The document contains a G-code program for milling two contour shapes. It specifies tool and spindle setup, then defines the tool path for each contour using line and arc segments at incremental Z-axis depths from 0 to 30mm. The program mills the first contour shape moving the tool left and right in a zigzag pattern. It then mills the second contour shape by moving the tool along arcs and lines in a closed loop pattern.
The document contains a G-code program for milling two contour shapes. It specifies tool and spindle setup, then defines the tool path for each contour using line and arc segments at incremental Z-axis depths from 0 to 30mm. The program mills the first contour shape moving the tool left and right in a zigzag pattern. It then mills the second contour shape by moving the tool along arcs and lines in a closed loop pattern.
The document contains a G-code program for milling two contour shapes. It specifies tool and spindle setup, then defines the tool path for each contour using line and arc segments at incremental Z-axis depths from 0 to 30mm. The program mills the first contour shape moving the tool left and right in a zigzag pattern. It then mills the second contour shape by moving the tool along arcs and lines in a closed loop pattern.
The document contains a G-code program for milling two contour shapes. It specifies tool and spindle setup, then defines the tool path for each contour using line and arc segments at incremental Z-axis depths from 0 to 30mm. The program mills the first contour shape moving the tool left and right in a zigzag pattern. It then mills the second contour shape by moving the tool along arcs and lines in a closed loop pattern.