Scribd Logo
Upload

Welcome to Scribd!

  • 93 views

    Antivibe Aquaplas

    Uploaded by

    Carlos Freund
    Antivibe DL is a vibration damping liquid that can be applied by spraying, troweling, or brushing to reduce noise and vibration. It should be applied at a thickness of 1 to 1.5 times the thickness of the metal surface when used on heavy metal products. Antivibe DL dries to form a flexible coating that dampens vibrations and is resistant to water, oils, solvents, acids and alkalis. It can be used on surfaces like ducting, sheet metal, sinks, doors and vehicle body panels to reduce structure-borne and air-borne vibrational energy.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Antivibe Aquaplas

    Uploaded by

    Carlos Freund
    93 views1 page
    Antivibe DL is a vibration damping liquid that can be applied by spraying, troweling, or brushing to reduce noise and vibration. It should be applied at a thickness of 1 to 1.5 times the thickness of the metal surface when used on heavy metal products. Antivibe DL dries to form a flexible coating that dampens vibrations and is resistant to water, oils, solvents, acids and alkalis. It can be used on surfaces like ducting, sheet metal, sinks, doors and vehicle body panels to reduce structure-borne and air-borne vibrational energy.

    Original Title

    Antivibe_Aquaplas

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Antivibe DL is a vibration damping liquid that can be applied by spraying, troweling, or brushing to reduce noise and vibration. It should be applied at a thickness of 1 to 1.5 times the thickness of the metal surface when used on heavy metal products. Antivibe DL dries to form a flexible coating that dampens vibrations and is resistant to water, oils, solvents, acids and alkalis. It can be used on surfaces like ducting, sheet metal, sinks, doors and vehicle body panels to reduce structure-borne and air-borne vibrational energy.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    93 views1 page

    Antivibe Aquaplas

    Uploaded by

    Carlos Freund
    Antivibe DL is a vibration damping liquid that can be applied by spraying, troweling, or brushing to reduce noise and vibration. It should be applied at a thickness of 1 to 1.5 times the thickness of the metal surface when used on heavy metal products. Antivibe DL dries to form a flexible coating that dampens vibrations and is resistant to water, oils, solvents, acids and alkalis. It can be used on surfaces like ducting, sheet metal, sinks, doors and vehicle body panels to reduce structure-borne and air-borne vibrational energy.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    WILREP LTD. AcoustiGuard Vibration Damping Materials 3.

    603

    APPLICATION GUIDELINES
    ANTIVIBE – DL
    1. Apply Antivibe DL by spraying (airless
    preferable), trowelling or brushing. Do not
    apply if ambient temperature falls below 50°F.
    2. All surfaces must be completely clean.
    Thoroughly degrease all surfaces to be
    coated. Loose scale or corrosion should be
    removed by sandblasting or wire brushing. On
    bare steel, a rust-preventing prime coat must
    be applied.
    3. Antivibe is shipped at the proper consistency
    for application. If necessary, use only a small
    amount of water for thinning. Use no solvents.
    4. When (air) spraying, feed line is 3/4” I.D. Use
    a 1/4” round nozzle or equivalent. Atomizing
    pressure is 40 to 50 p.s.i. Keep gun in water
    when not in use. Clean equipment with water
    after each shift and before material dries.
    5. On heavy metal products apply at 1 to 1-1/2
    Vibration Damping Compound times metal thickness. Apply only 3/16” at one
    time and allow to set before additional coats.
    1.5 lbs. wet Antivibe will cover one square foot
    Antivibe DL is an off-white, paste-like liquid that is easily applied at dry thickness of 1/8”.
    by spray, trowel or brush. It is highly resistant to water, oils,
    solvents, acids and alkali. The material is non-toxic, non- WEIGHT and THICKNESS of APPLICATION
    Sheet Net Wet Dry
    flammable (wet or dry), almost odorless and is non-aging. Also GAUG Metal Weight Thicknes Weight
    available in dry sheet form with or without pressure sensitive E Thicknes Lbs./sq.ft. s Lbs./sq.ft.
    adhesive – Antivibe DS – sheet number 3.602. The dry layer s Inches
    can be painted to match decorative treatments. 12 .1046 1.24 .150 .77
    14 .0747 0.90 .111 .56
    16 .0598 0.71 .088 .44
    Antivibe DL (Damping Liquid) is a water based compound that is
    18 .0478 0.53 .066 .34
    highly effective in reducing vibrational resonance and noise often 20 .0359 0.40 .049 .25
    described as humming or tinniness. It can be used in a wide 22 .0299 0.31 .038 .20
    range of applications such as ducting, sheet metal cabinetry, 24 .0239 0.25 .030 .16
    tubs & sinks, doors and on many other substrates. Applying
    Antivibe to affected surfaces will dissipate structure-borne
    vibrational energy and radiated air-borne energy. PRODUCT DATA
    Flammability (dry) Pass FMVSS-302
    Flame Spread index 13 (ASTM E-162)
    The visco elastic properties of Antivibe Smoke Development 0
    Fuel Contribution 0
    (Liquid or Sheet) makes vibrating surfaces poor Flash Point None
    transmitters of vibrational energy.
    This damping material is unable to transfer the Viscosity Paste-like liquid
    Colour Off-white
    energy of the vibrating source fast enough to
    transmit much noise or vibration. Air dry above 40°F – can be oven dried.
    Non-toxic, non-tacky, can be painted.
    Damping properties not apparent until coating is
    dry.
    APPLICATIONS Keep from freezing.
    z Covers and Cabinets
    Performance – Composite Loss Factor charts
    z Ducting and Plenums available on request.
    z Office Furniture
    z Sinks and Tubs For complete application assistance contact direct,
    z Doors
    z Vehicle Cab Sheet Metal
    WILREP LTD.
    1515 Matheson Blvd. E., Unit C-10
    z Boat Hulls and Bulkheads Mississauga, Ontario, Canada L4W 2P5
    Tel. (905)625-8944
    Fax (905)625-7142
    www.wilrep.com e-mail: [email protected]

    You might also like