC) Level I (NC and
TMC) in
(TM IV)
Horticulture NC Ill
• *Must have at least 2 years job/industry experience • Must be computer literate
* Optional: Only when required by the hiring institution experience within the last five (5) years
Reference: TESDA Board Resolution No. 2004-03
Landscape Tools Tools
Installation and Description Qty. Description Qty.
Maintenance Pruning shear or secateur 25 pc Pruning shear or secateur 25 pc
(Softscape) NC II Pruning saw 5 pc Pruning saw 5 pc
Bow saw 25 pc Bow saw 25 pc
Tree or pole pruner 5 pc Tree or pole pruner 5 pc
Hedge trimmer 25 pc Hedge trimmer 25 pc
Spade 13 pc Spade 13 pc
Hole di mer 5 pc Hole digger 5 pc
Wheel barrow 5 pc Wheel barrow 5 pc
Sprayer 5 pc Sprayer 5 pc
Mallet 25 pc Mallet 25 pc
Hammer 25 pc Hammer 25 pc
Stone rake 25 pc Stone rake 25 pc
Leaf rake 25 pc Leaf rake 25 pc
Gun tacker 5 pc Gun tacker 5 pc
Rake 13 pc Leveling rake 13 pc
Roller 5 pc Roller 5 pc
Hand trowel 25 pc Hand trowel 25 pc
Soil drencher (accessory to the 5 pc Soil drencher (accessory to the 5 pc
garden hose) garden hose)
Sand /Soil Sieve (standard size) 5 pc Sand /Soil Sieve (standard size) 5 pc
Meter tape (5 m) 25 pc Meter tape (5 m) 25 pc
Meter tape (50 m) 5 pc Meter tape (50 m) 5 pc
Ladder/ Adjustable ladder (12-24 5 pc Ladder/ Adjustable ladder (12-24 5 pc
ft) ft)
Pick-Mattock 13 pc Pick-Mattock 13 pc
Fork 25 pc Gardening Fork 25 pc
Lopping shear 25 pc
Telescopic pole pruner & saw 5 pc
Turf roller 5 pc
Fertilizer spreader 5 pc
Hand tamper 5 pc
Sprinklers 25 pc
Equipment Equipment
Chain saw 2 unit Chain saw 2 unit
Power hedge trimmer 2 unit Power hedge trimmer 2 unit
One-man soil auger 2 unit One-man soil auger 2 unit
Two-man soil auger 1 unit Two-man soil auger 1 unit
Dump truck (Ownor rent) 1 unit Dump truck (Own or rent) 1 unit
Crane or boom truck (Own or rent) 1 unit Crane or boom truck (Own or 1 unit
rent)
Boom or power sprayer (Own or 1 unit Boom or power sprayer (Own or 1 unit
rent) rent)
Grass cutter 13 pc Grass cutter 13 pc
4.5 HP lawn mover 2 unit 4.5 HP lawn mover 2 unit
Chipper / Shredder 1 unit Chipper / Shredder 1 unit
Mechanical compactor 1 unit Mechanical compactor 1 unit
Blower 1 unit Blower 1 unit
Telescopic pole branch pruner 1 unit
chainsaw
Manlift or boom truck (Own or 1 unit
rent)
Mechanical plate compactor 1 unit
Water truck (Own or rent) 1 unit
Materials Materials
Fertilizers 25 Fertilizers 25
bags of bags of
each each
type type
Pesticides 1 Pesticides 1
sample sample
for for
each each
Gloves 25 pc Gloves 25 pc
Goqqles 25 pc Goqqles 25 pc
Ear masks/ Muff/pluq 25 pcs Ear masks/ Muff/plug 25 pcs
Goqqles 25 pcs Goqqles 25 pcs
Garden hose with complete 5 Garden hose 100ft. (with 5 pcs ·
accessories pcs complete accessories)
@10
meters
lonq
Reflectorized vest 13 pc Reflectorized vest 13 pc
Overall's /working clothes 25 pc Overall's /working clothes 25 pc
Gas mask 25 pc Gas mask 25 pc
Raincoat 25 pc Raincoat 25 pc
Boots 25 pc Boots 25 pc
Safety shoes 25 pc Safety shoes 25 pc
Climbing ropes 5 pc Climbing ropes 5 pc
Hard hat 25 pc Hard hat 25 pc
Soil mix 1 bag Soil mix 1 bag
(25kg) (25kg)
Stakes (woodensquare/ round; 5 Stakes (woodensquare/ round; 5
steel, bamboo; plastic sample steel, bamboo; plastic sample
each each
Tree support units (G hose, wood 13 unit Tree support units (G hose, wood 13 unit
stake, GI wire, GI nails, burlap stake, GI wire, GI nails, burlap
pads, etc pads, etc
Guy materials (GI wire, GI or 13 unit Guy materials (GI wire, GI or 13 uni"t
wooden pegs, G hose, etc.) wooden pegs, G hose, etc.)
Mulch (decorative stone, crushed 1 bag Mulch (decorative stone, crushed 1 bag
bricks, bark chips, etc) each bricks, bark chips, etc) each
Safety apron 25 pc Safety apron 25 pc
Safety body harness kit 25 pc
Respirator (for chemicals & 25 pc
pesticides)
Protective clothing (i.e. Raincoat, 25 pc
etc.)
II. B - TRAINING FACILITIES CTF)

Qualification : I Landscape Installation and Maintenance (Softscape) NC II
Existing Amendment
3.5 TRAININGFACILITIES
LANDSCAPEINSTALLATIONAND MAINTENANCE(SOFTSCAPE)- NC II Space Size in Area in Total Grand
The worl<shop must be made of reinforcedconcre e or steel structure. The size must Requirement meters Sq. area Total
be suited on the requirements of the competencies. The facility should accommodate a
minimumof 25 students/trainees. meters
A. Permanent 221.00
Building
SPACE REQIIRBIENT SIZE INIETERS
AREAi.SQ. TOTAL AREA IN Lecture room 5.00 X 35.00 35.00 35.00
IIETERS SQ.IETERS
Worbhoo ComMnent Areas
. .
7.00
• LaboratoryM'orxshop
Area
100.00
Learning 3.00 X 15.00 15.00 15.00
• lecture Room 5 00x5.00 25.00 25 00 resource 5.00
• Tool, Supply& Storage 3.00X3.00 9.00 9.00
Room Store Room 2.00 X 10.00 10.00 10.00
• Leaming Resource
Center
2.00x5.00 10.00 10.00 5.00
• Wash Room and Toile1 2.00X5.00 10.00 10.00 Wash Room No Amendment
Total(\ Vorkshop Comoonent) 154.00
Note:Theentries
• CirculationAreain the sizs ii Workshop
130%of meters column arerecommendations
Comoonent Soace) only. The 40.00
grand total Laboratory - - 100.00 100.00
Grand(building space) isthe minimum space requirement for registration. 194.00
Total !BuildinaSoace\
Circulation area - - 51.00 51.00
(30%of work
area)
TOTAL 221.00
II. C - TRAINERS' QUALIFICATION lTQl
Qualification: I Landscape Installation and Maintenance (Soft Scape) NC II
Existing Amendment
• Must be a holder of Landscape Installation and • Must be a holder of NTTC Level I (NC II and TMC) on
Maintenance (Soft Scape) NC II or equivalent qualification Landscape Installation and Maintenance (Soft Scape) NC II
• Must have undergone training on Training Methodology 11 • Must be computer literate
(TM 11) or equivalent in training/experience • Must have at least 2 years job/industry experience within the
• Must be computer literate last five (5) years
• Must be a civil service eligible (for government position)
or holder of appropriate professional license issued by the
Professional Regulatory Commission

II A. LIST OF TOOLS I EQUIPMENT AND MATERIALS
Pest Tools Tools
Management Description Qty. Description Qty.
(Vegetables) NC Measuring cup 5 pcs Measuring cup 5 pcs
II Shove 10 pcs Shove 10 pcs
Light hoe 5 pcs Light hoe 5 pcs
Bolo 25 pcs Bolo 25 pcs
Harrow 1 pc
Animal-drawn plow 1 pc
Disc plow 1 pc
Cutting tools 5 pcs Cutting tools 10 pcs each
- Bolo
- Scythe
- Cutter
- Pruning shears
- Scissors
, Digging tools 5 sets Digging tools 10 pcs each
- Shovel
- Light hoe
Knife 5 sets Knife 5 sets
Pruning shears 5 pcs Pruning shears 5 pcs
Trowel 25 pcs Trowel 25 pcs
Sprinklers 25 pcs Sprinklers 25 pcs
Rake 15 pcs
Broomstick 10 pcs Broomstick/soft broom 10 pcs
Container 5 pcs Container/pail 5 pcs
Hat 25 pcs Hat 25 pcs
Storage tools/cabinet 2 pcs Storage tools/cabinet 2 pcs
Scissors 10 pcs Scissors 10 pcs
Calculator 5 pcs
Equipment Equipment
Knapsack sprayer 5 pcs Knapsack battery -operated 2 units
sprayer
Power sprayer 1pc
Mower 1unit
: Tractor/carabao 1 unit
Overhead projector/LCDprojector 1unit LCD projector/TV 1 unit
Computer 5 units Laptop 1 unit
Storage area 1 lot
Calculator 5 pcs
Materials Materials
vegetables 5 vegetables 5 different
different samples
samples
pests 5 pests 5 different
different samples
samples
repellant and trap crops 5 repellant and trap crops 5 different
different samples
samples
ben ficial organisms 5
different
samples
Catching nets 5 pcs Catching nets 5 pcs
Botanical pesticides Botanical pesticides 5 bottles
Fungicides 5
bottles
Insecticides 5
bottles
Cleaning agents (e.g. detergent, Liquid cleaning agents 2 liters each
soap) (e.g. alcohol, clorox, muriatic
acid)
Hand soap 2 bottles
(250ml)
Cloth 5 pcs Rags /handtowel 6 pcs
Mulching materials 5 sacks Plastic mulch 1 roll
Rice hull 3 sacks
Pail 5 pcs Pail 5 pcs
Rope 3 rolls
Agri bags, plastic 250 pcs
Marking pens 5 pcs Marking pens 5 pcs
Pens 25 pcs Pens 25 pcs
Pencils 25 pcs Pencils 25 pcs
Notebooks 25 pcs Notebooks 25 pcs
Bond paper 5 reams Bond paper 5 reams
Paper clips 3 Paper clips 3 dozens
dozens
First aide supplies/ medicine 1 kit First aide supplies/ medicine 1 kit
PPEs 25 sets
Hat
Protective
Eyewear
Rubber boots
Gloves
Mask
Hearing protection
Face shield
Face mask
11. B - TRAINING FACILITIES {TF)
Qualification : I Pest Management (Vegetables) NC II
Existing Amendment
3.5 TRAININGFACILITIES Space Size in Area in Total Grand
PESTMANAGEMEN(TVEGETABLES)NC II meters
Based on a class size of 25 studentsnrainees A. Permanent 205.30
Building
SPACE REQUIREMENT SIZEINMETER AREAIN SQ. TOTALAREA IN SQ. Lecture room
S METERS METERS
A B ildilg Learning
(permanent} resource
• Sb.JdenVTrainee 2.00x
· WorkinQSpace 2.00per 4.00per student 100.00 Store Room
student trainee Wash Room
• Lecture Room 7.00xS.00 35.00 35.00
• LeamingResource 3.00x5.00 15.00 15.00 Laboratory
Center(Librarv)
• Facifities/EquipmenU 39.30 B. Demo Farm Must have an existing 500.00
CirrulationAm vegetable farm of about 500
(30% of teaching
acrommodation)
sq.m(100 sq.m/veQetable)
• Store room 4.00x4.00 16.00 16.00
. Total 705.30
B. ExperimentalLand 5.00per student 125.00 125 00
Area(Vegetable lrainee Note: Access to and use of equipment/facilities can be provided
Farm)' area may vart depeMJ'lg on ambllly of land and t;pe of Yeget .
• Expelinentd through cooperative arrangements or MOA with other partner-
companies/institutions/private farms.
II. C - TRAINERS' QUALIFICATION lTQ)

Qualification: I Pest Management (Vegetables) NC II
Existing Amendment
• Must be a holder of Pest Management for Vegetables NC • Must be a holder of Must be holder of NTTC
II or its equivalent Level I (NC II and TMC) on Pest
• Must have undergone training on Training Methodology II Management for Vegetables NC II
{TM11) or equivalent in training/experience • Must be computer literate
• Must be computer literate • Must have at least 2 years job/industry
• Must be physically and mentally fit experience within the last five (5) years
• Must be a civil service eligible (for government position or
appropriate professional license issue by the
Professional Regulatory Commission)
* Optional: Only when required by the hiring institution
11 A - LIST OF TOOLS I EQUIPMENT AND MATERIALS
Rice Machinery Tools Tools
Operations NC II Description Qty Description Qty
Sets of Wrench - 36" Pipe Wrench - 5 Sets of Wrench - 36" Pipe Wrench 5
18" Pipe Wrench - 12" Adjustable - 18" Pipe Wrench -12" Adjustable
Wrench Wrench
Hammer 5 Hammer 5
Vice Grip 5 Vice Grip 5
Plier 5 Plier 5
Screw Driver 5 Screw Driver 5
Ballpeen 5 Ballpeen 5
Hammer 5 Hammer 5
Locking Plier 5 Locking Plier 5
Grease Gun 5 Grease Gun 5
Screw driver 2 Screw driver 2
Combination Wrench 1 Combination Wrench 1
Adjustable Wrench 1pc Adjustable Wrench 1pc
Tachometer 1pc Tachometer 1pc
Shovel 1pc Shovel 1pc
Wheel Barrow 1pc Wheel Barrow 1pc
Allen Wrench 1pc Allen Wrench 1pc
Moisture Meter 1pc Moisture Meter 1pc
Temperature Gauge 1pc Temperature Gauge 1pc
Screwdriver, philip, fiat Screwdriver, philip, fiat 2 pc
Pipe Wrench Pipe Wrench 2 pc
Portable grinder Portable grinder 2 pc
Portable drill Portable drill 2 pc
Arc electric welding Arc electric welding 1 pc
Oxy-acetylene outfit Oxy-acetylene outfit 1 pc
Equipment Equipment
Hand Tractor (Lowland & Upland) w/ 2 Hand Tractor (Lowland & Upland) 2 unit
Implements* w/ Implements*
Hydro/Turtle Tiller 2 Hydro/Turtle Tiller 2 unit
Rota Tiller 2 Rota Tiller 2 unit
4-Wheel Tractor W/ Implements* 1 4-Wheel Tractor W/ Implements* 1 unit
Reaper 2 Reaper 2 unit
Stripper 2 Stripper 2 unit
Combine harvester 1 Combine harvester 1 unit
Rice Thresher 2 Rice Thresher 2 unit
Knapsack Sprayer 5 Knapsack Sprayer 5 unit
Centrifugal Pump 2 Centrifugal Pump 2 unit
Cultivator 5 Cultivator 5 unit
Fertilizer Applicator 5 Fertilizer Applicator 5 unit
Pressure Gauge 2 Pressure Gauge 2 unit
Weighing Scale 2 Weighing Scale 2 unit
Computer 1 Computer 1 unit
LCD 1 LCD 1 unit
Screen Projector 1 Screen Projector 1 unit
Tachometer 2 Tachometer 2 unit
Moisture Meter 1 Moisture Meter 1 unit
Thermometer 2 Thermometer 2 unit
Seeder 2 Seeder 2 unit
Transplanter 2 Transplanter 2 unit
Weeder 5
Diesel engine 12.5hp 1 Diesel engine 9hp 1 unit
Furnace 1 Furnace 1 unit
Blower 1 Blower 1 unit
Rice mill (SinQle-pass, Multi-pass) 1 Rice mill (Single-pass, Multi-pass) 1 unit
Mechanical dryer (Batch-type, flash, 1 Mechanical dryer (Batch-type, 1 unit
Continuous) flash, Continuous)
Materials Materials
Fuel and Oil 20 ltr Fuel and Oil 20 ltr
Stop Watch 5 Stop Watch 5 pc
PPE: 25 PPE: 25
Protective Cap each Protective Cap each
Boots Boots
Dust Mask Dust Mask
Hand Gloves Hand Gloves
Earmuff Earmuff
Raincoat Raincoat
LonQ Sleeve Shirt LonQ Sleeve Shirt
Steel Tape Measure 5 Steel Tape Measure 5 pc
Empty Can, 20 ltrs. 25 Empty Can, 20 ltrs. 25 pc
Sack, 50kg 25 Sack,50kg 25 pc
Collecting Net 5 Collecting Net 5 pc
:
Pail 25 Pail 25 pc
Teflon Tape 3 Teflon Tape 3 pc
Grease 1 qt Grease 1 qt
Fertilizer 50kg Fertilizer 50kg
Suction Hose 1 Suction Hose 1 pc
Required set of pipe and connectors 1 set Required set of pipe and 1 set
connectors
Pesticide measuring cup 1 Pesticide measuring cup 1pc
Chemical 1 btl Chemical 1 btl
Seedlings 100 Seedlings 100
kgs kgs
Seeds 40kQS Seeds 40kgs
Diesel Fuel Diesel Fuel
Graduated Cylinder 1 Graduated Cylinder 1 pc
Engine Base 1 pair EnQine Base 1 pair
Rice Hull Rice Hull
Matches 1 Matches 1
Pack Pack
Bolt w/ nut 1/2x2 9 pcs. Bolt w/ nut 1/2x2 9 pcs.
..
:
Pulley 1 pc Pulley 1 pc
Belt 2 pcs. Belt 2 pcs.
Needle 1 pc Needle 1 pc
Twine Twine
Rice samples/seeds for Rice samples/seeds for
milling/drying milling/drying

AGRICULTURAL, FORESTRY AND FISHERY (AFF) SECTOR
Qualification: I Rice Machinery Operations NC 11
Existing Amendment
Space Size in Area Total Grand
3.5 TRAININGFACILITIES Requirement meters in Sq. area Total
RICE MACHINERY OPERATION NC II meters
A. Permanent
Building
SPACE
REQUIREMENT
SIZE IN
METERS
AREA IN SQ.
METERS
TOTAL AREA IN SQ.
METERS
Lecture room No Amendment
• Student!Trainee 2.()() X 2.00 per 4.00 per student 100.00
WorkinQ Space student/trainee Learning No Amendment
• Lecture Room 7.00X 5.00 35.00 35.00 resource
• Leaming 3.00X 5.00 15.00 15.00 Store Room 1.0 X 3.0 3.0 3.0
ResourceCenter
• Facilities/Equipm - - - Wash Room 2.0 X 3.0 6.0 6.0
ent/ Circulation
Area
• Farm 10x 20 200 200
B. Demo Farm
Machinery
Shed Farm 3.0 X 10.0 30.0 30.0
• Field Area - 10,000 10,000· machinery shed
N e: 'Access to and useTOTALAREA
of eqi.pment/facilities can be provided through 10.350
cooperative Field Area 15.0 X 150.0 150.0
arrangements of MOA with other partner-companiesf11stitutions.
(Simulation 10.0
area)
Total 239.0 239.0
Qualification: I Rice Machinery Operations NC II
Existing Amendment
• Must be a holder of BS Agricultural Engineering or its • Must be holder of NTTC Level I (NC II and TMC)
equivalent qualification on Rice Machinery Operations NC 11
• Must have undergone training on Training Methodology II • Must be a holder of BS Agricultural Engineering
(TM II) or any Engineering courses relevant to rice
• *Must be computer literate machinery operation
• Must be physically and mentally fit • Must be computer literate
• *Must have at least 2 years job/industry experience • Must have at least 2 years job/industry
• Must be a civil service eligible (for government position or experience within the last five (5) years
appropriate professional license issuedby the
*Optional. Only when required by the hiring institution.

Seaweeds Tools Tools
Production NC II Description Qty. Description Qty.
Knives 25 pc Knives 25 pc
Stainless steel table knife 13 pc Stainless steel table knife 13 pc
Basket (big) 10 pc Basket (big) 10 pc
Swimming fins 10 Swimming fins 10 pairs
pairs
Bolo 5 pc Bolo 5 pc
Cross cut saw 5 pc Cross cut saw 5 pc
Hand trowel 2 pc Hand trowel 2 pc
Hack saw 1 pc Hack saw 1 pc
Curve chisel 1" 4 pc Curve chisel 1" 4 pc
Claw hammer 4 pc Claw hammer 4 pc
Grinding stone 1 pc
Rushguard 10 pc Rushguard 10 pc
Battery Flashlight 3 pc Battery Flashlight 3 pc
rechargeable flashlight 3 pc rechargeable flashlight 3 pc
Paddle 2 pc Paddle 2 pc
Measuring tape 10 pc Measuring tape 10 pc
4" scissors 13 4" scissors 13 pairs
pairs
Ammonia and Nitrate test kit 1 set Ammonia and Nitrate test kit 1 set
Improvised Needle 5 pc Improvised Needle 5 pc
Calculator 5 unit Calculator 5 unit
Cleaning tools 5 set Cleaning tools 5 set
HOPE Floaters 500 pc HOPE Floaters 500 pc
20L Capacity Pails 2pc 20L Capacity Pails 2pc
Ordinary dippers 2pc Ordinary dippers 2pc
Fabricated Steel Anchors (Deep 12 pc Fabricated Steel Anchors (Deep 12 pc
Sea) Sea)
Sinkers (Boulders) 12 pc Sinkers (Boulders) 12 pc
Anchor 20 Anchor 20
Equipment Equipment
Refractometer (ppt) 1 unit Refractometer (ppt) 1 unit
Thermometer 1 unit Thermometer 1 unit
Depth gauge/ improvised 1 unit Depth gauge/ improvised 1 unit
measuring device measuring device
Global Positioning System 1 unit
Moisture Analyzer 1 unit Moisture Analyzer 1 unit
DDO Meter 1 unit DDO Meter 1 unit
PH meter(portable) 1 unit PH meter (portable) 1 unit
Weighing scale (capacity 200 kg) 1 unit Weighing scale (capacity 200 kg) 1 unit
500 K capacity hanging weighing 2 unit 500 K capacity hanging weighing 2 unit
scale scale
2-way radio 2 set
transistor radio 2 unit transistor radio 2 unit
Motorized Boat/ Banca (Capacity 2 unit Motorized Boat/ Banca (Capacity 2 unit
of 10 passengers) of 10 passengers)
Non-motorized boat with katig 2 unit
(Capacity of 3 passengers)
Engine (5-7 hp) 3 unit Engine (5-7 hp) 3 unit
Engine (Diesel) 3 unit Engine (Diesel) 3 unit
Cellphone 1 unit Cellphone 1 unit
Dummy mobile phone 5 unit Dummy mobile phone 5 unit
Materials Materials
PE Rope #18(9mm) 200m/roll 1 roll PE Rope #18(9mm) 200m/roll 1 roll
PE Rope #16(8 mm) 1 roll PE Rope #16(8 mm) 1 roll
PE Rope #10 (5mm) 200m/roll 4 roll PE Rope #10 (5mm) 200m/roll 4 roll
PE rope #7 5 roll PE rope #7 5 roll
PE Rope #5 (2.5mm) 200m/roll 14 roll PE Rope #5 (2.5mm) 200m/roll 14 roll
Soft tie straw (600g) 3 roll Soft tie straw (600g) 3 roll
Straw (for tying) 50 m Straw (for tying) 50 m
Seedlings/ Seaweed cuttings 1,500 Seedlings/ Seaweed cuttings 1,500 kg
kg
5x5m Canvass/ cover 3 pc 5x5m Canvass/ cover 3 pc
100pp Record book 5 pc 100pp Record book 5 pc
Sand 0.25m3
Gravel 0.25m3
Cement 5 bag
Monofilament net 1 Monofilament net 1 bundle
bundle
50 K capacity native baskets 13 pc 50 K capacity native baskets 13 pc
Empty sacks 100 pc Empty sacks 100 pc
Wooden stake 1m 20 pc Wooden stake 1m 20 pc
Bamboo (10 m) 10 pc Bamboo (10 m) 10 pc
Steel bar (12 mm) 2 pc Steel bar (12 mm) 2 pc
Fuel 30 liter Fuel 30 liter
Lubricants 2 liter Lubricants · 2 liter
Empty cans ( 20 Liters) 10 pc Empty PET bottles ( 20 Liters) 10 pc
Mono nylon # 200 2 kg
Hard rock (medium) 4 pc Hard rock (medium) 4 pc
Sticks (wooden) (2 inches dia. , 2000 Sticks (wooden) (2 inches dia. , 2000 pc
1mts. Length) pc 1mts. Length)
Full length Bamboo (raft method) 100 pc Full length Bamboo (raft method) 100 pc
Polarex Screens 1 roll Polarex Screens 1 roll
Rattan Basket\Buri 25 pc Rattan Basket\Buri 25 pc
Basket (big) 10 pc Basket (big) 10 pc
5x5m canvass/ cover 3 pcs 5x5m canvass/ cover 3 pcs
Net (recycled) 1 bail Net (recycled) 1 bail
Pentelpen 1 box Pentelpen 1 box

Ballpen 1 box Ballpen 1 box
Garbage bag 2 pack Garbage bag 2 pack
Wooden pallet (4 ft.x4 ft.) 4 unit Wooden pallet (4 ft.x4 ft.) 4 unit
Canvass 1 roll Canvass 1 roll
Sampling bags 25 pc Sampling bags 25 pc
Ledger 5 pc Ledger 5 pc
White board marker 1 set White board marker 1 set
Eraser 1 pc Eraser 1 pc
PPEs * *gloves, goggles, face 25 set PPEs 25 set
mask, snorkel, boots, paddle, * *gloves, goggles, face mask,
flippers/swimming fins, hat, life snorkel, boots, paddle,
vest and booties flippers/swimming fins, hat, life
vest and bootie, face mask, face
shield
Alcohol 2 bottle
(500 ml)
11 B - TRAINING FACILITIES (TF)
Qualification : I Seaweed Production NC II
Existing Amendment
3.5 TRAINING FACILITIES Space Size in Area in Total Grand
Based on a class size of 25 students/trainees.
meters
TOTAL GRAND
SIZEIN AREAi SQ. AREA TOTAL AREA A. Permanent 78
SPACE REQUIREMENT
METERS METERS IN SQ.
METERS
INSQ.
METERS
Building
A. Bulldlna (oermanent) 98 Lecture room 5X8 40
Lecture room 5x6 30
Learning No Amendment
labo(atory area 3x4 12 resource
Tool room & SIM SU>rage
area
4 x4 16 16 Store Room No Amendment
leanmQ resouroe area 5x6 30 30 Wash Room No Amendment
Wash area'comlort room 2.5x4 10 10
(male& femalel B. 2,550
B. Experimental Fann
Area
3,850
Experimental
• Seaweed Farm 2,500 Farm Area
• Nll'Sery area (Seaweed 1,250
nursery area) Seaweed Farm No Amendment
• DrviMarea 10x10 100
Total womhoo area 3 948 Nursery Area No Amendment
NOTE: Accell lO and use of equlpntnt ITldltia ain bt providedduough a,optf1IIM Drying Area 50
atrangtmtnts 0< MOA ot11tt pannet· farm companlts.
Total 2,628
II. C - TRAINERS' QUALIFICATION {TQ)

Qualification: I Seaweed Production NC II
Existing Amendment
• Must be a holder of National TVET Trainer Certificate
(NTTC) Level I in Seaweed Production NC II or holder of • Must be a holder of National TVET Trainer
bachelor's degree relevant to the qualification (e.g. Certificate (NTTC) Level I in Seaweed Production
Marine Biology or Fisheries) with National Certificate on NC II
Trainers Methodology I (TMI) • At least two (2) years industry experience for the
• At least two (2) years industry experience for the last five last five (5) years
(5) years
Sugarcane Tools Tools
Production NC 11 Description Qty. Description Qty.
40 meter steel tape 5 pc 40 meter steel tape 5 pc
Tally counter 5 pc Tally counter 5 pc
Measuring tape 5 pc Measuring tape 5 pc
Diooing tools 5 pc Diooing tools 5 pc
Soil auger 5 pc Soil auger 5 pc
Spade 10 pc Spade 10 pc
Trash rake 5 pc Trash rake 5 pc
Hammer 5 pc Hammer 5 pc
Saw 5 pc Saw 5 pc
Crow bar 5 pc Crow bar 5 pc
Cane cutting tools 5 pc Cane cutting tools 5 pc
Cane knives 10 pc Cane knives 10 pc
Cutting tools 5 pc Cutting tools 5 pc
"tama" 5 pc "tama" 5 pc
Bolo/scythe 5 pc Bolo/scythe 5 pc
Whetstone 5 pc Whetstone 5 pc
Bastard file 5 pc Bastard file 5 pc
Mixing tools 10 pc Mixing tools 10 pc
Sharpening stone 5 pc Sharpening stone 5 pc
Soaking tank 5 pc Soaking tank 5 pc
Stirrer 10 pc Stirrer 10 pc
Drum 1 pc Drum 1 pc
Hoe 10 pc Hoe 10 pc
Rake 5 pc Rake 5 pc
Improvised rakes for farming 10 pc Improvised rakes for farming 10 pc
Moisture tester 5 pc Moisture tester 5 pc
Fertilizer application tools 5 pc Fertilizer application tools 5 pc
Steel brush 5 pc Steel brush 5 pc
Wooden stirrer 5 pc Wooden stirrer 5 pc
Measuring container 10 pc Measuring container 10 pc
Measuring spoon 5 pc Measuring spoon 5 pc
Filtering materials 5 pc Filtering materials 5 pc
Hand refractometer 2 unit Hand refractometer 2 unit
Juice extractor 2 unit Juice extractor 2 unit
PPE PPE
Mask/facemask 25 pc Mask/facemask 25 pc
Gloves 25 pc Gloves 25 pc
Long Sleeves 25 pc Long Sleeves 25 pc
Googles 25 pc Googles 25 pc
Rubber Boots 25 pc Rubber Boots 25 pc
Hats 25 pc Hats 25 pc
Cover All 25 pc Cover All 25 pc
Sugarcane Whole Stalk Cutter 5 pc
Equipment Equipment
Camera with memory card 1 unit Camera with memory card 1 unit
Mobile phone 1 unit Mobile phone 1 unit
GPS 5 units GPS 5 units
Water pump 1 unit Water pump 1 unit
Irrigation system and facilities 1 unit Irrigation system and facilities 1 unit
Kanpsack sprayer 5 units Kanpsack sprayer 5 units
Standing manual rain gauge 1 unit Standing manual rain gauge 1 unit
Weighing scale 5 units Weighing scale 5 units
Bull cart 1 unit Bull cart 1 unit
Carabao /cattle/ farm animal 5 units Carabao /cattle/ farm animal 5 units
Carabao plow 5 units Carabao plow 5 units
Carabao harrower 2 units Carabao harrower 2 units
Cattle or carabao drawn 5 units Cattle or carabao drawn 5 units
implements implements
Hauling vehicle 1 unit Hauling vehicle 1 unit
Service vehicle 1 unit Service vehicle 1 unit
Fertilizer drill 5 units Fertilizer drill 5 units
Mechanical stubble shaver 1 unit Mechanical stubble shaver 1 unit
Steel cabinet 1 unit Steel cabinet 1 unit
Mega phone 1 unit Mega phone 1 unit
Mini tractor 35HP with cultivator 1 unit
Materials Materials
Bamboo sticks 250 pcs Bamboo sticks 250 pcs
Bamboo poles 20 pcs Bamboo poles 20 pcs
Bamboo stake 50 pcs Bamboo stake 50 pcs
1kg capacity plastic bags 1 set 1kg capacity plastic bags 1 set
Sacks 5 pcs Sacks 5 pcs
Canvas/used sacks 10 pcs Canvas/used sacks 10 pcs
Trash bags 5 pcs Trash bags 5 pcs
Used sacks 45 pcs Used sacks 45 pcs
Pail 10 pcs Pail 10 pcs
Plastic Pails 10 pcs Plastic Pails 10 pcs
Plastic twine 6 rolls Plastic twine 6 rolls
Container for fertilizer 5 pcs Container for fertilizer 5 pcs
application application
Labels/tag 30 pcs Labels/tag 30 pcs
Clipboard 5 pcs Clipboard 5 pcs
Pens 5 pcs Pens 5 pcs
Marking pens 5 pcs Marking pens 5 pcs
Clipboard 5 pcs Clipboard 5 pcs
Pencil/ballpen 25 pcs Pencil/ballpen 25 pcs
Record book 25 pcs Record book 25 pcs
Replanting materials 200 pcs Replanting materials 200 pcs
Planting materials of different 60 sacks Planting materials of different 60 sacks
varieties varieties
Planting materials 4000 Kind of Planting materials 4000
cane cane
points points
Bagging materials 20 pcs Bagging materials for micro 20 pcs
plantlets
Plastic bags 25 pcs Plastic bags for soil sample 25 pcs
Mixing container 5 pcs Mixing container .5 pcs
Carton boxes 5 pcs Carton boxes 5 pcs
Tarpauline 5 pcs Tarpauline 5 pcs
Sand paper 25 pcs Sand paper 25 pcs
Plastic twine 1 roll Plastic twine 1 roll
Stalk samples 15 pcs Stalk samples 15 pcs
Used oil 1 liter Used oil 1 liter
Fuel 10 liters Fuel 10 liters
Lubricants 1 liter Lubricants 1 liter
Treatment materials 5 bags Seed Treatment materials 5 bags
Chemical pesticide For 0.1 Chemical pesticide/ Biological For 0.1
ha control ha
Agricultural lime 5 bags Agricultural lime 5 bags of
of 40kg/bag
40kg/bag
Soil amendments 5 bags of Soil amendments 5 bags of
40kg/bag .40kg/bag
NPK fertilizer Inorganic /Organic Fertilizer
Bioagent 5 sets Bioagent 5 sets
Surfactant 1 liter Surfactant 1 liter
Disinfectant (for cutting edges 1 liter Disinfectant (for cutting edges 1 liter
of tools) of tools)
Anti-rust 1 liter Anti-rust 1 liter
Water 200 liters Water 200 liters
Plastic crate 5 pc
II. B · TRAINING FACILITIES lTF)
Qualification : I Sugarcane Production NC 11
Existing Amendment

No Amendment
SUGARCANE PRODUCTION NC II
Basedon a class size of 25 students/trainees
TOTAL
AREA IN GRAND TOTAL
SIZE IN AREA IN AREA IN SQ.
SPACE REQUIREMENT SQ.
METERS SQ. METERS
METERS METERS
A. Building (permanent) 165
• Student/Trainee 2. 00x 1.00 per 2.00 50.00
Working Space student/trainee per
student
• Leaming 3.00 xS.00 15.00 15.00
Resource Center
• Activity Room 2.00x 3.00 6.00 per 150.00
(induding facilities, trainee
wash room, and
store room)
B. Demo Fann 5000
• Nurseryarea 10 X 10 100 per 2.500
per trainee
trainee
• Field Plot 2,500
TOTAL
NOTE: Access to and use of equipment /facilitiescan be provided through cooperative 5165
arrangements or MOA wllh other partner-companies/Institutions.
3.6TRAINER'S QUALIFICATIONS FOR AGRICULTURE, FORESTRY AND FISHERY

SECTOR .SUGARCANE PRODUCTION NC II
Must be a holder of NTTC Level I in Sugarcane ProductionNC II

• Must have at least 2 years' job/industry experiencefor the last five (5) years
II. C • TRAINERS' QUALIFICATION lTQ)

Qualification: I Sugarcane Production NC 11
Existing Amendment
• Must be a holder of NTTC Level I in Sugarcane
Production NC II
No Amendment
• Must have at least 2 years' job/industry experience for
the last five (5) years
11 A- LIST OF TOOLS I EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Tools Tools
Heavy Equipment Description Qty. Description Qty.
Servicing Wrenches (box and open-end 8- 5 sets Wrenches (box and open-end 8-36 5 sets
(Mechanical) NC 24 mm- metric & 7/16 -1" -English mm- metric & 7/16 -1" -English )
II )
Hammer ballpeen (3-4 lbs) 5 Hammer ballpeen (3-4 lbs) 5
sets sets
Sledge hammer 8 lbs. 2pcs. Sledge hammer 8 lbs. 2pcs.
Pliers( mechanical 10
11
Pliers( mechanical 10 ") 5 sets ) 5 sets

Adjustable wrench (18 Adjustable wrench (18
11 11
pcs ) ) pcs
Adjustable wrench 10" 5pcs. Adjustable wrench 1O" 5pcs.
Grease gun 2 Grease gun 2
pcs. pcs.
Screw driver ( 10 flat & Philips) 5 Screw driver ( 10 flat & Philips) 5
11 11
sets sets
Putty knife 5 Putty knife 5
pcs. pcs.
Socket wrench½" drive (8- 32 mm Socket wrench ½" drive (8- 32 mm Or
Or English equivalent) 3 sets English equivalent) 3 sets
Socket wrench¾" drive (30- 60 Socket wrench ¾" drive (30- 60 mm 3 sets
mm Or English equivalent) 2 sets Or English equivalent)
Socket wrench 1" drive (22- 60 Socket wrench 1" drive (22- 60 mm 3 sets
mm Or English equivalent) 2 sets Or English equivalent)
Allen wrench L- type (4-17 mm or 2 sets Allen wrench L- type (4-17 mm or 3 sets
English equivalent) English equivalent)
Torque multiplier ¾ drive with 1 pc. Torque multiplier¾ drive with 1 pc
11 11
(Mechanical Advantage X4) (Mechanical Advantage X4) capacity

10-50 klg. meter
Torx wrench 1 pc. Torx wrench 1 pc.
½ drive (12-19 mm or English
11
.
½ drive (12-19 mm or English
11
equivalent)
equivalent) cap. 5 kg. mtr-20 klg.
meter
Allen wrench socket type (12- 27 2 sets Allen wrench socket type (12- 27.mm 2 sets
mm or English equivalent) or English equivalent)
Filter wrench 5 pcs. Filter wrench 5 pcs.
Hacksaw 5 pcs. Hacksaw 5.pcs.
Pry bar (heavy duty) 3 pcs. Pry bar (heavy duty) 3 pcs.
Pipe wrench (12") 5pcs. Pipe wrench (12") 5pcs.
Vise grip (12 5 pcs. Vise grip (12
11 11
) ) 5 pcs.
Torque wrench ½" drive (0-30 1 pc. Torque wrench½" drive (0-30 kg.Im) 1 pc.
kg.Im)
Torque wrench ¾" drive (0-70 1 pc. Torque wrench ¾" drive (0-70 1 pc.
kg.Im) kg.Im)
Thermometer 2 sets Thermometer 2 sets
Tachometer 2 set Tachometer 2 set
s s
Timing tool 2 sets Timing tool 2 sets
Caliper (inside & outside) 2 sets Caliper (inside & outside) 2 sets
Micrometer caliper 2 sets Micrometer caliper 2 sets
Vernier caliper 2 sets Vernier caliper 2 sets
Cylinder gauge 1 set Cylinder gauge 1 set
Compression tester 1 set Compression tester 1 set
Blow by tester 1 set Blow by tester 1 set
Hydraulic pressure gauge 1 set Hydraulic pressure gauge 1 set
Vacuum tester 1 set Vacuum tester 1 set
Multi- scale tester for 1 set Multi- scale tester for undercarriage 1 set
undercarriage
Straight edge rule (1 Meter) 1 pc Straight edge rule (1 Meter) 1 pc
Stop watch 1 pc Stop watch 1 pc
Feller gauge 2 sets Feller gauge 2 sets
Torque multiplier 1 " drive with 1 pc.
(Mechanical Advantage) cap. 40-80
Equipment Equipment
Heavy Equipment Mechanic 1 unit Heavy Equipment (MOA/Rental) ex. 1 unit
ll(MOA /rental) Hydraulic Excavator
Hydraulic/air impact wrench 1 unit Hydraulic/air impact wrench 1 unit
High pressure washer 1 unit High pressure washer 1 unit
Portable electric air compressor 1 unit Portable electric air compressor 1 unit
Hydraulic tools for undercarriage 1 set Hydraulic tools for undercarriage 1 set
Chain block with "A" frame (3 1 set Chain block with "A" frame (3 tons) 1 set
tons)
Transmission undercarriage jack 1 unit. Transmission undercarriage jack (5 1 unit.
(5 tons) tons)
Crocodile jack 1 unit Crocodile jack 1 unit
( 5 tons) ( 5 tons)
Hydraulic vertical jack ( 10 tons) 1 unit Hydraulic vertical jack ( 10 tons) 1 unit
Hydraulic press (20 tons) 1 unit Hydraulic press (20 tons) 1 unit
Parts cleaner 1 unit Parts cleaner 1 unit
Pallet truck (5 tons) 1 unit Pallet truck (5 tons) 1 unit
Working bench with attached 5 Working bench with attached vises 5
vises units units
Bench grinder 1 unit Bench grinder 1 unit
Drill press 1 unit Drill press 1 unit
Vertical hydraulic test bench 1 unit Vertical hydraulic test bench 1 unit
Injection pump calibration stand 1 unit Injection pump calibration stand with 1 unit
' with nozzle injector tester nozzle injector tester
Engine dynamometer 1 unit Engine dynamometer 1 unit
Valve spring tester 1 unit Valve spring tester 1 unit
Engine stand 1 unit Engine stand 1 unit
Materials Materials
Multi-purpose grease 10 Multi-purpose grease 10
kls. kls.
Engine oil (SAE 15W40) 50 Engine oil (SAE 15W40) 50
liters liters
Diesel fuel 200 Diesel fuel 200
liters liters
Penetrating oil (250 ml) 2 Penetrating oil (250 ml) 2
cans cans
Cotton rugs 20 Cotton rugs 20
kls. kls.
Cleaning solvent 5 Cleaning solvent 5
liters liters
Hydraulic / steering fluid (TELLUS 50 Hydraulic/ steering fluid (TELLUS 50
68/10W) liters 68/10W) liters
Final drive/differential (gear oil 20 Final drive/differential (gear oil 20
GP90/140) liters GP90/140) liters
Transmission oil (ATF) 20 Transmission oil (ATF) 20
liters liters
.Shop work cleaning tool(one each Shop work cleaning tool(one each
kind) 1 set kind) 1 set
Working clothes 25 Working clothes 25
pairs pairs
Safety shoes 25 Safety shoes 25
pairs pairs
Gloves 25 Gloves 25
pairs pairs
Goggles 25 Goggles 25
pairs pairs
Shop repair manual 5 pcs Shop repair manual 5 pcs
Hard hat 25 Hard hat 25
pcs pcs
CONSTRUCTION SECTOR
Qualification : Heavy Equipment Servicing (Mechanical) NC II
Existing Amendment
SPACE SIZEIN AREA TOTAL

REQUIREMENT METERS INSQ. AREA
METERS INSQ.
METERS
1
Student/Trainee s 100.0
Working Space
Lecture Room 48,0
i .o Learning Resource 24,0
Center
Tool/storeroom 12,0
184,0
Area
Facilities/Equipment/ - - 100
TOTAL WORK AREA Circulation Area
TOTAL WORK AREA 284,0
II. C -AMENDMENT TRAINERS QUALIFICATION (TQ)

CONSTRUCTION SECTOR
Qualification : I Heavy Equipment Servicing (Mechanical) NC II
Existing Amendment
• fy1ust bea holder of NC 111 Heavy Equipment Servicing • Holder of National TVET Trainer Certificate LevelI
(Me hanical)
(NTTC Level I) in Heavy Equipment Servicing
• Must have undergone training on Training (Mechanical) NC 11
Methodology 111 (TM 111)
• Must be physically fit
• Must have completed the 40-Hour Construction
• Must be a civil service eligible (for government position Occupational Safety and Health (COSH) per Department
or appropriate professional license issued by the Order No. 13 s. 1998, Guidelines Governing
Professional Regulatory Commission) Occupational Safety and Health in the Construction
Industry conducted by OSHC and DOLE accredited
Safety Training Organizations
11 A- LIST OF TOOLS' EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Qualmcation Existing TEM Amended TEM
Tools Tools
HEO Description Qty. Description Qty.
(Articulated Standard mechanical hand tools 2 sets Standard mechanical hand tools 2 sets
Off-Highway Grease gun 2 pcs. Grease gun 2 pcs.
Dump Truck) Mask 25 pcs. Mask 25 pcs.
NC II Goggles 25 pairs Goggles 25
pairs
Safety helmet 25 pcs. Safety helmet 25 pcs.
Safety vest 25 pcs. Safety vest 25 pcs.
Hand pump 2 pcs. Hand pump 2 pcs.
Voltmeter pump 2 pcs. Voltmeter pump 2 pcs.
Equipment Equipment
Description Qty. Description
Off Highway Dump Truck 2 units Off Highway Dump Truck 2 units
(Articulated) (Articulated)
Water pressure washer 1 unit Water pressure washer 1 unit
Wheel loader 1 unit ---
Air compressor 1 unit Air compressor 1 unit
Materials Materials
Grease 25 kls. Grease 25 kls.
Diesel oil 1600 Diesel oil 1600
liters liters
Waste rags 25 kls Waste rags 25 kls
Hydraulic oil 40 liters Hydraulic oil 40
liters
Distilled water 10 liters Distilled water 10
liters
CONSTRUCTION SECTOR
Qualification : HEO (Articulated Off-Highway Dump Truck) NC II
Existing Amendment
3.5 TRAINING FACILITIES '.ti

The off-highway dump truck (articulated) operation workshop must be of REQUIREMENT METERS INSC1 AREA
concrete structure. Based on class size of 25 students/trainees the METERS IN S(1
space requirementsfor the teachingnearningand circulationareas are as
follows: METERS
SPACE REQUIREMENT SIZE IN METERS AREA IN QTY TOTAL Lecture Are a 48.0
SQ. AREA IN Learning Re 24.0
METERS SQ.
METERS source Area
• Lecture area 8.0x 6.0 meters 48M2 1 48M2 Tool room/Storage 9.0
• Learninq resource area 4.0x 6.0 meters 24M2 1 24M2 area
• Tool room/ Storaqe area 3.0x 3.0meters 9M2 1 9M2
• Wash,toilet andlocker 8.0x 4.0meters 32M2 1 32M2 Wash, toilet and 32.0
I
room locker room
TOTAL 113M2 TOTAL 113.0
Facilities/ Equipment/ 5,000M2 Facilities/Equipment/ 2000.0
Circulation*
TOTAL AREA 5,113M2 Circulation Are a
TOTAL AREA 2113.0
Area requirement is equivalent to 30 percent of total teaching/learning areas r;
*Training area (practice) (MOA)

CONSTRUCTION SECTOR
Qualification : I HEO (Articulated Off-Highway Dump Truck) NC II
Existing Amendment
• Must be a holder of Heavy Equipment Operation • Holder of National TVET Trainer Certificate Level I
(Articulated off-highway dump truck) NC-II (NTTC Level I) in HEO (Articulated Off-Highway Dump
• Must have undergone training on Training Methodology Truck) NC II
Ill (TM Ill) or its equivalent
• Must be physically and mentally fit • Must be physically fit
• Must have at least 5 years job/industry experience* • Must have at least 5 years job/industry experience

Occupational Safety and Health (COSH) per
Department Order No. 13 s. 1998, Guidelines
Governing Occupational Safety and Health in the
Construction Industry conducted by OSHC and DOLE
accredited Safety Training Organizations
CONSTRUCTION SECTOR
Qualification · Existing TEM Amended TEM
Tools Tools
Standard mechanical hand tools 2 sets Standard mechanical hand tools 2 sets
HEAVY Grease gun 2 pcs. Grease gun 2 pcs.
EQUIPMENT Mask 25 pcs. Mask 25 pcs.
OPERATION Goqqles 25 pcs Safety Goqqles 25 pcs
(Backhoe Safety helmet 25 pcs. Safety helmet 25 pcs.
Loader) NCII Safety vest 25 pcs. Safety vest 25 pcs.
Fire Extinguisher 2 pcs. Fire Extinguisher 2 pcs.
Voltmeter pump 2 pcs. ---
Equipment Equipment
Backhoe Loader 2 units Backhoe Loader 2 units
Water pressure washer 1 unit ---
Air compressor 1 unit ---
Materials Materials
Grease 25 kls. Grease 25 kls.
Diesel oil 800 Diesel oil 800 liters
liters
Rags 25 kls. Rags 25 kls.
Engine oil 15Iiters Engine oil 15Iiters
Hydraulic oil 15 liters Hydraulic oil 15 liters
Fluid 1 liter Fluid 1 liter
Distilled water 5 liters Distilled water 5 liters
CONSTRUCTION SECTOR
I
Qualification: HEAVY EQUIPMENT OPERATION (Backhoe Loader) NCII
Existing Amendment

The backhoe loader operation workshop must be of concrete structure.
Based on class size of 25 students/trainees the space requirements for the
teaching/learning and circulation areas are as follows:
No Amendments
SPACE REQUIREMENT SIZE IN METERS AREA IN QTY TOTAL
SQ. AREA
METERS IN SQ.
METERS
• Lecture area 8.0 x 6.0meters 48M2 1 48M2
• Leaming resource area 4.0 x 6.0meters 24M2 1 24M2
• Tool room / Storaoe area 3.0 x 3.0meters 9M2 1 9M2
• Wash, toilet and locker 8.0 x 4.0 meters 32M2 1 32M2
room
TOTAL - - 113M2
Facilities/ Equipment/ - 1,000M2
Circulation"
TOTAL AREA 1113M2
Area requirenumt is equiValent to 30percent of total teaching I learningareas
*Training area �Q (l•fOA)
II. C - PROPOED TRAINER QUALIFICATIONS (TQ)
CONSTRUCTION SECTOR
Qualification : I
HEAVY EQUIPMENT OPERATION (Backhoe Loader) NC II
Existing Amendment
• Holder of National TVET Certificate Level I (NTTC

Level I) in HEO (Backhoe Loader) NC II
• Must be a holder of Heavy Equipment Operation • Must be physically fit
(Backhoe Loader) NC 11
• Must have at least 5 years job/ industry
• Must have undergone training on Training experience
Methodology Ill (TMIll) or its equivalent
• Must have completed the 40-Hour
• Must be physically and mentally fit Construction Occupational Safety and Health
(COSH) per Department Order No. 13 s. 1998,
• Must have at least 5 years job/industry experience* Guidelines Governing Occupational Safety and
Health in the Construction Industry conducted
by OSHC and DOLE accredited Safety Training
Organizations
CONSTRUCTION SECTOR
Tools Tools
HEO (Bulldozer) Description Qty. Description Qty.
NC II Wrenches (box and open-end 1 set Standard mechanical hand 2 sets
8-24 mm- metric & 7/16 -1" -English ) tools
Hammer ballpeen (3-4 lbs) 1 set ---
Pliers (mechanical 10") 1 set ---
Adjustable wrench (18 ") 1 pc ---
Grease gun 1 pc ---
Screw driver ( 10 "flat & Philips) 1 set ---
Putty knife 1 pc ---
Pry bar (heavy duty) 1 pc ---
Pipe wrench (12") 1 pc ---
Vise grip (12 ") 1 pc ---
Hard hat 25 pcs.
Ear guards 25 pcs.
Safety shoes 25 pairs
Plier 2 pcs.
Fire extinguisher 1 unit
Eye goggles 25 pcs.
Cover alls 25 pcs.
Pressure gauge 1 set
Equipment Equipment
Bulldozer(MOA / rental) 1 unit Bulldozer(MOA / rental) 1 unit
Low bed trailer with tractor head & 1 unit Low bed trailer with tractor head 1 unit
operator (MOA/rental) & operator (MOA/rental)
Vacuumcleaner 1 unit Vacuum cleaner 1 unit
Materials Materials
Multi- purpose grease 5 kls Multi- purpose grease 5 kls
Engine oil ( SAE 15w40) 4 Engine oil ( SAE 15w40) 4 liters
liters
Hydraulic / steering fluid (TELLUS 20 Hydraulic / steering fluid 20 liters
68/10W) liters (TELLUS 68/1OW)
Final drive / differential (gear oil GP90/ 10 Final drive / differential (gear oil 10 liters
.140) liters GP90/ 140)
Transmission oil (ATF) 10 Transmission oil (ATF) 10 liters
liters
Water coolant 4 Water coolant 4 liters
liters
Diesel fuel 200 Diesel fuel 200 liters
liters
Battery distilled water 5 pcs Battery distilled water 5 pcs
Primary & secondary air filter 1 set Primary & secondary air filter 1 set
Primary & secondary fuel filter 1 set Primary & secondary fuel filter 1 set
Water separator 1 pc Water separator 1 pc
Belts (air-con, water pump and 1 set Belts (air-con, water pump and 1 set
alternator) alternator)
·Penetrating oil (250 ml) 2 Penetrating oil (250 ml) 2 cans
cans
Cotton ruqs 2 kilos Cotton rugs 2 kilos
Cleaning solvent 5 Cleaning solvent 5 liters
liters
Cleaninq tool (one each kind) 1 set Cleaning tool (one each kind) 1 set
Working clothes 1 pair ---
Safety shoes 10 ---
pairs
Gloves 10 ---
pairs
Goggles 10 ---
PCS
Dust Mask 10 ---
pcs
Hard hats 10 ---
pcs
Operator'smanual 1 pc Operator's manual 1 pc

CONSTRUCTION SECTOR
Qualification : HEO (Bulldozer) NC II
Existing Amendment

SPACE REQUIREMENT SIZE IN METERS AREA IN SQ. TOTAL AREA IN
METERS SQ. METERS
METERS INSQ.
• S!udentrrrainee'sWorking 2.0x2.0 m. 4 100.0sq.m. METERS
Space sq.mper Stude nt/f raine e's 100.0
s!uden! WorkingSpace
• LectureRoom 8.00X 6.00 48.00 48.0 Lecture Room 48.0
• LearningResourcCeente 4.00X 6.00 24.00 24.0 Learning Re source 24.0
r Center
172 172.0
• Facili!ies/EquipmenU 52 Facilities/Equipment/ 1000.0
CirculauonArea Circulation Are a
TOTAL WORK AREA 224 TOTAL WORK AREA 1172.0
Workine:fieId 1.113.0
r;;
II C -AMENDMENT TRAINERS QUALIFICATION (TQ)
CONSTRUCTION SECTOR
Qualification : l
HEO (Bulldozer) NC II
Existing Amendment
• Must be a holder of Heavy Equipment • Holder of National TVET Trainer Certificate Level I
Operation (Bulldozer) NC II or similar/equivalent (NTTC Level I) in HEO (Bulldozer) NC II
qualification
• Must have undergone training on Training • Must be computer literate
Methodology II (TM II) or equivalent in • Must be physically fit
training/experience
• Must have at least 5 years job/industry experience*
• Must be comput r literate
• Must be phy ically and mentally fit Occupational Safety and Health (COSH) per
• Must have at least 5 years job/industry experience* Department Order No. 13 s. 1998, Guidelines
• Must be a civil service eligible (for government Construction Industry conducted by OSHC and DOLE
position or appropriate professional license issued by accredited Safety Training Organizations
the Professional Regulatory Commission)
CONSTRUCTION SECTOR
Tools Tools
HEO (Concrete Description Qty. Description Qtv.
Pump) NC II Standard mechanical hand tools 2 sets Standard mechanical hand tools 2 sets
Hard hat 25 pcs. Hard hat 25 pcs.
Ear guards 25 pcs. Ear guards 25 pcs.
Safety shoes 25 pairs Safety shoes 25 pairs
Plier 2 PCS. Plier 2 pcs.
Eye goggles 25 pcs. Eye goggles 25 pcs.
Cover alls 25 pcs. Cover alls 25 pcs.
Eye goqqles 25 pcs. Eye goqqles 25 PCS.
Pressure gauge 1 set Pressure gauge 1 set
Hammer 5 pcs. Hammer 5 pcs.
Blunt chisel 5 pcs. Blunt chisel 5 PCS.
Equipment Equipment
Two-way radio 2 pcs Two-way radio 2 pcs
Concrete Pump 1 unit Type of concrete pump stationary 1 unit
or trailer and Trackmounted
Materials Materials
Sponge ball (soft) 3 units Soonqe ball (soft) 3 units
Sponge ball (hard) 3 units Sponqe ball (hard) 3 units
Ready mixed concrete* Ready mixed concrete*
Water 500 Water 500
liters liters
Engine oil 18 liters Engine oil 18 liters
liters liters
Forming grease 10 kilos Forming grease 10' kilos
Suction filter 3 pcs. Suction filter 3 pcs.
Air filter 2 pcs. Air filter 2 pcs.
Waste rags 25 kilos Waste raqs 25.kilos
CONSTRUCTION SECTOR
Qualification : I HEO (Concrete Pump) NC II
Existing Amendment
;
SPACE REQUIREMENT SIZE IN METERS AREA IN QTY TOTAL

SQ. AREA
METERS IN SQ.
METERS
• Lecture area 8.0 x 6.0 meters 48M2 1 48M2 No Amendments
• Learning resource area 4.0 x 6.0 meters 24M2 1 24M2
• Tool room / Storage area 3.0 x 3.0 meters 9M2 1 9M2
• Wash,toilet and locker 8.0 x 4.0 meters 32M2 1 32M2
room
TOTAL - - 113M2
Facilities / Equipment/ - 1,000M2
Circulation*
TOTAL AREA 1,113M2
&--- ---••=-----":'_ --••!••-'--'- .&.- 1\1\ ------.&. - &-.&.-1 •---L:-- I 1---=--
----

CONSTRUCTION SECTOR
Qualification : I HEO (Concrete Pump) NC II
Existing Amendment
• Must be a holder of Heavy Equipment Operation • Holder of National TVET Trainer Certificate Level I (NTTC
(Concrete Pump) NC II Level I) in HEO (Concrete Pump) NC II
• Must have undergone training on Training
Methodology Ill (TM Ill) or its equivalent
• Must be physically and mentally fit • Must have at least 5 years job/industry experience*
• Must have at least 5 years job/industry experience*
Occupational Safety and Health (COSH) per Department
position only)
Order No. 13 s. 1998, Guidelines Governing Occupational
Safety and Health in the Construction Industry conducted
Organizations
11 A- LIST OF TOOLS, EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Tools Tools
HEAVY EQUIPMENT Description Qty Description Qty
OPERATION (Container Wrenches (box and open-end 8-24 1 set Standard mechanical hand 2 sets
Stacker) NCII mm- tools
metric & 7/16 -
1" -English )
Hammer, ball peen (3-4 lbs) 1 set ---
Pliers (mechanical 1O") 1 set ---
Adjustable wrench (18") 1 pc ---
Grease gun 2 pc Grease gun 2 pc

Screw driver (10 "flat & Philips) 1 set ---
Putty knife 5 ps ---
Mask 25 pcs.
Goggles 25 pcs
Safety helmet 25 pcs.
Safety vest 25 pcs.
Fire Extinguisher 2 pcs.
Equipment Equipment
Container Stacker(MOA / rental) 1 unit Container Stacker(MOA / 1 unit
rental)
Low bed trailer with tractor head & 1 unit ---
operator (MOA/ rental)
Materials Materials
Multi-purpose grease 5 Multi-purpose grease 5 kilos
kilos
Engine oil (SAE 15w40) 4 Engine oil (SAE 15w40) 4 liters
liters
Hydraulic/ steering fluid (TELLUS 20 Hydraulic / steering fluid 20 liters
68/10W) liters (TELLUS 68/10W)
Final drive/ differential (gear oil 10 Final drive/ differential (gear 10 liters
GP90/ 140) liters oil GP90/ 140)
liters
Brake fluid (DOT -4) 1 liter Brake fluid (DOT -4) 1 liter .
liters
liters
Battery - distilled water 5 pcs Battery - distilled water 5 pcs
Primary & Secondary air filter 1 set Primary & Secondary air 1 set
filter
Primary & secondary fuel filter 1 set Primary & secondary fuel 1 set
filter
Belts (air-con, water pump and 1 set Belts (air-con, water pump 1 set
alternator) and alternator)
Penetrating oil (250 ml) 2 Penetrating oil (250 ml) 2 cans
cans
Cotton rugs 2 Cotton rugs 2 kilos
kilos
Cleaning solvent 5 Cleaning solvent 5 liters
liters
Cleaning tool (one each kind) Set Cleaning tool (one each Set
kind)
Working Clothes 1 pair Working Clothes 1 pair
Safety shoes 10 Safety shoes 10 pairs
pairs
Gloves 10 Gloves 10 pairs
pairs
Goggles 10 Goggles 10 pcs
pcs
Dust Mask 10 Dust Mask 10 pcs
pcs
Hard hats 10 Hard hats 10 pcs
pcs
Operator's manual 1 pc Operator's manual 1 pc
CONSTRUCTION SECTOR
Qualification : I HEAVY EQUIPMENT OPERATION (Container Stacker) NCII
Existing Amendment

The container stacker operation workshop must be made of reinforced AREA
REOUI REMENT METERS INSO.
concrete or steel structure. Thes12e must be suited on the requirements of the
competencies. The class size of 25 students/trainees is reserved for the lecture METERS INSO.
room and the practical demonstration area for carrying out minor Container METERS
Stacker parts maintenance. Most of the learning activities are
performed individuallyin thteraineeswork area Student/Trainee's 100.0
AREAINSQ. TOTALAREAN
Workine:Soace
SPACE REQUREIENT SIZE N IETERS METERS SQ.IETERS Lecture Room 48.0
• Studenvrra1nee'sWorking 4 sq.m per 100.0sq.m.
Soace student LearningRe source 24.0
• Lecture Room 4800 480 Center
• LeamingResourceCenter 24.00 24.0 172.0
172
• Facih!Jes/Equ1pmenV 52 Facilities/Equipment/ 1000.0
CirculationArea Circulation Area
TOTALWORK AREA 224
Worm2 field 0.5hectare<MOAIRenta J) TOTAL WORKAREA 1172.0
r;:
II. C -AMENDMENT TRAINER QUALIFICATIONS (TQ)

CONSTRUCTION SECTOR
Qualification : I HEAVY EQUIPMENT OPERATION (Container Stacker) NC II
Existing Amendment
• Must be a holder of Heavy Equipment

Operation (Container Stacker) NCII • Holder of National TVET Trainer Certificate Level
• Must have undergone training on Training I (NTTC Level I) in HEO (Container Stacker)
Methodology II (TM Ill) NC II

• *Must have at least 5 years job/industry • Must have at least 5 years job/industry
experience* experience
position or appropriate professional license issued by • Must have completed the 40-Hour
the Professional Regulatory Commission) Construction Occupational Safety and Health
(COSH) per Department Order No. 13 s. 1998,
Guidelines Governing Occupational Safety and
by OSHC and DOLE accredited Safety
Training Orga izations
CONSTRUCTION SECTOR
Tools Tools
Wrenches (box and open-end 8-24 1 set Standard mechanical hand tools 2 sets
HEAVY EQUIPMENT mm- metric & 7/16 -1 '' -English )
OPERATION (Motor Hammer ballpeen (3-4 lbs) 1 set Hammer ballpeen (3-4 lbs) 1 set
Grader) NCII Pliers( mechanical 10 ") 1 set Pliers( mechanical 10 ") 1 set
Adjustable wrench (18 ") 1 pc Adjustable wrench (18 ") 1 pc
Grease gun 1 pc Grease gun 2 pcs.
Screw driver ( 10" fiat & Philips) 1 set Screw driver ( 10 "fiat & Philips) 1 set
Putty knife 1 pc Putty knife 1 pc
Pry bar (heavy duty) 1 pc Pry bar (heavy duty) 1 pc
Pipe wrench (12") 1 pc Pipe wrench (12") 1 pc
Vise grip (12 ") 1 pc Vise grip (12 ") 1 pc
Tire gauge 1 pc Tire gauge 1 pc
Mask 25 pcs.
Safety Goggles 25 pcs
Safety vest 25 pcs.
Equipment Equipment
Motor grader(MOA /rental) 1 unit Motor grader(MOA /rental) 1 unit
Low bed trailer with tractor head & 1 unit ---
operator (MOA/rental)
Vacuum cleaner 1 unit Vacuum cleaner 1 unit
Materials Materials
Multi- purpose grease 5 kls. Multi- purpose grease 5 kls.
Engine oil ( SAE 15w40) 4 liters Engine oil ( SAE 15w40) 4 liters
Hydraulic/ steering fluid {TELLUS 20 Hydraulic/ steering fluid 20 liters
68/10W) liters {TELLUS 68/1OW)
Final drive/ differential (gear oil GP90/ 10 Final drive/ differential (gear oil 10 liters
140) liters GP90/ 140)
liters
Tandem oil GP90/140 10 Tandem oil GP90/140 10 liters
liters
Water coolant 4 liters Water coolant 4 liters
liters liters
Primary & secondary air filter, 1 set Primary & secondary air filter, 1 set
Primary &secondary fuel filter 1 set Primary &secondary fuel filter 1 set
Belts (air-con, water pump and 1 set Belts (air-con, water pump and 1 set
alternator) alternator)
Penetrating oil (250 ml) 2 Penetrating oil (250 ml) 2 cans
cans
Cotton rugs 2 kilos Cotton rugs 2 kilos
Cleaning solvent 5 liters Cleaning solvent 5 liters
Cleaning tool{one each kind) 1 set Cleaning tool(one each kind) 1 set
Working clothes 1 pair Working clothes 1 pair
pairs
pairs
Goqqles 10 pcs Safety Goqqles 10 pcs
Dust Mask 10 pcs Dusk Mask 10 pcs
Hard hats 10 pcs Hard hats 10 pcs
CONSTRUCTION SECTOR
Qualification : I
HEAVY EQUIPMENT OPERATION (Motor Grader) NCII
Existing Amendment
SPACE SIZE IN AREA IN TOTA

3.5 TRAINING FACILITIES REQUl'REMENT METERS SQ. L
METERS AREA
The motor grader opera on workshop mustbe made of reinforced INSQ.
concreteor steel structure.The size must be suitedon therequirementsof the
METE
competencies.The classsizeof 25 students/traineesis reseNedfor the lecture
RS
room andthepracbcal demonstrationarea forcarryingout minormotor grader
parts maintenance.Most of the learningactivitiesareperformed individuallyin Student/Trainee's 100.0
the /trainees' workarea. Working Space
Lecture Room 48.0
Learning Resource 24.0

, .
SPACE REQUIREMa-JT SIZE IN METERS AREA IN SQ. TOTAL AREA Center
METERS IN
, SQ.METERS 172.0"
, Studentrrrainee'sWor ng 2.0X 2.0m. 4filUJ),per 100.0SJUll
student Facilities/Equfpment 1000.
Space
/ Circulation Area 0
LectureRoom 8.00X 6.00 48.00 48.0
LeaminqResourceCenter 4.00 X 6.00 24.00 24.0 TOTAL WORK AREA 1172.
172 0
• FacilitieS/EquipmenV 52
CirculationArea Working field
TOTAL WORK AREA 224
Wor nafield 0.5hectare(MOA/Rental)
II. C - AMENDMENT TRAINER QUALIFICATIONS (TQ)
CONSTRUCTION SECTOR
Qualification : I HEAVY EQUIPMENT OPERATION (Motor Grader) NCII
Existing Amendment
• Must be a holder of Heavy-Equipment Operation • Holder of National TVET CertifiGate Level I (NTTC
(Motor Grader) NC-II or equivalent qualification Level I) in HEO (Motor Grader) NC II
• Must have undergone training on Training • Musty be computer literate
Methodology II (TM II) or equivalent • Must be physically fit
training/experience • Must have at least 5 years job/ industry
• Must be computer-literate experience
• Must be physically and mentally fit • Must have completed the 40-Hour Construction
• Must have had at least 5 years job/industry Occupational Safety and Health (COSH) per
experience* Department Order No. 13 s. 1998, Guidelines
• Must be a civil-service eligible or holder of appropriate Governing Occupational Safety and Health in the
professional license issued by the Professional Construction Industry conducted by OSHC and
Regulatory Commission (for government position) DOLE accredited Safety Training Organizations
II. A- LIST OF TOOLS. EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Tools Tools
HEAVY Description Qty, Description Qty.
EQUIPMENT Standard mechanical hand tools 2 sets Standard mechanical hand 2 sets
OPERATION tools
(PAVER) NC II Multi meter 2 pcs. Multi meter 2 pcs.
Hydraulic pressure 1 set Hydraulic pressure 1 set
gauge with adapter gauge with adapter
Grease gun 2 pcs. Grease gun 2 pcs.
Safety helmet 25 pcs. Safety helmet 25 pcs.
Goggles 25 pcs. Goggles 25 pcs.
Cotton gloves 25 pairs Cotton gloves 25
pairs
Fire extinguisher 1 pc. Fire extinguisher 1 pc.
Equipment Equipment ·.
Paver 1 unit Paver 1 unit
Dump truck or transit mixer 1 unit ---
Asphalt kettle 1 unit ---
Truck tractor with low bed 1 unit ---
collapsible trailer
Materials Materials
liters liters
Grease 5 kilos Grease 5 kilos
Waste rags 25 kilos Waste rags 25 kilos
Ready mixed asphalt or concrete* Ready mixed asphalt or
concrete*
Penetrating oil 2 Penetrating oil 2
Aerosol Aerosol
can can
CONSTRUCTION SECTOR
Qualification : I HEAVY EQUIPMENT OPERATION (PAVER) NC II
Existing Amendment
The paver operation workshop must be of concrete

structure. Based on dass size of 25 students/trainees the space
requirements for theteaching/learning and circulationareas are as follows:
SPACE REQUIREMENT SIZE INMETERS AREA IN QTY TOTAL No Amendments

SQ. AREA IN
METERS SQ.
METERS
• Lecture area 8.0x 6.0 meters 48M2 1 48M2
• Leaming resource area 4.0x 6.0 meters 24M2 1 24M2
• Tool roomI Storagearea 3.0 x 3.0 meters 9M2 1 9M2
• Wash, toilet and locker 8.0x 4.0 meters 32M2 1 32M2
room
TOTAL 113M2
Facilities / Equipment/ - 1,000M2
Circulation 2
TOTAL AREA 1113M2

*Equipment maneuvering area near paver location, paver, dump truck or transit
mixer, and trailer truck with collapsible low-bedtrailer (MOA)

CONSTRUCTION SECTOR
Qualification : I HEAVY EQUIPMENT OPERATION (PAVER) NC II
Existing Amendment
• Must be a holder of Heavy Equipment • Holder of National TVET Trainer

Operation (Paver) NC 11 Certificate Level I (NTTC Level I) in
Must have undergone training on Training HEO (Paver) NC II
Methodology Ill {TMIll) or its equivalent
Must be physically and mentally fit Must be physically fit
•
•
• Must have at least 5 years job/industry • Must have at least 5 years job/industry
experience* experience
• Must be a civil service eligible (for
government position only) • Must have completed the 40-Hour
Construction Occupational Safety and
Health(COSH) per Department Order
No. 13 s. 1998, Guidelines
Governing Occupational Safety and
Health in the Construction Industry
conducted by OSHC and
DOLEaccredited Safety Training
Organizations
II A- LIST OF TOOLS, EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Tools Tools
HEAVY Description Qty Description Qty
EQUIPMENT wrenches (box and open-end 8-24 1set Standard mechanical hand 2 sets
OPERATION (Rigid mm- metric & 7/16 -1" -English ) tools
off-Highway Dump Hammer ballpeen (3-4 lbs) 1set ---
Truck) NCII Pliers( mechanical 10 ") 1set ---
Adjustable wrench (18 ") 1pc ---
Grease gun 1pc. Grease gun 2 pcs.
Screw driver ( 10 "flat & Philips) 1set ---
Putty knife 1pc. ---
Pry bar (heavy duty) 1pc. ---
Tire gauge (0-150 psi) 1 pc ---
Multi meter 2 pcs.
Hydraulic pressure 1 set
qauqe with adapter
Safety vest 25 pcs.
Goggles 25 pcs.
Cotton gloves 25
pairs
Fire extinquisher 1 pc.
Equipment EQuipment
Off-Highway Dump Truck 1 unit Off-Highway Dump Truck 1 unit
(Compactor)(MOA /rental) (Compactor)(MOA /rental)
Low bed trailer(MOA / rental) 1 unit ---
Materials Materials
Multi-purpose grease 5 kls. Multi-purpose grease 5 kls.
Engine oi ( SAE 15w40) 4 Engine oi ( SAE 15w40) 4 liters
liters
Hydraulic/ steering fluid (TELLUS 20 Hydraulic / steering fluid 20
68/10W) liters (TELLUS 68/1OW) liters
Final drive/ differential (gear oil 10 Final drive/ differential (gear 10
GP90/ 140) liters oil GP90/ 140) liters
Transmission oil (ATF) 10 Transmission oil (ATF) 10
liters liters
liters
liters liters
Battery distilled water 5 Battery distilled water 5 liters
liters
Working clothes 1 pair Working clothes 1 pair
pairs pairs
Gloves 10 Gloves 10
pairs pairs
Goggles 10 Goggles 10 pcs.
pcs.
Dust Mask 10 Dust Mask 10 pcs.
pcs.
Hard hat 10 Hard hat 10 pcs
pcs
Test weights 2 Test weights 2 units
- 3 tons units - 3 tons
- 10 tons -10 tons
Crawler crane miniature 1 pc ...
Operator's manual with load chart 1 pc Operator's manual with load 1 pc
chart
CONSTRUCTION SECTOR
Qualification : I HEAVY EQUIPMENT OPERATION (Rigid off-Highway Dump Truck) NCII
Existing Amendment

3.5 lRAININGFACILITIES
REQUIREMENT METERS IN SQ, AREA
The off-highwaydump truck (rigid)operation worksoop must bemade of
reinforcedconcrete or steel structure. The size must be su edon the METERS INSct
requirementsof the c001petendes. The dass size of 25studentsi1raineesis METERS
reservedfor the lectureroom and the pradicdaelmonstration areafor carrying
out minoor ff-h hway dump truck parts maintenance. Most of the learning Student/Traine eJs 100.0
activitiesare pertormed individual inthreaineeswork area. Workinf Space
LectureRoom 48.0
SPACEREQUIRafNT SIZE AREAINSQ. TOTAL AREA IN
INMEltRS MEltRS SQ. METERS LearningResource 24.0
, • Student/Trainee'sWooong 2.0x 4ml per 100.0mi,
Space 2.0meters student
Center
, Lecture Room 8.00x6.00 48.00 48.0 172.0
, LeamingResourceCenter 4.00x6.00 24.00 24.0
' 172 F acilities/Equipmentj 1000.0
, Fadlitiesi'EquipmenU 52 CirculationAre a
Circulation Area
TOTALWORKAREA 224 TOTALWORKAREA 1172.0
Workinafield 0.25hectare (MONRentall r,;

CONSTRUCTION SECTOR
Qualification : I
HEAVY EQUIPMENT OPERATION (Rigid Off-Highway Dump Truck) NC II
Existing Amendment
• Must be a holder of Heavy

• Holder of National TVET Trainer Certificate Level I (NTTC
Level I) in HEO (Rigid Off-Highway Dump Truck) NC II
Equipment Operation (Rigid off-
• highway dump truck) - NCII
Must have undergone
training on Training Methodology II
(TMII)
Must be computer literate • Must have at least 5 years job/industry experience

•
• Must be physically and • Must have completed the 40-Hour Construction
mentally fit Occupational Safety and Health (COSH) per
• Must have at least 2 years Department Order No. 13 s. 1998, Guidelines Governing
job/industry experience*
• Must be a civil service Occupational Safety and Health in the Construction
eligible (for government position or Industry conducted by OSHC and DOLE accredited
appropriate professional license Safety Training Organizations
issued by the Professional Regulatory
Commission)
II A - LIST OF TOOLS. EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Tools Tools
HEAVY Description Qty Description Qty
EQUIPMENT Wrenches (box and open-end 8-24 1 set Standard mechanical 2 sets
OPERATION mm- metric & 7/16 -1" -English ) hand tools
(Road Roller) Hammer ballpeen (3-4 lbs) 1 set ---
NCII Pliers( mechanical 10 ") 1 set ---
Adjustable wrench (18 ") 1 pc -·--
Grease gun 1 pc Grease gun 2 pcs.
Screw driver ( 10 "flat & Philips) 1 set ---
Putty knife 1 pc ---
Mask 25 pcs.
Goggles 25 pcs
Safety vest 25 pcs.
Equipment Equipment
Description Qty
Road roller (compactor) (MOA /rental) 1 unit Road roller 1 unit
(compactor) (MOA
/rental) ...
Low bed trailer with tractor head & 1 unit
operator (MOA/rental)
Portable electric air compressor 1 unit Portable electric air 1 unit
compressor
Materials Materials
Description Qty Description Qty '
Multi- purpose grease 5 kls Multi- purpose grease 5 kls
Engine oil ( SAE 15w40) 4 liters Engine oil ( SAE 4 liters
15w40)
Hydraulic/ steering fluid (TELLUS 20 Hydraulic/ steering 20 liters
68/10W) liters fluid (TELLUS 68/1OW)
Final drive / differential (gear oil GP90/ 10 Final drive / differential 10 liters
140) liters (gear oil GP90/ 140)
liters
Water coolant 4 liters Water coolant 4 liters
liters
Primary & secondary air filter, 1 set Primary & secondary 1 set
air filter,
Primary &secondary fuel filter 1 set Primary &secondary 1 set
fuel filter
Belts (air-con, water pump and alternator) 1 set Belts (air-con, water 1 set
pump and alternator)
Penetrating oil (250 ml) 2 cans Penetrating oil (250 ml) 2 cans
Cleaning solvent 5 liters Cleaning solvent 5 liters
Cleaning tool(one each kind) 1 set Cleaning tool(one each 1 set
kind)
Workinq clothes 1 pair Working clothes 1 pair
pairs
pairs
Goqqles 10 pcs Goqqles 10 pcs
Dust Mask 10 pcs Dust Mask 10 PCS
Hard hats 10 pcs Hard hats 10 pcs
CONSTRUCTION SECTOR
Qualification : I HEAVY EQUIPMENT OPERATION (Road Roller) NCII
Existing Amendment
SPACE SIZEIN 'AREA TOTAL

The road roller (Compactor) operation workshop must be made of
reinforced concrete or steel structure. The size must be suited on the METERS INSQ.
requirementsof the competencies. The class size of 25 students/traineesis METERS
reservedfor thelecture roomandthepractical demonstration area forcanying
out minor road roller [Compactor) parts maintenance. Most of the learning Stude nt/f raine eJs 100.0
activitiesare perfonmedind1vidual inthe aineesworkarea
Working Space
SPACE REQUIREMENT SIZE INMETERS AREA IN SQ. TOTALAREA IN
METERS SQ.METERS Lecture Room 48.0
2.0x 2.0m. 4uper 100.0 .
.
• Student/framee'sWorl<ing
Soace student
Learning Re source 24.0
• LectureRoom 8.00x6.00 48.00 48.0 Center
• LearnmgResourceCenter 4.00 X 6.00 24.00 24.0
172 172.0
• Facilities/Equipmenu 52
CirculationArea Facilities/Equipment/ 1000.0
TOTAL WORK AREA 22-4 Circulation Are a
Workinqfield 200 Sq m.(MOAJ Rentall
TOTAL WORK AREA 1172.0
r,;

CONSTRUCTION SECTOR
Qualification : I HEAVY EQUIPMENT OPERATION (Road Roller) NC II
Existing Amendment
• Must be a holder of Heavy Equipment • Holder of National TVET Trainer Certificate Level I
Operation (Road Roller [Compactor]) NC-II (NTTC Level I) in HEO (Road Roller) NC II
• Must have undergone training on
Training Methodology II (TM II) • Must be computer literate
• Must be computer literate • Must be physically fit
• Must have at least 5 years • Must have at least 5 years job/industry experience
• Must be a civil service eligible (for • Must have completed the 40-Hour
government position or appropriate professional Construction Occupational Safety and Health
license issued by the Professional Regulatory (COSH) per Department Order No. 13 s. 1998,
Commission) Guidelines Governing Occupational Safety and
Organizations
CONSTRUCTION SECTOR
Tools Tools
HEO (Transit Description Qty, Description Qty,
Mixer) NC II Standard mechanical hand tools 2 sets Standard mechanical 2 sets
. hand tools
Grease gun 2 pcs. Grease gun 2 pcs.
Mask 25 pcs. Mask 25 pcs.
Goqqles 25 PCS. Goqqles 25 pcs.
Safety helmet 25 PCS. Safety helmet 25 pcs.
Fire extinguisher 2 pcs. Fire extinguisher 2 pcs.
Hand pump (fuel) 2 PCS. Hand pump (fuel) 2 pcs.
Voltmeter pump 2 pcs. Voltmeter 2 pcs.
Equipment Equipment
Description Qty, Description Qty,
Transit mixer 2 units Self loading mixer type 2 units
and Transit mixer type
w/cap. 3 cum. minimum
Batching plant 1 plant ---
Water pressure washer 1 pc. Water pressure washer 1 pc.
Wheel loader 1 unit ---
Materials Materials
Description Qty, Description Qty.
Grease 25 kilos Grease 25 kilos
-· Diesel oil 800 liters Diesel oil 800 liters
Waste rags 25 kilos Waste rags 25 kilos
Gear oil 15 liters Gear oil 15 liters
Fluid 1 liter Fluid 1 liter
Distilled water 5 liters Distilled water 5 liters
Ready mixed concrete* Ready mixed concrete*
Concrete admixture* Concrete admixture*
CONSTRUCTION SECTOR
Qualification : I HEO {Transit Mixer) NC II
Existing Amendment
SPACE REQUIREMENT SIZE IN METERS AREA QTY TOTAL SPACE SIZEIN AREA TOTAL
IN SQ. AREA IN REQUIREMENT METERS INSQ. AREA
METERS SQ. METERS INSQ.
METERS METERS
• Lecturearea 8.0x 48M2 I 1 48M2 Lecture Area 48.0
6.0meters LearningResource 24.0
• Learnu,g resourcaerea 4.0x 6.0 meters 24M2 1 24M2 Area
Tool room/Storage 9.0
• Toolroom I Storagaerea 3.0x 9M2 1 9M2
area
3.0meters Wash1 toilet and 32.0
• Wash,to eland loc er 8.0x 32M2 1 32M2 locker room
room 4.0meters TOTAL 113.0
TOTAL 113M2 Facilities/Equipment/ 1000.0
Fa.cili / Eqip ti 5,000M2 Circulation Area
Circulation* TOTAL AREA 1,113,0
Batchingplant and its area,aggregate yard,transit mixer and wheel load(eMrOA)
I r
II. C -AMENDMENT TRAINERS QUALIFICATION {TQ)

CONSTRUCTION SECTOR
Qualification : j HEO {Transit Mixer) NC II
Existing Amendment
• Must be a holder of Heavy Equipment Operation • Holder of National TVET Trainer Certificate Level I
{Transit Mixer) NC II (NTTC Level I) in HEO {Transit Mixer) NC II
• Must have undergone training on Training • Must be physically fit

Methodology Ill {TM Ill) or its equivalent
• Must have at least 5 years job/industry Occupational Safety and Health (GOSH) per
experience* Department Order No. 13 s. 1998, Guidelines
Must be a civil service eligible (for government
po ition only)
II. A- UST OF TOOLS, EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Tools Tools
HEO (Wheel Description Qty. Description Qty.
Loader) NC Open end wrench 18 pcs. per set metric size 2 sets Standard mechanical hand 2 sets
II tools
Box wrench, 18 pcs. Pre set, metric size 2 sets Box wrench, 18 pcs. Pre set, 2 sets
metric size
Socket wrench, 18 pcs. Per set, metric size 2 sets Socket wrench, 18 pcs. Per set, 2 sets
metric size
Tire pressure gauge 2 unit Tire pressure gauge 2 unit
Belt tension gauge 2 unit Belt tension gauge 2 unit
Cooling system analyzer 2 unit Cooling system analyzer 2 unit
Ball pen hammer 2 pcs. Ball pen hammer 2 pcs.
Standard screw driver 2 sets Standard screw driver 2 sets
Assorted size, six pcs, per set. Assorted size, six pcs, per set.
Philip screw driver, Assorted size, six pcs. 2 sets Philip screw driver, Assorted 2 sets
Per set. size, six pcs. Per set.
Vice grip 2 pcs. Vice grip 2 pcs.
Long nose pliers 2 pcs. Long nose pliers 2 PCS.
Electrician Pliers 2 pcs. Electrician Pliers 2 pcs.
Side cutting pliers 2 pcs. Side cutting pliers 2 pcs.
Grease gun 2 unit Grease gun 2 unit
Equipment Equipment
Wheel Loader 1 unit Wheel Loader w/ 3.0 cum 1 unit
meter capacity bucket
Dump truck 1 unit Simulated or mock elevated 1 unit
dump box
Low- or high-bed Trailer 1 unit ---
Materials Materials
Wheel Loader air cleaner 5 pcs. Wheel Loader air cleaner 5 pcs.
Diesel engine oil 4 gals. Diesel engine oil 4 gals.
Battery lug/terminal 10 pcs Battery lug/terminal 10 pcs
Brake fluid 1 gal. Brake fluid 1 gal.
Distilled water 10 ltrs. Distilled water 10 ltrs.
Gear oil 5 gals. Gear oil 5 gals.
Hydraulic fluid 3 gals. Hydraulic fluid 3 gals.
Multi purpose grease 1 gal. Multi purpose grease 1 gal.
Coolant additives - 350ml. 10 Coolant additives - 350ml. 10 btls.
btls.
Wheel loader fuse, assorted amperes rating 40 Wheel loader fuse, assorted 40 pcs.
pcs. amperes rating
Penetrating oil 3 can Penetrating oil 3 can
CONSTRUCTION SECTOR
Qualification : I HEO (Wheel Loader) NC II
Existing Amendment
SPACE IZEIN AREA IN TOTAL

SPACE REQUIREMENT SIZE IN METERS AREA IN SQ. TOTAL REQUIREMENT METERS SQ. AREA IN
METERS AREA IN METERS SQ.
SQ. METERS
METERS
Student/frainee's 100.0
, Student/Trainee's 2.0x2.0 m. 4 sq.mper 100.0sq.m. Working Space
Working Space student
Lecture Room 48.0
, Lecture Room 8.00X 6.00 48.00 48.0
, Learning Resource Leaming Resource 24.0
4.00X 6.00 24.00 24.0
Center
Center
17 .0
' 172
Facilities/Equipmen 1000.0
, Facilities/EquipmenU 52 Circulation Area
Circulation Area
TOTAL WORK AREA 224 TOTAL WORK 117 .0
AREA
WorkinQ field 500 sq.m. (M0NRental)
Working field 500 sq. m. (MOA/Rental)
II. C - AMENDMENT TRAINERS QUALIFICATION {TQ)
CONSTRUCTION SECTOR
Qualification : I HEO (Wheel Loader) NC II
Existing Amendment
• Must be a holder of Heavy-Equipment • Holder of National TVET Trainer Certificate Level I

Operation (Wheel Loader) NC-II or equivalent (NTTC Level I) in HEO (Wheel Loader) NC II
qualification • Must be computer-literate
• Must have undergone training on Training • Must be physically fit
Methodology 11 (TM II) or equivalent in • Must have at least 5 years job/ industry experience*
training/experience • Must have completed the 40-Hour Construction
• Must be computer-literate Occupational Safety and Health (COSH) per
• Must be physically and mentally fit Department Order No. 13 s. 1998, Guidelines
• Must have at least 5 years job/industry Governing Occupational Safety and Health in the
experience* Construction Industry conducted by OSHC and DOLE
• Must be a civil-service eligible or holder of accredited Safety Training Organizations
appropriate professional license issued by the
Professional Regulatory Commission (for
government positions)
CONSTRUCTION SECTOR
Tools Tools
Plumbing Description Qty. Description Qty.
NC I Pipe wrench 4 units Pipe wrench (size 10") 1 pc.
(sizes 10", 12",14") each size Pipe wrench (size 12") 1 pc.
Pressure gauge ¼ size -(0- 2 units Pressure gauge ¼ size -(0- 2 units
300psi) 300psi)
Pick Mattock 3 units Pick Mattock 3 units
Steel Tape (5m) 6 pcs. Steel Tape (5m) 12 pcs.
Hacksaw with Blade 6 pcs. Hacksaw with Blade 5 pcs.

Spirit level bar or water hose 4 units Spirit level bar or water hose 5 units
level level
Cement trowel (pointed) 4 units Cement trowel (pointed) 5 units
Cold Chisel (var. lengths 8"- 6 pcs. No Amendments
12" dia. 5/8")
Shovel 6 units Shovel 2 Units
Ballpeen hammer (11/2 dia.) 6 pcs. Ballpeen hammer (11/2 dia.) 5 pcs.
Paint brush (1") 6 pcs. Paint brush (1") 5 pcs.
Pipe Cutter (1/2" -1") 3 pcs. Pipe Cutter (½"to 2") 1 pc.
Adjustable Wrench (8" and 2 pcs. Adjustable Wrench (1-8" and 2 pcs.
10") 1-10")
Mechanical Plier 2 pcs. Mechanical Plier 2 pcs.
Pipe vise(chain or Yoke) 1 unit Pipe vise(chain or Yoke) 1 unit
Plastic Drum (200 liters) 2 units Plastic Drum (200 liters) 1 Unit
Pail Plastic / G.I. (3 gals.) 2 pcs. Pail Plastic/ G.I. (3 gals.) 2 pcs.
Plumbing Blue Print Plan 6 sets Plumbing Blue Print Plan 5 sets
Manual Pipe Threader (1/2", 1 set Manual Pipe Threader (1/2", 1 set
¾," 1" sizes) ¾," 1" sizes)
Basin wrench, size 10" 5 units Basin wrench, size 10" 2 Units
Equipment Equipment
Manual Test pump 1 unit Manual Test pump 1 unit
Fusion Machine (20mm- 1 unit Fusion Machine (20mm- 1 unit
32mm) 32mm)
Electric Drill (drill bit ¼" - ½") 2 units Electric Drill (drill bit¼"- ½") 2 units
Blow torch 4 units Blow torch 4 units
Electric Grinder (4") 2 units Electric Grinder (4") 2 units
Hard Hat 25 pcs. Hard Hat 25 pcs.
Safety Shoes 25 pcs. Safety Shoes 25 pcs.
Goggles 25 pcs. Goggles 25 pcs.
Hand Gloves 25 pcs. Hand Gloves 25 pcs.
Dust Masks 25 pcs. Dust Masks 25 pcs.
Face Shield 12 pcs. Face Shield 12 pcs.
Materials Materials
Pattern paper 6 rolls Pattern paper 5 rolls
Pen and pencil 2 boxes Pen and pencil 2 boxes
PPR Pipes and Fittings
PPR Pipes 20mm x 4 mtrs. 25 pcs. PPR Pipes 20mm x 4 mtrs. 25 pcs.
PPR Gate Valve 20mm 25 pcs. PPR Gate Valve 20mm 5 pcs.
PPR Tee Equal 20m x 20mm 150 pcs. PPR Tee Equal 20m x 20mm 24 pcs.
PPR Tee Female 20mm x ½" 225 pcs. PPR Tee Female 20mm x ½" 24 pcs.
PPR Equal Elbow 20mm x 150 pcs. PPR Equal Elbow 20mm x 90° 30 pcs.
90°
PPR Elbow Female 20mm x 75 pcs. PPR Elbow Female 20mm x ½ 10 pcs.
½x 90° X 90°
PPR End Cap 20mm 150 pcs. PPR End Cap 20mm 24 pcs.
PPR Male Adapter ½" 150 pcs. PPR Male Adapter ½" 12 pcs.
PPR Female Adapter ½" 150 pcs. PPR Female Adapter ½" 12 pcs.
G.I. Plug½" 175 pcs. G.I. Plug½" 15 pcs.
Tefton Tape ¾" 150 rolls Teflon Tape¾" 50 rolls
Plumbing Fixtures
Water Meter 5 units Water Meter 5 units
Water Closet (Flush Tank) 5 units Water Closet (Flush Tank) 5 units
Lavatory with faucet 5 sets Lavatory with faucet 5 sets
Kitchen Sink with faucet 5 sets Kitchen Sink with faucet 5 sets
Single Point water heater 5 units Single Point water heater 5 units
Floor drains 15 pcs. Floor drains 15 pcs.
Faucets 10 sets Faucets 10 sets
Sanitary, Waste and Vent
System
PVC Pipe 4" x 3m s-1000 16 lengths PVC Pipe 4" x 3m s-1000 5 lengths
PVC Pipe 2" x 3m s-1000 25 lengths PVC Pipe 2" x 3m s-1000 10 lengths
PVC Wye 4" x 4" 25 pcs. PVC Wye 4" x 4" 10 pcs.
PVC Tee 4" x 2" 225 pcs. PVC Tee 4" x 2" 15 pcs.
PVC Elbow 4" x 90° 50 pcs. PVC Elbow 4" x 90° 10 pcs.
PVC Elbow 2" x450° 150 pcs. PVC Elbow 2" x450° 30 pcs.
PVC P- Trap 2" 50 pcs. PVC P- Trap 2" 10 pcs.
PVC Cleanout 4" 25 pcs. PVC Cleanout 4" 5 pcs.
PVC Solvent Cement 400cc 15 cans PVC Solvent Cement 400cc 5 cans
Cold Water Supply and
Distribution Piping
PVC Blue Pipe ½" x 10' 25 pcs. PVC Blue Pipe ½" x 10' 5 pcs.
PVC Tee½" x ½" 150 pcs. PVC Tee½" X ½" 24 pcs.
PVC Tee Female ½" x ½" 150 pcs. PVC Tee Female ½" x ½" 24 pcs.
PVC Elbow½" x 90° 150 pcs. PVC Elbow½" x 90° 30 pcs.
PVC Elbow Female ½" x 90° 75 pcs. PVC Elbow Female ½" x 90° 10 pcs.
PVC Cap½" 150 pcs. PVC Cap½" 24 pcs.
PVC Male Adapter ½" 100 pcs. PVC Male Adapter ½" 12 pcs.
PVC Female Adapter ½" 100 pcs. PVC Female Adapter ½" 12 pcs.
G.I. Plipes and Fittings
G.I Pipe 1/2 "x 20 sch. 40 13 pcs. G.I Pipe 1/2 "x 20 sch. 40 2 pcs.
Gate Valve½" - kitz brand 25 pcs. Gate Valve ½" - kitz brand 5 pcs.
G.I.Tee½" X ½" 75 pcs. G.I.Tee½" x ½" 12 pcs.
G.I.Elbow½" x 90° 100 pcs. G.I. Elbow½" x 90° 15 pcs.
G.I.Cap n1/2" 50 pcs. G.I. Cap n1/2" 15 pcs.
Single shower valve 5 pcs. Single shower valve 2 pcs.

CONSTRUCTION SECTOR
Qualification : I Plumbing NC I
Existing Amendment
The Construction - Civil Works (Plumbing) NC I workshopmust be of concrete

structure. Based on class size of 25 students/traineesthe space requirements for the
teachingneamingand circulationareas are as follows:
No Amendments
SPACE REQUIREMENT SIZEIN AREA IN TOTAL AREA IN

METERS SQ. SQ. METERS
METERS
• StudentfTrainee Working 5x8 40 40
Space
• Lecture Room/DemoRoom 5x 5 25 25
• WashRoom 2x5 10 10
• Tool Room 5x 5 25 25
• LaboratoryArea 5 unit-2 x 40 40
4
• Facilities/EquipmenU 6x7 42 42
Circulationarea
Workshop Area 10 X 18 180
II. C - AMENDMENT TRAINERS QUALIFICATION (TQ)
CONSTRUCTION SECTOR
Qualification : I Plumbing NC I
Existing Amendment
• Holder of National TVET Trainers Certificate level I-Plumbing NC
I or higher NC level
• Preferably Registered Master Plumber
• Preferably with a minimum of 2 years relevant industry
experience (plumbing works) in all of the following:
o Prepare Plumbing Layout
o Make Piping Joints and Connections No Amendments
o Perform Minor Construction Works
o Install and Assemble Single PlumbingUnit Note: Certified
by the employer
• Must have completed the 40-Hour Construction Safety Training
Course (COSH) as per Department Order No. 13 s. 1998,
Guidelines Governing Occupational Safety and Health in the
Construction Industry conducted by OSHC and DOLE accredited
• Must be computer-literate
11 A- LIST OF TOOLS. EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Tools Tools
NC II Pipe wrench 6 pcs. Pipe wrench (size 10") 1 pc.
(2 pcs each Tsizes 10", 12",14") Pipe wrench (size 12") 1 pc.
Pressure gauges (3" dia. X ¼" dia. 5 pcs. Pressure gauges (3" dia. X ¼" dia. 5 pcs.
0-300 psi) 0-300 psi)
Steel Tape (Sm) 25 pcs. Steel Tape (Sm) 12
pcs.
Spirit level bar 24" length 5 pcs. Spirit level bar 24" length 5 pcs.
Pipe Reamer 5 units Pipe Reamer 2 units
Pipe Vise 1" - 4" (2 Yoke vise and 4 units Pipe Vise 1" - 4" (2 Yoke vise and 2 1unit
2 chain vise) chain vise)
Pipe Cutter½" - 2" 5 pcs. Pipe Cutter ½" - 2" 2 pcs.
Ballpeen Hammer 25 pcs. Ballpeen Hammer 12 pcs.
Pointed Cold Chisel (various 25 pcs. Pointed Cold Chisel (various length 6 pcs.
length 10" -12") 10" -12")
Electrical Plier 5 pcs. Electrical Plier 5 pcs.
Plumb Bob (Std. size) 5 pcs. Plumb Bob (Std. size) 5 pcs.
Adjustable wrench (3each 10" & 6 pcs. Adjustable wrench (10") 2 pcs.
12") Adjustable wrench (12") 2 pcs.
Flat Screw Driver 10" 5 pcs. Flat Screw Driver 10" 5 pcs.
Philip Screw Driver 10" 5 pcs. Philip Screw Driver 10" 5 pcs.
Cold Chisel (var. lengths 8"-12" 25 pcs. Cold Chisel (var. lengths 8"-12" 6 pcs.
dia. 5/8") dia. 5/8")
Equipment Equipment
Threading Machine complete with 1 unit Threading Machine complete with 1 unit
the following 220 V the following 220 V
1 units Die head 2 units Die head
2 sets dies (1/2" & ¾" -1" - 2 sets dies (1/2" & ¾" -1" -
2") 1 pc pipe reamer 2") 1 pc pipe reamer
1 pc pipe cutter 1 pc pipe cutter
Fusion Machine (20mm - 32mm) 2 units Fusion Machine (20mm - 32mm) 2 units
Electric Drill (drill bit¼" - 5/8") 2 units Electric Drill (drill bit¼" - 5/8") 2 units
Manual Test Pump 2 units Manual Test Pump 1 unit
Cutting outfit set (Harris or Morris) 1 set Cutting outfit set (Harris or Morris) 1 set
with oxygen I acetylene cylinder with oxygen I acetylene cylinder
with gas content (refillable) with gas content (refillable)
Portable Soldering Kit 5 Portable Soldering Kit 5
cylinders cylinders
Welding machine 300 amperes 1 unit Welding machine 300 amperes 1 unit
with grounding and extension with grounding and extension
cable, electrode holder and cable, electrode holder and
welding mask. welding mask.
Electric Test Pump 1 unit Electric Test Pump 1 unit
Cut-off machine (14" dia. cutting 1 unit Cut-off machine (14" dia. cutting 1 unit
disc) disc)
Materials Materials
Plumbing Blue - print plan 6 sets Plumbing Blue - print plan 5 sets
Paint brush g 3 each, 1"& 1 ½") 6 PCS. Paint brush 5 pcs
Sand Paper (12" x 12" rough) 10 Sand Paper (12" x 12" rough) 10
sheets sheets
Chalk Stone 6 PCS. Chalk Stone 6 pcs.
Writing Paper 1 pad Writing Paper 1 pad
Welding Rod ( each 6011 and 2 kls. Welding Rod ( each 6011 and 2 kls.
6013 X 1/8" 6013 X 1/8"
G.I. Wire# 18 2 kls. G.I. Wire# 18 2 kls.
PPR Pipe 32mm x 4 mtrs. 5 pcs. PPR Pipe 32mm x 4 mtrs. 2 pcs.
PPR Pipes 20mm x 20mm 25 pcs. PPR Pipes 20mm x 20mm 10 pcs.
PPR Gate Valve 20mm 25 pcs. PPR Gate Valve 20mm 5 pcs.
PPR Tee Equal 20mm x 20mm 150 pcs. PPR Tee Equal 20mm x 20mm 24 pcs.
PPR Equal Elbow 20mm x goo 150 PCS. PPR Equal Elbow 20mm x 90° 30 pcs.
PPR Elbow Female 20mm x ½" x 75 pcs. PPR Elbow Female 20mm x ½" x 10 pcs.
goo goo
PPR Female Adapter½" 150 pcs. PPR Female Adapter ½" 12 pcs.
PPR Tee Reducer 32mm x 20mm 5 pcs. PPR Tee Reducer 32mm x 20mm 5 pcs.
Single shower valve 25 PCS. Sinale shower valve 5 pcs.
Plumbing Fixtures
Water Meter 5 units Water Meter 2 units
Water Closet (Flush Tank) with 5 units Water Closet (Flush Tank) with 2 units
Bidet Spray Bidet Spray
Kitchen Sink with faucet 5 sets Kitchen Sink with faucet 2 sets
Multipoint water heater 2 units No Amendments
Floor drains 15 PCS. Floor drains 5 pcs.
Faucets 10 sets Faucets 5 sets
Bath Tub with complete fittings 1 set Bath Tub with complete fittings 1 set
Urinal with push-button or flush 1 set Urinal with push-button or flush 1 set
valve and complete fittings valve and complete fittings
Grease trap, 4 gpm capacity 2 units Grease trap, 4 gpm capacity 2 units
Sanitary, Waste and Vent
System
PVC Pipe 6" m x 3m s-1000 8 PVC Pipe 6" m x 3m s-1000 5
lengths lengths
PVC Pipe 4" m x 3m 16 PVC Pipe 4" m x 3m s-1000 5
s-1000 lengths lengths

PVC Pipe 3"mx 3"ms-1000 5 PVC Pipe 3"mx 3"ms-1000 5
lengths lengths
PVC Pipe 2"mx 3"ms-1000 30 PVC Pipe 2"mx 3"ms-1000 10
length length
PVC Elbow 4" x go· 12 pcs. PVC Elbow 4" x go· 12 pcs.
PVC P- Trap 2" 15 pcs. PVC P- Trap 2" 10 pcs.
PVC Solvent Cement 400cc 4 cans PVC Solvent Cement 400cc 2 cans
PVC Wye 4" x 3" 5 unit PVC Wye 4" x 3" 3 pcs.
Cold Water Supply and
Distribution Piping
PVC Blue pipe 1" x 3 mtrs. 5 pcs. PVC Blue pipe 3/4" x 3 mtrs. 5 pcs.
PVC Tee Reducer 1" x ½" 5 pcs. PVC Tee Reducer 3/4" x ½" 5 pcs.
PVC Blue Pipe ½" x 10' 25 pcs. PVC Blue Pipe ½" x 10' 5 pcs.
PVC Tee½" x ½" 150 pcs. PVC Tee½" x ½" 24 pcs.
PVC Tee Female ½" x ½" 150 pcs. PVC Tee Female ½" x ½" 24pcs.
PVC Elbow½" X go· 150 pcs. PVC Elbow½" x go· 30 pcs.
PVC Elbow Female½" X go· 75 pcs. PVC Elbow Female½" x go· 10 pcs.
PVC Cap½" 75 pcs. PVC Cap½" 24 pcs.
PVC Male Adapter ½" 100 pcs. PVC Male Adapter ½" 12 pcs.
PVC Female Adapter ½" 100 pcs. PVC Female Adapter ½" 12 pcs.
Teflon Tape 150 rolls Teflon Tape 50 rolls
G.IPlug½" 200 pcs. G.I Plug½" 15 pcs.
Gate Valve½" Screwed Type 25 pcs. Gate Valve½" Screwed Type 10 pcs.
G.I. Plipes and Fittings
G.I.Pipe 1" x 6 mtrs. 5 pcs. G.I. Pipe 3/4" x 6 mtrs. 2 pcs.
G.I. Tee Reducer 1" x ½" 5 pcs. G.I. Tee Reducer 3/4" x ½" 5 pcs.
G.I. Pipe½" x 20 sch. 40 13 pcs. G.I. Pipe½" x 20 sch. 40 2 pcs.
Gate Valve ½" - Screwed Type 25 pcs. Gate Valve½" - Screwed Type 5 pcs.
G.I. Tee½" X ½" 75 pcs. G.I. Tee½" X ½" 12 pcs.
G.I. Elbow ½" x 90° 100 pcs. G.I. Elbow ½" x 90° 15 pcs.
G.I. Cap½" 75 pcs. G.I. Cap½" 15 pcs.
G.I. Plug½" 175 pcs. G.I. Plug½" 15 pcs.
CONSTRUCTION SECTOR
Qualification : I Plumbing NC II
Existing Amendment
-
The Construction - Civil Works (Plumbing) NC I workshop must be of

concrete structure. Based on class size of 25 students/trainees the space
requirements for the teachingnearning and circulationareas are as follows:
SPACE REQUIREMENT SIZEIN AREA IN TOTAL AREA IN

METERS SQ. SQ. METERS
METERS
No Amendments
• Student/Trainee Working 5x8 40 40
Space
• Lecture Room/Demo Room 5x5 25 25
• Wash Room 2x5 10 10
• Tool Room 5x5 25 25
• Laboratory Area 5 unit-2 x 4 40 40
• Facilities/Equipment' 6x7 42 42
Circulationarea
Workshop Area 10 X 18 180
11 C - AMENDMENT TRAINERS QUALIFICATION (TQ)
CONSTRUCTION SECTOR
Qualification : I Plumbing NC II
Existing Amendment
• Holder of National TVET Trainers Certificate Level I -Plumbing
NC II or higher NC Level
• Preferably a Registered Master Plumber;·
• Preferably with a minimum of 3 years relevant industry
experience* (plumbing works) in all of the following:
o Prepare estimation of materials for multiple plumbing units
o Perform Multiple units of Plumbing Installation
and Assemblies
o Conduct pipe leak testing No Amendments
o Perform plumbing repair and maintenance works
Note: * Certified by the employer or Registered Master Plumber
• Must have completed the 40-Hour Construction Safety Training

Course (COSH) as per Department Order No. 13 s.1998,
Guidelines Governing Occupational Safety and Health in the
Construction Industry conducted by OSHC and DOLE accredited
CONSTRUCTION SECTOR
Tools Tools
NC Ill Pipe wrench 6 pcs. Pipe wrench (size 10") 2 pcs.
(2 pcs each sizes 10", 12" Pipe wrench (size 12") 2 pcs.
,14")
Pressure gauges 5 pcs. Pressure gauges 5 pcs.
(3" dia. X ¼" dia. 0-300 psi) (3" dia. X ¼" dia. 0-300 psi)
Steel Tape (5m) 25 pcs. Steel Tape (5m) 12 pcs.
Spirit level bar 24" length 5 pcs. Spirit level bar 24" length 5 pcs.
Pipe Reamer 5 units Pipe Reamer 2 units
Pipe Vise 1"- 4"(2 Yoke vise 4 units Pipe Vise 1" - 4" 1 unit
and 2 chain vise) Pipe Vise 1"-4" (Yoke) 1 unit
Pipe Cutter ½" - 2" 5 pcs. Pipe Cutter ½" - 2" 2 pcs.
Ballpeen Hammer 25 pcs. Ballpeen Hammer 12 pcs.
Pointed Cold Chisel (various 25 pcs. Pointed Cold Chisel (various 6 pcs.
length 10"-12") length 10"-12")
Electrical Plier 5 pcs. Electrical Plier 5 pcs.
Plumb Bob (Std. size) 5 pcs. Plumb Bob (Std. size) 5 pcs.
Pipe Cutter 2 ½" -4" 1pc. Pipe Cutter 2 ½" -4" 1pc.
Adjustable wrench (3each 10" 6 pcs. Adjustable wrench (10") 2 pcs.
& 12") Adjustable wrench (12") 2 pcs.
Flat Screw Driver 10" 5 pcs. Flat Screw Driver 10" 5 pcs.
Philip Screw Driver 10" 5 pcs. Philip Screw Driver 10" 5 pcs.
Cold Chisel (var. lengths 8"- 25 pcs. Cold Chisel (var. lengths 8"-12" 6 pcs.
12" dia. 5/8") dia. 5/8")
Plum bob 5pcs. Plum bob 5pcs.
Back wrench 5pcs. Back wrench 2 pcs.
Open wrench 5pcs. Open wrench 2 pcs.
Combination wrench 5pcs. Combination wrench 2 pcs.
Vise grip 5pcs. Vise grip 2 pcs.
Equipment Equipment
Threading Machine complete 1 unit Threading Machine complete with 1 unit
with the following 220 V the following 220 V
3 units Die head 4 units Die head
2 sets dies (1/2" & ¾" -1"- 2 sets dies (1/2" & ¾" -1"- 2")
2") 1 pc pipe reamer
1 pc pipe reamer 1 pc pipe cutter
1 pc pipe cutter
Fusion Machine (20mm - 2 units Fusion Machine (20mm - 32mm) 2 units
32mm)
Electric Drill (drill bit¼"- 5/8") 2 units Electric Drill (drill bit¼"- 5/8") 2 units
Cutting outfit set (Harris or 1 set Cutting outfit set (Harris or Morris) 1 set
Morris) with oxygen I acetylene with oxygen I acetylene cylinder
cylinder with gas content with gas content (refillable)
(refillable)
Push Drill ¼" - 5/8" size 1 unit Push Drill ¼" - 5/8" size 1 unit
Portable Soldering Kit 5 Portable Soldering Kit 5
cylinders cylinders
Welding machine 300 amperes 1 unit Welding machine 300 amperes 1 unit
with grounding and extension with grounding and extension
cable, electrode holder and cable, electrode holder and
welding mask. welding mask.
Electric Test Pump 1 unit Electric Test Pump 1 unit
Cut-off machine (14" dia. 1 unit Cut-off machine (14" dia. cutting 1 unit
cutting disc ) disc)
Materials Materials
Plumbing Blue - print plan 6 sets Plumbing Blue-print plan 5 sets
Paint brush ( 3 each, 1" & 1 6 pcs. Paint brush ( 3 each, 1" & 1 ½") 6 pcs.
½")
Sand Paper (12" x 12" rough) 10 Sand Paper (12" x 12" rough) 10
sheets sheets
Chalk Stone 6 pcs. Chalk Stone 6 pcs.
Writing Paper 1 pad Writing Paper 1 pad
Welding Rod ( each 6011 and 2 kls. Welding Rod ( each 6011 and 2 kls.
6013 X 1/8" 6013 X 1/8"
G.I. Wire# 18 2 kls. G.I. Wire# 18 2 kls.
PPR Pipe 32mm dia. x 4 mtrs. 5 pcs. PPR Pipe 32mm dia. x 4 mtrs. 2 pcs.
PPR Pipes 20mm dia. x 20mm 25 pcs. PPR Pipes 20mm dia. x 20mm 10 pcs.
PPR Gate Valve 20mm dia. 25 pcs. PPR Gate Valve 20mm dia. 5 pcs.
PPR Tee Equal 20mm dia. x 150 pcs. PPR Tee Equal 20mm dia. x 24 pcs.
20mm 20mm
PPR Equal Elbow 20mm dia. x 150 pcs. PPR Equal Elbow 20mm dia. x 30 pcs.
goo goo
PPR Elbow Female 20mm dia. 75 pcs. PPR Elbow Female 20mm dia. x 10 pcs.
X ½" X goo ½" X goo
PPR Female Adapter ½" 150 pcs. PPR Female Adapter½" 12 pcs.
PPR Tee Reducer 32mm dia. 5 pcs. PPR Tee Reducer 32mm dia. x 5 pcs.
x20mm 20mm
Combination shower valve (Hot 5 pcs. Combination shower valve (Hot 5 pcs.
and Cold) and Cold)
Plumbing Fixtures
Water Meter, ½ dia. 5 units Water Meter, ½ dia. 2 units
Water Closet (Flush Tank) 5 units Water Closet (Flush Tank) with 2 units
with Bidet Spray Bidet Spray
Install hot, chilled and /or potable water piping system
Install riser/downfeed and distribution water supply system
Install and connect pumps to plumbing system.
Perform finishing and trimming of plumbing fixtures and accessories
Draft plumbing plan No Amendments
Note: *Certified by the employer or Registered Master Plumber

Must be computer-literate
Must have completed the 40-Hour Construction Safety Training Course (GOSH) as per (GOSH) as per D
s. 1998, (Guidelines Governing Occupational Safety and Health in the Construction Industry) conducted b
II A- LIST OF TOOLSI EQUIPMENT AND MATERIALS
CONSTRUCTION SECTOR
Tools Tools
Rigging NC I Description Qty. Description Qty.
Open end spanners (mm) 1 set Open end spanners (mm) 1 set
Back Wrench (mm) 1 set Back Wrench (mm) 1 set
Ring spanners (11 pcs) mm 1 set Ring spanners (11 pcs) mm 1 set
Socket Accessories 1 set Socket Accessories 1 set
Ratchet, reversible, male extension, 1 set Ratchet, reversible, male extension, 1 set
male & female, adjustable offset male & female, adjustable offset
handle handle
Adjustable wrench 1 set Adjustable wrench 1 set
Combination pliers 1 set Combination pliers 1 set
Screwdrivers standard tip-round 1 set Screwdrivers standard tip-round blade 1 set
blade
Screwdriver, Philips type-round blade 1 set Screwdriver, Philips type-round blade 1 set
Equipment Equipment
Crane 1 unit Types of Crane 1 unit
Materials Materials
Reference 1 set Reference 1 set
Books 1 set Books 1 set
Manuals 1 set Manuals 1 set
Catalogs 1 set Catalogs 1 set
Brochure 1 set Brochure 1 set
Modules/LEs 1 set Modules/LEs 1 set
CDNideo tapes 1 set CD/Video tapes 1 set
Bolts 2 sets Bolts 2 sets
Nuts 2 sets Nuts 2 sets
Retaining pine 2 sets Retaining pine 2 sets
Sheaves 2 sets Sheaves 2 sets
Hooks 2 sets Hooks 2 sets
Side plates 2 sets Side plates 2 sets
Shackles 2 sets Shackles 2 sets
Locks 2 sets Locks 2 sets
Wire rope clips 2 sets Wire rope clips 2 sets
Types.of links 2 sets Types of links 2 sets
Types of thimbles 2 sets Types of thimbles 2 sets
Sleeves 2 sets Sleeves 2 sets
Sockets 2 sets Sockets 2 sets
Filler rod 2 sets Filler rod 2 sets
CONSTRUCTION SECTOR
Qualification : Rigging NC I
Existing Amendment
!J
15 SPACE SIZEIN AREA IN TOTAL
REQUIREMENT METERS SQ. AREA IN
METERS SQ.
METERS
Student/Trainee's 100.0
WorkingSpace
LectureRoom 48,0
Learning Resource I 24.0
Center
172
Facilities/Equipmem/ 1000.0
Circulation Area
TOTAL WORKAREA 1172.0
Workingfield 0.25hectare (MOA/Rental)
r

CONSTRUCTION SECTOR
Qualification : I Rigging NC I
Existing Amendment
• Must be a holder of NC II • Holder of National TVET Trainer Certificate Level I

(NTTC Level I) in Rigging NC I
• *Must have at least 2 years job/industry
experience • Must have at least 2 years job/industry experience
Occupational Safety and Health (COSH) per
CONSTRUCTION SECTOR
Tools Tools
Screed Operation Description Qty Description Qty
NCI Wrenches (box and open-end 8-24 1 set Standard mechanical hand 2 sets
mm-metric & 7/16 - 1"-English tools
)
Hammer, ball peen (34 lbs) 1 set ...
Pliers (mechanical 1O") 1 set ...
Adjustable wrench (18") 1 pc ...
Grease gun 2 pcs Grease gun... 2 pcs .
Screw driver (10"flat &Philips) 1 set
Putty knife 25 pcs ...
Pry bar (heavyduty) 1 pc ...
Pipe wrench (12") 1 pc ...
Vise grip (12 ") 1 pc ...
Pull push rule 1 pc. ·--
Steel brush 5 pcs. ...
Hydraulic jack (10tons) 1 pc ...
Mask 25 pcs.
Goqqles 25 pcs
Safety vest 25 pcs.
Fire ExtinQuisher 2 pcs.
Equipment Equipment
Paver (MOA / rental) 1 unit Paver (MOA / rental) 1 unit
Pressure washer 1 unit Pressure washer 1 unit
Materials Materials
Multi-purpose grease 5 kilos Multi-purpose grease 5 kilos
Penetrating oil (250 ml) 2 cans Penetrating oil (250 ml) 2 cans
Cleaning solvent 5 liters Cleaning solvent 5
liters
Working Clothes 1 pair Working Clothes 1 pair
pairs pairs
Gloves 10 Gloves 10
pairs pairs
Goggles 10 pcs Goggles 10
pcs
Dust Mask 10 pcs Dust Mask 10
PCS
Hard hats 10 pcs Hard hats 10
pcs
11. B - TRAINING FACILITIES (TFl
CONSTRUCTION SECTOR
Qualification : I Screed Operation NC I
Existing Amendment

HEAVY EQUIPMENT OPERATION (CONCRETING AND REQUIREMENT METERS INSQ. AREA
ASPHALTING)
METERS INSQ.
The screed attachment operabon workshop must be made of METERS
reinforced concrete or steel strucrure The size must besuited on the
requirements of the competen Ies. The classsizeof 25 Stude nt/f raine
students/traineesIsreserved for the lecture room and the prac cal 100.0
demonstraaon area for canying out minor screed attachment e's
maintenanceservicing Mostof the learningacnvioesare performed
mdIvIdual m the aineesworkarea WorkingSpace
AREAt.lSQ. TOTALAREA
SPACE REQUIRBENT SIZE INMETERS
METERS
INSQ. Lecture Room 48.0
METERS
Stu denVTrainee'sWorking 4 per 100.0 . Learning Re source 24.0
Soace student
Lecture Room
Learninq ResourceCenter
48.00
2400
480
24 0
Center
172 172.0
Facilities/Equipment 52
/CirculaMnArea
TOTAL WORK AREA 224
Facilities/Equipment/ 1000.0
Work1no field 0.5hectare IMOA/R entall Circulation Are a
TOTAL WORKAREA 1172.0 r,;
11 C -AMENDMENT TRAINER QUALIFICATIONS (TQ)

CONSTRUCTION SECTOR
Qualification : I Screed Operation NC I
Existing Amendment
• Must be a holder of • Holder of National TVET Trainer Certificate Level I

Heavy Equipment Operation (Screed (NTTC Level I) in Screed Operation NC I
Operation) NC-I
• Must have undergone training on • Must be physically fit
Training Methodology II (TM II)
• Must be physically and mentally • Must have at least 5 years job/industry experience
fit • Must have completed the 40-Hour Construction
• *Must have at least 5 years Occupational Safety and Health (COSH) per
• Must be a civil service eligible Governing Occupational Safety and Health in the
(for government position or appropriate Construction Industry conducted by OSHC and DOLE
professional license
• issued by the Professional
II. A - AMENDMENT LIST OF TOOLS, EQUIPMENT AND MATERIALS
ELECTRICAL AND ELECTRONICS SECTOR
COMPUTER Tools Tools
SYSTEMS Item/ Description Qty Item/ Description Qty
SERVICING NC II Screwdriver (standard) 10 pcs Screwdriver (standard) 10 pcs
Screwdriver (Philips) 10 pcs Screwdriver (Philips) 10 pcs
Precision screwdrivers 5 sets Precision screwdrivers 5 sets
Long nose pliers 10 pcs Long nose pliers 10 pcs
Mechanical pliers 10 pcs Mechanical pliers 10 pcs
Allen wrench 10 sets Allen wrench 10 sets
Crimping tools 10 pcs Crimping tools 10 pcs
Soldering iron 10 pcs Soldering iron 10 pcs
Solder sucker 10 pcs Solder sucker 10 pcs
Wire stripper 5 pieces Wire stripper 5 pieces
Portable electric hand drill 1 unit Portable electric screwdriver 1 unit
Drill bit 1 set Screw bit 1 set
Anti-static devices 10 pcs Anti-static devices 10 pcs
Flash light/Head mounted light 5 pcs Flash light/Head mounted light 5 pcs
Can of Compressed Air or Small 10 cans or
Portable Vacuum 1 unit
Impact punchdown tool 10 pcs
Hot Air Soldering 1 unit
Cleaning Brush 1 unit
Equipment Equipment
Item/ Description Qty Item/ Description Qty
Desktop Computer 26 units Desktop Computer 10 units
Laptop computer/Netbook 10 Laptop computer/Netbook 10 units
Computers for server 10 Computers for server 10 units
Server cabinet/Frame 10 Server cabinet/Frame 10 units
Patch panel (48-ports) 20 pcs Patch panel (24 or 48-ports) 20 pcs
Working tables 10 sets Working tables 10 sets
Internet subscription (at least 2 1 unit Internet subscription (at least 50 1 unit
MBPS) MBPS)
Uninterruptible Power Supply 10 units Uninterruptible Power Supply 10 units
(UPS) (UPS)
Hub/ Switch 10 unit Hub/ Switch 10 unit
Managed switch 2 units Managed switch 1 unit
KVM Switch 1 unit
Network controller 1 Network controller 1
ADSL Router with Wi-Fi 11 Router with Wi-Fi 10 units
Wireless Access Point 10 Wireless Access Point 10
PC Video camera 1 unit PC Video camera/ Web camera 10 units
External optical drive 2 units External optical drive 2 units
USB External HD 1 unit USB External HOD, 3.5 1 unit
enclosure
USB External HOD, 2.5 1 unit
enclosure
1 unit
USB External HOD, All-in-one
External enclosure
Network External HD 1 unit Network Attached Storage 1 unit
(NAS) HD - 1 unit
scanner 1 unit 1 unit
USB printer 1 unit 3-in-1 Printer with Wireless
Network printer 1 unit Access
Flash disk / Memory stick 11 pcs Flash drive 10 units
Electronic tester VOM 10 units Electronic tester VOM 10 units
LAN Cable tester 5 units LAN Cable tester 5 units
Materials Materials
RJ 45 400 pcs. RJ 45 400 pcs.
Modular box (RJ45) 25 pcs. Modular box (RJ45) 25 pcs.
Raceway or Slotted PVC 1.5" x 20 pcs. Raceway or Slotted PVC 1.5" x 20 pcs.
1.5"X 48" 1.5"X 48"
UTP cable 1 box UTP cable (CAT 6) 1 box
Contact cleaner 1 can Contact cleaner 1 can
Whiteboard 1 piece Whiteboard 1 piece
Fastener 1 lot
Filler (lead-free) 1 spool Filler (lead-free) 1 spool
Fiber optic cable 2 meters 8 pcs Fiber optic cable 2 meters 4 pcs
(terminated) (terminated)
'
INSTALLERS/ SOFTWARE INSTALLERS / SOFTWARE
Desktop OS (license for 26 Desktop OS ( Windows 7 and
proprietary software) up - volume license for 10 units
proprietary software)
Network OS (license for 10 Network OS (Windows Server
proprietary software) 2008 and up - license for 1 unit
proprietary software)
Office productivity software 26 Office productivity software
(license for proprietary software) (license for proprietary software)
10 units
- FREE Version acceptable
OpenOffice/LibreOffice/WPS
Anti-virus (license for proprietary 26 Anti-virus (license for proprietary
software) software) - or FREE version 10 units
acceptable
Disk utility software 5 Disk utility software - FREE
10 units
Version acceptable
Virtualization software (license 5 Virtualization software (license
for proprietary software) for proprietary software) -FREE 10 units
Version acceptable
. Disk creator software 5 Disk creator software (Bootable
USB Image Creator) - FREE 10 units
version
Disk image software 5 Disk image software (Image for
Recovery system) FREE version 10 units
acceptable
RESOURCES/MANUALS RESOURCES/MANUALS
Motherboard's manual and 26 pieces Motherboard's manual and 26 pieces
installer installer
Device driver installer 10 pieces Device driver installer 10 pieces
Assorted Computer book, PC 1 lot Assorted Computer books/e- 1 lot
Magazines and journals books, online
magazines/journals
Alcohol (lsopropyl 70%) 1 Liter
II. B - AMENDMENT TRAINING FACILITIES (TF)
Qualification : I COMPUTER SYSTEMS SERVICING NC II
Existing Amendment
3,5, TRAININGFACILITIES 3.5. TRAININGFACILITIES
TheComputerSystemsServiceWorkshopmus beinan infrastructurefacilltythatis TheComputerSystemsServiceWorkshopmustbeinan infrastructurefacilitythatis

generallyacceptedto industrystandardsandpractice. Basedonclasssizeof
generallyacceptedto industrystandardsandpractice. Basedonclasssizeof
minimumof25 student/traineesthespacerequirementsfortheteaching/leaming
minimumof 25 studen raineesthespacerequiremens for the andcirculationareasareasfollows:
teachingl/earning and circulationareasareas follows:
+
± TEACHING/ SIZE AREA TOTAL AREA
TEACHING/ SIZE AREA TOTAL AREA LEARNING AREAS (inMETER) (in SQ.Meters) (inSQ.Meters)
LEARNING AREAS (inMETER} (inSq.Meters) (in Sq.Meters) • laboratory
• laboratory and/or lecture 6x8 48 48
and/orlecture 6x8 48 48 area
area • storaQe area 2x2 4 4
• storaae area 2x2 4 4 • learning
resourcecenter 4x5 20 20
• learning
4x5 20 20 • equipment
. resourcecenter circulationarea
20 20
• equipment
20 20 TotalWorkshopArea: 92
circulationarea
□
TotalWorkshopArea 92 (Disinfecting area/Portable hand wash area if possible)
: C
II. C - AMENDMENT TRAINERS' QUALIFICATION (TQ)

Qualification : I COMPUTER SYSTEMS SERVICING NC II
Existing Amendment
• Holder of National TVET Trainer's Certificate • Holder of National TVET Trainer's Certificate (NTTC)
(NTTC) Level 1 Level 1 in Computer Systems Servicing NC II
• *Must have at least 2 years relevant job/industry • Must have at least 2 years relevant job/industry
experience. experience.
* Opti nal: Only whenrequired by thehiring institution FOR RENEWAL

• CPD units, work Immersion, relevant seminars/refresher
trainings will be accepted as part of the requirements for
renewal.
II A - AMENDMENT LIST OF TOOLS. EQUIPMENT AND MATERIALS
Qualification Existing TEM Amendment
ELECTRONIC Tools Tools
PRODUCTS Item/ Description Qty Item/ Description Qtv
ASSEMBLY AND Pliers assorted, Long nose, Side Pliers assorted, Long nose, Side
1 set cutter 1 set
SERVICING NC II cutter
Screw driver assorted, Phillips, Screwdriver assorted, Phillips,
1 set 1 set
slotted slotted
Desoldering tools 1 set Desoldering tools 1 set
Wrenches assorted 1 set Wrenches assorted 1 set
Allen wrench/key 1 set Allen wrench/key 1 set
Utility knife/stripper 1 pc Utility knife/stripper 1 pc
Test jigs 1 set Digital Trainer 1 set
Wire stripper 1 pc Wire stripper 1 pc
Digital micrometer 1 pc
Anti-static strap 1 pc Anti-static strap 1 pc
Anti-static brush 1 pc Anti-static brush 1 pc
Anti-static mat 1pc Anti-static mat 1pc
Bread boards 1 set Bread boards 1 set
Equipment Equipment
Item Description Qty Item / Description Qty
Multimeter (analog/digital) 1 unit Multimeter (analoq/diqifal) 1 unit
Workshop table 1 set Workshop table 1 set
High grade magnifying glass with High grade magnifying glass with
1 set lamp 1 set
lamp
Variable power supply 1 unit Variable power supply 1 unit
Variable transformer 1 unit Variable transformer 1 unit
Hot air soldering station Hot air solderinq station
Oscilloscope, digital 1 unit Oscilloscope, diqital 1 unit
Signal generator 1 unit Signal generator 1 unit
Function generator 1 unit Function generator 1 unit
Electronically-controlled soldering Electronically-controlled soldering
station 1 unit station 1 unit
Recommended equipment Recommended equipment
(Optional): (Optional):
Table top reflow oven 1 unit Table top reflow oven 1 unit
Lead-free soldering system 1 unit Lead-free solderinq system 1 unit
ESD free work bench with mirror ESD free workbench with mirror
back-to-back/one-sided 1 set back-to-back/one-sided 1 set
Equipment for consumer- Equipment for consumer-
electronics shop/laboratory - electronics shop/laboratory -
Audio-video product/ appliance Audio-video product/ appliance
and component parts: and component parts:
• Radio receivers • Radio receivers
• Audio recorders 1 Lot • Audio recorders 1 Lot
• Electronic musical • Electronic musical
instruments/keyboards instruments/ keyboards
• DVD/VCD player • DVD/VCD player
• Public-address (PA) systems • Public-address (PA) systems
• Television (Home/Portable) • Television (Home/Portable)
• PC monitors • PC monitors
Domestic electronic-controlled Domestic electronic-controlled
appliances consisting of - appliances consisting of -
• Electronic-controlled • Electronic-controlled
Washing Machines Washing Machines
• Microwave Oven 1 Lot • Microwave Oven 1 Lot
• Induction stove • Induction stove
• Rechargeable light • Rechargeable light
..
• Electronic-controlled air- • Electronic-controlled air-

conditioner/fan conditioner/fan
Equipment for industrial Equipment for industrial
electronics products and electronics products and
systems shop/ laboratory - systems shop/ laboratory -
Industrial-electronics components 1 Lot Industrial-electronics components 1 Lot
Industrial-electronic Industrial-electronic
product/device and component product/device and component
parts parts
• Control boards and modules • Control boards and modules
• Motor controllers and drives 1 Lot • Motor controllers and drives 1 Lot
• Sensors and input devices • Sensors and input devices
• Actuators and output devices • Actuators and output devices
• Opto-electronics equipment • Opto-electronics equipment
and devices and devices
Materials Materials
SolderinQ wire 1 spool SolderinQwire 1 spool
SMD soldering paste 50 ml SMD soldering paste QO ml
SMD soldering flux 500 ml SMD soldering flux 500 ml
Cleaning brush 1 pc. Cleaning brush 1 pc.
Thinner/alcohol 1 bottle Thinner/alcohol 1 bottle
Thermal paste 5ml Thermal paste 5ml
Ferric chloride 1 bottle Ferric chloride 1 bottle
Pale or water bucket 5 units Pale or water bucket 5 units
Stranded/solid/ hook-up wires Sm Stranded/solid/ hook-up wires Sm
wire stranded, #22, red 10m wire stranded, #22, red 10m
wire stranded, #22, black 10m wire stranded, #22, black 10m
wire stranded, #22, white 10m wire stranded, #22, white 10m
wire stranded, #22, blue 10m wire stranded, #22, blue 10m
wire stranded, #22, yellow 10m wire stranded, #22, yellow 10m
wire stranded, #22, green 10m wire stranded, #22, green 10m
Solid wires, assorted color 10m Solid wires, assorted color 10m
Assorted electronic components 1 set Assorted electronic components 1 set
resistors (different values) 50 pcs resistors (different values) 50 pcs
capacitors (different values) 50 pcs capacitors (different values) 50 pcs
Note: Tools, Equipment & Materials are on a per-workstation basis
II B - AMENDMENT TRAINING FACILITIES (TF)
Qualification : I ELECTRONIC PRODUCTS ASSEMEBEL Y AND SERVICING NC II
Existing Amendment
Recommended space requiremen s for the various teaching/learningareas are as

follows:
,
TEACHING/LEARNING! SIZE IN QTY TOTAL AREA
IN
FACILITIES AREAS METERS SQ.METERS
Lecture Area" 5x5 1 25
WorkshopArea0 5x5/ 5 workstations I 25 /
(2 rainees per Workstations) 9x5 1O workstations 45
1.5m x 2m
LearningResource Area 4x5 1 20
Tool Room/StorageArea 4x4 1 16 NO AMENDMENTS
Wash,Toilet & LockerRoom 2x3 2 12
Sub-Total 98 /
118
Facilities I Equipment/ 30/
Circulation... 36
Total Area 5 workstationsI 128 /
1O workstations 154
• Optional (good for minimum of 10 tninces)
.. For the workshop area (maximum of 20 trainr:e!)
,... Area requiremenits equwalent to 30% of the total teaching/learning•eas
II. C - AMENDMENT TRAINERS' QUALIFICATION lTQ)

Qualification : I ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II .,
Existing Amendment
• Holder of National TVET Trainer's Certificate (NTTC) • Holder of National TVET Trainer's Certificate (NTTC)
Level 1 Level 1 in Electronic Products Assembly and Servicing
• Must have at least 2-years relevant industry NC II
experience. • Must have at least 2-years relevant industry experience.
For RENEWAL:
• CPD units, work Immersion, relevant seminars/refresher
training will be accepted as part of the requirements for
renewal.
HUMAN HEALTH/HEALTH CARE SECTOR
Qualification Existing TEM Amendment TEM
Tools Tools
Hilot (wellness Description Qty Description Qty
massage) NC II Thermometer 10 Thermometer (digital) 10 pcs
Sphygmomanometer 5 Sphygmomanometer 5 pcs
Stethoscope 5 Stethoscope 5 pcs
Equipment Equipment
CD/DVDPlayer (CD/DVD) 1 Flash drive 1 pc
TV 1 TV 1 unit
OHP 1 Desktop/Laptop 1 unit
LCD Projector 1 unit
Whiteboard 1 Whiteboard/ Blackboard 1 pc
Stool 10 Stool 10 pcs
Trolley 2 Trolley 2 pcs
Massage Table: 3 Massage Table: 3 units
L = 1.8M L = 1.8M
W = 0.8M W=0.8M
H = 0.7 M H = 0.7 M
Materials Materials
Coconut Oil 5 btls. Coconut Oil 5 btls.
Banana Leaf Strips and Other 10 Banana Leaf Strips and Other 10 pcs
Leaves Leaves
Bath towels 10 Bath towels 10 pcs
Face towel/hand towel 30 Face towel/hand towel 30 pcs
Bed sheets 10 Bed sheets 10 pcs
Bowls 10 Bowls 10 pcs
Shorts 10 Shorts 10 pcs
Pillows 6 Pillows 6 pcs
Smock gowns/bath 10 Smock gowns/bath 10 pcs
robes/Malongs robes/Malongs
Gauze masks 10 Surgical/Cloth mask or any of the 10 pcs
kind
Pillow cases 10 Pillow cases 10 pcs
Alcohol (Ethyl)/Hand Sanitizer 5 Alcohol (Ethyl)/Hand Sanitizer 5 pcs
Basins 5 Basins 5 13cs
Couch Roll (Disposable Paper) 5 Couch Roll (Disposable Paper) 5 pcs
Whiteboard marker/ Chalk and 3 sets
eraser
References: Anatomy, References: Anatomy,
Physiology and First Aid Physiology and First Aid
Qualification: I HILOT (WELLNESS MASSAGE) NC II
Existing Amendment
3.5 TRAININGFACILmES
HILOT(WELLNESSMASSAGE)NC II
The Hilo ellness Massage)Therapy Leaming Facility must be of conaete structure.

Based on dass size of 20 students/ trainees the space requirements for the teaching I
learningand curriculum areas are as follo .
- SIZEIN AREAIN57 TOTALAREA iN
TEACHNiI LEARNMi AREAS METERS METERS SQ.METERS
LaboratOJY Alea 4X5 20 20 No Amendment
Leamina Resources Area 3X2 6 6
Wash Area/Comfort Room (male & 25X4 10 10
female)
Admn and Staff Room 4X5 20 20
Circulation Area 4X4 16 16
Total WorkshopArea 11hq.meters
II. C - AMENDMENT TRAINER'S QUALIFICATION {TQ)

Qualification: I HILOT (WELLNESSMASSAGE) NC II
Existing Amendment
■
Must be a certified Hilot Must be a certified Hilot
■
■
Must have undergone training on Training Must be a holder of National TVET Trainers Certificate
■
Methodology II (TMII) orholder of NTTC (NTTC) Level I in Hilot (Wellness Massage) NC II

Certificate for Healthcare Professionals Must be physically, emotionallyand mentally fit
■
■
Must be physically, emotionally and mentally fit Must possess good moral character
■
■
Must possess good moral character With at least 2 years experiencein the
■
■
With at least 2 years experience inthe healthcare services industry
health service industry
Tools Tools
Massage Therapy Description Qty Description Qty
NC II Aneroid Sphygmomanometer 5 pcs Aneroid Sphygmomanometer 5 pcs
Stethoscope 5 pcs Stethoscope 5 pcs
Digital Thermometer 5 pcs Digital Thermometer 5 pcs
*Anatomical dummy 1 pc. *Anatomical dummy 1 pc.
*Talking sphygmomanometer 1 pc. *Talking sphygmomanometer 1 pc.
*Talking thermometer 2 pcs. *Talking thermometer 2 pcs.
*Braille labeling paper 1 ream *Braille labeling paper 1 ream
Equipment Equipment
Massage Table (L-1.83 cm, W- 5 pcs. Massage Table {L:185cm, 5 pcs.
0.75 cm, H- 0.60 cm) W:75cm, H:60 cm)
Massage chair 1 pc. Massage chair 1 pc.
LCD projector 1 pc. LCD projector 1 pc.
Whiteboard/ Blackboard 1 pc. Whiteboard/ Blackboard 1 pc.
Music/DVD player and portable 1 unit Music/DVD player and portable 1 unit
PA system PA system
*Computer with screen reader 1 unit *Computer with screen reader 1 unit
Internet connection Internet connection
Printer 1 pc. Printer 1 pc.
Reception counter/ office table 1 pc. Reception counter/ office table 1 pc.
Lecture table 1 pc. Lecture table 1 pc.
Student chairs 15 pcs. Student chairs 15 pcs.
Cabinet I Display rack 1 pc. Cabinet I Display rack 1 pc.
Locker 1 unit Locker 1 unit
Book shelf 1 unit Book shelf 1 unit
Materials Materials
Fitted sheets (white) 5 pcs. Fitted sheets {white) 5 pcs.
Large bath towels (white) 30 pcs. Large bath towels (white) 30 pcs.
Face towels (white) 30 pcs. Face towels (white) 30 pcs.
Foot towel (white) 30 pcs. Foot towel (white) 30 pcs.
Hand towels (white) 30 pcs. Hand towels (white) 30 pcs.
cylindrical bolster pillow with 5 pcs. cylindrical bolster pillow with 5 pcs.
case (white) case {white)
Pillow 5 pcs Pillow 5 pcs
Pillow case 5 pcs. Pillow case 5 pcs.
Bathrobe 5 pcs. Bathrobe 5 pcs.
Cotton, 12 grams 15 pcs. Cotton, 12 grams 15 pcs.
Whiteboard marker and eraser 3 pcs. Whiteboard marker/ Chalk and 3 sets
eraser
Scrub suits 15 pcs. Scrub suits/Lab gown 15 sets
Lotion, 150 ml. 1 bottle Lotion, 150 ml. 1 bottle
Alcohol, 70% 150 ml. 30 Alcohol, 70% 150 ml. 30
bottles bottles
Face masks 15 pcs. Face masks 15 pcs.
Non- Mineral Massage Oil, 120 15 Non- Mineral Massage Oil,120 15
ml.portion plastic bottle) bottles ml. portion plastic bottle) bottles
Drinking water supply 1unit Drinking water supply 1unit
Hair cap 15 pcs.
* For use of PWD trainee/students
TVl's must enter into a Memorandum of Agreement with an enterprise which has the facilities that
provides the needs for PWD students/trainees including tools, equipment and materials listed in Section
3.4 of this TR.

Qualification: I MASSAGE THERAPY NC II
Existing Amendment
3.5 lRAINING FACILITIES
The Massage Therapi t Leaming Facility must be of concrete structure. Based on

dass size of 15 students/trainees, the minimum space requirements for the
teaching/learning and cumculum areas are as follows:
SIZE IN AREA IN TOTAL AREA

TEACHING/LEARNING AREAS METERS SO.M. QTY fSQ.M.l
Laboratory Area 5x7 35 1 35
Tool Room 3x5 15 1 15
Leaming Resources Area 4x5 20 1 20
Lecture/Training Room 5x6 30 1 30
No Amendment
Wash Area/Comfort Room (M/F) 2.5x4 10 1 10
Admin/Staff Room 5x5 25 1 25

Circulation Area 1 45
Change Room 5x5 25 1 25
TOTAL WORKSHOP AREA 205
II. C -AMENDMENT TRAINER'S QUALIFICATION (TQ)

Qualification: I MASSAGE THERAPY NC II
Existing Amendment
■
Must be a holder of National TVET ■
Must be a holder of National TVET Trainers
Trainers c;;ertificate Level I (NTTC) in Massage Therapy Certificate (NTTC) Level I inMassage Therapy NC
NC 11; those who will be delivering programs for the II (those who will be delivering programs for the
visually impaired must have appropriate training visually impaired must have appropriate training
methodology for such kind of client methodology for such kind of client);
■
Must have at least three (3) years work experience in ■
Must have at least 3 years work experience of
the health service industry combined industry (hands on) and teaching using
blended teaching method
II. A• LIST OF TOOLS, EQUIPMENT AND MATERIALS
Equipment Equipment
Pharmacy Services Description Qty Description Qty
NC Ill Executive Table 1 unit Executive Table 1 unit
Tables and Chairs for 25 Tables and Chairs for 25 25 sets
students students
Clerical Table 1 unit Clerical Table 1 unit
Whiteboard 1 pc. Whiteboard 1 pc
:
CD of PowerPoint presentation 1 unit CD of PowerPoint presentation 1 unit
' 1
LCD Projector 1 unit LCD Projector 1 unit
Laptop (for lecturer) 1 unit Laptop (for lecturer) 1 unit
Computer for administrative and 1 unit Computer for administrative and 1 unit
clerical work clerical work
Computer for technology 5 units Computer for technology 5 units
resource center and class resource center and class
demonstration demonstration
Telephone (for inquiries) 1 unit Telephone 1 unit
Tools/Materials AV Equipment 1 unit
Description Qty Sound System 1 unit
AV Equipment 1 unit Internet Connection 1 unit
Sound System 1 unit Air-conditioning Unit 1 unit
Internet Connection 1 unit Heat seal or press seal 1 unit
equipment
Air-conditioning Unit 1 unit Bio-refrigerator (or cabinet that 1 unit
looks like a ref inside)
Heat seal or press seal 1 unit
equipment Tools/Materials
Bio-refrigerator (or cabinet that 1 unit . Qty
Description
looks like a ref inside)
Formulary drugs/ non formulary 25 each Formulary drugs/ non formulary 25 pcs/
"\,
drugs for display and simulation drugs for display and simulation each
White boa.rd marker and eraser White board marker and eraser 3 sets
Cleaning materials for working, 1 set Cleaning materials for working, 1 set
swabbing, sweeping, swabbing, sweeping, disinfecting,
disinfecting, soaking, sterilizing soaking, sterilizing and or
and or cleaning equipment cleaning equipment
Hygrothermometer 1 each Hygrothermometer 1 pc
Top loading balance 1 unit Top loading balance 1 unit
Steel and porcelain spatulas 25 each Steel and porcelain spatulas 25 pcs/
size
Filtration setup (funnel, filter 5 each Filtration setup (funnel, filter 5 pcs/
paper, stand) paper, stand) each
Stirring rod 25 Stirring rod 25 pcs
Mortar and pestle* 2 units Mortar and pestle* 2 units
Graduated cylinder (100 ml, 10 Graduated cylinder (100 ml, 10 2 pcs/
ml) ml) size
Beakers (500 ml, 250ml, 100ml, Beakers (500 ml, 250ml, 100ml, 2 pcs/
50ml) 50ml) ize
Gloves 1 box Gloves 1 box
Re-sealable plastics 1000 Re-sealable plastics 1000
pcs
Tablet counter 5 Tablet counter 5 units
Bond Papers 1000 Bond Papers 1 ream
Labeling materials 500 Labeling materials 500 pcs
Referral forms 500 Referral forms 500 pcs
Bubble pack 5 Bubble pack 5 pcs
Aluminum foils 1 Aluminum foils 1 roll
Sharps disposal bin 1 pc
Disposal bins for infectious and 1 pc
non-infectious wastes
Storage of biologicals 1 unit
Flash Drive/USS, 128GB 1 pc
*Note: For demo purposes only
II. B - TRAINING FACILITIES (TFl

Qualification: I PHARMACY SERVICES NC Ill
Existing Amendment
Based on a class intake of 25 students/trainees
Soace Reauirement Size in Meters Area in Sa. Meters
StudenVTrainee Performance Space (S/TPS) 5x8 m. 40 sq. m.
Pharmacy simulation room {PSR) 2x3m. 6sq. m.
Technology Resource Center (TRC) 2x5m. 10 sq. m.
(S/TPS+PSR+TRC+CR) X 30%
Circulation Area 20 SQ. m.
(40+6+10+10) X 30%=19.8sq.m.)
No Amendment
Separate Restrooms for Male and Female Trainees/ 2x5m. 10 sq. m.
Students (CR)
Total Workshop Area 86sq. m.
fhe training center should have a simulation room of a pharmacy set-up (see Annex 1). The simulation room should
1ave shelves (see Annex 2) for dlsplay of products and a sink area at the minimum This simulation room may be
ntegrated within the S/TPS. In addition to that, partnership may be forged with an operating pharmacy or existing
>harmacy drug store where Candidates can visit and observe.
II. C - AMENDMENT TRAINER'S QUALIFICATION (TQ)

Qualification: I PHARMACY SERVICES NC Ill
Existing Amendment
■ Must be a holder of NTTC I in Pharmacy Must be a holder of National TVET Trainers
■
Services NC Ill Certificate (NTTC) Level I in Pharmacy Services NC

■ Must be a graduate of BS Pharmacy Ill
■ Must have at least 2 years job / pharmacy Must be a graduate of BS Pharmacy ■
industry experience Must have at least 2 years job / pharmacy

■
industry experience
Must not have any criminal record ■
II. A• LIST OF TOOLS, EQUIPMENT AND MATERIALS
Tools Tools
Emergency Medical Description Qty Description Qty
Services.NC II Mobile Phone 1 Mobile Phone 1 unit
Two-wayPortable Radio 1 Two-way Portable Radio 1 unit
' Plugs 1 Emergency Blinking Light 1 unit
(Battery Operated)
Flares 1 Visibility Vest 1 pc
Hand Signals 1 Suction Catheters 1 pc
Sputum cap 1 Thermal Scanner 1 pc
Suction Catheters 1 Sharps Disposable Container 1 pc
Thermometer 1 Basic Airway adjuncts 1 pc
HEPA/Surgical Masks 1 Sphygmomanometer 1 pc
Surgical Gloves 1 Stethoscope 1 pc
Goggles 1 Pulse Oximeter 1 pc
Strap 1 Traffic cones 5 pcs
Splint 1
Sling 1
Bandages 1
(triangular/elastic/rolled)
crutches 1
GPS 1
Surgical Gown 1
Haz-Mat Suit 1
.,
Ring Cutter 1
Equipment Equipment
I
Sphygmomanometer 1 Oxygen cylinder 1 unit

Oxygen cylinder 1 Oxygen Gauge 1 unit
Oxygen Gauge 1 Automated External Defibrillator 1 unit
Automated External Defibrillator 1 Stretcher 1 unit
Stretcher 1 Bag-Valve-Mask Device 1 unit
Bag-Valve-Mask Device 1 Scoop Stretcher 1 unit
Vacuum Mattress 1 Suction machine 1 unit
Scoop Stretcher 1 Nebulizer 1 unit
Wheelchair 1 Ambulance vehicle* 1 unit
Stethoscope 1 Ambulance Simulator** 1 unit
Suction machine 1 Dispatch Simulator** 1 unit
Nebulizer 1 BLS Mannequin 1 pc
Ambulance vehicle 1 Carry Chairs 1 pc
BLS Mannequin 1 X- Collar 1 pc
Carry Chairs 1 C-collar or any Spine restriction 1·pc
devices but not specific to brand
'• X- Collar 1 LCD Projector or LCD fiat 1 unit
screens
..Pulse Oximeter 1 Laptop/Desktop 1 unit
Capnography 1
Materials Materials
First Aid Kit 1 First Aid Kit 1 set
Thermal Blanket 1 Thermal Blanket 1 pc
02 non re-breather masks
1 02 non re-breather masks 1 pc
Heavy Duty Gloves 1 Ambulance Dressing Set 1 pc
Ambulance Dressing Set1 Maternity Gown 1 pc
Sharps Disposable Container
1 Cover-all PPE 1 pc
Basic Airway adjuncts 1 HEPA/Surgical Masks 1 pc
LCD Projector 1 Face Mask 25 pcs
Laptop/Desktop 1 Heavy Duty Gloves 1 pc
Disposal Latex or Nitrile Gloves 1 pc
Goaales 1 pc
Ear Muffs 1 pc
Strap 1 pc
Splint (Include in SAM Splints) 1 pc
Sling 1 pc
Bandages 1 pc
(triangular/elastic/rolled)
* In the absence of an institution owned Ambulance vehicle, an affiliation to agencies with Ambulance vehicle is ·
required.
**Required if AC does not own Ambulance vehicle

Qualification: I EMERGENCY MEDICAL SERVICES NC II
Existing Amendment
3.5 TRAINING FACILITIES TRAINING FACILITIES
A The EMERGENCYMEDICAL SERVICES NC II Leaming Facility must be of concrete A. The Emergency Medical Services Learning Facility must be of
structure.Based on class ze of 20 students I traniees,the space requirementsfor concrete structure. Based on class size of 20 students / trainees, the
the teaching/learning and curriculum areas are as follows. space requirements for the teaching / learning and curriculum areas are as
follows:
SIZE IN AREA TOTAL AREA SIZE IN AREA IN TOTAL
TEACHING/LEARNING AREAS METERS INS. QTY. IN SQ. METERS METERS SQ. AREA
METERS SPACE REQUIREMENT
METERS IN SQ.
LaboralOIV Area 5X10 50 1 50 METERS
Tool Room 2X5 10 1 10 Laboratory Area 4X5 20 20
Storage Room/ 4X5 20 1 20 Tool Room and S/Mstorage . 3X5 15 15
Leaming Resources Area 5X7 35 1 35 Area
Wash Are Comfort Roooi (male & • 2.5X4 10 1 10 Learninq Resources Area 5X7 35 35
female) Wash Area/ComfortRoom (male 2.5 X4 10 10
Admin and SlaffRoom 5X5 25 1 25 & female)
Cirrnlalion Area 1 30 Admin and Staff Room 4X5 20 20-
TotalWorkshop Area 180 Circulation Area 30
B. Affiliatiotonagencies withmedical ambulaoce ispreferred. Driving Area
C. Identifieodr Specified Area for Practice Ambulance Dnving Total Workshop Area 130 sq. m.
B. Identified Area for Driving can be outside the facility since it requires a bigger
outdoor area for needed maneuvers
II. C · AMENDMENT TRAINER'S QUALIFICATION lTQ)
Qualification: I EMERGENCY MEDICAL SERVICES NC II
Existing Amendment
• Must be a holder of NTTC Level I in • Must be a holder of National TVET Trainers
Emergency Medical Services NC II Certificate (NTTC) Level I in Emergency Medical
• Equivalent training/experience or accredited by Services NC II;
any of the following: Department of Health, Philippine • Must have undergone training on Emergency
College of Emergency Medicine, Philippine Society of Medical Services NC Ill or any other similar training
Emergency Care Nurses, Philippine Society of for Emergency Medical Technicians;
Emergency Medical Technician, Philippine Red • With at least 2 years experience in the
Cross, Bureau of Fire and Protection -EMS and emergency health care service (pre-hospital care);
Emergency Response Unit Foundation (ERUF) or
• With at least 2 years experience in the NOTE: Emergency health care service (pre-
emergency health care service (pre-hospital care) hospital care) experience should be evidenced by a
• Must be physically, emotionally and mentally fit Certificate of Employment or Service Record
a certified by a Licensed Philippine Physician
• Must not have any criminal record
II. A· AMENDMENT LIST OF TOOLS I EQUIPMENT AND MATERIALS
ICT SECTOR
CABLE TV (CATV) Tools Tools
INSTALLATION Item/ Description Qty Item/ Description Qty
NC II set of wrenches 3 set of wrenches 3 sets
Set of screwdrivers 3 Set of screwdrivers 3 sets
torque wrench 3 torque wrench 3 sets
F-open wrench 3 F-open wrench 3 sets
bolt cutter 1 bolt cutter 1 pc
cable cutter 3 cable cutter 5 pcs
NTcutter / blade cutter 3 NT cutter / blade cutter 5 pcs
Staple gun 3 Staple gun 5 pcs
Technician's knife 3 Technician's knife 5 pcs
Cable prep tool 3 Cable prep tool Ssets
set of hammer 2 set of hammer 3 sets
set of pliers 3 set of pliers Ssets
Coring tools 2 Coring tools 2 sets
Blow torch 2 Blow torch 2 pcs
Center conductors stripper 2 Center conductor's stripper 2 pcs
hacksaw 2
cable tensioner/ racheUcoping cable tensioner/ racheUcoping jack
1 1 unit
jack
Crimping/ compression tool 3 Compression Tool 3 pcs
cable guide 1 cable guide 1 unit
aerial handline 1 aerial handline 1 set
set of ropes 1 set of ropes 1 set
tape linen/steel tape 1 tape linen/steel tape 1 pc
multiple cable puller -1-
come-a-long/guy grip 1 Messsseger/ Guy grip 1 set
Step ladder 1 Step ladder 1 unit
fixing brackets/ clamps -1-
lay-up stick/ cable lifter 1 lay-up stick / cable lifter 1 unit
drill/electric drill (w/ bits of drill/electric drill (w/ bits of various
1 sizes) 1 unit
various sizes)
adjustable wrench 3 adjustable wrench 3 sets
extension ladders (24 ft. length) 1 extension ladders (24 ft. length) 1 unit
bender board/cable form 1 bender board/cable form (optional) 1 unit
messenger wire raising tool -1-
Diagonal side cutter 3 Diagonal side cutter 3 set
Additional Tools for fiber-optics:
Power Meter 1 unit
Buffer Tube Stripper 1 unit
Cable slitter 1 unit
Fiber stripper 1 unit
Kevlar cutter 1 unit
Alcohol dispenser 3 units
PON Meter 1 unit
Fiber Cleaver 1 unit
Fiber Fusion Splicer 1 unit
OTDR 1 unit
Fiber Optic Light Source 1 unit
Visual Fault Locator (VFL) 1 unit
Fiber Scope 1 unit
Fiber Connector Cleaner 1 unit
Equipment Equipment
VOM 3 Multitester 1 unit
lineman boom truck* 1 lineman boom truck* 1 unit
cable trailer* 1 cable trailer* 1 unit
reel stand* 1 reel stand* 1 unit
lashing machine* 1 lashing machine* 1 unit
Addressable box/converter 1 Set-top Box (STB) 1 unit
IPTV Box 1 unit
Power supply 1 Power supply 1 unit
Trunk amplifier 1 Trunk amplifier 1 unit
Line extender 1 Line extender 1·unit
Node 1 Node 1 unit
F.I. meter 1 F.I.meter 1 unit
In-house amplifier 1 In-house amplifier 1 unit
Cable modem 1
cable roller block (single or
1
multiple cable)
Service vehicle* 1 Service vehicle* 1 unit
Power inserter 1 Power inserter 1 unit
Splitter (2-way) 1 Splitter (2-way) 1 unit
directional coupler 1 directional coupler 1 unit
tap-offs (2-, 4-,8-ways) 3 tap-offs (2-, 4-,8-ways) 1 unit
LCP Closure 1 unit
Fiber Distribution Box/NAP 1 unit
PLC Splitter (1x4,1x8) 2 units
Customer premises
equipment:
TV set 1 TV set 1 unit
LCD/ plasma monitor with or LED / plasma monitor with or without 1 unit
1
without tuner** tuner**
Addressable box/ converter 1 Set Top Box (STB) 1·unit
IPTV Box 1 unit
Home theater equipment** 1 Home theater equipment** 1 unit
DVD /VCD /MP3 players 1 DVD /VCD /MP3 players 1 unit
Personal computers/ internet / Personal computers/ internet/ VoIP
1 1 unit
VoIP
Cable modem I router 1 Cable modem 1 unit
ONU/ONT 1 unit
Router/WiFi Access Point 1 unit
PPE: PPE:
body belt & strap body belt & strap 10 sets
hard haU helmet hard hat/ helmet 10 pcs

set gloves set gloves 10 pairs
safety shoes safety shoes 10 pairs
Safety goqqles Safety goQQles 10 paira
tool pouch/holster tool pouch/holster 10 pcs
safety cones/other collapsible safety cones/other collapsible signs 3 sets
signs
Materials Materials
messengered cable messengered cable 1 roll
set of suspension clamps set of suspension clamps 3 sets
pole extension arm pole extension arm 3 pcs
cable-loop form IX-frame cable-loop form / X-frame 5 pcs
pole insulator pole insulator 5 pcs
ground/guying insulator ground/guying insulator 5 pcs
pole clamps of various sizes pole clamps of various sizes 5·sets
guy protector guy protector 5 pcs
set of guy grips set of guy grips 5 sets
braces braces 5 sets
tie wrap tie wrap 5 sets
cable clip cable clip 5 sets
pole tag pole tag 5 sets
cable tag cable tag 5 sets
sets of washer, bolts and nuts sets of washer, bolts and nuts 5 sets
guying fixtures guying fixtures 5 sets
sets of washer, bolts and nuts, sets of washer, bolts and nuts, 5 sets
machine bolts machine bolts
machine bolts - straight, thimble- machine bolts - straight, thimble-eye 1 set
eye and bent types and bent types
stainless lashing wire stainless lashing wire 1 roll
lashing wire clamps lashing wire clamps 60 pcs
messenger-wire clamps messenger-wire clamps 60 ·cs
p
thimble eye nut thimble eye nut 60 pcs
stainless strap and buckle stainless strap and buckle 5 sets
cable roller cable roller 5 units
spiral sleeve spiral sleeve 5 pcs
standard rope standard rope 5 rolls
color coded marked tape color coded marked tape 5 rolls
extension arm extension arm 2 pcs
F-connectors (crimped or F-connectors (crimped or 5 sets
compression type) compression type)
grounding wire (gauge 12, grounding wire (gauge 12, stranded) 1 roll
stranded)
grounding rod (1/4' by 4' with grounding rod (1/4' by 4' with clamp) 5 pcs
clamp)
TW wire (gauge 12, stranded or TW wire (gauge 12, stranded or 1 roll
solid) solid)
screw hooks screw hooks 5 sets
lag screws lag screws 5 sets
terminators terminators 5 sets

sidewalk guy fixture sidewalk guy fixture 2 sets
bonding clamp bonding clamp 5 sets
anchor and grounding rods anchor and groundinQ rods 2 sets
cable support cable support 10 sets
cable spacer cable spacer 10 sets
adhesive tape adhesive tape 10 rolls
strand clamps strand clamps 10 sets
heat shrink heat shrink 10 sets
silicon gel
tap-off bracket
conduit/ GI pipes conduit/ GI pipes 1 tube
electric meter electric meter 1 unit
: circuit breaker circuit breaker 1 unit
Drop cable Coaxial Drop Cable 1 roll
cable tie cable tie 60 pcs
rubber boots rubber boots 5 pairs
grounding block grounding block 5 pcs
P-hook P-hook 5 pcs
Philippine Electronics Code (Book 3) 1 set
Materials for Fiber-optics:
Optical closure Optical closure 5 kits
Patchcord Patchcord (SC/APC,SC/UPC) 5 pcs
Pigtail Pigtail (SC/APC,SC/UPC) 5 pcs
Pole clamp Pole clamp, various sizes 5 sets
X-Frame Fiber Management X-Frame Fiber Management 5 sets
Preformed Wire ¼ Preformed Wire¼ 1 roll
Optical Adapter Optical Adapter 5 sets
Optical Distribution Frame (Patch Optical Distribution Frame (Patch 5 units
Panel) Panel)
Fusion Sleeves Fusion Sleeves 5 sets
3-bolt suspension clamp 3-bolt suspension clamp 5 sets
Cable Clip for Fiber Drop (Nail 200 pcs
Buckle or Screw Buckle)
House Bracket (C-Clamp/P-Hook) 2 sets
C-Clamp S-Type 2 sets
Fiber Distribution Box/NAP 2 sets
LCP Closure 2 sets
Cable Coiling Ring 2 sets
Stainless Steel Strap 3/8" x 0.40mm 2 sets
Stainless Buckle 3/8" 2 sets
Mid Span Clamp 2 sets
Cable Tie 80mmx2.5mm 60 pcs
Fiber Drop Cable 2 sets
Customer Terminal Box 2 sets
Fiber Mechanical Connector/FIG 2 sets
(SC/APC,SC/UPC)
ONU/ONT 2 sets
Alcohol 99.9% lsopropyl Alcohol 99.9% lsopropyl 1 liter
Tissue paper Tissue paper 6 rolls
Trash Bin 2 pcs
II. B · AMENDMENT TRAINING FACILITIES {TF)

ICT SECTOR
Qualification : I CABLE TV (CATV) INSTALLATION NC II
Existing Amendment
Recommended space requirements for the various teachingneaming areas

are as follows:
TEACHING/LEARNING AREAS SIZE IN AREAIN QTY TOTAL AREA

METERS SQ.M IN SQ.M
(M)
LectureArea 6x5 30 1 30
LaboratoryArea 6XS 30 1 30
LeamingResourceArea 4x5 20 1 20 NO AMENDMENTS

ToolRoom/StorageArea 4x4 16 1 16
Wash,Toilet & LockerRoom 2x5 10 2 20
Total 116
Facilities/ Equipment/ Circulation• 35
Total Area 151

'Area requirement Is equfva/fflt to 30% of the tote/ teech/flf1le•rnlng ereas
II. C · AMENDMENT TRAINERS' QUALIFICATION (TQ)

ICT SECTOR
Qualification : I CABLE TV (CATV) INSTALLATION NC II
Existing Amendment
• Must' be a holder of TESDA Cable TV(CATV) • Must be a holder of National TVET Trainer's Certificate
lnstaflation NCIIor equivalent {NTTC) Level 1 in Cable TV(CATV) Installation NCII
• Must have completed Training Methodology II {TM • * Must have at least 3-years relevant industry experience.
II) course or equivalent • Must be physically fit.
• * Must have at least 5-years relevant industry
experience.
• Must be physically & mentally fit.
*Optional:.Only when required by thehiring institution

II. A - AMENDMENT LIST OF TOOLS I EQUIPMENT AND MATERIALS
ICT SECTOR
CABLE TV Tools/Instrument Tools/Instrument
OPERATION & Item/ Description Qty Item Description Qty
MAINTENANCE Test Instruments
NC Ill Signal-level meter (SLM) 5 Signal-level meter (SLM) 5 units
digital VOM 5 Multitester 5 units
spectrum analyzer 1 spectrum analyzer 1 unit
power meter 2 Optical Power Meter (OPM) 2 units
TV receiver/monitor 5 TV receiver/monitor 5 units
PON Meter 2 units
OTDR 1 unit
Visual Fault Locator (VFL) 2 units
Fiber Optic Light Source 2 units
Fiber Scope 2 units
Fiber Connector Cleaner 2 units
Tools
set of screw drivers 5 sets set of screw drivers 5 sets
electrical pliers 5 pcs electrical pliers 5 pcs
set of wrenches 5 pcs set of wrenches 5 pcs
safety ladder 2 pcs safety ladder 2 pcs
long nose plier 5 pcs long nose plier 5 pcs
diagonal side cutter 5 pcs diagonal side cutter 5 pcs
cable cutter 5 pcs cable cutter 5 pcs
crimping tools 5 pcs Compression tools 5 pcs
cable prep tools 5 pcs cable prep tools 5 pcs
.. NT cutter 5 pcs NT cutter 5 pcs
Equipment Equipment
agile modulator 1 agile modulator 1 unit
agile demodulator 5 agile demodulator 5 units
fixed modulator 5 fixed modulator 5 units
signal processor 3
signal combiner/mixer 1 signal combiner/mixer 1 unit
audio equalizer 1 audio equalizer 1 unit
superheterodyne processor 1
power divider 1 power divider 1 unit
splitter 5 splitter 5 units
directional couplers 5 directional couplers 5 units
power inserter 1 power inserter 1 unit
line equalizer 1 line equalizer 1 unit
AVR 2 UPS 2 units
Spare power supply module 1 Spare power supply module .1unit
Yagi antenna 2 Yagi antenna 2 sets
TVRO system equipment 1 set TVRO system equipment 1 set
Antenna preamps 2 Antenna preamps 2 sets
. Equipment Rack 2 units
Power Strip 2 units
OLT 1 unit
Optical Distribution Frame (ODF) 1 unit
PPEs
Safety belt 5 pcs Safety belt 5 pcs
Rubber gloves 25 pairs Rubber gloves 25 pairs
Safety shoes 25 pairs Safety shoes 25 pairs
Hard haU helmet 25 Hard haU helmet 25 pcs
Safety goggles 5 pcs Safety goggles 5 pcs
Materials Materials
RG-6 coaxial cable RG-6 coaxial cable 1 box
connectors F Connectors 5 sets
hardwares, supplies and spare hardwares, supplies and sp re 5 sets
parts parts
heat shrink heat shrink 5 sets
silicon gel
electrical tapes electrical tapes 5 rolls
fuses fuses 5 sets
technical manuals technical manuals 1 set
Spare active and passive devices Spare active and passive devices 2 sets
Coaxial cables Coaxial cables 1 roll/box
Weatherproofing materials Weatherproofing materials 2 sets
Fiber Drop Cables 2 sets
LCP Closures 2 sets·
Fiber Distribution Box/NAP 2 sets
Fiber Mechanical 2 sets
Connectors/FIG(SC/APC,
SC/UPC)
Philippine Electronics Code 1 set
(Book 3)
II. B • AMENDMENT TRAINING FACILITIES (TF)
ICT SECTOR
Qualification : I CABLE TV OPERATION & MAINTENANCE NC 111
Existing Amendment
3.5 TRAINING°FACIUTIES
Based on class size of 25 students/trainees the space requirements for

the teachlngnearnlng and circulation areas are as follows:
TEACHINGILEARNING SIZ.EIN AREA INSQ. QTY TOTAL AREA IN

AREAS METERS METERS SQ.METERS
Lecture Area 5x8 40 1 40
Laboratotv/SimulatlonArea Gx8 48 1 48
Leaming Resource Area 4x5 20 1 20 NO AMENDMENTS

Wash.Toilet & Locker Room 2x5 10 2 20
Total 128
Facllltles /Equipment/ 37
Circulation""
Total Area 165
** Area requirement is equivalent to 30% of the total teachinglleaming areas
II. C · AMENDMENT TRAINERS' QUALIFICATION lTQl

ICT SECTOR
Qualification : I CABLE TV OPERATION & MAINTENANCE NC Ill
Existing Amendment
• Must be a holder of TESDA Cable TV (CATV) • Must be a holder of National TVET Trainer's Certificate
Operation and Maintenance NC Ill or (NTTC) Level 1 in Cable TV (CATV) Operationand
equivalent Maintenance NC Ill
• Must have completed Training Methodology Ill (TM • Must have at least 5-years relevant industry experience.
111) course or equivalent • Must be physically & mentally fit.
• * Must have at least 5-years relevant industry
experience.
*Optional: Only whenrequired by the hiring institution

II. A· AMENDMENT LIST OF TOOLS I EQUIPMENT AND MATERIALS
ICT SECTOR
TELECOM OSP Tools Tools
AND Item/ Description Qty Item/ Description Qty
SUBSCRIBER set of wrenches 5 set of wrenches 5 sets
LINE Set of screwdrivers 10 Set of screwdrivers 10 sets
INSTALLATION torque wrench 10 torque wrench 10 sets
(COPPER F-open wrench 10 F-open wrench 10 sets
CABLE/POTS AND bolt cutter 3 bolt cutter 3 PCS
DSL) NC II cable slitter 5 cable slitter 5 pcs
Electrician scissors 5 Electrician scissors 5 PCS
Staple gun 3 Staple Qun 3 pcs
Technician's knife 3 Technician's knife 3 pcs
Cable prep tool 5 Cable prep tool 5 pcs
set of pliers 10 set of pliers 10 sets
BorinQ tools 5 Borinq tools 5 sets
Blow torch 5 Blow torch 5 pcs
Poly knife 10 Poly knife 10 pcs
hacksaw 5 hacksaw 5 pcs
cable tensioner/ rachet/ coping jack 5 cable tensioner/ racheU coping jack 5 units
Crimping/ compression tool 10 Crimpinq/ compression tool 10 PCS
cable quide 5 cable quide 5 pc
aerial handline 10 aerial handline 10 pcs
,.
set of ropes 5 set of ropes 5 sets
tape linen/steel tape 10 tape linen/steel tape 10 pcs
Manhole hook 5 Manhole hook 5 PCS
Manhole Ladder 10 ft 5 Manhole Ladder 10 ft 5 units
Extension Ladder 20ft 5 Extension Ladder 20ft 5 units
fixinq brackets/ clamps 5 fixing brackets/ clamps 5 pcs
lay-up stick/ cable lifter 5 lay-up stick / cable lifter 5 pcs
extension ladders (24 ft. length) 5 extension ladders (24 ft. length) 5 units
drill/electric drill (w/ bits of various drill/electric drill (w/ bits of various
5 5 sets
sizes) sizes)
qimlet 10 Qimlet 10 units
Equipment EQuipment
Line extender* Line extender* 1 unit
Service vehicle* Service vehicle* 1 unit
lineman boom truck* 1 lineman boom truck* 1 unit
cable trailer* 1 cable trailer* . 1 unit
reel stand* 1 reel stand* 1 unit
lashing machine* 1 lashing machine* 1 unit
Manhole pump 1 Manhole pump 1 unit
J
Power supply 1 Power supply ' 1 unit

Trunk amplifier 1 Trunk amplifier 1 ·nit.
u
TV set 1
LCD 1 TV set/ LCD projector 1 unit
Karaoke 1
microphone 1
DVD NCO /MP3 players 1
Personal computers w/ internet 1 Personal computers w/ internet 1 unit
PPE: PPE:
Safety goggles 5 Safety goggles 5 pairs
set gloves 10 set gloves 10 pairs
hard hat/ helmet 10 hard hat/ helmet 10 pcs
body belt & strap 5 body belt & strap 5 sets
tool pouch/holster 5 tool pouch/holster 5 pcs
safety cones/other collapsible signs safety cones/other collapsible
3 signs 3 pcs
Rain coat 5 Rain coat 5 pcs
Materials Materials
messengered cable 1 roll messengered cable 1 roll
set of suspension clamps 3 set of suspension clamps 3 sets
pole extension arm 3 pole extension arm 3 pcs
Pressure testing valve 5 Pressure testing valve 5 pcs
pole insulator 5 pole insulator 5 sets
ground/guying insulator 5 ground/guying insulator 5 sets
pole tag 5 pole tag 5 sets
cable tag 5 cable tag 5 sets
sets of washer, bolts and nuts, sets of washer, bolts and nuts,
10 10 sets
machine bolts machine bolts
machine bolts - straight, thimble- machine bolts - straight, thimble:
1 1 set
eye and bent types eye and bent types
stainless lashing wire 1 roll stainless lashing wire 1 roll
lashing wire clamps 60 lashing wire clamps 60 pcs
standard rope 5 standard rope 5 rolls
color coded marked tape 5 color coded marked tape 5 rolls
extension arm 2 extension arm 2 pcs
Closure kits 5 Closure kits 5 pcs
grounding wire (gauge 12, grounding wire (gauge 12,
1 rl 1 roll
stranded) stranded)
grounding rod (1/4' by 4' with grounding rod (1/4' by 4' with
clamp) 5 clamp) 5 pcs
Cable clamps 5 Cable clamps 5 sets
screw hooks 5 sets screw hooks 5 sets
lag screws 5 lag screws 5 sets
UY-Connetors 5000 UY-Connetors 5000 pcs
sidewalk guy fixture 2 sidewalk guy fixture 2 sets
bonding clamp 5 bonding clamp 5 set_s
anchor and grounding rods 2 anchor and grounding rods 2 sets
cable support 10 cable support 10 sets
cable spacer 10 cable spacer .. 10 sets
adhesive tape 10 adhesive tape 10 rolls
strand clamps 10 strand clamps 10 sets
cable tie 60 cable tie 60 pcs
rubber boots 5 rubber boots 5 pairs
soap 1 Soap/Detergent 1 pc
Alcohol, 70% solution 1 liters
* Optional
II. B - AMENDMENT TRAINING FACILITIES (TF)
ICT SECTOR
Qualification : I TELECOM OSPAND SUBSCRIBER LINE INSTALLATION (COPPER CABLE/POTS AND
DSL) NC II
Existing Amendment
Estimated for maximumof 15 ax

Recommended space requirements for the various teachingnearning areas
+ are as follows:
TEACHING/LEARNING AREAS SIZE IN AREA IN QTY TOTAL AREA
METERS (M) SQ.M INSQ.M
ectureArea 6x5 30 1 30
Laboratory Area 10X10 100 1 100

Leaming Resource Area 6x7 42 1 42 NO AMENDMENTS
Tool Room/storageArea 5x5 25 1 25
Total 159
Facilities/ Equipmen / Circulation' 60
Total Area 19
CJ
*Arcarequirement is equivalent to 30%of the total teachingAeaming areas
II. C - AMENDMENT TRAINERS' QUALIFICATION (TQ)

ICT SECTOR
Qualification : I TELECOM OSPAND SUBSCRIBER LINE INSTALLATION (COPPER CABLE/POTS AND
DSL) NC II
Existing Amendment
• Must be a holder of Telecom OSP and • Holder of National TVET Trainers Certificate Level 1
Subscriber line Installation (Copper Cable/POTS in Telecom OSP and Subscriber line Installation
and DSL) NC II or equivalent (Copper Cable/POTS and DSL) NC II
• Holder of National TVET Trainers Certificate • Must have at least 3-years relevant industry
Level I experience.
• * Must have at least 5-years relevant industry • Must be physically & mentally fit.
experience.
* Optional: Only when required by the hiring

institution.
II. A-AMENDMENT LIST OF TOOLS, EQUIPMENT AND MATERIALS
ICT SECTOR
TELECOMOSP Tools/Instrument Tools/Instrument
INSTALLATION Item/ Description Qty Item Description Qty
(FIBER OPTIC set of wrenches 5 set of wrenches 5 sets
CABLE) NC II Set of screwdrivers 5 Set of screwdrivers 5 sets
torque wrench 5 torque wrench 5 sets
F-open wrench 5 F-open wrench 5 sets
bolt cutter 1 bolt cutter 1 unit
cable cutter/slitter 5 cable cutter/slitter 5 pcs
NT cutter / blade cutter 5 NT cutter / blade cutter 5 pcs
Polyethylene knife 5 Polyethylene knife 5 pcs
Cable prep tool 5 Cable prep tool 5 pcs
set of pliers 5 set of pliers 5sets
Boring tools 3 Boring tools 3 sets
hacksaw 5 pcs
hacksaw 5
Electric grinder 3 units
cable tensioner/ rachet/ coping cable tensioner/ rachet/ coping
5 5 units
jack jack
Fiber optic Stripper 5 Fiber optic Stripper 5 units
cable guide 1 cable guide 1 unit
aerial hand-line 5 aerial hand-line 5 units
Buffer tube cutter 5 Buffer tube cutter 5 units
tape linen/steel tape 5 tape linen/steel tape 5 pcs
multiple cable puller* 5 multiple cable puller* 5 units
come-a-long/guy grip* 1 come-a-long/guy grip* 1 unit
Manhole ladder 5 Manhole ladder 5 unit
FIBER OPTICS FIBER OPTICS
fixing brackets/ clamps 1 fixing brackets/ clamps 1 unit
lay-up stick / cable lifter 1 lay-up stick / cable lifter 1 unit
drill/electric drill (w/ bits of drill/electric drill (w/ bits of
1 1 unit
various sizes) various sizes)
extension ladders (24 ft. length) 5 extension ladders (24 ft. length) 5 units
bender board/cable form 1 bender board/cable form 1 unit
messenger wire raising tool 1 messenger wire raising tool 1 unit
Equipment Equipment
cable roller block (single or cable roller block (single or
1 1 unit
multiple cable)* multiple cable)*
Service vehicle* 1 Service vehicle* 1 unit
Power Meter 3 Power Meter 3 unit
OTDR 3 OTDR 3 unit
Visual Fault Locator 3 Visual Fault Locator 3 unit
Kevlar cutter 5 Kevlar cutter 5 unit
.
Alcohol dispenser 5 Alcohol dispenser 5 unit
Laser Source 3 Laser Source 3 unit
Fusion Machine 3 Fusion Machine 3 unit
Mechanical Splicing Kit 3 Mechanical Splicing Kit 3 kits
PPE: PPE:
body belt & strap 5 body belt & strap 5 sets
hard haU helmet 5 hard hat/ helmet 5 pcs
set gloves 5 set gloves 5 sets
safety shoes 5 safety shoes 5 pairs
Safety goggles 5 Safety goqqles 5 pairs
tool pouch/holster 5 tool pouch/holster 5 pcs
. safety cones/other collapsible safety cones/other collapsible
signs 3 signs 3 sets
rubber boots 5 rubber boots 5 pairs

Optical closure kit 5 Optical closure kit 5 kits
Patchcord 5 Patchcord 5 pcs
Pigtail 5 Pigtail 5 pcs
Protection Sleeves 100 Protection Sleeves 100 pcs
Tissue paper 10
Alcohol 99.9% 5 bot Alcohol 99.9% 5 bot
Fiber optic cable 12C 50m Fiber optic cable 12C 50 m
Mechanical Connector 100pcs Mechanical Connector 100 pcs
Materials Materials
set of suspension clamps 3 set of suspension clamps 3 sets
pole extension arm 3 pole extension arm 3 sets
cable-loop form / X-frame 5 cable-loop form / X-frame 5 sets
ground/guying insulator 5 ground/guying insulator 5 sets
pole clamps of various sizes 5 pole clamps of various sizes 5 sets
guy protector 3 guy protector 3 sets
set of guy grips 3 set of guy grips 3 sets
cable clip 5 cable clip 5 sets
lag screws 5 lag screws 5 sets
sets of washer, bolts and nuts, sets of washer, bolts and nuts,
5 5 sets
machine bolts machine ,bolts
stainless lashing wire 1 roll stainless lashing wire 1 roll
lashing wire clamps 10 lashing wire clamps 10 sets
screw hooks 5 screw hooks 5 sets

bonding clamp 5 bonding clamp 5 sets
anchor and grounding rods 5 anchor and grounding rods 5 sets
cable spacer 60 cable spacer 60 pcs
grounding wire (gauge 12, grounding wire (gauge 12,
1 rl 1 rl
stranded) stranded)
adhesive tape 5 rolls adhesive tape 5 rolls
I cable tie 6" 60 pcs I cable tie 6" 60 pcs
* Optional
II. B · AMENDMENT TRAINING FACILITIES ffF)

ICT SECTOR
Qualification : I TELECOM OSP INSTALLATION (FIBER OPTIC CABLE) NC II
Existing Amendment
Recommended space requirements for the various teaching/learning areas

are as follows:
TEACHING/LEARNINGAREAS SIZE IN AREA IN QTY TOTAL AREA

METERS(M) SQ.M INSQ.M
LectureArea 6x5 30 1 30
LaboratoryArea 10x10 100 1 100
LeamingResourceArea 4x5 20 1 20 NO AMENDMENTS

ToolRoom/StorageArea 4x4 16 1 16
Total 116
Facilities/ Equipment/ Circulation• 35
Total Area 151
•Area requirementis equivalent to'°"of the total teaching/learning areas
II C · AMENDMENT TRAINERS' QUALIFICATION (TQ)

ICT SECTOR
Qualification : j TELECOM OSP INSTALLATION (FIBER OPTIC CABLE) NC II
Existing Amendment
• . Must be a holder of Telecom Installation (Fiber • Holder of National TVET Trainers Certificate Level 1
Optic Cable) NC II or equivalent in TelecomInstallation (Fiber Optic Cable) NCII
• Holder of National TVET Trainers Certificate • Must have at least 3-years relevant industry
Level I experience.
• * Must have at least 5-years relevant • Must be physically & mentally fit.
industry experience.
II. A. - LIST OF TOOLS, EQUIPMENT AND MATERIALS
MARITIME SECTOR
Tools and Instruments Tools and Instruments
Marine Electrician pliers 12 pcs Electrician pliers 12 pcs
Electricity Long nose pliers 12 pcs Long nose pliers 12 pcs
NC II Diagonal cutting plier 12 pcs Diagonal cutting plier 12 pcs
Water pump plier 12 pcs Water pump plier 12 pcs
Flat screw driver 12 sets Flat screw driver 12 sets
Wire splicer 12 pcs Wire splicer 12 pcs
Philips screw driver 12 sets Philips screw driver 12 sets
Stubby screw driver (flat and Philips) 12 sets Stubby screw driver (flat and 12 sets
Philips)
Offset screw driver 12 sets Offset screw driver 12 sets
Spanners 12 sets Spanners 12 sets
Allen wrench 12 sets Allen wrench 12 sets
Adjustable wrench 12 pcs Adjustable wrench 12 pcs
Pipe wrench 12 pcs Pipe wrench 12 pcs
Pipe cutter 12 pcs Pipe cutter 12 pcs
Tube bender 12 sets Tube bender 12 sets
Knock out punch 2 sets Knock out punch 2 sets
Star screw driver 12 sets Star screw driver 12 sets
Electrician knife 12 pcs Electrician knife 12 pcs
Pipe reamer 3 pcs Pipe reamer 3 pcs
Hacksaw frame 12 pcs Hacksaw frame 12 DCS
.
Files 2 sets Files 2 sets
Ballpeen hammer 12 pcs Ballpeen hammer 12 pcs
Drill set 2 sets Drill set 2 sets
Bearing puller 6 sets Bearing puller 6 sets
Center puncher 6 pcs Center puncher 6 pcs
Pin puncher 6 sets Pin puncher 6 sets
Scriber 6 sets Scriber 6 sets
Crimping tool 6 sets Crimping tool 6 sets
Multi-tester 12 units Multi-tester (analogue) 6 units
Multi-tester (digital) 6 units
Clamp meter 12 units Clamp meter· 12 units
Me!:mer 12 units Meqqer 12 units
Hand tachometer 6 units Hand tachometer 6 units
Thermometer 6 pcs. Thermometer 6 pcs.
Portable face sequence tester 2 units Portable face sequence tester 2 units
Equipment Equipment
Hot air blower 6 pcs Hot air blower 6 pcs
. Portable electric drill 6 pcs Portable electric drill 6 pcs
Temperature calibrator 6 units Temperature calibrator 6 units
Pressure calibrator 6 units Pressure calibrator 6 units
Capacitor start motor (220 V 60 HZ, ½ 6 units Capacitor start motor (220 V 60 6 units
HP) HZ,½ HP)
Capacitor run motor (220 V 60 HZ, ½ 6 units Capacitor run motor (220 V 60 6 units
HP) HZ,½ HP)
Capacitor start and run motor (220 V 6 units Capacitor start and run motor 6 units
60 HZ,½HP) (220 V 60 HZ, ½ HP)
Universal motor (220 V 60 HZ, ½ HP) 6 units Universal motor (220 V 60 HZ, 6 units
½ HP)
Shaded pole motor (1/8 HP) 6 units Shaded pole motor (1/8 HP) 6 units
Series DC motor (120 V) 6 units Series DC motor (120 V) 6 units
Shunt DC motor (1/2 HP) 6 units Shunt DC motor (1/2 HP) · 6 units
Compound DC motor (1/2 HP) 6 units Compound DC motor (1/2 HP) 6 units
Single voltage squirrel cage induction 6 units Single voltage squirrel cage 6 units
motor (220 V 60 HZ, 1 HP) induction motor (220 V 60 HZ, 1
HP)
Dual voltage six leads squirrel cage 6 units Dual voltage six leads squirrel 6 units
induction motor (220 V 60 HZ, 1 HP) cage induction motor (220 V 60
HZ, 1 HP)
Dual voltage 9 leads wye-squirrel 6 units Dual voltage 9 leads wye- 6 units
cage induction motor (220 V 60 HZ, 1 squirrel cage induction motor
HP) (220 V 60 HZ, 1 HP)
Dual voltage 9 leads delta squirrel 6 units Dual voltage 9 leads delta 6 units
cage induction motor (220 V 60 HZ, 1 squirrel cage induction motor
HP) (220 V 60 HZ, 1 HP)
3 phase slip ring motor (220 V 60 HZ, 6 units 3 phase slip ring motor (220 V 6 units
1 HP) 60 HZ, 1 HP)
2-speed separate winding 3-phase 6 units 2-speed separate winding 3- 6 units
motor (220 V 60 HZ, 1 HP) phase motor (220 V 60 HZ, 1
HP)
DOL starter (1 HP, 220 V) 2 units DOL starter (1 HP, 220 V) 2 units
Reversible starter(1 HP, 220 V) 2 units Reversible starter(1 HP, 220 V) 2 units
Wye delta starter (220 V) 2 units Wye delta starter (220 V) 2 units
Reduced voltage auto transformer 2 units Reduced voltage auto 2 units
starter (220 V transformer starter (220 V
2-speed separate winding starter (220 2 units 2-speed separate winding 2 units
V 60 HZ) starter (220 V 60 HZ)
3 phase AC generator set (10 KVA, 1 set 3 phase AC generator set (10 1 set
220 V 60 HZ) KVA, 220 V 60 HZ)
Transformer (dual voltage induction Transformer (dual voltage
type) induction type)
Quick push pull connector 50 pcs. Quick push pull connector 50 pcs.
10 m plastic tubing 10 pcs. 10 m plastic tubing 10 pcs.
3/2-way normally closed push button 10 pcs. 3/2-way normally closed push 10 pcs.
valve button valve
3/2-way normally detented push 5 pcs. 3/2-way normally detented 5 pcs.
button, spring reset push button, spring reset
5/2-way detented pushbutton, spring 5 pcs. 5/2-way detented pushbutton, 5 pcs.
reset spring reset
Pressure gauge 10 pcs. Pressure gauge 10 pcs.
3/2-way roller lever valve 10 pcs. 3/2-way roller lever valve 10 pcs.
5/2-way air actuated valve 5 pcs. 5/2-way air actuated valve 5 pcs.
5/2-way double air actuated valve 15 pcs. 5/2-way double air actuated 15 pcs.
valve
Shuttle valve (OR) 5 pcs. Shuttle valve (OR) 5 pcs.
Two pressure valve 10 pcs. Two pressure valve 10 pcs.
Time delay valve 5 pcs. Time delay valve 5 pcs.
Quick exhaust valve 5 pcs. Quick exhaust valve 5 pcs.
One way flow control valve 10 pcs. One way flow control valve 10 pcs.
Pressure sequence valve 5 pcs. Pressure sequence valve 5 pcs.
Single acting cylinder 5 pcs. Single acting cylinder 5 pcs.
Double acting cylinder 5 pcs. Double acting cylinder 5 pcs.
On/off valve with filter regulator 5 pcs. On/off valve with filter regulator 5 pcs.
Pressure regulating valve 5 pcs. Pressure regulating valve 5 pcs.
Manifold 5 pcs. Manifold 5 pcs.
3/2 way pneumatic actuated, one side 5 pcs. 3/2 way pneumatic actuated, 5 pcs.
one side
3/2 way valve with selector switch, 5 pcs. 3/2 way valve with selector 5 pcs.
NC switch, NC
Proximity switch cyl. attachment 10 pcs. Proximity switch cyl. attachment· 10 pcs.
Materials Materials
Magnetic contactors Magnetic contactors 12 pcs.
Thermal overload relay Thermal overload relay 5 pcs.
Start push button Start push button 5 pcs.
Stop push button Stop push button 5 pcs.
Reversible push button (2 CKT) Reversible push button (2 CKT) 5 pcs.
Pilot lamp Pilot lamp 5 pcs.
Auxiliary relay Auxiliary relay 12 pcs.
On-delay timer On-delay timer 5 pcs.
Off-delay timer Off-delay timer 5 pcs.
Latching relay Latching relay 5 pcs.
Miniature circuit breaker Miniature circuit breaker 5 pcs.
Stranded wires (nos.14, 16) Stranded wires (nos.14, 16) 5 pcs. (1
meter
each)
Terminal lugs Terminal lugs 5 pcs.
Connecting leads Con_necting leads 5 pcs.
Pressure switch Pressure switch 5 PGS.
Limit switches Limit switches 5 pcs.
Float switch Float switch 5 pcs.
Selector switch Selector switch 5 pcs.
Reed switch Reed switch 5 pcs.
Fluorescent lamp fixtures Fluorescent lamp fixtures 5 pcs.
TunQsten haloQen lamp fixtures TunQsten haloQen lamp fixtures 5 pcs.
High pressure sodium lamp fixtures High pressure sodium lamp 5 pcs.
fixtures
Mercury vapor lamp fixtures ---
Explosionproof lamp fixtures Explosion proof lamp fixtures 5 pcs.
MARITIME SECTOR
Qualification : I Marine Electricity NC II -

Existing Amendment
3.5 TRAINING FACILITIES FOR MARINE ELECTRICITY NC II
Based on a class size of 12 students / trainees, the required size of

training facility is indicated below.
SPACE
No Amendments
SIZE IN METERS AREA IN SQ. TOTAL AREA IN
REQUIREMENT METERS SQ.METERS
Lecture Room (Job/ 7.00x 6.00 42.00 42.00
Site/ School
Trainee Working Space 2.50x 2.00 I 5.00 per trainee 60.00
trainee
Lecture Resource 4.00x 5.00 20.00 20.00
Center
• Administration/ 30.00
Faculty
Total Workshop Area 152.00
II. C - AMENDMENT TRAINERS QUALiFiCATION (TQ)

MARITIME SECTOR
Qualification : I Marine Electricity NC II

Existing Amendment
• Must be at least a graduate of BSEE/BSECE • Holder of National TVET Trainer Certificate Level
• Must be a licensed Electrical Engineer or Registered I (NTTC Level I) in Marine Electricity NC 11
Electronics and Communications Engineer • Must be at least a graduate of BSEE/BSECE
• Must have at least a total of 2 years as electrical • Must be a licensed Electrical Engineer or
officer on board Registered Electronics and Communications
• Must be physically and mentally fit Engineer
• Must have at least a one (1) year as electrical
. ••Must have a good moral character
Must be good in communicating in English officer on board or one (1) YEAR AS Electrical
• Must have undergone Trainor's Training /Trainor's Engineer on a Ship Repair or Ship Construction
Methodology Course • Must be physically fit
• Must possess good communication skills
-MARITIME SECTOR
Tools Tools
Ship's Catering Square table 2 pcs. Square table 2 pcs.
Services NC I Dining Chairs 8 pcs. Dining Chairs 8 pcs.
Round Trays 3 pcs. Round Trays 3 pcs.
Rectangular Trays 3 pcs Rectangular Trays 3 pcs
Cloth Table napkins 6 pcs. Cloth Table napkins 6 pcs.
Table Cloth 2 pcs. Table Cloth 2 pcs.
Goblet Glass rack 1 pc Goblet Glass rack 1 pc
High ball Glass rack 1 pc. High ball Glass rack 1 pc.
Plate rack 1 pc. Plate rack 1 pc.
Coffee Urn 1 pc. Coffee Urn 1 pc.
' Cork screw 1 pc. Cork screw 1 pc.
Sugar and creamer set 1 set Sugar and creamer set 1 set
Ashtray 2 pcs. Ashtray 2 pcs.
Toothpicks dispenser 2 pcs. Toothpicks dispenser 2 pcs.
Coffee cup and saucer 6 sets Coffee cup and saucer 6 sets
Show plate 12 Show plate 12
pcs. pcs.
Salt Pepper Shaker 2 sets Salt Pepper Shaker 2 sets
Tea spoon 6 PCS. Tea spoon 6 pcs.
Dinner Spoon 6 pcs. Dinner Spoon 6 pcs.
Dinner Fork 6 pcs. Dinner Fork 6 pcs.
Bread baskets 4 pcs Bread baskets 4 pcs
Fish knife 6 pcs. Fish knife 6 pcs.
Salad knife 6 pcs. Salad knife 6 pcs.
Dinner Knife 6 pcs. Dinner Knife 6 pcs.
Butter spreader 6 pcs Butter spreader 6 pcs
Dessert spoon 6 pcs. Dessert spoon 6 pcs.
Cocktail fork 6 pcs. Cocktail fork 6 pcs.
Salad fork 6 pcs. Salad fork 6 pcs.
Demitasse spoon 2 pcs. Demitasse spoon 2 pcs.
Demitasse cup and saucer 2 sets Demitasse cup and saucer 2 sets
Dinner Plate (10") 6 pcs. Dinner Plate (10") 6 pcs.
Bread Plate 6 pcs. Bread Plate 6 pcs.
Salad Plates 6 pcs. Salad Plates 6 pcs.
Dessert Bowl 6 pcs. Dessert Bowl 6 pcs.
Entree plate 6 pcs. Entree plate 6 pcs.
Soup bowl 6 pcs. Soup bowl 6 pcs.
Soup spoon 6 pcs. Soup spoon 6 pcs.
Stainless water pitcher 3 pcs. Stainless water pitcher 3 pcs.
Water goblet 6 pcs. Water goblet 6 pcs.
Red wine glass 6 pcs. Red wine glass 6 pcs.
White wine glass 6 pcs. White wine glass 6 pcs.
High ball glass 6 pcs. High ball glass 6 P.CS.
Round table 1 pc.
Rectangular table 1 pc.
Equipment Equipment
3-Compartment Sink 1 unit 3-Compartment Sink 1 unit
Floor Squeegee 1 pc. Floor Squeeqee 1 pc.
Detergents / cleaning agents stock 1 unit Detergents / cleaning agents 1 unit
cabinet stock cabinet
Storage cabinet 1 unit Storage cabinet 1 unit
Bed 1 unit Bed ; 1 unit
Mock Bedroom 1 unit Mock Bedroom 1 unit
Vacuum Cleaner 1 unit Vacuum Cleaner 1 unit
(wet and dry) (wet and dry)
Floor Polishers 1 unit Floor Polishers 1 unit
Dryer 1 unit Drver 1 unit
Washing machine 1 unit Washinq machine 1 unit
First Aid Kit 1 set First Aid Kit 1 set
Fire Extinguisher 1 pc. Fire Extinquisher 1 pc.
Personal Protective Equipment 1 set Personal Protective Equipment 1 set
(PPE) (PPE)
Materials Materials
Hand towels 2 pcs. Hand towels 2 pcs.
Face towels 2 pcs. Face towels 2 PCS.
Hangers 6 pcs. Hangers 6 PCS.
Bath Towels 3 pcs. Bath Towels 3 PCS.
Blanket/ Comforter 1 pc. Blanket / Comforter 1 pc.
Bed Sheets 3 pcs. Bed Sheets 3 pcs.
Pillows / pillow cases 2 pcs. Pillows / pillow cases 2 p'CS.
Foot mat 1 pc. Foot mat •. 1 pc.
Handbook for sanitation Handbook for sanitation 1 pc.
Handbook for safety Handbook for safety 1 pc.
Cleaning Procedures Manual Cleaning Procedures Manual 1 pc.
Utensils 1 set
Table cloths 1 set
Mac food 1 set
MARITIME SECTOR
Qualification : I Ship's Catering Services NC I

Existing Amendment

SHIP'S CATERING SERVICES NC I
The workshop must be of concrete structure. Based on a class size of 24

students/trainees the space requirements for the teaching/learning and circulation
areas are as follows: No Amendments
SPACE AREA IN SQ. I\ TOTAL AREA IN
SIZE IN METERS
REQUIREMENT ETERS SQ. I\ETERS
• Lecture Room (job
site/ schooO 42.00
• Trainee Working 120.00
. Space
Learning Resource
Center 4.00 X 5.00 20.00 20.00
• Facilities/
Equipment/
Circulation Area
Total Workshop Area 236.60

MARITIME SECTOR
Qualification : I Ship's Catering Services NC I

Existing Amendment
• National TVET Trainers Certificate I • Holder of National TVET Trainer

(NTTC I) holder Certificate Level I (NTTC Level I) in Ship's Catering
• With 2 year relevant experience in Hotel Services NC
and Restaurant OR 2 years on board experience • With 2 year relevant experience in
as cook Hotel and Restaurant OR 2 years on board
• *Must be a BS degree holder experience as cook
• *Must be a BS degree holder
METALS AND ENGINEERING SECTOR f
Quarification Existing TEM Amended TEM

Tools Tools
Flux Cored Arc Description Qty Description Qty.
Welding NC Chipping Hammer 25 pcs. Chipping Hammer 25 pcs.
I Steel brush 75 pcs. Steel brush 75 pcs.
Plier/tongs 12 pcs. Plier/tongs 12 pcs.
Files-bastard cut 20 pcs. Files-bastard cut 20 pcs.
Welding Mask 25 pcs. Welding Mask 25 pcs.
Leather apron/jacket 25 sets Leather apron/jacket 25 sets
Leather gloves, long 50 sets Welding gloves(long) 50 sets
Safety goggles, wide vision, clear 5 pcs. Safety goggles, wide vision, clear 5 pcs.
Oxy-acetylene 5 pcs. Oxy-acetylene 5 pcs.
Goqqles Goqqles
Try square 300 mm. long 12 pcs. Try square 300 mm. long 12 pcs.
Steel square 300 mm. long 12 pcs. Steel square 300 mm. long 12 pcs.
Files-half round 12 pcs. Files-half round 12 pcs.
Fillet gauge 5 pcs. Welding gauges 5 pcs.
Wire Cutter 1 pc. Wire Cutter 1 pc.
Hand Hacksaw 1 pc. Hand Hacksaw 1 pc.
Respirator (as per NIOSH) 60 pcs
Safety Shoes (High-cut) 20 prs
Adjustable wrench 12 inch 10 pcs
C- Clamps (8inch) 10 pcs
Clamp Ammeter (Optional) 1 unit
Equipment Equipment
FCAW Welding machine, FCAW gun 12 FCAW machine, 30v, 250-300 Amps. 12 units
and accessories units and accessories
Welding positioners 12 pcs. Welding table with welding positioners 12 pcs.
Portable disc grinder 12 Portable disc grinder 12 units
units
Exhaust fan 1 unit Ventilation System 1 set
Work bench w/ bench vice on 4 corners 2 units Work bench w/ bench vice on 4 2 units
corners
Oxy-acetylene/Oxy-LPG cutting outfit 2 sets Oxy-fuel cutting outfit 2 sets
Pedestal /bench grinding machine 1 unit Pedestal /bench grinding machine 1 unit
Industrial fan 1 unit Industrial fan 1 unit
Fire Extinguishers 4 Units
I Waste Bins 3 units
Scrap Bin 1 Unit
Liquid Penetrant Test (PT) kit 2 sets
Mechanical Press (break/bend test) 1 UnH
Plate and pipe beveling cutting 1 unit
equipment
(Mechanical or Automatic)
Materials Materials
Filler wire E71T-I (or equivalent) 1mm 1 reel Filler wire electrode E71T-I or 5 kgs.
dia. equivalent, 1.0-1.2mmdia.
Mild steel plate 3.2mmX 50mm X 38 pcs. Carbon steel plate 10mm X 150mm X 40 pcs.
150mm 200mm
Mild steel plate 10mm X 100mm X 40 pcs Carbon steel plate 38 pcs.
150mm 6mm X 100mm X 200mm
Cutting disc 3/32" x 5/8" x 4" dia. 27 pcs Cutting disc 3/32" x 5/8" x 4" dia. 27 pcs
Grinding disc 1/4" x 5/8" x 4" dia. 19 pcs. Grinding disc 1/4" x 5/8" x 4" dia. 19 pcs.
Shielding gas (75% argon 25% CO2 5 cyl. Shielding gas (75% argon 25% CO2 5 cyl.
Oxygen 1 cyl. Oxygen 1 cyl.
LPG or Acetylene 1 cyl. LPG or Acetylene 1 cyl.
Dark glass 3 pcs. Dark glass lens 3 pcs.
Lens clear glass 46 pcs. Clear glass lens 46 pcs.
Metal marker 1 tube Softstone I Chalk Marker 2 pcs
II. B- TRAINING FACILITIES (TF)

METALS AND ENGINEERING SECTOR
Qualification : I Flux Cored Arc Welding NC I
Existing Amendment

GAStUAL ARC WELDING -
The welding workshop must be of concrete structure Based onclass si2Eof
NCI 20 students/trainees the space requirements for the teaching/learning and
circulationareas are as follows:
The 1/\elding V10rkshop must be of concrete strocture. Based on class sizeof 25
stud ntsAraineesthe space requirements fortheteachingAearning and circulation areas
are as follo'4',S:
SPACE REQUIREMENT SIZEIN AREAINSQ. QTY. TOTAL AREA IN

METERS METERS SQ.METERS
TEACH GllEARNING SIZE IN AREA IN QTV TOTAL AREA Contextual Learning 3 x4 12 1 12
AREAS IIETERS SQ. INSQ. Area
t.lTERS UERS (LectureRoom)
Distance Learning 56 56
WeldingBooth 2X 1.5 3 5 15 (LaboratoryNVorkshop/
Activity area)
WeldingBoothT 2 X 1.5=3 30 10 30
Grinding Booth* 2 X 1.5 3 2 6 3 x 10 booths
GrindingBooth* 2 X 1.5 3 2 6
Materials/Preparation 2X2 4 4
/lrea1 Materials/Preparat 2 X 2.5 5 2 10
ion Area*
Bench \/\Ork Area* 1.5 X2.5 4 2 8 Bench work AreaT 2 X 2.5 5 2 10
Tool Room &S1M 4X5 20 20 Storage Area (Toolroom 4X5 20 1 20

storage f!.rea1 & SIM storaaearea)
Learning Resource 5X7 35 1 35
Learning Reso11ce 5 X9 45 45 Area"
WashArea /Comfort 2.5 X 4 10 1 10
Area* Room {male & female)
CirculationArea.... (27.3)
Wash f!.tea /Comfort 2.5 X 4 10 10
Room (male & female) 1 Total Workshop Area (160.3-160)
Total 108
Circulation Area** 32
r=-
Total Workshop Aree 140
II. C-AMENDMENT TRAINERS QUALIFICATION (TQ)
Qualification : I Flux Cored Arc Welding NC I
Existing Amendment
• Must be a holder of FCAW NC.I • Holder of National TVET Trainer Certificate Level I
(NTTC Level I) in Flux Cored Arc Welding NC 11 or
• Must have undergone training on Training Methodology I higher
(TM I) • Must be physically fit (including differently-abled
person)
• Must have at least 2 years welding job/industry/
• *Must have at least 2 years job/industry experience teaching experience
• Must be a civil service eligible (for government position

or appropriate professional license issued by the
* Optional. Only when required by the hiring institution

Tools Tools
Flux Cored Arc Chipping Hammer 25 pcs. Chipping Hammer 25 pcs.
Welding NC II Steel brush 75 pcs. Steel brush 75 pcs.
Leather gloves, lonQ 50 sets Welding Qloves(long) 50 sets
Oxy-acetylene Goggles 5 pcs. Oxy-acetylene Goggles 5 pcs.
Respirator (as per NIOSH) 60 pcs.
Safety Shoes (High-cut) 20 prs.
Adjustable wrench 12 inch 10 pcs.
C- Clamps (8inch) 10 pcs.
Equipment Equipment
FCAW Welding machine, Mig gun and 12 units FCAW machine, 30v, 250-300amps 12 units
accessories and accessories
Welding positioners 12 pcs. Welding table with welding 12 pcs.
positioners
Portable disc grinder 12 units Portable disc grinder 12 units
Work bench w/ bench vice on 4 corners 2 units Work bench w/ bench vice on 4 2 units
corners
Oxy-acetylene/Oxy-LPG cutting outfit 2 sets Oxy-fuel cutting outfit with trolley 2 sets
Waste Bins 3 units ·
Scrap Bin 1 Unit
Broom and dustpans 10 sets
Vernier Caliper 5 unit
Spirit Level 5 unit
equipment
Materials Materials
Filler wire E71T-I (or equivalent) 1mm 1 reel Filler wire electrode E71T-I or 5 kgs.
dia. equivalent, 1.0-1.2mm dia.
Carbon steel pipe, schedule 40, 150mm 30 pcs Carbon steel pipe, schedule 40, 30 pcs
dia. X 150mm 150mm dia. X 150mm
Carbon steel pipe, schedule 80, 150mm 18 pcs Carbon steel pipe, schedule 80, 18 pcs
dia. X 150mm 150mm dia. X 150mm
Cutting disc 3/32" X 5/8" X 4" 72 pcs. Cutting disc 3/32" X 5/8" X 4" 72 pcs.
Grinding disc 1/4" X 5/8" X 4" 36 pcs Grinding disc 1/4" X 5/8" X 4" 36 pcs
Shielding gas (75% argon 25% CO2) 5 cyl. Shielding gas (75% argon 25% CO2) 5 cyl.
oxygen 1 cyl. oxygen 1 cyl.
LPG or Acetylene 1 cyl. LPG or Acetylene · 1 cyl.
Dark glass 3 pcs. Dark glass 3 pcs:
Lens clear glass 46 pcs. Clear glass lens 46 pcs
Metal marker 1 tube Softstone I Chalk Marker 2 pcs
II. B - TRAIN'ING FACILITIES (TF)
Qualification : I Flux Cored Arc Welding NC II
Existing Amendment
GAS tlETAL ARC WELDING - NC I

3.5 TRAININGFACIUTIE S
The 'l\elding \J\Orkshop must be of concrete structure. Based on class size of 2: The welding workshop must be of concretestructure. Based on class sii.e of
students/traineesthe space requirements fortheteachingAearning and circulationarea 20 students/trainees the space requirements for the teaching earning and
are as folio : circulation areas are as follows:
SPACE REQUIREMENT SIZE IN AREA INSQ. QlY. TOTAL AREA IN

TEACHINGUARNING SIZE IN AREA IN QTY TOTAL AREA
IN SQ.
AREAS hl:TERS SQ.
hl:TERS tlETERS
Contextual Learning 3 x4 12 1 12
Area
Welding Booth 2 X 1.5 3 5 15 (Lecture Room)
Dis ance Learning 56 56
Grinding Booth• 2 X 1.5 3 2 6 (LaboratoryfVVorkshop/
Activ itv area)
Materials/Preparation 2 X2 4 4 Welding Booth• 2 X 1.5=3 30 10 30
kea• 3 x 10 booths
Grinding Booth" 2 X 1.5 3 2 6
Bench \/\Ork .llrea• 1.5 X 2.5 4 2 8
Materials/Preparct 2 X2.5 5 2 10
ToolRoom&SIM 4X 5 20 20
ion Area"
storagekea•
Bench work Area* 2 X2.5 5 2 10
Learning Resource 5 X9 45 45
kea• Storage Area (Tool room 4X5 20 1 20
&SIM storaae area)
Wash .llrea /Comfort 2.5 X 4 10 10 Learning Resource 5X7 35 1 35
Room (male& female)• Area"
Wash Area /Comfort 2.5 X 4 10 1 10
Total 108 Room (male & femalel
CirculationArea"" (273)
Circulatio.nkea•• 32 Total Workshop Area (160.3~160)
Total Workshop Aree 140

r
11.·c -AMENDMENT TRAINERS QUALIFICATION (TQ)

Qualification : I Flux Cored Arc Welding NC II
Existing Amendment
• Must be a holder of FCAW NC II • Holder of National TVET Trainer Certificate Level I

{NTTC Level I) in Flux Cored Arc Welding NC II or
• Must have undergone training on Training Methodology I higher
{TM I) • Must be physically fit (including differently-abled person)
• Must be physically and mentally fit • Must have at least 2 years welding job/industry/
teaching experience
* Optional. Only when required by the hiring institution
Tools Tools
Flux Cored Arc Chipping Hammer 25 pcs. Chipping Hammer 25 pcs.
Welding NC Ill Steel brush 75 pcs. Steel brush 75 pcs.
Plier/tongs 12 pcs. Stainless / chrome or nickel plated .12 pcs..
Pliers/ tongs
Files-bastard cut 20 pcs. Files-bastard cut . 20 pcs.
Leather gloves, long 50 sets Welding gloves (long) 50 sets
Safety goqqles, wide vision, clear 5 pcs. Safety goqqles, wide vision, clear 5 pcs.
Oxy-acetylene Goqqles 5 pcs. Oxy-acetylene Goqqles 5 pcs.
Try square 300 mm. long 12 pcs. Tri-square 300 mm. Long 20 pcs.
Steel square 300 mm. long 12 pcs. Steel rule300mm. long 20 pcs.
Wire Cutter 1 pc. Stainless / chrome or nickel plated Wire 1 pc.
Cutter
Adjustable wrench 12 inch 10 PCS.
Equipment Equipment
Description Qty. Description Qty. .,
FCAW Welding machine, Mig gun and 12 units FCAW machine, 30v, 250-300amps and ·12
accessories accessories units

Work bench w/ bench vice on 4 2 units Work bench w/ bench vice on 4 corners 2 units
corners
Oxy-acetylene/Oxy-LPG cutting outfit 2 sets Oxy-acetylene/Oxy-LPG cutting outfit 2 sets
Waste Bins 3 units
Scrap Bin 1 Unit
Spirit Level 5 unit
equipment
(Mechanical or Automatic) '•
Materials Materials
Flux cored wire, 1.5 reel Flux cored wire, E308T-1 1.5 reel
E308T-1or
E309T-1or
equivalent
Mild steel plate 3.2mmX 50mm X 24 pcs. ---
150mm
Mild steel plate 10mm X 100mm X 24 pcs. ---
150mm
Carbon steel pipe, schedule 40 30 pcs ---
,150mm dia. X 150mm
Alloy steel plate 10mm x100mm x 4 pcs. Austenitic Stainless plate 10mm x 40 pcs.
150mm (Optional) 150mm x 200mm
Alloy steel pipes sch. 40 dia. 150mm x 2 pcs. Austenitic Stainless pipe, 42 pcs.
150mm 1000mm. x 125mm (sch. 40 )
(Optional)
Cuttingdisc 3/32" X 5/8" X 4" 38 pcs. Stainless Cutting disc 3/32" X 5/8" X 4" 38 pcs.
Grindingdisc 1/4" X 5/8" X 4" 19 pcs Stainless Grinding disc 1/4" X 5/8" X 4" 19 pcs.
Shielding gas (75% argon 25% CO2) 5 cyl. Shielding gas (75%argon 25% CO2) 5 cyl.
LPG or Acetylene 1 cyl. LPG or Acetylene 1 cyl.
Dark glass 3 pcs. Dark glass 3 pcs.
Metal chalk 1 tube Softstone / Chalk Marker 2 pcs
Qualification : Flux Cored Arc Welding NC Ill
Existing Amendment
3.5 TRAINING FACILITIES 3.5 TRAINING FACILITIES

GAS TAL ARC WELDING - NC I
The welding workshop must be of concretestructure. Based on class size of
The \l\elding \I\Orkshop must be of concrete structure. Based on class size of 20 students/trainees the space requirements for the teaching/learning and
25 studentsitraineesthe spacerequirements fortheteachingllearning and circulation circulation areas are as follows:
areas are as follo\116:
SPACE REQUIREMENT SIZE IN AREA INSQ. QTY. TOTAL AREA IN

TEACHINGll.EARHING SIZE IN AREA IN QTY TOTAL AREA METERS METERS SQ. METERS
AREAS !'.EYERS SQ, IN SQ, Contextual Learning 3 x4 12 1 12
TERS TERS
/lrea
Welding Booth 2 X 1.5 3 !i 15 (Lecture Room)
GrindingBooth• 2 X 1.5 3 2 6 (Laboratory/Workshop/
Activity area)
Materials/Preparation 2 X2 4 4
.Area• Welding Booth* 2X 1.5=3 30 10 30
3 x 10 booths
Bench V10rk Area• 1.5 X 2.5 4 2 8 Grinding Booth* 2 X 1.5 3 2 6
Tool Room &SIM 4 X 5 20 20
Storage Area• Materials/Preparct 2 X2.5 5 2 10
ion /lrea*
Learning Resource 5 X9 45 45 Benchwork Area* 2 X2.5 5 2 10
.Area•
Wash Area >'Comfort 2.5 X 4 10 10

Storage Area (Tool room 4X 5 20 1 20
Room (m:;fe & fem:;fe) • &S/M storaae area)
Learning Resource 5X7 35 1 35
Total 108 /lrea*
Wash /lrea /Comfort 2.5 X 4 10 1 10
Room (male & female)
Circulation .Area.. 32 CirculationArea** (273)
Total Wof1<shop Aree 140
Total Workshop Area (160.3-160)
II C -AMENDMENT TRAINERS QUALIFICATION (TQ)

Qualification : I Flux Cored Arc Welding NC Ill
Existing Amendment
• Must be a holder of FCAW NC Ill • Holder of National TVET Trainer Certificate Level I
{NTTC Level I) in Flux Cored Arc Welding NC 111
• Must have completed training in SMAW NC Ill and NC IV • Must be physically fit (including differently-abled
person)
• Must have undergone training on Training Methodology I
{TM I) • Must have at least 2 years welding job/ industry/
teaching experience with at least 16 hours training in
• Must be physically and mentally fit supervisory development course

* Optional. Only wh n required by the hiring institution

Tools Tools
Gas Metal Arc Description Qty Description Qty
Welding (GMAW) Chipping Hammer 25 pcs. Chipping Hammer 25 pcs.
NC I Steel brush 75 pcs. Steel brush 75 pcs.
Leather gloves, long 50 sets Leather gloves, long 50 sets
Fillet gauge 5 pcs. Fillet gauge 5 pcs.
Equipment Equipment
GMAW machine,30v, 250-300 Amps. 12 GMAW machine,30v, 250-300 Amps. 12 units
and accessories units and accessories ' .
Welding positioners 12 pcs. Welding table with welding positioners 1-2 pcs.
units
Work·bench w/ bench vice on 4 corners 2 units Work bench w/ bench vice on 4 2 units
corners
Oxy-acetylene/Oxy-LPG cutting outfit 2 sets Oxy-fuel cutting outfit 2 sets
Pedestal /bench grinding machine 1 unit Pedestal /bench grinding machine 2 units
Industrial fan Industrial fan 2 units
Fire Extinguishers 4 Unifs
Waste Bins 3 units
Scrap Bin 1 Unit
Mechanical Press (break/bend test) 1 Unit
equipment
Materials Materials
Filler wire E71T-l 1.2mm dia. 1 reel Electrodes 0.8-1..2mm dia·. (ER70S-6) 1 reel
Mild steel plate 3.2mm X 50mm X 38 pcs. Carbon steel plate 10mm X 150mm X 38 pcs.
150mm 200mm
Mild steel plate 10mm X 100mm X 40 pcs Carbon steel plate 40 pcs.
150mm 6mm X 100mm X 200mm
CO2 5 cyl. CO2 5 cyl.
LPG / Acetylene 1 cyl. Fuel Gas (Acytelene/LPG) 1 cyl.
Metal marker 1 tube Softstone / Chalk Marker 1 tube

Qualification : Gas Metal Arc Welding (GMAW) NC I
Existing Amendment
GAS IW:TAL ARC WELDING -NC I 3.5 TRAINING FACILITIES

The v>.elding \I\Orl<shop must be of concrete structure. Based on class size of
25 studentsllraineesthespace requirements tor the teachingAearning and circulation The welding workshop must be of concrete structure. Based on class size of
areas are as tollo'l"S: 20 students/trainees the space requirements for the teaching earning and
circulation areas are as follows:
SPACE REQUIREMENT SIZE IN AREA IN SQ. QTY. TOTAL AREA IN

METERS METERS SQ. METERS
TEACHING/1..EARNING SIZE IN AREA IN QTY TOTAL AREA
Area
AREAS IW:TERS SQ. IN SQ. (Lecture Room)
IW:TERS l'wl:TERS Distance Learning 56 56
WeldingBooth 2X 1.5 3 5 16 (Labo ratory,Workshop/
Activity area)
Grinding Booth• 2 X 1.5 3 2 6
WeldingBooth* 2 X 1.5=3 30 10 30
Materials/Preparation 2X2 4 4 3 x 10 booths
.Alea•
Grinding Booth* 2 X 1.5 3 2 6
Bench \/\Ork .Area• 1.5 X 2.5 4 2 8
Tool Room &SIM 4 X 5 20 20

Materials/Preparat 2 X 2.5 5 2 10
storage Area• ionAJea*
Bench work Area* 2 X 2.5 5 2 10
Learning Resource 5X9 45 45
.Alea•
Storage AJea (Tool room 4X5 20 1 20
Wash Area /Comfort 2.5 X 4 10 10 & S/M storaQe area)
Room (male & female) •
Learning Resource 5 X7 35 1 35
Total 108 Arna*
Circulation.Area.. 32 Room (male&female)
Circulation Areatt 7.3)
Total Workshop Area 140
Total Workshop Area (160.3~160)

Qualification : I Gas Metal Arc Welding (GMAW) NC I
Existing Amendment
• Must be a holder of GMAW Welder NC I • Holder of National TVET Trainer Certificate Level I
(NTTC Level I) in Gas Metal Arc Welding (GMAW) NC II
• Must have undergone training on Training Methodology I or higher
(TM I) • Must be physically fit (including differently-abled person)
• Must be physically and mentally fit • Must have at least 2 years welding job/industry/ teaching
experience
Must be a civil service eligible (for government position or
Tools Tools
Gas Metal Arc Chipping Hammer 25 PCS. Chipping Hammer 25 pcs.
Welding (GMAW) Steel brush 75 pcs. Steel brush 75 pcs.
NC II Plier/tongs 12 pcs. Plier/tongs 12 pcs.
WeldinQ Mask 25 pcs. Welding Mask 25 pcs.
Leather Qloves, lonQ 50 sets Leather gloves, long 50 sets
Oxy-acetylene Goggles 5 pcs. Oxy-acetylene Goggles _ 5 pcs.
Try square 300 mm. long 12 pcs. Try square 300 mm. long 12 pcs..
Steel square 300 mm. lonQ 12 PCS. Steel square 300 mm. long 12 pcs.
Files-half round 12 PCS. Files-half round 12 pcs.
Fillet QauQe 5 pcs. Welding gauges 5 pcs.
Equipment Equipment
GMAW/MIG Welding machine, Mig 12 units GMAW machine, 30v, 250-300 Amps. 12 units
gun and accessories and accessories
Welding positioners 12 PCS. Welding table with welding positioners 12 pcs.
exhaust fan 1 unit Ventilation System 1 set
Work bench w/ bench vice on 4 2 units Work bench w/ bench vice on 4 corners 2·units
corners
Oxy-acetylene/Oxy-LPG cutting 2 sets Oxy-fuel cutting outfit with trolley 2 sets
outfit
Pedestal /bench grinding machine 1 unit Pedestal /bench QrindinQ machine 1 unit
Waste Bins 3 units
Scrap Bin 1 Unit
Spirit Level 5 unit
equipment
Materials Materials
Filler wire (solid) 5 reels Electrodes 0.8-1..2mm dia. (ER70S-6) 10 kgs.
Mild steel plate 10mm X 75mm X 38 pcs. Carbon steel plate 10mm x 150mm x 38 pcs.
6m 200mm
Mild steel plate 3.2mm X 75mm X 40 pcs. Carbon steel pipe, 32 pcs.
6m 1500 mm. x 125mm (sch. 40)
Carbon steel pipe, dia. 150 X 3m 2 pcs. ---
schedule 40
Dark lens 3 pcs. Dark glass 3 pcs.
Lens clear glass 46 pcs. Clear glass 46 pcs.
LPG/ Acetylene 1 cyl. Fuel Gas (Acytelene/LPG) 1 cyl.
Metal marker 1 tube Softstone / Chalk Marker 2 pcs.
Qualification : I Gas Metal Arc We!ding (GMAW) NC II
Existing Amendment
-
The welding workshop must be of concrete structure. Based on class size of
G S M:TAL ARC WELDING - HCI 20 students/trainees the space requirements for the teaching/learning and
circulation areas are as fo!lows:
The VIEi ding \J\Ork§hop must be of concrete structure. Based on class sire of 25
s-tudentsitraineesthe space requirements for theteachingAearning and circulation areas
are as folloM: SPACE REQUIREMENT SIZE AREA IN QlY. TOTAL AREA IN
IN SQ. SQ.METERS
TEACHIN-GllEARNING SIZE IN AREA IN QTY TOTAL AREA METERS METERS
AREAS M:TERS SQ. INSQ. Contextual Learning 3x4 12 1 12
M:TERS TERS Area
(Lecture Room)
Welding Booth 2X 1.5 3 5 15
GrindingBooth* 2 X 1.5 3 2 6 (lab oratoryM/o rkshop/
Activity area)
Materialsi?reparation 2X2 4 4
.Area*
Welding Booth* 2 X 1.5=3 II 10 30
3 x 10 booths
Bench \/\Ork f!.rea* 1.5 X2.5 4 2 8 Grinding Booth* 2 X 1.5 3 2 6
Tool Room & SIM 4X5 20 20
storage .Area* Materials/Preparat 2 X 2.5 5 2 10
ion Area*
Learning Resource 5X9 45 45 Bench work Area* 2 X 2.5 5 2 10
f!.rea*
Wash .Area /C9mfort 2.5 X 4 10 10 Storage Area (Tool room 4X5 20 1 20

Room (male & fem le) * & S/M storaae area)
Total 108
Area*
Wash Area/Comfort 2.5 X4 10 1 10
Circulation f!.rea*" 32 Room (ma/e&femalel
Circulation Area** 7.3)
Total Wmkshop Area 140
TotalWorkshop Area (160.3~160)
I. C -AMENDMENT TRAINERS QUALIFICATION (TQ)

Qualification : I Gas Metal Arc Welding (GMAW) NC II
Existing Amendment
• Must be a holder of GMAW Welder NC 11 • Holder of National TVET Trainer Certificate Level I
• Must have undergone training on Training Methodology (NTTC Level I) in Gas Metal Arc Welding (GMAW) NC
11 (TMII) II or higher
• Must be_physically and mentally fit • Must be physically fit (including differently-abled
• *Must have at least 2 years job/industry experience person)
• Must be a civil service eligible (for government position • Must have at least 2 years welding job/industry/
or appropriate professional license issued by the teaching experience
Professional
. Regulatory Commission)
Tools Tools
Gas Metal Arc Chipping Hammer 25 Chipping Hammer 25 pcs.
Welding (GMAW) pcs.
NC Ill Steel brush 75 Steel brush 75 pcs.
pcs.
Plier/tongs 12 Stainless/ chrome or nickel plated Pliers/ 12 pcs.
pcs. tongs
Files-bastard cut 20 Files-bastard cut 20 pcs.
pcs.
Welding Mask 25 Welding Mask 25 pcs.
pcs.
Leather apron/jacket 25 Leather apron/jacket 25 sets
sets
Leather gloves, long 50 Leather gloves, long 50 sets
sets
Oxy-acetylene goggles 5 pcs. Oxy-acetylene goggles 5 pcs.
Try square 300 mm. long 12 Try square 300 mm. long 12 pcs.
pcs.
Steel square 300 mm. long 12 Steel square 300 mm. long 12 pcs.
pcs.
Files-half round 12 Files-half round 12 pcs.
pcs.
Wire Cutter 1 pc. Stainless/ chrome or nickel plated Wire 1 pc.
Cutter
Spirit Level 5 unit
Equipment Equipment
GMAW/Mig Welding machine, Mig 12 GMAW machine, 30v, 250-300 Amps. 12 units
gun and accessories units and accessories
Welding positioners 12 Welding table with welding positioners 12 pcs.
pcs.
units
corners
Oxy-acetylene/Oxy-LPG cutting outfit 2 sets Oxy-acetylene/Oxy-LPG cutting outfit 2 sets
Plasma cutting machine with complete 2 sets
accessories
Waste Bins 3 units
Scrap Bin 1 Unit
Liquid Penetrant Test (PT) kit 2 ets
Plate and pipe beveling cutting equipment 1 unit
Materials Materials
Description Qty, Description Qty,
Mig wire, ER309 1 reel Electrodes 0.8-1..2mm dia. (ER308L) 2 kgs.
Mild steel plate 3.2mm X 50mm X 38 ---
150mm pcs.
Mild steel plate 10mm X 100mm X 40 pcs Austenitic Stainless plate 10mm x 150mm 40 pcs.
150mm x 200mm
6" dia. Sch. 40 A-53 Gr. B 21 Austenitic Stainless pipe, 42 pcs.
prs 1000mm. x 125mm (sch. 40)
(or
equiv
jts)
Cutting disc 3/32" x 5/8" x 4" dia. 38 Stainless Cutting disc 3/32" X 5/8" X 4" 38 pcs.
pcs.
Grinding disc 1/4" x 5/8" x 4" dia. 19 Stainless Grinding disc 1/4" X 5/8" X 4" 19 pcs.
pcs.
oxygen 1 cyl. oxygen 1 cyl. '
LPG / Acetylene 1 cyl. LPG / Acetylene 1 cyl.
Dark glass 3 pcs. Dark glass lens 3 pcs
Lens clear glass 46 Clear glass lens 46 pcs.
pcs.
Metal chalk 10 Softstone / Chalk Marker 10 pcs.
pcs.
Qualification : I Gas Metal Arc Welding (GMAW) NC Ill
Existing Amendment
-
The welding workshop must be of concrete structure. Based on class size of
GAS TAL ARC WELDING -NCI 20 students/trainees the space requirements for the teaching/learning and
circulation areas are as fo!lows:
The Vlelding wirkshop must be of concrete structure. Based on class sizeof
2! studentsilraineesthe space requirements fortheteachingAearning and circulation
are!f are as follows: SPACE REQUIREMENT SIZE IN AREA IN SQ. QlY. TOTAL AREA IN
TEACHINGil.EARN ING SIZE IN AREA IN QTY TOTAL AREA Area
AREAS TERS SQ. IN SQ. (Lecture Room)
TERS WTERS
Welding Booth 2X 1.5 3 5 15 (Labo ratory/1/1/o rkshop/
Activity area)
Grinding Booth• 2 X 1.5 3 2 6 Welding Booth• 2 X 1.5=3 30 10 30
Materials/Preparation 2 X2 4 4 3 x 10 booths
.Atea• Grinding Booth" 2 X 1.5 3 2 6
Bench'I\Ork kea• 1.5 X2.5 4 2 8 Materials/Preparat 2 X 2.5 5 2 10
Tool Room &SIM 4X 5 20 20 ion Area"
Storage kea• Bench work Area" 2 X 2.5 5 2 10
Learning Resource 5 X9 45 45 Storage Area (Tool room 4X5 20 1 20
kea•
& SIM storaae area)
Wash kea .Comfort 2.5 X 4 10 10 Learning Resource 5X7 35 1 35
Room (male & female) • Area"
Wash Area/Comfort 2.5 X 4 10 1 10
Total 108
Room (male & female)
Circulation Area"" r,l.7.3)
Circulationkea" 32
Total Workshop Area (160.3~160)
Total Workshpp Area 140
.II.C -AMENDMENT TRAINERS QUALIFICATION (TQ)

Qualification : I Gas Metal Arc Welding (GMAW) NC Ill
Existing Amendment
• Must be a holder of GMAW NC Ill • Holder of National TVET Trainer Certificate Level I
• Mu t have completed training in SMAW NC Ill (NTTC Level I) in Gas Metal Arc Welding (GMAW) NC Ill
• Must have undergone training on Training Methodology Ill • Must be physically fit (including differently-abled person)
{TM Ill) • Must have at least 2 years welding job/ industry/
• Must be physically and mentally fit teaching experience with at least 16 hours training in
• *Must have at least 2 years job/industry experience supervisory development course
• Must be a civil service eligible (for government position or
appropriate professional license issued by the
Tools Tools
Gas Tungsten Arc Chipping Hammer 25 pcs. Chipping Hammer 25 pcs·.
Welding (GTAW) Steel brush 50 pcs. Steel brush 50 pcs.
NC II Plier/tongs 12 pcs. Plier/tongs 12 pcs.
Leather gloves, long 25 sets Welding gloves(long) 25 sets
Oxy-acetylene goggles 5 pcs Oxy-acetylene goggles 5 pcs
Hand Hacksaw 5 pcs. Hand Hacksaw 5 pcs.
Equipment Equipment
GTAW Welding machine and 12 units GTAW machine AC/DC 250- 12 units
accessories* 300amps and accessories
Welding positioners 12 pcs. Welding table with welding 12 pcs.
positioners
Work bench w/ bench vice on 4 corners 2 units Work bench w/ bench vice on 4 2 Ulilits
corners
Oxy-fuel cutting outfit with trolley 2 sets
Waste Bins 3 u·nits
Scrap Bin 1 Unit
Spirit Level 5 unit
equipment
Materials Materials
Filler wire, 1.6 or 2.4mm dia. 250 kls. Filler Rod, ER?0S-6, 1.6-2.4mm 250 kls.
dia. x 1000mm
Mild steel flat bar 3.2mm x 50mm x 6m 25pcs. Carbon steel plate 3mm x 150mm x 25pcs.
200mm
Mild steel flat bar 6mm x 50mm x 6m 25pcs. Carbon steel plate 6mm x 150mm x 25pcs.
200mm
Carbon steel pipe, 50mm dia. x 6m, 25 pcs. Carbon steel pipe, 25 pcs.
schedule 40 1500 mm. x 125mm (sch. 40)
ArQon Qas 5 cyl. Arqon gas 5 cyl.
Dark Qlass 1 pc. Dark glass #12 1 pc.
Lens clear Qlass 14 pcs. Clear glass 14 pcs.
CuttinQ disc 3/32,,x 5/8,,x 4udia. 10pcs Cuttinq disc 3/32,,x 5/8" x 4udia. 10pcs
GrindinQ disc 1/4,,x 5/8" x 4" dia. 20 pcs. Grindinq disc 1/4,,x 5/8" x 4" dia. 20 pcs.
Tungsten Electrode 2.4 mm 10pcs. Tungsten Electrode, EWTh-2, 2.4 10pcs.
mm dia.

Qualification : I Gas Tungsten Arc Welding (GTAW) NC II
Existing Amendment
3,!i TRAINING FACILITIES
GTAWNCII 3.5 TRAINING FACILITIES
The V1eldingV10rkshopmust beofconcrete structure. Based on class sizeof25
students/traineesthe spacerequirements fortheteachingAearningand circulation The welding workshop must be of concretestructure. Based onclass sizeof
areas are as follo\1\6: 20 students/trainees the space requirements for the teaching/learning ard
circulation areas are as follows:
TEACHING /LE ARNING SIZE IN AREA IN QTY TOTAL AREA

AREAS M:TERS SQ. IN SQ.
SPACE REQUIREMENT SIZE IN AREA IN SQ. QTY. TOTAL AREA IN
METTRS METERS SQ. METERS
M:TERS M:TERS
Welding {looth 2X 1.!i 3 !i 15 Area
(Lecture Room)
GrindingBooth• 2 X 1.5 3 2 6 Distance Learning 56 56
(Laborato ryfWo rkshop/
Materials/Preparation 2 X2 4 4 Activity area)
/lrea• Welding Booth.. 2X1.5=3 30 10 30
Bench VIO rk Area• 1.5 X 2.5 4 2 8 3 x 10 booths
Grinding Booth" 2 X 1.5 3 2 6
TooIRoom8SIM 4X 5 20 20
storage/lrea• Materials/Preparat 2 X 2.5 5 2 10
ionArea"
LearningResource 5X9 45 45 Bench work Area" 2 X 2.5 5 2 10
/lrea•
Storage Area (Tool room 4X5 20 1 20
Wash Area /Comfort 2.5 X4 10 10 & SIM storaaearea)
Room (male & female) • Leaming Resource 5 X7 35 1 35
Total 108 Area"
"Thisa,ea c1111 aso be used by otlterweldillg co11,.u. Wash Area /Comfort 2.5 X 4 10 1 10
Circulation /lreau
""A,ea ,eq11ite111e11t 32
is eqllwalMtto 30% ofthetotalteacltillg/ll!amillg mas- Room (male & female)
CirculationArea= (27.3)
Total Workshop Ame 140
METALS AND.ENGINEERING SECTOR
Qualification : I Gas Tungsten Arc Welding (GTAW) NC II
·Existing Amendment
• Must be a holder of GTAW Welder NC 11 • Holder of National TVET Trainer Certificate Level I
• Must have undergone training on Training Methodology II (NTTC Level I) in Gas Tungsten Arc Welding (GTAW)
(TM II) NC 11 or higher
• Must be physically and mentally fit • Must be physically fit (including differently-abled person)
• *Must have at least 2 years job/industry experience • Must have at least 2 years welding job/industry/ teaching
• Must be a civil service eligible (for government position experience
Tools Tools
Gas Tungsten Arc Chipping Hammer 25 pcs. Stainless Chipping Hammer 25 pcs.
Welding (GTAW) Steel brush 50 pcs. Stainless Steel brush 50 pcs.
NCIV Plier/tongs 12 pcs. Stainless / chrome or nickel plated Pliers/ 12 pcs.
tongs
Leather gloves, long 25 sets Welding gloves (long) 25 sets
Safety go rnles, wide vision, clear 5 pcs. Safety goqqles, wide vision, clear 5 pcs.
Oxy-acetylene goggles 5 pcs Safety Goggles 5 pcs
Trysquare 300 mm. long 12 pcs. Try square 300 mm. long 12 pcs.
Hand Hacksaw 5 pcs. Hand Hacksaw 5 pcs.
Spirit Level 5 unit
Equipment Equipment
GTAW Welding machine and 12 units GTAW machtne AC/DC 250-300 Amps. 12 units
accessories* and accessories
corners .
I Industrial fan 1 unit Industrial fan 1 unit
Plasma cutting machine with complete 2 sets
accessories
Waste Bins 3 units
Scrap Bin 1 Unit
Plate and pipebeveling cutting 1·unit
equipment
(Mechanical or Automatic}
Materials Materials
Description Qty. Descriptio{l Qty.
Filler rod, 5 kls. Filler rod, ER308L 1.6-2.4 dia. x 1000mm 5 kls.
ER308 or 309 1.6 or 2.4mm dia.
Mild steel fiat bar 3.2mm x 50mm x 24 pcs. Austenitic Stainless plate 3mm x 50mm x 24 pcs.
150mm 150mm
Mild steel fiat bar 6mm x 100mm x 24 pcs. Austenitic Stainless plate 6mm x 100mm 24 pcs.
150mm x 150mm
Carbon steel pipe, 20 pcs. Austenitic Stainless pipe, _ 20 pc .
50mm dia. x 150mm, schedule 40 50mm dia. x 150mm, schedule 40
Argon gas 5 cyl. Argon gas 5 cyl.
Dark glass 1 pc. Dark glass lens 1 pc.
Cutting disc 3/32 x 5/8 x 4 dia. 15 pcs Stainless Cutting disc 3/32 X 5/8 X 4 15 pcs.
11 11 11 11 11 11
Grinding disc 1/4" x 5/8" x 4" dia. 15 pcs. Stainless Grinding disc 1/4" X 5/8" X 4" 15 pcs
Tungsten Electrode 2.4 mm 1Opes. Tungsten Electrode, EWTh-2, 2.4 mm 10pcs.
dia.
Qualification : I Gas Tungsten Arc Welding (GTAW) NC IV
Existing Amendment
3.!i TRAINING FACILITIES 3.5 TRAINING FACILITIES

GTAWNCII
The weldingworkshopmust be of concretestructure. Basedon classsizeof
TheVlelding V10rkshopmustbe of concretestructure. Basedonclasssizeof25 20 students/trainees the space requirements for the teaching/learning and
studentsAraineesthespacerequirementsfortheteachingAearningandcirculation circulationareasareasfollows:
areasareasfoi10V1S:
SPACE REQUIREMENT SIZEIN AREA INSQ. QTY. TOTAL AREA IN

TEACHINGUARNING SIZE IN AREA IN QTV TOTALAREA METERS METERS SQ. METERS
AREAS M:TERS SQ. IN SQ.
M:TERS M:TERS Contextual Learning 3x4 12 1 12
Area
Welding Booth 2 X 1.5 3 5 15 (LectureRoom)
DistanceLearning 56 56
GrindingBooth' 2 X 1.5 3 2 6 (LaborateryNl/orkshop/
Materials/Preparation 2 X2 4 4 Activitvarea)
Area• WeldingBooth* 2 X 1.5=3 30 10 30
3 x 10 booths
BenchV10rkArea• 1.5 X 2.5 4 2 8 GrindingBooth* 2 X 1.5 3 2 6
ToolRoom&SIM 4X 5 20 20
StorageArea• Materials/Preparat 2 X 2.5 5 2 10
ion Area*
LearningResource 5 X9 45 45 BenchworkArea* 2 X 2.5 5 2 10
Area*
WashArea /Comfort 2.5 X 4 10 10

StorageArea (Toolroom 4X5 20 1 20
& S/M storaae area)
Room(male& female) •
Total 108 Area*
Wash Area/Comfort 2.5 X 4 10 ,1 10
Circulation.Areau 32 Room (male&female)
Total Woricshop Area 140
CirculationArea** (27.3)
This a,ea can allo be uHd by otlrerweldillgcou,stt. Total Workshop Area (160.3~160)
Area requirement is equivalent to 30%of tlte totalteacltillgl/eanrillg areas

Qualification : I Gas Tungsten Arc Welding (GTAW) NC IV
Existing Amendment
• Must be a holder of GTAWNC IV • Holder of National TVET Trainer Certificate Level I

• Must have undergone training on Training Methodology (NTTC Level I) in Gas Tungsten Arc Welding (GTAW)
IV (TMIV) NC IV
• Must be physically and mentally fit • Must be physically fit (including differently-abled
*Must have at least 2 years job/industry experience person)
•
• Must be a civil service eligible (for government position • Must have at least 2 years welding job/ industry/
or appropriate professional litense issued by the teaching experience with at least 24 hours training in
Professional Regulatory Commission) Supervisory Course
Tools Tools
Gas Welding NC Description Qty Description Qty
I Chipping Hammer 25 pcs. Chipping Hammer 25 pcs.
Steel brush 75 pcs. Steel brush 75 pcs.
Welding goqqles (swivel) 5 pcs. Welding goqqles (swivel) 5 pcs.
Safety goqqles, wide vision, clear 5 pcs. Safety goqqles, wide vision, clear 5 pcs.
Files-half round 1 pc. Files-half round 1 pc.
Fillet gauge 1 pc. Welding gauges .1pc.
"Hand Hacksaw 1 pc. Hand Hacksaw 1 pc.
Equipment Equipment
GAS Welding/cutting outfit * 12 units Oxy-fuel Welding/cutting outfit 12 units
Work bench w/ bench vice on 4 2 units Work bench w/ bench vice on 4 2 units
corners corners
LPG/ acetylene 1 cyl. LPG / acetylene 1 cyl.
Pedestal /bench grinding machine 2 units
Waste Bins 3 units
Scrap Bin :
1 Unit
t Liquid Penetrant Test (PT) kit 2 sets
Plate and pipe beveling cutting . 1 unit
equipment
(Mechanical or Aut0matic)
Materials Materials
Filler rod 2.4mm dia. 3 kgs Filler rod, RG-50, 2.4mm dia. 3 kgs
Filler wire m.s. 1.6 dia. 1 kg Filler rod, RG-50, 1.6 dia. 1 kg
Mild steel sheet 3.2mm X 150mm x 12 pcs. Carbon steel plate 3.2mm X 150mm x 12 pcs.
200mm 200mm
Mild steel sheet 2.4mm X 150mm X 6 pcs. Carbon steel plate 2.4mm X 150mm X 6 pcs.
200mm 200mm
Carbon steel pipe, schedule 40 75 5 pcs. Carbon steel pipe, schedule 40 75 dia. 5 pcs.
dia. X 150mm X 150mm
Cut off disc 3/32" x 5/8" x4" dia. 20 pcs Cut off disc 3/32" x 5/8" x4" dia. 20 pcs
Metal marker 1 tube Softstone / Chalk Marker 2 pcs

Qualification : I Gas Welding NC I
Existing Amendment
TEACHING/lEARNING SIZE IN AREA IN QTY TOTAL AREA The welding workshop must be of concre e structure. Based on class gze
AREAS TERS SQ, IN SQ. of 20 studen s/trainees the space requirements for the leaching/learning
TERS METERS and circulation areas are as follows:
WeldingBooth 2X 1.5 3 5 15
Grinding Bootht 2 X 1.5 3 2 6 SPACE REQUIREMENT SIZE IN AREA IN SQ. QTY. TOTAL AREA
METERS METERS IN SQ.
Materials/Prepa-ation 2X2 4 METERS
Net Contextual Leaming 3 x4 12 1 12
Area
Benchwork Aret 1.5X 2.5 4 2 8 (Lecture Room)
Distance Learning ffi 56
Tool Room & SIM 4X5 20 20 (Laboratory/Workshop/
Activity area)
storage ea*
- WeldingBooth* 2 X 1.5=3 30 10 30
3 x 10 booths
earning Resour 5X9 45 45 - Grinding Bootht 2 X 1.5 3 2 6
e Area'
- Materials/Prepara t 2 X2.5 5 2 10
WashArea/Comfort 2.5X4 10 10 ion Area*
oom (maf & femaw - Bench work Areat 2 X2.5 5 2 10
Storage Area ool room 4X5 20 1 20

Toa 108 &S/M storaaearea)
Circu·lonAlea** 32 Area*
Wash Area /Comfort 2.5X 4 10 1 10
Total Wor1(shop Area 140 Room (male&fema )
Circulation Area** 7.3)
Total Workshop Area (16O.3N16O)

II. C AMENDMENT TRAINERS QUALIFICATION (TQ)
Qualification : I
Gas Welding NC I
Existing Amendment
• Must be a holder of GAS WELDING NC I • Holder of National TVET Trainer Certificate Level I
• Must have undergone training on Training Methodology I (TM (NTTC Level I) in Gas Welding NC 11
I) • Must be physically fit (including differently-abled
• Must be physically and mentally fit person)
• *Must have at least 2 years job/industry experience • Must have at least 2 years welding job/industry/
• Must be a civil service eligible (for government position or teaching experience
11. A- LIST OF TOOLS, EQUIPMENT AND MATERIALS
Tools Tools
Gas Welding) NC II Chipping Hammer 25 pcs. Stainless Chipping Hammer 25 pcs.
Steel brush 75 pcs. Stainless Steel brush 75 pcs.
Plier/tongs 12 pcs. Stainless / chrome or nickel plated Pliers/ 12 pcs.
tongs
Welding goggles (swivel) 5 pcs. Welding goooles (swivel) 5 pcs.
Oxy-acetylene Goggles 5 pcs. Oxy-acetylene Goooles 5 pcs.
Files-half round 1 pc. Files-half round 1 pc.
Fillet gauge 1 pc. Welding gauges 1 pc.
Wire Cutter 1 pc. Stainless/ chrome or nickel plated Wire 1 pc.
Cutter
Adjustable wrench 12 inch ·10 pcs.
C- Clamps (8inch) : 10 pcs.
Clamp Ammeter (Optional) · 1 unit
Equipment Equipment
GAS Welding/cutting outfit * 12 units Oxy-fuel Welding/cutting outfit 12
units
Portable disc grinder 12 units Portable disc grinder 12
units
corners
LPG / acetylene 1 cyl. Oxy-fuel cutting outfit with trolley 2 sets
Waste Bins · 3 units
Scrap Bin 1 Unit
Liquid Penetrant Test (PT) kit • 2 sets
Vernier Caliper 5 1:1nit
Spirit Level 5 unit
equipment
Materials Materials
Description Qty. Description Qty
Filler (alloy) rod 1.6/2.4 5 kgs Filler rod (alloy steel), 1.6 or 2.4 mm dia. 5 kgs
mmdia.
Mild steel sheet 3.2mm X 150mm x 12 pcs. Alloy steel plate 3.2mmX 150mm x 12 pcs.
200mm (equiv to 200mm (equiv
20 jts) to 20
jts)
Mild steel sheet 2.4mm X 150mm X 12 pcs. Alloy steel plate 2.4mm X 150mm X 12 pcs.
200mm (equiv 200mm (equiv
to 20 to 20
jts) jts)
Carbon steel pipe, schedule 40 75 22 pcs. Alloy steel pipe, schedule 40 75 mm dia. 22 pcs.
mm dia. X 150mm (equiv to X 150mm (equiv
45 jts) to 45
its)
Dark glass 3 pcs. Dark glass #8 3 pcs.
Lens clear glass 46 pcs. Clear glass 25 pcs.
Cut off disc 3/32" x 5/8" x4" dia. 38 pcs Cut off disc 3/32" x 5/8" x4" dia. 38 pcs
II. B - TRAINING·FACILITIES (TF)
Qualification : I Gas Welding NC II
Existing Amendment

The welding workshop must be of concrete structure. Based on class SJai of
GAS WELDING -NCII
20 students/trainees the space requirements for the teaching/learning and
The welding workshop must be of concrete structure. Based on class size of 25 circulation areas are as follows:
s1udents/1raineesthe space requirements for the teaching/learning and circulation
areas are as follows:
TEACHING/LEARNING SIZE IN AREA IN QlY TOTAL AREA

AREAS METERS SQ. IN SQ.
METERS METERS
Welding Booth 2X 1.5 3 5 15
Grinding Booth* 2 X 1.5 3 2 6
Materials/Preparation 2 X2 4 4
Area*
Bench work Area* 1.5 X 2.5 4 2 8

Tool Room&S/M 4 X 5 20 20
Storage Area""
Leaming Resource 5 X9 45 45
Area*
Wash Area /Comfort 2.5 X 4 10 10

Room (male & female)""
Total 108
Circulation Area** 32

SPACE REQUIREMENT SIZE IN AREA IN SQ. QTY. TOTALAREA IN
METALS AND ENGINEERING
t/lETERS SECTOR SQ.METERS
METERS
Qualification
Contextual Learning : 3 x4 I Gas12Welding)1 NC II 12
Area
(lectureRoom)
Distance Learning
Existing
56 56
Amendment
(Laboratory/Workshop/
Activity area)
• Must
Weldingbe a holder
Booth*
3 x 10 of
10 II
2 X 1.5=3GAS WELDING
booths
30 30 • Holder of National TVET Trainer Certificate Level I
• Must have undergone training on Training Methodology
Grinding Booth* 2 X 1.5 3 2 6 11 (NTTC Level I) in Gas Welding NC 11
{TMMaterials/Preparat
II) • Must be physically fit (including differently-abled
•
2 X 2.5 5 2 10
ion Area*
Must
Bench be
work physically
Area* and
2 X 2.5 mentally
5 fit 2 10
person)
•Storage*Must have at least
Area (Toolroom 4 X 5 2 years20job/industry
1 experience
20 • Must have at least 2 years welding job/industry/
•Leaming
& SIM storaae area)
Must be a civil service eligible teaching experience
Resource 5X7 35 (for government
1 35 position or
appropriate professional license
Area.. issued by the Professional
Regulatory
Room Commission)
(male&female)
CirculationAiea** (27.3)

Tools Tools
Submerged Arc Description Qty Description Qty
Welding (SAW) NC I Chipping Hammer 25 pcs. Chipping Hammer 25 pcs.
Steel brush 75 pcs. Steel brush 75 pcs.
Flash shield 25 pcs. Flash shield 25 pcs.
Working clothes/ overall 25 sets Working clothes/ overall 25 sets
Leather gloves, long 50 sets Leather gloves, long 50 sets
Plier/tongs 20 prs.
Safety goggles, wide vision, clear 20 prs.
Steel rule300mm. long 20 pcs.
Equipment Equipment
SAW machine AC/DC and 12 units SAW machine AC/DCand accessories 12
accessories units
Welding positioners 12 pcs. Welding table with welding positioners 10pcs.
Automatic gas cutting machine 1 unit Automatic gas cutting machine 1 unit
Flux oven 1 unit Flux oven 1 unit
Portable disc grinder 12 units Portable disc grinder 12
units
corners
Industrial fan 2 units
Oxy-fuel cutting outfit 2 sets
Waste Bins 3 units
Scrap Bin 1 Unit
equipment
Materials Materials
Mild steel plate 10mm X 150mm X 10 pcs. Carbon steel plate 10mm X 150mm X 10 pcs.
500mm 500mm
Mild steel plate 12 mm X 150mm X 20 pcs. Carbon steel plate 12mm X 100mm X 20 pcs.
500mm 500mm
Metal marker 1 tube Softstone I Chalk Marker .. 2 pcs
Filler wire 2.4 / 3.2 mm dia. EL8, 1 reel Filler wire 2.4 / 3.2 mm dia. EL8, EM12, 1 reel
EM12, or EH14 or EH14
F6AO or F7AO 1 bag F6AO or F7AO 1 bag
3.2mm0 electrode for tacking 1 kg 3.2mm0 electrode for tacking (E6OXX/ 1 kg
(E6OXX/E7OXX) E7OXX)
Dark glass lens 3 pcs
Clear glass lens 25 pcs

METALS AND ENGINEERINGSECTOR
Qualification : I Submerged Arc Welding (SAW) NC I
Existing Amendment
J. IBAlli!&iFACILITIES
Space Size in Area in Uty. Total
SUBMERGED ARC'M:LDING-NCI Area in
Requirement Meters Sq.M.
The welding-workshopmustbeof concretestructure. Basedon class size of25 Sq. M.
students/traineesthespace requirementsfor theteachingAearning and circulation Weldin Area 2x3 6 5 30
areas areas follows:
Materials/ 2x2 4 5 20
Preparation
Area
Bencwh 1.5X 2.5 3.75 2 7.5
ork Area
SPACE SIZE IN AREA IN TOTAL AREA
REQUIREMENT METERS SQ.M QlY. INSQ.M Tool Room& 4x5 20 20
S/MStorage
Welding Area 2X2 4 5 20 Area
Materials/Preparation 2 X2 4 4 Learning 5x9 45 45
Area* Resource
Bench workArea 1.5 X 2.5 4 2 8 Area
WashArea/ 2.5 X 4 10 10
ToolRoom&SIM 4X5 20 20
StorageArea Confort
Room
Learning Resource 5 X9 45 45
Area* Total 132.5
Circulation 35
WashArea/Comfort 2.5 X 4 10 10 Area
Room (maleand
female) ... Total 167.5
Total 107 Workshop
Area
CirculationArea....
. -·. ... ... 35
. r

Qualification : I Submerged Arc Welding (SAW) NC I
Existing Amendment
• Must be a holder of SAW NC I • Holder of National TVET Trainer Certificate Level I

• Must have undergone training on Training Methodology I (NTTC Level I) in Submerged Arc Welding NC 11
(TM I) • Must be physically fit (including differently-abled
• Must be computer literate person)
• ust be physically and mentally fit • Must have at least 2 years welding job/industry/
• *Must have at least 2 years job/industry experience teaching experience
• Must be c1 civil service eligible (for government position or
. appropriate professional license issued by the
II A- LIST OF TOOLS I EQUIPMENT AND MATERIALS
Tools Tools
Description Qty. Description Qty,
Submerged Arc Chipping Hammer 25 pcs. Chipping Hammer 25 pcs.
Welding (SAW) NC II Steel brush 75 pcs. Steel brush 75 pcs.
Flash shield 25 pcs. Flash shield 25 pcs.
Working clothes/ overall 25 sets Working clothes/ overall 25 sets
Leather qloves, long 50 sets Leather gloves, long 50 sets
Fillet gauge 5 pcs. Weldinq qauqes 5 PCS.
Pliers/tongs 20 prs.
Safety qoqqles, wide vision, clear 20 prs.
Steel rule300mm. long 20 pcs.
Safety Shoes (Hiqh-cut) 20 prs.
Equipment EQuipment
SAW machine AC/DC and 12 units SAW machine AC/DC and accessories 12 units
accessories
Welding positioners 12 pcs. Welding table with welding positioners 12 pcs..
Automatic gas cutting machine 1 unit Oxy-fuel cutting outfit with trolley 1 unit
Flux oven 1 unit Flux oven 1 unit
Industrial fan 2·units
Work bench w/ bench vice on 4 2 units Work bench w/ bench vice on 4 2 untts
corners corners
Turning rolls 5 pcs. Turninq rolls 5 pcs.
Manipulators 5 pcs. Manipulators 5 pcs.
Pedestal /bench grindinq machine 2 units
Waste Bins 3 units
Scrap Bin 1 Unit
Liquid _enetrant Test (PT) kit 2 sets
P
Spirit Level 5 unit
equipment
Materials Materials
CS pipe 6"0, 12mm thk (minimum 16 pcs. CS pipe 6"0, 12mm thk (minimum 16 pcs.
0/thk) X 150~200mm. (equiv 0/thk) X 150~200mm. (equiv
to 30 to 30
jts) jts)
Metal marker 1 tube Softstone I Chalk Marker 2 pcs.
Filler wire 2.4/3.2 mm dia. EL8, 12 kg Filler wire 2.4/3.2 mm dia. EL8, 12 kg
EL12 or equiv. EL12 or equiv.
Flux F7AO (1:2 ratio, filler/flux) 1 bag Flux F7AO (1:2 ratio, filler/flux) 1 bag
Lens clear glass 6 pcs Clear glass 6 pcs
Dark glass 1 pcs Dark glass 1 pcs
Cutting disc 3/32" X 5/8" X 4" 12 pcs. Cutting disc 3/32" X 5/8" X 4" 12 pcs.
Grindingdisc 1/4" X 5/8" X 4" 6pcs Grinding disc 1/4" X 5/8" X 4" 6pcs

Qualification : I Submerged Arc Welding (SAW) NC II
Existing Amendment
SUBMERGED ARC WELDING- NC II

Space Size in Area in Qty. Total
The welding workshop must be of concrete structure. Based on class size of 25 Requirement Meters Sq. M. Area in
studentS/trainees the space requirements for the teaching/learning and cIrculatIon Sq.M.
areas are as follows.
Weldin Area 2x3 6 5 30
Materials/ 2x2 4 5 20
SPACE SIZE IN AREA IN SQ. TOTAL AREA Preparation
REQUIREMENT METERS M QTY. INSQ. M
Area
Welding Area 2X 2 4 5 20
Bench work 1.5 x2.5 3.75 2 7.5
Area
Materlals/Prepa-ation 2 X2 4 4 Tool Room & 4x5 20 20
Area"
S/M Storage
Bench worK Area 1.5 X 2.5 4 2 B Area
Learning 5x9 45 45
Tool Room & S/M 4 X 5 20 20
Storage Area Resource
Area
Leaning Resource 5 X9 45 45 Wash Area/ 2.5 X 4 10 10
Area"
Confort
Wash Area /Comfort 2.5 X4 10 10 Room
Room (male and Total 132.5
female)"
Circulation 35
Tuldl 107 Area
Total 167.5
Circulation Area"" 35
Workshop
Total Workshop Area 142 Area
Qualification : l
Submerged Arc Welding (SAW) NC II
Existing Amendment
• Must be a holder of SAW 11 • Holder of National TVET Trainer Certificate Level I

• . Must have undergone training on Training (NTTC Level I) in Submerged Arc Welding NC 11
Methodology 11 (TM 11) • Must be physically fit (including differently-abled
• Must be computer literate person)
• Must be physically and mentally fit • Must have at least 2 years welding job/industry/
• *Must have at least 2 years job/industry teaching experience
experience
position or appropriate professional license issued by the
PROCESSED FOOD AND BEVERAGES (PFB)
Slaughtering Tools Tools
Operations Description Qty. Description Qty.
(Large Animal) Working knife (8"-10" long, 2" 15 p Working knife (8"-10" long, 2" 15 pc
NC II width) width)
Sticking knife (8" long, 1.5" 2 pc Sticking knife (8" long, 1.5" 2 pc
width) width)
Flaying knife, (curved, 7"-8" 15 pc Flaying knife, (curved, 7"-8" 15 pc
long, 1.5"-2" width) lonQ, 1.5"-2" width)
Scabbard (either double or 15 pc Scabbard (either double or 15 pc
single depending on the length single depending on the length
of the knife) and belt, plastic of the knife) and belt, plastic
Sharpening steel (round bar with 15 pc Honing rod/Honing steel 15 pc
magnet, 12"-14" long) (round bar with magnet, 12"-
14" long)
Sharpening stone (combination 15 pc Whetstone (combination of 15 pc
of coarse and fine side - 12" coarse and fine side 6-8" long,
long, 25" width) 2-4" width)
Working knife (8"-10" long, 2" 15 pc Working knife (8"-10" long, 2" 15 pc
width) width)
Equipment Equipment
Restraining box/pen (2-2.5 m 1 unit Restraining box/pen (2-2.5 m 1 unit
long, 30" width) long, 30" width)
Stunner (pneumatic or cartridge 1 unit Stunner (pneumatic or 1 unit
type) cartridge type)
Hoist (1-1.5 ton) 1 unit Hoist (1-1.5 ton) 1 unit
Blood trough (1 meter long, 20" 1 unit Blood trough (1 meter long, 1 unit
in height, with hole diameter of 20" in height, with hole
1.5-2" depend on workplace diameter of 1.5-2" depend on
requirements) workplace requirements)
Overhead rails (14 feet in 1 unit Overhead rails (14 feet in 1 unit
height) height)
Spreaders (pneumatic operated 1 unit Spreaders (pneumatic 1 unit
spreaders attached on rail operated spreaders attached
on rail
Cradle (made of stainless pipe, 1 unit Cradle (made of stainless 1 unit
3 meter.long, 30" width) pipe, 3 meter long, 30" width)
Brisket saw (pneumatic, circular 1 unit Brisket saw (pneumatic, 1 unit
saw blade, 5" in diameter) circular saw blade, 5" in
diameter)
Meat hook and trolley (roller - 5" 15 pc Meat hook and trolley (roller - 15 pc
diameter hook - 18 ") 5 " diameter hook - 18 ")
Splitting axe/saw (pneumatic, 1 unit Splitting saw (pneumatic, 1 unit
circular saw blade, 16" in dia., circular saw blade, 16" in dia.,
motor - I HP) motor- I HP)
Paunch truck (pushcart in form 4 1 pc Paunch truck (pushcart in form 1 pc
feet x 3 feet depend 4 feet x 3 feet depend on
on workplace workplace requirements
requirements
Viscera truck (pushcart in form 4 2 pc 2 pc ·.
Viscera truck (pushcart in form
x
. feet 3 feet depend on 4 feet x 3 feet depend on
workplace requirements workplace requirements
Inspection table (30" width, 1-2 2 pc Inspection table (30" width, 1-2 2 pc
meter long) meter long)
Pressurized water spray (0.5-1 2 pc Pressurized water spray (0.5-1 2 pc
HP motor) HP motor)
Sterilizer/handwash (box 4 unit Sterilizer/handwash (box 4 unit
stainless with heater, temp. 70- stainless with heater, temp.
100 degrees Celcius) 70-100 degrees Celcius)
Condemnation receptacle 1 unit Condemnation receptacle 1 unit
(stainless/ plastic drum) (stainless/ plastic drum)
Weighing scale (digital, ranging 1 unit Weighing scale (digital, 1 unit
from 500 kgs. capacity) ranging from 500 kgs.
capacity)
Tool dips/basin (sanitizers or 6 unit Tool dips/basin (sanitizers or 6 unit
sterilizers) sterilizers)
Hand Dips (Pail, 1 foot in height) 6 unit Hand Dips (Pail, 1 foot in 6 unit
height)
Cattle 75 Cattle 50 pc
(2heads/trnee)
Materials Materials
Description Qty Descriptio Qty
Stunning cartridge 1 box Stunning cartridge 1 box
(50 (50 pcs.)
pcs.)
Plastic pail 2 pc Plastic pail 2 pc
Abaca I Plastic twine 1 roll Abaca I Plastic twine 1 roll
Hard hat 15 unit Hard hat 15 unit
Ear plugs/muffs 15 unit Ear plugs/muffs 15 unit
Apron (water-prooD 15 unit Apron (water-prooD 15 unit
Goqqles 15 unit Goggles 15 unit
Rubber boots 15 unit Rubber boots 15 unit
Uniform (long pants and shirt or 15 unit Uniform (long pants and shirt 15 unit
cover-all) or cover-all)
Qualification : Slaughtering Operations (Large Animal) NC II
Existing Amendment
3.5 RAI ING FACILITIES 3.5 TRAIING FACILITIES
R ired ng fa ities for tra· ng instr.uti t I o er Slaughte ired fa ities fOf tra·ing instrtut
Opera'ons (L ge Ani ) C IIbased on a das.5 inta e d15 studen inees. Opera (LargeAnimal) C IIbased on a dass in e
SPACE REQUIREMENT
AREA IN TOTAL AREA IN AREAi TOTAL AREA IN
SQ..ETERS SQ. ETERS SPACE REQUIREMENT
SQ.METERS SQ.METERS
30 30
room 30 30
3
3
30 30
30 30
6 6
6 6
6 6
6 6
6 6
6 6
121 121 121

TOTAL AREA 121
Note:
• Class "AA" slaughterhouse will be required
as a minimum requirement for training. This has
facilities and operational procedures sufficiently
adequate that the livestock slaughtered therein are
suitable for sale in any market domestic.
• Class "AAA" slaughterhouse will be required as
a minimum requirement for training. This has
facilities and operational procedures sufficiently
adequate that the livestock slaughtered therein are
suitable for sale in any market international.

Qualification:· I Slaughtering Operations (Large Animal) NC II
Existing Amendment
• Must be a holder of National TVET Trainer's Certificate
Level I either in:
0 Slaughtering Operations (Large Animals) NC II
0 Slaughtering Operations (Swine) NC II No Amendment
• Must have at least 2 years relevant industry experience
and teaching experience
• Must have attended relevant training and seminars
II. A · LISTOF TOOLS, EQUIPMENT AND MATERIALS
PROCESSEDFOOD AND BEVERAGES (PFB)
Slaughtering Tools Tools
Operations Description Qty. Description Qty.
(Swine) NC II Working knife (8"-1O" long, 2" 15 pc Working knife (8"-1O" long, 2" 15 pc
width) width)
Sticking knife (8" long, 1.5" width) 2 pc Sticking knife (8" long, 1.5" 2 pc
width)
Flaying knife, (curved, 7"-8" long, 15 pc Flaying knife, (curved, 7"-8" 15 pc
1.5"-2" width) long, 1.5"-2" width)
Scabbard (either double or single 15 pc Scabbard (either double or 15 pc
depending on the length of the single depending on the length
knife) and belt, plastic of the knife) and belt, plastic
Sharpening steel (round bar with 15 pc Honing rod/Honing steel 15 pc
magnet, 12"-14" long) (round bar with magnet, 12"-
14" long)
Bell scrapers 15 pc
Whetstone (combination of 15 pc
coarse and fine side 6-8" long,
2-4" width)
Equipment Equipment
Restraining box/pen (1.5 m long, 1 unit Restraining box/pen (1.5 m 1 unit
24" width) long, 24" width)
Stunner (Electric or cartridge 1 unit Stunner (Electric or cartridge 1 unit
.. powered) powered)
Hoist (1-1.5 ton) 1 unit Hoist (1-1.5 ton) 1 unit
Blood trough (1 meter long, 20" in 1 unit Blood trough (1 meter long, 20" 1 unit
height, with hole diameter of 1.5- in height, with hole diameter of
2" depend on workplace 1.5-2" depend on workplace
requirements) requirements)
Overh_ead rails (8-10 feet in 1 unit Overhead rails (8-10 feet in 1 unit
height) height)
Gambrel/Spreader (hanger in 15 pc Gambrel/Spreader (hanger in 15 pc
form, 24" long) form, 24" long)
Breastbone saw (pneumatic, 1 unit Breastbone saw (pneumatic, 1 unit
circular saw blade, 5" in diameter) circular saw blade, 5" in
diameter)
Splitting axe/saw (pneumatic, 1 unit Splitting axe/saw (pneumatic, 1 unit
circular saw blade, 16" in dia., circular saw blade, 16" in dia.,
motor - I HP) motor - I HP)
Viscera truck (pushcart in form 4 1 pc Viscera truck (pushcart in form 1 pc
feet x 3 feet depend on workplace 4 feet x 3 feet depend on
requirements workplace requirements
Inspection table (24" width, 1-2 2 pc Inspection table (24" width, 1-2 2 pc
meter long) meter long)
... Pressurized water spray (0.5-1 1 set Pressurized water spray (0.5-1 1 set
HP .tor) HP motor)
mo
Sterilizer/handwash (box 4 unit Sterilizer/handwash (box 4 unit
stainless with heater, temp. 70- stainless with heater, temp. 70-
100 degrees Celcius) 100 deQrees Celcius)
Condemnation receptacle 1 unit Condemnation receptacle 1 unit
(stainless/ plastic drum) (stainless/ plastic drum)
Weighing scale (digital, ranging 1 unit Weighing scale (digital, 1 unit
from 500 kgs. capacity) ranging from 500 kgs.
capacity)
Hand Dips (Pail, 1 foot in height) 6 units Hand Dips (Pail, 1 foot in
6 units
height) .
Dehairing machine or dehairing 1 unit Dehairing machine or 1 unit
table (depending on workplace dehairing table (depending on
requirements) workplace requirements)
Scalding tank (depending on 1 unit Scalding tank (depending on 1 unit
workplace requirements Minimum workplace requirements
of 3 heads and maximum of 6 Minimum of 3 heads and
heads) maximum of 6 heads)
Working table or platform (2 1 unit Working table or platform (2 1 unit
meters long; 1.5 meters width meters long; 1.5 meters width
depending on the size of the depending on the size of the
swine) swine)
Tool dips/ basin (sanitizers or 6 units Tool dips/ basin (sanitizers or 6 units
sterilizers) sterilizers)
Singeing equipment (flame or 1 unit Singeing equipment (flame or 1 unit
torch) torch)
Meat hook and trolley (roller - 5 " 15 pc Meat hook and trolley (roller - 5 15 pc
diameter hook - 18 ") " diameter hook - 18 ")
Swine 75 Swine 50 pc
(2head s/trainee)
Materials Materials
Plastic pail 2 pc Plastic pail 2 pc
Abaca I Plastic twine 1 roll Abaca I Plastic twine 1 roll
Stunning cartridge 1 box Stunning cartridge 1 box
(50 pc) (50 pc)
Hard hat 15 units Hard hat 15 units
Ear plugs/muffs 15 units Ear plugs/muffs 15 units
Apron (water-proof) 15 units Apron (water-prooD 15 units
Goggles 15 units Goggles 15 units
Rubber boots 15 units Rubber boots 15 units
Uniform (long pants and shirt or 15 sets Uniform (long pants and shirt 15 sets
cover-all) or cover-all)
Qualification :Slaughtering Operations (Swine) NC II
Existing
Amendment
3.SRAI ING FACILITIES 3.5 TRAI ING FACILITIES
R ired traninga ities f0< tra ·nginstrtutilhatI o er SlaughteR ired tra_ingfa ities f0< training instiMio thatI o r Slau
Opera'ons (La-ge·) II ba ona dass intae 15 studen ainees.Oper·a ons (LargeAnimal) C II based on a dass intak
AREAi TOTAL AREA IN AREA IN TOTAL AREA IN
SPACE REQUIREMENT SQ. ETERS SQ.METERS SPACE REQUIREMENT SQ.METERS SQ. ETERS
room 30 30 30 30
3 43 3 43
30 30 30 30
6 6 6 6
6 6 6 6
6 6 6 6
121 121 121 121

TOTAL AREA
Note:
Class "AA" slaughterhouse will be required as a minimum
Class "AAA" slaughterhouse will be required as a minim

Qualification: I Slaughtering Operations (Swine) NC 11
Existing Amendment
• Must be a holder of National TVET Trainer's Certificate
Level I either in:
0 Slaughtering Operations (Large Animals) NC II
0 Slaughtering Operations (Swine) NC II No Amendment
• Must have at least 2 years relevant industry experience
anq teaching experience
·.
• .. Must have attended relevant training and seminars .
11. A- LIST OF TOOLS, EQUIPMENT AND MATERIALS
SOCIAL AND OTHER COMMUNITY DEVELOPMENT SECTOR
Tools Tools
Domestic Work NC Description Qty Description Qty
Brooms 10 Broom (walis tambo/ soft broom) 10 pcs
II
Dust Pans and Brushes 10 Dust pan 10 pcs
Brush 10 pcs
Cleaning Implements 10 delete
Water Hoses 5 Water hoses, 5 meters, 2 pcs
expandable, fiexible
Buckets 5 Bucket, plastic or stainless, small 5 pcs
Bucket, plastic or stainless, 5 pcs
medium
Bucket, plastic or stainless, large 5 pcs
Lint Free Cleaning Cloths 10 Lint free microfiber cleaning cloth _2 0p c
s
Squeegees 5 Squeegees, with 10 pcs
} plastic/aluminum handle-and
foam, 8"
Scrubbing Foam 10 Scrubbing foam, double-sided 10 pcs
Dish Pans 10 Dish pan, stainless steel or 5 pcs
plastic, medium
Dish pan, stainless steel or 5 pcs
plastic, large
Dish Sponges 10 Dish sponges, double-faced 10 pcs
scouring pads-dish washing
scrub
Rubber Spatulas 5 Silicone spatula, non-stick 5 pcs
Floor Mops 5 Floor mop, spin mop stainless 5 sets
steel with wringer bucket
Sponge foam rubber mop 5 pcs
Spray Bottles 5 Spray bottle, plastic 10 pcs
Anti-Static Dusters 5 Anti-static wool brush duster, 5 pcs
30cm
Cobwebbers 5 Microfiber duster for cleaning 10 pcs
with extension pole, 100cm
Cleaning Rags 10 Cleaning rag, 12" x 18". 20 PGS
Dust Mops 5 Dust Mops 5 pcs
Gloves 5 Gloves, rubber latex 10 pcs
Aprons 5 Apron, adjustable, half-length, 25 pcs
adult size
Equipment Equipment
Vacuum Cleaner 1 Vacuum cleaner, 2.0 L capacity, 2 units
2000 watts maximum power,
hepa filter,
(2-in-1 wet/dry)
Vacuum cleaner, 2.0 L capacity, 2 units
2000 watts maximum power,
hepa filter (standard)
Toilet Caddies 2 Toilet caddies, stainless or 5 units
plastic
"A" Frame Ladders 2 "A" Frame ladders, with multi- 2 units
functional tool slots, alluminum,
extra heavy load bearing
capacity up to 136 kg.
Food Processor 1 Food processor with drizzle 1 unit
basin, stainless steel blade; 220
Grills 2 Electric griller, 230V/2000W, 2 units
adjustable temperature control
High Pressure Steamer 1 Induction pressure cooker with 2 units
steamer, 24cm, stainless
Microwave Oven 1 Micro wave oven, 20L 1 unit
Oven (Elect./Gas) 1 Oven with rotisserie, 35L, 1 unit
(electric and gas)
Refrigerator 1 Refrigerator, 2-door 1 unit
9.0 cubic ft. volume capacity
Tilting Skillets 2 delete
Toaster 1 Toaster, 7L capacity 1 unit
Electric Knife 1 Electric Knife 1 pc
Blender/Juice Maker 1 Blender/Juice maker with 450W, 1 unit
1.25L
Rice Cooker 1 Rice cooker, 1L, 5 cups capacity 1 unit
Dish Washers 1 Dish washer with UV, 35L 1 unit
capacity
Driers 1 delete
Irons 2 Flat iron, 1.2kg 5 units

Steam iron 5 units
Ironing Boards 2 Ironing board, standard size 5 units
Can opener (manual) 1 pc
Steam Pressers 1 Steam presser, 220-240V, 1 unit
hanging
Utensils & Plates/Serving Pieces 3 sets Utensils & Plates/Serving Pieces 3 sets
Pans 2 Pans, 2-layer non-stick coating 1 pc
(medium)
Pans, 2-layer non-stick coating . 1 pc
(large)
Beds 2 Bed withmatress, single 1 pc
Bed withmatress, double 1 pc
Broiler 1 unit Broiler 1 unit
Coffee Maker 1 unit Coffee Maker 1 unit
Can opener (manual) 1 pc
Electric Opener 1 pc Electric Opener 1 pc
Garbage Disposal 3 units Trash can with swing cover, 50L, 1 unit
plastic, blue
Trash can with swing cover, SOL, 1 unit
plastic, green
Trash can with swing cover, 50L, 1 unit

plastic, yellow
plastic, red
plastic, black
Portable Heater 1 Portable heater, 2500W 220V, 1 unit
stainless steel
Portable heater, 2500W 220V, 1 unit
plastic
Range (Elect./Gas) 1 unit Range (Elect./Gas) 1 unit
Stove (Elect/Gas) 1 Induction Cooker 3 units
Tilting Skillet 1 delete
Washing Machine 1 Washing Machine with drier, 1 unit
automatic, 7kg.
.. Weighing Scale 1 Weighing scale, digital, 10kg/1g 1 unit
Bulletin Board 1 pc Bulletin Board 1 pc
Armed Chairs 25 Armed chair, plastic 25 pcs
Directional Signage 2 Directional signage set 10 sets
Emergency Lights 5 Emergency light, LED, 5 units
rechargeable
Fire Extinguishers 3 Fire extinguisher, portable, dry 1 unit
chemical, 5Ibs
Fire extinguisher, portable, dry 1 unit
chemical, 10lbs
Fire extinguisher, portable, dry 1 unit
chemical, 20Ibs
Office Tables 3 Office table (standard size) 3 units
Instructor's Desks 3 lnstructor s desk (standard size) 2 units
1
Conference Table 1 Conference table (6-seater) 1 unit

Computer Table 1 Computer table (standard size) 2 units
Telephones 3 Telephone (landline) 1 unit
Telephone (extension) 2 units
Wall Clocks 2 Wall Clocks 3 pcs
·.
,.
Steel Cabinets w/ Locks 3 Steel Cabinets w/ Locks 1 unit
First Aid Cabinet 1 First Aid cabinet with first aid 2 sets
contents
Computer Units 2 Desktop/Laptop, 2 units
- hard drive Capacity: 500 GB
- RAM Size: 8GB
- Screen Size: 15"
- Processor Speed: 3-4Ghz
- Processor Core Type: Quad-
core
- Memory: 8 GB
Operating System: Windows 10
Typewriter 1 delete
Electric Fans 3 Electric fan, stand fan 3 units
Air Con Units 2 Air Conditioner, window type, 3 units
1HP (1-office, 2-demo/class
room)
Overhead Projector 1 LCD Projector 1 unit
Projector Screen 1 Projector Screen, 50 Inch 4:3 1 unit
pull up and pull down
Camera (Still or Video) 1 Digital camera 1 unit
Multimedia Equipment 1 Multimedia equipment, - TV, 1 set
Microphone, Speakers,
Multimedia player
Sound System 1 unit Sound System 1 unit
Materials Materials
Cleaning Detergents 5 Cleaning detergent, 1kg 10
packs
Liquid Detergents 5 Liquid detergent, 1L 10 btls
Cleaning Solutions 5 Cleaning solution for metal 5 pcs
Cleaning Solution for leather 5 pcs
Cleaning solution for wood 5 pcs
Cleaners 5 delete
Toilet Disinfectants 5 All Purpose Cleaner, 1L 5 pcs
Toilet Bowl Swabs 5 pcs Toilet Bowl Swabs 5 pcs
Drop Sheets 5 Drop Sheet, large pre tape 5 pcs
masking film, 1 Roll
Sanitizing Agents 5 Sanitizing Agents, 400 grams 5 pcs
Wax Paper/Aluminum Foils 2 pcs Wax Paper/Aluminum Foils 2 pcs
Air Fresheners 5 pcs Air Fresheners 5 pcs
Napkins 2 pcs Napkins 2 pcs
Tablecloths/Linen 5 Tablecloths/Linen, 70in., white or 5 pcs
any color
Serving Cloths 5 Serving cloths, cotton, white 5 pcs
Tea Towels 5 pcs Tea Towels 5 pcs
Clothing 5 Clothing, cotton, white and 5 pcs/
assorted colors type
(Type: Tshirt, ¾ blouses, dress
for men and women, maong
pants, slacks, socks, underwear,
baby/newborn clothes, toddler
clothes)
Cleaning Cloths 5 Cleaning cloth (dining table) 5 pcs
Cleaning cloth (kitchen) 5 pcs
Cleaning cloth (toilet) 5 pcs
Cleaning cloth (living room) 5 pcs
All-Purpose Detergents 5 btls. All-Purpose Detergents, SL 5 btls
Coffee, Tea, Cream 1 pk. Coffee 1 pack
Tea 1 pack
Cream 1 pack
Condiments 1 IT DEPENDS ON THE MAIN As
DISH, APPETIZER, DESSERT needed
AND SOUP based on the
Competency assessment tools
but gerenerally this condiments
contains of salts, sugar,
soysauce and vinegar
Disinfectants 5 pcs Disinfectants 5 pcs
Drain Solvents 5 Drain Solvents, 100g 5 pcs
Garbage Bags 5 Garbage bag, small 5 packs
Garbage bag, medium 5 packs
Garbage bag, large 5 packs
Scouring Pads 5 pcs Scouring Pads 5 pcs
Cooking Oils 3 Cooking oil, 1L 3 btls
Ingredients 1 IT DEPENDS ON THE MAIN As
DISH, APPETIZER, DESSERT needed ,
AND SOUP based on the
I
Competency assessment tools
Soiled/Defective Clothes 1 Soiled/Defective clothes, cotton, 1
white and assorted colors pc/
(Type: Tshirt, ¾ blouses, dress type
for men and women, maong
pants, slacks, socks, underwear,
baby/newborn clothes, toddler
clothes)
Linen 5 Bed linen set, cotton) 2 pillow 5 sets
cases and 1 fitted sheet for
single bed
Bed linen set, cotton, 2 pillow 5 sets
cases and 1 fitted sheet
for
double bed
Fabric 5 Flat sheet, cotton, standard size 5 pcs
for single bed
Clothesline 5 pcs Clothesline 5 pcs
Clothes Pins 20 pcs Clothes Pins 20 pcs
Clothespin Bags 5 Clothespin bags, portable, 5 pcs
foldable
Clothes Racks 5 Clothes Racks, double pole, 3 pcs
stainless steel'
Sorting Baskets/Shelves 5 pcs Sorting Baskets/Shelves 5 pcs
Hangers 20 pcs Hangers 20 pcs
Stain Removing Agents 5 Stain Removing Agents, 1L 5 btls
Fabric Softeners 5 Fabric Softeners, 800ml 5 btls
Chlorine Bleach 5 Chlorine Bleach, 1L 5 btls
Laundry Bags 5 Laundry bags, large, foldable, 5 pcs
nylon
Laundry Baskets 5 Laundry baskets with cover 5 pcs
Food Items (Meat, Vegetable, 1 IT DEPENDS ON THE MAIN As
Seafood, Poultry & Game, Stock, DISH, APPETIZER, DESSERT needed
Cold Food, Cereals, Flour, Butter AND SOUP based on the
Sauces, Fruits) Competency assessment tools
China Ware 3 China Ware, 10", white 3 pcs
Glassware 3 Goblet, 9" 3 pcs
Silverware 3 Silverware set (serving spoon, 3 sets
spoon & fork)
Cutlery 3 Cutlery Stainless Steel, 4pcs/set 3 sets
Wine/Spirits Asrt. Wine/Spirits Asrt.
Chair (Dining) 1 set Dining table set (table and 6pcs 1 set
Table (Dining) 1 chair)
Ashtrays 3 pcs Ashtrays 3 pcs
Toothpicks 2 btls. Toothpicks 2 btls.
Juice 5 btls. Juice, Flavors: Pineapple, Grape 5 btls/
and Apple flavor
Bond Papers 2 Bond Paper 2 reams/
sizes: Letter, Legal, A4 size
Calendars 2 pcs Calendars 2 pcs
Folders 25 Folder, 25 pcs/
sizes: Letter, Legal, A4 size
Logbook 1 Logbook, 100 pages 1 pc
Pencils 10 pcs Pencils 10 pcs
Marking Pens 5 pcs Marking Pens 5 pcs
White Boards 2 pcs White Boards 2 pcs
Whiteboard Markers 3 pcs Whiteboard Markers 3 pcs
Whiteboard Erasers 2 pcs Whiteboard Erasers 2 pcs
Transparency Acetate 1bx delete
Ballpens 5 Ballpen, Color: Blue, Black and 5 boxes
Red /color
Training Materials Training Materials
Mobilizing Action for the Mobiliz_ing Action for the 1 pc
Protection of Domestic Workers Protection of Domestic Workers
from Forced Labour and from Forced Labour and
Trafficking in South-East Asia: Trafficking in South-East Asia:
The Philippine Component The Philippine Component (can
bee-books)
Establishing Professionalism in Establishing Professionalism in 1 pc
the Workplace the Workplace
CBLM Handouts/ Popsheets CBLM Handouts/ Popsheets 25 pcs
Textbooks on Home Textbooks on Home 1 copy/
Management Management book
1. Basic Home Management 1. Basic Home Management
Manual Manual
2. Managing Household 2. Managing Household
3. Home Management 3. Home Management
Supervisory Supervisory
4. Home Management 4. Home Management
5. Household 5. Household
6. Self Defense 6. Self Defense
7. First Aid 7. First Aid
8. Training Manual for Home 8. Training Manual for Home
Management Management
ELECTIVE (Amendment: Retain the existing TEM for all COCs, hence no Amendments in all
Elective Competencies)

Qualification: I DOMESTIC WORK NC II
Existing Amendment
3.5 lRAINING FACILITIES
Based on a class intake or 25 students/trainees
Area in Sq. Total Area in Sq.

Space Requirement Size In Meters Meters Meters
Building (permanent) 104 sq_m_
StudenVTrainee Working Space 1 X 1m 1 SQ m 25 SQ m
Lecture/Demo Room
Leaming Resource Center
8x5m_
3x Sm
40 SQ. m.
15sq m
40 sq_m_
15sq_m_
No Amendments
Facilities/EquipmenU Circulation 6x4 m_ 24 SQ. m_ 24 sq_m_
Area
II. C -AMENDMENT TRAINER'S QUALIFICATION (TQ)

Qualification: I DOMESTIC WORK NC II
Existing Amendment
■
Must be a holder of NTTC Level I in Domestic ■
Must be a holder of NTTC Level I in Domestic
Work NC II Work NC II
■
Mu t be able to communicate in English and ■
Must be able to communicate in English and -.
Filipinoivernacular Filipino/vernacular
■
Must have at least two (2) years job/industry ■
Must have at least two (2) year
experience* job/industry experience
*Optional
..., .
A
Tools Tools
Bookkeeping NC Ill Description Qty Description Qty
Stapler 1 pc. Stapler 1 pc.
Calculators 25 pcs Calculators 25 pcs
Equipment Equipment
Computer/Laptop 1 unit Computer/Laptop 1 unit
Aircon unit 1 unit Aircon unit 1 unit
Teacher's Table/Chair 1 unit Teacher's Table/Chair 1 unit
Arm Chairs 25 pcs. Armed Chairs 25 pcs
White Board 1 pc. White Board or Document reader 1 pc.
Materials Materials
Pencils 25 pcs. Pencil 25 pcs.
Pencil Erasers 25 pcs. Pencil Eraser 25 pcs.
Ballpens 25 pcs. Ballpen 25 pcs.
Ruler 25 pcs. Ruler 25 pcs.
Journals (assorted columns) 25 pcs. Journal (assorted columns) 25 pcs.
Ledger 25 pcs. Ledger 25 pcs.
Worksheets (assorted) 25 pcs. Worksheets (assorted) 50 pcs.
Acetate 1 box Marker 3 pcs.
Marker 3 pcs. Envelope (Long) 25 pcs.
Diskettes/CD Registration Form 25 pcs.
Envelopes (Long) 25 pcs. Teacher's Record Book 1 pc.
Registration Forms 25 pcs. Ledger Book 25 pcs.
Teacher's Record Book 1 pc. Staple Wire 1 box
Worksheets (Asstd.) 50 pcs Flash drive 1 pc
Marker Ink 1 pc.
Ledger Book 25 pcs.
Staple Wire 1 box
Qualification: BOOKKEEPING NC Ill
Existing Amendment
3.5 FAC UTIEs•
8aselll on a dass intak-a f 25 s'tuden: s; ai ees
Sire ........
. . . . . ..
A r e a l n Tollll Area In Sq.
Meters
No Amendments
uectuTe:OelllG R00m
x-im.
'8.x5m.
.
S q.
4:0 .m.
25s .m
40 .
Leaming Resource
Center 3 x 5 m. 5 . m. 15s.
'Fae ities..-'Equq:i,rr.rent'
Oir<llilation Area S -4-m. 24
Note:
,., The C01r.Se may held or conducted in otets and similarly situated
locaticM.s.
• TIie course may be conducted on-llne or internet-based trai ·ng.
II. C - AMENDMENT TRAINER'S QUALIFICATION (TQ)

Qualification: I BOOKKEEPING NC Ill
Existing Amendment
The trainer must: ■
Must be a holder of National TVET Trainer
■
be a holder of Bookkeeping NC Ill or a Certificate (NTTC) Level I in Bookkeeping NC Ill
Certified Public Accountant ■
Must be a holder of Bookkeeping NC 111 or a
■
a graduate of B.S. Accounting or its equivalent Certified Public Accountant
■
have completed Training Methodology Ill or its ■
Must be a graduate of any one (1) of the following
equivalent degrees in Bachelor of Science in Accountancy;
■
be able to communicate effectively both orally Bachelor of Science in Management Accounting;
and in written form Bachelor of Science in Accounting Information
■
have at least three (3) years experience in the System; or Bachelor of Science in Internal
industry as a bookkeeper Audit
■
possess good moral character ■
Must be able to communicate effectively both
orally and in written form
■
Must have at least three (3) years experience in
the industry as a bookkeeper
■
Must possess good moral character
1.A - LIST OF TOOLS, EQUIPMENT AND MATERIALS
TOURISM SECTOR
Qualification Existing TEM Amendments
Attraction & Tools Tools
Theme Parks Description Qty Description Qty
Operation NC II Rescue kit (toolbox) 2 sets Rescue kit (toolbox) 2 sets
Equipment Equipment
Computer with internet 1 set Computer with internet 1 set
connection connection
LCD projector 1 unit LCD projector 1 unit
Two-way radio 2 units Two-way radio 2 units
Mobile phone 2 units Mobile phone 2 units
Telephone 1 unit Telephone 1 unit
Fax machine 1 unit
Digital camera 1 unit Digital Camera with Video 1 unit
function
Video camera 1 unit
Microphone 1 unit Microphone 1 unit
Sound system 1 unit Sound system 1 unit
Megaphone 1 unit Megaphone 1 unit
Photocopier 1 unit Photocopier 1 unit
Personal protective equipment 2 sets
and clothing
Fire extinguisher 1 unit
Cleaning equipment 1 set
Materials Materials
Telephone Directory 1 set Telephone Directory 1 set
Cleaning materials 1 set
General InformationSheet 25
sheets
1.8 - TRAINING FACILITIES (TF)
TOURISM SECTOR
Qualification : ATTRACTION & THEME PARKS OPERATION NC II
Existing Amendment
35 GFACILITIES
Based n a lass· take o .25 stude1rrtsltrainees.

-.Jl..-------------r---------.---------------------------------------------------,
SpacreReQJl.liretnent Size in Meters Area in Sq. Total Area in Sq.

Meters Meters
25sq. m
sq.m. 4 sq. m.
15 sq. m. No Amendment
2 sq.m,
Total workshop area; 104sq. m.
1 C - TRAINERS' QUALIFICATION (TQ)

TOURISM SECTOR
Qualification: I ATTRACTION & THEME PARKS OPERATION NC II
Existing Amendment
• Must have completed a Trainer' Training • Must be a holder of National TVET Trainers Certificate
Methodology Course (TM II) or its equivalent Level I in Attraction & Theme Parks Operation NC II
• Must be physically and mentally fit • Must be physically and mentally fit, of good moral
• Must have at least 3-5 years character, with pleasing personality
job/industry experience • Must have at least 3-5 years job/industryexperience in
• Must be a holder of Attractions and Theme Parks a themed park or natural attraction
Operations NC Level II Certificate or equivalent
qualification
• Must be of good moral character
• With pleasing personality
• Must have attended relevant training and
seminars
2.A - LIST OF TOOLSI EQUIPMENT AND MATERIALS
TOURISM SECTOR
Barista NC II Tools Tools
Hand tampers 2 Hand tampers 2 pcs
Bar spoons 3 Bar spoons 3 pcs
Tamping pads 2 Tamping pads 2 pcs
Espresso cleaning tools 1 set Espresso cleaning tools 1 set
(brushes) (brushes)
Cleaning chemical 1 Cleaning chemical 1
pack/bot
Screw drivers 1 set Screw drivers 1 set
Thermometers w/ clip 2 Thermometers w/ clip 2 pcs
Shot glasses 12 Shot glasses 12 pcs
Demitasse cups with saucers 12 Demitasse cups with saucers 12 sets
Cappuccino cups with saucers 12 Cappuccino cups with saucers 12 sets
Latte cups with saucers 12 Latte cups with saucers 12 sets
20 oz steaming pitcher 6 20 oz steaming pitcher 6 pcs
32 oz steaming pitcher 4 32 oz steaming pitcher 4 pcs
10 or 12 oz steaming pitcher 2 10 or 12 oz steaming pitcher 2 pcs
Demitasse teaspoons 1 doz Demitasse teaspoons 1 doz
Teaspoons 1 doz Teaspoons 1 doz
Water goblets 6 Water goblets 6 pcs
Collins or Pilsner 12 Collins or Pilsner 12 pcs
Irish glass 6 Irishglass 6 pcs
Gooseneck Kettle 1 pc
Equipment Equipment
2 - Group (semi-automatic 1 2 - Group (semi-automatic 1 unit
commercial type espresso commercial type espresso
machine machine
OR OR
Single or 1-group semi-automatic 2 Single or 1-group semi-automatic 2 units
commercial type espresso commercial type espresso
machine machine
Refrigerator or cooler for 1
milk/cream
Doser grinder (commercial type) 1 Doser grinder (commercial type) 1 unit
Chiller/refrigerator 1 Chiller/Refrigerator 1 unit
French Press 2 French Press 2 units

Syphon 2 Syphon 2 units
Pourover/V60 Hand drip 3 Pourover/V60 Hand drip 3 units
Moka poUstove top espresso 1 Moka poUstove top espresso 1 unit
maker maker
Automatic drip coffee maker 1 Automatic drip coffee maker 1 unit
Table top stove; camping stove 1 Table top stove or Camping 1 set
stove or Portable stove with
Butane
Commercial blender with extra 1 Commercial blender with extra 1 unit
pitcher pitcher
Knock box 2 Knock box 2 pcs.
Hand stopwatches 3 Hand stopwatches 3 pcs.
3 in 1 Cocktail Shaker 2 3 in 1 Cocktail Shaker 2 pcs.
Materials Materials
Coffee beans (Fresh roasted 25 kilos Coffee beans (Fresh roasted 25 kilos
whole) whole)
Fresh milk 30 Fresh milk 5 liters
cases
Liquid cream 1 case Liquid cream 2 liters
Assorted Flavored syrups with 2 Assorted Flavored syrups with 2 bottles
pumps bottles pumps
Assorted Fruit purees/sauces 1 jar Assorted Fruit purees/sauces 1 jar
with pumps each with pumps each
Stirrers 1 pack Stirrers 1 pack
Straws 1 pack Straws 1 pack
Lint free rags (3 colors) 30 pcs Lint free rags (3 colors) 30 pcs
Whipped cream dispenser with 2 Whipped cream dispenser with 2 pcs.
nozzle nozzle
Whipped cream charger 2 boxes Whipped cream charger 2 boxes
Paper filter 1 pack Paper filter 1 pack
Blind filter 1 Blind filter 1 pack
Round bar trays 5 Round bar trays 5 pcs.
Milk carafe 2 Milk carafe 2 pcs.
Squeeze bottles 3 Squeeze bottles 3 pcs.
Water pitcher 2 Water pitcher 2 pcs.
Ice shovels 2 Ice shovels 2 pcs.
Cooler/chest box 1 Cooler/chest box 1 pc.
All purpose tongs 2 All purpose tongs 2 pcs.
Spatula 1 Spatula 1 pc.
Coffee Filter 1 pack
TOURISM SECTOR
Qualification : I
BARISTA NC II
Existing Amendment
3.5 ..,.QU11ES
&ARISTA
•
18asec!o acass in of ZS udents rat S.
Space-.. Siz.e Meters ARa" Sq. Total Area in Sq.

lle11n Meters
iectune/.LahoT<alory rea 5xm 50 50
ash 01lmll 2x:5 10 0
a,oilRocmi/S.4JlP]y Room 5 4 20 20
Oimwla:tion mea 5x5 25 25 No Amendment

1i orkshopArN: 105
2.C - TRAINERS' QUALIFICATION (TQ)

TOURISM SECTOR
Qualification: I BARISTA NC II
Existing Amendment
• Must be a holder of National TVET Trainer
Certificate (NTTC) Level I in Barista NC 11
• Must have attended relevant upgrading Barista No Amendment
trainings and seminars
3.A- LIST OF TOOLS, EQUIPMENT AND MATERIALS
TOURISM SECTOR
Bartending NC II Tools Tools
Heavy-based glass Jiqqer 4 pcs Heavy-based glass Jiqqer 4 pcs
Double-edge stainless jigger 4 pcs Double-edge stainless jiqqer 4 pcs
Three-in-One Stainless Cocktail 4 sets Three-in-One Stainless Cocktail 4 sets
Shaker Shaker
Boston Shaker w/ mixing glass 2 sets Boston Shaker w/ mixing glass 2 sets
Tin Cans 2 pcs Tin Cans 2 pcs
Fruit Juicer/ Squeezer 2 pcs Fruit Juicer/ Squeezer 2 pcs
Bar spoon with relish fork at 4 pcs Bar spoon with relish fork at 4 pcs
other end other end
Bar Strainer(hawthorn) 4 pcs Bar Strainer(hawthorn) 4 pcs
Basic Strainer 2 pcs Basic Strainer (FINE) 2pcs
Waiter's friend Cork Screw 4 pcs Waiter's friend Cork Screw 4 pcs
Wing type or different type of 2 pcs
Cork Screw
Speed pourer 12 pcs Speed pourer 12 pcs
Bottle and can opener 4 pcs. Bottle and can opener 4 pcs.
Canulator / Cannulating knife or 2 pcs Cannulating knife or Bar knife 2 pcs.
Bar knife or lester knife
Ice bucket 4 pcs. Ice bucket 4 pcs.
Ice scooper 4 pcs Ice scooper 4 pcs
Ice tongs 4 pcs Ice tongs 4 pcs
Ice Pick 2 pcs Ice Pick 2 pcs
Chopping board 4 pcs Chopping board 4 pcs
Paring knife 4 pcs Paring knife 4 pcs
Muddler 2 pcs Muddler 2 pcs
Juice jugs (Color coded) - 6 pcs Juice jugs (Color coded) - 6 pcs
'Store and Pour' 'Store and Pour' or Carafe/
Decanters
Garnish dispenser 1 set 7 compartment Garnish 1 set
(7 compartments) dispenser
Cocktail / Bar tray 4 pcs Cocktail / Bar tray 4 pcs
Wine bucket (with stand) 1 pc Wine bucket (with stand) 1 pc
Wine basket 2 pcs Wine basket 2 pcs
Wine stopper/resealer 2 pcs Wine stopper/resealer 2 pcs
Glass-rimmer 2 sets Glass-rimmer 2 sets
Measuring Cup 4 sets Measuring Cup 4 sets
Decanter 2 pcs Decanter 2 pcs
1/2 liter Carafe 2 pcs 1/2 liter Carafe 2 pcs
¼ liter Carafe 4 pcs
4 oz. Carafe 4 pcs
Funnel 2 pcs Funnel 2 pcs
Water Pitcher (stainless) 2 pcs Water Pitcher (stainless) 2 pcs
Bar Caddy/ Organizer 1 pc Bar Caddy/ Organizer 1 pc
Coffee I Tea pot 1 pc Coffee I Tea pot 1 pc
Fruit molder 6 shapes Fruit molder or pairing knife 6 pcs
Straw dispenser I unit Straw dispenser I unit
GLASSES
Old Fashioned Glass/ rock glass 12 pcs Old Fashioned Glass/ rock 12 pcs
(6- 8oz.) glass (6 - 8oz.)
Hi Ball Glass(8-10oz) 12 pcs Hi Ball Glass(8-10oz) 12 pcs
Collins Glass(10-12 oz) 6 pcs Collins Glass(10-12 oz) 6 pcs
Zombie Glass (12-14 oz.) 6 pcs
Brandy Glass 12oz. 6 pcs Brandy Glass 12oz. 6 pcs
Brandy Glass 16oz. 3 pcs Brandy Glass 16oz. 3 pcs
Martini or Cocktail Glass 8 pcs Martini or Cocktail Glass 8 pcs
Margarita glass 8 pcs Margarita glass 8 pcs
Champage Saucer glass 10 pcs Champage Saucer glass 10 pcs
Champange Tulip glass 3 pcs Champange Tulipglass 3 pcs
Champagne Flute glass 6 pcs Champagne Flute glass 6 pcs
Cordial I pony glass 6 pcs Cordial I pony glass 6 pcs
Poco Grande Glass 4 pcs Poco Grande Glass 4 pcs
Breeze Glass 4 pcs
Squall Glass 3 pcs
Hurricane glass 2 pcs Hurricane glass 2 pcs
Sherry/ Port wine glass 3 pcs Sherry/ Port wine glass 3 pcs
Sour Glass 3 pcs Sour Glass 3 pcs
Shot Glass ( 1 and 2 oz.) 6 pcs Shot Glass ( 1 and 2 oz.) 6 pcs
Footed beer glass (12 oz.) 6 pcs Footed beer glass (12 oz.) 6 pcs
Assorted specialty / Fancy 6 pcs Assorted I Fancy Glass 3 pcs
Glass
Flair Pilsner glass ( 12 oz.) 3 pcs Flair Pilsner glass ( 12 oz.) 3 pcs
Beer Mugs (12 oz.) 3 pcs Beer Mugs (12 oz.) 3 pcs
White Wine glass 12 pcs White Wine glass 12 pcs
Red Wine glass 12 pcs Red Wine glass 12 pcs
All purpose wine glass 6 pcs All purpose wine glass 6 pcs
Footed rock glass 3 pcs
Footed Hi ball glass 3 pcs
Water Goblet 5 pcs Water Goblet 5 pcs.
Irish Coffee Glass (different 4 pcs Irish Coffee Glass 4 pcs
shapes)
Coffee cups and saucers 6 sets Coffee cups and saucers 6 sets
Teaspoon 6 pcs Teaspoon 6 pcs
Coffee Mugs 3pcs. Coffee Mugs 3 pcs.
Steaming Pitcher Steaming Pitcher (3 sizes) 3 pcs.
(3 sizes) 3
Thermometer 1 Thermometer 1
Equipment Equipment
Ice bin 1 unit Ice bin 1 unit
Speed rail / rack (Speed Wheel) 1 set Speed rail / rack (Speed Wheel) 1 set
Electric Blender 2 sets Electric Blender 2 sets
Electric mixer 1 set
Underbar refrigerator (optional) 1 unit Underbar refrigerator (optional) 1 unit
Multi-layered Refrigerator 1 unit Multi-layered Refrigerator 1 unit
Coffee maker /percolator/ 1 set Coffee maker /percolator/ 1 set
Electric Glass brushes 1 set Electric Glass brushes 1 set
(optional)
Draft Beer dispenser (mock) 1 set Draft Beer dispenser (mock) 1 set
Wash Sink with 3 compartments 1 set Wash Sink with 3 1 set
compartments
Spill mat 2 units Spill mat 2 units
Drainboard 2 pcs. Drainboard 2 pcs.
Soda Siphon 1 unit Soda Siphon 1 unit
Soda Gun (for post mix) 1 unit
(Optional)
Materials Materials
Alcoholic Beverage Supplies
Whiskey- (any brand) Whiskey- (any brand)
Scotch Blended Scotch Blended
Standard 1 bot Standard 1 bot
Premium 1 bot Premium 1 bot
Single Malt 1 bot Single Malt 1 bot
Pure Malt 1 bot Pure Malt 1 bot
American 1 bot American 1 bot
Canadian/ 1 bot Canadian/ 1 bot
Irish 1 bot Irish 1 bot
Brandy (assorted type and 3 bots Brandy (assorted type and 3 bots
brand) brand)
Cognac (different classification 3 bots Cognac (different classification 3 bots
any brands) any brands)
Any brand - Armagnac 1 btl Any brand - Armagnac 1 btl
Rum (White/ Gold flavored any 3 bots Rum (White/ Gold flavored any 3 bots
brands) brands)
Vodka (local/imported/flavored 3 bots Vodka (local/imported/flavored 3 bots
any brands) any brands)
Tequila (silver and gold) 2 bots Tequila (silver and gold) 2 bots
Gin (local/ imported -any brand 2 bots Gin {local/ imported -any brand 2 bots
Local Lambanog brand 1 bot Local Lambanog brand 1 bot
Local Basi brand 1 bot Local Basi brand 1 bot
Triple Sec 1 bot Triple Sec 1 bot
Blue Curacao 1 bot Blue Curacao 1 bot
Cointreau 1 bot Cointreau 1 bot
Grand Marnier 1 btl Grand Marnier 1 btl
Drambuie 1 bot Drambuie 1 bot
Creme de Cacao (White and 2 bots Creme de Cacao (White and 2 bots
brown) brown)
Creme de Menthe (green and 2 bots Creme de Menthe (green and 2 bots
white) white)
Creme de Bananes 1 bot Creme de Bananes 1 bot
Creme de Cassis 1 btl Creme de Cassis 1 btl
Kalhua 1 btl Kalhua 1 btl
Tia Maria (optional) 1 bot Tia Maria (optional) 1 bot
Galliano 1 bot Galliano 1 bot
Amaretto 1 bot Amaretto 1 bot
Bailey's Irish Cream 1 bot Bailey's Irish Cream 1 bot
Malibu Rum 1 bot Malibu Rum 1 bot
Benedictine 1 bot Benedictine 1 bot
Tequila Rose 1 bot Tequila Rose 1 bot
Cherry Heering 1 bot Cherry Heering 1 bot
Apricot brandy 1 bot Apricot brandy 1 bot
Peach Schnapps (or any 1 bot Peach Schnapps (or any 1 bot
variance) variance)
Strawberry flavored liqueur and 1 botl Strawberry flavored liqueur 1 bot
Other variance of Liqueurs 2 botl
Campari bitter 1 bot Campari bitter or Underberg 1 bot
Fernet Branca 1 bot
Underberg 1 bot
Angostura bitter 1 bot Angostura bitter 1 bot
Dry Vermouth 1 bot Dry Vermouth 1 bot
Sweet Vermouth 1 bot. Sweet Vermouth 1 bot.
Dubonnet 1 bot Dubonnet (Optional) 1 bot
Amer Picon 1 Amer Picon (Optional) 1 bot
Pernod bot Pernod 1bot
1bot
Dry Sherry 1 bot Dry Sherry 1 bot
Medium Sherry 1 bot Medium Sherry 1 bot
Sweet / Cream Sherry 1 bot Sweet / Cream Sherry 1 bot
Port Wine 1 bot Port Wine 1 bot
Champagne Standard brand 1 bot Champagne Standard brand 1 bot
Sparkling wine -any brand 1 bot Sparkling wine -any brand 1 bot
Rose Wine 1 bot Rose Wine 1 bot
Blush Wine 1 bot Blush Wine 1 bot
Red Wine (assorted brand) 3 bots Red Wine (assorted brand) 3 bots
White Wine (assorted brand) 3 bots White Wine (assorted brand) 3 bots
Beer (Any brand) 6 bots Beer (Any brand) 6 bots
-lager -lager( include 3 types)
- stout -ale(include 3 types)
- light
NON-ALCOHOLIC
Grenadine syrup 1 bot Grenadine syrup 1 bot
Assorted Flavored syrups 6 Assorted Flavored syrups 6
variance variance
Tonic water 8 Tonic water 8
bots/cans bots/cans
Bitter Lemon 3 Bitter Lemon 3
bots/cans bots/cans
Soda Water 8 Soda Water 8
bots/cans bots/cans
Ginger ale 4 Ginger ale 4
bots/cans bots/cans
Ginger beer 4 Ginger beer 4
bots/cans bots/cans
Cola 8 Cola 8
bots/cans bots/cans
7 up/ Sprite 6 7 up/ Sprite 6
bots/cans bots/cans
Fruit Juices (assorted flavors) 4 gals Fruit Juices (assorted flavors) 2 liters
Can start with1 liter per 5 per fruit
flavors juice
(2 liters orange; 2 liter lemon; 2 flavor
liters lime juice; 1 liter
pineapple;
1 liter cranberry juice)
Fresh milk ½lit Fresh milk 1 liter
Tea bags 12 pcs Tea bags 12 pcs
Whipped cream ½ lit. Whipped cream ½ lit.
Yoghurt Plain) 500ml Yoghurt Plain) 500ml
Coconut Cream 1 can Coconut Cream 1 can
Milk/ Cream 1 can Milk/ Cream 1 can
CONDIMENTS/PERISHABLES CONDIMENTS/PERISHABLES
Salt and Pepper Salt and Pepper 250g
each
Hot sauce Hot sauce 1 bottle
(small)
Worcestershire Sauce Worcestershire Sauce 1 bottle
(small)
Nutmeg Nutmeg 1 bottle
Cinnamon Powder/ stick Cinnamon Powder/ stick each(9g)
Cloves Cloves
Vanilla stick Vanilla stick
Fresh Fruits/ (garnish) Fresh Fruits/ (garnish)
- oranges - oranges 5 pcs
- lemon - lemon 5 pcs
- lime - lime 5 pcs
- calamansi - calamansi Optional
- strawberry - strawberry 25 pcs
- apple - apple 5 pcs
- Pineapple - Pineapple 1 pc
- mango - mango 5 pcs
Fresh vegetables /herbs Fresh vegetables /herbs
- celery stalk - celery stalk 200g
- Cucumber - Cucumber 5 pcs
- Basil - Basil 150g
- Mint Leaves - Mint Leaves 250g
Green olives Green olives 1 bottle
(64g)
Red Cherries Red Cherries 1 bottle
(150g)
Cocktail onions Cocktail onions 1 bottle
(64g)
OTHERS OTHERS
Refined Sugar Refined Sugar 250g
Ice cubes Ice cubes
10kg
Crushed ice Crushed ice
pack
CLEANING MATERIALS CLEANING MATERIALS
Rugs Rugs 2 pcs
Liquid detergents Liquid deterqents 1 bot
Mop with head Mop with head 2 pcs
Hand Towels Hand Towels 3 pcs
Waste dump Waste dump 2 pcs
Broom Broom 1 pc
Scrubbing pad Scrubbing pad 2 pcs
Sponqe Sponge 2 pcs
Duster Duster 1 pc
Squeegee Squeegee
TRAINING MATERIALS TRAINING MATERIALS
Overhead Projector with Screen I unit
Lap top / Desk top PC with
Lap top / Desk top PC 1 unit 1 unit
internet connection
White Board with eraser 1 unit White Board with eraser 1 unit
Whiteboard Marker 3 pcs
Easel stand 1set
Manila paper
2 pcs
Pen and pencil Pen and pencil
each
Masking Tapes Masking Tapes 1 roll
Transparencies
Course design / Schedule
Hand out materials / Course 25 sets Hand out materials / Course 15 sets
manual /work book manual /work book
Books on Bartending Books on Bartending 2 pcs
Books on Cocktail mixing Books on Cocktail mixing 3 pcs
Wine Books Wine Books 2 pcs
Trade Magazines Trade Magazines 5 pcs
Books about Tourism Books about Tourism 2 pcs
Related reading video materials Related video materials 5
Videos / VCD's
1 wine list 1 pc each
Comprehensive Drink List/
1 non-alcoholic drinks menu
Menu
1 alcoholic drinks menu
Comprehensive Wine List
Product literature
Empty bottles 5 bot
Empty bottles(for practice
(5 long neck bottles)
purposes)
10 pcs
Flairing bottles(silicon material) Flairing bottles (siliconmaterial)
8 pcs
4ft. x 16ft Rubber matting 4ft. x 16ft Rubber matting 1 pc.
SET-UP SET-UP
Table with chairs
Rectangular or round (small) (5 square,
8 pcs 8 pcs
table, with chairs 3 small round tables with
chairs)
Rectangular table for Rectangular table for
2 pcs 2 pcs
demonstration demonstration
Built in Bar counter with shelves Built in Bar counter with shelves
1 unit 1 unit
(Mock bar) (Mock bar)
NOTE: All Condiments/Perishables shall only be available during the actual training and the
quantities are subject to change by trainers.
3.B• TRAINING FACILITIES (TF)
TOURISM SECTOR
Qualification : BARTENDING NC II
Existing Amendment
3.5
BAR
Based100 dlas:s· e <>f 25 tu<iem:s.,1rainees.
AYN. Sq. Total AIU in Sq.

Meiers Meters
60) No Amendment
to 10
Ciraul ion Ar.ea 25
nm
3.C · TRAINERS' QUALIFICATION (TQ)

TOURISM SECTOR
Qualification: I BARIST A NC II
Existing Amendment
• Must be a holder of National TVET Trainer
Certificate (NTTC) Level I in Bartending NC
II
• Must have at least 2 years relevant No Amendment
industry experience
• Must have attended relevant and competent bar
service trainings and seminars
4.A - LIST OF TOOLS. EQUIPMENT AND MATERIALS
TOURISM SECTOR
Cookery NC II Tools Tools
Chefs knife 10 pcs Chefs knife 10 pcs
Boning knife 8 pcs Boning knife 8 pcs
Oysters knife 4 pcs Oysters knife 4 pcs
Cleaver knife 2 pcs Cleaver knife 2 pcs
Tenderizer, medium,small 8 pcs Tenderizer, medium,small 8 pcs
Skimmer, fine 8 pcs Skimmer, fine 4 pcs
Wire skimmer, small 8 pcs Wire skimmer, small 4 pcs
Skimmers, spider 8 pcs Skimmers, spider 4 pcs
Strainer,small,fine 8 pcs Strainer,small,fine 4 pcs
Siever,small 8 pcs Siever,small 4 pcs
Strainer,mediumfine 8 pcs Strainer,mediumfine 4 pcs
Turner,3" x 6" 8 pcs Turner,3" x 6" 8 pcs
Spatula 8 pcs Spatula 8 pcs
Wooden spoon 8 pcs Wooden spoon 8 pcs
Parisienne spoon 8 pcs Parisienne spoon 8 pcs
Zester 8 pcs Zester 4 pcs
Piping bag 8 pcs Piping bag 8 pcs
Pastry tubes 8 pcs Pastry tubes 8 pcs
Strainer Chinois,small 3 pcs Strainer Chinois,small 3 pcs
Strainer Chinois, medium 2 pcs Strainer Chinois, medium 2 pcs
Funnel, small 4 pcs Funnel, small 4 pcs
Funnel, medium 4 pcs Funnel, medium 4 pcs
Measuring spoon 6 sets Measuring spoon 6 sets
Tongs,8inches 10 pcs Tongs,8inches 10 pcs
Tongs, 12inches 8 pcs Tongs, 12inches 8 pcs
Measuring cup 8 sets Measuring cup 8 sets
Measuring urn 4 pcs Measuring urn 4 pcs
Ice cream scoop 2 pcs Ice cream scoop 2 pcs
Cheese Cloth 10 pcs Cheese Cloth 10 pcs
Serving spoon 24 pcs Serving spoon 24 pcs
Pepper and salt mill 4 sets Pepper and salt mill 4 sets
Weighing scale, 5 kgs 2 units Weighing scale, 5 kgs 2 units
Weighing scale, 1000 grams 4 units Weighing scale, 1000 grams 4 units
Apple corer 8 pcs Apple corer 4 pcs
Wire whisk,small 8 pcs Wire whisk,small 8 pcs
Wire whisk, medium 8 pcs Wire whisk, medium 8 pcs
Wire whisk, heavy duty 2 pcs Wire whisk, heavy duty 2 pcs
Can opener 1 pc Can opener 1 pc
Kitchen scissors 8 pcs Kitchenscissors 8 pcs
Soup Ladle, 3 oz 8 pcs Soup Ladle, 3 oz 8 pcs
Kitchen spoon 8 pcs Kitchenspoon 8 pcs
Kitchenspoon, slotted 8 pcs Kitchen spoon, slotted 8 pcs
Kitchen fork 8 pcs Kitchen fork 8 pcs
Carving fork 3 pcs Carving fork 3 pcs
PockeUpinthermometer 3 pcs PockeUpin thermometer 3 pcs
Peelers 8 pcs Peelers 8 pcs
Stock pot, large 2 pcs Stock pot, large 2 pcs
Frying pan, small 12 pcs Frying pan, small 10 pcs
Frying pan, medium 8 pcs Frying pan, medium 8 pcs
Frying pan, large 2 pcs Frying pan, large 2 pcs
Colander, small 4 pcs Colander, small 2 pcs
Colander, medium 2 pcs Colander, medium 2 pcs
Cutting board 16 pcs Cutting board 16 pcs
Fish poacher, medium 1 pc Fishpoacher, medium 1 pc
Casserole, small 12 pcs Casserole, small 6 pcs
Casserole, medium 4 pcs Casserole, medium 4 pcs
Wok, small 4 pcs Wok, small 4 pcs
Wok, medium 1 pc Wok, medium 1 pc
Double Boiler, medium 1 pc Double Boiler, medium 1 pc
Paellara 8 pcs Paellara 4 pcs
Glass rack 12 pcs Glass rack 12 pcs
Soup cup rack 12 pcs Soup cup rack 12 pcs
Plate rack 12 pcs Plate rack 12 pcs
Baking tray, small 8 pcs Baking tray, small 8 pcs
Utility tray,stainless 12 pcs Utility tray, stainless 12 pcs
Roasting pan 4 pcs Roasting pan 4 pcs
Equipment Equipment
Electric fan 1 unit Electric fan 1 unit
First aid cabinet 3 units First aid cabinet 3 units
Filing cabinet 3 Layers Filing cabinet 3 Layers
1 unit compartment 1 unit
compartment
TV 1 unit TV or Smart TV 1 unit
Video player 2 units
Emergency light 1 unit Emergency light 1 unit
Directional signage/s for each Directional signage/s for each
1 pc 1 pc
rooms rooms
Air condition 1 unit Air condition 1 unit
Telephones 1 unit Telephones 1 unit
Computers with internet 3 units Computers with internet 3 units
Fax machine 1 unit
LCD 2 units LCD 1 unit
Laboratory Equipment Laboratory Equipment
Preparation table with sink & Preparation table with sink &
shelves (approx. 45x28") 8 units shelves (approx. 45x28") 8 units
Bain Marie - table w/4 BainMarie - table w/4
1 unit 1 unit
compartments compartments
Working s/s table (fabricated) 2 units Working s/s table (fabricated) 2 units
Condiment cabinet 2 units Condiment cabinet 2 units
Washing sink tables w/3 Washing sink tables w/3
1 unit 1 unit
compartments compartments
Soak sink, optional 1 unit Soak sink, optional 1 unit
Utility shelving 8 units Utility shelving 8 units
Stainless steel rack Stainless steel rack
2 units 2 units
(5 shelves) (5 shelves)
Utility cart 1 unit Utility cart 1 unit
Floor mops 4 pcs Floor mops 4 pcs
Mop Squeezer 2 units Mop Squeezer 2 units
Broom (tambo) 4 pcs Broom (tambo) 4 pcs
Dust pan 4 pcs Dust pan 4 pcs
Garbage bin(4 gals.) 4 units Garbage bin (4 gals.) 4 units
Liquid soap dispenser 8 pcs Liquid soap dispenser 8 pcs
Paper towel dispenser 4 pcs Paper towel dispenser 4 pcs
Reach-in freezer 1 unit Reach-in freezer 1 unit
Reach-in refrigerator/
Reach-inrefrigerator 2 units Refrigerator with Built in 1 unit
Freezer
4 burner gas range w/ oven 4 units 4 burner gas range w/ oven 4 units
Stock pan burner 1 unit Stock pan burner 1 unit
Materials Materials
MEAT MEAT
Beef Beef Tenderloin 1k
Beef Ribeye 1k
Ground Beef 1k
Rack of Lamb (whole) 1k
Pork Pork Tenderloin (whole) 1k
Pork loin 1k
Pork Shoulder (whole) 1k
Ground Pork 1k
Lamb/mutton
POULTRY POULTRY
Chicken Chicken (whole) 1pcs/1.2k/pc
Chicken legs (leg and thighs) 2pcs
Chicken Breast 2pcs
Duck
Turkey
Pigeon, etc.
SEAFOOD SEAFOOD
Fish Lapu-lapu (whole) 1pc/1k/pc
Tuna Loin 500g
Shellfish Clams 1k
Mussels 1k
Oysters 1k
Squid (lumot) 1k
Crustacean Shrimp or Prawns 1k 500g
Crab 1k
PERISHABLES PERISHABLES
Vegetables Onions 1.5k
Garlic 1k
Ginger 1k
Sayote 1k
Carrots 1k
Celery 300g
Tomatoes 1k
Potatoes 3k
Parsley 200g
Spring Onion 200g
Baguio Beans/French Beans 500g
Cabbage 1 head
Lettuce (romaine, Iceberg) 1k
Cucumber 1k
Asparagus 300g
Cauliflower 1 head
Broccoli 1 head
Mushroom (button, shitake) 1k
Fruits Mango (ripe) 1k
Apple 1k
Orange 1k
Grapes 1k
Lemon 5 pcs/class
Calamansi 5009/class
Watermelon 1 pc
Melon 1 pc
Dairy products Butter (unsalted) 10 pcs (bar)
Butter (salted) 10pcs (bar)
Milk (fresh) 5 ltr
Cream (cooking) 5 ltr
Cream (baking) 5 ltr
Eggs (fresh) 2 doz
Parmesan Cheese 500g
Gruyere Cheese 300g
Emmenthal Cheese 300g
Cream Cheese 5 bars
Processed food Bacon 500g
Ham 500g
Sausage (Schueblig or 500g
Hungarian)
DRY GOODS (GROCERIES) DRY GOODS (GROCERIES)
Sauces Tomato Sauce 1 ltr
Soy sauce (kikoman) 500 ml
Mushroom sauce 500 ml
Worcestershire sauce 350 ml
Tomato Catsup 350 ml
Oyster Sauce 500 ml
Hoisin sauce 250 ml
Spices and herbs Paprika 200g
Rosemary 200g
Thyme 200g
Sage 200g
Cinnamon 200g
Turmeric 200g
Cream of Tartar 200g
Oregano 200g
Nutmeg 200g
Cayenne 200g
Curry Powder 200g
Bay leaf 100g
Basil leaves (fresh) 200g
Seasoning Salt Iodize 200g
Pepper 200g
Whole peppercorn 200g
Chili flakes 200g
White wine vinegar 500ml
Apple Cider vinegar 500ml
Salt (rock) 1k
Canned fruits Pineapple (sliced) 1can
Peaches (halves) 1can
Fruit Cocktails 1can
Canned vegetables Mushrooms (button) 200g
Green peas (frozen) 1k
Chickpeas 300g
White Asparagus 300g
Noodles Spaghetti 1k
Pasta Linguine 1k
Macaroni 1k
Lasagna 1 box
Rice California Rice 1k
Japanese Rice 1k
Risotto/ Arborio Rice 1k
Rice Flour 1k
Flour All Purpose Flour 10k
Cornstarch 1k
Potato Flour 1k
Rice Flour 1k
Bread Flour 10k
Whole wheat flour 10k
Sugar White Suaar 5k
Brown Sugar 5k
Powdered Sugar 500g
Honey 500ml
Light Corn Syrup 500ml
Maple Syrup 500ml
Others Cooking oil 1ltr
Olive Oil 1ltr
Beans
REFERENCES REFERENCES
Books
Manuals Manuals 25 pcs
Charts Chart 1 pc
CD's
Video tapes
Pictures
Magazines
MISCELLANEOUS MISCELLANEOUS
2-3k if
Charcoal Charcoal needed
Toothpicks Toothpicks 1 box
Aluminum foil Aluminum foil 1 roll/ class
Wax paper Wax paper/Baking Paper 1 roll/ class
Cling wrap Cling wrap 1 roll/ class
Tissue paper Tissue paper 1 roll/ class
Paper towel Paper towel 1 roll/ class
Liquid soap Liquid soap 1 ltr/ class
NOTE: All consumables/ingredients shall only be available during the actual training and the
quantities are subject to change by trainers.
TOURISM SECTOR
Qualification : COOKERY NC II
Existing Amendment
TR11.-JGF. CUTIES
Based on olass, of25 dents;trainees.
4() Q. .x2
lJSQ.m.
No Amendment
5sq,m.
l6sg.m.
Ti WOlbhop area: 156 sq. m. +.tOsq.m.

TOURISM SECTOR
Qualification: I COOKERY NC 11
Existing Amendment
• Must be a holder of Cookery NC II or Commercial • Must be a holder of Cookery NC 11 or Commercial
Cooking NC Ill Cooking NC 111
• Must be a holder of National TVET Trainer • Must be a holder of National TVET Trainers Certificate
Certificate (NTTC) in Cookery NC 11 (NTTC) Level I in Cookery NC 11
• Must be physically, mentally fit and holder of a • Must be physically, mentally fit and holder of a Health
Health Certificate (hepatitis-free or free of Certificate (hepatitis-free or free of any communicable
any communicable disease) disease)
• Must have at least 3 years job/industryexperience. • Must have at least 3 years job/industryexperience.
(Preferably on supervisory/ managerial level in (Preferably on supervisory/ managerial level incookery
cookery or commercial cooking) or commercial cooking)
5.A • LIST OF TOOLS, EQUIPMENT AND MATERIALS
TOURISM SECTOR
Events Equipment Equipment
Management Description Qty Description Qty
Services NC Ill Computer with internet 5 units Computer with internet 5 units
LCD projector 1 unit LCD projector or 1 unit
Flat Screen TV
Two-way radio 2 units Two-way radio 2 units
Mobile phone 2 units Mobile phone (it should be 2 units
Andriod/photo and video)
Fax machine 1 unit
Digital camera 1 unit
Video camera 1 unit
Microphone 1 unit Microphone 1 unit
Megaphone 1 unit
Materials Materials
Telephone Directory 1 set Updated Calendar/can write 1 pc.
event the timelines or event
schedules (Calendar of Events)
5.8 • TRAINING FACILITIES {TF)
TOURISM SECTOR
Qualification : EVENTS MANAGEMENT SERVICES NC Ill
Existing Amendment
3. lRA FAC LmES
Based ooadlass· ta of25students,trainees.
Size ~n Meters Total Area ·n Sq.

Meters
25sq. m
No Amendment
r:nent:'
24 sq_m.
shop area; 104sq. m.

LJ
5 .C • TRAINERS' QUALIFICATION (TQ)

TOURISM SECTOR
Qualification: I EVENTS MANAGEMENT SERVICES NC Ill
Existing Amendment
• Must have completed a Trainer's Training • Must be a holder of National TVET Trainers
Methodology Course (TM Ill) or its Certificate (NTTC) Level I in Events
equivalent Management Services NC 111
• Must be physically and mentally fit • Must be physically and mentally fit
• Must have at least 3-5 years job/industry • Must have at least 3-5 years job/industry experience
experience • Must be of good moral character
• Must be a holder of Events Management • With pleasing personality
Services NC Level Ill Certificate or equivalent • Must have attended relevant training and seminars
qualification
• Must be of good moral character
• With pleasing personality
seminars
6 A - LIST OF TOOLS., EQUIPMENT AND MATERIALS

TOURISM SECTOR
QuaIification I Existing TEM I Amendment
Food and I Tools I Tools
Beverage Services Description Qty Description Qtv
NC II Dinnerware
Dinner plates, 1O" 24 pcs Dinner plates, 1O" 24 pcs
Show/service plates/charging
Show/service plates, 11-14" 6 pcs. plate, Any kind or type, 11-14" 6 pcs.
or 12-16"
Salad plates 7-8" 24 pcs. Salad plates 7-8" 24 pcs.
Fish plates, 8-9" 24 pcs. Fish plates, 8-9" 24 pcs.
Dessert plates, 7-8" 24 pcs. Dessert plates, 7-8" 24 pcs.
Side plates or bread plates, 6" 24 pcs. Side plates or bread plates, 6" 24 pcs.
Soup plate/bowl 24 pcs. Soup plate/bowl 24 pcs.
Cups and saucers 5-6 oz 24 pcs. Cups and saucers 5-6 oz 24 pcs.
Consomme cup 12 pcs
Cutleries
Dinner knives 24 pcs. Dinner knives 24 pcs.
Dinner forks 24 pcs. Dinner forks 24 pcs.
Salad knives 24 pcs. Salad knives 24 pcs.
Salad forks 24 pcs. Salad forks 24 pcs.
Fish knives 24 pcs. Fish knives 24 pcs.
Fish forks 24 pcs. Fish forks 24 pcs.
Soup spoons (creamand Soup spoons (cream and
24 pcs. 24 pcs.
consume) consomme)
Dessert spoons 24 pcs. Dessert spoons 24 pcs.
Dessert forks 24 pcs. Dessert forks 24 pcs.
Teaspoons 24 pcs. Teaspoons 24 pcs.
Cocktail forks 24 pcs. Cocktail forks 24 pcs.
Service forks 6 pcs. Service forks 6 pcs.
Service spoons 6 pcs. Service spoons 6 pcs.
Steak knives 24 pcs. Steak knives 24 pcs.
Butter knives 24 pcs. Butter knives 24 pcs.
Oyster forks 24 pcs. Oyster forks 24 pcs.
Glassware
Red wine glasses 24 pcs. Red wine glasses 24 pcs.
White wine glasses 24 pcs. White wine glasses 24 pcs.
Water goblets 24 pcs. Water goblets 24 pcs.
Juice glasses/Hi ball 24 pcs. Juice glasses/Hi ball 24 pcs.
Champagne flute 24 pcs. Champagne flute 24 pcs.
Collins glasses 24 pcs. Collins glasses 24 pcs.
Pilsner glasses/Ice tea glasses 24 pcs. Pilsner glasses/Ice tea glasses 24 pcs.
Other Serviceware
Coffee pot 2 units Coffee pot 2 units
Tea pot 2 units Tea pot 2 units
Salt and Pepper shakers 4pcs Salt and Pepper shakers 4pcs
Service trays 6 pcs Rectangular tray 6 pcs
Silver platters 8 pcs Silver platters 8 pcs
Round (bar) trays 8 pcs Round (bar) trays 8 PCS
Tooth pick holders 4 pcs Tooth pick holders 4 pcs
Napkin holders 6 pcs Napkin holders 6 pcs
Sugar containers 5 pcs Sugar containers 5 pcs
Creamer containers 5 pcs Creamer containers 5 pcs
Sauce/gravyboats 4 pcs Sauce/gravyboats 4 pcs
Soup tureen 4 pcs Soup Tureen 4pcs
Peppermill 2 pcs Peppermill 2 pcs
Food tongs 2 pcs Food tongs 2 pcs
Sauce ladles 2 pcs. Sauce ladles 4 PCS.
Soup ladles 2 pcs. Soup ladles 2 pcs.
Cake servers 2 pcs. Cake servers 2 pcs.
Water pitchers 6 pcs. Water pitchers 6 pcs.
(Room Service) Plate covers B pcs. Food cover (different sizes) B pcs
Ice buckets with tongs 2 pcs. Ice buckets with tongs 2 pcs.
54"X 54 tablecloth 4 pcs. 54"X 54 tablecloth 4 pcs.
Table skirting cloths 2 pcs. Table skirting cloths 2 pcs.
Rectangular tablecloths 2 pcs. Rectangular tablecloths 2 pcs.
Side towels 4 pcs. Side towels 4 pcs.
16"x16" Cloth Table napkin 30 pcs. 16"x16" Cloth Table napkin 30 pcs.
Menu Folders Menu Folders 2 pcs.
Order pads Order pads 2 PCS.
Bill folder/change trays Bill folder/change trays 2 pcs.
Waiter station/cabinet Waiter station/cabinet 1 unit
Tray stand (optional) Tray stand 2 pcs.
Oval tray 2 pcs
Wine bucket with stand 2 sets
Cork screw or waiter's friend 4 pcs
Decanter (optional) 1 pc
Bread basket 4 pcs
Wine basket (optional) 1
Tables/Chai rs/Linen
Square/rectangular tables Square/rectangular tables
4 pcs. 4 pcs.
(4's/6's) (4's/6's)
round tables (B's) 2 pcs. Round tables (B's) 2 pcs.
Dining/Banquet chairs 36 pcs. Dining/Banquet chairs 36 pcs.
Rectangular table/ buffet table 2 pcs
Round table cloth - B seater 2pcs
Equipment Equipment
Point of Sale (POS) 1
Room service trolley 1 unit

TOURISM SECTOR
Qualification : I FOOD AND BEVERAGE SERVICES NC II
Existing I Amendment
1..5 TIU.a•IGF. CllJ1ES
FOOD MD BEVERAGE SERVICES NC I
ANainSq. Total Area in

llleters Sq.Melef"s
50 5
10 10
20
25 25
Workshop Area : No Amendment
1i

TOURISM SECTOR
Qualification: I FOOD AND BEVERAGE SERVICES NC II
Existing Amendment
• Must be a holder of National TVET Trainers • Must be a holder of National TVET Trainers
Certificate (NTTC) Level I in Food and Certificate (NTTC) Level I in Food and Beverage
Beverage Services NC II Services NC II
• Have at least 2 years industry experience • Have at least 2 years industry experience in the
• Must have attended and/or has related field
been involved in food and beverage service • Must have attended and/or has been
trainings, seminars, conventions or related involved in food and beverage service trainings,
activities in the last 5 years seminars, conventions or related activities in the last
5 years
7.A - LIST OF TOOLS. EQUIPMENT AND MATERIALS
TOURISM SECTOR
Qualification Existing TEM Amendments
Front Office Tools Tools
Services NC II Description Qty Description Qty
Credit Card Voucher holder 1 pc.
Bell boys cart 2 units Bell boys cart 2 units
Equipment Equipment
Description Qty Description Qtv
Computer (with reservation 1 pc. Computer (with reservation 1 unit
system) and printer system), internet and printer
Cash register 1 pc.
Fake Bills detector 1 pc. Fake Bills detector 1 pc.
Hypercom 1 pc.
Credit card imprinter 1 pc. Card reader 1 unit
Key card marker 1 pc. Key card marker 1 pc.
Key Card verifier 1 pc. Key card verifier 1 pc.
Key rack 1 pc. Key rack 1 pc.
Cash box drawer 1 pc. Cash box drawer 1 pc.
Guest folio rack 2 pcs. Guest folio rack 2 pcs.
Telephone 1 pc. Telephone 1 pc.
Typewriter 1 pc.
Fax machine 5 pcs.
Calculator 1 pc. Calculator 1 pc.
Safety deposit box/ drop vault 4 pcs. Safety deposit box/ drop vault 1 pc.
Lapel microphone 1 pc. Lapel microphone 1 pc.
Materials Materials
Log book 1 Log book 1 pc.
Room key 2 pcs. Room key 2 pcs.
Ving card 2 pcs. Key card 2 pcs.
White board/cork board 1 pc.
Empty envelopes 5 pcs. Empty envelopes 5 pcs.
Luqqagetag 5 pcs. Luggage tag 5 pcs.
Training Resources/Materials Training Resources/Materials
Registration form 25 pcs. Registration form 25 pcs.
Cancellation booking form 5 pcs. Cancellation booking form 5 pcs.
No-show forms 5 pcs. No-show forms 5 pcs.
General folio 25 pcs. General folio 25 pcs.
Credit card voucher 25 pcs.
Different forms 25 pcs.
Notice slip 5 pcs. Notice slip 5 pcs.
7.8 • TRAINING FACILITIES (TF)
TOURISM SECTOR
Qualification : FRONT OFFICE SERVICES NC II
Existing Amendment
3.5 ES
I
Baserl on ,a class· take of 20 ents · s
AnNI nSq. Total Area n Sq.

Meters Meters
56sq.m. 56sq.m.
5sq.m. 15sq.m.
21 sq.m.
No Amendment
Total workshop area: 92sq.m.
7.C • TRAINERS' QUALIFICATION (TQ)

TOURISM SECTOR
Qualification: I FRONT OFFICE SERVICES NC II
Existing Amendment
• Must be a holder of National TVET Trainers
Certificate (NTTC) Level I in Front Office
Services NC II
• Must have at least two years industry No Amendment
experience or any FO related works
• Must be a computer literate
8.A · LIST OF TOOLS I EQUIPMENT AND MATERIALS
TOURISM SECTOR
HOUSEKEEPING Tools Tools
NC II Mops 5 pcs. Mops 5 pcs.
Brushes 5 pcs. Brushes 5 pcs.
Brooms 5 pcs. Brooms 5 pcs.
Buckets 5 pcs. Buckets 5 pcs.
Dust Pans 5 pcs. Dust Pans 5 pcs.
Garbage Receptacles 2 pcs. Garbage Receptacles 2 pcs.
Sorting Baskets/ Laundry Sorting Baskets/ Laundry
Baskets 5 pcs. Baskets 5 pcs.
Step Ladder 1 pc. Step Ladder 1 pc.
Squeegee 2 pcs. Squeegee 2 pcs.
Water Hoses 2 pcs. Water Hoses 2 pcs.
Lint Free Cleaning Cloths 10 pcs. Lint Free Cleaning Cloths 10 pcs.
Scrubbing Foam 10 pcs Scrubbing Foam 10 pcs
Dish Sponges 10 pcs. Dish Sponges 10 pcs.
Spray Bottles 5 pcs. Spray Bottles 5 pcs.
Anti-Static Dusters 5 pcs. Anti-Static Dusters 5 pcs.
Gloves 25 pcs. Gloves 25 pcs.
Caution Signs 5 pcs. Caution Signs 5 pcs.
Mop Squeezer 2 pcs. Mop Squeezer 2 pcs.
Equipment Equipment
Projector Screen 1 unit Projector Screen 1 unit
Overhead Projector 1 unit LCD 1 unit
Electric Fan 2 units Electric Fan 2 units
First Aid Cabinet 1 pc. First Aid Cabinet 1 pc.
Instructor's desk chairs 1 pc. Instructor's desk chairs 1 pc.
Fire Extinguisher 3 pcs. Fire Extinguisher 3 pcs.
Emergency Light 2 pcs. Emergency Light 2 pcs.
Directional Signage 2 pcs. Directional Signage 2 pcs.
Air condition 2 units Air Condition 2 units
Armed Chairs 25 pcs.
or
Armed Chairs 25 pcs.
Rectangular Table & Chairs for
25 students
TV 1 unit TV 1 unit
Video player 1 unit Video player 1 unit
Fax machine 1 unit
Refrigerator 1 unit Refrigerator or Mini Bar 1 unit
Refrigerator (Small Refrigerator)
Hairdryer 1 unit Hairdryer 1 unit
Alarm clock 1 pc.
Shelving 1 pc. Shelving 1 pc.
Cart 1 pc. Cart/Trolley 1 pc
Trolley 1 pc.
Coffee Maker 1 unit Coffee Maker 1 unit
Electric kettle 1 unit Electric kettle/Electric Jug/ 1 unit
Thermal Jug
Electric jug 1 unit
Toilet Caddy 1 unit Toilet Caddy 1 unit
Carpet sweeper 1 unit Carpet sweeper 1 unit
Vacuum cleaner (dry and wet) 1 unit Vacuum cleaner (dry and wet) 1 unit
Polisher (electric with complete 1 unit Polisher (electric with complete 1 unit
accessories) accessories)
Washers 1 unit Washers 1 unit
Dryer 1 unit Dryer 1 unit
Flat iron 1 unit Flat iron 1 unit
Ironing Board 1 pc. Ironing Board 1 pc.
Steam pressers 1 pc. Steam pressers 1 pc.
Sorting shelves 1 pc. Sorting shelves 1 pc.
Drying cleaning machine 1 unit Drying cleaning machine 1 unit
Materials Materials
Bond paper 2 reams Bond paper 2 reams
Folders 25 pcs. Folders 25 pcs.
Logbook 1 pc. Logbook 1 pc.
Transparency acetate 1 box
White Board 2 pcs. White Board 2 pcs.
Whiteboard Markers 5 pcs. Whiteboard Markers 5 pcs.
Whiteboard Eraser 2 pcs. Whiteboard Eraser 2 pcs.
Marking Pen 5 pcs. Marking Pen 5 pcs.
Stationery 2 pcs. Stationery 2 pcs.
Linen (for single bed 2 sets Linen (for single bed 2 sets
Linen (for double bed) 2 sets Linen (for Queen bed) 2 sets
Glassware 1 set Glassware 1 set
Cutlery 1 set Cutlery 1 set
Tea 1 pack Tea 1 pack
Coffee 1 pack Coffee 1 pack
Sugar 1 pack Sugar 1 pack
Powdered Milk 1 pack Creamer 1 pack
Biscuits 1 pack Biscuits 1 pack
Bed (Single ) 1 unit Bed (Single ) 1 unit
Bed (Queen) 1 unit Bed (Queen) 1 unit
Holy Bible 1 pc Holy Bible 1 pc.
Slippers 2 pairs Slippers 2 pairs
Flashlight 5 pcs. Flashlight 1 pc.
Light fittings 1 set Light fittings 1 set
Mirrors 1 pc. Mirrors 1 pc.
Wardrobes 5 pcs. Wardrobes 5 pcs.
Hangers 5 pcs. Hangers 5 pcs.
Ashtrays 2 pcs.
Variety of linen and clothing 5 for Variety of linen and clothing 5 for
items and fabrics each items and fabrics each
items items
Cleaning agents Cleaning agents
Cleaning Detergent 5 liters Cleaning Detergent 5 liters
Liquid Detergent 5 liters Liquid Detergent 5 liters
Cleaning Solution 5 liters Cleaning Solution 5 liters
Sanitizing Agents 5 liters Sanitizing Agents 5 liters
Fabric Softener 5 liters Fabric Softener 5 liters
Chlorine Bleach 5 liters Chlorine Bleach 5 liters
All-Purpose Detergent 5 liters All-Purpose Detergent 5 liters
Stain Removing Agents 5 liters Stain Removing Agents 5 liters
Furniture and floor polishers 2 units Furniture and floor polishers 2 units
Air Freshener 5 cans Air Freshener 5 cans
Pesticides 5 cans Pesticides 5 cans
Deodorizers 5 pcs. Deodorizers 5 pcs.
Toilet Disinfectant 5 liters Toilet Disinfectant 5 liters
Overalls 5 pcs Overalls 5 pcs
Jackets 5 pcs. Jackets 5 pcs.
Aprons 25 pcs. Aprons 25 pcs.
Goqqles 15 pcs. Goqqles 15 pcs.
Masks 25 pcs. Masks 25 pcs.
Headwear 25 pcs. Headwear/Hairnet 25 pcs.
Waterproof clothing and footwear 10 pcs. Waterproof clothing and footwear 10 pcs.
Discretionary supplies Discretionary supplies
Fruits (assorted) 5 Fruits (assorted) 5
Beverages (assorted) 5 cans Beverages (assorted) 5 cans
Chocolates (assorted) 5 pcs. Chocolates (assorted) 5 pcs.
Training resources/ materials Training resources/ materials
Enterprise promotional materials 25 pcs. Enterprise promotional materials 25 pcs.
Local tourist information 25 pcs. Local tourist information 25 pcs.
Magazines 5 pcs. Magazines 5 pcs.
Newspapers 5 pcs. Newspapers 5 pcs.
Lodging agreement 2 pcs. Lodging agreement 2 pcs.
Housekeeping textbooks/ Housekeeping textbooks/
5 pcs 5 pcs
references references
TOURISM SECTOR
Qualification : I HOUSEKEEPING NC II
Existing Amendment
.5 FAOUllES
HOUSEKEEP C
lilased on1he class hit ke of 25 studl S,' inees thefo1t0W·ng are

ineoessarv:
Space- Size· llleliers ANainSq. TGltaAl rea n

Meiers Sq.
Meters
lliecture 8.x5 1. 410 . m. 4lPs: .m.
[)emo, ooki R(!)(!)m 4x6 24 .m. 24 sq. m.

l.
No Amendment
lie ·- ng Resource Center
.3x5 1. S .m. Ssq.m.
IF.acllitiesi5quiplilflent/
OirotllatiooArea 24 .m.
WOf1c$hoparea: 11, sq.m.
C - TRAINERS' QUALIFICATION (TQ)

TOURISM SECTOR
Qualification: I HOUSEKEEPING NC II
Existing Amendment
• Must be a holder of National • Must be a holder of National TVET Trainers

TVET Trainer Certificate I (TM I and NC) Certificate (NTTC) Level I in Housekeeping NC II
• Must be physically and mentally fit • Must be physically and mentally fit
• Have at least 2 years relevant • Have at least 2 years relevant job/industry
job/industry experience experience
9.A · LIST OF TOOLS. EQUIPMENT AND MATERIALS
TOURISM SECTOR
Local Guiding Tools Tools
Services NC II Description Qty Description Qty
Bull-horn 1 Bull-horn 1 pc.
Whistle 1 Whistle 1 pc.
Equipment Equipment
Computer with Internet access 12 Computer with Internet access 12 units
Tourist bus with public address Tourist bus with public address
1 1 unit
system system
Materials Materials
Tour flag/tour banner 1 Tour flag/tour banner 1 pc.
Writing material 25 Writing material 25 pcs.
White board with white board White board with white board
1 1 set
markers markers
First aid kit 1 First aid kit 1 set
General Information Sheets 25 Destination Information Sheet 25 sheets
Destination brochures 6 Destination brochures 6 copies
Actual suppliers' brochures 6 Actual suppliers' brochures 6 copies
Enterprise Policies and Enterprise Policies and
1 Procedures Manual - SOP 1 copy
Procedures Manual - SOP
Sample tour itinerary 3 Sample tour itinerary 3 copies
List of sample tour components 25 List of sample tour components 25 copies
Sample accounting documents - Sample accounting documents -
petty cash and cash advance 25 petty cash and cash advance 25 sets
voucher voucher
Sample tour voucher/exchange Sample tour voucher/exchange
25 25 copies
order order
Sample reservation request and Sample reservation request and
25 25 sets
confirmation slips confirmation slips
List of emergency services with List of emergency services with
25 25 copies
contact details contact details
Transportation fares and Transportation fares and
25 schedules 25 copies
schedules
List of significant historical List of significant historical
events and figures 25 events and figures 25 copies
List of major natural and man- List of major natural and man-
made attractions 25 made attractions 25 copies
Relevant data (socio-economic, Relevant data (socio-economic,
trade/industry, etc) 25 trade/industry, etc) 25 copies
Glossary of travel and tour terms 25 Glossary of travel and tour terms 25 copies
9.8 -TRAINING FACILITIES {TF)
TOURISM SECTOR
Qualification : LOCAL GUIDING SERVICES NC II
Existing Amendment
3S 1RA91.. G FACIU11ES
SERVICES - NC
Base:d Oli1.a lass size of 2-5st dents/trai:rnees:
Area in Sq. To Area in Sq.

,Meters Meters
25sq. m
40sq. m.
No Amendment
15sq. m.
F'aci i1!ie's/.Eq i en't/
Oirolllla'tion ea 24sq. m.
Total workshop area: 104sq.m.

TOURISM SECTOR
Qualification: I LOCAL GUIDING SERVICES NC II
Existing Amendment
• Must be a holder of National TVET • Must be a holder of National TVET
Trainer Certification (NTTC) Level I in Local Trainer Certification (NTTC) Level I in Local
Guiding Guiding
Services NC II Services NC II
• Duly Licensed by the LGU (Provincial, City or • Duly Licensed by the LGU (Provincial, City or
Municipal Level) and duly Accredited by Municipal Level) and has completed a
the DOT- recognized Community Guide or
Department of Tourism DOT Reception &
• Must be computer-literate Guiding Techniques seminar
• Must have at least 2 years job/industry • Must be computer-literate
experience Must have at least 2 years job/industryexperience
•
10.A - LIST OF TOOLS, EQUIPMENT AND MATERIALS
TOURISM SECTOR
Tourism Equipment Equipment
Promotion Description Qty Description Qty
Services NC II Computer with internet 5 units Computer with internet 5 units
LCD projector 1 unit LCD projector 1 unit
Fax machine 1 unit
Photocopier 1 unit Photocopier (optional if Printer & 1 unit
Scanner is available)
Printer 1 unit Printer or 1 unit

Printer, scan & copy machine
(combined)
Materials Materials
Telephone Directory 1 set Telephone Directory 1 set
Maps (world, national & regional) 1 set Maps (world, national & regional) 1 set
Posters of destinations Posters of destinations
Travel brochures & guidebooks Assorted Travel brochures & guidebooks Assorted
Pictures/samples of souvenirs, Assorted Pictures/samples of souvenirs, Assorted
arts & crafts & delicacies arts & crafts & delicacies
Price lists of products & services 1 set Price lists of products & services 1 set
DOT latest version, regional 1 set DOT latest version, regional 1 set
situationer reports, statistics and situationer reports, statistics and
marketing plan marketing plan
Current schedules of different 1 set Current schedules of different 1 set
modes of transportation to modes of transportation to
different local destinations different local destinations
Headset 5 sets Headset 5 sets
10.8 - TRAINING FACILITIES {TF)
TOURISM SECTOR
Qualification: TOURISM PROMOTION SERVICES NC II
Existing Amendment
Based .on a.classiritak.e 25 dents/trainees.
SpaceReQl;lnhl!IIII Sa.e 111111n Area in Sq. otllAnNiinSq.

llellef:s llelln
No Amendment
1i ..tcshoparea: 10hq.111.

TOURISM SECTOR
Qualification: I TOURISM PROMOTION SERVICES NC II
Existing Amendment
• Must be a holder of National TVET Trainer's
Certificate Level I in Tourism Promotion
Services NC II
• Must have at least 3-5 years job/industry
experience No Amendment
seminars
seminars
II. A · LIST OF TOOLS. EQUIPMENT AND MATERIALS
UTILITIES - POWER RELATED SECTOR
DIESEL POWER Tools Tools
PLANT Item/ Description Qty Item/ Description Qty
MAINTENANCE NC A frame 1 set A frame 1 set
Ill Allen wrench 1 set Allen wrench 1 set
Bearing heater 1 unt Bearing heater 1 unt
Bearing Puller 1 unt Bearing Puller 1 unt
Bench vise 1 unt Bench vise 1 unt
Caliper 150 mm 1 pc Caliper 150 mm 1 pc
Combination wrench (8-32) 1 set Combination wrench (8-32) 1 set
Crimping tool 1 set Crimping tool 1 set
Electric hand drill with bits 1 set Electric hand drill with bits 1 set
Empty drum 210 L 1 unt Empty drum 210 L 1 unt
Eye bolts and shackles 2 set Eye bolts and shackles 2 set
Feeler gauge 1 set Feeler gauge 1 set
Flashlight 1 unt Flashlight 1 unt
Grinder 1 unt Grinder 1 unt
Hacksaw 1 set Hacksaw 1 set
Heater 2 set Heater 2 set
Magnetic dial gauge 1 unt Magnetic dial gauge 1 unt
Mechanical tools (i.e. 1 set Mechanical tools (i.e. wrenches, 1 set
wrenches, pliers, screw pliers, screw drivers, etc.)
drivers, etc.)
micrometer 150mm (inside 1 set micrometer 150mm (inside and 1 set
and outside) outside)
micrometer 150mm (inside 1 set micrometer 150mm (inside and 1 set
and outside) outside)
Nozzle tester 1 unit Nozzle tester 1 unit
Panelboard key 1 pc Panelboard key 1 pc
Pliers and screw driver 1 set Pliers and screw driver 1 set
Pressure washer 1 unt Pressure washer 1 unt
Sling and shackles for 5 tons 4 sets Sling and shackles for 5 tons 4 sets
Socket wrench (8-32) 1 set Socket wrench (8-32) 1 set
Soldering set 2 set Soldering set 2 set
Torque wrench 0-1000N·m 1 unit Torque wrench 0-1000N·m 1 unit
Torque wrench 50-300N·m 1 unit Torque wrench 50-300N·m 1 unit
Wooden blocks Wooden blocks 1 set
Equipment Equipment
Generating set with control 1 unit Generating set with control panel, 1 unit
panel, 160 KW 160 KW
PPE 1 set PPE 1 set
Dummy load 1 set Dummy load 1 set
Hydraulic jack 10 tons 2 set Hydraulic jack 10 tons 2 set
Air compressor with spray gun 1 set Air compressor with spray gun 1 set
AC Clamp ammeter 1 unt AC Clamp ammeter 1 unt
Insulation tester 1 set Insulation tester 1 set
Multi tester 1 set Multi tester 1 set
Chain Block at least 3 tons 2 units Chain Block at least 3 tons 2 units
Personal Computer 10 Personal Computer 10 units
units
Materials
Assorted abrasive paper 40 pcs Assorted abrasive paper 40 pcs
Automotive wire #14 2m Automotive wire #14 2m
Automotive wire #18 2m Automotive wire #18 2m
Automotive wire, no. 12 AWG 10 m Automotive wire, no. 12 AWG 10 m
Bearing 1 pc Bearing 1 pc
Brush 2", 3", 4" 9 pcs Brush 2", 3", 4" 9 pcs
Cable ties Assorted 2 Cable ties Assorted 2
boxes boxes
Carbon remover 1 pail Carbon remover 1 pail
Contactcleaner16oz 3 cans Contact cleaner 16oz 3 cans
Coolant 40 ltrs Coolant 40 ltrs
Cotton tapes 3 rolls Cotton tapes 3 rolls
Degreaser 1 gal Degreaser 1 gal
Descaler 1 pail Descaler 1 pail
Diesel fuel 124 L Diesel fuel 124 L
Dye penetrant and developer 4 set Dye penetrant and developer 4 set
Electrical enamel 8 ltrs Electrical enamel 8 ltrs
Foam 1 roll Foam 1 roll
Electrical tapes 16 rolls Electrical tapes 16 rolls
Gasket 6 sheet Gasket 6 sheet
Grease and degreasers 4 packs Grease and degreasers 4 packs
Grinding compound (fine and 3 sets Grinding compound (fine and 3 sets
coarse) coarse)
Grinding sticks 15 pcs Grinding sticks 15 pcs
Hi temp grease 2 kgs Hi temp grease 2 kgs
Insulating varnish 20 ltrs Insulating varnish 20 ltrs
Log sheet/ Log book and 1 set Log sheet/ Log book and writing 1 set
writing tools tools
Forms and writing materials 1 set Forms and writing materials 1 set
Lube oil 124 L Lube oil 124 L
Manuals, Drawings and 1 set Manuals, Drawings and Diagrams 1 set
Diagrams
Metal marker 1 pc Metal marker 1 pc
Nylon Rope or sling 2m Nylon Rope or sling 2m
O-rings 1 kit O-rings 1 kit
Penetrating oil 3 cans Penetrating oil 3 cans
Plastic gauge 1set Plastic gauge 1set
Rags 40 kg Rags 40 kg
Replacement components 1 lot Replacement components 1 lot
(assorted) (assorted)
Rubber tapes 10 rolls Rubber tapes 10 rolls
Rust converter 1 pail Rust converter 1 pail
Safety Solvent 20 ltrs Safety Solvent 20 ltrs
Scrubbing pad 2 pcs Scrubbing pad 2 pcs
Silicon gasket maker S pcs Silicon gasket maker S pcs
Soldering lead 1 roll Soldering lead 1 roll
Spaghetti tube, 10 mm Sm Spaghetti tube, 10 mm Sm
Steel brush S pcs Steel brush S pcs
System diagrams and service 1 set System diagrams and service 1 set
manuals manuals
Terminal lugs assorted 2 Terminal lugs assorted 2
boxes boxes
Terminal lugs, ½" dia, 20 pcs Terminal lugs, ½" dia, 20 pcs
Thread sealant 2 tubes Thread sealant 2 tubes
Repair kits for 1 set Repair kits for 1 set
- Turbo charger - Turbo charger
-Water pump -Water pump
- Primary fuel filter - Primary fuel filter
Wire marker 1 kit Wire marker 1 kit
Wiring diagrams and service 1 set Wiring diagrams and service 1 set
manuals manuals
Brochures/Catalogs 1 lot Brochures/Catalogs 1 lot
Reference materials 1 lot Reference materials 1 lot
Qualification : DIESEL POWER PLANT MAINTENANCE NC 111
Existing Amendment
NO AMENDMENTS
SPACE RECIJIBEIT SIZE■IElERS
NII$
II. C-TRAINERS' QUALIFICATION (TQ)

Qualification : j DIESEL POWER PLANT MAINTENANCE NC 111
Existing Amendment
TRAINER QUALIFICATION (TQ 111)
• Must be a holder of Diesel Power Plant Maintenance

• Holder of National TVET Trainers Certificate Level 1 in
Diesel Power Plant Maintenance NC 111
NC Ill or equivalent
Methodology 111 (TM 111)
• Must be computer literate • Must have at least 2 years job/industryexperience
related to diesel power plant operation and
maintenance specifically in generating set servicing
• *Must have at least 2 years job/industryexperience
related to Diesel Power Plant Operation and
Maintenance specifically in generating set servicing
position or appropriate professional license issued by
the Professional Regulatory Commission)

PLANT OPERATION & Item/ Description Qty Item/ Description Qty
MAINTENANCE NC II Pail and Funnel 2 sets Pail and Funnel 2 sets
Lube oil pump 1 Lube oil pump 1
Fuel pump 1 unit Fuel pump 1 unit
Micrometer 150mm (inside and 1 set Micrometer 150mm (inside and 1 set
outside) outside)
Vernier Caliper 150 mm 1 pc Vernier Caliper 150 mm 1 pc
Hydrometer 1 pc Hydrometer 1 pc
Magnetic dial gauge 1 unit Magnetic dial gauge 1 unit
Pail and dipper 1 set Pail and dipper 1 set
Bench vise 1 Bench vise 1
Bearing Puller 1 Bearing Puller 1
Socket wrench (8-32") 1 set Socket wrench (8-32") 1 set
Allen wrench 1 set Allen wrench 1 set
A-frame 1 set A-frame 1 set
Slings 2 set Slings 2 sets
Eye bolts and shackles 2 set Eye bolts and shackles 2 sets
Wooden blocks 2 set Wooden blocks 2 sets
Heater 2 set Heater 2 sets
Bearing Puller 1 Bearing Puller 1 unit
Bearing heater 1 unit Bearing heater 1 unit
Soldering set 2 set Soldering set 2 sets
Torque wrench, 0-300 ft-lb. , 1/:z- 1 unit Torque wrench, 0-300 ft-lb. , 1/:z- 1 unit
drive, click-type drive, click-type
Torque wrench, 0-500 ft-lb., ¾- 1 unit Torque wrench, 0-500 ft-lb.,¾- 1 unit
Equipment Equipment
Diesel generating set 163 KW 2 units Diesel generating set 163 KW 2 units
PPE 1 set PPE 1 set
Injector calibrating equipment 1 unit Injector calibrating equipment 1 unit
Air compressor with spray gun 1 unit Air compressor with spray gun 1 unit
Hydraulic jack at least 3 tonner 2 set Hydraulic jack at least 3 tonner 2 sets
Chain block 1 pc Chain block 1 pc
Materials Materials
Turbo charger repair kit 1 set Turbo charger repair kit 1 set
O-rings and washers 10 sets O-rings and washers 10 sets
Coolant pump repair kit 1 set Coolant pump repair kit 1 set
Lube oil 100 ltrs. Lube oil 100 ltrs.
Diesel Fuel 420 ltrs. Diesel Fuel 420 ltrs.
Rags 30 kg Rags 30 kgs
Log sheet/ Log book and writing 1 set Log sheet/ Log book and writing 1 set
tools tools
Inhibitor 5 ltr Inhibitor 5 ltrs
Soft water 500 ltr Soft water 500 ltrs
Automotive Battery, 12 V, 21- 4 units Automotive Battery, 12 V, 21- 4 units
plates plates
Distilled water 3 ltr Distilled water 3 ltrs
Lube filter 4 pcs Lube filter 4 pcs
Fuel filter 2 pcs Fuel filter 2 pcs
Air filter 2 pc Air filter 2 pcs
Grease 2 kg Grease 2 kgs
Hi temp grease 2 kg Hi temp grease 2 kgs
Battery terminal lugs and 2 set Battery terminal lugs and 2 sets
clamps clamps
Terminal lugs,½" dia, 20 pc Terminal lugs,½" dia, 20 pcs
Battery cable 2m. Battery cable 2m.
Automotive wire, no. 12 AWG 10 m. Automotive wire, no. 12 AWG 10 m.
Battery terminal cleaner 16 oz 1 can Battery terminal cleaner 16 oz 1 can
Penetrating oil 3 can Penetrating oil 3 cans
Rust remover 1 gal Rust remover 1 gal
Carbon remover 1 gal Carbon remover 1 gal
Descaler 2 gal Descaler 2 gals
Steel brush 10 pc Steel brush 10 pcs
Paint Brush, asstd. sizes 3 set Paint Brush, asstd. sizes 3 sets
Plastic brush 1 pc Plastic brush 1 pc
Nozzles 6 pcs Nozzles 6 pcs
Safety Solvent 20 ltr Safety Solvent 20 ltrs
Insulating varnish, aerosol type 15 cans Insulating varnish, aerosol type 15 cans
Electrical enamel 8 ltr Electrical enamel 8 ltrs
Electrical tapes 10 roll Electrical tapes 10 rolls
Rubber tapes 10 roll Rubber tapes 10 rolls
Cotton tapes 3 roll Cotton tapes 3 rolls
Wire marker 1kit Wire marker 1 kit
Cable ties 6" 24 pc Cable ties 6" 24 pcs
OTHER MATERIALS OTHER MATERIALS
manufacturinQ specifications manufacturing specifications 1 set
repair manual repair manual 1 set
maintenance manual maintenance manual 1 set
periodic maintenance manual periodic maintenance manual 1 set
INSTRUCTIONAL MATERIALS INSTRUCTIONAL MATERIALS
reference books reference books 1 set
professional emergency professional emergency 1 set
learning guides learning guides 1 set
modules modules 1 set
CD's, VHS tapes,
transparencies
II. B • TRAINING FACILITIES (TF)
Qualification : DIESEL POWER PLANT OPERATION AND MAINTENANCE NC 11
Existing Amendment
AREA IUQ.TOTAL AREA .. ETERSSQ. EYERS
NO AMENDMENT
II. C · TRAINERS' QUALIFICATION lTQl

Qualification : I DIESEL POWER PLANT OPERATION AND MAINTENANCE NC 11
Existing Amendment
TRAINER QUALIFICATION (TQ 11)
• Must be a holder of Diesel Power Plant Operation
Diesel Power Plant Operation and Maintenance NC 11
and Maintenance NC Ill or equivalent
Methodology II (TMII) • Must be physically and mentally fit
related to diesel power plant operation and maintenance
specifically in generating set servicing
• Must have at least 2 years job/industryexperience

II A - LIST OF TOOLS. EQUIPMENT AND MATERIALS
PLANT Item/ Description Qty Item/ Description Qty
OPERATION & Pail and Funnel 2 sets Pail and Funnel 2 sets
MAINTENANCE NC Lube oil pump 1 Lube oil pump 1
Ill Fuel pump 1 unit Fuel pump 1 unit
Micrometer 150mm (inside and 1 set Micrometer 150mm (inside and 1 set
outside) outside)
Vernier Caliper 150 mm 1 pc Vernier Caliper 150 mm 1 pc
Hydrometer 1 pc Hydrometer 1 pc
Magnetic dial gauge 1 unit Magnetic dial gauge 1 unit
Pail and dipper 1 set Pail and dipper 1 set
Bench vise 1 Bench vise 1
Bearing Puller 1 Bearing Puller 1
Socket wrench (8-32") 1 set Socket wrench (8-32") 1 set
Allen wrench 1 set Allen wrench 1 set
A-frame 1 set A-frame 1 sets
Eye bolts and shackles 2 set Eye bolts and shackles 2 sets
Heater 2 set Heater 2 sets
Bearing Puller 1 Bearing Puller 1 unit
Bearing heater 1 unit Bearing heater 1 unit
Slings 2 set Slings 2 set
Wooden blocks 2 set Wooden blocks 2 set
Soldering set 2 set Soldering set 2 set
Torque wrench, 0-300 ft-lb. , ½- 1 unit Torque wrench, 0-300 ft-lb. , ½- 1 unit
Torque wrench, 0-500 ft-lb.,¾- 1 unit Torque wrench, 0-500 ft-lb.,¾- 1 unit
Equipment Equipment
Diesel generating set 163 KW 2 units Diesel generating set 163 KW 2 units
PPE 1 set PPE 1 set
Injector calibrating equipment 1 unit Injector calibrating equipment 1 unit
Air compressor with spray gun 1 unit Air compressor with spray gun 1 unit
Hydraulic jack at least 3 tonner 2 set Hydraulic jack at least 3 tonner 2 sets
Chain block 1 pc Chain block 1 pc
Materials Materials
Turbo charger repair kit 1 set Turbo charger repair kit 1 set
O-rings and washers 10 sets O-rings and washers 10 sets
Coolant pump repair kit 1 set Coolant pump repair kit 1 set
Lube oil 100 ltrs. Lube oil 100 ltrs.
Diesel Fuel 420 ltrs. Diesel Fuel 420 ltrs.
Rags 30 kg Rags 30 kgs
Log sheeU Log book and writing 1 set Log sheeU Log book and writing 1 set
tools tools
Inhibitor 5 ltr Inhibitor 5 ltrs
Soft water 500 ltr Soft water 500 ltrs
Automotive Battery, 12 V, 21- 4 units Automotive Battery, 12 V, 21- 4 units
plates plates
Distilled water 3 ltr Distilled water 3 ltr
Lube filter 4 pcs Lube filter 4 pcs
Fuel filter 2 pcs Fuel filter 2 pcs
Air filter 2 pc Air filter 2 pcs
Grease 2 kg Grease 2 kgs
Hi temp grease 2 kg Hi temp grease 2 kgs
Battery terminal lugs and clamps 2 set Battery terminal lugs and clamps 2 sets
Terminal lugs, ½" dia, 20 pc Terminal lugs, ½" dia, 20 pcs
Battery cable 2m. Battery cable 2m.
Automotive wire, no. 12 AWG 10 m. Automotive wire, no. 12 AWG 10 m.
Battery terminal cleaner 16 oz 1 can Battery terminal cleaner 16 oz 1 can
Penetrating oil 3 can Penetrating oil 3 can
Rust remover 1 gal Rust remover 1 gal
Descaler 2 gal Descaler 2 gals
Steel brush 10 pc Steel brush 10 pcs
Paint Brush, asstd. sizes 3 set Paint Brush, asstd. sizes 3 sets
Plastic brush 1 pc Plastic brush 1 pc
Nozzles 6 pcs Nozzles 6 pcs
Safety Solvent 20 ltr Safety Solvent 20 ltrs
Insulating varnish, aerosol type 15 cans Insulating varnish, aerosol type 15 cans
Electrical enamel 8 ltr Electrical enamel 8 ltrs
Electrical tapes 10 roll Electrical tapes 10 rolls
Rubber tapes 10 roll Rubber tapes 10 rolls
Cotton tapes 3 roll Cotton tapes 3 rolls.
Wire marker 1 kit Wire marker 1 kits
Cable ties 6" 24 pc Cable ties 6" 24 pcs
OTHER MATERIALS OTHER MATERIALS
manufacturing specifications manufacturing specifications 1 set
repair manual repair manual 1 set
maintenance manual maintenance manual 1 set
periodic maintenance manual periodic maintenance manual 1 set
INSTRUCTIONAL MATERIALS INSTRUCTIONAL MATERIALS
reference books reference books 1 set
professional emergency professional emergency 1 set
learning guides learning guides 1 set
modules modules 1 set
CD's, VHS tapes, transparencies
II. B · TRAINING FACILITIES (TF)
Qualification : DIESEL POWER PLANT OPERATION AND MAINTENANCE NC 111
Existing Amendment
MEAII SQ.
IETERS
NO AMENDMENTS
II. C · TRAINERS' QUALIFICATION (TQ\

Qualification: 1 DIESEL POWER PLANT OPERATION AND MAINTENANCE NC 111
Existing Amendment
TRAINER QUALIFICATION (TQ Ill)
• Must be a holder of Diesel Power Plant Operation

Diesel Power Plant Operation and Maintenance NC 111
and Maintenance NC Ill or equivalent
Must have undergone training on Training
•
Methodology Ill (TM 111) • Must be physically and mentally fit
related to diesel power plant operation and maintenance
specifically in generating set servicing

Tesda Circular: Issued

Uploaded by

Copyright:

Available Formats

Tesda Circular: Issued

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tesda Circular: Issued

Uploaded by

Copyright:

Available Formats

,.

A. TESDA Board Resolution No. 2021-13 dated 11 May 2021 on

8. It is the policy of TESDA to review the Training Regulations (TRs)

C. On 03 March 2020, during Stakeholder's Dialogue (Luzon Cluster), one of

D. One of the findings raised during the Orientation/Calibration of Inspection

E. On 17 February 2021, the Qualifications and Standards Office (QSO)

F. On 19 and 29 of March 2021, the Technical Vocational School Association

G. TVSA submitted their output with twenty-seven (27) TRs reviewed on 07

Ill. SCOPE / COVERAGE

IV. PROGRAM REGISTRATION

1. TVls which existing registered programs affected by the amended list of

2. Registration of new programs shall comply to the amended list of tools,

3. The attached, as seen in Annex A, list of Training Regulations, which has

4. To provide more flexibility in the implementation of training programs, a

5. All Regional/Provincial/District Directors are hereby instructed to process

IV. MONITORING AND FEEDBACK SYSTEM

1. The Regional and Provincial/District Offices (ROPO/DO) shall closely

Republic of the Philippines

1211" TEIDA IOARD MEETING

RNolutlon No. 2021 •

APPROVING THE AMENDMENTS OF TOOLS, EQUIPMENT AND

WHEREAS, TESDA Board, as the nat11t>na1 policy-making body of TESDA,

WHEREAS, it is the policy of TESOA to review the Training Regulations (TR)

WHEREAS, given the recent developmel1ls i1 technology and current trends

WHEREAS, during the Stakeholder's Dialogue (Luzon Cluster) on 03 March

WHEREAS, the Q ifications and Standards Office (QSO) reviewed the

WHERIAI, before the approval of the Omnibus Amendments of the Tool ,

Republic of the Philippines

121" TESDA BOARD MEETING

Reeolutlon No. 2021 •

WHEREAS, on 17 February 2021. the QSO facilitated the Consultation

WHEREAS, in the 132nd TESDA Boant System Standards Setting

WHEREAS, on 19 and 29 of March 2021, 1he Technical Vocational Schools'

WHEl,tlAS, to provide more flexibility in the implementation of training

Republic of the Philippines

121"' TESDA BOARD MEETING

RNolutlon No. 2021 • .&

WHEREAS, during the 133rd Standards Setting and Systems Development

WHEREA , afterward, such TRs are to be prioritized according to the

0 , THEREFORE, BE IT RESOLVED, AS IT HEREBY RESOLVED, that

BE IT RESOLVED FINALLY, that

Republic of the Philippines

12tt" TEIDA BOARD MEETING

Raeolutlon No. 2021 •

APPROVING THE AIIENDIIENTI OF TOOLS, EQUIPMENT AND MATERIALS

(3) All program• regilteted under the current seventy-five identified

(4) Gradu of TVET programs covered by the aforementioned Training

Approved this 11th day of May 2021.

ATTY. MARtC.,,,1.-_ - D. DE GUZMAN

EC. I It NA. PhD., CSEE

Republic of the Philippines

121" TESDA BOARD MEETING

RMolutlon No. 2021 • il

APPROVING THE AIIENDIIENT8 OF TOOLS, EQUIPMENT AND

(Original Signed) (Original Signed)

(Orig" I Signed) (Original Signed)

(Original Signed) (Original Signed)

(Original Signed) (Original Signed)

Republic of the Philippines