POLYETHYLENE The Supreme Industries Ltd.

is an acknowledged
leader of India's plastic industry. It is credited with
pioneering several path breaking products and

Piping System has gained a valuable experience in providing

innovative and cost effective piping solutions. The
Company has been a trend setter and a torch
... The next generation piping bearer in the transition from conventional to
advanced plastic piping products in the country.
IS:4984
The Company's objective is to meet the growing
needs of its clientele in water and waste
management and in infrastructure sector through
CM/L-7789412
a specially designed high performance range of
piping products. The innovative product portfolio
offered by Supreme is extensive in nature and
applications. With its range of over 7500 products,
the most comprehensive in the piping industry,
Supreme caters to almost every conceivable need
and application in piping.
Supreme offers complete range of Polyethylene
(PE) pipes up to 800mm sizes for water supply,
drainage, irrigation, bore well application and
infrastructure projects. Supreme PE pipes are user
friendly, simple and easy to fit and equipped with
many outstanding features that assures long term
system performance and low maintenance cost.

Jeevan bhar ka saath...

 Polyethylene Piping System

The system Features and benefits

Supreme polyethylene pipes are a safe, long lasting and cost l High reliability and proven service performance
effective solution for potable water supply, irrigation, bore well
application, drainage, sewerage and infrastructure projects. l Resistance to low temperature
Supreme HDPE pipes are manufactured from virgin raw material l High impact resistance
with the help of state- of- the- art manufacturing facilities. The
plant is equipped with R and D facilities and stringent tests are l Abrasion resistance
carried out on raw material and finished goods to ensure the l Excellent flow characteristics
quality as per the national and international standards. Being a
pioneer in bringing innovative piping products for varied l Excellent chemical and corrosion resistance
applications, continuous improvement is a regular phenomenon. l Excellent weld-ability
All these activities are carried out with the help of experts in the
field of Polymer. Supreme strongly believes in providing l Excellent UV resistance
uncompromising quality products and services to delight the l Wide variety of installation methods
customers.
l Easy, quick and economical installation
The pipes and fittings are available in complete range from 20 to
800mm sizes. The pipes are available in PN 2.5 to PN 16 pressure l Long service life
class in PE 63, PE 80 and PE 100 grades. Supreme PE pipes are
l Excellent water hammer resistance
manufactured according to IS:4984 and ISO:4427. Supreme PE
pipes are tested by WRc-NSF, UK, that endorses its suitability for l Ideal in shifting soil condition and earthquake prone areas
potable water.

Pipes
Size range - 20 to 800mm
Pressure class - PN 2.5 to PN 16
Grades - PE 63, PE 80, PE 100.

Fittings
All the compatible fittings will be
made available in handmade form to
cater system requirements.

Standards
Application Grade Applicable standard
Potable water mains, house connections PE 63, PE 80 and PE 100 IS:4984, ISO:4427, DIN 8074/75, AS/NZS 4130
Rural and agricultural pipes PE 63 and PE 80 IS:14151 (P-1)
Column pipes for submersible pumps in coil form PE 63 and PE 80 IS:4984
Sprinkler and drip irrigation PE 63 and above grade IS:14151 Part - 1 and 2
Sewerage/subsoil drainage PE 80 and 100 IS:14333
Coal handling in mines PE 80 and 100 IS:4984, IS:14333
Industrial applications PE 63, 80 PE 100 IS:4984, IS:14333
ID Pipes for submersible pump PE 63, PE 80 Company standard
 Applications of HDPE Pipes
Water supply systems Industrial Environmental protection Agriculture Other
Transportation and Effluents, chemicals and Underground drainage and Column piping for Transportation of
distribution system treated/untreated water sewerage application/ submersible chemicals, solids,
disposal rehabilitation of existing sewer and jet pumps gas and oils

House service connection As hydro transport system Effluent and waste treatment Suction and Underwater pipelines/
e.g. municipal water for handling and conveyance plants delivery pipes desalination plants
bodies, SEZ’s, layout’s, etc. of iron, coal and cement
slurry in mines
For conveyance of edible Dust suppression piping systems Sprinkler irrigation
oil, fruit pulps, juices, milks in cement industry system
and other food materials
As a ventilation and air Sand slurry disposal pipes in Lift irrigation
conditioning duct dredging.
De-gassing pipes in water Insecticide spraying
effluent marine outfalls

Dimensions and pressure rating chart for HDPE pipes (PE 63) as per IS:4984
OD PN 2.5 PN 4 PN 6 PN 8 PN 10 PN 12.5 PN 16
DN Min Max Min Max Min Max Min Max Min Max Min Max Min Max
20 - - - - - - - - 2.3 2.8 2.8 3.3 3.4 4.0
25 - - - - - - 2.3 2.8 2.8 3.3 3.4 4.0 4.2 4.9
32 - - - - 2.3 2.8 3.0 3.5 3.6 4.2 4.4 5.1 5.4 6.2
40 - - 2.0 2.4 2.8 3.3 3.7 4.3 4.5 5.2 5.5 6.3 6.7 7.6
50 - - 2.4 2.9 3.5 4.1 4.6 5.3 5.6 6.4 6.8 7.7 8.4 9.5
63 2.0 2.4 3.0 3.5 4.4 5.1 5.8 6.6 7.0 7.9 8.6 9.7 10.5 11.8
75 2.3 2.8 3.6 4.2 5.3 6.1 6.9 7.8 8.4 9.5 10.2 11.5 12.5 14.0
90 2.8 3.3 4.3 5.0 6.3 7.2 8.2 9.3 10.0 11.2 12.2 13.7 15.0 16.7
110 3.4 4.0 5.3 6.1 7.7 8.7 10.0 11.2 12.3 13.8 14.9 16.6 18.4 20.5
125 3.8 4.4 6.0 6.8 8.8 9.8 11.4 12.8 13.9 15.5 16.9 18.8 20.9 23.2
140 4.3 5.0 6.7 7.6 9.8 11.0 12.8 14.3 15.6 17.4 19.0 21.1 23.4 26.0
160 4.9 5.6 7.7 8.7 11.2 12.6 14.6 16.3 17.8 19.8 21.7 21.4 26.7 29.6
180 5.5 6.3 8.6 9.7 12.6 14.1 16.4 18.3 20.0 22.2 24.4 27.1 30.0 33.2
200 6.1 7.0 9.6 10.8 14.0 15.6 18.2 20.63 22.3 24.8 27.1 30.4 33.4 37.0
225 3.9 7.8 10.8 12.4 15.7 17.5 20.5 22.8 25.0 27.7 30.5 33.8 37.5 41.5
250 7.6 8.6 12.0 13.4 17.5 19.5 22.8 25.3 27.8 30.8 33.8 37.4 41.4 46.1
280 8.5 9.6 12.4 15.0 19.6 21.8 25.8 28.3 31.2 34.6 37.9 41.9 46.7 51.6
315 9.6 10.8 15.0 16.7 22.0 24.4 28.7 31.8 35.0 38.7 42.6 14.1 52.5 58.0
355 10.8 12.1 17.0 18.9 24.8 27.5 32.3 35.8 39.5 43.7 48.0 53.0 59.2 65.4
400 12.2 14.3 19.1 22.2 28.0 32.4 36.4 42.1 44.5 51.4 54.1 62.5 - -
450 13.7 16.0 21.5 25.0 31.4 36.4 41.0 47.4 50.0 57.7 - - - -
500 15.2 17.7 23.9 27.7 34.9 40.0 45.5 52.6 55.6 64.2 - - - -
560 17.0 19.8 26.7 31.0 39.1 45.2 51.0 58.9 - - - - - -
630 19.1 22.2 30.0 34.7 44.0 50.8 57.3 66.1 - - - - - -
710 21.6 25.1 33.9 39.2 49.6 57.3 - - - - - - -
800 24.3 28.2 38.1 44.1 55.9 64.5 - - - - - - -
 Dimensions and pressure rating chart for HDPE pipes (PE 80) as per IS:4984
OD PN 2.5 PN 4 PN 6 PN 8 PN 10 PN 12.5 PN 16
DN Min Max Min Max Min Max Min Max Min Max Min Max Min Max
20 - - - - - - - - - - 2.3 2.8 2.8 3.3
25 - - - - - - - - 2.3 2.8 2.8 3.3 3.5 4.1
32 - - - - - - 2.4 2.9 3.0 3.5 3.6 4.2 4.5 5.2
40 - - - - 2.3 2.8 3.0 3.5 3.7 4.3 4.5 5.2 5.6 6.4
50 - - 2.3 2.8 2.9 3.4 3.8 4.4 4.6 5.3 5.6 6.4 6.9 7.8
63 - - 2.5 3.0 3.6 4.2 4.7 5.4 5.8 6.6 7.0 7.9 8.9 9.8
75 - - 2.9 3.4 4.3 5.0 5.6 6.4 6.9 7.8 8.4 9.5 10.4 11.7
90 2.3 2.8 3.5 4.1 5.1 5.9 6.7 7.6 8.2 9.3 10.0 11.2 12.5 14.0
110 2.7 3.2 4.3 5.0 6.3 7.2 8.2 9.0 10.0 11.2 12.3 13.8 15.2 17.0
125 3.1 3.7 4.9 5.6 7.1 8.1 9.3 10.5 11.4 12.8 13.9 15.5 17.3 19.3
140 3.5 4.1 5.4 6.2 8.0 9.0 10.4 11.7 12.8 14.3 15.6 17.4 19.4 21.6
160 4.0 4.6 6.2 7.1 9.1 10.3 11.9 13.3 14.6 16.3 17.8 19.8 22.1 24.6
180 4.4 5.1 7.0 7.9 10.2 11.5 13.4 15.0 16.4 18.3 20.0 22.2 24.9 27.6
200 4.9 5.6 7.7 8.7 11.4 12.8 14.9 16.6 18.2 20.3 22.3 24.8 27.6 30.6
225 5.5 6.3 8.7 9.8 12.8 14.3 16.7 18.6 20.5 22.8 25.0 27.7 31.1 34.5
250 6.1 7.0 9.7 10.9 14.2 15.9 18.6 20.7 22.8 25.3 27.8 30.8 34.5 38.2
280 6.9 7.8 10.8 12.1 15.9 17.7 20.8 23.1 25.5 28.3 31.2 34.6 38.7 42.5
315 7.7 8.7 12.2 13.7 17.9 19.9 23.4 26.0 28.7 31.8 35.0 38.7 43.5 48.1
355 8.7 9.8 13.7 15.3 20.1 22.4 26.3 29.2 32.3 35.8 39.5 43.7 49.0 54.1
400 9.8 11.5 15.4 18.0 22.7 26.4 29.7 34.4 36.4 42.1 44.5 51.4 55.2 63.7
450 11.0 12.9 17.4 20.3 25.5 29.6 33.4 38.7 41.0 47.4 50.0 27.7 - -
500 12.2 14.3 19.3 22.4 28.4 32.9 37.1 42.9 45.5 52.6 55.6 64.2 - -
560 13.7 16.0 21.6 25.1 31.7 36.7 41.5 48.0 51.0 58.9 - - - -
630 15.4 18.0 24.3 28.2 35.7 41.3 46.7 54.0 57.3 66.1 - - - -
710 17.4 20.3 27.4 31.8 40.2 46.5 52.6 60.7 - - - - - -
800 19.6 22.8 30.8 35.7 45.3 52.3 - - - - - - - -

Dimensions and pressure rating chart for Dimensions and pressure rating chart for
HDPE pipes (PE 100) as per IS:4984 HDPE pipes (PE 100) as per ISO:4427
OD PN 6 PN 8 PN 10 PN 12.5 PN 16 PN 4 PN 6 PN 8 PN 10 PN 12.5 PN 16
DN Min Max Min Max Min Max Min Max Min Max OD
(SDR 41) (SDR 26) (SDR 21) (SDR 17) (SDR 13.6) (SDR 11)
20 - - - - - - - - 2.3 2.8 DN Min Max Min Max Min Max Min Max Min Max Min Max
25 - - - - - - 2.3 2.8 2.9 3.4
20 - - - - - - - - - - 2.0 2.3
32 - - - - 2.4 2.9 2.9 3.4 3.7 4.3
40 - - 2.4 2.9 3.0 3.5 3.7 4.3 4.6 5.3 25 - - - - - - - - 2.0 2.3 2.3 2.7
50 2.3 2.8 3.0 3.5 3.7 4.3 4.6 5.3 5.7 6.5 32 - - - - - - 2.0 2.3 2.4 2.8 3.0 3.4
63 2.9 3.4 3.8 4.4 4.7 5.4 5.7 6.5 7.1 8.1 40 - - - - 2.0 2.3 2.4 2.8 3.0 3.5 3.7 4.2
75 3.5 4.1 4.5 5.2 5.6 6.4 6.8 7.7 8.5 9.6 50 - - 2.0 2.3 2.4 2.8 3.0 3.4 3.7 4.2 4.6 5.2
90 4.1 4.8 5.4 6.2 6.7 7.6 8.2 9.5 10.2 11.5 63 - - 2.5 2.9 3.0 3.4 3.8 4.3 4.7 5.3 5.8 6.5
110 5.0 5.7 6.6 7.5 8.1 9.2 10.0 11.2 12.4 13.9
75 - - 2.9 3.3 3.6 4.1 4.5 5.1 5.6 6.3 6.8 7.6
125 5.7 6.5 7.2 8.5 9.2 10.4 11.3 12.7 14.1 15.8
140 6.4 7.3 8.4 9.5 10.3 11.6 12.7 14.2 15.8 17.6 90 - - 3.5 4.0 4.3 4.9 5.4 6.1 6.7 7.5 8.2 9.2
160 7.3 8.3 9.6 10.8 11.8 13.2 14.5 16.2 18.1 20.2 110 - - 4.2 4.8 5.3 6.0 6.6 7.4 8.1 9.1 10.0 11.1
180 8.2 9.3 10.8 12.1 13.3 14.9 16.3 18.2 20.3 22.6 125 - - 4.8 5.4 6.0 6.7 7.4 8.3 9.2 10.3 11.4 12.7
200 9.1 10.3 12.0 13.4 14.8 16.5 18.1 20.2 22.6 25.1 140 - - 5.4 6.1 6.7 7.5 8.3 9.3 10.3 11.5 12.7 14.1
225 10.3 11.6 13.5 15.1 16.6 18.5 20.4 22.7 25.4 28.2
160 - - 6.2 7.0 7.7 8.6 9.5 10.6 11.8 13.1 14.6 16.2
250 11.4 12.8 15.0 16.7 18.4 20.5 22.6 25.1 28.2 31.3
180 - - 6.9 7.7 8.6 9.6 10.7 11.9 13.3 14.3 16.4 18.2
280 12.8 14.3 16.8 18.7 20.6 22.9 25.3 28.1 31.6 35.0
315 14.4 16.1 18.9 21.0 23.2 25.8 28.5 31.6 35.5 39.3 200 - - 7.7 8.6 9.6 10.7 11.9 13.2 14.7 16.3 18.2 20.2
355 16.2 18.1 21.2 23.6 26.2 29.1 32.1 35.6 40.0 44.2 225 - - 8.6 9.6 10.8 12.0 13.4 14.9 16.6 18.4 20.5 22.7
400 18.2 21.2 23.9 27.7 29.5 34.2 36.2 41.9 45.1 52.1 250 - - 9.6 10.7 11.9 13.2 14.8 16.4 18.4 20.4 22.7 25.1
450 20.2 23.8 26.9 31.2 33.1 38.3 40.7 47.1 50.8 58.7 280 - - 10.7 11.9 13.4 14.9 16.6 18.4 20.6 22.8 25.4 28.1
500 22.8 26.5 29.9 34.6 36.8 42.6 45.2 52.2 56.4 65.1
315 7.7 8.6 12.1 13.5 15.0 16.6 18.7 20.7 23.2 25.7 28.6 31.6
560 25.5 29.6 33.5 38.8 41.2 47.6 50.6 58.4 - -
355 8.7 9.7 13.6 15.1 16.9 18.7 21.1 23.4 26.1 28.9 32.2 35.6
630 28.7 33.3 37.7 43.6 46.4 53.6 56.9 65.7 - -
710 32.3 37.4 42.4 49.0 52.3 60.4 - - - - 400 9.8 10.9 15.3 17.0 19.1 21.2 23.7 26.2 29.4 32.5 36.3 40.1
800 36.4 42.1 47.8 55.2 58.9 68.0 - - - - 450 11.0 12.2 17.2 19.1 21.5 23.8 26.7 29.5 33.1 36.6 40.9 45.1
 Polyethylene Piping System

Dimensions and pressure rating chart for HDPE pipes (PE 80 ) as per ISO:4427
OD PN 5 (SDR 26) PN 6 (SDR 21) PN 8 (SDR 17) PN 10 (SDR 13.6) PN 12.5 (SDR 11) PN 16 (SDR 9)
DN Min Max Min Max Min Max Min Max Min Max Min Max
20 - - - - - - - - 2.00 2.30 2.30 2.70
25 - - - - - - 2.00 2.30 2.30 2.70 3.00 3.40
32 - - - - 2.00 2.30 2.40 2.80 3.00 3.40 3.60 4.10
40 - - 2.00 2.30 2.40 2.80 3.00 3.50 3.70 4.20 4.50 5.10
50 2.00 2.30 2.40 2.80 3.00 3.40 3.70 4.20 4.60 5.20 5.60 6.30
63 2.50 2.90 3.00 3.40 3.80 4.30 4.70 5.30 5.80 6.50 7.10 8.00
75 2.90 3.30 3.60 4.10 4.50 5.10 5.60 6.30 6.80 7.60 8.40 9.40
90 3.50 4.00 4.30 4.90 5.40 6.10 6.70 7.50 8.20 9.20 10.10 11.30
110 4.20 4.80 5.30 6.00 6.60 7.40 8.10 9.10 10.00 11.10 12.30 13.70
125 4.80 5.40 6.00 6.70 7.40 8.30 9.20 10.30 11.40 12.70 14.00 15.60
140 5.40 6.10 6.70 7.50 8.30 9.30 10.30 11.50 12.70 14.10 15.70 17.40
160 6.20 7.00 7.70 8.60 9.50 10.60 11.80 13.10 14.60 16.20 17.90 19.80
Note: Blue MDPE Pipes (PE80) for drinking water purpose are also made available in SDR 21, SDR11 and SDR 9 in 20 to160mm sizes.
Dimensions and pressure rating chart for HDPE pipes as per AS/NZS 4130
OD SDR 41 SDR 33 SDR 26 SDR 21 SDR 17 SDR 13.6 SDR 11 SDR 9
DN Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
20 - - - - - - - - - - 1.6 1.9 1.9 2.2 2.3 2.7
25 - - - - - - - - 1.6 1.9 1.9 2.2 2.3 2.7 2.8 3.2
32 - - - - - - 1.6 1.9 1.9 2.2 2.4 2.8 2.9 3.4 3.6 4.1
40 - - - - - - 1.9 2.2 2.4 2.8 3.0 3.4 3.7 4.2 4.5 5.1
50 - - - - - - 2.4 2.8 3.0 3.4 3.7 4.2 4.6 5.2 5.6 6.3
63 - - - - 2.4 2.8 3.0 3.4 3.8 4.3 4.7 5.3 5.8 6.5 7.1 8.0
75 - - 2.3 2.7 2.9 3.3 3.6 4.1 4.5 5.1 5.5 6.2 6.8 7.6 8.4 9.4
90 - - 2.8 3.2 3.5 4.0 4.3 4.9 5.4 6.1 6.6 7.4 8.2 9.2 10.1 11.3
110 2.7 3.1 3.4 3.9 4.3 4.9 5.3 6.0 6.6 7.4 8.1 9.1 10.0 11.1 12.3 13.7
125 3.1 3.6 3.9 4.4 4.8 5.4 6.0 6.7 7.4 8.3 9.2 10.3 11.4 12.7 14.0 15.5
140 3.5 4.0 4.3 4.9 5.4 6.1 6.7 7.5 8.3 9.3 10.3 11.5 12.7 14.1 15.7 17.4
160 4.0 4.5 4.9 5.5 6.2 7.0 7.7 8.6 9.5 10.6 11.8 13.1 14.6 16.2 17.9 19.8
180 4.4 5.0 5.5 6.2 6.9 7.7 8.6 9.6 10.7 11.9 13.3 14.8 16.4 18.2 20.1 22.3
200 4.9 5.5 6.2 7.0 7.7 8.6 9.6 10.7 11.9 13.2 14.7 16.3 18.2 20.2 22.4 24.8
225 5.5 6.2 6.9 7.7 8.6 9.6 10.8 12.0 13.4 14.9 16.6 18.4 20.5 22.7 25.1 27.8
250 6.2 7.0 7.7 8.6 9.6 10.7 11.9 13.2 14.8 16.4 18.4 20.4 22.7 25.1 27.9 30.8
280 6.9 7.7 8.6 9.6 10.7 11.9 13.4 14.9 16.6 18.4 20.6 22.8 25.4 28.1 31.3 34.6
315 7.7 8.6 9.7 10.8 12.1 13.5 15.0 16.6 18.7 20.7 23.2 25.7 28.6 31.6 35.2 38.9
355 8.7 9.7 10.9 12.1 13.6 15.1 16.9 18.7 21.1 23.4 26.1 28.9 32.2 35.6 39.6 43.7
400 9.8 10.9 12.3 13.7 15.3 17.0 19.1 21.2 23.7 26.2 29.4 32.5 36.3 40.1 44.7 49.3
450 11.0 12.2 13.8 15.3 17.2 19.1 21.5 23.8 26.7 29.5 33.1 36.6 40.9 45.1 50.2 55.4
• SDR - Standard Dimension Ratio
Length and packaging
• Pipes are available in PE 80 and PE 100 grade with different pressure classes.
Size range (mm) Coil length (m)
Jointing techniques
20 - 50 100, 200, 500, 1000
Supreme Polyethylene pipes can be jointed by different means,
some of the jointing techniques are as given below: 63 - 75 100, 200, 300
• Butt fusion • Electro fusion • Socket fusion 90 -110 50, 100, Straight length of 6 - 12m
• Compression joint • Flanged joint • Coupling joint 125 - 800 Straight length 6 - 12m

Water hammer resistance

HDPE can withstand repetitive pressure surges that exceed the static pressure rating of the pipe giving it excellent resistance
to water hammer events. In DI pipe, anticipated surge pressures are the highest. Surge pressure in PE is 44% less than in PVC
and 81% less than in DI. PE withstands surges up to 150-200 % of design pressure.
When PE is used, piping system components are subjected to a significantly lower surge.
 Polyethylene Piping System

2 3
Butt-Welding (procedure) 1 A B
Check the Wall Alignment and Gap
The alignment of the two parts should be checked at the same time. A possible
misalignment on the outside must not exceed 10% of the thickness of the wall
(Fig 5). If this limit is exceeded, a better clamping position is to be sought by
(Fig.1) (Fig.2)
rotating the pipe. In such a case, however, the surface must be re-planed. 1) Pipe 2) Heating tool 3) Fitting A) Incorrect B) Correct
Important - The welding surfaces must be planed immediately prior to the
jointing.
Once it has attained the fusion temperature, position the heating element in the A B

butt-welding machine. Press the parts to be joined against the heating element
with the force required for equalization until the entire circumference of each of
the jointing faces rests completely against it and a bead has formed. Reduce the
equalization pressure almost to zero. The heating time listed in the table below (Fig.3) (Fig.4) (Fig.5)
is measured from this moment.
Leave parts in the butt-welding jointing machine at welding pressure until the
K>0mm
end of the cooling period. Once the heating period has elapsed, remove the
parts from heating element, which should then be removed without touching F F

the jointing surfaces and push the parts together immediately. The change over
time must not exceed the value listed in the table. Pay particular attention (Fig.6) (Fig.7)
during jointing that the parts be moved together swiftly until the surface are
about to touch. Then they should be moved together so that they are in contact
along the entire circumference. Next the pressure should be increased rapidly to
the present jointing within the period of time specified in the table below. This
pressure must be necessary, especially shortly after the jointing pressure has
been attained. (Fig 6) The jointing parts must stay in the welding machine under
jointing pressure until the end of the cooling period specified in the table.
Welding bead checks
A bead should form around the entire circumference of the pipe. Jointing of
two-lip point should be above the pipe circumference means always being
positive. (Fig 7)

Recommended values for the heated tool butt-welding of pipes and fittings
Wall thickness Height of bead Heating time Changeover time Time to reach Cooling time under
(mm) (mm) (sec) max (sec) full jointing (sec) joining pressure (min)
up to 4.5 0.5 45 5 5 6
4.5 -7 1.0 45-70 5-6 5-6 6-10
7 - 12 1.5 70-120 6-8 6-8 10-16
12-19 2.0 120-190 8-10 8-11 16-24
19-26 2.5 190-260 10-12 11-14 24-32
26-37 3.0 260-370 12-16 14-19 32-45
37-50 3.5 370-500 16-20 19-25 45-60
50-70 4.0 500-700 20-25 25-35 60-80
• Any specification may change without prior notice. • All information contained in this literature is given in good faith and believed to be accurate and reliable. Because of many factors which may be
outside our knowledge or control and affect the use of the product, no warranty is given or implied with respect to such information, nor do we offer any warranty of immunity against patent
infringement. No responsibility can be accepted for any error, omissions or incorrect assumptions.

The Supreme Industries Ltd. (Plastic Piping Division) Branch Offices ' Tel.
Corporate Office: 1161/1162, Solitair Corporate Park, Ahmedabad : 079-30028371
Building No. 11,167, Guru Hargovindji Marg, Chakala, Bangalore : 080-30913715
Andheri Ghatkopar Link Road, Andheri (East) Mumbai - 400 093. India. Chennai : 044-39811182
Tel: 91-22-67710000, 40430000 Cochin : 0484-2385346
Hyderabad : 040-23221130
Regd. Office: 612 Raheja Chambers, Nariman Point, Indore : 0731-2432684
Mumbai 400 021. India. Tel.: (022) 22851656, 22820072 Jaipur : 09910995853
E-mail: [email protected] Website: www.supreme.co.in Jalgaon Gadegaon : 0257-3050541,42
Export Division: Tel: 91-22-6771 0126 / 4043 0126; Fax: 6771 0130 Kanpur : 0512-2332280
Overseas Office: Sharjah, UAE. Tel# +971 6 557 4484; Fax# +971 6 557 4485 Kolkata : 033-30070123
Noida (Delhi) : 0120-6660000 I & T SIL Gadegaon, Dist-Jalgaon=PC/PEMP/MKG/55=REV.07-11/2017
CIN: L35920MH1942PLC003554