Data sheet · Hardware Product SPARC® Solaris™ Server

PRIMEPOWER 800
Enterprise Server

PRIMEPOWER 800
• Max. 16 SPARC64® GP 450 MHz /
560MHz processors with 8MB second-
level cache

• Memory with up to 32GB, parallel grip

• Up to 4 independent system partitions

can be set up

• Solaris 2.6, 7 and 8 as operating system

• Max. 24 PCI slots

• Crossbar with large bandwidth of

11.52GB/s with 16 processors

• N+1 redundant power supply subsystem

and option for redundant power feed

• Redundant cooling

• Replacement of major components (hard

disks, power supplies and fans) with
Solaris 2.6 and 7. System board, PCI
controller and dynamic reconfiguration
with Solaris 8 possible during operation

• 19-inch rack unit (11U) freely

configurable in upper part of each cabinet

• Operating states of the system unit can

be monitored in real-time from the system
console

www.fujitsu-siemens.com
The PRIMEPOWER 800 high-end server model - High performance / scalability
completes the growing Solaris-based server family from Because of the model structure of the PRIMEPOWER
Fujitsu Siemens Computers with the introduction of a server family, the system can be expanded to a
highly scalable alternative for customers wanting to maximum of 16 processors. Thanks to their outstanding
expand the performance bandwidth of their systems to scalability, the systems make the ideal solution for
no more than 16 processors. power-hungry applications.

The Model 800 is the ideal solution for server

consolidation and e-commerce, as well as for running - High reliability and availability of the
enterprise applications. hardware
The most vital system components of the Model 800
Solaris, the Unix-based 64-bit operating system used (hard disks, power supplies and fans) are redundantly
for all models in the PRIMEPOWER family, provides the configured and can be replaced during online operation.
proven stability. In addition, a vast range of application In addition, processors, memory and I/O bus can be
software is available to satisfy the most demanding quickly and painlessly reconfigured. This provides the
users. If you then also take into account the Fujitsu assurance that you can benefit from a maximum of
Siemens Computers RAS strategy (Reliability, system reliability and availability.
Availability, Serviceability), with its focus on delivering a
maximum of data and application availability, then the
Model 800 provides all the functions need to reduce - High availability
your total cost of ownership (TCO). Redundancy is possible for all the hardware and
software components, ensuring that system downtime
Like all the other PRIMEPOWER SMP systems from as a result of unexpected events, disasters, component
Fujitsu Siemens Computers, the Model 800 also uses failures and routine maintenance can be reduced to a
the FSC-developed SPARC64®GP processors, as well minimum. Fast resumption of operation is guaranteed
other innovative technologies such as the "world best" through inter-nodal failure notification and hot-standby
crossbar switch, in order to guarantee maximum techniques taken over from mainframe technology. The
scalability and optimum use of system resources. The Model 800 supports a number of these techniques,
total performance of the SMP configuration is which also include inter-standby and n-to-one standby.
automatically distributed over the processors, ensuring The Model 800 can also use the optional
that multiple applications always receive the resources ReliantClusterSoftware (RCS) from Fujitsu Siemens
that they need at a given time. The Model 800 is Computers, enabling a high-availability cluster system
therefore the perfect solution for numerous mission- to be set up as well as further improving the availability
critical business tasks. This powerful datacenter system of system services and applications.
has the capability to meet all requirements, including
large-scale server consolidation. System partitioning
supports the performance-optimized configuration of up
to 4 independent operating system instances.
 Technical Data· PRIMEPOWER 800 – Enterprise Server

Processor I/O slots

Type SPARC64®GP PCI (64bit) 6 slots (4x33MHz, 2x33/66MHz) /
(equivalent to SPARC V9) system board,
CPUs 1-4 CPUs / system board, max. 24 (33+33/66MHz)
max. 4 - 16 / system
Level-1 cache, (I/D) 128KB/128KB PCI controllers
Level-2 cache 8MB / CPU Ultra SCSI/D Ultra SCSI, 8bit/16bit, D,
Clock speed 450 MHz, 560 MHz 1 channel
SPECint2000 peak 312 (450 MHz), 395 (560 MHz) Ultra Dual SCSI Ultra SCSI, 8bit/16bit, D,
SPECint2000 base 286 (450 MHz), 363 (560 MHz) 2 channels
max. crossbar Fibre Channel 100MB/s FC-AL, Non-OFC
bandwidth 11.52 GB/s (with 16 Proc.) Fast Ethernet 10base-T/100base-TX,
1 or 4 channels
Main memory configuration Gigabit Ethernet 1000base-SX, 1 channel
Type ECC SDRAM, FDDI/P Dual-Attach DAS (SC connector), 100Mbps
(single chip fail correct) ATM 155/M 155Mbps via MultiMode F/Cu
min. capacity 1GB / system board, ATM 622/M 622Mbps via MultiMode Fiber
2GB / system Token Ring 100/16/4 Mbps
max. capacity 8GB / system board, WAN V.24, X.21, V.35, 2 Mbps
32GB / system ISDN S0
Expansion unit 1GB

Mass storage (hard disks)

Type Ultra SCSI Fast Wide se SPARC64® GP – Processor Features
Data rate 40 MB/s (sync, max)
min. capacity 2 x 18GB (intern) • 2x128KB on-chip cache
Expansion unit 18GB / 36GB (Ultra SCSI) • 16KB branch history table
Total capacity 1TB (internal) • Superscalar, super-pipelined processing
•
TM
VIS – Visual Instruction Set
Software • SMP cache coherency support
Operating system Solaris™ 2.6, 7 and 8 • Max. 112.5 MHz UPA bus clock
Compilers C/C++, Fortran-90, COBOL • 25 million transistors, 0.18µ technology
Standards compliance IEEE POSIX 1003.1, 1003.2, FIPS • Two load/store units
151.2, SDC 2.3, NFS, TCP/IP • Optimized branch prediction method
• Concurrent out-of-order execution of instructions
I/O interfaces
• 64-bit virtual address space
LAN 1 port / system board (10baseT /
• ECC for level-1 / level-2 cache, crossbar Parity for
100baseTX)
address translation buffer
RS232C 1 port / system board
(D-sub 25-pin)
RCI 1 port (RJ45 6-pin)
UPS 2 ports / cabinet (D-sub 9-pin)

Console
System Management
Console (SMC) to be ordered separately
 Installation data · PRIMEPOWER 800 – Enterprise Server

System cabinet Dual power Remarks

feed option

Width 766mm 204mm

Depth 1161mm 1100mm
Height 1800mm 1800mm
Maintenance area front: 1200mm, rear: 800mm 1xside
500mm
Weight 570kg 180kg without 19" chassis
Rated voltage 200-240 VAC (automatic switchover) dto.
3 AC power connections (2 x 2-pin 32A CEE connector (P+N+E) 3m power cable
system cabinet,
1 x 19" chassis)
Frequency 50/60 Hz dto.
Power draw, max. 5700W without 19" chassis
Heat generation, max. 20,520kj/h dto.
Temperature 5 to 28º C dto.
Operating height 0 – 3000m dto.
Relative humidity 20% - 80% non-condensing dto.
FCC Class A
Other standards: Safety: EN60950
EMC: EN55022 Class A
Immunity: EN50082-1, EN61000-3-2, EN61000-3-3

Free area for transport and installation

valid for system cabinet, 2nd power supply cabinet and

others min. height min. width min. depth

with packaging 2.5m 1.6m -

unpacking area, min. 2.5m (or more) 3.0m (or more) 6.0m (or more)

without packaging 2.0m 1.0m -

Published by All rights, including rights created by patent grant or registration of a Company stamp
Fujitsu Siemens Computers utility model or design, are reserved. Delivery subject to availability;
right of technical modifications reserved.
All hardware and software names used are trade names or trademarks
of their respective manufacturers.

World Wide Web: Copyright 

http://www.fujitsu-siemens.com Fujitsu Siemens Computers GmbH, 02/2001