0% found this document useful (0 votes)
176 views12 pages

Lesson 2 Drawing Instruments and Their Use

Engineering drawings require specific tools and equipment. Important drawing tools include triangles, T-squares, French curves and protractors for constructing angles and curves. Pencils of varying hardness allow for different line weights. Standard drawing paper sizes like A3 and A4 help ensure drawings are conveniently stored. A title block with project details is typically included in the bottom margin. Compasses and dividers are used to draw and measure circles and transfer distances. Proper tools and equipment are crucial for producing clear, accurate engineering drawings.

Uploaded by

Justine joy cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
176 views12 pages

Lesson 2 Drawing Instruments and Their Use

Engineering drawings require specific tools and equipment. Important drawing tools include triangles, T-squares, French curves and protractors for constructing angles and curves. Pencils of varying hardness allow for different line weights. Standard drawing paper sizes like A3 and A4 help ensure drawings are conveniently stored. A title block with project details is typically included in the bottom margin. Compasses and dividers are used to draw and measure circles and transfer distances. Proper tools and equipment are crucial for producing clear, accurate engineering drawings.

Uploaded by

Justine joy cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Drawing Instruments and their Use

Introduction
To record information on paper, instruments and equipment are needed.
Engineering drawing is entirely a graphic language hence instruments are
essentially needed. Drawing must be clear, neat and legible in order to
serve its purpose. Hence it is extremely important for engineers to have
good speed, accuracy, legibility and neatness in the drawing work.
Important Drawing Equipment
All drawings are made by means of various instruments. The quality of
drawing depends to a large extent on the quality, adjustment and care of
the instruments.
Drawing Instruments and their Use
Drawing Paper
Drawing paper is the paper, on which drawing is to be made. All
engineering drawings are made on sheets of paper of strictly defined sizes.
The use of standard size saves paper and ensures convenient storage of
drawings. Nowadays, A3 and A4 are the most commonly used paper sizes.
The international standard establishes five preferred sizes for drawings as
tabulated bellow:
Dimension Dimension, mm Trimmed size
AO 841 x 1189
A1 594 x 841
A2 420 x 594
A3 297 x 420
A4 210 x 297
Drawing Instruments and their Use
Title Block
Title block is a rectangular frame that is located at the bottom of the sheet.
It is recommended that space should be provided in all title blocks for such
information as description of title of the drawing, dates, designer (drawer),
and name of enterprise or educational institute, size (scale):
Drawing Instruments and their Use
Title Block
Drawing Instruments and their Use
Triangles (setsquares)
They are used to construct the most common angles (i.e. 30⁰, 45⁰, 60⁰) in
technical drawings. The 45⁰ x 45⁰ and 30⁰ x 60⁰ triangles are the most commonly
used for ordinary work. They are shown in the figure below.
Drawing Instruments and their Use
T- square
It is used primarily to draw horizontal lines and for guiding the triangles when
drawing vertical and inclined lines. It is manipulated by sliding the working edge
(inner face) of the head along the left edge of the board until the blade is in the
required position.
Drawing Instruments and their Use
French curve
It is used to draw irregular curves that are not circle arcs. The shape varies
according to the shape of irregular curve.
Drawing Instruments and their Use
Protractor
It is used for laying out and measuring angle.
Drawing Instruments and their Use
Scale (ruler)
A number of kinds of scales are available for varied types of engineering design.
Figure below is a Scale with beveled edges graduated in mm are usually used.
Drawing Instruments and their Use
Pencil
The student and professional man should be equipped with a selection of good,
well-sharpened pencil with leads of various degrees of hardness such as: 9H, 8H,
7H, and 6H (hard); 5H& 4H (medium hard); 3H and 2H (medium); and H& F
(medium soft). The grade of pencil to be used for various purposes depends on
the type of line desired, the kind of paper employed, and the humidity, which
affects the surface of the paper. Standards for line quality usually will govern the
selection. For instance,
❖ 6H is used for light construction line.
❖ 4H is used for re-penciling light finished lines (dimension lines, center lines,
and invisible object lines)
❖ 2H is used for visible object lines
❖ F and H are used for all lettering and freehand work.
Drawing Instruments and their Use
Pencil
Drawing Instruments and their Use
Compass & Divider
Compass is used to draw circles and arcs both in pencil and ink. It consists of two
legs pivoted at the top. One leg is equipped with a steel needle attached with a
screw, and other shorter leg is, provided with a socket for detachable inserts.
Divider is used chiefly for transferring distances and occasionally for dividing
spaces into equal parts. i.e. for dividing curved and straight lines into any
number of equal parts, and for transferring measurements.

You might also like