Scribd
Upload
481 views

Engineering Graphics and Design LAB Syllabus

The document outlines the course objectives, content, and outcomes of the BCE151/BCE251 Engineering Graphics & Design Lab course. The three main objectives are: 1) To prepare students for effective technical communication, 2) To provide exposure to engineering techniques, skills, and tools, and 3) To prepare students to design systems to meet needs with constraints. The course content covers 5 units: introduction to engineering drawing, projection of planes and solids, sections and development of surfaces, isometric projection, and introduction to computer-aided design using AutoCAD. Upon completion, students will be able to draw projections, explain views and sections of solids, draw isometric projections, demonstrate perspective views using tools, and apply Auto

Uploaded by

harsh dubey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
481 views

Engineering Graphics and Design LAB Syllabus

The document outlines the course objectives, content, and outcomes of the BCE151/BCE251 Engineering Graphics & Design Lab course. The three main objectives are: 1) To prepare students for effective technical communication, 2) To provide exposure to engineering techniques, skills, and tools, and 3) To prepare students to design systems to meet needs with constraints. The course content covers 5 units: introduction to engineering drawing, projection of planes and solids, sections and development of surfaces, isometric projection, and introduction to computer-aided design using AutoCAD. Upon completion, students will be able to draw projections, explain views and sections of solids, draw isometric projections, demonstrate perspective views using tools, and apply Auto

Uploaded by

harsh dubey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BCE151/ BCE251: ENGINEERING GRAPHICS & DESIGN LAB

Course Objectives:
• To prepare the students for the effective technical communication.
• To provide them exposure of techniques, skills, and modern engineering tools necessary for
engineering practice.
• To prepare the students to design a system, component, or process to meet desired needs
within realistic constraints around them in professional life.

Contact
Content
Hours

Unit-1: Introduction to Engineering Drawing and Orthographic Projections 8


Principles of Engineering Graphics and their significance.
Dimensioning, Lettering.
Scales: Plain, Diagonal and Engineering Scales.
Orthographic Projection, Projection of Point, Projection of Lines: Projection of straight lines;
Projection of lines inclined to one plane and both planes.

Unit-2: Projection of Planes and Solids 8


Projection of polygonal surface and circular lamina located in first quadrant inclined to one
or both reference planes.
Classification of solids, Projection of solids like prisms, pyramids, cylinder and cone when
the axis is inclined to one reference plane by change of position method.

Unit-3: Sections of Regular Solids and development of Surfaces 8


Sections of Solids: Right regular solids and Auxiliary views for the true shape of the sections
such as Prism, Cylinder, Pyramid, and Cone.
Development of surfaces for various regular solids such as Prism, Cylinder, Pyramid and
Cone.

Unit-4: Isometric Projection 8

Isometric Projection: Isometric scales, Isometric projections of simple and combination of


solids. Perspective Projection: Orthographic representation of perspective views — Plane
figures and simple solids — Visual Ray Method. Conversion of pictorial view into
orthographic Projection.

Unit-5: Introduction to Computer Aided Design 8

Introduction to AutoCAD: Basic commands for 2D drawing: Line, Circle, Polyline,


Rectangle, Hatch, Fillet, Chamfer, Trim, Extend, Offset, Dim style, etc. Transformation of
Projections: Conversion of Isometric Views to Orthographic Views and Vice-Versa in
AutoCAD. Geometry and topology of engineered components: creation of engineering
models and their presentation in standard 2D blueprint form.

Page 37 of 40
Course Outcome:
After completion, of course students will be able to:
CO 1: Use scales and draw projections of objects.
CO 2: Explain views of solids and their sectional surfaces.
CO 3: Analyze and draw isometric projections of objects.
CO 4: Demonstrate orthographic representation of perspective views using modern tools.
CO 5: Apply AutoCAD software for creation of engineering drawing and models
.

Suggested Text/ Reference Books:


1. Bhatt N.D., Panchal V.M. & Ingle P.R. (2014), Engineering Drawing, Charotar Publishing House.
2. Shah, M.B. & Rana B.C. (2008), Engineering Drawing and Computer Graphics, Pearson Education
3. Agrawal B. & Agrawal C.M. (2012), Engineering Graphics, TMH Publication
4. Engineering Graphics & Design, A.P. Gautam & Pradeep Jain, Khanna Publishing House
5. Narayana, K.L. & P Kannaiah (2008), Text book on Engineering Drawing, Scitech Publishers.
6. (Corresponding set of) CAD Software Theory and User Manuals.

Page 38 of 40

You might also like