Scribd Logo
Upload

Welcome to Scribd!

  • 15 views

    FL052.1 - Đề Thi NLM - Tiếng Anh Final - exam

    Uploaded by

    PHẠM TRẦN LƯU
    This document contains a 3 question final exam on kinematics and dynamics of machines. Question 1 asks the test taker to detach a mechanism shown in Figure 1 into statically determinable groups and the driving link, and provide a short note on the solving procedure. Question 2 shows a statically determinable group in Figure 2 and asks the test taker to determine the joint reaction force R12 based on given forces and dimensions. Question 3 provides a gear train diagram in Figure 3 and asks the test taker to determine the number of teeth on gear z5 based on a given rotation velocity, and then determine the rotation velocities of several other gears.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    FL052.1 - Đề Thi NLM - Tiếng Anh Final - exam

    Uploaded by

    PHẠM TRẦN LƯU
    15 views1 page
    This document contains a 3 question final exam on kinematics and dynamics of machines. Question 1 asks the test taker to detach a mechanism shown in Figure 1 into statically determinable groups and the driving link, and provide a short note on the solving procedure. Question 2 shows a statically determinable group in Figure 2 and asks the test taker to determine the joint reaction force R12 based on given forces and dimensions. Question 3 provides a gear train diagram in Figure 3 and asks the test taker to determine the number of teeth on gear z5 based on a given rotation velocity, and then determine the rotation velocities of several other gears.

    Original Description:

    Đề Thi Nguyên lý máy

    Original Title

    FL052.1_Đề Thi NLM_Tiếng Anh Final_exam

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains a 3 question final exam on kinematics and dynamics of machines. Question 1 asks the test taker to detach a mechanism shown in Figure 1 into statically determinable groups and the driving link, and provide a short note on the solving procedure. Question 2 shows a statically determinable group in Figure 2 and asks the test taker to determine the joint reaction force R12 based on given forces and dimensions. Question 3 provides a gear train diagram in Figure 3 and asks the test taker to determine the number of teeth on gear z5 based on a given rotation velocity, and then determine the rotation velocities of several other gears.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    15 views1 page

    FL052.1 - Đề Thi NLM - Tiếng Anh Final - exam

    Uploaded by

    PHẠM TRẦN LƯU
    This document contains a 3 question final exam on kinematics and dynamics of machines. Question 1 asks the test taker to detach a mechanism shown in Figure 1 into statically determinable groups and the driving link, and provide a short note on the solving procedure. Question 2 shows a statically determinable group in Figure 2 and asks the test taker to determine the joint reaction force R12 based on given forces and dimensions. Question 3 provides a gear train diagram in Figure 3 and asks the test taker to determine the number of teeth on gear z5 based on a given rotation velocity, and then determine the rotation velocities of several other gears.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    FL052.

    Semester / A.Y. 1 2021 - 2022


    FINAL EXAM
    Date 22 / 12 /2021
    Course title Kinematics and Dynamics of Machines
    UNI. OF TECHNOLOGY – VNUHCM Course ID ME1015
    FACULTY OF MECHANICAL ENGINEERING Duration 60 minutes Q. sheet code
    DIVISION OF MACHINE DESIGN
    Notes: - Open book

    Question 1 (L.O.3.1) (3M) :


    We have a task shown in
    figure 1. Ignore all gravitation
    forces and inertial forces and
    moments. Detach the
    mechanism to a set of
    statically determinable
    groups and driving link,
    indicate clearly links and
    joints of each group, and give
    a short note about the task
    solving procedure (you do
    not need to write the
    equations and solve them).
    Figure 1

    Question 2 (L.O.3.2) (3M) : A statically


    determinable group {links 2, 3 and three revolute
    joints B, C, D} is shown in figure 2. We have joint
    reaction force R43 = 2F, gravitation force P2 = F and
    dimension a. Determine joint reaction force R12
    applied on link 2 at joint B – identify Rx12, Ry12
    (Ignore all gravitation forces and inertial forces and
    moments that are not mentioned).

    Figure 2

    Question 3 (L.O.2. 3) (4M) : Gear train shown in figure 3


    has rotation velocity of gear z1 : n1 = 900 RPM.
    a. Determine the number of teeth of gear z5 (all gears are cut
    in standard and have the same module). (1M)
    b. Determine rotation velocities of gears z7, z4, and z6. (3M)

    --- END –

    Figure 3

    Student’s ID: .............................. Student’s full name: ....................................................................... Page 1/1

    You might also like