Es290 Ip Innovative Voip Phone User Manual: Escene Communication

ES290 IP Innovative
VoIP Phone User Manual
www.escene.ru
Escene Communication
Escene Communication Co.Ltd
INDEX
1. Getting Started ....................................................................................................4
About ...............................................................................................................4
Feature Highlights .............................................................................................4
2. Set up the Phone .................................................................................................5
3. Phone User Interface ............................................................................................6
3.1 Hardware Component Instructions .................................................................6
3.2 Phone Screen Display Features ......................................................................8
3.3 Basic Network Settings .................................................................................9
3.4 SIP Account Settings .................................................................................. 10
3.5 Basic Features ........................................................................................... 11
3.5.1 Making a Call ................................................................................... 11
3.5.2 Anonymous Call ................................................................................ 12
3.5.3 Redial .............................................................................................. 12
3.5.4 Call Log ........................................................................................... 12
3.5.5 Making Calls to Contact ..................................................................... 13
3.5.6 Multi-lines to Answer the Call ............................................................. 13
3.5.7 Auto-Answer .................................................................................... 13
3.5.8 Ending a Call .................................................................................... 14
3.5.9 Using Hold and Recover (Switch Calling Line) ...................................... 14
3.5.10 Transferring Calls ............................................................................ 15
3.5.11 Using Mute ..................................................................................... 15
3.5.12 Do Not Disturb ............................................................................... 16
3.5.13 3-way Conference ........................................................................... 16
3.5.14 Voice Mail....................................................................................... 17
3.6 Advanced Settings ..................................................................................... 17
3.6.1 Using the phone book ....................................................................... 17
3.6.2 Using Call Logs ................................................................................. 20
3.6.3 Peer-to-Peer ..................................................................................... 21
3.7 Keypad Setting .......................................................................................... 21
3.7.1 Language Setting .............................................................................. 21
3.7.2 Message........................................................................................... 22
3.7.3 Time & Date ..................................................................................... 22
3.7.4 Ring Tone and Volume Setting ............................................................ 23
3.7.5 Searching Phone Book ....................................................................... 23
3.7.6 Cannot Set the Features with Keypad .................................................. 23
4. WEB User Interface ............................................................................................ 24
www.escene.ru
Main Interface-Phone Status ............................................................................. 24
4.1 Net Work .................................................................................................. 25
4.1.1 LAN Port .......................................................................................... 25
4.1.2 PC Port ............................................................................................ 27
4.1.3 Advanced ......................................................................................... 28
5 SIP Account ........................................................................................................ 29
5.1Basic ......................................................................................................... 29
5.2 Call........................................................................................................... 30
5.3 Security .................................................................................................... 31
6 Phone Setting ..................................................................................................... 32
6.1 Basic ........................................................................................................ 32
6.1.1 Time Settings ................................................................................... 33
6.1.2 Call ................................................................................................. 34
6.1.3 VoIP Call Forward ............................................................................. 35
6.1.4 QoS................................................................................................. 36
6.2 Advanced .................................................................................................. 36
6.2 .0 Audio ............................................................................................. 36
6.3 Line Keys ............................................................................................ 38
6.4 Function Keys ..................................................................................... 39
6.5 Soft Key ............................................................................................. 40
6.6 Dial Plan ............................................................................................. 40
6.7 IP Strategy ......................................................................................... 41
7 Phone Book ........................................................................................................ 42
7.1 Group ....................................................................................................... 42
7.2 Contact ..................................................................................................... 42
7.3 LDAP ........................................................................................................ 43
7.4 Ban List..................................................................................................... 44
8 Phone Maintenance ............................................................................................. 45
8.1 Basic ........................................................................................................ 45
8.1.1 HTTP Upgrade .................................................................................. 45
8.1.2 FTP Upgrade .................................................................................... 46
8.1.3 TFTP Upgrade .................................................................................. 47
8.1.4 Default Setting ................................................................................. 48
8.1.5 Reboot ............................................................................................ 48
8.2 Advanced .................................................................................................. 48
8.2.1 Log ................................................................................................. 48
8.2.2 Auto Provision .................................................................................. 49
9 Password............................................................................................................ 50
10 WEB Other Settings or Information - Appendix ..................................................... 50
10.1 WEB User ................................................................................................ 50
10.2 Multi-Language ........................................................................................ 51
10.3 Note Tips ................................................................................................ 51
www.escene.ru
1. Getting Started
About
Escene ES290 is a highly innovative based VoIP phone, It can perfectly satisfy all kinds of
businessmen's communications. ES290 integrates with 128x64 pixel graphic LCD, a large resolution
display, elegant and intuitionist user interface, which you can perfectly experience.ES290 delivers HD
audio quality with HD handset, HD speaker and HD codec (G.722), it rich features can effectively improve
the communications in working. ES290 quite meets the demands of SMEs, Home Office and ISP
applications.
Feature Highlights
a) Multi-Language
The LCD display supports Multi-Language.
b) HD Voice
Special voice processing technology, high-fidelity voice quality, HD encoding, HD
Handset, ensure clear, realistic smooth communication.
c) Senior Calling Ability
2 lines with double color(GREEN & RED) LEDs, Synchronously control or manage
2 calls, Call queue, Switch between lines. Multi-parties conference, call transfer.
d) All kinds of Phone Book
It supports XML Personal Phone Book\LDAP\Enterprise Phone Book etc. This
feature satisfies customer's phone book requirements.
e) Support HTTP\TFTP\FTP\Auto-Provision.
f) Support POE(Remark: ES290-PN) / Power Adapter / USB (Standard DC
5V).
g) 2-angle adjustable bracket, wall-mountable
www.escene.ru
2. Set up the Phone
a) Packing List:
Check the packing list before installation, if you find anything missing, contact your
system administrator.
 1*ES290 IP Phone
 1*Handset
 1* Handset Cord
 1*Ethernet Cable
 1*Phone Bracket
 1*Quick Setup Guide
 1*Manufacturer Certification
b) Phone Installation:
This section introduces how to install the phone with the components in the packing
list:
 Attach the Bracket
 Connect the Handset and optional Headset
 Connect the Network and Power
Attach the Bracket

Pls follow the following step "a" to "b", firstly let the part 1 of the bracket join to the
phone, and then let the part 2 of the bracket join to the lower holder.
Connect the Handset and optional Headset
www.escene.ru
Connect the Network and Power
You have two options for power supply. Your system administrator will advise you which
one to use.
 AC power adapter
 POE(Power over Ethernet) IEEE802.3af
 USB(Standard DC 5V)
NOTES：Pls make sure your phone support POE feature. You can check the
label on the back of the phone , for example "Model: ES290-PN Rev:2.1.0",
the P means it support POE feature.
Note: If POE works, the phone doesn't need to connect to the AC power adapter. Make
sure the Ethernet cable and switch/hub is POE compliant.
3. Phone User Interface
3.1 Hardware Component Instructions
The main hardware components of the ES290 IP Phone are the LCD screen and the
keypad.
www.escene.ru
Hardware component instructions of the ES290 IP Phone are:
ITEM DESCRIPTION
1 LCD Screen Displayed information about calls, messages, soft keys, time, date
and other relevant data:
• Call information — caller ID, call duration
• Icons (e.g. )
• Missed calls or second incoming caller's information
•Time and date
2 Light Status Red-Flashing: There is an incoming call or be Hold.
Red-Steady: Hook-off. or be in an usual conversation
3 Line Key Green-Steady: There is a conversation making on the line
Red-Flashing: There is call coming in
Green-Flashing: The line is on hold
Dark: Accounts are idle
4 Soft Key Labels automatically to identity their context-sensitive features
5 OK Key Confirm the action
6 Navigation Key Scroll through the displayed information, and in the idle feature:
UP: Open the "All CONTACT LOG"
DOWN: Open the "MISSED CALL"
RIGHT: Open the "RECEIVED CALL"
LEFT: Open the "DAIL CALL"
7 C Key Cancels actions or rejects an incoming call, and the other feature:
www.escene.ru
In the idle: Open the "Phone Status".
Diagnosis: Press and hold 3 second to open "Hardware Diagnosis".
MUTE: "MUTE" feature is enabled if you press it while the
conversation making on the phone.
8 Functions Key Conference\Redial\Transfer\Hold
9 Speaker Key Toggles the hands-free speaker phone mode.
10 Keypad Provides the digits, letters and special characters in
context-sensitive applications.
11 Headset Key Toggles and indicates the headset mode.
12 Message Key Indicates and accesses voice messages.
13 Volume Key Adjusts the volume of the handset, headset, speaker and ringer
3.2 Phone Screen Display Features
If the phone has successfully started up and after using, the idle LCD display will show
information as below:
ITEM DESCRIPTION
1 TIME & DATE TIME & DATE display in the middle of the screen.
2 Auto-Answer icon Enable this feature, it will display "AA" at the top right corner.
3 Missed Call Missed Call under the TIME in the middle of screen
4 Line Status There are four status as below:
a. :Disconnect the network
b. :Account failed to register
c. :Account successfully registered
d. :Account successfully registered and DND feature is

enabled. The DND icon also will display at the top right corner.
5 Soft Key Area Labels automatically to identity their context-sensitive features
6 Screen Top Icon The Screen Top Icon from left to right is:
: Handset Hand on status
www.escene.ru
:Speaker Hand on status
:Headset Hand on status
:Call MUTE
:Missed Call
:Call Forward
:Text Message
:Keypad Lock
:Network is unavailable
3.3 Basic Network Settings
The phone supports Three Modes of Network Setting. Include PPPoE\Static IP\DHCP.
DHCP Setting
Feature Operating Steps
DHCP Press OK or MENU> System Settings> Advanced Settings>
Password(Default is Empty)> Network> LAN Port
 Press LAN Port to login in to the menu
 Select "DHCP" mode
 Press "Enter" key
 Set the DNS\web port\telnet port
 Press "Save" key to make it work
 Tips "Network is changed, press OK reboot "
Static IP Setting
Static IP Press OK or MENU> System Settings> Advanced Settings>
 Select "Static" mode
 Set the IP\Mask\GW\DNS\web port\telnet port
www.escene.ru
PPPoE Setting
PPPoE Press OK or MENU> System Settings> Advanced Settings>
 Select "PPPoE" mode
 Set the User Name\Password\web port\telnet port
3.4 SIP Account Settings
ES290 IP phone makes calls based on sip accounts, It can support Single account or
Multi-account, Each account can be configured to the different SIP server.
If you want to… Then...
Create an SIP --1) Select “System setting” > “Advanced setting”；
account --2) Enter the password required（The default is empty) ；
--3) Select “SIP” > “Account sip”；
--4) Select one of the account you want to setting, you can
configure the following parameters
-Enable account*: Select Enable
-Number of lines: Default is 2
-Description: description of this account
-Display Name: The name displayed on the screen
-Authentication user: the Authenticated users are matched
with the SIP server.(The default With the same account)
-Account*: the account matches with the SIP
server.(extension number)
-User pass word*: the user password matches with the SIP
server
-SIP Server*: The primary SIP server, all calls through this
www.escene.ru
server
-Out Bound Server: The out bound SIP server

-STUN Type: Enable/Disable STUN feature
-STUN: Input STUN URL
-Auto Answer: Enable/Disable this account auto answer feature
* Note: When you finish the setting, you can press Save to make it
work, and then you can see the status icon in the LCD idle.
The parameters with the * mark must be set.
Disable sip account --1) Select “System setting” > “Advanced setting”；
--2) Enter the password required（The default is empty) ；
--3) Select “SIP” > “Account sip”；
--4) Select “Enable account” > “Disable”；
--5) Select “Save” to saves settings
3.5 Basic Features
3.5.1 Making a Call
Here are some easy ways to place a call on SayHi IP Phone:

If you want Then…
to...
Place a call using Pick up the handset --1) You can hear dial tone;
--2) Enter a number；
the handset --3) Press # button (default)，
Place a call using Press Speaker button -or wait 5s (default), then it send the
number automatically.
a speakerphone
Place a call using Put on your headset,
a headset active Headset button
so that the status light is
Red , and then do as
using speakerphone
www.escene.ru
3.5.2 Anonymous Call
You can use anonymous call feature to block the identity and phone number from showing
up to the called party when you call someone. E.g, you want to call to consult some of the
services, but you don't want to be harassed.
Enable Anonymous Call Press OK or MENU> Function Setting> Anonymous
--Press Enter or OK button ,
-You can select which Account want to use, enable/disable
this feature and enable/disable reject anonymous
3.5.3 Redial
To redial the last placed call from your phone

Redial --Press REDIAL button to dial the last number
-or press Navigation button-Left > “Dialed number”, select
a number, and press
3.5.4 Call Log
Dial from a call log --1) Press MENU or OK button > “Call history”, you can select
"All Calls", “Missed calls”, “Received calls” and “Dialed
numbers”,
- or press Navigation button (in Standby interface) > select
"All Calls"(up) “Missed calls”(down), “Received calls”(left)
and “Dialed numbers” (right)
--2) Then press button.
NOTE: You also can press the "log" to login this menu
when in the idle.
www.escene.ru
3.5.5 Making Calls to Contact
You can also dial a contact from the Personal Phone Book.
Placing Calls to --1) Press MENU or OK button > “Phone Book”, you can select
Contacts
"Personal Phone Book", “Enterprise Phone Book”, “LDAP”
and “Black List”,
- or press Navigation button (in Standby interface) > select
the desired contact.
--2) Then press button.
NOTE: You also can press the "DIR" to login this menu
when in the idle.
3.5.6 Multi-lines to Answer the Call
Multi-lines to Answer --1) Another Line button is Red and flashing, Light strip is
the Call
Red and flashing;
--2) Press the flashing Line button to answer (at this time,
the original call will be hold.)
3.5.7 Auto-Answer
You can set the phone and let it auto-answer the coming call.
Auto-Answer the --1) Enable the Auto-Answer feature.
Coming Call
--2) Auto-Answer mode you can set in the MENU>Function
Setting> Auto Answer >Device
 Speaker
 Handset
 Headset
When you use the Handset mode, at this time you need to hands
www.escene.ru
up the handset and then it can work at this status.
--3)Filter Groups
Auto-answer the coming call in this special groups.
3.5.8 Ending a Call
To end a call, hang up. Here are some more details.

Hang up while using the --Return the handset to its cradle,
Handset -or press End
Hang up while using the --Press Speaker button that is Red ,
Speakerphone -or press Line button for the appropriate line,
-or press End
Hang up while using the --Press Handset button, （Do not keep the headset mode) ,
Headset -or press End (keep the headset mode)
Hang up one call, but --Press End,
preserve another call on -or refer to the above three methods
the other line
3.5.9 Using Hold and Recover (Switch Calling Line)
You can hold and resume calls. You can take a call in one line at anytime, and the other
lines would be hold. As a result of that, you can switch different calling line on our phone.
If you want to... Then...
Put a call on hold --Press HOLD button,
-or press soft key
Hold a line and switch to Press another Line button for the appropriate line
another line
Resume a call on current --Press Line button,
www.escene.ru
line
Release a call on Select the line want to release hold, press the line, so
different line recovery;

NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow-green and flashing Line button or Hold in the
LCD.
3.5.10 Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer
the call.
Talk to the transfer --1) Press TRANSFER button or press XFER;
recipient before --2) Enter number;
transferring a call --3) press “#”（default) ,

-or press then transfer the call,
(consult transfer)
-or wait five seconds(default)then transfer the call
Transferred to idle --1) Press TRANSFER button or XFER；
lines or other
--2) Press ;
numbers without
--3) Enter number;
talking to the --4) Press “#”（default)
transfer recipient -or press , then transfer the call;
-or wait five seconds(default)then transfer the call
(Blind transfer)
Blind transfer to the --1) Press TRANSFER button or press XFER;
held line --2) Press the Line button of held line
3.5.11 Using Mute
With Mute enabled, you can hear other parties on a call but they cannot hear you. You can
use mute in conjunction with the handset, speakerphone, or a headset。
Toggle Mute on Press C button, then the screen top and left will have a MUTE
icon
www.escene.ru
Toggle Mute off Press C button again, then the button light off
3.5.12 Do Not Disturb
You can use the Do Not Disturb(DND) feature to block incoming calls on your phone with a
busy tone（Can also be set to their voice mail or other extension numbers, etc.).
Enable global DND --1) Press DND;
--2) All enabled line on the phone would changes to status.
and the icon is .
Enable DND on a Press MENU or OK button > “Function setting” > “DND” >
single line (select line) “Enable”
Disable DND --Global DND enabled, press to disable global DND;
--Line DND enabled, press twice ,
-or press MENU or OK button > “Function setting” >
“DND” >(select line) “Disable”
3.5.13 3-way Conference
You can enable a three-party conference, during the conversation three phone parties can
communicate with every party.
If you want to... Then...
Invite the transfer --1) When the transfer recipient answer the call, press
recipient into a CONFERCENCE button or "CONF" on your phone;
conference in a --2) Then the held one, transfer recipient and you will be into a
transferring
conference, and the LCD will display
status.
Invite the third party --1) Press "CONFERENCE" button or "CONF" in an active call;
into a conference in --2) Enter the third party number；
a active call --3) After connected the third party, press "CONFERENCE"
button or "CONF" again
www.escene.ru
establish a --1) when one phone line is holding on and the other line is
conference with held busy;
line --2) Press "CONFERENCE" button,
-or Press "CONF" Soft key
--3)Press the held line's programmable button, the 3-way
Conference is enable.
3.5.14 Voice Mail
When the Phone get a voice mail from server. it will light up the voice mail button .
Voice Mail --1 ） Press the Voice Mail button(There has Voice Mail icon
,without is )
--2）Enter the User Password
--3）It will login into the voice mail server. You need to follow the
IVR to do it.
3.6 Advanced Settings
3.6.1 Using the phone book
Enterprise Phone Book
Search the --1) Press DIR in the idle status,
Contacts from -or press "MENU" or "OK" button > “Phone book”>“Enterprise
Enterprise Phone Phone Book”,
Book --2) Select “Enterprise Phone Book”, press "OK" button;
--3) Press "Find" and input the name who you want to search.
Call the Contact --1) Press "DIR" in the idle,
from Enterprise -or press "MENU" or "OK" button > “Phone book”>“Enterprise
Phone Book Phone Book”,
--2) Select “Enterprise Phone Book”, press "OK" button;
www.escene.ru
--3) Press "Find" and input the name who you want to search.
--4) When you search the person, you can dial it.
Personal Phone Book
Add Contacts --1) Press Phone Book,
-or press "MENU" button > “Phone book”>“Personal phone
book>View All”,
-or press "OK" button > “Phone book”>“Personal phone
book>View All”;
--2) Select “Add contact”, press "OK" button;
--3) Use the navigation keys to select content, press "OK" button
to set and modify:
-Name: set the name of contact,
-Office Number: Setting the contact Office Number
-Mobile Phone Number: Setting the contact Mobile Phone
Number
-Others Number: Setting the contact Others Number
-SIP Account: Setting the contact call SIP account
-Group: the contacts be divided into different user’s groups
--4) Press "Save" soft key to complete
Add group --1) Press "DIR" soft key,
book>View All”,
book>View All”;
--2) Select the “add group” then press OK button;
--3) Use the navigation keys to select content, press OK button
www.escene.ru
to set and modify:
-Group name: name of the group
--4) Press "Save "soft key to complete
Modify group --1) Press "DIR" soft key,
book>View All”,
book>View All”;
--2) Select the “Modify group” then press "OK" button ;
--3) Select the group you want to modify, press the "OK" button
to set and modify, press "Save" to save the change
Delete group --1) Press "DIR" soft key,
book>View All”,
book>View All”;
--2) Select the “Delete group” or OK button；
--3) Select a group you want to delete, press OK button
LDAP
Search the --1) Press "DIR" in the idle,
Contacts from -or press "MENU" or OK "button" > “Phone book”>“LDAP”,
LDAP --2) Select “LDAP”, press "OK" button;
--3) Press "Find" and input the name or number who you want to
find search from the LDAP server.
Call the Contact --1) Press "DIR" in the idle,
from LDAP -or press "MENU" or "OK" button > “Phone book”>“LDAP”,
www.escene.ru
--2) Select “LDAP”, press "OK" button;
--3) Press "Find" and input the name or number who you want to
find from the LDAP server.
--4) When you search the person, you can dial it.
Black List
Add the Contacts --1) Press "DIR" in the idle,
-or press "MENU" or "OK" button > “Phone book”>“Black
List”,
--2) Select “Black List”, press "OK" button;
--3) Press "Add" and input the name\office number\mobile
number\other number\SIP account who what you want to add
into the Black List.
View the Contact --1) Press "DIR" in the idle,
from Black List -or press "MENU" or "OK" button > “Phone book”>“Black
List”,
--2) Select “Black List”, press "OK" button;
--3) Press "RUN" to view someone who what you want to find.
--4)If you want to move or change it, you can follow the RUN to
do.
3.6.2 Using Call Logs
Your phone maintains records of your missed, placed, and received calls.
View call logs --1) Press "MENU" or "LOG" button > “All Call” > “Missed
Calls”, “Received Calls”, or “Dialed numbers”
--2) Use the navigation keys to view the call record information.
Delete/Save Call --1) Login in to the Call Logs
www.escene.ru
Logs --2) Use the navigation keys to view the call record or select DEL
key.
--3) Use the navigation keys to view the call record or select Save
key.
3.6.3 Peer-to-Peer
When all of the phone accounts were disable or not register. it will be show this mode in
the idle. It can use by when the new workstation isn't have SIP server.
Peer-to-Peer Disable all of accounts or not register.
Make Call with --1）Press OK or MENU button> System Setting> Advanced Setting>
Peer-to-Peer SIP Account；
--2）Disable all of accounts or un-register；
--3）Turn back the phone idle, you can call someone use IP address.
3.7 Keypad Setting
SayHi series IP Phone can through two ways configuration it, one is setting in MENU,
another is setting in website. Here just description in MENU.
NOTES: When you want to input the IP address like ".", it was replaced by the "*".
3.7.1 Language Setting
ES290 IP Phone support Multi-Language setting, as below is an example.

Switch the Language --1）Press OK or MENU button> System Setting> Phone Setting>
between Chinese and Language
English --2）Here you can select
English\French\Italian\Polish\Protuguese\Runssian\Spanish\
Turkish\Chinese
--3) After you finish select, press Save to make it work.
www.escene.ru
3.7.2 Message
ES290 have Message feature. It will display in the LCD when it has a New Message.
Create a --1）Press OK or MENU button；
--2）Select "Messaging"
Message --3）Voice Message: Setting the Voice Message code in here.
Text Message: Write down the Text Message in here.
--4）Select Text Message> New Message.
--5）Input the receiver and write down message body, and then
press send to finish.
Message Inbox --1）Select Message Inbox.
--2）Select which one you want to check.
--3）You can press Enter to read or press Del to delete.
3.7.3 Time & Date
SNTP --1）Press OK or MENU button；

--2）Press OK or MENU button> System Setting> Phone Setting> Time &
Date> Time and Date setting> SNTP
--3）SNTP
-Time Zone：Setting the time zone
-NTP Server 1：NTP server address 1
-NTP Server 2：NTP server address 2
-DayLight：Enable/Disable Day Light
SIP Server --1）Press OK or MENU button；

Date> Time and Date setting>SIP Server
--3）Press Save to make it work
Manual Press OK or MENU button；
Setting Date> Time and Date setting> Manual Setting
--3）Manual Setting
- Manual Setting: Year\Month\Days\Hours\Minutes\Seconds
Time Display --1）Press OK or MENU button；
Format Date> Time Display Format
--3）Time Mode: 24hour\12hour
Date mode:
DDMMWWW\MMDDWWW\WWWDDMMM\DDMMMYY\YYYYMMDD\DD
MMYYYY\MMDDYY\DDMMMYYYY\WWWDDMMM etc.
www.escene.ru
3.7.4 Ring Tone and Volume Setting
Ring Type --1）Press OK or MENU button；

--2）Press OK or MENU button> System Setting> Phone Setting>Ring
Type
--3）Select the ring type from 1 to 8 or custom ring, and then press Save
to make it work.
Volume --1）Press OK or MENU button；
--2）Press OK or MENU button> System Setting> Phone Setting> Volume
Setting Setting
--3）Volume Setting: Handset\Speaker\Headset\Ring volume
--4) Press Enter to adjust the volume and press Save to make it work
NOTES: For the Custom Ring Type you need to upload it from website.
3.7.5 Searching Phone Book
Accurate Search --1）Press MENU or OK button > “Function Setting”, you can select
" Accurate Search "
--2) Then press Enable/Disable and Save.
--3) When you back to idle, you can use the digital keypad to search
the contact.
T9 Search --1) Press MENU or OK button > “Function Setting”, you can select
" T9 search"
--2) Then press Enable/Disable and Save.

--3) When you back to idle, you can use the digital keypad to search
the contact.
NOTES: The Search Phone Book setting default is Accurate Search.
3.7.6 Cannot Set the Features with Keypad
As below features are cannot setting with the keypad:

1) Dial Plan.
2) Custom Ring Type
3) SNTP Server and Time & Date
4) Update the Firmware or Backup.
www.escene.ru
4. WEB User Interface
In addition to the phone user interface, you can also customize your phone via web user
interface. In order to access the web user interface, you need to know the IP address of
your new phone. To obtain the IP address, press the C key on the phone. Enter the IP
address (e.g. HTTP://192.168.0.10 or 192.168.0.10) in the address bar of web browser on
your PC. The default user name is root (case-sensitive) and the password is root
(case-sensitive).
Main Interface-Phone Status
Here you can see as below information: System Run Time, Register Status, Network
Status, System Information,
ITEM DESCRIPTION
System Run Time The phone system normal running time.
Register Status The status with Account 1~3.
Network Status The status with LAN, MAC, LAN IP, Net mask, Gateway, Primary
DNS, Secondary DNS, VPN IP, PC IP, PC Net mask, Device Type,
DHCP Server.
System Information The status with Phone Model, Software Version, Hardware
Version, Hardware ID, Kernel Version, Auto-Provision Server URL,
www.escene.ru
TFTP Server IP.
4.1 Net Work
4.1.1 LAN Port
Basic
ITEM DESCRIPTION
Network Connection Mode Network Connection Mode has DHCP, Static IP, PPPoE.
DNS Settings Select the DNS mode that you want.
www.escene.ru
Advanced
ITEM DESCRIPTION
Port Management Settings
HTTP Port The default web port is 80,if you want to change it(for
example change it to88),
You must input IP and Web port to login the web page(for
example HTTP://192.168.0.200:88). It will take effect on
next reboot.
Telnet Port The default Telnet port is 23,if you want to change it(for
example change it to 2003). You must input IP and Telnet
port to login the manage page (for example telnet
192.168.0.200:2003).It will take effect on next reboot.
www.escene.ru
Socket5 Proxy Server
Socket5 Proxy Server Enable/Disable Socket5 Proxy Server.
Server IP Socket5 Proxy Server IP address.
Port Socket5 Proxy Server port, default is 1080.
Anonymous Login Enable/Disable Socket5 Proxy Server login username.
Paging Setting(NOTE: This feature priority is followed the serial number, In
other words, "paging 1" is the highest priority)
Paging1 Enable/Disable Paging feature.
Group IP and Port Group IP and Port with Paging.
4.1.2 PC Port
Normally choose Bridge, if you choose Router ,you need to input router IP address ,net
mask.
Bridge
Normally, you should choose “bridge” feature, it means that pc port and LAN port will share
the same network.
Router
Router feature is for the phone PC Port. You must input IP address (it’s equivalent to a
gateway) and Net mask. If you want to use DHCP function, please turn it on, input start IP
and end IP.
www.escene.ru
4.1.3 Advanced
VPN Setting
When using VPN Setting option, you can set several parameters as follow:
VLAN Setting
Enable VPN You can enable/disable VPN for phone and pc.
VPN Type: Choose the appropriate type of VPN.
VPN Server Addr VPN server's IP.
VPN User Name VPN user's name
VPN Password A password be used for authentication
VLAN Setting
When using VLAN Setting option, you can set several parameters as follow:
VLAN Setting
Enable VLAN You can enable/disable vlan for phone and pc
VID The vlan ID you want the phone or pc to join
[LAN/PC Port]
www.escene.ru
5 SIP Account
5.1Basic
Choose one Account, you will find the following parameters:

ITEM DECSRIPTIO
Enable N
You can choose on/off to enable/disable the line.
Account Mode You can choose VOIP/PSTN, but this model nonsupport PSTN, If you
need, Pls contact us to buy another model that can supports PSTN.
Amount Of Line The line key of account used, default is 2
Account Used
Display Name It is showed as Caller ID when making a phone call
www.escene.ru
Username It is a username provided by SIP Server
Authenticate Name It is authenticated ID for authentication
Password It is a password provided by SIP Server
Label Label with this account.
SIP Server Server for registration, provided by administrator
Secondary server When the main server can't work, it also can register in this
secondary server.
Outbound Proxy Put into the address with the outbound proxy server.
Server
Secondary Outbound When the main out bound server can't work, it also can use this
Proxy Server secondary server.
Poling Interval Time Poling Interval Time Of Registration, default is 32 s.
Of
Registration
NAT Traversal Defines the STUN server will be active or not
STUN Server Session traversal utilities for NAT.
BLA Share with the line.
BLA Number BLA Number
Subscribe Period Subscribe expire time.
Register Expire Time IP phone automatically registered every time

SIP Transport There are UDP/TCP/TLS three options
Ring Type Select this account ringing type.
5.2 Call
www.escene.ru
ITEM DECSRIPTIO
Call N
Do Not Disturb Enable/Disable Do Not Disturb
Anonymous Call Enable/Disable anonymous call.
Anonymous Call Enable/Disable anonymous call rejection.
Rejection
Use Session Timer Enable/Disable refresh session function. The device will send an Invite
packet to refresh the session during a call if it enable.
Session Timer The refresh session time interval.
Call Method This method include SIP and TEL.
DNS-SRV Enable/Disable DNS-SRV.
Allow-events Enable/Disable Allow-events.
Registered NAT Enable/Disable Registered to NAT
UDP Keep-alive The phone periodically sends a UDP packet to keep the port active
Message and to avoid the server to shut down the port
UDP Keep-alive Default is 30 second.
Interval
5.3 Security
ITEM DECSRIPTIO
Security N
SIP Encryption Enable/Disable SIP encryption.
RTP Encryption Enable/Disable RTP encryption.
Encryption Algorithm The encryption algorithm at this time we only have RC4.
Encryption Key The key with encryption.
www.escene.ru
6 Phone Setting
6.1 Basic
ITEM DECSRIPTIO
Basic N
Back Light The backlight of the phone LCD.
Keyboard Lock Enable/Disable keyboard lock, you can lock: MENU Key, FUNCTION
Key., ALL Keys, LOCK all keys but auto Answer.
Hot Line function When you pick up the handset, it will dial out with the hot number.
Hot Number Input the number what you want to.
Auto Answer Auto-answer the coming call, it also can filter a contact group.
Auto Answer Mode Auto-answer the coming call, it also can filter a device to answer.
Call Waiting When there's coming a call or the phone is talking, the second call
will be in the queue.
Call Waiting Tone Select the frequency with the tone when call waiting.
DTMF The DTMF transmitted mode, include RFC2833,Inband,SIP Info, Auto
Fuzzy Search Fuzzy search someone with the phone book in the idle.
Phone Book Search Enable/Disable the phone book search feature with accurate or T9
mode.
Call List Save You can choose to save the call list into the phone or not.
Network Packet When select on, then you can capture the phone’s packet use
Mirroring notebook which connect to pc port of the phone
www.escene.ru
6.1.1 Time Settings
ITEM DECSRIPTIO
Time Settings N
Set Time Mode Include SNTP/SIP Server/PSTN/Manual
SNTP Server You can select in the list or input owner server address.
Update Interval The update interval with SNTP.
Day Light Saving Time Enable/disable the DST for the phone
Time Format You can use 24 hour time format or 12 hour time format
Date Format You can choose the appropriate time format.
Time Zone-GMT You can select different time zone for the phone
Manual Setting Setting time manually.
www.escene.ru
6.1.2 Call
ITEM DECSRIPTI
Call ON
Pickup Function When you are not in the position, others can help you to answer.
Pickup Code Fill in server's pickup code.
Message The code with voice message.
Booking Voice Mail Open this feature, the phone light(Message) will be bright when it
get message.
Play Voice Mail Tone Open this feature, it will be ringing when it get message.
Miss Call Display Turn on or off the display with Miss call in the phone LCD.
www.escene.ru
DND Soft key Enable/Disable the DND feature.
Play Hang-up Tone The tone with hang up in busy.
Transfer Code The code with transfer.
Conference Exit Result Conference originator hang up the phone, hang up two ways of it.
Return Code When Select the code feedback to the server when you reject the call.
Refuse
Return Code When DND Select the code feedback to the server when you open DND
function.
Flash Hook The time with the flash hook.
Time(<800ms)
Called No Answer Time When it has coming call and enable this feature, the caller will be
request time out in the stipulated time.
Pound Send Method When you to use the code, such as: #28#123 or %23123, you
need to set this feature.
RFC 2833 Play Load Default is 101, RTP Payload for DTMF Digits, Telephony Tones and
Telephony Signals
P-Asserted-Identity Enable/Disable the P-Asserted-Identity feature.
SIP Session Timer T1 The SIP Session Timer setting.
Local SIP Port The port range setting with SIP, default is 5060.
RTP Port Range The port range with RTP
Affiliated Port Enable/Disable the affiliated port feature.
Headset Mode Select headset mode with normal or seat.
Ring Type On Seat Select ring type mode with headset or speaker.
Mode
6.1.3 VoIP Call Forward
ITEM DECSRIPTIO
Always N
All ways transfer the call to others.
www.escene.ru
If Busy If the phone was busy working, the call will be transfer to others.
If No Answer If the phone was no answer, the call will be transfer to others.
Ring Frequency The ring frequency with the VOIP Call Forward.
6.1.4 QoS
ITEM DECSRIPTIO
SIP QoS The range is 0~63,default is 26 N
Voice QoS The range is 0~63,default is 46
6.2 Advanced
6.2 .0 Audio
6.2.1 Basic
ITEM DECSRIPTIO
Basic N
Select Country Select the country dial tone. Default is United States.
www.escene.ru
Ring Volume The ring volume default is Lv3, the range is 0~9.
Handset Volume The handset volume default is Lv5, the range is 1~9.
Speaker Phone The speaker volume default is Lv5, the range is 1~9.
Volume
Headset Volume The headset volume default is Lv3, the range is 1~9.
Handset MIC Volume The handset MIC volume default is Lv3, the range is 1~7.
Speaker Phone MIC The speaker MIC volume default is Lv3, the range is 1~7
Volume
Headset MIC Volume The headset MIC volume default is Lv3, the range is 1~7
6.2.2 Advanced
ITEM DECSRIPTIO
Ring N
Ring Type Select the ring type. Default is Ring 1.
Uploading Ring Tone Please upload a ring tone with G711A audio coding, Maximum 10
rings and the total sizes must less than 150k.
www.escene.ru
Audio Codec Use the navigation keys to highlight the desired one in the
Enabled/Disable Codes list, and press the / to move to

the other list.
Jitter Buffer
Type The type of Jitter Buffer is Adaptive or Fixed, default is adaptive.
Min Delay The min delay range setting , default is 60.
Max Delay The max delay range setting , default is 150.
Normal Delay The normal delay range setting , default is 120.
Other
Play Load Length The play load length setting, default is 30ms.
High Rate Of G723.1 Enable/Disable High Rate of G723.1 feature.
VAD Enable/Disable VAD feature.
Echo Suppression Enable/Disable Echo Suppression Mode feature.
Mode
Side Tone Enable/Disable Side Tone feature.
6.3 Line Keys
ITEMS DESCRIBES
Line The default value.
Speed Dial You can use this key feature to speed up dialing the numbers often used
or hard to remember.
Speed Dial You can use this key feature to speed up dial a call with a specified prefix
Prefix number.
www.escene.ru
DTMF You can use this key feature to send the specification of arbitrary key
sequences via DTMF.
BLF You can use the BLF feature to monitor a specific user for status changes
on the phone.
Paging You can use multicast paging to quickly and easily forward time sensitive
announcements out to people within the multicast group.
Call Park You can use call park feature to place a call on hold, and then retrieve
the call from another phone in the system (for example, a phone in
another office or conference room).
Intercom You can press the configured intercom key to automatically connect with
a remote extension for outgoing intercom calls, and the remote
extension will automatically answer the incoming intercom calls
BLA This feature such as the BLF.
NOTE: ONLY WHEN YOU CHOOSE “SPEED DIAL”, THE RIGHT OF “NAME”,”NUMBER” WILL
TAKE EFFECT.
6.4 Function Keys
Function Keys: If you do not like the default setting with the function keys feature. You can
change to whatever you like.
NOTE: IF THE PHONE WITHOUT THE KEY, YOU CAN IGNORE IT.
www.escene.ru
6.5 Soft Key
Soft Keys: Soft key is the key with below display in the LCD. You can change it for your
mind to the other features in many all kinds of status. As below example, when you dialing
with someone, the LCD display soft key is Send \Del \Empty\End, Empty means nothing in
it.
6.6 Dial Plan
If you want to setup a dial plan, you can click "Dial Plan"
ITEM DECSRIPTIO
Send Key Select the default send key modeNyou want to use.
Dial Length Enable this feature will limit the dial length. Default is 25.
No Dial Timeout Setting the range with no dial timeout, default is 5.
Dial Rule Select the Add Rule button to add dial rule, pls see as below detail.
www.escene.ru
ITEM DECSRIPTIO
ID Dial Plan ID N
IP The ip of a phone which you want to call
Description Description with this dial rule.
Port Setting the Port with this dial rule, default is 5060.
Prefix The number which you need to press actually if you want to call the
phone
Called Insert Number There have two option, Enable or Disable.
Position Which position you want insert the number
Number Which number you want to insert
Called Delete Number There have two option, Enable or Disable.
NOTES: If you want to know more detail about Dial Rule, pls find it in the
official website to download the specific document.
HTTP://www.escene.cn/en.
6.7 IP Strategy
You can use IP Strategy feature to make a list which can be set to only allow the incoming
call on the list.
e.g. As following picture you can see it has 192.168.0.248 in the list. When you open this
feature. It means you just allow come from this IP address meeting
www.escene.ru
7 Phone Book
The phone book including Group, Contact, LDAP and Ban list, please review the following
for more details:
7.1 Group
You can add, edit and delete group in a phone book on this web page.
If you want to add a Group, you just ought to click ‘Add Group’ .
You can edit an existed Group by click .
You can delete an existed Group by click , if you want to delete all Groups, you just
ought to click ’Delete All Group’.
7.2 Contact
You can add, edit and delete contact in a phone book on this web page .
The phonebook can storage 300 contacts entry
www.escene.ru
If you want to add a Contact, you just ought to click ‘Add Contact’ .
You can edit an existed Contact by click .
You can delete an existed Contact by click , if you want to delete all Contacts, you just
ought to click ’Delete All Contact’.
You can edit or move this contact to Ban List after you select .
You can download and save this contact to PC after you select .
7.3 LDAP
NOTES: If you want to know more detail about LDAP, pls find it in the office
website to download the specific document. HTTP://www.escene.cn/en. As
below figure is an example.
e.g.
LDAP Name Filter:(sn=%s)
LDAP Number Filter:(telephoneNumber=%s)
Server Address:192.168.0.65
BASE:DC=ldap,DC=escene,DC=com
User Name：[email protected]
Pass Word：escene_2012
LDAP Name Attributes 1:sn
LDAP Name Attributes 2:cn
LDAP Number Attributes 1:telephoneNumber
www.escene.ru
7.4 Ban List
You can add, edit and delete contact in a Ban List on this web page .
www.escene.ru
If you want to add a Ban List, you just ought to click ‘Add Ban List’.
You can edit an existed Ban List by click .
You can delete an existed Ban List by click , if you want to delete all Ban List, you just
ought to click ’Delete All Ban List’.
You can edit or move this contact to Contact after you select .
8 Phone Maintenance
8.1 Basic
NOTES: Don't cut off the electricity or network cable when doing upgrade in
the below ways!
8.1.1 HTTP Upgrade
You can upgrade the software, kernel and configuration etc. files by HTTP.
When using HTTP upgrade, you can set several parameters as follow:
HTTP Upgrade
www.escene.ru
Select a File Browse the software/kernel/configuration file which you need to
upgrade from HTTP
Software Used for upgrading the software of the phone
Upgrade
Kernel Upgrade Used for upgrading the kernel of the phone
Configuration You can used upload/download to upload/download the configure file
of the phone
XML Phone Used for uploading/downloading the XML phonebook of the phone
Book
Vcard Downloading all contacts in the Vcard mode, but upload only support
one by one.
EXT Module Used for updating/backup the expansion of the phone
[NOTES：The mode doesn't support this feature]
Log Used for the administrator to find out or making sure the problem
with this equipment.
All Config File All Config File includes: Configuration, Extern, Log, XML Phone book,
Enterprise Phone Book.
8.1.2 FTP Upgrade
You can upgrade the software, kernel and configure files by FTP.
When using FTP upgrade, you can set several parameters as follow:
FTP Upgrade
Server IP The IP address of the FTP server
www.escene.ru
Filename Downloading from FTP server
Username Providing by FTP server
Password Providing by FTP server
Software Upgrade Used for upgrading the software of the phone
Configuration Used for updating/backup to update/backup the configure file of
the phone
Phone Book Used for updating/backup to update/backup the phonebook of the
phone
NOTES: It's not necessary to input filename when doing backup Configuration,
Phone Book, EXT Module.
8.1.3 TFTP Upgrade
You can upgrade the software, kernel and configure files by TFTP.
When use TFTP upgrade, you can set several parameters as follow:
TFTP Upgrade
Server IP The IP address of the TFTP server
Filename Downloading from FTP server
Software Upgrade Used for upgrading the software of the phone
Configuration Used for updating/backup the configure file of the phone
Phone Book Used for updating/backup the phonebook of the phone

www.escene.ru
NOTES: It's not necessary to input filename when doing backup Configuration,
Phone Book, EXT Module.
8.1.4 Default Setting
You can load the phone to the factory default setting in default setting option.
Press the ‘Reset to Factory Setting’ option, the phone will load to factory default setting on
next reboot.
8.1.5 Reboot
You can use reboot option to reboot the phone.
8.2 Advanced
8.2.1 Log
This feature is use for the administrator to managing the equipment, like debugging, SIP
etc,. If you need to catch a debugging Level, you need to setup on this interface.
www.escene.ru
8.2.2 Auto Provision
When you open this auto provision feature, the phone will do auto provision after it detect
a different software or kernel (Higher or Lower) which are putted on the
TFTP,HTTP,HTTPS,FTP, server. For the detailed information about auto provision, you can
find it in the official website: HTTP://www.escene.cn/en
When using auto provision, you can set several parameters as follow:
Auto Provision
Auto Provision You can enable/disable auto provision by select on/off
Protocol Used for auto provision, it includes TFTP/HTTP/FTP
Software Server URL The server address of the auto provision
Username Providing by provision server
Password Providing by provision server
Auto Download Software Used for auto download software from server
Auto Download Kernel Used for auto download kernel from server
Auto Download Config File Used for auto download config file from server
Auto Download Expansion NOTES: The model doesn't support this feature.
Auto Download Enterprise Used for auto download Enterprise Phonebook from server
Phonebook
www.escene.ru
Auto Download Personal Used for auto download personal phonebook from server
Phonebook
Booting Checked Used for checking the auto provision when phone booting
Disable the phone while Enable/Disable the booting checking feature.
booting checking
Auto Provision Frequency Used for setting the time interval for auto provision
Auto Provision Time Used for the specific time for auto provision
Auto Provision Next Time Reset the Auto Provision Next Upgrading time.
AES Enable You can enable/disable AES encrypt for auto provision
AES Key The key of the AES
Auto Provision Now Used for doing auto provision immediately
9 Password
Here you can setting the administrator or user WEB password management. Select your
type. If you login as an administrator, you can modify both the user's and admin's
passwords.
10 WEB Other Settings or

Information - Appendix
10.1 WEB User
In the upper right corner of the website page, you can select the user or logout.
www.escene.ru
10.2 Multi-Language
In the upper right corner of the website page, you can select the language in the below list.
10.3 Note Tips
In the right middle of the website page, there is a Note tips in every function page. Hope it
can help you to know something about that.
www.escene.ru

Es290 Ip Innovative Voip Phone User Manual: Escene Communication

Uploaded by

Copyright:

Available Formats

Es290 Ip Innovative Voip Phone User Manual: Escene Communication

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Es290 Ip Innovative Voip Phone User Manual: Escene Communication

Uploaded by

Copyright:

Available Formats

ES290 IP Innovative

VoIP Phone User Manual

Attach the Bracket

Connect the Handset and optional Headset

3. Phone User Interface

3.1 Hardware Component Instructions

3.2 Phone Screen Display Features

b. :Account failed to register

c. :Account successfully registered

d. :Account successfully registered and DND feature is

: Handset Hand on status

:Headset Hand on status

3.3 Basic Network Settings

3.4 SIP Account Settings

Create an SIP --1) Select “System setting” > “Advanced setting”；

account --2) Enter the password required（The default is empty) ；

--3) Select “SIP” > “Account sip”；

configure the following parameters

-Enable account*: Select Enable

-Number of lines: Default is 2

-Description: description of this account

-Display Name: The name displayed on the screen

-Authentication user: the Authenticated users are matched

with the SIP server.(The default With the same account)

-Account*: the account matches with the SIP

-Out Bound Server: The out bound SIP server

The parameters with the * mark must be set.

--2) Enter the password required（The default is empty) ；

--3) Select “SIP” > “Account sip”；

--4) Select “Enable account” > “Disable”；

--5) Select “Save” to saves settings

3.5 Basic Features

3.5.1 Making a Call

Here are some easy ways to place a call on SayHi IP Phone:

Place a call using Put on your headset,

a headset active Headset button

so that the status light is

Red , and then do as

--Press Enter or OK button ,

-You can select which Account want to use, enable/disable

this feature and enable/disable reject anonymous

To redial the last placed call from your phone

-or press Navigation button-Left > “Dialed number”, select

a number, and press

3.5.4 Call Log

"All Calls", “Missed calls”, “Received calls” and “Dialed

- or press Navigation button (in Standby interface) > select

"All Calls"(up) “Missed calls”(down), “Received calls”(left)

and “Dialed numbers” (right)

--2) Then press button.

when in the idle.

and “Black List”,

- or press Navigation button (in Standby interface) > select

the desired contact.

--2) Then press button.

when in the idle.

3.5.6 Multi-lines to Answer the Call

the original call will be hold.)

Setting> Auto Answer >Device