Scribd
Upload
146 views2 pages

For RRL

This document discusses several projects related to using sensors and microcontrollers to monitor and control temperature and humidity. Specifically, it describes projects that use Arduino boards to automatically control fan speed based on temperature readings, send SMS alerts when humidity levels exceed a threshold, measure soil moisture variability to inform irrigation, and monitor and notify of high temperatures in a server room. It also summarizes a project to integrate temperature and gas sensors to measure and maintain the sensing material at 200°C.

Uploaded by

Jan Ryan Danlag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
146 views2 pages

For RRL

This document discusses several projects related to using sensors and microcontrollers to monitor and control temperature and humidity. Specifically, it describes projects that use Arduino boards to automatically control fan speed based on temperature readings, send SMS alerts when humidity levels exceed a threshold, measure soil moisture variability to inform irrigation, and monitor and notify of high temperatures in a server room. It also summarizes a project to integrate temperature and gas sensors to measure and maintain the sensing material at 200°C.

Uploaded by

Jan Ryan Danlag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

This paper discusses a possibility how to make learning of control theory basics more

interesting for an individual learner. Specifically, an approach of learning by doing is applied


when using a low-cost Arduino architecture for each student. 

According to Kunla Singh (2015), Automatic Fan Speed Control system utilizing Arduino as we
all know that we are slowly moving toward automation and Automation is among the trending
topics. Basically in this project will be controlling the fan speed with respect to the temperature.
The system will get the temperature from the temperature sensor and it’ll control the speed
according to the temperature, set by the person.

In this project, microcontroller varieties the processing parts, which firstly senses the
temperature and the controller then compares the information with the set temperature. If the
current temperature is larger than the set temperature, the controller turns ON the fan and the
set pace shall be proportional to the difference between the set temperature and the current
temperature. If the present temperature is less than the set temperature, the fan shall be turned
OFF.

The fan’s velocity will change according to the temperature.

Moreover, RipunjayChachan (2015), said designing an clever Temperature-Cum-Humidity


monitoring gadget is depicted in this present project. The designing of the absolutely practical
prototype is developed in-house. Once the humidity of the temperature will get out of the range
talked about by the consumer the device sends an SMS to the user’s predefined number. This
SMS contains data on the present temperature and the humidity. The developed system is also
in a place to ship the data to the monitoring station for recording and graph plotting for analyzing
functions on the later stage.

The developed system has been tested beneath numerous simulated conditions.

Jeffrey Alan Siegfried (2016) Remote Sensing to Quantify in-field soil moisture variability in
irrigated maize manufacturing, Agriculture is the biggest shopper of water globally. As strain on
out there water resources will increase, the want to exploit know-how so as to produce more
meals with much less water becomes crucial. The technological hardware requisite for precise
water supply methods corresponding to variable rate irrigation is commercially available.
Despite that, strategies to formulate a well timed, accurate prescription for these systems are
inadequate. Spectral vegetation indices, particularly Normalized Difference Vegetation Index,
are sometimes used to gauge crop vigor and related parameters (e.g. leaf nitrogen content and
grain yield). However, research rarely addresses the affect of soil moisture on the indices.
Canopy temperature measured using cheap infrared thermometers could additionally serve as
an indicator of water stress, however present methods which exploit the data may be
cumbersome.

According to RogobertoSolorio (2015), a web-based temperature monitoring system for the


faculty of arts and letters The Web-Based Temperature Monitoring System for the College of
Arts and Letters helps customers hold track of the College of Arts & Letters’ server room
temperature from a remote location. The project’s mission is to inform system administrators
through email/text if a important temperature has been reached inside the server room, in
addition to provide a technique for displaying the current server room temperature.
Base on Robert Jaron (2016) in conclusion, our integrated board design has been accomplished
and tested effectively. The system is intended to combine the temperature measurement part
using temperature sensors, heater management unit utilizing PWM output and resistance
change reading part utilizing the Wheatstone bridge principle for software of gasoline sensor
know-how. Results show that the design standards have been glad to maintain the fuel sensing
material at a predetermined temperature of 200°C and skim the resistance change of gas 39
sensors efficiently. However, there are few limitations relating to with accuracy and get in
contact with space of the heater with a temperature sensor that have to be addressed in future
works by making use of more tuning methods and efficient design. This work could be extended
and optimized to achieve its final objective and high-level performance.

You might also like