Living Now With Netatmo Smart Electrical System - MODUL AR VERSION
Living Now With Netatmo Smart Electrical System - MODUL AR VERSION
Living Now With Netatmo Smart Electrical System - MODUL AR VERSION
89
Living Now with Netatmo smart electrical system - MODULAR VERSION
wired devices for light and shutter
K4003C 3584C FC80RC K4411C 4027C KG01 KW32 KM32 KW01M2 KG32M2
Note: or the use o the connected devices, the gateway, item K4500C,
item K4510C or item. FC80GT, must be installed as part o the system.
White colour cover Black colour cover Sand colour cover Neutral item (without cover)
Items in red colour: New products
86
Living Now with Netatmo smart electrical system - MODULAR VERSION
wired devices for light and shutter
K4003C 3584C FC80RC K4411C 4027C KG01 KW32 KM32 KW01M2 KG32M2
Note: or the use o the connected devices, the gateway, item K4500C,
item K4510C or item. FC80GT, must be installed as part o the system.
White colour cover Black colour cover Sand colour cover Neutral item (without cover)
Items in red colour: New products
86
Living Now with Netatmo smart electrical system - MODULAR VERSION
wireless controls for scenarios management
88
Traditional electrical system
LED and blanking modules
K4743V230T K4743V230RG K4949 K4950 K4953 KW00 KG00 KM00 KW08 KG08 KM08
2 modules
KW00M2 Cover or item K4950
KG00M2
KM00M2
White colour cover Black colour cover Sand colour cover Neutral item (without cover)
Items in red colour: New products
82
Living Now
support frames and IP44 housing
26603
Various accessories
K4704 4-module support rame supplied 503CG Protective cover or fush mounted box item 503E -
with protective shell to be used during nishing masonry works
503EV Internal resin separator - or box item 503E - or the
separation o data and power circuits
K4706 6-module support rame supplied
with protective shell 503EC Finishing cover or fush mounted box item 503E -
to be used when the box is used as a junction box
- can be painted
500/00 Pair o 35 mm screws or the 504EC Cover as above, or boxes item 504E
astening o the supports to boxes
installed below the plaster work. 506EC Cover as above, or boxes item 506E
K8102 Support or the installation o the
electri ed rame item KW8102P1, 503DE
KG8102P1, KM8102P1 in 2 module box Internal resin separator - or box item 504E
KA4902 Accessorie or 2 module support 503ED Coupling or boxes items 502E, 503E, 504E
rame - to be used on Indian (horizontal and vertical) and or box 506L (only
standard installations vertical).
It cannot be used with the box extension
Installation sequence or
the light point with IP44
enclosure
83
Traditional electrical system
other switches
White colour cover Black colour cover Sand colour cover Neutral item (without cover)
Items in red colour: New products
56
BLACK - KG SPACE - NG STEEL - ZG
(Material: techno polymer) (Material: zamak) (Material: zamak)
BLACK
WALNUT - LG NIGHT - DG
(Material: wood) (Material: techno polymer)
SELECTION TABLE
Supports
K4702 K4703 K4704 K4706
Items in red colour: New products
115
Flush-mounting
boxes
teChniCaL Sheet items 502e, 503e, 504e, 506e, 506L, 510L, 510n
Description Accessories
Masonry wall boxes, with metal clips and mortar cut-outs for the insertion of Item Description
conduit of different sections.
The ease of installation and the range of available accessories make wiring
easy and allow for total side by side installation of the boxes, both vertically Mortar guard: to protect the box during
503CG
and horizontally. Back coupling is also possible, with boxes also installed on the plastering operation (for 503E box).
the opposite sides of the same wall.
Side installation device: helps maintai-
ning the correct distance between the
503ED boxes during the masonry operations
Item Description
(for 503E, 504E, 506E boxes and, only for
vertical installation, for 506L).
Vertical partition: insulating internal resin
502E 2-module flush-mounting box partition that can be used to separate
503EV
data circuits from power circuits (for
PB503, PB504 and PB506 boxes).
Horizontal partition: insulating internal
resin partition (for 506E box). It can be
506EV
503E 3-module flush-mounting box used to separate data circuits from power
circuits.
Front cover plate: to close the box, if
503EC used as a junction box, or to ensure the
504EC possibility of future installation of devices
504E 4-module flush-mounting box 506EC inside the box (for PB503, PB504, PB506
boxes).
Dimensional data
1 my home automazione
Size and number of cut-out marks
10 Ø mm – – – – – 2
11 Ø mm – – – – – 1
20 Ø mm 11 12 14 14 20 2
25 Ø mm 1 10 14 10 10 –
20 x 32 mm – 4 4 4 2 –
21 x 29 mm – – – – 4 –
26 x 32 mm – – – 2 2 –
27 x 29 mm – 6 8 6 6 –
32 x 32 mm – 2 2 2 2 –
79 x 29 mm – 2 – 2 – –
86 x 29 mm – – – – 2 –
105 x 29 mm – – 2 – – –
503EC
504EC
506EC
503ED
503EV
503CG
506EV 2-module 502E boxes may be
installed side by side without
the need for accessories.
Finishing with 2+2+... plates
and supports, specific for the
European markets.
BT00261-a-UK
teChniCaL Sheet 2
Flush-mounting
boxes
teChniCaL Sheet items 502e, 503e, 504e, 506e, 506L, 510L, 510n
Description Accessories
Masonry wall boxes, with metal clips and mortar cut-outs for the insertion of Item Description
conduit of different sections.
The ease of installation and the range of available accessories make wiring
easy and allow for total side by side installation of the boxes, both vertically Mortar guard: to protect the box during
503CG
and horizontally. Back coupling is also possible, with boxes also installed on the plastering operation (for 503E box).
the opposite sides of the same wall.
Side installation device: helps maintai-
ning the correct distance between the
503ED boxes during the masonry operations
Item Description
(for 503E, 504E, 506E boxes and, only for
vertical installation, for 506L).
Vertical partition: insulating internal resin
502E 2-module flush-mounting box partition that can be used to separate
503EV
data circuits from power circuits (for
PB503, PB504 and PB506 boxes).
Horizontal partition: insulating internal
resin partition (for 506E box). It can be
506EV
503E 3-module flush-mounting box used to separate data circuits from power
circuits.
Front cover plate: to close the box, if
503EC used as a junction box, or to ensure the
504EC possibility of future installation of devices
504E 4-module flush-mounting box 506EC inside the box (for PB503, PB504, PB506
boxes).
Dimensional data
1 my home automazione
Size and number of cut-out marks
10 Ø mm – – – – – 2
11 Ø mm – – – – – 1
20 Ø mm 11 12 14 14 20 2
25 Ø mm 1 10 14 10 10 –
20 x 32 mm – 4 4 4 2 –
21 x 29 mm – – – – 4 –
26 x 32 mm – – – 2 2 –
27 x 29 mm – 6 8 6 6 –
32 x 32 mm – 2 2 2 2 –
79 x 29 mm – 2 – 2 – –
86 x 29 mm – – – – 2 –
105 x 29 mm – – 2 – – –
503EC
504EC
506EC
503ED
503EV
503CG
506EV 2-module 502E boxes may be
installed side by side without
the need for accessories.
Finishing with 2+2+... plates
and supports, specific for the
European markets.
BT00261-a-UK
teChniCaL Sheet 2
Flush-mounting
boxes
teChniCaL Sheet items 502e, 503e, 504e, 506e, 506L, 510L, 510n
Description Accessories
Masonry wall boxes, with metal clips and mortar cut-outs for the insertion of Item Description
conduit of different sections.
The ease of installation and the range of available accessories make wiring
easy and allow for total side by side installation of the boxes, both vertically Mortar guard: to protect the box during
503CG
and horizontally. Back coupling is also possible, with boxes also installed on the plastering operation (for 503E box).
the opposite sides of the same wall.
Side installation device: helps maintai-
ning the correct distance between the
503ED boxes during the masonry operations
Item Description
(for 503E, 504E, 506E boxes and, only for
vertical installation, for 506L).
Vertical partition: insulating internal resin
502E 2-module flush-mounting box partition that can be used to separate
503EV
data circuits from power circuits (for
PB503, PB504 and PB506 boxes).
Horizontal partition: insulating internal
resin partition (for 506E box). It can be
506EV
503E 3-module flush-mounting box used to separate data circuits from power
circuits.
Front cover plate: to close the box, if
503EC used as a junction box, or to ensure the
504EC possibility of future installation of devices
504E 4-module flush-mounting box 506EC inside the box (for PB503, PB504, PB506
boxes).
Dimensional data
1 my home automazione
Size and number of cut-out marks
10 Ø mm – – – – – 2
11 Ø mm – – – – – 1
20 Ø mm 11 12 14 14 20 2
25 Ø mm 1 10 14 10 10 –
20 x 32 mm – 4 4 4 2 –
21 x 29 mm – – – – 4 –
26 x 32 mm – – – 2 2 –
27 x 29 mm – 6 8 6 6 –
32 x 32 mm – 2 2 2 2 –
79 x 29 mm – 2 – 2 – –
86 x 29 mm – – – – 2 –
105 x 29 mm – – 2 – – –
503EC
504EC
506EC
503ED
503EV
503CG
506EV 2-module 502E boxes may be
installed side by side without
the need for accessories.
Finishing with 2+2+... plates
and supports, specific for the
European markets.
BT00261-a-UK
teChniCaL Sheet 2
Flush-mounting
boxes
teChniCaL Sheet items 502e, 503e, 504e, 506e, 506L, 510L, 510n
Description Accessories
Masonry wall boxes, with metal clips and mortar cut-outs for the insertion of Item Description
conduit of different sections.
The ease of installation and the range of available accessories make wiring
easy and allow for total side by side installation of the boxes, both vertically Mortar guard: to protect the box during
503CG
and horizontally. Back coupling is also possible, with boxes also installed on the plastering operation (for 503E box).
the opposite sides of the same wall.
Side installation device: helps maintai-
ning the correct distance between the
503ED boxes during the masonry operations
Item Description
(for 503E, 504E, 506E boxes and, only for
vertical installation, for 506L).
Vertical partition: insulating internal resin
502E 2-module flush-mounting box partition that can be used to separate
503EV
data circuits from power circuits (for
PB503, PB504 and PB506 boxes).
Horizontal partition: insulating internal
resin partition (for 506E box). It can be
506EV
503E 3-module flush-mounting box used to separate data circuits from power
circuits.
Front cover plate: to close the box, if
503EC used as a junction box, or to ensure the
504EC possibility of future installation of devices
504E 4-module flush-mounting box 506EC inside the box (for PB503, PB504, PB506
boxes).
Dimensional data
1 my home automazione
Size and number of cut-out marks
10 Ø mm – – – – – 2
11 Ø mm – – – – – 1
20 Ø mm 11 12 14 14 20 2
25 Ø mm 1 10 14 10 10 –
20 x 32 mm – 4 4 4 2 –
21 x 29 mm – – – – 4 –
26 x 32 mm – – – 2 2 –
27 x 29 mm – 6 8 6 6 –
32 x 32 mm – 2 2 2 2 –
79 x 29 mm – 2 – 2 – –
86 x 29 mm – – – – 2 –
105 x 29 mm – – 2 – – –
503EC
504EC
506EC
503ED
503EV
503CG
506EV 2-module 502E boxes may be
installed side by side without
the need for accessories.
Finishing with 2+2+... plates
and supports, specific for the
European markets.
BT00261-a-UK
teChniCaL Sheet 2
Smarther AC with Netatmo with fan coil unit actuator
Zigbee
A single Smarther AC device is installed in one room but the control of the fan coil unit
is done through actuator connected to the Smarther AC via ZigBee.
LIMITATIONS NOTES
• One Smarther AC maximum per room In an installation using FCU for air conditioning, it is required
• Suggested: maximum 10 Smarther AC for each installation/house to install one Smarther AC in each room in which fan coil unit
and maximum 10 installations/houses for each account control is required. Smarther AC is needed to measure
• A single Smarther AC can control up to 10 HVAC actuators but ambient temperature and send it to the HVAC actuator.
they must be in the same room
• All fan coil units in the same room must be of the same type.
Building Systems The images may not be definitive ones "Property Legrand - In restricted use" 28
HVAC actuator specifications
It is a DIN module ZigBee actuator able to control a Fan Coil Unit through relay and
0-10V outputs. In particular:
Building Systems The images may not be definitive ones "Property Legrand - In restricted use" 29
The Catalogue
COMMON ACCESSORIES