12/23/22, 10:08 AM Selection Tool | NISSEI Corporation

　 Date Issued： 2022/12/23

Calculation Selection No： e1-e1671770142t

Calculation Selection　Chain (Belt) Conveyor　Calculation Report

Direct linkage to the drive shaft(coupling etc.)
※Sample Image

https://sentei.nissei-gtr.co.jp/english/calculation/conveyor/print.php 1/5
12/23/22, 10:08 AM Selection Tool | NISSEI Corporation

Application Type

Chain (Belt) Conveyor

1　Gearmotor series

Induction Gearmotor(MID series / MINI series)

2　Output Shaft Type

Hollow Shaft (FS, F2, F3 type)

3　Linkage method

Direct linkage to the drive shaft(coupling etc.)

4　User values

Conveyor Speed V = 200mm/s Service Factor Sf = 1.25

Weight of the Work M1 = 1200kg/pcs Correction Coefficient of Moment of

C= 3
Inertia by Operating Conditions
Number of Works n1 = 1pcs

Weight of the Sprocket(Roller) M2 = 10kg/pcs

Motor Rated Rotational Speed N1 = 1400 r/min
Number of Sprockets(Rollers) n2 = 4pcs

Weight of the Chain(Belt) M3 = 156kg Repeated Stopping Accuracy ±3mm

=
P.C.D. of Sprocket (Customer Input Value) (travel distance equivalent)
D1 = 196mm
(Outer Diameter of the roller)

Conveyor Inclination Angle θ = 0°

https://sentei.nissei-gtr.co.jp/english/calculation/conveyor/print.php 2/5
12/23/22, 10:08 AM Selection Tool | NISSEI Corporation

Coefficient of Friction of
μ= 0.25
the chain(belt) and guide

Product selection conditions

Calculation Result Note

　　　 ・In this calculation, the machine efficiency of the device is assumed to be

Reduction Ratio 1/60 100%. If there is a possibility that the mechanical efficiency of the
equipment may have a major impact, be sure to recalculate in your
Output Shaft Allowable company including the efficiency.
Output Shaft Load Torque418.97
Torque(N・m) ・There are 1Ph motors with the starting torque values less than that of
the allowable torque. In such cases, it is recommended that you select a
Motor Shaft Equivalent
Motor Shaft Equivalent motor with a larger capacity during the selection process.
0.01101259 Load Inertia Moment(kg・
Load Inertia Moment One may refer to the test report of each product for the starting torque
m2)
value.
Refer to the catalog for each allowable ・This calculation uses a "selection ratio" so that the speed is equivalent
values.
or faster. If the selection ratio is not your desired ratio, please recalculate
by adjusing the work speed (V) or rotation speed (N)

https://sentei.nissei-gtr.co.jp/english/calculation/conveyor/print.php 3/5
12/23/22, 10:08 AM Selection Tool | NISSEI Corporation

Calculation Result
Reduction Ratio

V ×60
i = = 1/
71.84
N1×D1×π

Reduction Ratio
Assumingi = 1/60 for the calculation

Output Shaft Load Torque

T = 9.8 × [(M1 × n1 × cos θ + M2 × n2 + M3) × µ + (M1 × n1 × sin θ)]× D1

2×1000
× Sf = 418.97 N⋅m

Motor Shaft Equivalent Load Inertia Moment

2
1 D1 2 2
J = (M1 × n1 + × M2 × n2 + M3)×( ) × (i) × C = 0.01101259 kg⋅m
2 2×1000

O.H.L. on Output Shaft

In case of direct linkage to the drive shaft, it is assumed that O.H.L. does not apply.

https://sentei.nissei-gtr.co.jp/english/calculation/conveyor/print.php 4/5
12/23/22, 10:08 AM Selection Tool | NISSEI Corporation

Notes regarding this calculation result

All the calculation results on this report is for reference only.

We do not guarantee the contents.
Use it as a reference when selecting a product.
When using the product, always recalculate and confirm whether it suits your condition of use.

Calculation Selection No： e1-e1671770142t

https://sentei.nissei-gtr.co.jp/english/calculation/conveyor/print.php 5/5