Scribd
Upload
107 views1 page

FCC - Controle

This document is a grant of equipment authorization from the Bay Area Compliance Laboratory Corp. to SZ DJI Technology Co., Ltd. for their equipment with FCC Identifier SS3-MR1SS51905. The grant allows operation of the equipment under FCC rules for unlicensed national information infrastructure transmitters from 5745-5825 MHz at a maximum output power of 0.188 Watts. The grant notes that SAR compliance has been evaluated for extremity and body-worn exposure and users must maintain a 10mm separation distance between the device and body.

Uploaded by

Luis Henrique Marangão
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
107 views1 page

FCC - Controle

This document is a grant of equipment authorization from the Bay Area Compliance Laboratory Corp. to SZ DJI Technology Co., Ltd. for their equipment with FCC Identifier SS3-MR1SS51905. The grant allows operation of the equipment under FCC rules for unlicensed national information infrastructure transmitters from 5745-5825 MHz at a maximum output power of 0.188 Watts. The grant notes that SAR compliance has been evaluated for extremity and body-worn exposure and users must maintain a 10mm separation distance between the device and body.

Uploaded by

Luis Henrique Marangão
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

28/11/2022 10:32 FCC - OET TCB Form 731 Grant of Equipment Authorization

  

TCB GRANT OF EQUIPMENT


AUTHORIZATION TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Bay Area Compliance Laboratory Corp. Date of Grant: 10/08/2019


  1274 Anvilwood Avenue

Sunnyvale, CA 94089 Application Dated: 10/03/2019


SZ DJI TECHNOLOGY CO., LTD
14th floor, West Wing, Skyworth Semiconductor
Design Building NO.18 Gaoxin South 4th Ave,
Nanshan District, Shenzhen, Guangdong, 518057
China
 
Attention: Gary Zeng , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is
VALID ONLY for
the equipment identified hereon for use under the Commission's
Rules and Regulations listed below.
 
FCC IDENTIFIER:  SS3-MR1SS51905
Name of Grantee:  SZ DJI TECHNOLOGY CO., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: C2
Frequency Output Frequency Emission
Grant Notes  FCC Rule Parts Range (MHZ) Watts Tolerance Designator
CC 15E 5745.0
 - 
5825.0 0.188  

Output power listed is conducted. SAR compliance for extremity (Hand) and body-worn
exposure conditions have been evaluated and documented in this filing. Users and
installers must be provided with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance and must provide a minimum separation
distance of 10 mm between the device and the body. The highest reported SAR for
extremity (Hand) and body are 0.36 W/kg, 0.33 W/kg, respectively. This device has 5/20/40
MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

https://apps.fcc.gov/oetcf/tcb/reports/Tcb731GrantForm.cfm 1/1

You might also like