COMPANY

PROFILE

PT. INSANIA AIR SOLUTION

Wisma Bhakti Mulya Building, 4th floor, Suite 602, Jl. Kramat Raya No.160 Jakarta Pusat
DKI Jakarta, 10430.
Telp : (021) 3918486 | Fax : (021) 391 8487
Email : [email protected]
Website : www.insaniagrup.com
ABOUT
COMPANY

PT Insania Air Solution is a distribution company of

engineering products for manufacturing plant of
general industries in Indonesia. We specialize in
the filtration and separation technology, which
make us be Your compressed air system solution.

We supply a range of compressed air filters and

air dryers, supporting industries where ease of
integration, low cost of ownnership and energy
savings can make a real difference. Compressed
air is safe and reliable power source that is widely
used throughout industry.

We provide technical consultation, development

and services of filtration and separation
equipment for customers that require filtration
technology for applications in pharmaceutical,
food and beverage, chemical, petrochemical,
electronics, automotive and many other industries.

01
COMPRESSED AIR
AND GAS TREATMENT
LEGEND
1 Compressor
2 Condensate separator
3 Pressure vessel
4 Refrigerated compressed air dryer
5 Adsorption compressed air dryer
6 Compressed air filter
7 Condensate drain
8 Aftercooler
9 Activated carbon tower
10 Measuring system
11 Condensate distributor
12 Water/oil separator

02
SERIES
ALUMINIUM
COMPRESSED AIR FILTER

FILTER ELEMENTS
COMPRESSED AIR FILTER

CONDENSATE DRAINS

EMD SERIES
EMD series is also equipped with operation alarm,
led indicator, test button and internal strainer.

03
ALTERNATIVE FILTER ELEMENTS
FOR COMPRESSED AIR

ABAC (new) - plastic end caps Alternative process filter elements

ABAC (old) - plastic end caps DONALDSON - stainless steel end caps 1.4301 (304)
AGRE (new)- plastic end caps EKOMAK - plastic end caps
AGRE (old) - plastic end caps EKOMAK - aluminium end caps
AIRFILTER ENGINEERING - plastic end caps FIAC - plastic end caps
AIRFILTER ENGINEERING - aluminium end caps FINITE J - aluminium end caps
ALMIG - plastic end caps FINITE (old) - aluminium end caps
ALUP (new) - plastic end caps FUSHENG (new) - plastic end caps
ALUP (previous) - plastic end caps FUSHENG (old) - plastic end caps
ALUP (old) - plastic end caps FUSHENG (old) - aluminium end caps
ATLAS COPCO + - plastic end caps HANKISON NGF - plastic end caps
ATLAS COPCO - plastic end caps HANKISON - aluminium end caps
ATLAS COPCO - aluminium end caps HIROSS (new) - plastic end caps
ATLAS COPCO (old) - plastic end caps HIROSS (new) - aluminium end caps
ATLAS COPCO (old) - aluminium end caps HIROSS (old) - plastic end caps
ATS - plastic end caps HIROSS (old) - aluminium end caps
BALMA - plastic end caps HITACHI - aluminium end caps WORTHINGTON CREYSSENSAC (new)
BEA ARS - aluminium end caps INGERSOLL RAND AC - plastic end caps WORTHINGTON CREYSSENSAC (old) -
BEA ARV - aluminium end caps INGERSOLL RAND F - plastic end caps plastic end caps
BEA BST - aluminium end caps INGERSOLL RAND FA - plastic end caps ZANDER GL - plastic end caps
BEKO - plastic end caps KAESER (old) - aluminium end caps ZANDER - plastic end caps
BOGE HP - plastic end caps ZANDER - aluminium end caps
KAESER HP - aluminium end caps
BOGE - plastic end caps Alternative sterile/vent filter elements
KNOCKS - aluminium end caps
CECCATO (new) - plastic end caps ZANDER - stainless steel end caps
KOBELCO - plastic end caps 1.4301 (304)
CECCATO (old) - plastic end caps KSI - plastic end caps Alternative process filter elements
CHAUMECA CRB - aluminium end caps MARK (new) - plastic end caps ZANDER - stainless steel end caps
CHICAGO PNEUMATIC (new) - plastic end caps MARK (old) - plastic end caps
1.4301 (304)
CHICAGO PNEUMATIC (old) - plastic end caps MATTEI OMAT - plastic end caps ZONDER - plastic end caps
COMPAIR - plastic end caps PUSKA (new) - plastic end caps
MAUGUIERE (new) - plastic end caps
COMPAIR (previous) - plastic end caps PUSKA (old) - plastic end caps
MAUGUIERE (old) - plastic end caps
COMPAIR (previous) - aluminium end caps SCHNEIDER - plastic end caps
MIKROPOR G - aluminium end caps
DELTECH 300 - plastic end caps SMC - plastic end caps
OMI Alps - plastic end caps
DELTECH - aluminium end caps SMC - aluminium end caps
OMI (old) - plastic end caps
DOMNICK HUNTER oil-x evolution- plastic end SPX NGF - plastic end caps
ORION (new) - plastic end caps SULLAIR - plastic end caps
DOMNICK HUNTER oil-x plus - plastic end caps
ORION (new) - aluminium end caps WALKER OWA Alfa - plastic end caps
DOMNICK HUNTER HT - aluminium end caps
PNEUMATECH (new) - plastic end caps WALKER - aluminium end caps
DOMNICK HUNTER NH3- stainless steel end caps
PNEUMATECH (old) - plastic end caps WALKER HP - aluminium end caps
DONALDSON DF - plastic end caps
PREVOST MICRO - plastic end caps
DONALDSON 90` series - plastic end caps
PREVOST - aluminium end caps
DONALDSON 90` series - aluminium end caps
DONALDSON 80` series - aluminium end caps
Alternative silicone and grease free filter elements
DONALDSON - silicone and
grease free plastic end cap
DONALDSON - silicone and
grease free aluminium end cap
Alternative sterile/vent filter elements

04
COMPRESSED
AIR DRYERS,
COOLERS

NITROGEN AND OXYGEN

GENERATORS
Nitrogen generators and Oxygen generators extract the available nitrogen/oxygen in
the ambient air from the other gases by applying the Pressure Swing Adsorption
(PSA) technology.

05
SORBEO
ADSORBENT
Sorbeo type adsorbents are highly porous materials
suitable for use in many adsorption applications. Adsorbents
are available in several pack sizes. For detail spesification
please refer to technical data sheet of specific adsorbent.

1. Molecular sieve 3A/4A/10A

2. activated alumina
3. silica gel SGW/SGR/SGWS
4. activated carbon
5. catalyst
6. carbon molecular sieve
7. soda lime
8. bentonite

1 2 3 4

5 6 7 8

06
MEASUREMENT SYSTEMS
& INDICATOR
MEASUREMENT SYSTEMS
Compressed air is one of the most common but also one of the most expensive energy
sources in industry. Quality and energy efficient air compressor is definitely the most
important component of every compressed air system but without appropriate air treatment
and measuring equipment it is not possible to provide quality and low cost compressed air.

INDICATORS
Pressure drop is a huge problem in compressed air system. Every additional obstruction of
compressed air flow requires additional power to drive the compressor. Compressed air
system pipeline has fixed pressure drop, which has already been taken into account in the
phase of compressor dimensioning.

07
AIR COMPRESSOR FILTER

Air Filter.
Oil Filter
Separator Filter
Atlas Copco ,Ingersoll Rand , Kaeser, Sullair,
Elliott, Fusheng etc.

HVAC FILTER DUST COLLECTOR FILTER

Filter Bag
Cellulose Cartridge Filter
Polyester Cartridge Filter
Pleated Bag Filter
HEPA Filter
Panel Filter
V-Bank Air Filter
Active Carbon Air Filter
Pocket Bag Air Filter
Panel Filter

08
SCREW COMPRESSOR MEGA AIR

Regular Maintenance Work

Repair of Compressor
Maintenance and renovation
of the screw block
Original and alternative
spare parts

09
COMPRESSED AIR SYSTEM

HVAC SYSTEM DUST COLLECTOR

SYSTEM

10
OUR SERVICE

COMPRESSED AIR SYSTEM

Start-Up & commissioning
Consultation & Plant survey.
Service, Repair & Preventive maintenance.
Compressed air quality measurement.
Piping Installation
Vendor Held Stock (VHS Program).

HVAC SYSTEM
Design & Build
Installation Unit
Ducting System
Air Conditioning System
Clean Room HVAC
Repair & Maintenance

DUST COLLECTOR SYSTEM

Design & Build
Installation Unit
Ducting System
Repair & Maintenance

11
OUR ACTIVITIES

12
OUR VALUABLE CUSTOMER

WWW.INSANIAGRUP.COM

13
 PT. INSANIA AIR SOLUTION
Wisma Bhakti Mulya Building, 4th floor, Suite 602,
Jl. Kramat Raya No.160 Jakarta Pusat, DKI Jakarta, 10430.
Telp : (021) 3918486 | Fax : (021) 391 8487
Email : [email protected]
Website : www.insaniagrup.com