Zero Gravity Project

4/9/23, 1:22 PM Lumen OHM
Height of a Zero Gravity Parabolic Flight

Background Information:
Have you ever wondered what it might feel like to float
weightlessly in space? One way to try it out is to fly on a special
aircraft that astronauts use to train for their trips to space.
Both NASA and the Russian Space Agency have been flying
these for years. The way it is done is to fly to a high altitude,
drop down to gain speed, then start a large parabolic path up
in the sky. For a time ranging from 10 to 20 seconds, along the top part of the parabolic flight,
an environment simulating zero gravity is created within the plane. This effect can cause
some nausea in the participants, giving rise to the name "Vomit Comet", the plane used by
NASA for zero-G parabolic training flights. Currently, there is also a private company that will
sell you a zero-G ride, though it is a bit expensive.
This lab will have you develop a mathematical model for the parabolic path.
It is composed of three parts.
Part I
You will find the system of equations needed to find the values to create the model. Using
three given data points that describe the altitude (the height in feet) of the plane at a given
time (in seconds), you will determine a 3X3 system of linear equations. You will also write the
system as an augmented matrix.
Part II
You will find the solution of the system of equations which gives you the coefficients, a, b,
and c that you will use for the quadratic model of the flight: h(t) = at + bt + c
2
You will also use your model to find the time that the maximum height of the plane is
reached and the maximum height itself.
Part III
You will visualize the model by plotting the function on an appropriately scaled set of axes.
P artI
The Data: Here are three times and the measured height of the plane at those times.
Time (t) in Height (h) in
seconds feet
https://ohm.lumenlearning.com/assess2/?cid=68919&aid=5094315#/print 2/9
2 23787
20 31887
40 33287
To find the coefficients for your model, plug the data into the equation:
2
h = at + bt + c
The data points are just like x and y values, where the x value is the time t in seconds and
the y value is the altitude h in feet. Plug these into the model to get three linear equations
with variables a , b ,and c .
Data Values Enter the resulting equation
(2, 23787) a ( 2 ) 2 + b ( 2 ) + c = 23787
(20, 31887)
a ( 20 ) 2 + b ( 20 ) + c = 31887
(40, 33287)
a ( 40 ) 2 + b ( 40 ) + c = 33287
Now that you have your system of 3 equations with 3 unknowns, you will have to solve it. For
this lab, you can solve the system using any method you prefer.
Question 2 7/7 pts 88-98
Height of a Zero Gravity

Parabolic Flight, Part II
In P artI you found a 3x3 system of equations using data from the flight. The solution to that
system can now be used to create the quadratic model that gives the height of the plane as a
function of time.
a) Enter the solutions to your system here:
a = -10
b = 670
c = 22487
b) Use your solutions to form the quadratic model of the flight:
h(t) = −10t2 + 670t + 22487
c) Use h(t) to find the time when the plane reaches its maximum height. Round your answer
to one decimal place, if necessary:
t max = 33.5 seconds
d) Use h(t) and t max to find the maximum height the plane reaches. Round your answer to
the nearest foot.
h max = 33709.5 feet
e) The time and the maximum height correspond to what point on the graph of h(t)? Fill in
the answer below.
(t max , h max ) is the vertex of the parabola.
Take note of your answers to parts c) and d) as you will need them in P artI I I to graph h(t).
Height of Zero Gravity

Parabolic Flight, Part III
In P artI I of this lab, you found the quadratic function, h(t), that models the parabolic flight
used to acheive "zero-G".
a) Let's confirm you have the correct function. Enter it below.
h(t) = ( −10 2 + 670

t t + 22487 )
b) Let's confirm you found the correct coordinates for the vertex. Enter them below.
Vertex: ( 33.5 , 33709.5 )
You are almost ready to graph your quadratic model. To use the graphing feature, you will
start by plotting the vertex and then one other point. The easiest other point to use is the h-
intercept (this is just like a y-intercept but your vertical axis in this model is the height, thus it
is an h-axis).
c) To find the h-intercept, you just need to evaluate your function at t = 0 . Do that here:
h(0) = 22487
d) You are ready to graph your quadratic model: h(t) = at + bt + c. It would be tricky to
2
get the vertex and h-intercept in exactly the right place. As long as you get it close, the
program should accept your answer. Give it a try.
36000
35500
35000
34500
34000
33500
33000
32500
32000
31500
31000
30500
30000
29500
29000
28500
28000
27500
27000
26500
26000
25500
25000
24500
24000
23500
23000
22500
22000
21500
21000
20500
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 5
20000
Question 4 0/13 pts 100

Zero Gravity Project

Uploaded by

Copyright:

Available Formats

Zero Gravity Project

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Zero Gravity Project

Uploaded by

Copyright:

Available Formats

4/9/23, 1:22 PM Lumen OHM

Height of a Zero Gravity Parabolic Flight

Question 2 7/7 pts 88-98

Height of a Zero Gravity

a) Enter the solutions to your system here:

b) Use your solutions to form the quadratic model of the flight:

h(t) = −10t2 + 670t + 22487

t max = 33.5 seconds

h max = 33709.5 feet

(t max , h max ) is the vertex of the parabola.

Height of Zero Gravity

a) Let's confirm you have the correct function. Enter it below.

h(t) = ( −10 2 + 670

Vertex: ( 33.5 , 33709.5 )

Question 4 0/13 pts 100

You might also like