0% found this document useful (0 votes)
55 views2 pages

Adtek - MT VI Datasheet

This document provides specifications for the MT-VI AC/DC signal converter and isolator. It has the following key features: - It can accept various input types including voltage, current, potentiometer, and strain gauge signals. The input and output ranges are programmable via dip switches. - It provides dual isolated analog output signals. - Additional specifications include an accuracy of ±0.1% of full scale, a response time of less than 250ms, span and zero adjustments of 10% and 5% of full scale respectively, and operating temperature range of 0-60°C. - Connection diagrams and mechanical dimensions are provided.

Uploaded by

20082012
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
55 views2 pages

Adtek - MT VI Datasheet

This document provides specifications for the MT-VI AC/DC signal converter and isolator. It has the following key features: - It can accept various input types including voltage, current, potentiometer, and strain gauge signals. The input and output ranges are programmable via dip switches. - It provides dual isolated analog output signals. - Additional specifications include an accuracy of ±0.1% of full scale, a response time of less than 250ms, span and zero adjustments of 10% and 5% of full scale respectively, and operating temperature range of 0-60°C. - Connection diagrams and mechanical dimensions are provided.

Uploaded by

20082012
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MT-VI AC/DC SIGNAL Converter & Isolator

 FEATURE
● 6 Popular Input and Output Ranges Programmable by dip switches
● Changeable Input Module Between V/mA , Potentiometer, Strain
Gauge, easy maintain and save stock
● Dual difference signal output available

CSM-
51mm(W) x 122.5(H) x 84.5(D) -with socket
 SPECIFICATION
Dimensions:
Mounting: Surface and DIN rail 35mm WIDE
Input Load Weight: 600g
Input Range Output Range
Impedance Resistance
0 ~ 10 mV ≥ 1MΩ 0 ~ 100 mV ≥ 100KΩ
0 ~ 50 mV ≥ 1MΩ 0~1V ≥ 100Ω
0 ~ 100 mV ≥ 1MΩ 0~5V ≥ 500Ω  ADJUSTMENT
0~1V ≥ 1MΩ 0 ~ 10 V ≥ 1KΩ
0~5V ≥ 1MΩ 1~5V ≥ 500Ω Dip Switch: Programming for O/P 1 - 6 Ranges selectable 1

0 ~ 10 V ≥ 1MΩ 2 ~ 10 V ≥ 1KΩ O/P 1 Span Adjust Pot (Clockwise: o/p1 increase) 2

1~5V ≥ 1MΩ -10 ~ 0 ~ +10 V ≥ 10KΩ O/P 1 Zero Adjust Pot (Clockwise: o/p1 increase) 3

2 ~ 10 V ≥ 1MΩ 0 ~ 1 mA ≤ 10KΩ Dip Switch: Programming for O/P 2 - 6 Ranges selectable 4

-10 ~ 0 ~ +10 V ≥ 1MΩ 0 ~ 10 mA ≤ 1KΩ O/P 2 Span Adjust Pot (Clockwise: o/p2 increase) 5

0 ~ 150 V ≥ 1MΩ 0 ~ 20 mA ≤ 500Ω O/P 2 Zero Adjust Pot (Clockwise: o/p2 increase) 6

0 ~ 300 V ≥ 1MΩ 4 ~ 20 mA ≤ 500Ω Programming for input ( on input module )


0 ~ 600 V ≥ 1MΩ INPUT V / mA : ( CODE: P1 )
SIGNAL DIP-SWITCH (INPUT)
0 ~ 100μA ≤ 1000Ω RANGE SW1 SW2 SW3 SW4
0 ~ 1 mA ≤ 100Ω 0~5V on
1~5V on on
0 ~ 10 mA ≤ 250Ω 0 ~ 10 V on
0 ~ 20 mA ≤ 250Ω 2 ~ 10 V on on
0 ~ 20 mA on
4 ~ 20 mA ≤ 250Ω 4 ~ 20 mA on on Programming for output
0~1A ≤ 0.05Ω INPUT mV : ( CODE: P2 ) OUTPUT V / mA : ( CODE: P )
0~5A ≤ 0.02Ω SIGNAL DIP-SWITCH (INPUT) SIGNAL DIP-SWITCH (OUTPUT)
RANGE SW1 SW2 SW3 SW4 RANGE SW1 SW2 SW3 SW4 SW5
0 ~ 50 mV on on 0~5V on on on
Accuracy: ±0.1% of F.S. 0 ~ 60 mV on 1~5V on on on on
0 ~ 75 mV on 0 ~ 10 V on on
Response time: ≤ 250 mS

MT-VI
0 ~ 100 mV on 2 ~ 10 V on on on
Span adjustment:: ≤ 10% of F.S. 0 ~ 150 mV on on 0 ~ 20 mA on
0 ~ 200 mV on on on 4 ~ 20 mA on on
Zero adjustment:: ≤ 5% of F.S.
AC frequency input range: 45~65Hz
≤ 0.1% of F.S.
Output ripple:
Power Supply: AC 115 or 230V ±10%, 50/60 Hz  CONNECTION DIAGRAM
MT-VI2 WITH MT-VI2 WITH
Excitation supply: DC 10V/24V, 40mA 2 Analogue 1 Analogue Output DO NOT UNPLUG
Power consumption: DC 5W, AC 6.5VA Output 1 Excit. Supply IF LIVE
EXCIT.
Operating temperature: 0~60 °C OUTPUT2 INPUT SUPPLY INPUT

Operating relative humidity: 20~95 %RH, non-condensing


Temperature coefficient: ≤ 100 PPM/°C
Storage temperature: -10~70 °C 6 5 4 3 6 5 4 3

Insulation resistance: ≥ 100MΩ@500Vdc 7 8 1 2 7 8 1 2

Surge test: 4 KV, 1.2 x 50μS

Dielectric Strength: AC 2KV, 50/60Hz, 1 min. AUX.


POWER OUTPUT1
AUX.
POWER OUTPUT1
Between Power / Input / Output / Case

 DIMENSIONS
81.0 51.0 7.6

102.5 2 xψ4.5
122.5
80.0
83.0

80.0
116.0

84.5 50.0 Unit:mm tolerance: ±0.5mm

4d545649-44-454e-53-41, Rev 1.2 MT-VI *4d545649-44-454e-53-41*


2018-03-01 1/2
 ORDERING INFORMATION
MT-VI Output Loop
— Input Type — Input Range — Output1 Range Output2 Range — Aux. Power

Current Voltage Current Voltage


MT-VI

CODE OUTPUT CODE OPTION CODE INPUT CODE INPUT CODE OUTPUT CODE OUTPUT CODE AUX. POWER
1 LOOP
Single Output D DC A1 0 ~ 100μA V1 0 ~ 50mV (*P2) A 0 ~ 1 mA 1 0 ~ 100 mV A1 AC 115 V
2 Dual Output A AC A2 0 ~ 1 mA V2 0 ~ 100mV(*P2) B 0 ~ 10 mA 2 0~1V A2 AC 230 V
T TRMS A3 0 ~ 10 mA V3 0(*P2)
~1V C 0 ~ 20 mA 3 0~5V D12 DC 12 V
A4 0 ~ 20 mA(*P1) V4 0 ~ 5 V (*P1) D 4 ~ 20 mA 4 0 ~ 10 V D24 DC 24 V
A5 4 ~ 20 mA(*P1) V5 0 ~ 10 V (*P1) E Excitation Supply 5 1~5V D48 DC 48 V
Remark: A6 0~1A V6 1 ~ 5 V (*P1) I Specify (mA o/p) 6 2 ~ 10 V D11 DC 110 V.
 When you select coding P1, P2 or P A7 0~5A V7 2 ~ 10 V (*P1) Programmable 6 7 -10 ~ +10 V
for input and output range, please ranges(by D-S):
AO Specify (mA i/p) V8 -10 ~ +10 V P 4~20/0~20 mA V Specify (Vo/p)
specify initial range.
Prog. 6 Ranges VA 0 ~ 150 V 0~5/0~10/1~5/ N None
 After change input or output range by P1
(by D-S) V/mA VB 0 ~ 300 V 2~10output
*Difference V range available
dip switches (D-S), re-calibration is to
be requested. Prog. 6 Ranges VC 0 ~ 600 V
P2
(by D-S)0~200mV VO Specify (V i/p)

*4d545649-44-454e-53-41* MT-VI 4d545649-44-454e-53-41, Rev 1.2


2/2 2018-03-01

You might also like