Scribd
Upload
160 views1 page

CF-0015-01 Recip Startup Formato Bitzer

This document provides a template for recording startup and measurement data for refrigeration compressor systems. The template includes fields to record information about the location, customer, technician, refrigerant type, compressor model numbers, operating conditions like temperatures and pressures, electrical measurements, run times, and notes. The goal is to capture key operating parameters to help with system diagnosis and optimization.

Uploaded by

Oscar Mayorga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
160 views1 page

CF-0015-01 Recip Startup Formato Bitzer

This document provides a template for recording startup and measurement data for refrigeration compressor systems. The template includes fields to record information about the location, customer, technician, refrigerant type, compressor model numbers, operating conditions like temperatures and pressures, electrical measurements, run times, and notes. The goal is to capture key operating parameters to help with system diagnosis and optimization.

Uploaded by

Oscar Mayorga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CF-0015-01

RECIP STARTUP / MEASUREMENT REPORT


JANUARY 2014

Startup / Measurement Report for Recip Compressors

Location: System/Application Desc. (chiller, heatpump, etc):


Customer: Date:
Technician: Refrigerant: Oil Type:
Open Drive Only: Motor size (HP): Pulley/Direct Drive: Compressor RPM:
Date / Time Comp 1 Comp 2 Comp 3
Compressor, Serial No.
Compressor, Model No.
Rack # / Suct Grp # / Comp #
Ambient Temp °F
Suction Pressure psig
Suction Line Temperature * °F
Discharge Pressure psig
Condensing Pressure psig
Discharge line Temperature* °F
High Oil Pressure (+) psig
Crankcase Pressure (-) psig
Net oil Pressure psid
Oil Level
Oil Temp °F
Voltage (note if any leg is diff) V / / / / / /
Amperage Draw (note diff legs) A / / / / / /
Total Running Hrs (or install date) hr
Cycles per hours (average) #/hr
Condenser (air or water)
Liquid Temperature °F
Cooling Medium inlet Temp. °F
Cooling Medium outlet Temp. °F
Condenser Pressure Outlet psig
Evaporator (air/water/fluid)
Sight Glass, Bubbles y/n
Liquid Temperature @ TXV °F
Evaporator Outlet Pressure psig
Sat. Evaporating Temperature °F
Evap Outlet Gas Temperature °F
Medium inlet Temp. °F
Chilled Medium, outlet Temp. °F

NOTES:

Please fill out as much information as possible. Attach any other notes that are relevant.
Use thermocouples if possible. Infrared is not considered as reliable for temperature measurements.
*Measure at compressor, ideally within 1‘ of compressor. [email protected]
[email protected]

You might also like