THE VITRAMO INFRARED HEATING

Comfortable infrared heat. Economically efficient.

VALID FROM 01.09.22

HEATING WITH INFRARED

AT THE
CEILING
THE SUN
GOES ON
HEATING WITH INFRARED

EXPERIENCE THERMAL COMFORT IN THE ROOM

WITH VITRAMO HEATING ELEMENTS

In order for a pleasant room climate to develop at all, it is

absolutely necessary to first adjust the temperature levels of the
respective room surfaces (floor, walls, ceiling) so that there are
THE AVERAGE OF THE AIR AND RADIATION
hardly any differences. Such compensation is difficult in purely
TEMPERATURE OF THE SURFACES TOGETHER FORM
THE SO-CALLED OPERATIVE TEMPERATURE. THIS
convective heating mode, since certain sections of the room
PERCEIVED TEMPERATURE IS DECISIVE FOR THE envelope are particularly heated by convection, while others remain cool.
THERMAL COMFORT IN THE ROOM.
Radiation-oriented Vitramo ceiling and wall heating elements heat sections
of the room envelope in a differentiated manner so that there are no

temperature differences between them, or only small temperature

differences. Only when it comes into contact with the warm surfaces does
the room air heat up evenly and with almost no flow.

THERMAL COMFORT IN THE ROOM

EXPERIENCED

6
THE VITRAMO PRINCIPLE

THE VITRAMO
PRINCIPLE

10
 The systems also work so efficiently because an intelligent,
electronically controlled temperature control in combination with the
Vitramo heating elements and radiant heaters largely avoids control losses. INTELLIGENT BECAUSE EFFICIENTLY COMBINED

Whether a new building is to be supplied with heat or an existing heating system is

to be replaced or supplemented: the following application examples show how the

The core idea is: The Vitramo heating system requires electrical energy.
Vitramo heating elements and radiant heaters can be used efficiently.
You don't need to buy electrical energy that you already own .

VITRAMO HEATING ELEMENTS OFFER COZY LIVING COMFORT

WITH FIRST-CLASS ENERGY EFFICIENCY AT A LOW INVESTMENT.
If you combine an energetically mature building concept consisting of an airtight,

very well insulated building shell, controlled living room ventilation with heat recovery

and photovoltaic system with the Vitramo heating system, then this form of building

Due to the constantly increasing energy requirements, new or renovated buildings heating cannot be surpassed in efficiency and comfort by any other heating system

are increasingly approaching the passive house standard. Because of that that has an Amor would be just as cheap if calculated over a period of 20 years.

If the heating requirement in these buildings continues to fall, the heating costs also

decrease. Complex and expensive heating technology can even reduce heating

costs. But if you calculate it exactly, the real annual savings achieved are so small

that the additional financial outlay for purchasing a more expensive heating system

will only be amortized in decades. The installation of expensive underfloor heating

is therefore questionable. Especially in houses with low heating loads, it is important

Whether a new building is to be supplied with heat or an existing heating
to be able to react quickly to changing conditions. In the case of underfloor heating
system is to be replaced or supplemented: the following application examples
in particular, the poor controllability leads to overheating of the rooms and thus to
show how the Vitramo heating elements and radiant heaters can be used
unnecessary energy consumption.
efficiently.

Since relatively low consumption costs are to be expected even in rooms that are

used temporarily, expensive water-bearing heating systems are not worthwhile for

this application either. Rooms that are not sufficiently heated by the existing heating

can be ideally supplemented with Vitramo heaters. For reasons of efficiency, it often
VITRAMO IS ECO DESIGN COMPLIANT
makes no sense to expand the central heating for newly developed rooms. Hobby

room, cellar, guest bathroom or roof area do not have to be permanently operated

with an expensive heating system. There are also rooms that cannot be adequately
The Vitramo system is designed
heated with the existing heating system. Even in buildings that are only used
to transfer that a specific, pleasant for humans
temporarily or temporarily, the use of conventional heating systems is difficult simply
Temperature level can be reached and maintained.
because of the often unavailable fossil fuels; not to mention the high acquisition

costs.
For this type of room temperature control, the environmentally friendly design of the

devices used is determined by Regulation (EU) 2015/1188 (ecodesign). In order to

The Vitramo heating element is suitable for this, as it heats the room pleasantly and
be able to comply with this ordinance, the heaters must achieve a certain seasonal
efficiently by means of heat radiation.
space heating efficiency.

EVEN IN HOUSES WITH A HEATING REQUIREMENT OF LESS THAN 30

This degree of utilization results from the ratio of the covered heating requirement
kWh/m²a, IT IS NO LONGER ABOUT HOW MUCH HEAT IS SUPPLIED TO THE
to the primary energy used. The primary energy is generally based on the average
ROOM, BUT IF HEAT IS NEEDED AT ALL.
efficiency of the electricity generated in the EU. This generalized approach is only

intended to provide a base value for the room temperature control to be used, which

It does not have to be a passive house, because the construction costs then is required for the ecodesign-compliant use of the devices. The country-specific

increase disproportionately in relation to the energetic benefit. Nevertheless, it is calculation methods for determining the overall efficiency of buildings remain

worth using individual passive house components, which are more efficient but only unaffected.

slightly more expensive in relation to conventional ones.

11
 THE VITRAMO INFRARED HEATING ELEMENTS

Effective yet small-format Vitramo heating elements in under embedded. The back is highly effectively thermally insulated and completed by an

E different dimensions and power levels heat up walls that

Enclose space and differentiate the floor in such a way that there are no
aluminum cover that also encloses the sides.

temperature differences between them. As a result, the prerequisites for living comfort The wall heating elements of the VL-A series are made of galvanized sheet steel.

are met without unnecessary use of energy. The front is powder coated. The elements are insulated on the back and closed with

a blank cover.

The Vitramo ceiling heating elements of the VH, VH-I, VH-IB series and the

Wall heating elements of the VL-F and VM series are in sandwich construction Vitramo heating elements of the VC-A series have an aluminum housing.

produced. They consist of a single pane of safety glass, which is heated on the back The front is anodized and thermally separated from the other components that enclose

by a heating layer that converts electrical energy into heat. This layer is glass fiber the heating element on the side and rear.

reinforced in a plastic mass

CEILING GLASS INFRARED HEATING ELEMENTS SHEET METAL WALL INFRARED HEATING ELEMENTS

HEATING ELEMENTS WITH A HEAT EMITTING GLASS HEATING ELEMENTS WITH A HEAT EMITTING SURFACE

SURFACE | MAX. 190ÿ MADE OF POWDER-COATED SHEET METAL | MAX. 105 °C for wall

mounting
for mounting on the ceiling at a height >1.8 m that is not easily accessible

GLASS WALL INFRARED HEATING ELEMENTS INFRARED RADIANT

MADE OF ALUMINIUM
HEATING ELEMENTS WITH A HEAT EMITTING GLASS

SURFACE | MAX. 120 °C for wall mounting HEATING ELEMENTS WITH HEAT EMITTING SURFACE MADE OF

ANODIZED ALUMINUM | MAX. 360 °C for ceiling and wall mounting

at heights >1.8 m that are not easily accessible

Explanation of symbols

Surface mounting On ropes Inserted into the

on the ceiling suspended system ceiling

Integrated in the ceiling Into the concrete ceiling Under table / bench

lining integrated assembled

Surface mounting Surface mounting

on the wall swivels on the wall

25
 Glass heat-emitting surface | max. 190 ° C

CEILING INFRARED HEATING ELEMENTS

OF GLASS
MAX. 190 °C | for mounting on the ceiling at a height >1.8 m that is not easily accessible

MODEL SERIES

VH LED

27
 VH SERIES CEILING HEATERS

FRAMELESS VH SERIES HEATING ELEMENT FOR SURFACE MOUNTING ON THE

SUSPENDED FROM CEILING OR ROPES

Mission stationary, for temperature control in closed rooms

with a maximum height of 4 m, preferably in the

living and working environment

For ecodesign-compliant operation, these devices must be

equipped with an external room temperature-controlled controller,

as described under Vitramo temperature control starting on page

60.

heat-emitting surface ESG glass pane made of white glass, frosted, 5 mm thick,
Standard color white similar to RAL 9010

heating medium glass fiber reinforced heating meander

embedded in plastic mass

surface temperature max. 190 °C at an ambient temperature of 20 °C

Radiation effect range from 2.5m

height from 4.0m height 10 m² of heated floor space

18 m² of heated floor space

radiation efficiency ++

protection class I

device cover Aluminum profiles that enclose the sides with aluminum

cover with thermal break on the rear, highly effective

thermal insulation, cover powder-coated in white,

temperature rise during heating operation by max. 60

Kelvin above the ambient temperature

power connection device plug mounted on the cover,

Connection socket loose, without connection cable

SERIES VH –
THE ASSEMBLY
IN THE VIDEO

Designation VH06021 VH03535 VH04848 VH06262 VH10050 VH12462

GTIN 4250939300511 4250939300535 4250939300559 4250939300573 4250939300597 4250939300610

Price € plus VAT 273.11 256.30 378.15 533.61 668.07 995.80

Rated heat output in watts Heat 220 260 550 810 1210 1650

load coverage in watts/m² that can be calculated from

2.5 m from 4.0 m 28 26 55 81 121 165
- - 31 45 67 92

Dimensions length x width x height in mm 600x210x26 350x350x26 475x475x26 618x618x26 1000x500x26 1243x618x26

Installation height with attachment in mm 44 44 44 44 44 44

Weight in kg 2.8 2.7 4.6 7.6 9.8 14.8

Voltage in VAC / 50 Hz 230 230 230 230 230 230

Rated current in A 1.0 1.1 2.4 3.5 5.3 7.2

28
CEILING GLASS INFRARED HEATING ELEMENTS

INTEGRABLE CEILING HEATING ELEMENTS VH-IB SERIES

HEATING ELEMENT OF THE VH-IB SERIES FOR INSTALLATION IN A CONCRETE CEILING

Consisting of: Installation housing VZ-

EG made of galvanized sheet metal

prepared for installation in a semi-finished concrete ceiling

and the frameless heating element

VH-IB prepared for

installation in the installation housing VZ-EG

Mission stationary, for temperature control in closed rooms with a

maximum height of 4 m, preferably in the living and working environment

For ecodesign-compliant operation, these devices must be

equipped with an external room temperature-controlled

controller, as described under Vitramo temperature control

starting on page 60.

heat-emitting surface ESG glass pane made of white glass, frosted, 5 mm thick,
Standard surface color white similar to RAL 9010

heating medium glass fiber reinforced heating meander embedded in plastic

mass

surface temperature max.190 °C at an ambient temperature of 20 °C

Radiation effect range from 2.5m

height from 4.0m height 10 m² floor space in the heated room

18 m² floor space in the heated room

radiation efficiency ++

protection class I

device cover Aluminum profiles that enclose the sides with aluminum cover with

thermal break on the back, highly effective thermal insulation, blank

cover, temperature rise during heating operation max. 60 Kelvin

above the ambient temperature

power connection Connection cable made of silicone 1.2 m long

Designation VZ-EG35 VZ-EG48 VZ-EG62

GTIN 4250939308135 4250939308142 4250939308166

Price € plus VAT 46.22 63.03 88.24

Price € incl. VAT

Dimensions length x width x height in mm 342x342x63 467x467x63 610x610x63

Cavity dimensions length x width x height in mm 328x328x60 453x453x60 596x596x60

Total length including strap in mm 679 784 947

Weight in kg 2.0 3.5 5.0

Designation VH-IB03535 VH-IB04848 VH-IB06262

GTIN 4250939301617 4250939301631 4250939301655

Price € plus VAT 264.71 399.16 605.04

Rated heat output in watts Heat 220 480 770

load coverage in watts/m² that can be calculated

from 2.5 m from 4.0 m 22 48 77

- 27 43

Dimensions length x width x height in mm 350x350x42 475x475x42 618x618x42

Glass view visible from the side after installation in mm 7 7 7

Weight in kg 3.4 6.0 9.7

Voltage in VAC / 50 Hz 230 230 230

Rated current in A 1.0 2.1 3.3

32
GLASS WALL INFRARED HEATING ELEMENTS

VL-F SERIES WALL HEATING ELEMENTS

FRAMELESS HEATING ELEMENT WITH SLIGHTLY ROUNDED CORNERS

THE VL-F SERIES FOR SURFACE MOUNTING ON THE WALL

Mission stationary, for temperature control in closed rooms

with a maximum height of 3 m, preferably in the

living and working environment VITRAMO HEATING ELEMENT WALL MOUNTED

For ecodesign-compliant operation, these devices must be

equipped with an external room temperature-controlled

controller, as described under Vitramo temperature control

starting on page 60.

heat-emitting surface ESG pane of white glass, smooth, 4 mm thick, white

similar to RAL 9010, black similar to RAL 9005

heating medium glass fiber reinforced heating meander

embedded in plastic mass

surface temperature max. 120 °C at an ambient temperature of 20 °C

radiation effective range for wall mounting k. A. possible because it depends on the

geometry of the room; the chargeable heat load coverage

corresponds to the nominal heat output

radiation efficiency +

protection class I

device cover rear aluminum cover powder-coated color white/black;

Temperature increase during heating operation max. 60

Kelvin above the ambient temperature

power connection Connection cable made of silicone 1.2 m long

mounting type horizontal and vertical wall mounting possible

Designation VL-F06060W VL-F09060W VL-F12060W

GTIN 4250939302614 4250939302621 4250939302638

Price € plus VAT 323.53 453.78 550.42

color of the surface white white white

Designation VL-F06060S VL-F09060S VL-F12060S

GTIN 4250939302645 4250939302652 4250939302669

Price € plus VAT 348.74 500.00 621.85

color of the surface black black black

Nominal heat output in watts 400 600 800

Dimensions length x width x height in mm 600x600x28 900x600x28 1200x600x28

Installation height with attachment in mm 55 55 55

Weight in kg 6.6 9.5 12.3

Voltage in VAC / 50 Hz 230 230 230

Rated current in A 1.7 2.6 3.5

34
 Glass heat-emitting surface | max. 120 ° C

GLASS WALL INFRARED HEATING

ELEMENTS | MAX. 120°
for mounting on the wall

VL-F…B SERIES WALL PICTURE HEATING ELEMENTS

FRAMELESS HEATING ELEMENT WITH SLIGHTLY ROUNDED CORNERS OF

THE VL-F…B SERIES FOR SURFACE MOUNTING ON THE WALL

Mission stationary, for temperature control in closed rooms

with a maximum height of 3 m, preferably in the

living and working environment

For ecodesign-compliant operation, these devices must be

equipped with an external room temperature-controlled

controller, as described under Vitramo temperature control

starting on page 60.

heat-emitting surface ESG glass pane made of white glass, smooth, 4 mm

thick, can be individually printed

heating medium glass fiber reinforced heating meander

embedded in plastic mass

surface temperature max. 120 °C at an ambient temperature of 20 °C

radiation effective range for wall mounting k. A. possible because it depends on the

geometry of the room; the chargeable heat load coverage

corresponds to the nominal heat output

radiation efficiency +

protection class I

device cover rear aluminum cover powder-coated color white/black;

Temperature increase during heating operation max. 60 I AM A

Kelvin above the ambient temperature FAVORITE PICTURE
WITH SPECIAL
power connection Connection cable made of silicone 1.2 m long EFFECT

mounting type horizontal and vertical wall mounting possible

Designation VL-F09060B VL-F12060B

GTIN 4250939302713 4250939302720

Price € plus VAT 684.87 768.91

Minimum number of pixels per image 4251x2834 5668x2834

Nominal heat output in watts 600 800

Dimensions length x width x height in mm 900x600x28 1200x600x28

Installation height with attachment in mm 55 55

Weight in kg 9.5 12.3

Voltage in VAC / 50 Hz 230 230

Rated current in A 2.6 3.5

33
 Glass heat-emitting surface | max. 120 ° C

VL-F…T SERIES WALL PANEL HEATING ELEMENTS

FRAMELESS PANEL HEATING ELEMENT WITH SLIGHTLY ROUNDED CORNERS OF

THE VL-F…T SERIES FOR SURFACE MOUNTING ON THE WALL

Mission stationary, for temperature control in closed rooms

with a maximum height of 3 m, preferably in the

living and working environment

For ecodesign-compliant operation, these devices must be

equipped with an external room temperature-controlled

controller, as described under Vitramo temperature control

starting on page 60.

heat-emitting surface ESG glass pane, 4 mm thick, matt black, can be

written on with blackboard chalk

heating medium glass fiber reinforced heating meander

embedded in plastic mass

surface temperature max. 120 °C at an ambient temperature of 20 °C

radiation effective range for wall mounting k. A. possible because it depends on the

geometry of the room; the chargeable heat load coverage

corresponds to the nominal heat output

radiation efficiency +

protection class I

device cover rear aluminum cover powder-coated black, temperature rise

during heating operation max. 60 Kelvin above the ambient

temperature

power connection Connection cable made of silicone 1.2 m long

mounting type horizontal and vertical wall mounting possible

Designation VL-F06060T VL-F09060T VL-F12060T

GTIN 4250939302676 4250939302683 4250939302690

Price € plus VAT 348.74 500.00 621.85

Nominal heat output in watts 400 600 800

Dimensions length x width x height in mm 600x600x28 900x600x28 1200x600x28

Installation height with attachment in mm 55 55 55

Weight in kg 6.6 9.5 12.3

Voltage in VAC / 50 Hz 230 230 230

Rated current in A 1.7 2.6 3.5

35
GLASS WALL INFRARED HEATING ELEMENTS

VM SERIES WALL MIRROR HEATING ELEMENTS

FRAMELESS MIRROR HEATING ELEMENT WITH SLIGHTLY ROUNDED CORNERS

VM SERIES FOR SURFACE MOUNTING ON THE WALL

Mission stationary, for temperature control in closed rooms

with a maximum height of 3 m, preferably in the

living and working environment

For ecodesign-compliant operation, these devices must be

equipped with an external room temperature-controlled

controller, as described under Vitramo temperature control

starting on page 60.

heat-emitting surface Single pane safety mirror, 5 mm thick

edges ground

heating medium heating mat

surface temperature max. 80 °C at an ambient temperature of 20 °C

radiation effective range for wall mounting k. A. possible because it depends on the

geometry of the room; the chargeable heat load coverage

corresponds to the nominal heat output

radiation efficiency +

protection class I

device cover bare aluminum cover on the back, temperature rise during

heating operation max. 60 Kelvin above the ambient temperature

power connection Connection cable made of silicone 1.2 m long

mounting type horizontal and vertical wall mounting possible

Designation VM09060 VM12060

GTIN 4250939303512 4250939303543

Price € plus VAT 462.18 592.44

Nominal heat output in watts 400 540

Dimensions length x width x height in mm 900x600x28 1200x600x28

Installation height with attachment in mm 55 55

Weight in kg 10.9 14.2

Voltage in VAC / 50 Hz 230 230

Rated current in A 1.7 2.3

36
 Heat-emitting surface made of powder-coated sheet metal | max. 105 °C

WALL INFRARED HEATING ELEMENTS

MADE OF POWDER-COATED SHEET
METAL | MAX. 105ºC
for mounting on the wall

MODEL SERIES

VL-A

39
SHEET METAL WALL INFRARED HEATING ELEMENTS

VL-A SERIES WALL HEATING ELEMENTS

VL-A SERIES FRAMELESS HEATING ELEMENT

FOR SURFACE MOUNTING ON THE WALL

Mission Stationary, for temperature control in closed rooms with a

maximum height of 3 m, preferably in the living and working

environment or mobile with feet in well-insulated buildings or

for occasional use

For ecodesign-compliant operation, these devices must be

equipped with an external room temperature-controlled

controller, as described under Vitramo temperature control

starting on page 60.

heat-emitting surface Galvanized sheet metal, 0.8 mm

thick, powder-coated in signal white, similar to RAL 9003

heating medium heating mat

surface temperature max. 105 °C at an ambient temperature of 20 °C

radiation effective range for wall mounting k. A. possible because it depends on the

geometry of the room; the chargeable heat load coverage

corresponds to the nominal heat output

radiation efficiency +

protection class I

Degree of protection IP44

device cover rear cover made of galvanized sheet metal, bright

surface, temperature rise during heating operation

max. 60 Kelvin above the ambient temperature

power connection Connection cable 1.2 m long

mounting type horizontal and vertical wall mounting possible

Designation VL-A06060 VL-A09060 VL-A12060 VL-A14078

GTIN 4250939306018 4250939306025 4250939306032 4250939306049

Price € plus VAT 239.50 277.31 344.54 453.78

Nominal heat output in watts 360 540 720 1090

Dimensions length x width x height in mm 600x600x21 900x600x21 1200x600x21 1400x780x21

Installation height with attachment in mm 49 49 49 49

Weight in kg 5.9 8.1 10.7 15.2

Voltage in VAC / 50 Hz 230 230 230 230

Rated current in A 1.6 2.3 3.1 4.7

40
 Heat-emitting surface made of powder-coated sheet metal | max. 105 °C

VL-A…B SERIES WALL PICTURE HEATING ELEMENTS

VL-A…B SERIES FRAMELESS PICTURE HEATING ELEMENT FOR

SURFACE WALL MOUNTING

Mission stationary, for temperature control in closed rooms with a maximum height of 3 m, preferably in the living
and working environment or mobile with feet, for occasional use

For ecodesign-compliant operation, these devices must be equipped with an external room temperature-controlled
controller, as described under Vitramo temperature control starting on page 60.

Designation VL-A06060-B VL-A09060-B VL-A12060-B VL-A14078-B

GTIN 4250939306117 4250939306124 4250939306131 4250939306148

Price € plus VAT 470.59 621.85 764.71 878.15

Minimum number of pixels per image 2834x2834 4252x2834 5669x2834 6614x3685

Nominal heat output in watts 300 450 600 900

Dimensions length x width x height in mm 600x600x21 900x600x21 1200x600x21 1400x780x21

Installation height with attachment in mm 49 49 49 49

Weight in kg 5.9 8.1 10.7 15.2

Voltage in VAC / 50 Hz 230 230 230 230

Rated current in A 1.3 2.0 2.6 3.9

Further technical data see series VL-A

The heat-emitting surface is made of galvanized sheet metal. The sheet metal is powder-coated and printed on the front

with motifs in a printable resolution according to customer requirements. After checking the printability, a draft is created in

the respective format of the heating element for approval for printing.

STANDS FOR THE VL-A AND VL-A…B SERIES

HEATING ELEMENTS OF THE VL-A AND VL-A...B SERIES CAN ALSO BE USED AS MOBILE STANDING DEVICES.

THE FEET ARE MADE OF STEEL, SURFACE COLOR WHITE.

Designation VZF-VLA73 VZF-VLA84 VZF-VLA94

GTIN 4250939308050 4250939308067 4250939308074

Price € plus VAT 155.46 163.87 172.27

height in mm 730 835 935

Horizontal mounting VLA09060; VLA09060-B VLA09060; VLA09060-B VLA09060; VLA09060-B

VLA12060; VLA12060-B VLA12060; VLA12060-B VLA12060; VLA12060-B
VLA14078; VLA14078-B VLA14078; VLA14078-B VLA14078; VLA14078-B
-
Vertical mounting VLA09060; VLA09060-B VLA09060; VLA09060-B
VLA12060; VLA12060-B

41
SHEET METAL WALL INFRARED HEATING ELEMENTS

WALL-MOUNTED BATHROOM HEATING ELEMENTS OF THE VB SERIES

FRAMELESS HEATING ELEMENT WITH TOWEL RAIL

THE VB SERIES FOR SURFACE MOUNTING ON THE WALL

Mission stationary, for temperature control in closed rooms

with a maximum height of 3 m, preferably in the

living and working environment

For ecodesign-compliant operation, these devices must be

equipped with an external room temperature-controlled

controller, as described under Vitramo temperature control

from page 60.

heat-emitting surface Galvanized sheet metal, 1.0 mm

thick, powder-coated in signal white, similar to RAL 9003

heating medium heating mat

surface temperature The heating element has two heating zones. The lower one

reaches a maximum surface temperature of 70 °C, the upper one

of a maximum of 100 °C at an ambient temperature of 20 °C, with

the towel holder being mounted in the lower area.

radiation effective range k. A. possible because it depends on the geometry of the

room; the chargeable heat load coverage corresponds to the

nominal heat output

radiation efficiency +

protection class I

Degree of protection IPX4

device cover rear cover made of galvanized sheet metal, bright surface,

temperature rise during heating operation max. 60 Kelvin above

the ambient temperature

power connection Connection cable 1.2 m long

mounting type Surface mounting on the wall, only possible in portrait format Device rear VB18060

Accesories Up to three towel holders from the VZ-B series can be

purchased as accessories and simply attached to the heating

element.

Designation VB12060 VB15060 VB18060

GTIN 4250939306308 4250939306315 4250939306322

Price € plus VAT 525.21 684.87 827.73

Nominal heat output in watts 560 660 860

Dimensions length x width x height in mm 1200x600x26 1500x600x26 1800x600x26

Installation height with attachment in mm 44 44 44

Weight in kg 10.8 14.5 15.6

Voltage in VAC / 50 Hz 230 230 230

Rated current in A 2.4 2.9 3.7

42
VITRAMO INFRARED HEATERS

VITRAMO
INFRARED HEATERS

48
 INFRARED OUTDOOR HEATER

COVERED FREE SEAT | BALCONY | TERRACE

Unlike hot air heaters or gas-powered radiant heaters, which create

We recommend protecting the effective area of the radiant heater a "chimney effect" and allow the hot ambient air required for
from the wind. Due to the visibly glowing heating medium, Vitramo combustion to flow upwards without being used, Vitramo radiant
radiant heaters achieve significantly higher source temperatures than heaters lose very little heat to the surrounding air molecule due to
Vitramo heating elements. The resulting short- wave infrared radiation their radiation-optimized properties.
penetrates the air without changing the air temperature. The heat from
the heating tube is bundled by a reflector and directed towards the upper Heating media that glow visibly produce not only heat but also
body of the individual leads to a locally felt comfort. light. Specially coated tubes that surround the heating medium
provide pleasant light for a cozy atmosphere in the evening.

The radiant heaters can be switched on in stages by remote control or

smartphone app and thus ideally adapted to the respective needs.
HOWEVER, THE INFRARED RADIATION THAT HITS
The high-quality infrared radiators ensure targeted heating of
CLOTHING AND THE SURFACE OF THE SKIN IS
IMMEDIATELY NOTICEABLE AS HEAT IN THE BODY.
people in their effective area. A pleasant warm zone is created.

The economic use of Vitramo radiant heaters is always aimed outdoors

according to the circumstances of the respective location. The more current the PUBLIC CAFÉ

wind can have on the device, the smaller and hotter the heating medium has to

be in order to be able to radiate enough heat. The infrared radiators are an ideal source of heat on the café terrace,
especially during the transitional season or in the evening, and extend the
service times. The infrared heaters are very easy to use and give off heat
immediately. Thanks to the weatherproof housing, they can be used outdoors
all year round.

23
INFRARED RADIATORS MADE OF ALUMINUM

INFRARED RADIATOR MADE

OF ANODIZED ALUMINUM |
MAX. 360°C
for mounting on the ceiling and the wall at a height >1.8 m that is not easily accessible

MODEL SERIES

VC-A

44
VITRAMO INFRARED HEATERS

INFRARED HEATER WITH

DIMLY VISIBLE GLOWING
CARBON HEATING MEDIUM
MAX. 1100 °C | for mounting at a height >1.8 m that is not easily accessible

MODEL SERIES

VC-H

50
VITRAMO INFRARED HEATERS

INFRARED HEATER WITH

DIMLY VISIBLE GLOWING
HEATING MEDIUM
APPROX. 1100 °C | for mounting on the wall at a height >1.8 m that is not easily accessible

MODEL SERIES

VC EC

52
VITRAMO INFRARED HEATERS

INFRARED HEATERS
WITH A SURFACE
MADE OF GLASS-CERAMIC
MAX. 1100 °C | for mounting on the wall at a height >1.8 m that is not easily accessible

MODEL SERIES

VC-EG

54
VITRAMO INFRARED HEATERS

INFRARED HEATERS
WITH VISIBLY GLOWING
HEATING MEDIUM | >1100ºC
for mounting on the wall at a height >1.8 m that is not easily accessible

MODEL SERIES

VC-EH

56
VITRAMO TEMPERATURE CONTROL

VITRAMO
TEMPERATURE
REGULATION

60
ON A
WAVELENGTH
WITH VITRAMO:

You can reach your personal

VITRAMO consultant

Tim Baldus
on Tel. +382 (0)68 621790

www.vitramo.com