9000 Series

FLANGED BALL VALVES
ASME CLASS 150 & 300

FULL BORE:
½” - 24” (DN 15 - 600) SERIES 9000
The Jamesbury® polymer-seated flanged ball

valves provide industry leading performance and
reliability. Offered in a wide variety of materials to
suit an extensive range of applications these valves
are designed and manufactured with all our latest
technology and expertise.
Features And Benefits
□□ Robust engineering design yields leading cycle
Unique Sealing life
The superior performance of Jamesbury ball valves □□ Outstanding quality provides confidence
is achieved by the unique design of the seats. The □□ Flexible lip seat provides bi-directional zero-leak
flexible lip seats exert continuous sealing pressure shut-off and minimum maintenance
on the ball and automatically compensate for wear □□ Xtreme seats provide longer life and expanded
and changes in pressure and temperature, yielding pressure-temperature capability
positive bi-directional zero-leak shut-off. The stem
seal sealing system ensures minimum emissions. □□ Patented stem seal system engineered to provide
superior emissions performance (1/2” - 11/2”)
Materials □□ Live loaded stem packing enhances emissions
performance and reduces maintenance (1/2” - 6”)
Standard products are available with carbon steel
body and stainless steel trim or all stainless steel □□ ISO 5211 bonnet mounting design (1/2” - 6”)
construction. Special body and trim materials such □□ API 607 qualified
as Alloy 20, Hastelloy® C, and others are available □□ API 608 compliance & grounding as standard (2” - 6”)
upon request. For applications involving chemicals,
□□ ISO 15848-1 Class BH rated (1/2” - 6”)
acids, caustics, and steam we recommend our
Xtreme® seat material, which provides superior life- □□ Standard materials meet requirements of NACE
cycle and sealing performance compared to virgin or MR0103 and MR0175 (See p29 & 30)
filled PTFE. We can accommodate nearly any special □□ SIL 3 qualified
customer or application specific requirement.
Emission-Pak® Valves
Fire-Tite® Valves Jamesbury Emission-Pak products feature a double
All Jamesbury Fire-Tite flanged ball valves are steam seal packing system to provide additional
qualified to API 607 and ISO 10497. This ensures sealing performance for critical services. This feature
minimal leakage in the event of a fire. is ISO 15848-1 Class AH rated.
CE marked Automated Assemblies

CE marked and documented product conforming Valves, actuators, and accessories designed to mate
to the European Pressure Equipment Directive together with precision ensures superior performance.
(PED) 2014/68/EU and ATEX Directive 2014/34/EU is
available as standard product.
B107-2 EN • 11/2018
B107-2 EN METSO
SPECIFICATIONS Valve Size Cv
Flow Data Inches DN Full Bore

1/2 15 9
The table at right provides flow coefficients for Jamesbury
3/4 20 50
valves covered in this bulletin. Cv values represent the flow
1 25 100
of water at +60°F through the valve in U.S. gallons per
1-1/2 40 270
minute at a pressure drop of 1 psi. The metric equivalent,
2 50 490
Kv, is the flow of water at +16°C through the valve in cubic
3 80 1160
meters per hour at a pressure drop of 1 kg/cm2. To convert
4 100 2200
Cv to Kv, multiply by 0.8569.
6 150 5100
8 200 9300
Valve Body Ratings 10 250 15,200
These are the maximum working pressure ratings of the 12 300 22,400
valve body only. The seat ratings, shown on the next 14 350 27,000
page, determine the practical temperature and pressure 16 400 37,000
limitations according to actual service conditions. Test 18 450 47,000
pressures are recommended pressures for hydrostatic test 20 500 60,000
with ball half open.
Maximum Working Pressure, psi

Class 150 Class 300
Temp °F Carbon 316 Stainless Carbon 316 Stainless
Alloy 20 Monel®
steel steel steel steel
-20 to 100 285 275 230 230 740 720
200 260 235 200 200 675 620
300 230 215 190 190 655 560
400 200 195 190 185 635 515
500 170 170 170 170 600 480
Test Pressure 450 425 350 350 1125 1100
Maximum Working Pressure, bar

Class 150 Class 300
Temp °C Carbon 316 Stainless Carbon 316 Stainless
Alloy 20 Monel
steel steel steel steel
-29 to 38 19.6 19.0 15.9 15.9 51.1 49.6
93 17.7 16.2 13.5 13.5 46.6 42.2
149 15.8 14.8 13.1 13.1 45.1 38.5
204 13.8 13.7 13.1 13.1 43.8 35.7
260 11.7 11.7 11.7 11.7 41.9 33.4
Test Pressure 30 29 24 24 77 75
Valve Seat Ratings

Seat ratings, indicated by solid lines in the charts on On saturated steam service, stainless steel trim is
the next page, are based on differential pressure with recomended at all pressures and is required above 200
the valve ball in the fully closed position and refer to psi (14 bar). See Bulletin B150-1. For more application
seats only. The dotted lines indicate maximum working information on seat materials, refer to Bulletin T140-1.
pressures for WCB carbon steel valve bodies. (Maximum
working pressures of other body materials are shown in Xtreme Performance and Value
the tables above.) The combination of dotted and solid Xtreme seats provide longer life, expanded performance
lines indicates the maximum valve rating at specific boundaries, and the greatest possible value. Xtreme is a
pressure and temperature conditions. Valves with PTFE, unique material that resulted from a technological break-
Xtreme, PEEK®, PFA, and UHMW polyethylene seats can through in our polymer research lab. The material is a
be used in service to -60°F (-51°C) provided that the valve fluoropolymer based blend proprietary to Jamesbury that
body material is suitable for such a temperature. Carbon provides superior quarter-turn performance.
steel valves are rated to -20°F (-29°C).
2 TECHNICAL BULLETIN 11/18

F L A N G E D B A L L VA LV E S A S M E C L A S S 1 50 & 3 0 0 B107-2 EN
1/2” – 1-1/2” (DN 15 – 40) Full Bore 2” – 4” (DN 50 – 100) Full Bore
Temperature °C Temperature °C
0 50 100 150 200 250 300 350 -50 0 50 100 150 200 250 300
800 800
Low Temperature Limit
for Carbon Steel (WCB) 50
700 50
700 Saturated
Maximum Differential Pressure, bar

Maximum Differential Pressure, psi
Class 300 Steam

600 X

40

Z Class 150 600 Class 300 40
500
Saturated T B
Steam 30 500
400 Z
T U 30
400
300
20
200 B L 300 20
U
10
100 200 Class 150
10
X
100 L
-60 0 100 200 300 400 500 600 700
5
Temperature °F
0
-60 0 100 200 300 400 500 600
-20 Temperature °F
6” (DN 150) Full Bore Non-Trunnion

Temperature °C
0 100 200 300
300 20
Trunnion Valves
Saturated
200 Steam 6” – 24”(DN 150 – 600) Full Bore
T Z 10 Temperature °C
B
100 -50 0 50 100 150 200 250
U 800
X 0 Class 300
0 50
-60 0 100 200 300 400 500 600 700
Temperature °F

* ASME Class 300 Non-Trunnion is 275 psi (19 bar) max.
600 40
X
500
30
8” (DN 200) Full Bore Non-Trunnion 400
Temperature °C
300 T
0 100 200 300 20
300 20
Class 150 & 300
Saturated 200
200 Steam
Class 150 10
10
T&B 100
100
U Z Saturated
X Steam
0 0
-60 0 100
200 300 400 500 600 -60 0 100 200 300 400 500
Temperature °F -20 Temperature °F
* ASME Class 300 Non-Trunnion is 275 psi (19 bar) max.
LEGEND:
T = PTFE U = UHMW B = PFA
L = PEEK Z = TFM X = Xtreme
TECHNICAL BULLETIN 11/18 3

B107-2 EN METSO
The Ultimate Process Automation Package for VPVL Pneumatic Actuators,

V-Series, ADC-Series and QX-Series Electric Actuators
With 1/2” – 6” (DN 15 – 150) Full Port Series 9000
Digital valve communication terminals

for full automation capability
Available for general purpose

and hazardous duty service
Cast 300 Series SS brackets

for corrosion resistance
17-4PH SS coupling for Patented stem seal

strength and corrosion has 3 engineered sealing zones
resistance to provide multiple
Fully guided stem, coupling barriers for long term
and precision bracket as- sealing (1/2”-1 1/2”).
Compression plate and disc
sures optimum form, fit
springs for high cycle thermal
and performance
and pressure transients.
2 3
2
1 1
Automation Performance and Value

Valves combined with Jamesbury actuators offer a total and Hawkeye® digital monitors or VCTs, the packages
value and performance package. Available with pneu- have a wide range of applications. Visit our website at:
matic Valv-Powr® VPVL actuators, V-Series, ADC-Series www.metso.com/valves
and QX-Series electric actuators and with StoneL® Quartz®

DIMENSIONS
1/2” – 1-1/2” (DN15 – 40) Series 9150 ASME Class 150 and
Series 9300 ASME Class 300 (Non-Trunnion)
4 Holes øL on a øM Bolt Circle
17
25, 26 1
16, 19
20, 29, 31
K
8
øR 4 6
J
7, 13 øE Port Dia.
F G H
øC
øN Thru Both Ends
P No. of Holes
2
3 5
øD Bolt Circle
T
Typ. Both Ends
B Hex Size X
A
Valve Size Series 9150 ASME Class 150 Approximate Dimensions - inches Hex ISO Approx
inches A B C D E F G H J K L M N P R S T Size Bonnet Weight lb
1/2 4.25 1.94 3.50 2.38 0.50 1.06 1.33 1.63 3.38 5.00 M5 1.42 0.62 4 0.31 0.18 0.50 0.50 F03 3.5
3/4 4.63 2.19 3.88 2.75 0.88 1.65 2.04 2.58 3.69 6.50 M5 1.65 0.62 4 0.50 0.31 0.63 0.88 F04 10
1 5.00 2.19 4.25 3.12 1.00 1.78 2.17 2.71 3.94 6.50 M5 1.65 0.62 4 0.50 0.31 0.63 1.00 F04 13
1-1/2 6.50 2.64 5.00 3.88 1.50 2.26 2.78 3.49 4.46 8.00 M6 1.97 0.62 4 0.62 0.37 0.69 1.50 F05 17
Valve Size Series 9150 ASME Class 150 Approximate Dimensions - mm Hex ISO Approx
DN A B C D E F G H J K L M N P R S T Size Bonnet Weight kg
15 108 49 89 60 13 27 34 41 86 127 M5 36 16 4 8 5 13 13 F03 1.6
20 118 56 99 70 22 42 52 66 94 165 M5 42 16 4 13 8 16 22 F04 4.5
25 127 56 108 79 25 45 55 69 100 165 M5 42 16 4 13 8 16 25 F04 5.9
40 165 67 127 99 38 57 71 89 113 203 M6 50 16 4 16 9 18 38 F05 7.7
Valve Size Series 9300 ASME Class 300 Approximate Dimensions - inches Hex ISO Approx
inches A B C D E F G H J K L M N P R S T Size Bonnet Weight lb
1/2 5.50 1.94 3.75 2.62 0.50 1.06 1.33 1.63 3.38 5.00 M5 1.42 0.62 4 0.31 0.18 0.56 0.50 F03 6
3/4 6.00 2.19 4.63 3.25 0.88 1.65 2.04 2.58 3.69 6.50 M5 1.65 0.75 4 0.50 0.31 0.63 0.88 F04 13
1 6.50 2.19 4.88 3.50 1.00 1.78 2.17 2.71 3.94 6.50 M5 1.65 0.75 4 0.50 0.31 0.69 1.00 F04 17
1-1/2 7.50 2.64 6.13 4.50 1.50 2.26 2.78 3.49 4.46 8.00 M6 1.97 0.88 4 0.62 0.37 0.81 1.50 F05 22
Valve Size Series 9300 ASME Class 300 Approximate Dimensions - mm Hex ISO Approx
DN A B C D E F G H J K L M N P R S T Size Bonnet Weight kg
15 140 49 95 67 13 27 34 41 86 127 M5 36 16 4 8 5 14 13 F03 2.7
20 152 56 118 83 22 42 52 66 94 165 M5 42 19 4 13 8 16 22 F04 5.9
25 165 56 124 89 25 45 55 69 100 165 M5 42 19 4 13 8 18 25 F04 7.7
40 190 67 156 114 38 57 71 89 113 203 M6 50 22 4 16 9 21 38 F05 10.0
5
TECHNICAL BULLETIN 11/18
B107-2 EN METSO
BILLS OF MATERIALS AND PARTS LIST

Fire-Tite 1/2” – 1-1/2” (DN15 – 40) Full Port Series 9000 Valves
Body Material
Part No. Part Name Carbon Steel 316 Stainless Steel Alloy 20 Monel
(22) (36) (35) (71)
Carbon Steel ASTM A216 316 Stainless Steel ASTM Alloy 20 ASTM A351
1 Body Monel ASTM A494 M35-1
Type WCB A351 Type CF8M Type CN7M
2 Insert Monel ASTM A494 M35-1
Monel, Hastelloy C as
3 Ball 316 Stainless Steel, Monel, Hastelloy C Alloy 20
specified
4 Stem 316 Stainless Steel, 17-4PH, Monel, Hastelloy C Alloy 20
specified
5 Seat PTFE, Xtreme, PFA
6 Body Seal TFM
7 Secondary Stem Seal Graphite
8 Primary Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PFA seats)
13 Stem Bearing PTFE, Filled PTFE
16 Hex Nut Carbon Steel (zinc plated) 300 Series Stainless Steel
17 Handle Carbon Steel (zinc plated) 300 Series Stainless Steel
19 Lock Washer Carbon Steel (zinc plated) 300 Series Stainless Steel
20 Compression Plate 316 Stainless Steel Monel
22 Identification Tag Stainless Steel
23 Pop Rivet Stainless Steel
25 Socket Cap Screw 300 Stainless Steel
26 Handle Stop Screw 300 Stainless Steel
29 Hex Cap Screw 300 Stainless Steel Monel
31 Disc Springs Inconel®

Non-Fire-Tite 1/2” – 1-1/2” (DN15 – 40) Full Port Series 9000 Valves
Body Material
(22) (36) (35) (71)
Carbon Steel ASTM A216 316 Stainless Steel ASTM Alloy 20 ASTM A351 Type
Type WCB A351 Type CF8M CN7M
specified
specified
5 Seat PTFE, Xtreme, PFA, PEEK1 & UHMWPE
6 Body Seal TFM (w/ PTFE, Xtreme, PFA seats) , UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats)
8 Primary Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PFA seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats)
10 Stem Guide PEEK (PEEK seated valves)
24 Stem Bearing PTFE (w/ PTFE seats), Filled PTFE (w/ Xtreme & PFA seats), PEEK (w/ PEEK seats), UHMWPE (w/ UHMWPE seats)
31 Disc Springs Inconel
Note 1: 17-4 PH stems required with PEEK seats

DIMENSIONS
2”– 6” (DN50 – 150) Series 9150 ASME Class 150 and

2”– 4” (DN50 – 100) Series 9300 ASME Class 300 (Non-Trunnion)
L M Bolt Circle
23
22
R
13 24 S
4
7
72
29
70 13
30
20 Fire-Tite Non Fire-Tite 31
8
2 H
71
C Typ. E Port
D = Bolt Circle
5 3 6 33 32
N = Size of holes
T
B P = Number of holes
Typ.
A
Series 9150 ASME Class 150 Approximate Dimensions - inches

Valve Size ISO Weight
A B C D E F H L M N P R S T
inches Pattern lb
2 7.00 4.14 6.00 4.75 2.00 3.09 5.16 M8 2.76 0.75 4 0.86 0.62 0.62 F07 29
3 8.00 4.26 7.50 6.00 3.00 3.90 5.95 M8 2.76 0.75 4 0.86 0.62 0.75 F07 49
4 9.00 4.50 9.00 7.50 4.00 5.51 8.24 M10 4.02 0.75 8 1.11 0.81 0.94 F10 89
6 15.50 8.25 11.00 9.50 6.00 7.27 10.37 M12 4.92 0.88 8 1.61 1.12 1.00 F12 244
Series 9150 ASME Class 150 Approximate Dimensions - mm

DN Pattern kg
50 178 105 152 121 51 78 131 M8 70 19 4 22 16 16 F07 13
80 203 108 191 152 76 99 151 M8 70 19 4 22 16 19 F07 22
100 229 114 229 191 102 140 209 M10 102 19 8 28 21 24 F10 40
150 394 210 279 241 152 185 263 M12 125 22 8 41 28 25 F12 111

inches Pattern lb
2 8.50 4.89 6.50 5.00 2 3.09 5.16 M8 2.76 0.75 4 0.86 0.62 0.87 F07 37
3 11.12 6.11 8.25 6.62 3 4.69 7.40 M10 4.02 0.88 8 1.11 0.81 1.12 F10 77
4 12.00 6.86 10.00 7.88 4 5.66 8.75 M12 4.92 0.88 8 1.61 1.12 1.25 F12 136

DN Pattern kg
50 216 124 165 127 51 78 131 M8 70 19 4 22 16 22 F07 17
80 282 155 210 168 76 119 188 M10 102 22 8 28 21 28 F10 35
100 305 174 254 200 102 144 222 M12 125 22 8 41 28 32 F12 62
7
B107-2 EN METSO

Fire-Tite 2” - 6” (DN50 - 150) Full Port Series 9150 Valves, 2” - 4” (DN50 - 100) Full Port Series 9300 Valves
Body Material
(22) (36) (35) (71)
2 Body Cap Monel ASTM A494 M35-1
specified
2 Monel, Hastelloy C as
specified
Spiral Wound Graphite/ Spiral Wound Graphite/
6 Body Seal1 Spiral Wound Graphite/316 Stainless Steel
Alloy 20 Monel
8 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PFA seats)
13 Thrust Bearing PTFE, Filled PTFE
20 Compression Plate1 316 Stainless Steel Monel
29 Bonnet Stud ASTM A193 GR. B8, B8C, B8T or B8M, Monel
30 Bonnet Stud Nut ASTM A194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel
32 Body Stud ASTM A193 GR. B8, B8C, B8T or B8M, Monel
33 Body Stud Nut ASTM A194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel
70 Top Grounding Spring Stainless Steel
Bottom Grounding
71 Inconel
Spring
72 Retaining Ring Stainless Steel

Non-Fire-Tite 2” - 6” (DN50 - 150) Full Port Series 9150 Valves, 2” - 4” (DN50 - 100) Full Port Series 9300 Valves
Body Material
(22) (36) (35) (71)
specified
specified
2, UHMWPE
5 Seat PTFE, Xtreme, PFA, PEEK
Spiral Wound PTFE/ Spiral Wound PTFE/
6 Body Seal Spiral Wound PTFE/316 Stainless Steel
Alloy 20 Monel
Bottom Grounding
71 Inconel
Spring
Note 1: Compression plate and body seal are Monel for valves with Monel or Hastelloy C trim.
Note 2: 17-4PH stems are required with PEEK seats.

DIMENSIONS
8” (DN 200) Series 9150 ASME Class 150 and

6” - 8” (DN150 - 200) Series 9300 ASME Class 300 (Non-Trunnion)
8 S
W 13 10
ØN
70 18 14 5
71
19 36 69 70
9 66
65 16 R
12
2
G
K
ØC Typ.
EØ Port
1 7 3
T
Typ. B
D = Bolt circle
l = Size of holes
A
M = Number of holes
8” 9300 also available in long version (930L) with 19.750 face-to-face dimension.
Valve Size Series 9150 ASME Class 150 Approximate Dimensions - inches Weight
inches A B C D E G K L M N R S T U V W lb
8 18.00 8.97 13.50 11.75 8.00 15.60 10.22 0.88 8 2.54 2.88 1.82 1.18 9.06 3.54 1-8 300
Valve Size Series 9150 ASME Class 150 Approximate Dimensions - mm Weight
DN A B C D E G K L M N R S T U V W kg
200 457 228 343 298 203 369 260 22 8 65 76 46 30 230 90 1-8 136

Valve Size Series 9300 & 930L ASME Class 300 Approximate Dimensions - inches Weight
inches A B C D E G K L M N R S T U V W lb
6 15.88 8.84 12.50 10.63 6.00 12.07 7.74 0.88 12 1.95 2.76 1.39 1.50 9.06 3.54 1-8 327
8 16.50 8.82 15.00 13.00 8.00 15.60 10.22 1.00 12 2.54 2.88 1.82 1.64 9.06 3.54 1-8 560
Series 9300 & 930L ASME Class 300 Approximate Dimensions - mm

Valve Size Weight
DN A B C D E G K L M N R S T U V W kg
150 403 225 318 270 152 307 197 22 12 50 70 35 38 230 90 1-8 149
200 419 209 381 336 203 396 260 25 12 65 73 46 42 230 90 1-8 255
* Screw-thread dimensions are in inches

B107-2 EN METSO

8” (DN 200) Series 9150, 6” & 8” (DN 150 & 200) Series 9300 & 930L (Non-Trunnion)
Part Body Material
Part Name
No. Carbon Steel 316 Stainless Steel
1 Body Carbon steel ASTM A216 Gr WCB 316 Stainless steel ASTM A351 Gr CF8M
2 Body Cap Carbon steel ASTM A216 Gr WCB 316 Stainless steel ASTM A351 Gr CF8M
3 Ball 316 Stainless steel, Alloy 20, Monel1 , Hastelloy C1 - as specified
5 Stem 316 Stainless steel, Monel1 , Hastelloy C1, 17-4 PH - as specified
7 Seat Xtreme, PTFE
8 Stem Retainer Carbon steel Stainless steel
9 Gland Follower1 Carbon steel, Stainless steel, Monel1
10 Compression Plate1 Stainless steel, Monel1
12 Body Stud ASTM A193 Gr B7; Gr B7M; Gr B8, B8C, B8T or B8M
13 Stem Retainer Cap Screw ASTM A193 Gr B7; Gr B7M; Gr B8, B8C, B8T or B8M
14 Stud ASTM A193 Gr B7; Gr B7M; Gr B8, B8C, B8T or B8M
16 Nut ASTM A194 Gr 24; Gr 2HM; Gr 8B, 8CB, 8MB, 8TB, 8FB
18 Nut ASTM A194 Gr 2H; Gr 2HM; Gr 8B, 8CB, 8MB, 8TB, 8FB
19 Identification Tag Stainless steel
36 Grounding Spring Inconel
37 Caution Tag PTFE
65 Body Gasket1 Spiral Wound PTFE / 316 Stainless steel1
66 Stem Retainer1 Spiral Wound PTFE / 316 Stainless steel1
69 Packing PTFE, molecularly enhanced PTFE (Xtreme-seated valves)
70 Stem Bearing PTFE
Note 1: Compression plate, body gasket, stem retainer, and gland follower are Monel for valves with Monel or Hastelloy C trim.

DIMENSIONS
8” - 12” (DN200 - 300) Series 9150 ASME Class 150 and

6” - 12” (DN150 - 300) Series 9300 ASME Class 300 (Trunnion)
X U
U
V V
View Z–Z
ØN W 8 S
W 8 13 10 13 10
10” & 12” (DN 250& 300) Class 150 & 300 8” (DN 250) Class 150
6” & 8” (DN 150 & 200) Class 300
ØN X
70 18 14 5
71
19 69
9 66 70
65 16 12 2 R
G
K
ØC Typ.
ØE Port
7
1 91 92 3 89
T X
Typ. B
D = Bolt circle
A L = Size of holes
M = Number of holes
8” 9300 also available in long version (930L) with 19.750 face-to-face dimension.
Valve Size Series 9150 ASME Class 150 Approximate Dimensions – inches Weight
inches A B C D E G K L M N R S T U V W X lb
8 18.00 8.97 13.50 11.75 8.00 15.60 10.22 0.88 8 2.54 2.88 1.82 1.18 9.06 3.54 1-8 N/A 300
10 21.00 10.90 16.00 14.25 10.00 23.39 11.82 1.00 12 2.76 3.38 N/A 1.19 12.10 4.72 11⁄4-7 12.99 710
12 24.00 11.96 19.00 17.00 12.00 25.11 13.44 1.00 12 3.00 3.63 N/A 1.25 12.10 4.72 11⁄4-7 12.99 1089
Valve Size Series 9150 ASME Class 150 Approximate Dimensions – mm Weight
DN A B C D E G K L M N R S T U V W* X kg
200 457 228 343 298 203 370 260 22 8 65 76 35 30 230 90 1-8 N/A 136
250 533 276 406 362 254 594 300 25 12 70 86 N/A 30 307 120 11⁄4-7 330 322
300 610 304 483 432 305 638 341 25 12 76 92 N/A 32 307 120 11⁄4-7 330 494
Valve Size Series 9300/930L ASME Class 300 Approximate Dimensions – inches Weight
inches A B C D E G K L M N R S T U V W X lb
6 15.88 8.84 12.50 10.63 6.00 12.07 7.74 0.88 12 1.95 2.76 1.39 1.50 9.06 3.54 1-8 N/A 310
8 16.50 8.26 15.00 13.00 8.00 15.60 10.22 1.00 12 2.54 3.00 1.82 1.64 9.06 3.54 1-8 N/A 560
10 22.38 12.19 17.50 15.25 10.00 23.39 11.82 1.13 16 2.75 3.38 2.75 1.88 12.10 4.72 11⁄4-7 12.99 968
12 25.50 14.02 20.50 17.75 12.00 25.11 13.44 1.25 16 3.00 3.63 3.00 2.00 12.10 4.72 11⁄4-7 12.99 1496
Valve Size Series 9300/930L ASME Class 300 Approximate Dimensions – mm Weight
DN A B C D E G K L M N R S T U V W* X kg
150 403 225 318 270 152 307 197 22 12 50 70 35 38 230 90 1-8 N/A 141
200 419 210 381 336 203 396 260 25 12 65 76 46 42 230 90 1-8 N/A 255
250 568 310 445 387 254 594 300 29 16 70 86 70 48 307 120 11⁄4-7 330 439
300 648 356 521 451 305 638 341 32 16 76 92 76 51 307 120 11⁄4-7 330 679
11
B107-2 EN METSO

Series 9150, 6” – 12” (DN 150 – 300) Series 9300 (Trunnion)
Part Body Material

Part Name
No. Carbon Steel (22) All Series 316 Stainless Steel (36) All Series
1 Body Carbon steel ASTM A216 Gr WCB 316 Stainless steel ASTM A351 Gr CF8M
2 Body Cap Carbon steel ASTM A216 Gr WCB 316 Stainless steel ASTM A351 Gr CF8M
3 Ball 316 Stainless steel, Alloy 20, Monel1, Hastelloy C1 - as specified
5 Stem 316 Stainless steel, Monel1, Hastelloy C1, 17-4 PH - as specified
7 Seat Xtreme, PTFE - as specified
8 Stem Retainer Carbon steel ASTM A216 Gr WCB Stainless steel ASTM A351 Gr CF8M
9 Gland Follower1 Carbon Steel, Stainless steel, Monel1
10 Compression Plate1 Stainless steel, Monel1
12 Body Stud ASTM A193 Gr B7; Gr B7M; Gr B8, B8C, B8T or B8M
13 Stem Retainer Bolt ASTM A193 Gr B7; Gr B7M; Gr B8, B8C, B8T or B8M
14 Stud ASTM A193 Gr B7; Gr B7M; Gr B8, B8C, B8T or B8M
16 Nut ASTM A194 Gr 24; Gr2HM; Gr 8B, 8CB, 8MB, 8TB, 8FB
18 Nut ASTM A194 Gr 2H; Gr 2HM; Gr 8B, 8CB, 8MB, 8TB, 8FB
23 Rivet Stainless steel
36 Grounding Spring2 Inconel
65 Body Gasket1 Spiral Wound PTFE / 316 Stainless steel1
66 Stem Retainer Seal1 Spiral Wound PTFE / 316 Stainless steel1
69 Packing PTFE, molecularly enhanced PTFE (Xtreme-seated valves)
70 Stem Bearing Filled PTFE
89 Trunnion Carbon Steel Stainless steel
91 Bearing Spacer Filled PTFE
92 Trunnion Bearing 316 Stainless steel
Note 1: Compression plate, body gasket, stem retainer gasket, and gland follower are Monel for valves with Monel or Hastelloy C trim.
Note 2: For grounded valves only.

DIMENSIONS
14” – 24” (DN350 – 600) Series 9150 ASME Class 150 and Series 9300 ASME Class 300 (Trunnion)
W
W
UU W
W
U
U
VV
VV
ØNN
4 33
7
8 20 21 14
29 18
36 30 25
23 RR
22 32 2
6 G
G
35
KK
Ø
C
C ØEE
TYP.
TYP
Port
PORT
1
3
T
T
TYP.
TYP 27 28 10 D = Bolt circle
11 L = Size of holes
5 26 M = Number of holes
BB
AA
inches A B C D E G K L M N R T U V W lb
14 27.00 14.25 21.00 18.75 13.25 24.21 13.88 1.13 12 3.00 3.25 1.31 11.13 5.30 3/4-10 1470
16 30.00 16.50 23.50 21.25 15.25 25.88 15.25 1.13 16 3.00 3.25 1.38 11.13 5.30 3/4-10 1900
18 34.00 18.00 25.00 22.75 17.25 26.82 17.38 1.25 16 3.50 4.00 1.5 13.00 7.00 3/4-10 2800
20 36.00 19.38 27.50 25.00 19.25 29.13 18.25 1.25 20 3.50 4.00 1.62 15.00 7.00 3/4-10 3500
24 42.00 21.06 32.00 29.50 23.25 31 20.00 1.38 20 3.75 4.00 1.81 15.00 7.00 7/8-9 on application
DN A B C D E G K L M N R T U V W* kg
350 686 362 533 476 337 615 353 29 12 76 83 33 254 83 3/4-10 667
400 762 419 597 540 387 657 387 29 16 76 83 35 283 135 3/4-10 862
450 864 457 635 578 438 681 441 32 16 89 102 38 330 178 3/4-10 1270
500 914 492 699 635 489 740 464 32 20 89 102 41 330 178 3/4-10 1588
600 1067 535 813 749 590 787 508 35 20 95 102 46 381 178 7/8-9 on application
inches A B C D E G K L M N R T U V W lb
14 30.00 17.25 23.00 20.25 13.25 24.94 14.00 1.25 20 3.50 4.00 2.06 13.00 7 3/4-10 2000
16 33.00 17.63 25.50 22.50 15.25 26.12 15.19 1.38 20 3.50 4.00 2.19 13.00 7 3/4-10 2480
18 36.00 19.28 28.00 24.00 17.25 28.78 15.13 1.38 24 3.50 4.50 2.31 15.00 7 7/8-9 3400
20 Contact Factory on application
24 45.00 22.50 36.00 32.00 23.25 32 21.06 1.63 24 3.75 4.63 2.69 15.00 7 7/8-9 on application
DN A B C D E G K L M N R T U V W* kg
350 762 438 584 514 336 633 356 32 20 89 102 52 330 178 3/4-10 907
400 838 448 648 572 387 663 386 35 20 89 102 56 330 178 3/4-10 1125
450 914 490 711 610 438 731 384 35 24 89 114 59 381 178 7/8-9 1542
500 Contact Factory on application
600 1143 572 914 813 590 813 535 41 24 95 118 68 381 178 7/8-9 on application
13
B107-2 EN METSO
14” – 24” (DN 350 – 600) Series 9150, 14” – 24” (DN 350 – 600) Series 9300 Full-Bore Valves
Part Body Material

Part Name
No. Carbon Steel (22) All Series 316 Stainless Steel (36)
1 Body Carbon steel ASTM A216 Type WCB 316 stainless steel ASTM A351 Type CF8M
2 Body Cap Carbon steel ASTM A216 Type WCB 316 stainless steel ASTM A351 Type CF8M
3 Ball Alloy 20, 316 Stainless steel, Monel1, Hastelloy C1 - as specified
4 Stem Alloy 20, 316 Stainless steel, Monel1, Hastelloy C1 -as specified
5 Seat PTFE or filled PTFE
6 Body Seal1 Spiral wound PTFE/316 Stainless steel1
8 Stem Bearing Filled PTFE
10 Body Stud ASTM A193 Gr. B7; Gr. B7M; or Gr. B8, B8C, B8T or B8M
11 Nut ASTM A194 Gr. 2H; Gr. 2HM; or Gr. 8B, 8CB, 8MB, 8TB , or 8FB
14 Hex Head Cap Screw ASTM A193 Gr. B7; Gr. B7M; or Gr. B8, B8C, B8T or B8M
18 Nut ASTM A194 Gr. 2H; Gr. 2HM; or Gr. 8B, 8CB, 8MB, 8TB , or 8FB
20 Compression Plate1 Carbon steel Stainless steel
21 Compression Ring Stainless steel
23 Drive Screw Stainless steel
25 Stem Retainer Seal Graphite
26 Trunnion Plate Carbon steel Type WCB 316 Stainless steel Type CF8M
27 Trunnion Bearing 316 Stainless steel backed glass-filled PTFE
28 Bearing Spacer Filled PTFE
29 Hex.Hd. Cap Screw ASTM A193 Gr. B7; Gr. B7M
30 Stem Retainer Carbon steel Type WCB 316 Stainless steel Type CF8M
32 Upper Stem Seal PTFE
33 Key Carbon steel
35 Trunnion Ring2 Carbon steel Stainless steel
36 Tag: Trunnion Ball Stainless steel
Note 1: Compression plate, body seal, and gland follower are Monel for valves with Monel or Hastelloy C trim.
Note 3: Not used in 14” & 16” (DN 350 & 400) Series 9300 valves.

STANDARD VALVE TORQUE DATA

Use these torque charts as a guide for actuator selection. Manual Gear Actuators A100-1
Additional requirements may be imposed by media B-Series Piston Actuators 6B20
characteristics, trim, and frequency of valve operation. For Quadra-Powr X Spring Diaphragm
clean lubricating fluid service, required torque for PTFE (T),
Rotary Actuators A110-4
Xtreme (X) and filled PTFE (M) seated valves only may be
reduced 20% when the valve is equipped with corrosion Valv-Powr Series VPVL A111-5
resistant trim. For difficult services such as slurries and VPVL Stainless Steel A111-4
semi-solids, and for oxygen, increase values by 50%. If in V-Series Electric Actuators V200-1
doubt, err on the side of safety by using a larger actuator ADC Electric Actuators V201-1
than would normally be selected. LC Series’ Electric Actuators V202-1 & V203-1
Torque output values and actuator selection tables for ESR-Series Electric Actuators V204-1
the different types of Jamesbury actuators are contained
Q6-Series Electric Actuators V205-1
in the bulletins listed below.
QX-Series Electric Actuators V 207-1
ASME Class 150 and 300 Standard Valve Torque Data

PTFE (T) Seated Valves Xtreme (X) and TFM (Z) Seated Valves
1/2” – 12” (DN 15 – 300)
Maximum Differential Pressure, bar Maximum Differential Pressure, bar
10 20 30 40 50 60 10 20 30 40 50 60
20,000 10000
24” (DN 600) 8000 5000
7000
6000
10,000 5000
8000 20” (DN 500) 4000
10,000
6000 18” (DN 450)
3000 12” (DN 300) Trunnion 4000
5000 16” (DN 400)
4000 14” (DN 350) 2000 10” (DN 250) Trunnion
3000 4000
8” (DN 200) 2000
12” (DN 300) Non-Trunnion
2000 (See Note 4) 8” ( DN 200) Trunnion
10” (DN 250) 1000
8” (DN 200) 2000 800 1000
Trunnion 700
1000 6” (DN 150) Trunnion
600
800 500
Recommended Actuator Torque, FT•LBS
8” (DN 200) 6” (DN 150) 1000 4” (DN 100)

Recommended Actuator Torque, N•m

600 Non-Trunnion Trunnion 400 6” (DN 150) 500
500 (See Note 4) Non-Trunnion

300 (See Note 4)
400
6” (DN 150) 500 300
300 Non-Trunnion 3” (DN 80)
4” (DN 100)
200
(See Note 4)
300
200 200
200 100
3” (DN 80)
100 80 100
70 2” (DN 50)
80 60
100
60 50
50 40
2” (DN 50) 1-1/2” (DN 40)
50
40
50 30
30 1-1/2” (DN 40)
20
20
20
1” (DN 25) 20 1” (DN 25)
10 10
3/4” (DN 20)
8 3/4” (DN 20) 8 10
10 7
6 6
5 5
4 4
5 5
3 1/2” (DN 15) 1/2” (DN 15)
3
2
2
1
0 100 200 300 400 500 600 700 800 900 1
0 100 200 300 400 500 600 700 800 900 1000
Note: See notes on page 16.

B107-2 EN METSO
STANDARD VALVE TORQUE DATA

ASME Class 150 and 300 Valves
PEEK (L) Seated Valves 1/2” – 6” (DN 15 – 150)

10 20 30 40 50
1000
800 1000
4” (DN 100)
600
See Note 1 700
500
400 3” (DN 80)
500
300
2” (DN 50)

300
200
See Note 2 200 UHMW Polyethylene (U) Seated Valves

100 Maximum Differential Pressure, bar
1-1/2” (DN 40) 10 20 30 40 50 60
80 100 20,000
60 24” (DN 600)
50
40 10,000
50 8000 20” (DN 500)
30 10,000
1” (DN 25)
6000 18” (DN 450)
5000 16” (DN 400)
20 4000
3/4” (DN 20) 14” (DN 350)
20 3000 4000
12” (DN 300)
10 2000
10” (DN 250)
8 1/2” (DN 15)

10 8” (DN 200) 2000
6 Trunnion
1000
5
0 100 200 300 400 500 600 700 800 800 8” (DN 200) 1000
Non-Trunnion 6” (DN 150)
Maximum Differential Pressure, psi 600 Trunnion
500 (See Note 4)
400
6” (DN 150) 500
PFA (B) Seated Valves 1/2” – 8” (DN 15 – 200) 300 Non-Trunnion
4” (DN 100)
(See Note 4)
Maximum Differential Pressure, bar 200
300
10 20 30 40 50
1100
8” (DN 200) 200
3” (DN 80)
1000 100
600 6” (DN 150)
80
500 2” (DN 50)
100
60
400 See Note 1 50
4” (DN 100) 500 1-1/2” (DN 40)
300 40
50
30
300
200 See Note 3
20
3” (DN 80) 1” (DN 25) 20
200
3/4” (DN 20)
100 10
80 8 1/2” (DN 15)
100 10
60 6
5
50 2” (DN 50) 0 100 200 300 400 500 600 700 800 900
40 Maximum Differential Pressure, psi
1-1/2” (DN 40)
50
30
Note 1: Actuator is required;
20 Note 2: Actuator is required for difficult service;
Note 3: Actuator is required for difficult service and pressure greater than 500 psi.
1” (DN 25) 20 Note 4: Dashed line indicates Non-Trunnion and is rated to Class 150 only for seats.
10
3/4” (DN 25)
8
10
6
1/2” (DN 15)
5
4
0 100 200 300 400 500 600 700 800

EMISSION-PAK SERIES 9000 BALL VALVES AVAILABLE CONFIGURATIONS

The Emission-Pak provides additional protection from Full Bore Valves
emissions and stem seal leakage, and the ability to monitor Valve Size Range ASME Class
leakage for critical applications. 9150, 9180 1/2” – 6” (DN 15 – 150) 150
The Emission-Pak is an extended stem retainer containing 9300, 9380 1/2” – 4” (DN 15 – 100) 300
two sets of stem seals which is mounted in the valve body.
A special TFM and graphite gasket maintains a leak-fee
joint and assures that a Fire-Tite valve retains its fire tested
rating.
FEATURES
□□ Two separate live loaded v-ring stem seals
□□ One piece stem
□□ Two thrust bearings
□□ Optional stem seal monitoring port permits detection
of primary stem seal wear or leakage
□□ ISO 15848-1 Class AH rated
1/2” - 1-1/2” (DN15 - 40) Series 9000 with Emission-Pak
Lockable Handle as
Standard
Bonnet accepts standard handle kit,
accessories and actuators
Double packed and live loaded

stem seals provide consistent
packing force, resists thermal
and pressure transients and
extends valve life
TFM / graphite body seal and
gasket provides superior bon-
net to stem retainer interface
and sealing performance to
API-607 and ISO 15848-1
Optional monitoring port that

allows padding of the lantern
area or instrumentation to detect
migrating liquids or gases.
Qualification Test
Emission-Pak 1/2” - 1-1/2” (DN 15 – 40) 9000 series are qualified to ISO 15848-1 AH-CC3-SSA1-T200.
17
B107-2 EN METSO
DIMENSIONS
1/2” – 1-1/2” (DN15 – 40) Series 9150 ASME Class 150 and
Series 9300 ASME Class 300 with Emission-Pak (Non-Trunnion)
W
V
103
104
S U
®
H
16
17
19
4 104 25
29 26
31
102 20 106
101 13 Fire-Tite 7
J G Port Dia.
K R
105
13 øE
øC Non-Fire-Tite & Hex Size
24
22
5 5 2
1 ØL Thru Both
3 6 T ØD Bolt Circle
Ends
B Typ. Both Ends
M No. of Holes
A

Valve Size Series 9150 Emission-Pak ASME Class 150 Approximate Dimensions - inches ISO
inches A B C D E G H J K L M N R S T U V W Bonnet
1/2 4.25 1.94 3.50 2.38 0.50 3.61 5.00 4.42 3.08 0.62 4 0.31 3.30 0.18 0.50 1.002 1.002 M5 F03
3/4 4.63 2.19 3.88 2.75 0.88 4.85 6.50 5.60 3.95 0.62 4 0.50 4.30 0.31 0.63 1.168 1.168 M5 F04
1 5.00 2.19 4.25 3.12 1.00 4.98 6.50 5.73 4.08 0.62 4 0.50 4.43 0.31 0.63 1.168 1.168 M5 F04
1-1/2 6.50 2.64 5.00 3.88 1.50 5.99 8.00 6.97 4.81 0.62 4 0.62 5.26 0.37 0.69 1.392 1.392 M6 F05
Valve Size Series 9150 Emission-Pak ASME Class 150 Approximate Dimensions - mm ISO
DN A B C D E G H J K L M N R S T U V W Bonnet
15 108 49 89 60 13 92 127 112 78 16 4 8 84 5 13 25 25 M5 F03
20 118 56 99 70 22 123 165 142 100 16 4 13 109 8 15 30 30 M5 F04
25 127 56 108 79 25 126 165 146 104 16 4 13 113 8 15 30 30 M5 F04
40 165 67 127 99 38 152 203 177 122 16 4 16 134 9 18 35 35 M6 F05
Valve Size Series 9300 Emission-Pak ASME Class 300 Approximate Dimensions - inches ISO
inches A B C D E G H J K L M N R S T U V W Bonnet
1/2 5.50 1.94 3.75 2.62 0.50 3.61 5.00 4.42 3.08 0.62 4 0.31 3.30 0.18 0.52 1.002 1.002 M5 F03
3/4 6.00 2.19 4.63 3.25 0.88 4.85 6.50 5.60 3.95 0.75 4 0.50 4.30 0.31 0.63 1.168 1.168 M5 F04
1 6.50 2.19 4.88 3.50 1.00 4.98 6.50 5.73 4.08 0.75 4 0.50 4.43 0.31 0.63 1.168 1.168 M5 F04
1-1/2 7.50 2.64 6.13 4.50 1.50 5.99 8.00 6.97 4.81 0.88 4 0.62 5.26 0.37 0.71 1.392 1.392 M6 F05
Valve Size Series 9300 Emission-Pak ASME Class 300 Approximate Dimensions - mm ISO
DN A B C D E G H J K L M N R S T U V W Bonnet
15 140 49 95 67 13 92 127 112 78 16 4 8 84 5 13 25 25 M5 F03
20 152 56 118 83 22 123 165 142 100 19 4 13 109 8 16 30 30 M5 F04
25 165 56 124 89 25 126 165 146 104 19 4 13 113 8 16 30 30 M5 F04
40 191 67 156 114 38 152 203 177 122 22 4 16 134 9 18 35 35 M6 F05


Fire-Tite 1/2” – 1-1/2” (DN15 – 40) Full Port Series 9000 Valves with Emission-Pak
Body Material
(22) 36) (35) (71)
specified
specified
6 Body Seal TFM
13 Stem Bearing PTFE, Filled PTFE
16 Hex Nut Carbon Steel (zinc plated)
20 Compression Plate 316 Stainless Steel 300 Series Stainless Steel
25 Socket Cap Screw 300 Stainless Steel Monel
29 Hex Cap Screw 300 Stainless Steel
31 Disc Springs Inconel Monel
Alloy 20
316 Stainless Steel ASTM Monel ASTM A494
101 Emission-Pak Housing Carbon Steel ASTM A216 Type WCB ASTM A351
A351 Type CF8M M35-1
Type CN7M
102 Hex Head Cap Screw ASTM A193 GR. B7, ASTM A193 GR. B8, B8C, B8T or B8M, Monel
103 Lantern Ring 316 Stainless Steel, Monel, Alloy 20
104 Double Stem Seals TFM
105 Emission-Pak Body Seal TFM
Emission-Pak Body
106 Graphite
Gasket
107 Pipe Plug Plastic
109 Bearing Strip PTFE
112 Warning Tag Polyethylene
19
B107-2 EN METSO

Non-Fire-Tite 1/2” – 1-1/2” (DN15 – 40) Full Port Series 9000 Valves with Emission-Pak
Body Material
(22) (36) (35) (71)
specified
specified
5 Seat 1
PTFE, Xtreme, PFA, PEEK & UHMWPE
6 Body Seal TFM (w/ PTFE, Xtreme, PFA seats) , UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats)
8 Primary Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PFA seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats)
10 Stem Guide PEEK (PEEK seated valves)
24 Stem Bearing PTFE (w/ PTFE seats), Filled PTFE (w/ Xtreme & PFA seats), PEEK (w/ PEEK seats), UHMWPE (w/ UHMWPE seats)
101 Emission-Pak Housing Monel ASTM A494 M35-1
102 Hex Head Cap Screw ASTM A193 GR. B7, ASTM A193 GR. B8, B8C, B8T or B8M, Monel
103 Lantern Ring 316 Stainless Steel, Monel, Alloy 20
104 Double Stem Seals TFM (w/ Xtreme, PTFE & PFA seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats)
105 Emission-Pak Body Seal TFM, UHMWPE (w/ UHMWPE seats)
106 Emission-Pak Body Gasket Graphite
Note 1: 17-4PH stem required with PEEK seats

2” - 6” (DN 50 - 150) Series 9150 valves with Emission-Pak

2” - 4” (DN 50 - 100) Series 9300 valves with Emission-Pak
Lockable Handle as
Standard
Bonnet accepts standard handle

kit, accessories and actuators
Double packed and live loaded

stem seals provide consistent
packing force, resists thermal
and pressure transients and
extends valve life
Optional monitoring port that allows padding

of the lantern area or instrumentation to
detect migrating liquids of gases
TFM / graphite body seal and gasket provides superior bonnet to stem
retainer interface and sealing performance to API-607 and ISO 15848-1
Qualification Test
2” – 6” (DN 50 – 150) 9150 and 2” - 4” 9300 (DN 50 - 100) series with Emission-Pak are qualified to
ISO 15848-1 AH CO3-SSA3 T(200C).
21
B107-2 EN METSO
DIMENSIONS
Series 9300 ASME Class 300 with Emission-Pak (Non-Trunnion)
L M Bolt Circle
A A
23
22
R S
4
72 29
70 30
109 20 13 24 31
7
106 110
13
105 104 Fire-Tite Non Fire-Tite
103 102
H 1/8 NPT
When 111 F
101 Equipped
71
C Typ. E Port
D = Bolt Circle
T 5 N = Size of holes
3 6 33 32 P = Number of holes
Typ. B
A
Series 9150 Emission-Pak ASME Class 150 Approximate Dimensions - inches

inches Pattern lb
2 7.00 4.14 6.00 4.75 2.00 6.24 8.31 M8 2.76 0.75 4 0.86 0.62 0.62 F07 39
3 8.00 4.26 7.50 6.00 3.00 7.06 9.11 M8 2.76 0.75 4 0.86 0.62 0.75 F07 59
4 9.00 4.50 9.00 7.50 4.00 9.45 12.18 M10 4.02 0.75 8 1.11 0.81 0.94 F10 105
6 15.50 8.25 11.00 9.50 6.00 11.39 14.49 M12 4.92 0.88 8 1.61 1.12 1.00 F12 276
Series 9150 Emission-Pak ASME Class 150 Approximate Dimensions - mm

DN Pattern kg
50 178 105 152 121 51 158 211 M8 70 19 4 22 16 16 F07 18
80 203 108 191 152 76 179 231 M8 70 19 4 22 16 19 F07 27
100 229 114 229 191 102 240 309 M10 102 19 8 28 21 24 F10 48
150 394 210 279 241 152 289 368 M12 125 22 8 41 28 25 F12 125

inches Pattern lb
2 8.50 4.89 6.50 5.00 2 6.24 8.31 M8 2.76 0.75 4 0.86 0.62 0.87 F07 47
3 11.12 6.11 8.25 6.62 3 8.63 11.34 M10 4.02 0.88 8 1.11 0.81 1.12 F10 93
4 12.00 6.86 10.00 7.88 4 9.77 12.87 M12 4.92 0.88 8 1.61 1.12 1.25 F12 168

DN Pattern kg
80 216 124 165 127 51 158 211 M8 70 19 4 22 16 22 F07 21
100 282 155 210 168 76 219 288 M10 102 22 8 28 21 28 F10 42
150 305 174 254 200 102 248 327 M12 125 22 8 41 28 32 F12 76


Fire-Tite 2” - 6” (DN50 - 150) Full Port Series 9150 Valves, 2” - 4” (DN50 - 100) Full Port Series 9300 Valves with Emission-Pak
Body Material
(22) (36) (35) (71)
Carbon Steel 316 Stainless Steel
1 Body ASTM A216 Type ASTM A351 Type Alloy 20 ASTM A351 Type CN7M Monel ASTM A494 M35-1
WCB CF8M
Carbon Steel 316 Stainless Steel
2 Body Cap ASTM A216 Type ASTM A351 Type Alloy 20 ASTM A351 Type CN7M Monel ASTM A494 M35-1
WCB CF8M
specified
316 Stainless Steel, 17-4PH, Monel, Monel, Hastelloy C as
4 Stem Alloy 20
Hastelloy C specified
Spiral Wound Graphite/316 Stainless Spiral Wound Graphite/
6 Body Seal Spiral Wound Graphite/Alloy 20
Steel Monel
Bottom Grounding
71 Inconel
Spring
Emission-Pak Stem Carbon Steel ASTM A216 316 Stainless Steel ASTM Alloy 20 ASTM A351 Type
101 Monel ASTM A494 M35-1
Retainer Type WCB A351 Type CF8M CN7M
102 Stud ASTM A193 GR. B7, ASTM A193 GR. B8, B8C, B8T or B8M, Monel
103 Spacer/Lantern Ring 316 Stainless Steel, Monel, Alloy 20
105 Inner Stem Retainer Seal TFM
106 Outer Stem Retainer Seal Graphite
110 Compression Ring 316 Stainless Steel, Monel
111 Hex Nut ASTM A194 GR. 2H, ASTM A194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel
23
B107-2 EN METSO

Non-Fire-Tite 2” - 6” (DN50 - 150) Full Port Series 9150 Valves, 2” - 4” (DN50 - 100) Full Port Series 9300 Valves with Emission-Pak
Body Material
Part No. Part Name Alloy 20 Monel
Carbon Steel (22) 316 Stainless Steel (36)
(35) (71)
specified
specified
Spiral Wound PTFE/Alloy
6 Body Seal Spiral Wound PTFE/316 Stainless Steel Spiral Wound PTFE/Monel
20
Bottom Grounding
71 Inconel
Spring
Alloy 20
Emission-Pak Stem 316 Stainless Steel ASTM Monel ASTM A494
101 Carbon Steel ASTM A216 Type WCB ASTM A351
Retainer A351 Type CF8M M35-1
Type CN7M
102 Stud ASTM A193 GR. B7, ASTM A193 GR. B8, B8C, B8T or B8M, Monel
103 Spacer/Lantern Ring 316 Stainless Steel, Monel, Alloy 20
104 Stem Seal PTFE (w/ PTFE seats), TFM (w/ Xtreme & PFA seats), UHMWPE (w/ UHMWPE seats), Graphite (w/ PEEK seats)
105 Inner Stem Retainer Seal TFM, PFA (w/ PFA Seats), UHMWPE (w/ UHMWPE seats)
106 Outer Stem Retainer Seal Graphite
110 Compression Ring 316 Stainless Steel, Monel
111 Hex Nut ASTM A194 GR. 2H, ASTM A194 GR. 8B, 8CB, 8MB, 8TB, 8FB, Monel

EMISSION-PAK VALVE TORQUE DATA

Use these torque charts as a guide for actuator selection. Manual Gear Actuators A100-1
Additional requirements may be imposed by media B-Series Piston Actuators 6B20
characteristics, trim, and frequency of valve operation. For Quadra-Powr X Spring Diaphragm
clean lubricating fluid service, required torque for PTFE
Rotary Actuators A110-4
(T) and Xtreme (X) seated valves only may be reduced
20% when the valve is equipped with corrosion resistant Valv-Powr Series VPVL A111-3
trim. For difficult services such as slurries and semi-solids, VPVL Stainless Steel A111-4
and for oxygen, increase values by 50%. If in doubt, err on V-Series Electric Actuators V200-1
the side of safety by using a larger actuator than would ADC-Series Electric Actuators V201-1
normally be selected. LC Series’ Electric Actuators V202-1 & V203-1
Torque output values and actuator selection tables for the ESR-Series Electric Actuators V204-1
different types of Jamesbury actuators are contained in the
Q6-Series Electric Actuators V205-1
bulletins listed below.
QX-Series Electric Actuators V207-1
ASME Class 150 and 300 Valve Torque Data

PTFE (T) Seated Valves Xtreme (X) and TFM (Z) Seated Valves
Maximum Differential Pressure, bar Maximum Differential Pressure, bar

10 20 30 40 50 60 10 20 30 40 50 60
900 900
800 1000 800 1000
700 700 6” (DN 150) FB
600 4” (DN 100) FB
600 Non-Trunnion
500 6” (DN 150) FB
500 (See Note 4)
400 Non-Trunnion 4” (DN 100) FB
(See Note 4) 500 400 500
300
300
300 3” (DN 80) FB
200 300
3” (DN 80) FB 200
200
200

100
80 100 100
60 80 2” (DN 50) FB 100
50 2” (DN 50) FB 70
60
40 50 50
30 40 1-1/2” (DN 40) FB
50
1-1/2” (DN 40) FB
20 30
20
20
10 1” (DN 25) FB 1” (DN 25) FB 20
8 3/4” (DN 20) FB
10 3/4” (DN 20) FB
6 10
5 8 10
4 5 7
6
3 5
1/2” (DN 15)
4 1/2” (DN 15) FB 5
2
3
1 2
0 100 200 300 400 500 600 700 800 900
1
0 100 200 300 400 500 600 700 800 900 1000
FB = Full Bore
Note 4: Dashed line indicates Non-Trunnion and is rated to Class 150 only for seats.

B107-2 EN METSO
ACCESSORIES
Slide Lock
Locking Devices Standard
When safety measures are necessary, a reliable locking
feature is standard to allow the valve to be padlocked in
either the open or closed position.
1/2” – 1-1/2” (DN 15 – 40)

Series 9000
Bonnet/Stem Extensions Round Handles h
4” (102 mm) bonnet/stem exten-
Series 9000 ball valves have
sions are available for applica-
optional round handles (non
tions and are particularly useful
lockable) available. To order
for automated and manual prod- A
ucts. Extensions can also be used handles separately, specify
to prevent interference between the part number shown in the
actuators and companion pipe- 4” (102 mm)
accessories table below. Centerline of Valve
lines and equipment. They are
ideal as extension that require Oval handles h
locking lever or locking oval Handle
with slide-lock
handle capability. Stainless steel
Optional oval handle saves
construction is also available.
Stem
space and may be padlocked
Extension to retain the valve in the open A
4"
(102mm) or closed position. To order
handles separately, specify
the part number shown in the
accessories table below. Centerline of Valve
Valve Bonnet
Stem Extensions
2” – 6” Cavity Fillers
4” (102 mm) non-lockable stem
extensions are available for Cavity fillers are available in
manual valves. Extensions can non-trunnion 9000 series full
also be used to prevent inter- bore valves. The fillers are PTFE
ference between companion or Xtreme and used for sanitary
pipelines and equipment. 4” (102 mm)
applications and in processes
Compatible with all handle where cross contamination is a
options. Stainless steel construc- concern. Food processing, phar-
tion is also available. ma-chemicals, cosmetics, paints,
1/2” – 1-1/2” solvents, finishes and dyes are
typical applications where fillers
are employed.
Accessory Table – inches (DN)

Allowable Max. Torque
Valve Size Lever Locking Stem Bonnet/ Locking Round/Oval Handle
Round FT•LBS (N•m)
Handle Device Ext. Stem Ext. Oval
Full Bore Dimension A Dimension H Round Oval
1/2” (15) SE-093 SE-096 112-0108-30 112-0105-30 4.00 (101.6) 2.96 (75.2) 9 (12) 9 (12)
3/4” (20) SE-094 SE-097 112-0109-30 112-0106-30 4.50 (114.3) 3.70 (94.0) 18 (24) 18 (24)
Standard
1” (25) SE-094 SE-097 112-0109-30 112-0106-30 4.50 (114.3) 3.83 (97.3) 18 (24) 18 (24)
Equipment
1-1/2” (30) SE-095 SE-098 112-0110-30 112-0107-30 5.75 (146.0) 4.75 (120.7) 25 (34) 25 (34)
1-1/2” (40) SE-095 SE-098 112-0110-30 112-0107-30 5.75 (146.0) 4.94 (125.5) 25 (34) 25 (34)
Standard
2” (50) BHK-0070 SE-099 SE-0102
Equipment
3” (80) 9150 BHK-0070 SE-99 SE-0102
3” (80) 9300 BHK-0071 SE-0100 SE-0103
NA
4” (100) 9150 BHK-0071 SE-0100 SE-0103
4” (100) 9300 BHK-0072 SE-0101 SE-0104
6” (150) 9150 BHK-0072 SE-0101 SE-0104
* For valves with PEEK(L) seats that require stem extensions use bonnet/stem extension SE-096, 097 or 098.

DIMENSIONS
2”- 6” (DN50 - 150) Series 9150 ASME Class 150 and

2”- 4” (DN50 -100) Series 9300 ASME Class 300
0.375
9.53
27.500
698.50
0.375
K OPTIONAL HANDLE
9.53
ASSEMBLY POSITION
0.563
14.29
0.375 TYP.
9.53
30.000
762
BHK-0070 & BHK-0071 BHK-0072

Valve Size
Handle Kit Number J K ISO Pattern Weight lb
Inches
2 BHK-0070 5.84 14.00 F07 7
3 BHK-0070 6.65 14.00 F07 7
4 BHK-0071 8.94 19.94 F10 9
6 BHK-0072 12.57 15.00 F12 34

Valve Size
Handle Kit Number J K ISO Pattern Weight kg
DN
50 BHK-0070 148 356 F07 3
80 BHK-0070 169 356 F07 3
100 BHK-0071 227 506 F10 4
150 BHK-0072 319 381 F12 15

Valve Size
Inches
2 BHK-0070 5.84 14.00 F07 7
3 BHK-0071 8.11 19.94 F10 9
4 BHK-0072 11.00 15.00 F12 34

Valve Size
DN
50 BHK-0070 148 356 F07 3
80 BHK-0071 206 506 F10 4
100 BHK-0072 279 381 F12 15

B107-2 EN METSO
DIMENSIONS

2” - 4” (DN 50 - 100) Series 9300 ASME Class 300 with Emission-Pak
K
0.375
9.53 0.375
9.53 27.500
698.50
K
OPTIONAL HANDLE
ASSEMBLY POSITION
0.375 TYP. 0.563
9.53 14.29
30.000
762
BHK-0070 & BHK-0071
BHK-0072

Valve Size
inches
2 BHK-0070 9.00 14.00 F07 7
3 BHK-0070 9.81 14.00 F07 7
4 BHK-0071 12.87 19.94 F10 9
6 BHK-0072 16.69 15.00 F12 34

Valve Size
DN
50 BHK-0070 228 356 F07 3
80 BHK-0070 249 356 F07 3
100 BHK-0071 327 506 F10 4
150 BHK-0072 424 381 F12 15

Valve Size
inches
2 BHK-0070 9.00 14.00 F07 7
3 BHK-0071 12.05 19.94 F10 9
4 BHK-0072 15.12 15.00 F12 34

Valve Size
DN
50 BHK-0070 228 356 F07 3
80 BHK-0071 306 506 F10 4
100 BHK-0072 384 381 F12 15

WARNING:
As the use of the valve is application specific, a number of factors should be taken into account when selecting a valve for a given appli-
cation. Therefore, some of the situations in which the valves are used are outside the scope of this manual. If you have any questions
concerning the use, application or compatibility of the valve with the intended service, contact Metso for more information.
HOW TO ORDER
EXAMPLE: A 2” ASME Class 150 short design valve (9150) in Fire-
1 2 3 4 5 6 7 8
Tite design (3) with raised-face flanges (31), carbon steel body
(22), and 316 stainless steel trim (36), with Xtreme seats (XTZ) and 2” 9150 – 31 22 36 XTZ 1
molecularlyenhanced
PTFE stem seals is written: 2” 9150-31-2236XTZ1.
1 Size 4 End Connection Size Range

1/2” (DN 15) 4” (DN 100) 14” (DN 350) 11 Raised Face, Non-Fire-Tite, 1/2” – 8” (DN 15 – 200)
3/4” (DN 20) 6” (DN 150) 16” (DN 400) Non-Trunnion
1/2” to 1” (DN 25) 8” (DN 200) 18” (DN 450) 31 Raised Face, Fire-Tite, 1/2” – 8” (DN 15 – 200)
24” 1-1/2” (DN 40) 10” (DN 250) 20” (DN 500) Non-Trunnion
2” (DN 50) 12” (DN 300) 24” (DN 600) 51 Raised Face, Non-Fire-Tite, 8” - 24” (DN200 - 600) Class 150
3” (DN 80) Trunnion 6” - 24” (DN150 - 600) Class 300
71 Raised Face, Fire-Tite, 8” – 24” (DN 200 – 600) Class 150
Trunnion 6” – 24” (DN 150 – 600) Class 300
2 Valve Series & Style Size Range
9150 Full Bore Class 150 1/2” – 24” (DN 15 –600)
9180 Full Bore Class 150* 1/2” – 24” (DN 15 –600) 5 Body Material*
9300 Full Bore Class 300 1/2” – 24” (DN 15 –600) 225 Carbon Steel (WCB)
9380 Full Bore Class 300* 1/2” – 24” (DN 15 –600) 28 Carbon Steel (LCC)
930L Full Bore Class 300 B16.10 long F-F 8” (DN 200) 35 Alloy 20 (CN7M)
938L Full Bore Class 300 B16.10 long F-F* 8” (DN 200) 365 Stainless Steel (CF8M)
* Metric units on nameplate. Valves larger than 1” (DN 25) are CE marked. 715 Monel
Includes static grounding.
* Other materials available upon request
3 Special Construction
6 Ball & Stem Materials*
— Standard (no entry)
C Chlorine 35 Alloy 20 (CN7M)
DBB Double Block and Bleed 365 Stainless Steel (CF8M)
DT 125 RMS Flange Finish 715 Monel & K Monel
O Oxygen 73 Hastelloy C
Q Cavity Filler (Xtreme w/ XT, PTFE w/ TT) HB5 316 SS & 17-4PH Required for seat code LGG
STG Static Ground (1/2” – 1-1/2” 9000) (Not for Emission-Pak) 00 Same as body Carbon steel not available
TG Top Ground (1/2” – 1-1/2” 9000) (Not for Emission-Pak) * Other materials available upon request
V High Vacuum
VC High Vacuum Certified
Emission-Pak Coding 7 Seat Material* Available Sizes
LA Standard w/o leakoff XTZ Xtreme All
LL Standard w/ leakoff BTT PFA 1/2” – 6” (DN 15 – 150)
LC Chlorine w/o leakoff LGG†12 PEEK 1/2” – 4” (DN 15 – 100)
L1 Chlorine w/ leakoff MBT1 Barrier Filled PTFE 3” – 10” (DN 80 – 250)
Static Ground w/o leakoff TTT PTFE All
L2 1/2”-6” (DN 15 – 150)
(1/2” – 1-1/2” 9000 ONLY)
9150/9180 UUU1 UHMWPE 1/2” – 8” (DN 15 – 200)
Static Ground w/ leakoff
L3 1/2”-4” (DN 15 – 100) ZTT TFM 1/2” – 10” (DN 15 – 250)
(1/2” – 1-1/2” 9000 ONLY)
9300/9380 * Other materials available upon request
LV High Vacuum w/o leakoff
LB High Vacuum w/ leakoff † Requires 17-4PH Stem
1 Non-Fire-Tite only
LW High Vacuum Certified w/o leakoff
2 Not a self relieving seat
LJ High Vacuum Certified w/ leakoff
LX Oxygen w/o leakoff
LG Oxygen w/ leakoff

B107-2 EN METSO
Valve Body Bolting Valve Gland Bolting Materials 9 Model Code*

8 Materials* 1/2” – 1-1/2” (DN 15 – 40) 9000 (Non-Emission-Pak)
Studs Nuts Bolts/Studs Nuts A 6” (DN 150) 9150, 9180
10” – 24” (DN 250 – 600) 9000
1 ASTM A193 ASTM ASTM A193 Gr. ASTM A194 Gr.
Gr. B7 A194 Gr. B8, B8C, B8M or 8B, 8CB, 8MB, B 6” – 8” (DN 150 – 200) 9300, 9380, 930L, 938L
2H or 2HB B8T, Class 2 8T8, 8FB 1/2” – 1-1/2” (DN 15 – 40) 9000 (Emission-Pak)
2 ASTM A193 ASTM ASTM A193 Gr. ASTM A194 Gr. 2” – 6” 9150, 9180 (Non-Emission-Pak)
Gr. B8, B8C, A194 Gr. B8, B8C, B8M or 8B, 8CB, 8MB, C 2” – 4” 9300, 9380 (Non-Emission-Pak)
B8M or B8T 8B, 8CB, B8T, Class 2 8T8, 8FB 2” – 6” 9150, 9180 (Emission-Pak)
Class 2 8MB, 8T8, 2” – 4” 9300, 9380 (Emission-Pak)
8FB * Model Code not required when ordering
4** K-Monel K-Monel K-Monel K-Monel (71)
5**4 ASTM A193 ASTM ASTM A193 ASTM A194
Gr. B7M A194 Gr. Gr. B7M Gr. 2HM
2HM
H Alloy 20 Alloy 20 Alloy 20 Alloy 20
* Other materials available upon request
** Required for compliance to NACE for 2” and larger (if buried or
insulated)
4 1-1/2” and smaller NACE compatibility (if buried or insulated)
5 Material meets NACE requirements for sour environments. For
valves to be in full compliance with NACE, both the body (sign #5)
and trim (sign #6) must meet the NACE requirements.
Hastelloy is a registered trademark of Haynes International, Inc.

Monel is a registered trademark of Special Materials Corp.
Inconel is a registered trademark of Special Materials Corp.
PEEK is a registered trademark of Victrex USA Inc.

STANDARDS AND SPECIFICATIONS
The Company
ISO 9001 – 2015
Pressure Equipment Directive 2014/68/EU
Available Standards
API 598 American Petroleum Institute - Valve Inspection and testing
API 607 American Petroleum Institute - Fire Test for Soft Seated Valves
API 608 Metal Ball Valves Used in On-Off Service that have Buttwelded or Flanged Ends
ASME B16.10 American National Standard - Face-to-Face and End-to-End Dimensions of Ferrous Valves
ASME B16.5 American National Standard - Steel Pipe Flanges and Flanged Fittings
ASME B16.34 American National Standard - Steel Valves - Flanged and Buttwelded End
ASME B31.1 American National Standard - Power Piping
ASME B31.3 American National Standard - Chemical Plant and Petroleum Refinery Piping
FCI 70-2 American National Standard - For Control Valve Seat Leakage
ISO 15848-1 Industrial Valves - Fugitive Emissions - Measurement, Test & Qualification Procedures
ISO 17292 Metal Ball Valves for Petroleum, Petrochemical and Allied Industries
ISO 5752 International Standard for Organization Metal Valves for use in Flanged Piping Systems
ISA 75.02 Valve Sizing Coefficient Cv, Piping Geometry Factor Fp and Pressure Drop Limitation XT
ISA S75.19 Hydrostatic Testing of Control Valves
ISO 5211 Dimensions for Attachment of Actuators/Gear Boxes to Valves (ISO Mounting)
MSS SP-25 Manufacturers Standardization Society - Standard Marking System for Valves
MSS-SP-55 Manufacturers Standardization Society - Quality Standards for Steel Castings
MSS-SP-6 Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
MSS-SP-44 Steel Pipe Line Flanges
MSS-SP-61 Pressure Testing of Steel Valves
MSS SP-72 Flanged or Butt and Weld End Ball Valves Having Full or Reduced Bores for General Liquid and Gas Service
MSS SP-96 Terminology for Valves and Fittings
2014/68/EU European Pressure Equipment Directive (PED)
MSS SP-53-1995 Quality Standard For Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping
Components-Magnetic Particle Examination Method
MSS SP-93-1987 Quality Standard For Steel Castings and Forgings for Valves, Flanges and Fittings and Other Piping
Components-Liquid Penetrant Method
NACE Standard MR0103 National Association of Corrosion Engineers-Engineers - Materials Resistant to Sulfide Stress Cracking in
Corrosive Petroleum Refining Environments
NACE Standard MR0175 National Association of Corrosion Engineers - Materials For Use In H25- Containing Environments In
Oil And Gas Production
Factory Mutual (FM) Figure 1052 Gas and Oil Shutoff Valves.
Factory Mutual (FM) Figure 1051 Supervisory Cock Valves, Electric Interlocking Fuel Gas and Fuel Oil Cocks.
CSA Figure 1057/1056 Gas Shut-Off and Vent Valves.
Factory Mutual (FM) Figure 1075 Emergency Shut-Off and Fire-Safe Valves.
CSA CSA 3.16.
EN 161/264 Automatic Shut-Off Valves for Gas Burners and Gas Appliances
Underwriter Laboratory (UL) Categories MHKZ, YQAR, YRBX, YRPV, YSDT.
Underwriter’s Laboratories of Canada (ULC) Categories YSDT7 & YRPV7
31
Subject to change without prior notice.
Metso Flow Control Inc.

Europe, Vanha Porvoontie 229, P.O. Box 304, FI-01301 VANTAA, Finland.
Tel. +358 20 483 150. Fax +358 20 483 151
http://contact.metso.com/
North America, 44 Bowditch Drive, P.O. Box 8044, Shrewsbury, MA 01545, USA.
Tel. +1 508 852 0200. Fax +1 508 852 8172
South America, Av. Independéncia, 2500- Iporanga, 18087-101, Sorocaba-São Paulo, Brazil.
Tel. +55 15 2102 9700. Fax +55 15 2102 9748/49
B107-2 EN • 11/2018
Asia Pacific, 238B Thomson Road, #17-01 Novena Square Tower B, Singapore 307685.
Tel. +65 6511 1011. Fax +65 6250 0830
China, 11/F, China Youth Plaza, No.19 North Rd of East 3rd Ring Rd, Chaoyang District,
Beijing 100020, China. Tel. +86 10 6566 6600. Fax +86 10 6566 2583
Middle East, Roundabout 8, Unit AB-07, P.O. Box 17175, Jebel Ali Freezone, Dubai,
United Arab Emirates. Tel. +971 4 883 6974. Fax +971 4 883 6836
www.metso.com/valves

9000 Series

Uploaded by

Copyright:

Available Formats

9000 Series

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

9000 Series

Uploaded by

Copyright:

Available Formats

FLANGED BALL VALVES

ASME CLASS 150 & 300

The Jamesbury® polymer-seated flanged ball

CE marked Automated Assemblies

SPECIFICATIONS Valve Size Cv

Flow Data Inches DN Full Bore

Maximum Working Pressure, psi

Maximum Working Pressure, bar

Valve Seat Ratings

2 TECHNICAL BULLETIN 11/18

Maximum Differential Pressure, bar

Class 300 Steam

Maximum Differential Pressure, bar

Maximum Differential Pressure, psi

6” (DN 150) Full Bore Non-Trunnion

Maximum Differential Pressure, bar

TECHNICAL BULLETIN 11/18 3

The Ultimate Process Automation Package for VPVL Pneumatic Actuators,

Digital valve communication terminals

Available for general purpose

Cast 300 Series SS brackets

17-4PH SS coupling for Patented stem seal

Automation Performance and Value

4 TECHNICAL BULLETIN 11/18

4 Holes øL on a øM Bolt Circle

BILLS OF MATERIALS AND PARTS LIST

BILLS OF MATERIALS AND PARTS LIST

6 TECHNICAL BULLETIN 11/18

2”– 6” (DN50 – 150) Series 9150 ASME Class 150 and

Series 9150 ASME Class 150 Approximate Dimensions - inches

Series 9150 ASME Class 150 Approximate Dimensions - mm

Series 9300 ASME Class 300 Approximate Dimensions - mm

BILLS OF MATERIALS AND PARTS LIST

BILLS OF MATERIALS AND PARTS LIST

8 TECHNICAL BULLETIN 11/18

8” (DN 200) Series 9150 ASME Class 150 and

Series 9300 & 930L ASME Class 300 Approximate Dimensions - mm

TECHNICAL BULLETIN 11/18 9

BILLS OF MATERIALS AND PARTS LIST

10 TECHNICAL BULLETIN 11/18

8” - 12” (DN200 - 300) Series 9150 ASME Class 150 and

BILLS OF MATERIALS AND PARTS LIST

Part Body Material

12 TECHNICAL BULLETIN 11/18

BILLS OF MATERIALS AND PARTS LIST

Part Body Material

14 TECHNICAL BULLETIN 11/18

STANDARD VALVE TORQUE DATA

ASME Class 150 and 300 Standard Valve Torque Data

8” (DN 200) 6” (DN 150) 1000 4” (DN 100)

Recommended Actuator Torque, N•m

500 (See Note 4) Non-Trunnion

TECHNICAL BULLETIN 11/18 15

STANDARD VALVE TORQUE DATA

PEEK (L) Seated Valves 1/2” – 6” (DN 15 – 150)

Recommended Actuator Torque, N•m

See Note 2 200 UHMW Polyethylene (U) Seated Valves

8 1/2” (DN 15)

Recommended Actuator Torque, N•m