1001

SOLVED PROBLEMS IN

ELECTRICAL

ENGINEERING
 Electricity: Basic Principles

STRUCTURE OF MATTER

 Matter – anything that occupies space and has weight

 Element – a substance that cannot be decomposed any further by chemical action

 Compound – a combination of two or more elements

 Molecule – smallest particle that a compound can be reduced to before it breaks down into its

elements

 Atom – smallest part that an element can be reduced to and still keeping the properties of the

element

Parts of an atom:

Name Charge Mass(kg)

Proton Positive Charge

Electron Negative Charge

Neutron No Charge

The atomic structure of an atom:

where: N = total number of electrons on a given shell

n= shell of an atom

 Valence electrons – electrons found in the outermost shell or orbit of an atom

 Atomic Number – represents the number of electrons or protons of an atom

 Atomic Mass – represents the sum of protons and neutrons of an atom

Valence
Element No. of electrons No. of protons No. of neutrons
electron(s)

Copper 29 29 34 1

Aluminum 13 13 14 3

Germanium 32 32 41 4

ELECTRIC CHARGE

A body is said to be charge, if it has either an excess or deficit of electrons from its normal values due to

be sharing.

 Coulomb (C) – unit of electric charge, which is equivalent to electrons or protons.

Named after the French physicist, Charles A. Coulumb (1736 – 1806).

POTENTIAL DIFFERENCE

Potential – the capability of doing work.

Any charge has the capability of doing work of moving another charge either by attraction or repulsion.
The net number of electrons moved in the direction of the positive charge plate depend upon the

potential difference between the two charges.

 Volt (V) – unit of potential difference, which is equal to one joule of work done per one

coulomb of charge. Named after the Italian physicist, Alessandro C. Volta (1754 – 1827) who

invented the first electric battery.

ELECTRIC CURRENT

When a potential difference between two charges forces a third charges forces a third charge to move,

the charge in motion is called an electric current.

  Ampere (A) – unit of charge flow equal to one coulomb of charge past a given point in one

second. Named after the French physicist and mathematician, Andre M. Ampere (1775 – 1836).

RESISTANCE

The fact that a wire carrying a current can become hot, it is evident that the work done by the applied

force in producing the current must be accomplished against some opposition or resistance.

 Ohm (Ω) – practical unit of resistance. Named after the German physicist, Georg S. Ohm (1787 –

1854).

Where: R = resistance (ohm)

A = cross-sectional area (square meter)

Ρ = resistivity (ohm-meter)

L = length (meter)

V = volume cubic meter

 Specific resistance (resistivity) – resistance offered by a unit cube of the material

 Circular mil (CM) – area of a circle having a diameter (d) of one mil.

1 MCM = 1,000 CM

EFFECT OF TEMPERATURE IN RESISTANCE

Experiments have shown that the resistance of all wires generally used in practice in electrical systems,

increases as the temperature increases.

where: = initial resistance (ohm)

= final resistance (ohm)

= inferred absolute temperature

= temperature when resistance of a given material is zero

= initial temperature

= final temperature

= change in temperature

α = temperature coefficient of resistance

Material Ρ(Ω∙CM/ft) T(°C) α at 20 °C

Silver 9.9 243 0.0038

Copper 10.37 234.5 0.00393

Aluminum 17 236 0.0039

Tungsten 33 202 0.0045

Zinc 36 250 0.0037

 Temperature coefficient of resistance (α) – ohmic change per degree per ohm at some specified

temperature.

INSULATION RESISTANCE OF CABLES

where: ρ = resistivity of the insulating material (ohm-meter)

= length of cable (meter)

= radius of the cable

= radius to the outer surface of the insulation

CONDUCTANCE

 Conductance is a measure of the material’s ability to conduct electric current. It is equal to the

reciprocal of resistance.

 Siemens (formerly mho) – unit of conductance. Named after the German engineer, Ernst

Werner von Siemens (1816 – 1892)

where: = conductivity (siemens per meter)

L = length (meter)

A = cross – sectional area (square meter)

ρ = specific resistance (ohm – meter)

G = conductance (siemens)

R = resistance (ohm)
 Test 1

Problem 1:

A positively charged dielectric has charge of 2 coulombs. If free electrons are added to

it, what will be the net charge on the said dielectric?

A. 4 C

B. -2 C

C. 8 C

D. Zero

Problem 2:

A battery can deliver 10 joules of energy to move 5 coulombs of charge. What is the potential

difference between the terminals of the battery?

A. 2 V

B. 50 V

C. 0.5 V

D. 5 V

Problem 3:

A cloud of electrons move past a given point every 2 seconds. How much is the intensity

of the electron flow?

A. 1 A
B. 2 A

C. 2.5 A

D. 1.5 A

Problem 4:

The current in an electric lamp is 5 amperes. What is the quantity of electricity flows towards the

filament in 6 minutes?

A. 30 C

B. 3600 C

C. 72 C

D. 1800 C

Problem 5:

A constant current of 4 A charges a capacitor. How long will it take to accumulate a total charge of 8

coulombs on the plates?

A. 2 s

B. 32 s

C. ½ s

D. 12 s

Problem 6: EE Board March 1998

 The substation bus bar is made up of 2-inches round copper bars 20 ft long. What is the resistance

of each bar if resistivity is ohm-cm.

A. ohm

B. ohm

C. ohm

D. ohm

Problem 7: EE Board October 1997

Determine the resistance of a bus bar made of copper if the length is 10 meters long and the cross-

section is a 4 x 4 . Use 1.7241 micro ohm-cm as the resistivity.

A. ohm

B. ohm

C. ohm

D. ohm

Problem 8:

Nichrome ribbon resistor elements each has a resistance of 1 ohm. The element is made from sheet

of nichrome alloy, 0.025 cm thick. If the width of the ribbon is 0.3 cm, what length is required per

element? Assume specific resistance of nichrome alloy to be 109 µΩ-cm.

A. 68.8 cm

B. 62.1 cm
C. 70.7 cm

D. 67.4 cm

Problem 9: EE Board October 1991

One turn of a copper bar is produced by cutting a copper washer along a radius and spreading the

ends. The washer is cut from soft-drawn copper having a resistivity at 20°C of ohm-cm.

The washer is 0.125 inch thick and has inside diameter and outside diameter of 1 inch and 9 inches

respectively. Calculate the exact resistance between the two ends of the turn to direct current, taking

into account the non-uniform current distribution. Assume the contact along the ends of the turn to be

perfect over the entire cross-section.

A. ohm

B. ohm

C. ohm

D. ohm

Problem 10: EE Board October 1999

Determine the resistance of a conductor 0.10 m long, with a uniform diameter of 1.0 cm and having

a resistivity which varies as a function of length L measured from one end of the conductor according to

the formula: ohm-cm.

A. 0.0852 ohm

B. 0.0915 ohm

C. 0.0806 ohm
D. 0.0902 ohm

Problem 11: EE Board April 1992

A coil has 6000 turns of wire and a resistance of 380 ohms. The coil is rewound with the same

quantity (weight) of wire, but has 13,400 turns. How many ohms will the new coil have?

A. 1895 ohms

B. 1825 ohms

C. 1792 ohms

D. 1905 ohms

Problem 12: EE Board April 1992

A copper wire of unknown length has a resistance of 0.80 ohm. By successive passes through

drawing dies, the length of the wire is increased to 2 ½ times its original value. Assuming that resistivity

remains unchanged during the drawing process, determine the new value of its resistance.

A. 4 Ω

B. 3 Ω

C. 5 Ω

D. 6 Ω

Problem 13: EE Board October 1998

A one-meter rod of 2-cm diameter is drawn until its resistance is 100 times the initial resistance. Its

length afterward is?

A. 10 m
B. 100 m

C.12.5 m

D. 5 m

Problem 14: EE Board April 1993

A kilometer of wire having a diameter of 11.7 mm and a resistance of 0.031 ohm is drawn down so

that its diameter is 5.0 mm. What does its resistance become?

A. 0.85 ohm

B. 0.78 ohm

C. 0.93 ohm

D. 0.81 ohm

Problem 15:

A conductor whose diameter is 0.175 has a resistance of 0.5 ohm. The wire is drawn through a series

of dies until its diameter is reduced to 0.08 inch. Assuming the specific resistance of the material

remains constant, what is the resistance of the lengthened conductor?

A. 11.45 Ω

B. 10.22 Ω

C. 12.75 Ω

D. 10.82 Ω

Problem 16: EE Board April 1995

 A certain wire has a resistance R. The resistance of another wire identical with the first except for

having twice its diameter is

A. 4R

B. ½ R

C. 2R

D. ¼ R

Problem 17:

A given wire has a resistance of 17.5 ohms. If its length is 560 m, how much length must be cut-off

from the wire in order to reduce its resistance to 12.5 ohms.

A. 160 m

B. 170 m

C. 145 m

D. 155 m

Problem 18: EE Board October 1996

What is the size in square millimeter ( ) is the cable of 250 MCM size?

A. 118.656

B. 126.675

C. 112.565

D. 132.348
Problem 19:

A 500 MCM ACSR cable has 37 strands. Determine the diameter I mils of each strand.

A. 116.25

B. 120.24

C. 118.34

D. 110.35

Problem 20:

A copper transmission line is to be replaced by one of aluminum having the same total resistance. If

the cross sectional area of the copper wire is 500 MCM, what would be the cross sectional area of the

new aluminum wire?

A. 800 MCM

B. 820 MCM

C. 850 MCM

D. 900 MCM

Problem 21: EE Board October 1998

The resistance of a copper wire at 30 °C is 50 ohms. If the temperature coefficient of copper at 0 °C

is 0.00427, what is the resistance at 100 °C?

A. 72.26 ohms

B. 54.25 ohms
C. 63.24 ohms

D. 58.15 ohms

Problem 22:

The shunt field winding of a shunt generator has a resistance of 80 ohms at 20 °C. After several

hours of continuous operation, the winding temperature rises to 50 °C. How much is the winding

resistance under this condition. Assume the resistance temperature coefficient of copper to be 0.004

ohm per degree at 0°C.

A. 88.89 Ω

B. 90.12 Ω

C. 85.22 Ω

D. 92.81 Ω

Problem 23:

The field windings of a series motor has a resistance of 120 ohms at 15°C. After running for two

hours, the resistance increases to 140 ohms. If the temperature coefficient of the windings at 0°C is

0.004, find the new temperature of the windings.

A. 60.4 °C

B. 59.2 °C

C. 58.4 °C

D. 53.7 °C

Problem 24: EE Board March 1998

 The resistance of a wire is 126.48 ohms at 100 °C and 100 ohms at 30 °C. Determine the

temperature coefficient of copper at 0°C.

A. 0.00427

B. 0.00615

C. 0.0256

D. 0.0356

Problem 25:

Two wires A & B made from two different materials have temperature coefficient of resistance

equal to 0.0025 and 0.0005 ohm per °C, respectively. It is desired to make a coil of wire having a

resistance of 1200 ohms with a temperature coefficient of 0.001, using suitable lengths of the two given

wires connected in series. Determine the required length of wire A?

A. 5.5 m

B. 6.2 m

C. 6.0 m

D. 5.0 m

Problem 26: EE Board October 1991

Two heating elements which is 500 ohms and 250 ohms are connected in series with temperature

coefficients of 0.001 and 0.003 ohms per °C, respectively. It is desired to make a coil of wire having a

resistance of 1200 ohms with a temperature coefficient of 0.001, using suitable lengths of the two given

wires connected in series. Determine the required length of wire A?

A. 5.5 m

B. 6.2 m

C. 6.0 m

D. 5.0 m

Problem 27:

A cylindrical rubber insulated cable has a diameter of 0.018 inch and an insulation thickness of 0.25

inch. If the specific resistance of rubber is ohm-cm, determine the insulation resistance per 1000-ft

length of the cable.

A. 624 MΩ

B. 682 MΩ

C. 678 MΩ

D. 694 MΩ

Problem 28:

The diameter of a given bare conductor is 0.50 inch. A thermoplastic insulation with thickness of 0.1

inch is wrapped around to insulate the conductor. Determine the insulation resistance of this conductor

per meter. Assume specific resistance of thermoplastic insulation to be ohm-cm.

A. Ω

B. Ω

C. Ω
D. Ω

Problem 29: EE Board October 1992

The insulation resistance of a kilometer of the cable having a diameter of 2 cm and an insulation

thickness of 2 cm is 600 ohms. If the thickness of the insulation is increased to 3 cm, find the insulation

resistance of the cable.

A. 725 ohms

B. 850 ohms

C. 757 ohms

D. 828 ohms

Problem 30: EE Board October 1998

The resistance of 120 meters of wire is 12 ohms. What is its conductance?

A. 0.0521 mho

B. 0.083 mho

C. 6 mho

D. 12 mho

ANSWER KEY

1. D 4. D 7. D

2. A 5. A 8. A

3. B 6. C 9. B
10. C 17. A 24. A

11. A 18. B 25. C

12. C 19. A 26. D

13. A 20. B 27. D

14. C 21. C 28. A

15. A 22. C 29. C

16. D 23. A 30. B

Solutions to Test 1
 DC Electric Circuits

OHM’S LAW

Ohm’s Law states that the current flowing in an electric circuit is directly proportional to the impressed

emf applied to the circuit and inversely to the equivalent resistance of the said circuit. Named after the

German physicist, Georg S. Ohm (1787 – 1854)

where: E = impressed voltage (volt)

I = current drawn (ampere)

R = resistance (ohm)

Electrical Power

 Electrical Power – rate of using or consuming the electrical energy

 Watt – unit of electrical energy equal to one joule of energy consumed in one second. Named

after the British engineer and the inventor James Watt (1736 – 1819).

where: P = electrical power (watt)

E = voltage (volt)
 I = current (ampere)

R = resistance (ohm)

ELECTRICAL & HEAT ENERGY EQUIVALENTS

 Energy – the capacity to do work

where: W = electrical energy (joule)

Q = heat energy (calorie)

P = electrical power (watt)

t = time (second)

m = mass of the material (calorie per gram - °C)

= change in temperature of the material (°C)

Note: 1 calorie ≈ 4.186 joules

1 BTU ≈ 252 calories

 Kilowatt-hour (kW-hr) – unit in which electrical energy is sold to a customer.

Note: 1 day ≈ 24 hours

1 month ≈ 30 days

1 year ≈ 365 days ≈ 8760 hours

 SERIES-CONNECED RESISTORS

 Series circuit – the resistances are connected end to end.

VOLTAGE DIVISION THEOREM (VDT) FOR RESISTORS CONNECTED IN SERIES

Note: If there are three or more resistances in series, reduce first the circuit into two resistors in series

before applying the VDT.

 PARALLEL-CONNECTED RESISTORS

 Parallel Circuit – the resistances are connected across each other.

Note: Independent of the circuit connection either series, parallel or combination of both, the total

power drawn by the circuit is equivalent to the powers drawn by each load resistor.

CURRENT DIVISION THEOREM FOR RESISTORS CONNECTED IN PARALLEL

Note: If there are three or more resistances in parallel, reduce first the circuit into two resistors in

parallel before applying the CDT.

SERIES-PARALLEL CONNECTED RESISTORS

 Series-Parallel Circuit – a combinational circuit which when simplified will result into a series

circuit.

PARALLEL-SERIES CONNECTED RESISTORS

 Parallel-series circuit – a combinational circuit which when simplified will result into a parallel

circuit.
 DELTA & WYE CONNECTED RESISTORS

 Wye to delta transformations

 Delta to wye transformations

 If A = B = C = and X = Y = Z =
 Test 2

Problem 31: EE Board October 1997

A load of 10 ohms was connected to a 12-volt battery. The current drawn was 1.18 amperes.

What is the internal resistance of the battery?

A. 0.35 ohm

B. 0.20 ohm

C. 0.25 ohm

D. 0.30 ohm

Problem 32:

The potential at the terminals of the battery falls from 9 V on open circuit to 6 volts when a

resistor of 10 ohms is connected across its terminals. What is the internal resistance of the battery?

A. 5 Ω

B. 4 Ω

C. 3 Ω

D. 2 Ω

Problem 33: EE Board April 1997

The electromotive force of a standard cell is measured with a potentiometer that gives a reading

of 1.3562 V. When a 1.0 megaohm resistor is connected across the standard cell terminals, the

potentiometer reading drops to 1.3560 V. What is the internal resistance of the standard cell?

A. 174.5 ohms
B. 145.7 ohms

C. 147.5 ohms

D. 157.4 ohms

Problem 34:

A battery is formed of five cells joined in series. When the external resistance of 4 ohms, the

current is 1.5 A and the external resistance is 9 ohms, the current fails to 0.75 A. find the internal

resistance of each cell.

A. 0.5 ohm

B. 1.0 ohm

C. 0.2 ohm

D. 0.3 ohm

Problem 35: EE Board April 1988

A barangay power station supplies 60kW to a load over 2,500 ft, 10 , two conductors

copper feeder, the resistance if which is 0.078 ohm per 1000 ft. the bus bar voltage is maintained

constant at 600 V. Determine the load current.

A. 105 A

B. 108 A

C. 110 A

D. 102A
Problem 36:

A 120 V DC motor draws current if 100 A is located 1000ft from the supply source. If the

diameter of the copper transmission line is 0.45 inch, what must be the voltage of the supply.

A. 125.32 V

B. 130.24 V

C. 129.32 V

D. 127.05 V

Problem 37:EE Board October 1986

A LRT car, 5 km distance rom the Tayuman, take 100 over a 100 mm har drawn coper trolley

wire having a resistance of 0.270 ohm per km. The rail and ground return has a resistance of 0.06 per

km. if the station voltage is 750 V what is the voltage of the car?

A. 585 V

B. 590 V

C. 585 V

D. 590 V

Problem 28:

The hot resistance of an incandescent lamp 10 ohms and the rated voltage is 50 V. Find the

series resistance required to operate the lamp from an 80 V supply.

A. 8Ω

B. 4Ω
C. 6Ω

D. 10Ω

Problem 39:

A resistive coil draws 2 A at 110 V after operating for a long time. If the temperature rise is 55

°C, calculate the external resistance which must be initially connected inn series with the coil to limit the

current to 2 A. The temperature coefficient of the material if the coil is 0.0043 per °C to 2 °C

A. 10.12 ohms

B. 10.52 ohms

C. 11.45 ohms

D. 12.05 ohms

Problem 40:

A carbon resistor dissipates 60 W of power from a 12 V source at 20°C. How much power will be

dissipated in the resistor at 120°C if connected across the same source? Assume the temperature

coefficient if the carbon at 20 °C is -0.0005 per °C.

A. 61.50 W

B. 62.21 W

C. 62.34 W

D. 63.16 W
Problem 41: EE Boar April 1981, EE Board October 1984

Two (2) 115-V incandescent lamps A and B are connected in series across 230-V source. If the

lamp A is rated 75 watts and lamp B is rated 50 watts, determine the current drawn by the series

connection

A. 0.52 A

B. 0.64 A

C. 0.48 A

D. 0.57 A

Problem 42:

An arc lamp takes 10 A at 50 volts. A resistance R is to be place is series so that the lamp may

burn correctly from 110 V supply. Find the power wasted in this resistor.

A. 800 watts

B. 600 watts

C. 700 watts

D. 900 watts

Problem 43:

Conductor “x” of a certain material and a given cross section has a resistance of 0.1 ohm per

meter and a temperature coefficient if 0.005 per °C. Conductor “y” of another material and a given cross

section has resistance of 0.5 ohms per meter and a temperature coefficient of 0.001 per °C. is desired to
make a coil having a resistance if 500 ohms and a temperature and a coefficient of 0.002 by using

suitable lengths of the two wires connected in series. Calculate the required length of wire “x”.

A. 1225 m

B. 1250 m

C. 1240 m

D. 1210 m

Problem 44: EE Board April 1997

If a resistor rated at 5 watts and 6 volts are connected across a battery with a open circuit

voltage of 6 volts. What is the internal resistance if the battery if the resulting current is 0.8 A?

A. 0.30 ohm

B. 0.26 ohm

C. 0.23 ohm

D. 0.03 ohm

Problem 45:

A high voltage DC transmission line delivers 1000 MW at 500 k V to an aggregate load over a

distance of 900 km. determine the voltage at the sending end. Assume the loop resistance of the line to

be 1mΩ per km.

A. 510.5 kV

B. 505.2kV

C. 507.7 kV
D. 503.6 kV

Problem 46: EE Board April 1989

It is required that a loading if 3 kW be maintained in a heating element at an initial temperature

of 20°C, a voltage of 220 V is necessary of the purpose. After the element has settled down to steady

state, it is found that a voltage of 240 volts is necessary to maintain the 3kW loading. The element

resistance temperature coefficient is 0.0006 per degree centigrade at 20°C. Calculate the final

temperature of the heating element.

A. 345.43 °C

B. 326.42 °C

C. 336.84 °C

D. 318.48 °C

Problem 47:

A 200-W, 110-V incandescent lamp has a filament having a temperature coefficient of resistance

equal to 0.005 at 0°C. if the normal operating temperature of the bulb is 2500 °C, how much current will

the bulb draw at the instant it is turned on. Assume a room temperature of 20 °C.

A. 29.42 A

B. 18.37 A

C. 22.31 A

C. 28. 21 A
Problem 48:

The power drawn by the resistive coil made of copper wire is 220 W at 100 V and 20 °C.

calculate the power consume by the coil at 115 V and 100 °C. the temperature of resistance at 20 °C is

0.00393

A. 175 W

B. 211 W

C. 183 W

D. 225 W

Problem 49:

An electric water heater has a rating of 1kW, 230 V. The coil used as the heating element is 10m

long and has a resistivity of 1.724 x ohm-cm. determine the required diameter of the wire in mils?

A. 2.43 mils

B. 2.52 mils

C. 3.21 mils

D. 1.35 mils

Problem 50:

When two resistors A and B are connected in series, the total resistance is 36 ohms. When

connected in parallel, the total resistance is 8 ohms. What is the ration or the resistance to resistance

. Assume <

A. 0.5
B. 0.4

C. 0.8

D.0.6

Problem 51: EE Board March 1998

Three resistors of 10,15 and 20 ohms each are connected in parallel. What is the equivalent

resistance?

A. 45 ohms

B. 17.2 ohms

C. 0.22 ohms

D. 4.62 ohms

Problem 52:

The equivalent resistance of three resistors A, B and C connected in parallel is 1.714 ohms. If A is

twice of B and C is half as much as B, find the equivalent resistance when the three of them are

connected in series.

A. 17.5 ohms

B. 21 ohms

C. 24.5 ohms

D. 28.0 ohms

Problem 53:
 Three resistors of 10, 12 and 15 ohms are connected in parallel. Evaluate the value of current to

the parallel system that will make the current in the 10 ohm resistor equal to 2 A.

A. 5 A

B. 6 A

C. 4 A

D. None of these

Problem 54:

Three resistors of 10, 12 and “x” ohms, respectively are connected in parallel across a constant

current source of 8 A. Determine “x” if this resistor draws 2.5 A.

A. 10 Ω

B. 12 Ω

C. 13 Ω

D. 11 Ω

Problem 55:

Two resistors A and B made of different materials have temperature coefficients of resistance at

20 °C of 0.004 and 0.006 respectively. When connected across a voltage source at 20 °C, they draw

current equally. What percentage of the total current at 100 °C does resistor A carry?

A. 47.14%

B. 52.86%

C. 61.34%
D. 38.66%

Problem 56:

Two resistors A and B made of different materials have temperature coefficients of resistance of

0.003 and 0.005, respectively. When connected in parallel across a voltage source at 15 °C, it consumes

equal power. What is the ratio of the power drawn by resistor B to that in resistor A when temperature

rises to 60 °C? Assume supply voltage is constant.

A. 0.829

B. 0.926

C. 0.964

D. 0.882

Problem 57: EE Board March 1998

Three resistors of 10, 15 and 20 ohms each are connected in parallel. What is the total

conductance?

A. 0.217 mho

B. 3.41 mhos

C. 4.62 mhos

D. 0.52 mho

Problem 58:
 Two heating units x and y are connected across a 100 V supply. Unit y takes twice as much

power as unit x. Total power supplied by the source is 2280 watts. Determine the total power drawn by

the heating units if they are connected in series across the same source.

A. 615.32 W

B. 506.58 W

C. 582.45 W

D. 604.38 W

Problem 59:

Three resistors are connected in series-parallel with in series with the parallel

combination of and . The whole combination is connected across a 120 V DC source. Resistors

take 750 W, 250 W and 200 W, respectively. Calculate the resistance .

A. 8.10 Ω

B. 8.52 Ω

C. 7.84 Ω

D. 9.22 Ω

Problem 60:

Two lamps X and Y are connected in series. Lamp X is rated 50 W at 100 V while lamp Y is rated

at 100 W at 100 V also. The two lamps are to be connected in series across a 200 V source. What

resistance must be connected across lamp A so that each lamp will operate properly?

A. 150 ohms
B. 100 ohms

C. 200 ohms

D. 180 ohms

Problem 61: EE Board October 1997

A 5-ohm resistance is connected in parallel with a 10-ohm resistance. Another set, a 6-ohm and

an 8-ohm resistances are also connected in parallel. The two sets are connected in series. What is the

equivalent resistance?

A. 6.76 ohms

B. 9.25 ohms

C. 14.4 ohms

D. 21.2 ohms

Problem 62: EE Board March 1998

Two resistances of 10 and 15 ohms each respectively are connected in parallel. The two are then

connected in series with a 5-ohm resistance. What is the equivalent resistance?

A. 11 ohms

B. 12 ohms

C. 10 ohms

D. 9 ohms

Problem 63:
 From the circuit as shown, determine the resistance between terminals a& b.

A. 1 000 Ω

B. 1 923 Ω

C. 2 083 Ω

D. 2 352 Ω

Problem 64: EE Board October 1997

A 10-ohm and a 20-ohm resistance are connected in parallel. Another resistance of 5-ohm is

connected in series with the two. If the supply voltage is 48 volts, what is the current through the 10-

ohm resistance?

A. 3.21 A

B. 2.74 A

C. 4.02 A

D. 5.72 A

Problem 65:

A 30-ohm resistor is connected in parallel with a variable resistance R. The parallel combination

is then connected in series with a 6-ohm resistor and connected across a 120 V source. Find the

minimum value of R if the power taken by R is equal to the power taken by the 6-ohm resistor.

A. 10.35 Ω

B. 12.24 Ω

C. 10.24 Ω
D. 11.46 Ω

Problem 66: EE Board March 1998

Two resistances of 10 and 15 ohms, each respectively are connected in parallel. The two are

then connected in series with a 5-ohm resistance. It is then connected across a 12-V battery, what are

the current and power?

A. 1.2 A, 17.28 W

B. 0.96 A, 11.52 W

C. 1.09 A, 13.1 W

D. 1.5 A, 20.25 W

Problem 67

An 8-ohm resistor is connected in series with a parallel combination of two resistors, R and 24

ohms. Determine R if the power consumed by the parallel-connected resistors is equal to the power

consumed by the 8-ohm resistor.

A. 10 ohms

B. 16 ohms

C. 12 ohms

D. 20 ohms

Problem 68
 A multi-tap resistor R is connected across a 220-V supply. A voltmeter whose internal resistance

is 15-kΩ is connected across the center tap and one end of the supply terminals. If the voltmeter

registers 100 V, what is the value of resistor R.

A. 5.5 kΩ

B. 5.0 kΩ

C. 6.0 kΩ

D. 6.5 kΩ

Problem 69

A potential divider of resistance of 50 ohms is connected across a 100 V DC source. A load

resistance of 10 ohms is connected across a tap in the potential divider and the negative terminal of the

source. If a current of a 4 A flows towards the load, what is the current supplied by the source?

A. 5.32 A

B. 5.05 A

C. 5.21 A

D. 5.48 A

Problem 70

Two resistors A and B are connected in series across a 220 V DC source. When a voltmeter with

an internal resistance of 10 kΩ ohms, is connected across resistor A, the instrument reads 100 V and

when connected across resistor B, it reads 80 volts. Find the resistance of resistor A.

A. 4 kΩ
B. 3 kΩ

C. 5 kΩ

D. 6 kΩ

Problem 71: EE Board April 1992

An electric kettle was marked 500 W, 230 V found to take 15 minutes to bring 1 kilogram of

water at 15 °C to boiling point. Determine the heat efficiency of the kettle.

A. 79.1%

B. 75.3%

C. 72.4%

D. 74.8%

Problem 72: EE Board October 1997

A process equipment contains 100 gallons of water at 25 °C. It is required to bring it to boiling in

10 minutes. The heat loss is estimated to be 5%. What is the kW rating of the heater?

A. 125 kW

B.252 kW

C. 50.5 kW

D. 207 kW

Problem 73: EE Board October 1989

 A total of 0.8 kg of water at 20 °C is placed in a 1-kW electric kettle. How long a time in minute is

needed to raise the temperature of the water to 100 °C?

A. 4.46 min

B. 5.32 min

C. 6.34 min

D. 4.56 min

Problem 74: EE Board October 1998

How many calories does an electric heater of 100 watts generate per second?

A. 10

B. 23.88

C. 1000

D. 42.25

Problem 75: EE Board 1997

The electric energy required to raise the temperature of water in a pool is 1000 kWh. If the heat

losses are 25%, the heating energy required will be .

A. 1111 kWh

B. 1266 kWh

C. 1750 kWh

D. 1333 kWh
Problem 76: EE Board April 1992

An electric heater carries 12 A at 110 V, is submerged in 22.5 lbs of water for 30 minutes. What

will be the final temperature of the water if its initial temperature is 35 °F?

A. 135.43 °F°

B. 125.42 °F

C. 133.56 °F

D. 128.33 °F

Problem 77: EE Board October 1990

In an electric heater the inlet temperature is 15 °C. Water is flowing at the rate of 300 grams per

minute. The voltmeter measuring voltage across the heating element reads 120 volts and an ammeter

measuring current taken reads 10 amperes. When steady state is finally reached, what is the final

reading of the outlet thermometer?

A. 57.6 °C

B. 68.4 °C

C. 72.6 °C

D. 42.6 °C

Problem 78: EE Board October 1991

Four cubic meters of water is to be heated by means of four 1.5 kW, 230-V immersion heating

elements. Assuming the efficiency of the heater as 90% determine the time required boiling the water iif

the initial temperature is 20 °C and if all four elements are connected in parallel.
A. 71 hrs

B. 63 hrs

C.69 hrs

D. 66 hrs

Problem 79: EE Board October 1991

Four cubic meters of water is to be heated by means of four 1.5 kW, 230-V immersion heating

elements. Assuming the efficiency of the heater as 90% determine the time required boiling the water if

the initial temperature is 20 °C and if the elements are connected two in series in parallel with two in

series.

A. 275.6 hrs

B. 295.3 hrs

C. 252.2 hrs

D. 264.4 hrs

Problem 80: EE Board April 1997

A circuit consisting of three resistors rated: 10 ohms, 15 ohms and 20 ohms are connected in

delta. What would be the resistances of the equivalent wye connected load?

A. 0.30, 0.23 and 0.25 ohm

B. 3.0, 4.0 and 5.0 ohms

C. 3.33, 4.44 and 6.66 ohms

D. 5.77, 8.66 and 11.55 ohms

Problem 81: EE Board October 1994

The equivalent wye element of 3 equal resistors each equal to R and connected in delta is

A. R

B. 3/2 R

C. R/3

D. 3R

Problem 82:

Three resistors of 6-ohm resistance are connected in delta. Inside the delta another three 6-ohm

resistors are connected in wye. Find its resistance between any two comers.

A. 2 ohms

B. 3 ohms

C. 4 ohms

D. 1 ohm

ANSWER KEY

31. B 36. B 41. A

32. A 37. A 42. B

33. C 38. C 43. B

34. C 39. B 44. A

35. B 40. D 45. D

46. C 59. A 71. A

47. C 59. C 72. D

48. C 60. C 73. A

49. B 61. A 74. B

50. A 62. A 75. D

51. D 63. B 76. A

52. B 64. B 77. C

53. A 65. D 78. C

54. B 66. C 79. A

55. B 67. C 80. C

56. B 68. C 81. C

57. A 69. B 82. B

58. B 70. C
Solutions to Test 2
 Network Laws & Theorems

KIRCHHOFF’S LAW

Named after the German physicist, Gustav Robert Kirchhoff (1824-1887)

 Current Law (KCL) – the algebraic sum of the currents at any junction or note of an electric

circuit is zero.

 Voltage Law (KVL) – the algebraic sum of the emf’s and the resistance voltage drops in any

closed loop of an electric circuit is zero.

Sign Conventions for Kirchhoff’s Law

 Current towards the node, positive current.

 Current away from the node, negative current.

 In a voltage source, if loop enters on minus and goes out on plus, positive emf.

 In a resistance, if the loop direction is the same as the current direction negative resistance

voltage drop

 In a resistance, if the loop direction is opposite to the current direction, possible resistance

voltage drop.
Note: Currents are evaluated by simultaneous substitutions of the equations formulated

using KCL and KVL

MAXWELL’S MESH METHOD

This method involves a set of independent loop currents assigned to as many meshes as it exist in the

circuit and these currents are employed in connection with appropriate resistances when the KVL

equations are written.

Example:

By KVL:

for loop A:
 for loop B:

Note: Mesh currents are evaluated by simultaneous substitutions of the equations formulated

from each loop or mesh using KVL

SUPERPOSITION THEOREM

In a network of resistors, the current in any resistor is equal to the algebraic sum of the currents

delivered by each independent sources assuming that each source is acting alone or independently with

respect to the others.

Note: If a source (either a current or voltage source) is acting alone, the other current sources are open

circuited while the other voltage sources are short circuited.

Note: The currents are evaluated using basic electric circuit principles.

NODAL NODE METHOD

Using this method, a circuit with “n” nodes, has a solution with only “n – 1” number of equations

needed.

Note: Since there are three (n = 3) nodes in this circuit, therefore only two equations are needed to

solve this problem.

By KCL at node a:

By KCL at node b:

Note: Node voltages are evaluated by simultaneous substitutions of the equations from

formulated using KCL and correspondingly, currents flowing through each resistance can be solved.

Thevenin’s Theorem

If a resistor of R ohms be connected between any two terminals of a linear network, the resulting steady

state current through the resistor is the ratio of the potential difference (between the two points

prior to the connection) and the sum of the values of the resistance (resistance between the two

points) and the connected resistance R. Named after the French telegraph engineer, Charles Leon

Thevenin (1857 – 1926)

Thevenin’s equivalent circuit:

Example: Solve for .

Solution:

Step 1: Open circuit , and solve for the voltage across the open circuited terminals.

Note: is computed using any methods (Kirchhoff’s, Maxwell, Nodal,etc. . .) of analyzing network

problem.

Step 2: Compute (short circuit all independent voltage sources and open circuit all independent

current sources).

Note: is computed using the basic principles of finding the total resistance of a given circuit.

Step 3: Construct the Thevenin’s equivalent circuit and solve the resulting current.
 NORTON’S THEOREM

This theorem is analogous to Thevenin’s theorem except that instead of the open circuit test, this

theorem uses the short circuit test and the equivalent circuit is a parallel circuit. Named after the

American engineer, E. L. Norton (1898 - )

Norton’s equivalent circuit:

Example: Solve for .

Step 1: Short circuit and solve the short circuit current that flows towards the branch.
Note: is computed using any methods (Kirchhoff’s, Maxwell, Nodal, etc.) of analyzing network

problems.

Step 2: Compute

Note: is computed using the basic principles of finding the total resistances of a given circuit.

Step 3: Construct the Norton’s equivalent circuit and solve for .

MILLMAN’S THEOREM

When any number of voltage sources of arbitrary generated voltage and finite internal resistance

different from zero are connected in parallel, the resulting voltage across the parallel combination is the

ratio of the algebraic sum of the currents that each source individually delivers when short circuited to

the algebraic sum of the internal conductance.

Millman’s equivalent circuit:

Example: Solve

Step 1: Draw the Millman’s equivalent circuit and solve for

Step 2: Solve for

SOURCE TRANSFORMATION METHOD

This method simplifies the number of meshes in the network and thus simplifies the number of

equations needed.

 Voltage source to current source

 Current source to voltage source

Example: Solve for

Step 1: Transform the voltage and current sources to their equivalents

Step 2: Simplify the parallel branch and transform back the current source to an equivalent voltage

source.

Step 3: By KVL (using the given loop direction), can then be solved.

MAXIMUM POWER TRANSFER THEOREM

Maximum power transferred to a load resistor occurs only when the said resistor has a value equal

to the resistance ( ) of the network looking back from the load terminals.

Example: Find R if it is to absorbed maximum power.

Solution: Open circuit resistor R, short circuit all independent voltages sources and open all

independent current sources.

Note: If the corresponding current or power drawn by resistor R is to be solved, use either

Thevenin’s or Norton’s theorem to solve the problem.

 Test 3

Problem 83: EE Board October 1998

A 12 V battery of 0.05-ohm resistance and another battery of 12 V and 0.075 ohm resistance

supply power to a 2-ohm resistor. What is the current through the load?

A. 5.85 A

B. 5.63 A

C. 5.72 A

D. 5.91 A

Problem 84:

Two equal resistances are connected in parallel across a 150 V DC source. What potential

difference exists between the midpoint of one resistance and a point that is one-third from either

end of the other resistance.

A. 24 V

B. 28 V

C. 25 V

D. 30 V

Problem 85: EE Board April 1989

The LRT trolley system 10 miles long is fed by two substations that generate 600 volts and 560

volts, respectively. The resistance of the trolley wire and rail return is 0.3 ohm per mile. If the car is
located 4 miles from the 600-volt station draws 200 A from the line. How much is the current

supplied by each station?

A. 133.33 A, 66.67 A

B. 123.67 A, 76.33 A

C. 117.44 A, 82.56 A

D. 125.54 A, 63.05 A

Problem 86:

Ten cells each of emf 1.5 volts and internal resistance of 0.2 ohm are joined in parallel and

connected to an external circuit resistance of 3 ohms. What current the load draws?

A. 0.45 A

B. 0.65 A

C. 0.50 A

D. 0.48 A

Problem 87:

Two batteries A and B are connected across each other with terminals of the same polarity

together. The open circuit emf and internal resistance of each battery is respectively 24 V and 1.5Ω.

Determine the resistance of a heating load connected across the parallel combination of batteries so

that the power consumed in the load is 100 watts.

A. 4.16 Ω

B. 4.22 Ω
C. 4.02 Ω

D. 4.12Ω

Problem 88: EE Board October 1996

The lead storage batteries “A” and “B” are connected in parallel “A” has an open circuit voltage

of 12 V and an internal resistance of 0.2 ohm. Battery “B” has an open circuit circuit voltage of 12.2

V and an internal resistance of 0.3 ohm. If the two batteries together delivers power to a 0.5 ohm

power resistor. Neglecting effects of temperature, how much current is contributed by battery “A”?

A. 29.62 A

B. 16.00 A

C. 12.85 A

D. 25.24 A

Problem 89:

Three resistors of 2-ohm resistance are connected in delta. Inside the delta another three 2-ohm

resistors are connected in wye. Six batteries of negligible internal resistance and of different emf are

inserted into each branch. Using an ammeter, the current in one of the delta branch was found out

to be 3 A. If a 4-ohm resistance is inserted into that branch, what will be the new current?

A. 2.00 A

B. 1.75 A

C. 1.50 A

D. 1.25 A
Problem 90: EE Board April 1992

In Manila, the LRT runs between Gil Puyat Station and Tayuman Station, which is 4 km apart and

maintains voltages of 420 volts and 410 volts respectively. The resistance of go and return is 0.05

ohm per km. The train draws a constant current of 300 A while in motion. What are the currents

supplied by the two stations if the train is at the distance of minimum potential?

A. 175 A, 125 A

B. 183 A, 117 A

C. 164 A, 136 A

D. 172 A, 128 A

Problem 91: EE Board October 1986

A LRT car, 5 km distance from the Tayuman, takes 100 A over a 100 mm hard drawn copper

trolley wire having a resistance of 0.270 ohm per km. The rail and ground return has a resistance of

0.06 ohm per km. If the station voltage is 750 V, what is the efficiency of transmission?

A. 78%

B. 81%

C. 74%

D. 79%

Problem 92:

A resistance R is connected across two batteries A and B connected in parallel. The open circuit

emfs and internal internal resistances of the batteries are 12 V, 2 ohms and 8 V, 1 ohm, respectively.

Determine the ohmic value of R if the power absorbed by R is 7.656 watts.

A. 10 Ω

B. 12 Ω

C. 9 Ω

D. 8 Ω

Problem 93: EE Board October 1981

A charger, a battery and a load are connected in parallel. The voltage across the charger is 12.5

volts and the battery has and the battery has an emf of 12 volts and internal resistance of 0.1 ohm.

The load consists of a 2 ohms resistor. Find the current through the charger.

A. 6.61 A

B. 6.25 A

C. 6.42 A

D. 6.50 A

Problem 94: EE Board October 1986

A lead storage battery is rated at 12 volts. If the internal resistance is 0.01 ohm, what is the

maximum power that can be delivered to the load?

A. 1,200 W

B. 3,600 W

C. 7,200 W

D. 1,800 W
Problem 95: EE Board April 1995

A 120-V battery having an internal resistance of 0.5 ohm, is connected through a line resistance

of 9.5 ohms to a variable load resistor. What maximum power will the battery battery deliver to the

load resistor?

A. 36 watts

B. 63 watts

C. 630 watts

D. 360 watts

Problem 96:

Two resistors x and y are connected in parallel. Resistor x having a value of 6 ohms while resistor

y being adjustable over a wide range. The parallel combination is then connected through a 2-ohm

line resistor to a 120 V DC source. For what resistance y will its power be the greatest?

A. 8.0 Ω

B. 1.5 Ω

C. 2.0 Ω

D. 1.8 Ω

Problem 97: EE Board April 1988

A barangay power station supplies 60 kW to a load over 2,500 ft, 100 , two-conductor

copper feeder, the resistance of which is 0.078 ohm per 1000 ft. The bus bar voltage is maintained

constant at 600 V. Determine the maximum power which can be transmitted.

A. 230.77 kW

B. 220.35 kW

C. 242.73 kW

D. 223.94 kW

Problem 98:

A variable resistor R is connected in parallel with a fixed resistor of 1.25 ohms. The combination

is then connected across a 12 V battery with internal resistances 0.25 ohm. Solve for the maximum

power the maximum power that can be delivered to resistor R.

A. 130.20 W

B. 115.52 W

C. 120.21 W

D. 142.42 W

Problem 99: EE Board April 1991

Twelve similar wires each of resistance 2 ohms are connected so as to form a cube. Find the

resistance between the two diagonally opposite corners.

A. 1.45 ohms

B. 1.66 ohms

C. 2.01 ohms

D. 1.28 ohms
 Problem 100: EE Board April 1991

Twelve similar wires each of resistance 2 ohms are connected so as to form a cube. Find the

resistance between the two corners of the same edge.

A. 1.133 Ω

B. 1.102 Ω

C. 1.125 Ω

D. 1.167 Ω

ANSWER KEY

83. D 94. B

84. C 95. D

85. A 96. B

86. C 97. A

87. D 98. C

88. C 99. B

89. C 100. D

90. A

91. A

92. A

93. D
Solutions to Test 3
 NETWORK LAWS AND THEOREMS

Kirchhoff’s Law

Named after the German physicist, Gustav Robert Kirchhoff (1824 – 1887)

 Current Law (KCL) – the algebraic sum of the currents at any junction or node of an
electric circuit is zero.
 Voltage Law (KVL) - the algebraic sum of the emf’s and the resistance voltage drops
in any closed loop of an electric circuit is zero

Sign Conventions for Kirchhoff’s law

 Current towards the node, positive current.

 Current away from the node, negative current.
 In a voltage source, if loop enters on minus and goes out on plus, positive emf.
 In a voltage source, if loop enters on plus and goes out on minus, negative emf.
 In a resistance, if the loop direction is the same as the current direction, negative
resistance voltage drop
 In a resistance, if the loop direction is opposite to the current direction, positive
resistance voltage drop

Note: Currents l1, l2 and l3 are evaluated by simultaneous substitutions of the equations
formulated using KCL and KVL.

Maxwell’s mesh method

This method involves a set of independent loop currents assigned to as many meshes
as it exist in the circuit and these currents are employed in connection with appropriate
resistances when the KVL equations are written.

Note: Mesh currents la and lb are evaluated by simultaneous substitutions of the equations
formulated from each loop or mesh using KVL.

Superposition Theorem

In a network of resistors, the current in any resistor is equal to the algebraic sum of the
currents delivered by each independent sources assuming that each source is acting alone or
independently with respect to the others.

Note: if a source (either a current or a voltage source) is acting alone, the other current
sources are open circuited while the other voltage sources are short circuited.
Nodal Node Method

Using this method, a circuit with “n” nodes, has a solution with only “n – 1” number of
equations needed.
Note: Since there are three (n = 3) nodes in this circuit, therefore only two equations are
needed to solve this problem.

Note: Node voltages Va and Vb are evaluated by simultaneous substitutions of the equations
formulated using KCL and correspondingly, currents flowing through each resistances can be
solved.

Thevenin’s Theorem

If a resistor of R ohms be connected between any two terminals of a linear network, the
resulting steady state current through the resistor is the ratio of the potential difference E 0
(between the two points prior to the connection) and the sum of the values of the resistance
R0 (resistance between the two points) and the connected resistance R. Named after the
French telegraph engineer, Charles Leon Thevenin (1857 – 1926).
Solution:

STEP 1: Open circuit R, and solve for the voltage across the open circuited terminals

Note: E0 is computed using any methods (Kirchoff’s, Maxwell, Nodal, etc..) of analyzing
network problems.

Step 2: Compute R0 (short circuit all independent voltage sources and open circuit all
independent current sources.)
Note: R0 is computed using the basic principles of finding the total resistance of a given circuit.

STEP 3: Construct Thevenin’s equivalent circuit and solve the resulting current

Norton’s Theorem

This theorem is analogous to Thevenin’s theorem except that instead of the open circuit test,
this theorem uses the short circuit test and the equivalent circuit is a parallel circuit. Named
after the American Engineer, E. L. Norton (1898 - ).
STEP 1: Short circuit R1 and solve the short circuit current that flows towards the branch.

Note: l5C is computed using any methods (Kirchoff’s, Maxwell, Nodal, etc..) of analyzing
network problems.

STEP 2: Compute R0

Note: R0 is computed using the basic principles of finding the total resistance of a given circuit.

STEP 3: Construct Thevenin’s equivalent circuit and solve for l 5

Millman’s Theorem

When any number of voltage sources of arbitrary generated voltage and finite internal
resistance different from zero are connected in parallel the resulting voltage across the
parallel combination is the ratio of the algebraic sum of the currents that each source
individually delivers when short circuited to the algebraic sum of the internal conductance.

STEP 1: Draw the Millman’s equivalent circuit and solve for Vsb
STEP 2: Solve for l1, l2 and l5

Source Transformation Method

This method simplifies the number of meshes in the network and thus simplifies the number
of equations needed.

 Voltage source to current source

 Current source to voltage source

STEP 1: Transform the voltage and current sources to their equivalents

STEP 2: Simplify the parallel branch and transform back the current source to an equivalent
voltage source.

STEP 3: By KVL (using the given loop direction). L5 can then be solved

Maximum Power Transfer Theorem

Maximum power transferred to a load resistor occurs only when the said resistor has a value
equal to the resistance (R0) of the network looking back from the load terminals.
Example: Find R if it is to absorbed maximum power

Solution: Open circuit resistor R, short circuit all independent voltages sources and open all
independent current sources.

Note: If the corresponding current or power drawn by resistor R is to be solved, use either
Thevenin’s or Norton’s theorem to solve the problem.

101. Twelve identical wires of resistance 6 ohms are arranged to form the edge of a cube. A
current of 40 mA is led into the cube at one corner and out at the other diagonally opposite
corner. Calculate the potential difference developed between these corners.

A. 0.20 V

B. 0.28 V

C. 0.22 V

D. 0.24 V

102. Find the value of the voltage V.

 A. 12. 34 V
B. 11.24 V
C. 12.19 V
D. 11.66 V

103. Referring to the circuit diagram below, if the charger voltage is 130 volts and the battery
voltage is 120 volts, solve for the current Id.

A. -0.215 A
B. 0.215 A
C. -0. 316 A
D. 0. 316 A

104. In the figure below R1 = 1 ohm, R2 = 1 ohm, R3 = 3 ohms, I2 = 2 A and Va = 120 V. Find Eg.

A. 182.41 V
B. 153. 32 V
C. 164.67 V

105. In the dc circuit as shown, the high resistance voltmeter gives a reading of +0.435 volt.
What is the value of the resistance R?

A. 4 ohms

B. 5 ohms
c. 3 ohms

D. 2 ohms

106. Determine I in the figure.

A. 0.028 A
B. 0.010 A
C. 0.025 A
D. 0.014 A

107. Solve for I using source transformation method.

A. 0.32 A
B. 0.25 A
C. 0.38 A
D. 0.27 A

108. Solve for V using Maxwell’s mesh method.

A. 4.0 V
B. 5.2 V
C. 2.6 V
D. 3.4 V

109. Determine the current in the 1-ohm resistor using Norton’s theorem.
 A. 1.54 A
B. 1.25 A
C. 1.60 A
D. 1. 33 A

110. Determine the current in the 10-ohm resistor using Thevenin’s Theorem.

A. 0.833 A
B. 0.667 A
C. 0.707 A
D. 0.508 A

111. Determine the current in the 6-ohm resistor by Superposition Theorem.

A. 3.4 A
B. 4.2 A
C. 4.0 A
D. 3.8 A

112. Determine the looking back resistance between terminals a & b.

A. 11 ohms
B. 9 ohms
C. 10 ohms
 D. 12 ohms

113. Determine I.

A. 4.50 A
B. 4.28 A
C. 5. 34 A
D. 3.75 A

114. Determine the voltage V.

A. 14 V
B. 12 V
C. 10 V
D. 16 V

SOLUTIONS:

101.

102.
103.

104.
105.

106.
107.
108.

109.
110.
111.
112.
113.

114.
 Electrostatic

Coloumb’s Law

 First law of electrostatistics: Like charges repel each other and unlike charges attract
each other.
 Second law of electrostatistics: The force of attraction or repulsion between charges
is directly proportional to the product of two charges and inversely proportional to the
square of the distance between them.

Electrostatic Potential

Electrostatic potential – The electric potential resulting form the location of charged bodies in
the vicinity

Where: V = electrostatic potential (volt) at a distance of d (meter) from a charge body of

charge Q (coulomb)

Electric Field Intensity

Electric Field Intensity - the force per unit charge that will act at a point in the field on a very
small test charge placed at that location.

Where E = electric intensity (newton per coulomb)

D = distance in meters of the test charge (1 C) to the charge (+Q) body

 Electric field outside an isolated sphere in free space

Where E = electric field intensity (volt per meter) at a distance r (meter) from the center of an
isolated charged sphere located in free space.

Q = total charge (coulomb) which is distributed uniformly on the sphere

 Electric field intensity created by an isolated, charged long cylindrical wire in free
space

Where: E = electric field (volt per meter)

Δ = charge per unit of length ( coulomb per meter) distributed uniformly over the
surface of the isolated cylinder.

R = distance in meter from the center of the cylinder to the point at which the electric
field intensity is evaluated.

Electric Flux Density

Where D = electric flux density (coulomb per square meter)

Ψ = electric flux (coulomb)

A = area perpendicular to electric flux ( square meter)

Capacitance

Capacitance is a measure of how well a capacitor can store electrical charges

 Capacitor (old name is Condenser) – any device on which electric charges can be
stored so as to posses electrical potential. It consists of two conducting plates
separated by a layer of an insulating medium called dielectric.
 Farad (F) – unit capacitance when one coulomb of charge given to its plates raises its
potential difference by one volt. Named after the British physicist and chemist who
discovered electromagnetic induction. Michael Faraday (1791 – 1867).

Where C = capacitance of a charge capacitor (farad)

Q = charge stored (coulomb)

E = voltage across the capacitor (volt)

Capacitance of a two parallel – plate capacitor with a uniform dielectric medium

Where: C = capacitance (farad)

A = area of each plate (square meter)

D = thickness of dielectric material (meter)

K = ∑c∑f = dielectric constant

∑a = absolute permittivity

∑f = relative permittivity of the dielectric

 Capacitance of an “n” parallel – plate capacitor having the same type of dielectric
material and thickness of dielectric

Where: n = number of plates

 Capacitance of an “n” parallel-plate capacitor with different dielectric material and
thickness of insulation

 Capacitance of a two parallel-plate capacitor with a medium partly air.

 Capacitance of an isolated sphere

 Capacitance of a concentric spherical capacitor

 Capacitance of a coaxial cable (farad per meter)

  Capacitance of a two-wire line (parallel-capacitor) with opposite charges (farad per
meter)

SERIES CONNECTED CAPACITORS

VOLTATAGE DIVISION THEOREM FOR CAPACITORS CONNECTED IN SERIES

PARALLEL-CONNECTED CAPACITORS
CHARGE DIVISION THEOREM FOR CAPACITORS CONNECTED IN PARALLEL

ENERGY STORED IN A CHARGE CAPACITOR

Where W = energy stored (joule)

C = capacitance (farad)

E = voltage across (volt)

Q = charge accumulated (coulomb)

Elastance

Elastance is the reciprocal of capacitance

Where: S = elastance (reciprocal of farad or daraf)

115. Three equal positive charges of 10 stat coulomb each are located at the vertices of an
equilateral triangle of 2 cm leg. What is the magnitude of the force acting on each charge?

A. 12.5 dynes
B. 25 dynes
C. 43. 3 dynes
D. 50 dynes

116. Two-point charges 10 cm apart exert a force of 1 x 10 raised to the (-3) grams on each
other. If the charges are the same value, what is the value of each charge in stat coulomb?

A. 8.90 stat coulomb

B. 9.90 stat coulomb
C. 6.90 stat coulomb
D. 7.90 stat coulomb

117. Two electrons in a vacuum experienced a fore of 2 X 10^-15 N. How far apart are the
electrons?

A. m
B. m
C. m
D. m

118. Two point charges of 2 C and a 5 C are 10 meters apart. A third point charge of 6 C is
placed between them. At what distance from the 5 C charge must the 6 C charge is placed, in
such way that it will stay in equilibrium?

A. 6.125 m
B. 5. 365 m
C. 6.025 m
D. 5.256 m

119. Two spheres separated form each other by 10 m have charges of 0.001 coulomb and
0.003 coulomb respectively. In between the two spheres is point of zero electric field. What is
the distance from the 0.001 coulomb sphere?

A. 6. 34 m
B. 7.78 m
C. 2.24 m
D. 3.66 m

120. Calculate the magnitude of the electric field at a point that is 30 cm from a point charge
Q= C.

A. N/C
B. N/Cµ
C. N/C
D. N/C.

121. Two metallic plates separated by 1 cm are connected across a 12 V battery. A certain
plastic material is inserted completely filling the space between the plates and the charge on
each plate observed to double. What is the dielectric constant of the plastic material?

A. 0.5
 B. 2
C. 4
D. 6

122. Calculate the capacitance between two parallel plates each of which is 100 cm^2 and 2
mm apart in air.

A. 0.443 µµF
B. 0.515 µµF
C. 0.452 µµF
D. 0.502 µµF

123. A capacitor has two parallel metal plates measuring 0.5 m squares each. The distance
between the plates is 1 cm in free air. If a dielectric material whose permittivity is 4 and 5 mm
thick is placed in the upper plate, leaving an air gap between the bottom plate and the
dielectric, what is the capacitance of the capacitor?

A. 207 µµF
B. 254 µµF
C. 193 µµF
D. 287 µµF

124. A capacitor is composed of two plates separated by a 3-mm insulation whose dielectric
constant is 4. An additional place of 6-mm insulation is inserted between the plates. What is
the dielectric constant of the additional insulation if the capacitance of the capacitor
decreases to half as much of its original value?

A. 5
B. 8
C. 6
D. 7

125. A parallel-plate capacitor has an equivalent capacitance of 850 µF. The area of each plate
is 6 cm^2 and the thickness of the dielectric is 0.02 cm. If the material used as the dielectric
has a constant of 8, how many sections are there in parallel?

A. 4
B. 5
C. 7
D. 6

126. A parallel plate capacitor is made of 350 plates, separated by paraffined paper 0.0010 cm
thick (k = 2.5). The effective size of the plate is 15 by 30 cm. What is the capacitance of this
capacitor?

A. 35 µF
B. 15 µF
C. 140 µF
D. 70 µF

127. A capacitor is charged with 0.23 watt-second of energy at a voltage of 48 volts. What is its
capacitance?

A. 180 µF
B. 240 µF
C. 200 µF
D. 220 µF
128. A 20 µF is charged by a 12-V battery. What is the stored energy in the capacitor?

A. J
B. J
C. J
D. J

129. A parallel plate capacitor with air between its plate is charged until the potential
difference V appears across it. Another capacitor having hard rubber (dielectric constant = 3)
between its plates but otherwise identical, is also charged to the same potential difference. If
the energy of the first capacitor is W, that of the second is

A. 9W
B. W/3
C. W
D. 3W

130. A capacitor whose plates is 20 cm x 3.0 cm and is separated by a 1.0-mm air gap is
connected across a 12-V battery. Determine the charge accumulated on each plate after a
long time.

A. C
B. C
C. C
D. C

131. The result of capacitance C1= 6 microfarads and c2 in series is 3 microfarads. Capacitor
C2 in microfarads is

A. 3
B. 4
C. 8
D. 6

132. The equivalent capacitance of two capacitors in series is 0.03 µF and when connected in
parallel, 0.16 µF. If the capacitor whose capacitance is double as much what will be the new
equivalent series capacitance of the combination.

A. 0.048 µF
B. 0.055 µF
C. 0.042 µF
D. 0.050 µF

133. Three capacitors of 16, 15 and 12 µF, respectively are connected in series. What is the
maximum voltage that can be supplied to the combination if the voltage drop across any of
the three capacitors must not to exceed 100 V.

A. 260 V
B. 245 V
C. 255 V
D. 250 V

134. Three capacitors of 20, 20 and 15 µF respectively are connected in series across a 100-V
supply. Find the voltage across the 10 µF capacitor.

A. 54.52 V
B. 46.15 V
 C. 38.25 V
D. 42. 38 V

135. Three condensers of 6, 20 and 15 µF are connected in series across a 200 V supply. If the
condensers are disconnected, how much energy can the charged condensers provide if
connected across each other with like polarities together?

A. 0.052 J
B. 0.060 J
C. 0.076 J
D. 0.068 J

136. Two capacitors with capacitance of 6 µF and 4 µF are connected in series across a 100 V
dc source. If the supply voltage is cut off and the two capacitors are connected in parallel,
what will be the final charge accumulated in the 4 µF capacitor?

A. 96 µC
B. 192 µC
C. 126 µC
D. 88 µC

137. A 40 µF capacitor is charged to store 0.2 J of energy. An uncharged 80 µF capacitor Is

connected in parallel with the first one through a perfectly conducting leads. What is the
energy lost due to the work done by the charges in spreading out over two capacitors?

A. 0.08 J
B. 0.12 J
C. 0.80 J
D. 0.012 J

138. Four capacitors A, B, C, and D are connected across a 150-V DC source. The charges
accumulated in A, B and C are equal to 2000, 750 and 1500 µC, respectively. If the total
capacitance of the combination is known to be 35 µF, how much charge is the accumulated in
the capacitor D?

A. 1200 µC
B. 1000 µC
C. 1150 µC
D. 1400 µC

139. A condenser of 1 microfarad capacitance is charged to 100 volts and then disconnected
from the power supply. A second but uncharged capacitor of 3 microfarad is then connected
across the first capacitor. The volts across the parallel combination is

A. 66 2/3 volts
B. 45 volts
C. 25 volts
D. 110 volts

140. Three capacitors A, B and C are charged as follows: A = 10 µF, 100 V; B=15 µF, 150 V and
C = 25 µF, 200 V. They are connected in parallel with terminals of like polarity together. What
is the voltage across the combination?

A. 150 V
B. 120 V
C. 185 V
D. 165 V
141. A 100 µF capacitor is charged from a 200-V supply. The charged capacitor is then
connected across three uncharged capacitors connected in parallel. The charges on these
capacitors after a long time become 4000, 5000 and 6000 µC. Solve the voltage across the
combination.

A. 64 V
B. 50 V
C. 76 V
D. 80 V

142. Two capacitors of 200 and 800 nF, respectively are connected in parallel. The
combination is then connected in series with another two capacitors of C and 600 nF
connected in parallel. If the total capacitance of the set up is 500 nF, determine the
capacitance C.

A. 650 nF
B. 550 nF
C. 400 nF
D. 500 nF

143. A coaxial cable has a 10-mm diameter inside conductor and a metallic sheath with an
inside diameter of 20 mm. If the insulating medium has a dielectric constant, k = 2, and a
permittivity of 1.113 10 ^-10, what is the capacitance between the conductor and the shield
per km?

A. 0.1605 µF/km
B. 0.8036 µF/km
C. 0.0803 µF/km
D. 0.0403 µF/km

144. A lead-sheath cable for underground service has a copper conductor (diameter = 0. 350
inch) surrounded by 0.20-inch wall of rubber insulation. Assuming the dielectric constant of 4.
3 for rubber, calculate the capacitance of the cable per mile length.

A. 1.01 µF/mile
B. 0.504 µF/mile
C. 0.76 µF/mile
D. 0.252 µF/mile

115.
116.

117.

118.
119.

120.

121.
122.

123.

124.
125.

126.

127.
128.

129.

130.

131.

132
133.
134.

135.
136.

137.
138.

139.

140.
141.

142.

143.
144.

Magnetic Circuits

Force on a conductor carrying a current in a magnetic field

Where: F = Force (newton)

 β = flux density (tesla)

I = current (ampere)

L = length of conductor (meter)

Note: this formula presupposes that the direction of the axis of the conductor is at right angles
to the direction of the field. If the directions of I and β form an angle of α, the expression must
be multiplied by sin α.

Force between two straight wires with a current

Where f = force (newton)

L1, l2 = currents in the two wires (ampere)

D = distance between the two wires (meter)

L = length of two wires (meter)

Magnetomotive Force of MMF

A force that sets up or tends to set up magnetic flux in a magnetic circuit. By passing an
electric current through a number of turns of a wire produces it.

Where = mmf (ampere – turn)

N = number of turns

I = current carried (ampere)

 Gilbert – cgs unit of magnetomotive force. Named after the English Physician and
physicist, Wiliam Gilbert (1540 – 1603).

Where: = mmf (gilbert)

N = number of turns

I = current carried (ampere)

Magnetic flux

Magnetic flux – number of magnetic lines of forces in a magnetic field.

  Maxwell – unit of magnetic flux equal to one line of force. Named after the Scottish
physicist, James Clark Maxwell (1831 – 1879).
 Weber – Si unit of magnetic flux equal to 10” lines or maxwells. Named after the
German physicist, Wilhelm Weber (1804 – 1891). One weber is equal to 1 x 108
maxwells.

Magnetic Flux Density

Magnetic flux density – number of lines of flux per unit area through any substance in a plane
at right angles to the lines of flux.

Where: β = flux density (tesla)

= flux (weber)

A = surface area perpendicular to the field (square meter)

 Tesla = Si unit of magnetic flux density equal to weber per square meter. Named after
the Croatian – American engineer, Nikola Tesla (1856 -1943).
 Gauss - cgs unit of magnetic flux density equal to Maxwells per square centimeter.
Named after the German mathematician Johann Karl Freidrich Gauss (1777 – 1855).

Magnetic Field Intensity or Strength

Magnetic field Intensity – mmf per unit length of the magnetic flux. It is also called as the
magnetizing force or the magnetic potential gradient.
Where H = Magnetic field intensity (ampere – turn per meter)

t = mean length of flux lines (meter)

= magnetomotive force (ampere – turn)

 Oersted – cgs unit of magnetic field strength equal to gilbert per centimeter. Named
after the Danish Physicist, H.C. Oersted (1777 – 1851)

Permeability

Permeability – The ability of a material to conduct magnetic flux through it

Where μ = permeability of the material (henry per meter)

 Relative permeability – ratio of the permeability of material to the permeability of air

or vacuum.

Where: μ0 = free space permeability (4μ x 10 -7 henry in meter)

Magnetic field of an infinitely long straight line

Where: l = current carried by the wire (ampere)

R = perpendiculat distance from the point considered to the surface of the wire
(meter)

H = magnetic field intensity or field strength (ampere – turn per meter)

β = magnetic flux density (tesla)

μa = free space permeability

μc = relative permeability of the core

Reluctance

Reluctance – property of a material that opposes flux flow. It is equal to the ratio of the
magnetomotive force in a magnetic`circuit to the magnetic flux through any cross section of
the magnetic circuit.
When: = reluctance (reciprocal henry)

l = mean length of the magnetic path (meter)

μ0 = free space permeability

= 4 π x 10-7 (SI units)

= 1 (cgs units)

μr = relative permeability of the core

A = cross sectional area of the magnetic path (square meter)

V = reluctivity

 Reluctivity – reciprocal of permeability

Permeance

Permeance – reciprocal of reluctance

Where P = permeanance

Magnetic circuit

Magnetic circuit – a closed path in which magnetic induction or flux flows

Where: = flux (weber)

= mmf (ampere – turn)

= reluctance (reciprocal henry)

Where: = flux (Maxwell)

N = number of turns in the coil

I = current flowing in the coil (ampere)

= reluctance (gilbert per Maxwell)

Reluctance in Series

Reluctance in Parallel

Ampere – Turns for an air Gap

Where: = mmf in the air gap (amperes – turn)

D = length of air gap (meter)

Β = flux density in the air gap (tesla)

μ0= free space permeability

Energy stored in a magnetic circuit

Where: Wm = energy stored (joule)

μ = permeability of core

Tractive or lifting force of a magnet

Where: F = force (newton)

β = flux density in the air gap (tesla)

A = total area of the contact between the armature and the core (m 2)

μ0 = free space permeability

Steinmetz’s Formula

According to experiments by Charles Proteus Steinmetz (1865 – 1923) the heat energy due to
hysteresis released per cycle per unit volume of iron is approximately:

Where: Wh = Heat energy due to hysteresis released per unit volume of iron (J/m2)

βm = maximum flux density (tesla)

f = frequency (hertz)

n = hysteresis coefficient

145. The force acting on a pole of 3 Wb is 12 N. The magnetic intensity of the magnetic field is

A. 4 N per Wb
B. 12 N per Wb
C. 35 N per Wb
D. None of these

146. Two straight parallel wires 2 m long and 3 mm apart carries a current of 8.0 A in opposite
direction. Calculate the force between these conductors.

A.
B.
C.
D.
147. A wire 12 cm long and carrying a current of 30 A is placed in between the pole face of a
magnet whose magnetic flux density is 0.9 tesla. If the wire is inclined at an angle 60 degrees
from the plane of the magnetic field, what is the force exerted on the wire?

A. 2.8 N
B. 2.5 N
C. 3.1 N
D. 2.2 N

148. The reluctance of a non-magnetic circuit is 12 units. How much flux will be set up if
surrounded by a coil 600 turns carrying a current of 3 A.

A. 150
B. 16.67
C. 50
D. 200

149. A coil in a magnetic contactor requires a 0.5 A provide a magnetizing force of 500 AT.
How many turns are necessary?

A. 250
B. 500
C. 1000
D. 2000

150. A solenoid 30 cm long is wound with 300 turns, what is the value of its field strength
inside the solenoid, when the coil is carrying a current of 2 amperes?

A. 1500 AT/m
B. 2000 AT/m
C. 1800 AT/m
D. None of these

151. Calculate the magnetic field intensity to produce a flux density of tesla at the
center of a long straight solenoid.

A. 7958 AT/m
B. 6423 AT/m
C. 8323 AT/m
D. 7869 AT/m

152. If a current of 5 A flows through a long wire of radius 0.004 meter, what is the flux
density (H) produced 0.02 meter away from the surface of the wire.

A. 19.70 AT/m
B. 39.80 AT/m
C. 66. 34 AT/m
D. 33.17 AT/m

153. The relative permeability of a certain silicon steel is 4500. A certain magnetic loop
consists of a silicon steel of 10 cm square, 20 cm long and an air gap of ¼ cm. What is the
reluctance of the magnetic circuit?

A.
B.
C.
D.
154. A certain laminated steel core has a permeability of 3000. The length is 5 cm and the
cross section is 2 sq cm. what is its reluctance?

A. 7500
B.
C.
D. 2.5

155. A coil with 900 turns is wound over a magnetic core with a reluctance of 10,000 AT/Wb. If
a current of 0.5 A is pass through the coil, how much is the magnetic flux that the coil
generates?

A. 0.062 Wb
B. 0.058 Wb
C. 0.032 Wb
D. 0.045 Wb

156. An air-core circular coil has 5000 turns. The inner and outer diameters are 20 and 24 cm
respectively. If a current of 2 A is passed through the coil, determine the flux density inside the
coil.

A. 0.018 T
B. 0.021 T
C. 0.013 T
D. 0.015 T

157. A given magnetic circuit has a magnetic field intensity of 400 AT/m. If the length of the
magnetic path is doubled maintaining the same magnetomotive force, how much is the new
magnetic field intensity?

A. 800 AT/m
B. 400 AT/m
C. 200 AT/M
D. 600 AT/m

158. A magnetic circuit consists of silicon steel of 3000 permeability, of 10 cm length and a
cross section of 1.5 sq. cm and an air gap of the same cross section of 1.5 sq. cm and an air gap
of the same cross section and of 2 cm length. A ½ ampere current flow through the 5000-turn
coil. What is the field intensity at the air gap?

A. 250 oersted
B. 795 oersted
C. 2262 oersted
D. 1567 oersted

Problem 159: EE Board March 1998

A magnetomotive force is supplied by a current of one ampere through 100 turns. The
magnetic circuit consists of a steel core of 1000 permeability, 10 cm long and 4 sq. cm area
and an air gap one cm long. What is the field intensity at the air gap

A. 12.25 oersted
B. 497.6 oersted
C. 100.53 oersted
D. 124.4 oersted

Problem 160:
 A circular ring of iron having a cross sectional area of 5 cm 2, an average diameter of 30
cm is wound with a coil of 1000 turns. If a current of 3 A is pass through the coil, determine
the flux generated? Assume the relative permittivity of iron is 250

A. 5 x 10-4 Wb
B. 6 x 10-4 Wb
C. 6.5 x 10-4 Wb
D. 4.75 x 10-4 Wb

Problem 161:

A non – magnetic ring having a cross sectional area of 10 cm2 is uniformly wound with
300 turns of a given wire. If a current of 1 A is passed through the coil, 2.4 μWb of flux is
generated inside the ring. Determine the average diameter of the ring.

A. 50 cm
B. 42 cm
C. 48 cm
D. 54 cm

Problem 162:

A coil with 150 turns is wound over a 200 cm a cylindrical iron core whose relative
permittivity is 250. If a current of 2 A is pass through the coil. Determine the flux density in the
core.

A. 0.04 T
B. 0.07 T
C. 0.12 T
D. 0.10 T

Problem 163: EE Board March 1998

A magnetic circuit consists of silicon steel of 3000 permeability and an air gap. The
length of the steel core is 10 cm and the air gap is 2 cm. Both have the same cross section of
1.5 sq. cm. A current of ½ ampere flows through the windings to produce 2351 maxwells flux.
How many turns are there in the coil?

A. 4120 turns
B. 5000 turns
C. 2500 turns
D. 1250 turns

Problem 164:

A toroidal core with a mean circumference of 100 cm and a cross sectional area of 10
2
cm is wound with 500 turns of wire. What current would be required to generate a flux of 1
mWb in the core? Assume the core has a relative permeability of 800.

A. 1.0 A
B. 2.0 A
C. 1.5 A
 D. 2.5 A

Problem 165:

A magnetic ring (Relative Permittivity = 800) has a mean radius of 10 cm and a cross
sectional area of 5 cm2. An air gap measuring 1.5 mm is cut in the ring. Determine the required
mmf in order to produce a flux of 0.25 mWb in the air gap.

A. 890
B. 920
C. 909
D. 972

Problem 166:

A magnetic ring with a mean diameter of 25 cm and a cross sectional area of 5 cm2 is
wound with a coil of 600 turns. An air gap if 4 mm is made by cutting a section of the ring. A
current of 10 A is passed through the coil. Determine the energy stored in the air gap. Assume
relative permittivity of the ring to be 1000.

A. 2.08 J
B. 1.96 J
C. 1.57 J
D. 1.66 J

Problem 167: EE Board April 1998

A permanent magnet loudspeaker is equipped with a 10 ohm 10 turn voice coil wound
on a tube 1 inch in diameter. The flux density in the air gap is 10,000 lines per square inch. If
the impedance of the voice coil is a pure resistance, what will be the maximum thrust
delivered to the core if the impressed signal is 20 dB above 0.005 watt?

A. 0.0336 N
B. 0.0116 N
C. 0.0276 N
D. 0.0532 N

Problem 168: EE Board October 1997

A small single – phase transformer has 10.2 watts at no load. The core has a volume of
750 cubic cm. The maximum flux density is 10,000 gauss and the hysteresis constant of the
core is 5 x 10-4. Using the Sterinmetz law to find the hysteresis, determine the eddy current
loss

A. 4.55 W
B. 5.55 W
C. 3.55 W
D. 2.55 W

SOLUTIONS:

145.
146.

147.

148.

149.

150.

151.
152

153.

154.

155.

156.
157.

158.

159.
160.

161.
162

163.

164.
165.

166.
167.
168.

Electromagnetic Induction

Faraday’s Law

 Faraday’s first law of electromagnetic induction: Whenever the flux linking a coil or
current changes, an emf is induced in it.
 Faraday’s second law of electromagnetic induction: The magniturde of the induced
emf is proportional to the rate of change of flux linkage.
Where: e = induced emf (volt)

N = number of turns

d/dt = rate of change of flux (weber per second)

Induced EMF in a short length of wire

A voltage can be developed in a wire by moving the wire across a magnetic field so that flux
cutting results (Faraday’s principle)

Where e = induced emf (volt)

= flux cut by the conductor (weber)

T = time of flux cutting (second)

β = flux density at the location of the conductor (tesla)

L = length of the conductor (meter)

V = relative velocity (meter per second

Self Inductance or coefficient of self induction

It is a measure of how much counter emf is generated in a circuit or component for a change
in current through that circuit or component.

 Inductor or choke coil – a two terminal device that consist of a coiled wire wound in
common core or in free air.
 Henry (H) – unit of inductance. Named after the American physicist, Joseph Henry
(1791 - 1878)

Where e = self- induced voltage (volt)

L = self inductance (henry)

Di/dt = rate of change of current (ampere per second)

Where l = inductance (henry)

μ0 = permeability of free space

A = cross sectional area of the magnetic path (square meter)

N = number of turns

= Flux (weber)

I = current (ampere)

= mean length of the magnetic path (meter)

= reluctance of the magnetic path (reciprocal henry)

= flux linkage (weber)

 Inductance with varying reluctance

Where d/dt = rate of change in flux (Webbers per second)

Di/dt = rate of change in current (ampere per second)

 Inductance of coaxial cable

Where L = inductance (henry per meter)

= diameter of the outer conductor

 = diameter of the inner conductor

 Inductance of two long cylindrical conductors, parallel and external to each other

Where L = inductance (henry)

D = distance between the two wires (meter)

F1, f2 = radius of the two wires respectively (meter)

Series - connected inductors

Parallel – connected inductors

Note: For the series – parallel and parallel – series connections, use the basic principles in
series and parallel connections to simplify the circuit and answer the question.

Mutual Induction

It is the condition of inducing an emf in a coil or conductor by magnetic flux lines generalized
in another coil or conductors

 Mutual inductance – the amount or degree of mutual induction that exists between
two coils or windings
Note: Two coils have a mutual inductance of 1 H when a current change of 1 a/s in one coil
induces 1 V in the other coil

Where M = Mutual inductance (henry)

L1= self inductance of coil 1 (henry)

L2 = self inductance of coil 2 (henry)

K = coefficient of coupling

μ0 = permeability of free space (4 π x 10-7 henry per meter)

μr = relative permeability of the core used

A = cross sectional area of the magnetic path (square meter)

N1 = number of turns in the primary winding

N2 = number of turns in the secondary winding

= mean length of the magnetic path (meter)

= reluctance of the magnetic path (reciprocal henry)

Series Coils with mutual Reluctance

Series siding – the common current produces the same direction of magnetic fields

Series opposing – connections result in opposite fields

Where: l = total inductance, series aiding (henry)

L = total inductance, series opposing (herny)

M = mutual inductance between the two coils (henry)

Parallel coils with mutual inductance

Parallel aiding

Parallel opposing

Energy stored in and inductor carrying a current

Where W = energy stored (joule)

L = inductance of the coil (henry)

I = current flowing in the coil (ampere)

Problem 169:
 A magnetic coil produces 100,000 maxwells with 2,000 turns and with a current of 2 A.
The current is cut – off and the flux collapses in 0.01 sec. What is the average voltage that will
appear across the coil?

A. 20 kV
B. 200 V
C. 2,000 kV
D. 2 kV

Problem 170: EE Board October 1998

A magnet, which generates 800 maxwells of flux, is inserted through a coil of 1000
turns. It is then withdrawn within 0.15 sec. What is the voltage that appears across the coil?

A. 0.22 V
B. 53.3 V
C. 533 V
D. 0.0533 V

Problem 171:

The armature coil of a generator with 50 conductors on it rotates in a magnetic field

with a magnetic flux density 1.5 T. The effective area of the coil is 1000 square cm. If this coil is
move across the pole in 0.5 sec, determine the average emf induced in the coil

A. 20 V
B. 15 V
C. 10 V
D. 12 V

Problem 172: EE Board April 1997

A conductor, 50 mm long, moves at a velocity of 2.5 meters per second across a

magnetic field of 0.90 Wb/m2. What is the voltage generated?

A. 0.125 V
B. 0 .0648 V
C. 0.1125 V
D. 0.072 V

Problem 173:

An airplane travels at a speed of 1000 kph in a region where the earth’s magnetic field
is 5.0 x 10-5 and is nearly vertical. What is the potential difference induced between the
wing tips of the airplane, which is 20 m apart?

A. 0.28 V
B. 0.23 V
C. 0.36 V
D. 0.15 V

Problem 174: EE Board October 1998

A piece of conductor 10 cm long moves across a magnetic field of 10,000 gauss at a

velocity of 120 cm/sec. What voltage appears across the conductor?
 A. 0.24 V
B. 0.12 V
C. 60 V
D. 120 V

Problem 175:

A conductor 50 cm in length moves at an angle of 30 ° to the direction of a magnetic

field with a velocity of 100 cm/s. If the field has a flux density of 2 Wb/m2, calculate the emf
induced in it.

A. 0.5 V
B. 2.0 V
C. 1.0 V
D. 1.5 V

Problem 176:

A metal disk of 30 cm radius rotates at an angular velocity of 1200 rpm across a

uniform vertical magnetic field of flux density 0.5 Wb/m 2, Calculate the voltage induced
between the rim of the center of the disk.

A. 4.7 V
B. 5.8 V
C. 5.1 V
D. 4.4 V

Problem 177:

A conducting disc 20-cm in diameter pivoted by a vertical spindle which is lying in

uniform vertical magnetic field of flux density 0.3 T. A fixed brush is connected at the edge of
the disc. When a 4 Ω resistance is connected across the brush and the spindle, a current of 15
mA was observed to flow through the resistor. Determine the velocity in which the disc is
rotating.

A. 394 rpm
B. 382 rpm
C. 302 rpm
D. 228 rpm

Problem 178:

How much is the inductance of a coil that induces 500 V when the current changes at
the rate of 5 mA in 2 μs?

A. 12.5 μH
B. 0.2 H
C. 0.1 H
D. 2 mH
Problem 179:

The field winding of a DC generator is wound with 900 turns and has a resistance of 50
ohms. If the winding is excited from a 240 V dc source, the magnetic flux linking the coil is 4
mWb. Determine the self – inductance of the coil.

A. 0.75 H
B. 0.83 H
C. 0.92 H
D. 0.56 H

Problem 180:

A coil of 1000 turns is uniformly wound on a ring of non – magnetic material, the
mean diameter being 20 cm. The cross sectional area of the coil is 4 square cm. Determine the
self – inductance of the coil.

A. 0.7 mH
B. 0.9 mH
C. 0.6 mH
D. 0.8 mH

Problem 181:

An iron core 0.4 m long and 5 square cm in cross section is wound with 300 turns.
When a current of 0.5 A flows in the coil, how much is the inductance of the coil. Assume the
core has a permeability of 2500.

A. 0.45 H
B. 0.42 H
C. 0.26 H
D. 0.31 H

Problem 182: EE Board October 1990

What is the coefficient of coupling of two coils whose mutual inductance is 1 H and
whose self inductance are 1.2 and 2 H?

A. 1.549
B. 2.400
C. 0.645
D. 0.912

Problem 183:

A coil of inductance 8 mH, produces 80 μWb of magnetic flys. Of this total flux, 60
μWb are linked to a second coil of inductance 2 mH, how much is the mutual inductance
between coils?

A. 3 mH
B. 4 mH
 C. 5 mH
D. 2 mH

Problem 184: EE Board April 1992

The total inductance of two coils, A and B when connected in series aiding is 0.5 H and
0.2 H when connected in series opposing. Coil A when isolated from coil B has a self –
inductance of 0.2 H. Calculate the self – inductance of coil B.

A. 0.16 H
B. 0.12 H
C. 0.20 H
D. 0.15 H

Problem 185:

Two identical coils with self – inductance of 250 μH each are connected in series.
When connected series aiding, the equivalent inductance is 550 μH and 450 μH when
connected series opposing. How much is the coupling coefficient of two coils?

A. 0.2
B. 0.3
C. 0.1
D. 0.4

Problem 186:

A cylinder whose radius is 2 cm and altitude of 100 cm, is uniformly wound with 2500
turns of wires in a single layer. A second layer of 100 turns and of much finer wires is wound
ov er the first near its center. Calculate the mutual inductance of the two coils.

A. 0.40 mH
B. 0.38 mH
C. 0.52 mH
D. 0.63 mH

Problem 187:

Two coils having 200 and 300 turns respectively are wound side by side on a common
closed core whose cross section is 100 cm2 and mean length of 200 cm. What will be the
voltage induced in the second coil if the current in the first coil changes from 0 to 5 A in 0.05
seconds. Assume relative permittivity of the core to be 1500.

A. 52.3 V
B. 67.8 V
C. 62.6 V
D. 58.6 V

Problem 188: EE Board October 1996

The energy (Wo) stored in a coil is dependent in the inductance (L) of the coil and the
current flowing. If the inductance were doubled with the same current flowing, what would be
the resulting stored energy?

A. 2.0 Wo
B. 0.5 Wo
 C. 1.0 Wo
D. 4.0 Wo

Problem 189: EE Board October 1990

A 6.0 H coil whose resistance is 12 ohms is connected in series with a 24 ohms resistor
and to a 144 V battery and a switch. The switch is closed at 1 = 0. Determine the energy
stored in the magnetic field at a steady state

A. 50 J
B. 48 J
C. 52 J
D. 46 J

Problem 190:

Two coils having self – inductance and mutual inductance of 3H, 2H, and 1H
respectively are connected in series. If a current of 4 A is passed through the coil, evaluate the
ratio of the energy stored in the magnetic field when the fluxes (self and mutual) are in the
same direction to the energy stored when the said fluxes are against each other.

A. 3.24
B. 2.33
C. 1.71
D. 2.67

Problem 191: EE Board April 1995

Two coils of inductances 4 and 6 henry are connected in parallel. If their mutual
inductance is 3 henry, calculate the equivalent inductance of the combination if mutual
inductance assists and if mutual inductance opposes the self-inductance respectively

E. 2.4 H & 1.4 H

F. 3.75 H & 0.94 H
G. 6.25 H & 2.75 H
H. 16 H & 4 H

Problem 192

A 50 – mH inductor is charged to store 1 J of energy. If an uncharged 30 – mH inductor

is then connected across its terminals, how much energy is transferred to the second inductor.

A. 0.154 J
B. 0.262 J
C. 0,234 J
D. 0.141 J

Problem 193

A solenoid 500 cm long and 10 cm in diameter is wound with 1500 turns. Fined the
energy stored in the magnetic field when a current of 5 A flows.

A. 0.45 J
B. 0.55 J
C. 0.46 J
D. 0.72 J
Problem 194

A coil of 250 turns is wound on a closed iron ring whose cross sectional area is 20 cm 2
and mean length of 100 cm. Determine the energy stored in the magnetic field if a
current of 2 A is passed through it. Assume the permeability of iron is 900
A. 2.83 J
B. 3.12 J
C. 2.03 J
D. 1.88 J

SOLUTIONS:

169.

170.

171.

172.

173.
174.

175.

176.

177.
178.

179.

180.
181.

182.

183.

184.
185.

186.

187.
188.

189.

190.
191.

192.

193.
194.
 1-Phase AC Circuits: Part 1

THE SINUSOIDAL WAVE

 Frequency (f)- the number of cycles produce per second or Hertz (Hz). Named after
the german physicist Heinrich Rudolf Hertz (1886-1888)
 Period (T)- time needed in seconds to produce one cycle
 Wavelength- length of one complete cycle

 Alternation- equal to one half of a cycle

 Instantaneous value- magnitude of the wave at any instant of time or angle or rotation
 RMS (root-mean square)- the r.m.s value of a sinusoidal wave is that which when
applied to a given time, produces the same expenditure of energy when DC is applied
to the same circuit for the same interval of time.

 Average value of the sinusoidal wave- the mean of all the instantaneous values of one-
half cycle.

 Form factor- ratio of rms value to the average value of an alternating quantity.
 Peak factor- ratio of maximum value to the rms value of an alternating quantity.

SUM OF TWO ALTERNATING WAVES

SUM OF MORE THAN TWO OUT OF PHASE ALTERNATING WAVES

REACTANCE AND IMPEDANCE

 Reactance- property of an inductor or capacitor to oppose current low in a given

circuit.
  Impedance (Z)- the joint effect of combining resistance and reactance in an AC circuit.

BEHAVIORD OF R, I, AND C IN AC CIRCUITS

 Resistor- takes a current that is in phase with the voltage across it

 Ideal inductor- takes a current that lags the voltage across it by 90 electrical degrees
 Ideal capacitor- takes a current that leads the voltage across it by 90 electrical degrees

COMPLEX IMPEDANCE EQUIVALENTS OF R, I, AND C

ACTIVE, REACTIVE AND APPARENT POWERS

POWER FACTOR

It is defined as the ratio of true power and apparent power.

TYPES OF POWER FACTOR

 Unity pf- the voltage and current are in phase

 Lagging pf- the current lags the voltage by an acute angle.
 Leading pf- the current leads the voltage by an acute angle
 Zero pf- if the voltage and the current are out of phase by exactly 90 degrees

Where: pf=power factor (unitless)

Problem 195: EE board October 1996

What is the wavelength of a carrier wave with a frequency of 100 megahertz?

A. 3.0 m
B. 7.5 m
C. 1.5 m
D. 6.0 m

Problem 196: EE board October 1997

A chart speed of a recording instrument is 25 mm/sec. One cycle of the signal being
recorded extends over 5 mm. What is the frequency of the signal?

A. 20 cps
B. 2 cps
C. 50 cps
D. 5 cps

Problem 197: EE board April1990

A 240 – V, 25 Hz sinusoidal generator is connected to a 20 ohms resistor. Determine

the instantaneous current when elapsed time is 0.01 second.

A. 15.43 A
B. 16.30 A
C. 16.97 A
D. 12.00 A

Problem 198: EE board April 1997

What A wire carries a current, I – 3 cos 314t amperes. What is the average current
over 6 seconds?

A. 0A
B. 1.5 A
C. 3.0 A
D. 0.523 A

Problem 199

Two current sources deliver current to a common load. The first source delivers a
current whose equation is 25 sin 100xt amperes while the second delivers a current whose
equation is 15 cos 100xt amperes. What is the rms value of the current load?
 A. 29.15 A C. 20.6 A
B. 40 A D. 10 A

Problem 200

Two alternators A and B delivers 100 and 150 A, respectively to a load, if these
currents are out of phase by 30 electrical degrees, determine the total current drawn by the
load.

A. 201.5 A
B. 250.0 A
C. 215.4 A
D. 241.8 A

SOLUTIONS:

195.

196.

197.

198.
199.

200. Two alternators A and B delivers 100 and 150 A, respectively to a load. If these currents
are out of phase by 30 electrical degrees, determine the total current drawn by the load.

A. 201.5 A
B. 250.0 A
C. 215.4 A
D. 241.8 A

201. three loads, unit A,B, and C are connected in parallel and take currents that are
respectively 12, 10 and 15 A respectively. Assuming Ia to be reference phasor. Ib leads Ia by
30 and Ic lags behind Ia by 65, calculate the total (resultant) current.

A. 28.33 A
B. 30.21 A
C. 26.46 A
D. 32.10 A

202. An industrial coil has a resistance of 32 ohms and a reactance of 24 ohms and rated 440
volts at 60 Hz. A factory will connect the coil to a 440 V, 50 Hz supply. Solve for the value of a
series resistor needed to avoid overcurrent condition.

A. 2.07 Ω
B. 2.64 Ω
C. 2.44 Ω
D. 2.25 Ω

203. Across a 230 V, 60 Hz powers supply is a 15 Ω non-inductive resistor. What is the

equation of the resulting current?

A. 21.68 sin 377t

B. 26.55 sin 377t
C. 15.33 sin 377t
D. 28.16 sin 377t

204. Two relays each with 20 Ω resistance and 0.16 henry inductance are connected in series.
What is the equivalent impedance?

A. 20+j102.2 Ω
B. 20+j95.32 Ω
C. 40+j120.63 Ω
D. 40+j25.32 Ω

205. An inductive coil takes a current of 2 A and consumes 160 W when connected to a 240 V
AC supply. A second coil when connected across the same supply takes 3 A and 500 W. Find
the total power when the two coils are connected in series to this supply.

A. 144.56 W
B. 134.31 W
C. 150.22 W
D.128.35 W

206. A ½ hp, 110 V, 60 Hz, single phase induction motor has an efficiency of 88% and a power
factor of 0.707 lagging at rated load. This motor is to be connected temporarily on a 220 V, 60
Hz line. Determine the resistance required to be placed in series with the motor in order to
prevent the machine from experiencing overcurrent?

A. 25.2 Ω
B. 23.5 Ω
C. 19.5 Ω
D.27.6 Ω

207. Two coils A and B known to have the same resistance are connected in series across a
110 V, 60 cycle line. The current and power delivered by the source are respectively 4.1 A and
300 W. If the voltage across coil A is twice that across coil B, calculate the inductance of coil B.

A. 8.63 mH
B. 7.36 mH
C. 9.02 mH
D. 4.49 mH

208. A coil draws 1875 W when connected to a 150 V DC source. It consumes 3072 W when
used on 240 V, 60 Hz AC source. Find the inductance of the coil.

A. 0.0255 H
B. 0.0341 H
C. 0.0153 H
D. 0.0240 H
209. A current of 10 A and a power factor of 0.8 lagging is taken from a single phase 250 V
supply. The reactive power of the system is

A. 1500
B. 2000
C. 2500
D. None of these

210. A resistor of 6 Ω and an unknown impedance coil in series draw 12 A from a 120-V, 60-Hz
line. If the real power taken from the line is 1152 watts, what is the coil inductance?

A. 15.9 mH
B. 10.0 mH
C. 20.0 mH
D. 1.59 mH

211. Determine the power angle in the series circuit which consist of R = 25 Ω, L = 0.2 H across
a power supply of 200 V, 30 Hz?

A. 36.4
B. 52.4
C. 46.4
D. 56.4

212. When a 30 V DC source is applied to a given coil, the coil draws 150 W. When 230 V AC is
applied to the same coil, it draws 3174 W. Determine the operating power factor of the coil.

A. 0.7
B. 0.6
C. 0.9
D. 0.8

213. The impedance coil absorbs 250 W when connected across 220 V, 60 Hz mains. It is then
connected across 110 V, 25 Hz mains and also absorbs 250 W. What is the inductance of the
coil?

A. 0.125 H
B. 0.149 H
C. 0.154 H
D. 0.163 H

214. An impedance coil takes 10 A and absorbs 250 W when connected across 220 V, 60 Hz
source. What power will it absorb when connected across 110 V, 25 Hz mains?

A. 539 W
B. 239 W
C. 439 W
D. 339 W

215. An industrial coil has a resistance of 32 Ω and a reactance of 24 Ω and rates 440 V at 60
Hz. A factory will connect the coil to a 440 V, 50 Hz supply. How much percentage overcurrent
will the coil suffer?

A. 5%
B. 10%
C. 6%
D. 8%

216. The open circuit voltage across the output terminals of an AC power supply is 15.2 V.
When these terminals are short circuited, a current of 33.2 A flows. When a 5Ω resistance is
placed across these terminals, the current through it is 1.8 A. Calculate the series internal
resistance of the power supply.

A. 2.374 Ω
B. 2.240 Ω
C. 2.125 Ω
D. 2.045 Ω

217. A single phase load takes 55 KW at 70% pf lagging from a 240 V, 50 Hz supply. If the
supply is made 60 Hz, with the voltage remaining the same, what will be the kW load at 60 Hz.

A. 42 kW
B. 48 kW
C. 40 kW
D. 45 kW

218. A 25 Ω resistor connected in series with a coil of 50 Ω resistance and 150 mH inductance.
What is the power factor of the circuit?

A. 85%
B. 80%
C. 90%
D. 75%

219. The ohmic resistance of a large magnetic contractor is measured to be 20 Ω. A 230 V is

impressed on the contractor and the current is taken as 3.2 A. Neglecting core loss, determine
the inductance of the contractor in mH.

A. 261
B. 315
C. 183
D. 251

220. An 8 Ω resistor is connected in series with an inductive coil and the combination is
connected across a 120 V, 60 Hz source. A voltmeter connected across the resistor reads 32 V
and 104 V only when connected across the coil. Determine the resistance of the coil.

A. 8 Ω
B. 9 Ω
C. 12 Ω
D. 10 Ω

221. When connected to a 220-V, 50 Hz supply, an impedance coil circuit takes 5 A, but this
current falls to 4.4 A when a 10 Ω resistor is added in series. Find the inductance of the coil.

A. 0.20 H
B. 0.15 H
C. 0.23 H
D. 0.12 H
222. An impedance coil, in series with a resistor takes a current of 5A when connected to a
100-V AC SOURCE. Using a voltmeter, the voltage across the coil was found out equal to 80 V
and that across the resistor is equal to 30 V. Find the operating power factor of the coil.

A. 0.56
B. 0.83
C. 0.73
D. 0.62

223. A load of 20+j35 Ω is connected across a 220 V source. Determine the power factor and
the VARS.

A. 49.6%, 1042 VARS

B. 85.3%, 975 VARS
C.52.2%, 1023 VARS
D. 42.3%, 1087 VARS

224. A load is rated at 115 V, 60 Hz, 10 A, and 1150 W. A coil is to be wound with a ratio of Xl
to R of 5, such that when connected in series with the load on a 230-V, 60 Hz line, the load
may operate normally. Solve for R.

A. 2.450 Ω
B. 3.489 Ω
C. 2.215 Ω
D. 3.826 Ω

225. Find the total impedance in rectangular for the following three series impedances:
12∠10, 25∠15, 34∠26

A. 66.52 + j23.46
B. 68.34 + j20.54
C. 74.31 + j21.56
D. 67.70 + j22.04

226. An impedance draws a current I = 10cos(wt-30) from a voltage, v=220sin(wt+30), what is

the impedance?

A. 15.6 - j15.5
B.15.6 + j15.6
C. 74.31 - j11.1
D. 11.0 + j19.1

227. A series resistance capacitance (R-C) circuit is connected to a 230 V 60 cycle source. If the
power taken by the circuit is 4,800 watts and the voltage drop across the resistor is 115 V,
calculate the capacitance of the capacitor.

A. 540 µF
B. 530 µF
C. 556 µF
D. 503 µF

228. A 50 and 100 µF capacitor are connected in series across a 100sin(wt+30) voltage. Write
the equation of the current.

A. 1.26sin(wt+120)
B. 1.26sin(wt +90)
C. 5.65sin(wt+120)
D. 5.56sin(wt+90)

229. A series circuit composed of 100 Ω resistor and a 20-µF capacitor connected across a 240-
V, 60 Hz line. Which of the following answer is wrong?

A. The impedance of the circuit is 67 Ω

B. Angle between the current and the voltage vectors is 53.1 degrees
C. The resulting current is 0.723 A
D. The voltage across the resistance is 144.6 V

230. A capacitance is connected to a 115-V, 25-Hz mains and takes 5 A. What current will it
take when the capacitance and the frequency are both doubled?

A. 2.5 A
B. 5 A
C. 20 A
D. 10 A

231. An ideal inductor of 50 mH is connected in series with a 175-µF capacitor. The

combination is then connected across a 120-V variable frequency AC source. At what
frequency will this circuit take a leading current of 5 A?

A. 25 Hz
B. 30 Hz
C. 28 Hz
D. 22 Hz

232. A series circuit consisting of variable resistor in series with a capacitance of 80 µF is

connected across a 120-V, 50-Hz supply. To what value should R is adjusted so that the power
absorbed by the series circuit will be 100 W?

A. 20 Ω
B. 18 Ω
C. 15 Ω
D. 12 Ω

233. A capacitor is rated 100 KVAR, 360 V, 50 Hz. What will its rating be at 60 Hz, 220 V?

A. 50 KVAR
B. 40 KVAR
C. 90.9 KVAR
D. 57.7 KVAR

234. A resistor and a capacitor are connected in series across a supply of 250 V. When the
supply frequency is 500 Hz the current in the circuit is 5 A. When the supply frequency is 60
Hz, the current is 5.8 A. Find the value of the capacitance.

A. 58.3 µF
B. 60.2 µF
C. 69.1 µF
D. 70.2 µF

235. A series circuit composed of a 0.2 H inductor and a 74-µF capacitor is connected to a 60 V
variable frequency source. At what frequency is the current be 4 A with a lagging power
factor?
A. 50 Hz
B. 51 Hz
C. 48 Hz
D. 49 Hz

236. A single phase lagging power factor load takes 300 W and 5 A at 120 V. Find the
reactance of a pure capacitor that maybe placed in series with this load so that it will operate
normally from a 240-V source.

A. 662.32 Ω
B. 67.25 Ω
C. 68.15 Ω
D. 64.48 Ω

237. A coil (RL) is connected in series with a capacitor across a 220 V, 60 Hz AC supply. The
circuit is designed such that the voltage across the coil and the capacitor are numerically
equal. If this circuit operates at 0.87 leading pf, determine the magnitude of this voltage.

A. 212 V
B. 228 V
C. 205 V
D. 223 V

238. A series circuit connected across a 100-V AC source consists of a 10-Ω resistor, a 5-Ω
capacitor, a resistance R that takes 50 W and a reactance X taking 100 inductive VARS.
Determine the minimum value of current required satisfying the above conditions.

A. 1.20 A
B. 0.92 A
C. 1.04 A
D. 1.13 A

239. The maximum instantaneous voltage and current outputs of an alternator are 300 V and
20 A, respectively. What is the power output in watts if the voltage leads the current by 30?

A. 2598
B. 6000
C. 5196
D. 3000

240. A 50-µF is connected in series with a coil having 50 Ωb resistance and a 150-mH
inductance. The source voltage is 100sin(wt-30) V. What is the maximum power?

A. 199 W
B. 147 W
C. 212 W
D. 165 W

241. An impedance draws a current i=10cos(wt-30) from a voltage v=220sin wt. What is the
maximum power?

A. 2200 W
B. 1100 W
C. 190.5 W
D. 1320 W

242. An incandescent lamp load generally considered to be made up of resistors take 4.8 kW
from a 120-V AC source. The instantaneous maximum value of power is

A. 4800 W
B. 2400 W
C. 480 W
D. 9600 W

1-phase AC Circuits: Part 2

PARALLEL AC CIRCUITS

Where: E= supply voltage

, , = impedances of the first, second and third branch respectively
, , = current drawn by the parallel combination

Notes:
1. All operations (add, substract, multiply and divide) must be done under the rules of complex
mathematical operations.
2. For combinational circuits ( series-parallel and parallel-series), the basic principles in series
and parallel circuits will be used in analyzing these circuits.

243. A circuit consists of Xa=j5 Ω, Xc=-j5 Ω and R=5 Ω all are connected in parallel. Find the
equivalent impedance.

A. 5.5 Ω
B. 5.0 Ω
C. 4.8 Ω
D. 5.2 Ω

244. Given: Z1=-j2.5 Ω ; Z2=j4 Ω ; Z3=5 Ω ; Z4=1+j5 Ω. If the four impedances are connected in
parallel, find the equivalent impedance in ohms.

A. 4.1+j0.72
B. 4.3+j0.45
C. 4.2+j0.35
D. 4.0+j0.97
245. Three impedances Za =3+j4 Ω, Zc =4-j4 Ω and Zr =0+j3 Ω are connected in parallel. Solve
for the pf of the combination.

A. 0.653 leading
B. 0.554 lagging
C. 0.503 leading
D. 0.620 lagging

246. A pure capacitance of 530.515 x H are connected in parallel across an AC power

source. Solve for their resultant impedance assuming that the frequency is 30 Hz.

A. 10 Ω
B. Infinite
C. Zero
D. Undefined

247. A coil of a 50-Ω resistance and of 150 mH inductance is connected in parallel with a 50 µF
capacitor. What is the power factor of the circuit?

A. 80%
B. 50%
C. 70%
D. 60%

248. Three impedances Za, Zc, Zr are connected in parallel. If at 60 Hz, Za=0+J8 Ω, Zc=0-j2 Ω
and Zr=5+j0 Ω. Solve for the resultant power factor.

A. 0.471 lagging
B. 0.471 leading
C. 0.573 lagging
D. 0.573 leading

249. A resistor of 50 Ω and an impedance of 100+j50 Ω are connected in parallel across a 220
V supply. What is the power factor of the load?

A. 96%
B. 99%
C. 98%
D. 95%
250. A capacitor, an electric resistance heater, and an impedance are connected in parallel to
a 120 V, 60 Hz system. The capacitor draws 50 VAR, the heater draws 100 W and the
impedance coil draws 269 VA at a pf of 0.74 lagging. Determine the system power factor.

A. 0.933 lagging
B. 0.928 lagging
C. 0.916 lagging
D. 0.911 lagging

251. A given load takes 40 KVA at 50% lagging power factor, while another load connected in
parallel across the same source takes 80 KVA at 86.7% lagging power factor. Find the apparent
power.

A. 114.5 KVA
B. 117.2 KVA
C. 116.4 KVA
D. 115.3 KVA
252. A 440-V, 60 Hz generator supplies two parallel connected loads A and B. Load A draws an
apparent power of 100 KVA at 0.80 pf lagging and load B draws an apparent power of 70 KVA
at unity pf. Determine the KVAR supplied by the generator.

A. 109.5 KVAR
B. 120.2 KVAR
C. 104.3 KVAR
D. 115.7 KVAR

253. Two single-phase motors are connected in parallel across a 120-V, 60-cycle source of
supply. Motor a split-phase induction type and motor B is a capacitor type:

Motor HP output Efficiency Pf

A ¼ 0.60 0.7 lag
B 1/2 0.700 0.95 lag

Determine the power factor.

A. 0.886 lag
B. 0.864 lag
C. 0.817 lag
D. 0.825 lag

254. A 250-Kva, 0.5 lagging power factor load is connected in parallel to a 1180-W, 0.8 leading
power factor load and to a 300-VA, 100 VAR inductive load. Determine the total apparent
power in kVA.

A. 628
B. 548
C. 615
D. 704

255. A 250 V, 30 Hz generator supplies power to a parallel circuit consisting of a 20 hp motor

whose efficiency is 90% at 0.80 pf lagging and a second load that draws apparent power of
7kVA at unity pf. Determine the system power factor.

A. 0.828 lagging
B. 0.831 lagging
C. 0.802 lagging
D. 0.884 lagging

256. A resistance of 5 Ω is connected in series with a capacitor of 442.1 µF. The combination is
then connected in parallel with an inductance of 21.22 mH. Solve for the resultant current if
the circuit is connected across a 120 V, 60 Hz AC source.

A. 9.44 A
B. 10.68 A
C. 11.29 A
D. 10.34 A

257. Two impedances Z1=3+j4 Ω and Z2=5-j8.66 Ω respectively are connected in parallel. If the
combination is connected across a 240 V AC source. How much is the total current?

A. 44.4 A
B. 42.1 A
C. 40.6 A
D. 39.9 A

258. A coil having a resistance of 30 Ω and an inductance L is connected in parallel with a

resistor having a resistance of 100-Ω. The combination is connected across a 100-V, 60 Hz
source. If the power delivered by the source is 400 W, find the value of L.

A. 0.204 H
B. 0.011 H
C. 0.026 H
D. 0.107 H

259. An inductor L1 is connected in series with a parallel combination of inductor L2 and the
capacitor C. The impedance of the circuit w=400 ra/sec is j100 Ω. The circuit is to yield infinite
impedance at w=1000 rad/sec and zero impedance at w=2000 rad/sec. Determine the value of
C.

A. 1.26 µF
B. 1.67 µF
C. 2.06 µF
D. 1.32 µF

260. A resistor and an inductor are connected in parallel across a 120-V, 60 Hz source. If the
total current and power are respectively 5 A and 1600 W, solve for the inductance of the
inductor.

A. 50.2 mH
B. 48.3 mH
C. 43.2 mH
D. 46.3 mH

261. An inductive coil wiTh a resistance R and inductive L is connected in parallel with a 30-Ω
resistor. The combination is then connected across a 60 Hz AC source. If the currents in the
coil, resistor and the total are 6,4, and 8 A, respectively, determine the inductance L of the
coil.

A. 51.36 mH
B. 48.32 mH
C. 60.35 mH
D. 53.62 mH

262. A sinusoidal current source, 10 cos 1000t, is in parallel both with a 20-Ω resistor and the
series combination of a 10-mH inductor. Find the equation of the voltage across the 10-Ω
resistor.

A. 63.25 cos(1000t-18.43)
B. 61.32 cos(1000t-20.34)
C. 56.36 cos(1000t-17.45)
D. 60.12 cos(1000t-19.38)

263. A 1-hp, 220 V, 60 Hz capacitor-start motor has main and auxiliary winding impedance at
starting of 3.5+j2.5 Ω, respectively. Determine the value of the starting capacitance that will
place the main and auxiliary winding currents 90 apart at starting.

A. 186.75 µF
B. 174.35 µF
C. 182.43 µF
D. 170.67 µF

264. Two impedance A and B are connected in parallel across a 120 V AC supply. The total
current and the current in each impedance are adjusted to 20 A. The power drawn by A is
doubled that of B and the power factor is lagging. Determine power factor of A.

A. 0.650 lagging
B. 0.704 lagging
C. 0.841 lagging
D. 0.677 lagging

265. A coil of 50-Ω resistance and of 150 mH inductance is connected in parallel with a 50-µF
capacitor. The source voltage is 100 sin(wt+30). What is the equation of the line current?

A. 1.91 sin(wt+52.5)
B. 1.25 sin(wt+75.5)
C. 1.82 sin(wt-62)
D. 1.32 sin(wt-75.5)

266. A resistor R is connected in parallel with a 10-Ω inductive reactance. The combination is
then connected in series with a 4-Ω capacitive reactance. The whole combination is connected
across a 100-V, 60 Hz supply. How much is R if the angle between the supply voltage and the
total current is 45?

A. 12 Ω
B. 25 Ω
C. 16 Ω
D. 20 Ω

267. A resistance of 20-Ω and an unknown capacitance are connected in parallel across a 110
V, variable frequency AC source. When the frequency is 60 Hz, the current drawn falls to 5.8
A?

A. 42.33 Hz
B. 50.12 Hz
C. 46.02 Hz
D. 44.18 Hz

268. A single phase capacitor-start-squirrel-cage induction motor take 2.5 A from a 220 V line.
The current in the starting winding is 1.3 A and the current in the main winding is 1.45 A. The
total power input is 550 W. What is the resistance of the main winding? Assume the auxiliary
winding takes a leading current while the main winding takes a lagging current.

A. 139.43 Ω
B. 125.68 Ω
C. 142.45 Ω
D. 151.97 Ω

269. An inductive reactance of 10 Ω is connected in parallel with a capacitive reactance of 30

Ω. If the combination is connected in series with a 10-ohm resistance, solve for the equivalent
power factor of the whole combination.

A. 0.555 lagging
B. 0.586 lagging
C. 0.603 lagging
D. 0.623 lagging

270. A resistor R and a variable capacitor C are connected in parallel. The combination is then
connected in series with an inductive reactance of 25 Ω. The circuit is energized by 110-V, 60
Hz source. If the capacitance is varied until the voltage across the resistor and that across the
inductor are equal to the supply voltage, determine the real power supplied by the source.

A. 537 W
B. 419 W
C. 620 W
D, 402 W

271. Three impedances Z1=1-J4, Z2=-j6, Z3=4+j3 Ω respectively are connected in series
parallel. Z1 is connected in series with the parallel combination of Z2, Z3. Determine the
equivalent impedance of the combination.

A. 4.32-j1.21
B. 2.23-j3.32
C. 6.76-j5.68
D. 5.42-j7.21

272. An inductive reactance of 3Ω is connected in parallel with a capacitive reactance of 4Ω. If

the combination is connected in series with a 4-ohm resistance, solve for the power factor of
the whole combination.

A. 0.333
B. 0.409
C. 0.567
D. 0.316

273. An inductive reactance of 10-Ω is connected in parallel with a capacitive reactance of 30

Ω. If the combination is connected in series with a 10-Ω resistance, solve for total real power if
the whole circuit is connected across a 240 V, 60 Hz supply.

A. 2.05 kW
B. 2.87 kW
C. 1.77 kW
D. 1.25kW

274. A 5-Ω resistor is connected in parallel with a 10-Ω inductive reactance. The combination
is then connected in series with a 4-Ω capacitive reactance. The whole combination is
connected across a 100 V, 60 Hz supply. How much is the total current drawn by the circuit?

A. 22.36 A
B. 20.45 A
C. 23.16 A
D. 19.89 A

275. A non-inductive resistor R is connected in parallel with an inductive reactance of 10-Ω.

The combination is then connected in series with a capacitive reactance of 5 Ω. The whole
combination is connected across a 100 V, 20 Hz AC source. If R is equal to 5 Ω, solve for the
voltage across the parallel combination.

A. 87.53 V
B. 88.34 V
C. 89.44 V
D. 91.87 V

276. Three impedances Z1=1-j4, Z2=-j6 and Z3=4+j3 Ω respectively are connected in series
parallel. Z1 is connected in series with the parallel combination of Z2, Z3. If this circuit is
connected across a 230 V, 60 Hz source, determine the voltage across the parallel combination
of Z2 and Z3.

A. 156.3 V
B. 146.8 V
C, 135.7 V
D. 163.2 V

277. A 30-Ω resistor R is connected in parallel with 0.106-H inductor. The parallel combination
is then connected in series with a 98-F capacitor. If the whole circuit is connected across a 125
V, 60 Hz, find the current through the inductor.

A. 4.51 A
B. 3.26 A
C. 2.72 A
D. 2.34 A

278. Given three impedances: Z1=10+j0, Z2=3+j4 and Z3=8-j6. Impedance Z2 and Z3 are
connected in parallel and the combination is connected in series with impedance Z1 across
120 V single phase 60 Hz source. Find the total power drawn by the impedances.

A. 1006 W
B. 1204 W
C. 1038 W
D. 1103 W
1-phase AC Circuits: Part 3

ADMITTANCE, CONDUCTANCE, SUSCEPTANCE

Admittance - defined as the reciprocal of impedance

Siemens (formerly mho)-unit of admittance. Named after the german engineer, Ernst Werner
von Siemens (1816-1892)

Y=

Series circuit

Note: X is reactance, either inductive or capacitive

G= β=
= Y = G ± Jβ I = EY
Where:
G = conductance (siemens)
Β = susceptance (siemens)
Y = admittance (siemens)
Z = impedance (ohm)
I = current (ampere)
E = supply (volt)
R = resistance (ohm)
X = reactance (ohm)
+jβ = if X is a capacitive reactance
-jβ = if X is an inductive reactance

Parallel circuit

= =
= =
I=E

Where:
= total conductance (siemens)
= total admittance (siemens)
= total susceptance (siemens)
= if βc>
= if βc<

pf =
 SERIES RESONANCE

Resonance - a circuit phenomenon wherein the circuit power factor becomes unity.
Series resonance characteristics:
 Total impedance is minimum
 Total current is maximum

Q-factor = I=

Q - factor =

PARALLEL RESONANCE OR ANTI RESONANCE

Parallel resonance characteristics

 Total impedance is maximum
 Total current is minimum
 I = E[ + ]

Q - factor =
Where:
= resonant frequency
Q-factor = selectivity of the resonant circuit

NON-SINUSOIDAL WAVE

It is a distorted (not perfect) sinusoidal waveform.

Note:
A non-sinusoidal wave can be expressed as a function represented by several waves, a
constant (DC component) plus sinusoidal waves of different frequencies of harmonics.

Example of non-sinusoidal voltage and current equations:

e=
I=

This general expression was first imposed by the French mathematician, Jean Baptiste Joseph
Fourier (1768-1830)

RMS VALUE OF A NON SINUSOIDAL WAVE

Where:
=DC voltage and current
, = rms values of voltages and currents
, = maximum values of voltages and currents

Note:
Subscript 1, means first harmonic component or fundamental component
Subscript 2, means second harmonic component
…….etc.

ACTIVE POWER DRAWN BY THE CIRCUIT

 P=
P=
P= P=
Where:
P = active power (watt)
=equivalent resistance of the circuit (ohm)
pf = power factor

Note:
In dealing with circuit supplied by non-sinusoidal sources, use Superposition Theorem to solve
the problem. As if, analyzed the circuit with the different harmonics including the DC
component as the only source that supplies energy to the circuit.

279. If admittance Y= 0.06-j0.08 mho, then conductance G equals,

A. -0.06
B. 0.06
C. 0.08
D. -0.08

280. A parallel circuit consists of a resistor having a conductance of 4 mhos, an inductive

reactor having a susceptance of 8 mhos and a capacitive reactor having a susceptance of 5
mhos. What is the impedance of the circuit?

A. 0.11+j0.13
B. 0.13+j0.11
C. 0.12+j0.16
D. 0.16+j0.12

281. Two parallel branches have admittances 0.3+j0.4 and 0.2-j0.25, respectively. If the
current in the first branch is 10 A, determine the total current supplied to the parallel
combination.

A. 10.44 A
B. 12.10 A
C. 15.32 A
D. 11.24 A

282. A capacitor branch having a ratio of Xc to R of 5 is paralleled with an impedance

consisting of of a 4 Ω resistance and a 3 Ω inductive reactance. The power factor of the
resulting circuit is 0.8 leading. Find the size of the capacitor in microfarads if the frequency is
60 Hz.

A. 879.9
B. 1078.9
C. 978.9
D. 778.9

283. Two impedances Z1=2+j4 and Z2=R+j0 are connected in parallel. Determine R so that the
power factor of the circuit is 0.9 lagging.

A. 3.2 Ω
B. 2.1 Ω
C. 2.8 Ω
D. 2.5 Ω
284. What value of resistance should be placed in parallel with a 50 µF capacitor in order to
have a total power factor of 0.8 on a 60-cycle AC system?

A. 50 Ω
B. 40 Ω
C. 42 Ω
D. 47 Ω

285. Capacitor of 30-µF capacitor is in series with a coil across an 8,000-cycle supply. What
inductance is required for resonance?

A. 14.34 µF
B. 10.45 µF
C. 13.19 µF
D. 12.55 µF

286. A series RLC circuit is connected across a 110-V, variable frequency source. When the
frequency is varied, the maximum effective current is 5.5 A and occurs at a frequency of 45
cps. At this frequency, the voltage across the capacitor is 200.8 V. Find the pf of the circuit at
60 Hz.

A. 0.686 lagging
B. 0.770 lagging
C. 0.673 lagging
D. 0.602 lagging

287. One leg of a radio-tuned circuit has capacitance of one times ten to the minus nine farad.
It is tuned at 200 kHz, what is the inductance of the other leg in henry?

A. 6.33x
B. 8.25x
C. 20x
D. 120x

288. A load speaker whose inductance is 1.15 henries is coupled to a power tube through a
condenser of 2µF capacity. To what frequency will the combination be resonant?

A. 110 Hz
B. 108 Hz
C. 105 Hz
D. 100 Hz

289. What capacitance must be placed in series with an inductance of 0.05 H so that at 100 Hz,
the impedance becomes equal to the ohmic resistance?

A. 50.7 µF
B. 35.5 µF
C. 70.7 µF
D. 87.0 µF

290. A coil has a resistance of 50 Ω and a reactance of 100 Ω, is shunted by a capacitor, which
has practically no losses in order that the voltage across the coil be in phase with the total
current supplied to the parallel combination. What is the impedance of the parallel
combination under the given condition?
A. 250 Ω
B. 200 Ω
C. 230 Ω
D. 220 Ω

291. A non-inductive resistor R is connected in parallel with an inductive reactance of 10 Ω.

The combination is then connected in series with a capacitive reactance of 5 Ω. Solve for R at
which the power factor of the given circuit would be unity.

A. 10 Ω
B. 12 Ω
C. 13 Ω
D. 11 Ω

292. A 10 Ω resistor is connected in parallel with an inductive reactance of 10 Ω. The

combination is then connected in series with a capacitive reactance of 6 Ω. Solve for the
frequency at resonance. The indicated values have been derived at 50 Hz.

A. 68.08 Hz
B. 61.22 Hz
C. 67.51 Hz
D. 64.23 Hz

293. A 300 Ω inductive reactance is connected across a series combination of a resistor R and a
capacitive reactance Xc. Solve for R if the equivalent impedance of the combination is a pure
resistance of 100 Ω.

A. 92 Ω
B. 88 Ω
C. 78 Ω
D. 90 Ω

294. Two impedances Z1=15+j20 and Z2=5-jXc are connected in parallel. Solve for the value of
Xc so that the total current drawn by the combination will be in phase with any supply voltage
V.
A. 28.54 Ω
B. 30.43 Ω
C. 33.12 Ω
D. 29.55 Ω

295. A coil whose resistance is 10 Ω and inductance of 50 mH is connected is connected in

parallel with series combination of 5 Ω resistance and a variable capacitor C. The circuit is
supplied by a 220-V, 60 Hz frequency. Calculate the power (minimum value for Xc) delivered
by the source at resonance.

A. 10.31 kW
B. 15.35 kW
C. 14.65 kW
D. 11.07 kW

296. A resistance of 5 Ω is connected in series with a capacitor of 442.1 µF. The combination is
then connected in parallel with an inductance of 21.22 mH. Solve for the frequency of the
impressed voltage with which the inductive reactance is equal to the capacitive reactance in
magnitude.

A. 50 Hz
B. 51 Hz
C. 52 Hz
D. None of these

297. An impedance of 4-j3 Ω is connected in parallel with an ideal inductor L across a 110 V, 60
Hz mains. Determine L if the total voltage supplied to the circuit will be in phase with the total
current drawn.

A. 16.6 mH
B. 19.2 mH
C. 22.1 mH
D. 26.8 mH

298. A coil has a resistance of 50 Ω and a reactance of 100 Ω, is shunted by a capacitor, which
has practically no losses. What must be the reactance of the capacitor in order that the
voltage across the coil be in phase with the total current supplied to the parallel combination?

A. 120 Ω
B. 127 Ω
C. 125 Ω
D. 132 Ω

299. Three impedances Za, Zc, Zr are connected in parallel. If at 60 Hz, Za=0+j8, Zc=0-j2 and
Zr=5+j0 Ω. Solve for the frequency at resonance.

A. 30 Hz
B. 34 Hz
C. 36 Hz
D. 28 Hz

300. A resistance R is connected in parallel with a variable inductive reactance Xl. The
combination is connected in series with impedance of 5-j2 Ω. Solve for R, such so there is only
one condition of resonance as Xl as varied.

A. 2 Ω
B. 5 Ω
C. 3 Ω
D. 4 Ω
301. A resistor R is connected in parallel with a 20-ohm inductive reactance. The combination is then
connected in series with a 5-ohm capacitive reactance. Solve for the value of R at which the power
factor of the resultant impedance is unity.

A. 10.05 Ω

B. 9.15 Ω

C. 11.55 Ω

D. 10.73 Ω

302. A coil consumes 2,000 watts, while drawing current of 25 A from a 110-V, 100 Hz AC source.
Determine the capacitance of a capacitor to be connected in parallel with the coil in order to make the
total current be in phase with the supply voltage.

A. 236 µF

B. 240 µF

C. 248 µF

D. 205 µF

303. A coil having an impedance of 10+j5 ohms is connected in parallel with a series combination of a
variable resistance of R and a capacitor having a reactance of 8 ohms. The combination is connected across a
24-V AC source. Determine the total current drawn if R is adjusted in order to bring the total pf of the circuit
to unity.

A. 3.32 A

B. 4.54 A

C. 2.28 A

D. 4.07 A

304. A coil has a resistance of 50 ohms and a reactance of 70 ohms. A capacitor is connected in parallel to
produce resonance. The source voltage is 120 V. What is the power drawn by the circuit?

A. 162 W

B. 97 W

C. 132 W

D. 52 W

305. A coil whose resistance is 100 Ω and inductance L1 is connected in parallel with a series combination
of inductance L2 and capacitance C. When w=1x105, the impedance of the whole combination is 300
ohms, purely resistive. When w=2x105 no current flows towards the coil. Find the value of C.

A. 38.23 nF

B. 34.02 nF
C. 35.36 nF

D. 32.77 nF

306. A series RLC circuit has a Q of 5.0 at its resonance frequency of 100 kHz. Assuming the power
dissipation of the circuit is 100 W when drawing a current of 0.8 A, determine the capacitance C of the
circuit.

A. 2.04 nF

B. 2.32 nF

C. 3.02 nF

D. 2.54 nF

307. An impedance coil draws an apparent power of 50 volt-amperes and an active power of 40 watts.
Solve for the Q-factor of the coil.

A. 0.6

B. 1.25

C. 0.8

D. 0.75

308. A coil is supplied with 200 volts and takes a current (rms) of 2 amperes at 0.707 lagging. The
quality factor (Q) of the coil is.

A. 25

B. 1

C. 10

D. 100

309. A non-inductive resistor of 10 ohms requires a current of 8 A and is to be feed from a 200V, 50 Hz
supply. If a choking coil of effective resistance 1.2 ohms is used to cut down the voltage, find the
required Q-factor of the coil.

A. 18.6

B. 14.2

C. 20.3

D. 16.7

310. The total current in a given circuit has the equation:

i = 10 + 16 sinwt – 8 sin2wt + 5 cos3wt. Calculate the effective value of the current. A. 18.3

B. 12.2 A
C. 16.5 A

D. None of these

311. Determine rms value of the current drawn by a 2 µF condenser, which is connected across a source
of potential. The potential has a third and fifth harmonic components, which are 30% and 20%
respectively of the fundamental. The fundamental sinusoidal component has a peak value of 1000 volts and
60 Hz frequency.

A. 0.89 A

B. 0.75 A

C. 0.91 A

D. 0.84 A

312. A capacitor of 3.18 microfarads is connected in parallel with a resistance of 2,000 ohms. The
combination is further connected in series with an inductance of 795 mH and resistance of 100 ohms across a
supply given by e = 400 sinwt + 80 sin (3wt + 60°), Assume w = 314 radians/sec. Determine the rms value
of the total current.

A. 0.40 A

B. 0.33 A

C. 0.56 A

D. 0.45 A

313. Determine the effective value of the circuit current of an emf of 151 sin 377t is connected in series
with a DC emf of 110 volts. Both supply a load of 10 + j8 ohms

A. 10.3 A

B. 12.5 A

C. 13.8 A

D. 11.4 A

314. An alternating current and a direct current flows simultaneously in the same conductor. If the
effective value of the alternating current is 5 A and the direct current is 10 A, what will an AC ammeter
read when connected in the circuit?

A. 7.5 A

B. 15 A

C. 11.18 A

D. None of these

315. A 100∠0° V 120 Hz generator and a 80∠0° V 60 Hz generator are connected in series with a 60 V
battery and a coil. The resistance and inductance of the coil are 3 Ω and 2.65 mH, respectively.
Determine the rms current of the coil.
A. 42.54 A

B. 44.24 A

C. 43.55 A

D. 40.44 A

316. If e = 100 sin (wt + 30°) – 50 cos 3wt + 25 sin (5wt +150°) and i = 20 sin (wt + 40°) + 10 sin(3wt + 30°)
– 5 sin (5wt - 50°). Calculate the power in watts.

A. 1177

B. 918.5

C. 1043

D. 922.4

317. Find the average power in a resistance R = 10 ohms, if the current in the Fourier series form is i =
12 sinwt + 8 sin3wt + 3 sin5wt amperes.

A. 1085 W

B. 1203 W

C. 1150 W

D. 1027 W

318. A capacitor of 3.18 microfarads is connected in parallel with a resistance of 2,000 ohms. The
combination is further connected in series with an inductance of 795 mH and resistance of 100 ohms across
a supply given by e = 400 sinwt + 80 sin (3wt + 60 °), Assume w = 314 radians/sec. Determine the power
dissipated.

A. 74.66 W

B. 78.05 W

C. 80.28 W

D. 75.66 W

319. A series RL circuit in which R = 5 Ω and L = 20 mH has an applied voltage e = 100 + 50 sinwt + 25
sin3wt, with w = 500 radians per sec. Determine the power dissipated in the resistor of the circuit.

A. 2510 W

B. 2234 W

C. 2052 W

D. 2302 W

320. Three sinusoidal generators and a battery are connected in series with a coil whose resistance
and inductance are 8 Ω and 26.53 mH, respectively. The frequency and rms voltages
of the respective generators are 15 V, 20 Hz; 30 V, 60 Hz and 40 V, 100 Hz. The open circuit of the
battery is 6 V. Neglect internal resistance of the battery. Find the apparent power delivered by the
circuit.

A. 194.4 VA

B. 178.5 VA

C. 198.3 VA

D. 182.7 VA

321. A series circuit containing a 295 µF capacitor and a coil whose resistance and inductance are Ω and
4.42 mH, respectively are supplied by the following series connected generators: 35 V at 60 Hz, 10 V at
180 Hz and 8 V and 240 Hz. Determine the power factor of the circuit.

A. 0.486

B. 0.418

C. 0.465

D. 0.437

322. A capacitor of 3.18 microfarads is connected in parallel with a resistance of 2,000 ohms. The
combination is further connected in series with an inductance of 795 mH and resistance of 100 ohms
across a supply given by e = 400 sinwt + 80 sin (3wt + 60°), Assume w = 314 radians/sec. Determine the
circuit power factor.

A. 0.702

B. 0.650

C. 0.633

D. 0.612

ANSWER KEY

279. B 288. C 297. C 306. A 315. A

280. D 289. A 298. C 307. D 316. B
281. A 290. A 299. A 308. B 317. A
282. D 291. A 300. D 309. A 318. A
283. A 292. B 301. C 310. C 319. C
284. B 293. D 302. C 311. A 320. A
285. C 294. B 303. A 312. A 321. D
286. A 295. A 304. B 313. C 322. B
287. A 296. C 305. C 314. C
 3-Phase AC System: Part 1

Polyphase System

It consists of an arrangement with two or more similar single-phase systems in which the
maximum values of the independent voltages do not occur at the same time.

Advantages of polyphase system over single-phase system:

a. Polyphase machines like motors, generators, and transformers are simpler, cheaper,and
more efficient.

b. Polyphase transmission lines can deliver more power for a given weight and cost.

c. Voltage regulation of polyphase lines is inherently better.

n-Phase Star Connected System

One terminal of each phase (windings) is connected together while the other terminalsrepresent the
line terminals.

n-Phase Mesh Connected System

Each phase (windings) is connected end to end thus forming a closed geometric figure. The lineterminals
are tapped at each phase terminals.
 n-Phase Active Power Formula

P = nVPIPcosθ

Where:

n = number of phases VL

= line to line voltageVP =

phase voltage

IL = line current

IP = phase current
cos θ = load power factor

Three-Phase System

Most commonly used polyphase system. It is an interconnection of three single phase systems, whose
voltage waves, though similar in amplitude and frequency are displaced 120 electrical degrees apart.

Phase Sequence

The order of rotation of the coil voltage in a balanced polyphase system.

Example: If phase sequence is a-b-c, this means that “vector A” comes first, followed by “vector B” and
then “vector C”. (Refer to the vector diagram)

Note: Vector A is the reference vector according to the given sequence. Vector rotation unless otherwise
specified is assumed to rotate in a counterclockwise direction.
 Wye or 3-Phase Star Connected Balanced System

Phasor diagram V12 as reference:

Delta or 3-Phase Mesh-Connected Balanced System

 Wye-Connected Balanced Loads

Note: If loads are unbalanced, transform the wye-connected loads into an equivalent deltaconnected
load and analyze it using delta connected load principles.

Neutral Current

Current that flows in the neutral conductor, which is equal to the algebraic sum of the three line
currents.

I N = I1 + I2 + I3

From the concept of conservation of current and charge, the algebraic sum of the currents in a given
node is zero. Hence, the algebraic sum of the three line currents vanishes when no neutral connection
exists.

I1 + I2 + I3 = 0

Delta-Connected Balanced or Unbalanced Loads

If balanced loads: (Refer to the circuit diagram)Z1 =

Z2 = Z3 = Z

I12 = I23 = I31 = IPI1

= I 2 = I3 = IL

If unbalanced loads: (Refer to the circuit diagram)Z1 ≠

Z2 ≠ Z3

Note: All quantities (voltages, impedances and currents) must be in complex form and all
mathematical operations must be done under the rules in complex operations.

Three-Phase Power Formulas

 TEST 10

323. A 170 kV, 3-phase electric source delivers 200 MVA to a balanced load, which has a powerfactor of
90% lagging. What is the line current?

A. 257 A

B. 502 A

C. 402 A

D. 679 A

324. A three-phase motor is rated 50 hp, 440 volts and 85% power factor. What is its rated current?A. 61.5

B. 57.5 A

C. 55 A

D. 59 A

325. A balanced 3-phase load draws 120 amperes line current at 230 volts line to line, 0.848 pflagging
current. Solve for the real power.

A. 40.54 kW

B. 42.35 kW

C. 41.45 kW

D. 43.15 kW

326. A generator supplies three-phase power to balanced load. The voltage is 230 volts. The currentis 18 A
and the power factor is 85%. What is the power?

A. 3.6 kW

B. 1.6 kW

C. 6.1 kW

D. 1.4 kW

327. A balanced 3-phase load draws 75 amperes line current at 230 V line to line and 0.848 laggingpower
factor. Solve for the reactive power being drawn.

A. 15.83 kVAR

B. 15.26 kVAR

C. 15.35 kVAR

D. 15.94 kVAR

328. The input power factor to a three-phase, 6-poles, 460 volts, 60 Hz, 50-hp induction motor is
0.62 as 20 A is drawn by the motor. Find the power input to the motor.A.

9,880 W
B. 9,675 W

C. 9,895 W

D. 9,478 W

329. A 460 volt, three-phase motor draws 208 A with a power factor of 0.91 lagging. Calculate the kW input
to the motor.

A. 150.8

B. 156.3

C. 152.4

D. 160.3

330. Determine the ratio of the line current drawn by three identical impedances connected in wye to the
line current drawn by the same impedances connected in delta. Both connections being impressed with the
same balanced 3-Φ voltages.

A. 1:2

B. 3:4

C. 2:3

D. 1:3

331. A wye-connected load has a 5∠20° ohm impedance per phase and is connected across a 120-V
three-phase source. Calculate the line current.

A. 24 A

B. 13.85 A

C. 41.56 A

D. 15.45 A

332. A balanced delta connected load having impedance per phase of 20∠36.87° ohms is supplied from
a balanced 3-phase, 240 V source. Determine the total real power.

A. 6824 W

B. 6912 W

C. 7015 W

D. 6740 W

333. Three condensers, each having a capacity of 75 microfarads are connected in star to a 440 volt, 3-
phase, 50 cycles supply. Calculate the capacitance of each of three condensers so that when they are
connected in delta to the same supply the line current remains the same.

A. 20 µF

B. 28 µF
C. 25 µF

D. 30 µF

334. Three impedances, -j10, j10 and 10 ohms are wye connected. Determine the impedance of an
equivalent delta.

A. 12.5, j12.5, -12.5 ohms

B. 10, j10, -j10 ohms

C. j8.5, -j12.5, 8 ohms

D. 5, j5, -j5 ohms

335. A system consisting of three equal resistors connected in star is fed from a three-phase supply.By how
much is the power reduced if one of three resistors is disconnected?

A. 1/3

B. 3/4

C. 1/2

D. 2/3

336. A balanced three-phase load is wye-connected and has an impedance ZP = 4 – j3 ohms perphase.
Find the line current if this load is connected across a 220 V three-phase source.

A. 25.4 A

B. 22.3 A

C. 20.5 A

D. 26.7 A

337. Three 10-ohm resistances are connected delta on a balanced three-phase source. If the
equation of the phase Van =120 sin wt. What is the equation of the line current in line a?

A. 20.78 sin (wt + 30°)

B. 13.15 sin (wt - 30°)

C. 12 sin (wt – 56.56°)

D. 36 sin wt

338. Given a balanced 3-wire, three-phase system serving the following loads:Vab =

200∠0° V Zab = 10∠53.13° Ω

Vbc = 200∠240° V Zbc = 10∠0° Ω

Vca = 200∠120° V Zab = 10∠30° Ω

Determine line current on line b.A.

20.34 A
B. 22.04 A

C. 24.36 A

D. 21.57 A

339. Given the following line voltages and two load impedances:

Vab = 117∠0° V Zab = 5 + j12 Ω

Vbc = 117∠240° V Zbc = 13 + j0 ΩVca

= 117∠120° V

Solve for the line current in line c.A.

17.41 A

B. 17.95 A
C. 16.62 A

D. 18.46 A

340. Three unequal single-phase loads so connected across the lines of a balanced 3-phase, 230 volts
circuit. The first takes 106 A at 0.78 lagging and is connected across lines 1 & 2. The second takes 142 A,
at 0.82 pf lagging and is connected across lines 2 & 3. And the third takes
28.4 W at 0.77 pf lagging and is connected across line 3 & 1. Find the three line currents. A.

254.40 A, 211.38 A, 252 A

B. 231.26 A, 215.20 A, 268 A

C. 254.40 A, 215.20 A, 252 A

D. 231.26 A, 211.38 A, 268 A

341. A 120-V per phase, three-phase Y connected source delivers power to the following delta-
connected load:

Phase 1 = 40∠0° Phase 2 = 20∠-60° Phase 3 = 15∠45°

Determine the three line currents.

A. 12.45 A, 9 A, 22.45 A

B. 13.49 A, 9 A, 22.45 A

C. 13.49 A, 10 A, 20.22 A

D. 12.45 A, 10 A, 20.22 A

342. Given:

Vab = 240∠0° V Zab = 6 + j8 Ω

Vbc = 240∠240° V Zbc = 5 + j8.66 Ω

 Vca = 240∠120° V Zca = 10 + j0 Ω

Solve for the three line currents Ia, Ib, and Ic.

A. Ia = 45 A, Ib = 43 A, Ic = 20 A

B. Ia = 48 A, Ib = 42 A, Ic = 24 A

C. Ia = 45 A, Ib = 42 A, Ic = 20 A

D. Ia = 48 A, Ib = 43 A, Ic = 24 A

343. A three-phase 230-V circuit serves two single phase loads, A and B. Load A is an induction motor
rated 8 hp, 230 V, 0.70 pf, 0.90 efficiency, which is connected across lines a and b. Load B draws 5 Kw at
1.0 pf and is connected across lines b and c. Assume a sequence of a-b-c, solve for the line current on
line b.

A. 42.19 A

B. 27.74 A

C. 41.08 A

D. 34.46 A

344. A four wire 208 V three-phase system is used to supply power to a three-phase 5-hp induction
motor and a single phase 6 kW heater connected between line c and the neutral line. The operating
efficiency and power factor of the motor are 81 and 71 percent, respectively. Calculate the current in
line c. Assume a phase sequence of a-b-c.

A. 71 A

B. 75 A

C. 64 A

D. 69 A

345. A factory is supplied by a three-phase, 3-wire system with the following characteristics:Vab =

230∠0° V Ia = 110∠-36.87° A

Vbc = 230∠240° V Ic = 125∠53.13° A

Find the line current Ib

A. 145.3 A

B. 163.3 A
C. 184.6 A

D. 166.5 A

346. Given a balanced 3-wire, three-phase system serving an unbalanced wye-connected load.
Determine the line current in line a.
 Vab = 210∠0° V Zan = 10 Ω

Vbc = 210∠120° V Zbn = 10 + j10 Ω

Vca = 210∠240° V Zcn = 10 Ω

347. Three resistors 10, 15 and 30 ohmic values are connected in wye-configuration to a balanced 208-
volt three-phase supply. Calculate the total power of the system.

A. 2644 W

B. 2880 W

C. 3080 W

D. 3280 W

348. Three impedances each 10 + j5 ohms are connected in delta on a balance three-phase source. If
the equation of the phase voltage is Van = 120 sin wt. What is the equation of the current through the
impedance connected across phase A and B?

A. 20.02 sin (wt - 22°)

B. 18.59 sin (wt + 3.44°)

C. 16.21 sin (wt + 56.56°)

D. 21.32 sin (wt – 8.15°)

349. Two parallel connected loads A and B are supplied by a 440 V, 3-phase, 60 Hz generator. Load A
draws an apparent power of 100 kVA at 0.80 pf lagging and load B draws an apparent power of 70 kVA
at unity pf. Determine the feeder current.

A. 208 A

B. 212 A

C. 214 A

D. 202 A

350. Two different loads A and B are connected across a balanced 230 V, 3-Φ lines. Load A is a three-
phase load that draws 10 kVA at 70% lagging pf. Load B is a single-phase load connected across lines a
and b drawing 5 kVA at unity pf. Determine line current in line a. Assume a phase sequence of a-b-c.

A. 37 A

B. 42 A

C. 31 A

D. 46 A

351. A three-phase motor takes 10 kVA at 0.6 pf lagging from a source of 230 volts. It is in parallel with
a balanced delta load having 16 ohms resistance and 12 ohms capacitive reactance in series in each
phase. Determine the total power factor.
A. 0.966 lagging

B. 0.896 lagging

C. 0.917 lagging

D. 0.967 lagging

352. A balanced delta load whose impedance is 45∠70° ohms per branch, a three-phase motor that
draws a total of 10 kVA at 0.65 pf lagging and a wye connected load whose impedance is 10 ohms
(resistance) per branch are supplied from a three-phase, three-wire, 208 V, 60 Hz feeder. Determine
overall power factor of the feeder loads.

A. 0.753

B. 0.706

C. 0.826

D. 0.762

353. A three-phase 230-V circuit serves two single phase loads, A and B. Load A is an induction motor
rated 8 hp, 230 V, 0.70 pf, 0.90 efficiency, which is connected across lines a and b. Load B draws 5 kW at
1.0 pf and is connected across lines b and c. Assume a sequence of a-b-c, solve for the total power factor
of the load.

A. 0.907

B. 0.704

C. 0.864

D. 0.886

354. A 440-V three-phase, 3-wire wire, 60 Hz feeder supplies power to two 30-hp induction motors.
One motor is operating at full load, 85% efficiency and has a power factor of 90%. The other motor is
operating at one-half of its rated horsepower, 89% efficiency and has a power factor of 78%. What is the
overall power factor of the system of motors?

A. 0.862 lagging

B. 0.826 lagging

C. 0.838 lagging

D. 0.801 lagging

355. Three unequal single-phase loads so connected across the lines of a balanced, 3-phase, 230 volts
circuit. The first takes 106 A at 0.78 pf lagging and is connected across lines 1 & 2. The second takes 142
A, at 0.82 pf lagging and is connected across 2 & 3. And the third takes
28.4 kW at 0.77 pf lagging. Determine total apparent power.
A. 94 kVA

B. 83 kVA
C. 78 kVA

D. 101 kVA

356. Two balanced Y-connected loads A and B are connected across a three-phase 3-wire balanced
system. Load A draws 6 kW at 80% power factor lagging while load B draws 12 kW at 83.5% power
factor leading. If the current in the three lines are each equal to 8 A, determine the current drawn by
load A.

A. 4.45 A

B. 3.58 A

C. 4.15 A

D. 3.28 A

357. The phase b line voltage and the phase a line current of a balanced three-phase system are V = 220
sin (wt + 210°) and I = 10 sin (wt - 30°), respectively. What is the power of the system.

A. 1905 W

B. 3300 W

C. 5716 W

D. 3810 W

358. The following information is given for a delta-connected load of three numerically equal
impedances that differ in power factor: Line voltage = 120 volts; Zab = 15∠30°; Zbc = 15∠30°; Zca
= 15∠-30° phase sequence of voltages is a-b-c. Using the phase sequence as a guide,calculate the total
power drawn by the load.

A. 2,624 W

B. 2,472 W

C. 2,564 W

D. 2,731 W

359. A three-phase motor takes 10 kVA at 0.6 pf lagging from a source of 230 volts. It is in parallel with
a balanced delta load having 16 ohms resistance and 12 ohms capacitive reactance in series in each
phase. Determine the total line current.

A. 30.05 A

B. 34.55 A

C. 32.04 A

D. 31.24 A
360. In AC circuits, find the total power in kW in an unbalanced three-phase circuit loaded as follows:
Phase I = 120 V, 100 A, unity pf, Phase II =100 V, 230 A, 80% pf and phase III = 110 V, 85 A, 77% pf.

A. 37.6 kW

B. 35.3 kW

C. 32.8 kW

D. 38.2 kW

361. Two single-phase transformers are connected in V (open delta) and serving a delta connected
impedance load, each impedance is equal to 16∠36.87° ohms. If the transformer voltages impressed on
the impedances are:

Vab = 240∠0°, Vab = 240∠240° V, Vab = 240∠120° volts Solve

for the total kVA drawn by the load.

A. 6.23

B. 8.31

C. 10.8

D. 11.3

362. Three impedances, Zan = 20 + j0, Zbn = 16 + j12, Zcn = 5 – j15 ohms, are connected in wye across a
230 V (line to line), 3-phase, 4-wire source. The phase sequence is a-b-c, counterclockwise. Determine
the current passing through the neutral.

A. 7.54 A

B. 9.12 A

C. 8.81 A

D. 8.02 A

363. A wye-connected transformer with neutral connection has balanced voltages of 265 V between
lines and neutral. The transformer is serving two single-phase motors. Motor A (rated 4 hp, 0.90
efficiency, 0.80 power factor lagging) is connected across line a and neutral. Motor B (rated 3 hp, 0.85
power factor lagging) is connected across line b and neutral. Solve for the neutral current, using Van as
reference vector.

A. 20.42 A

B. 25.37 A

C. 22.45 A

D. 23.14 A

364. Two-single phase motors are connected between the lines and neutral terminals of a 3- phase, 4-
wire, 230 V secondary side of a three-phase transformer. Load A is connected across
line a and neutral while B is across line b and neutral. The currents Ia and Ib are 40 A, 0.707 pflagging,
and 25 A unity pf respectively. Determine neutral current In.

A. 54.25 A

B. 50.34 A

C. 51.86 A

D. 52.37 A

365. Two single-phase motors are connected to a 3-phase, 4-wire wye feeder having 220 V between
phase and the neutral. One motor rated 5 hp, 0.866 pf lagging and 90% eff is connected across phase A
and neutral. The second motor is connected across phase C and neutral, and rated 3 hp, 0.707 pf lagging
and 90% eff. Solve for current through the neutral.

A. 20.56 A

B. 29.54 A

C. 21.67 A

D. 23.43 A

366. A 230 V, three-phase, 4-wire balanced system supplies power to group of lamp loads. If the line
currents are respectively 60 A, 86 A and 40 A respectively, solve for the current in the neutral wire.
Assume the power factor of the lamps to be unity.

A. 40 A

B. 14 A

C. 66 A

D. 36 A

367. The loads of a wye-connected transformer are:Ia =

10 cis (-30°)

Ib = 12 cis 215°

Ic = 15 cis 82°

What is the neutral current?A.

1.04 cis 72.8°

B. 2.21 cis (-30°)

C. 0.92 cis 62.5°

D. 3.11 cis 72.8°

ANSWER KEY

323. D 332. B 341. B 350. A 359. C

324. B 333. C 342. D 351. D 360. A
325. A 334. B 343. C 352. A 361. C
326. C 335. C 344. C 353. C 362. C
327. A 336. A 345. D 354. A 363. D
328. A 337. D 346. C 355. A 364. D
329. A 338. B 347. A 356. D 365. D
330. D 339. B 348. B 357. B 366. A
331. B 340. D 349. B 358. A 367. D
 3-Phase AC System: Part 2
Power Measurement Using a Wattmeter

Where: θ = angle between VL and ILCos

θ = load power factor

3-Phase Power Measurement with Balanced Load Using Only A Single Wattmeter

If neutral point is available, then the single-phase wattmeter is connected to measure phase3-power
as shown.

Where: W = wattmeter reading

Potential-lead shift method

In this scheme the current coil of the wattmeter is inserted in one line, say line 1. One of the potential
coil terminals is connected to the same line while the other is shifted or touched to line 2 for one
reading and to line 3 for another reading.

Where:

W’ = wattmeter reading on first position

W’’ = wattmeter reading on second position

Artificial neutral method

If three equal resistances are connected in star across the lines of a three-phase source, its neutral point
will at every instant of time be exactly the same electrical potential as the neutral point of the load.

Where: W = wattmeter reading

T – method

In this method, the current coil is inserted in one line say line 1 and one of the potential coil terminals is
connected to the same line. The other terminal is fastened to the junction between a pair of equal
resistance, the free ends of which is connected to the other two lines.

Where: W = wattmeter reading

Current transformer (CT) method

This scheme gives direct measurement of the total power. It employs a pair of current transformers and
a single wattmeter. The current coil of the wattmeter is connected to carry a current, which is the
geometric difference of the currents of the secondaries of the CTs.

Where: W = wattmeter reading

 n-Phase Power Measurement Using “n” Number of Wattmeters

Note: The load may be either balanced or unbalanced

Note: Point O is an arbitrary common junction and no restriction is placed upon the location of this
point.

n-Phase Power Measurement Using” n-1” Number of Wattmeters

Any one of the “n” wattmeters maybe eliminated by transferring the point O from its arbitrary position
in space to one of the “n” lines. This causes the voltage across the potential coil to one of the “n”
wattmeters to vanish, and reduces its reading to zero. Thus, the wattmeter whose reading is now zero
can be removed from the circuit and the total power can be measured by means of “n-1” wattmeters.

If point O is transferred to line 1, W1 = 0.

Where: θ21 = angle between V21 and I2θ 31 =

angle between V31 and I3

If point O is transferred to line 2, W2 = 0

Where: θ12 = angle between V12 and I1θ 32 =

angle between V32 and I3

If point O is transferred to line 3, W3 = 0

Where: θ13 = angle between V13 and I1θ 23 =

angle between V23 and I2

 Two-Wattmeter Readings when Load is Balanced

Where: VL = line to line voltageIL

= line current

θ = load power factor angle

Power Factor Computation Using the Two-Wattmeter Readings

Note: This formula is only applicable if load is balanced.

 Test 11

368. A factory is supplied by a three-phase, 3-wire system with the following characteristics:Vab =

230∠0° V Ia = 110∠-36.87° A
Vbc = 230∠240° V Ic = 125∠53.13° A

Determine the power consumed by the load.A.

42.76 kW

B. 48.78 kW
C. 40.23 kW

D. 45.12 kW

369. A 3-phase, 3-wire feeder has the following line currents and the line voltages: Vab =

220∠0° V Iaa = 30 – j30 A

Vbc = 220∠240° V Icc = 29 + j39.8 A

Determine the reactive power supplied by the feeder.

A. 7.75 kVAR

B. 7.34 kVAR

C. 8.32 kVAR

D. 8.45 kVAR

370. Given a balanced three-phase system with the following loads:Vab =

230∠0° V Zab = 60 Ω

Vbc = 230∠120° V Zbc = 30 + j50 Ω

Vca = 230∠240° V Zca = -j80 Ω

Determine the reading of the two wattmeters properly connected using line c as the commonpoint.

A. 440.9 W, 907.5 W

B. 394.1 W, 951.2 W

C. 440.9 W, 951.2 W

D. 394.1 W, 907.5 W

371. Given a balanced 3-wire, three-phase system serving the following loads;Vab =

220∠0° V Zab = 11∠0° Ω

Vbc = 220∠240° V Zbc = 11∠45° Ω
 Vca = 220∠120° V Zca = 11∠30° Ω

Determine the reading of the two wattmeters with line b as common. A.

6921.5 W, 4820 W

B. 6921.5 W, 4400 W
C. 6342.5 W, 4650 W

D. 6342.5 W, 4400 W

372. The following voltages and line currents were measured to a 3-phase, 3-wire feederserving
a commercial building:

Vab = 2400∠0° V Ia = 85∠330° A

Vbc = 2400∠240° V Ic = 100∠80° A

Solve for the real power in kW drawn by the commercial building.A.

402.2

B. 404.5
C. 419.3

D. 421.5

373. A 3-phase, 3-wire load draws the following line currents:

Ia = 60∠330° A Ib = 78.4∠214° A Ic = 75∠80° A

If the voltages impressed on the load are balanced 3-phase, having a magnitude of 4140 voltsline to
line, solve for the total power in kW.

A. 556.15

B. 506.85

C. 536.54

D. 520.18

374. Given the following voltages and load impedances:Vab

= 220∠0° V Zab = 11∠36.87° Ω

Vbc = 220∠240° V Zbc = 10∠0° Ω

Vca = 220∠120° V Zca = 10∠45° Ω

Determine the reading of a kW meter connected with its current coil connected in line b whilethe
potential coil connected across lines b and c.

A. 5.12 kW

B. 4.26 kW
C. 4.08 kW

D. 5.45 Kw

375. Given the following load impedances in delta and the impressed voltages as follows: Vab =

220∠0° V Zab = 8 + j6 Ω

Vbc = 220∠240° V Zbc = 8.66 – j5 Ω

Vca = 220∠120° V Zca = 10 + j0 Ω

What will be the reading of the two wattmeters connected to measure total power? Use line a asthe
common potential point.

A. 3.869 kW, 9.031 kW

B. 2.546 kW, 8.357 kW

C. 3.125 kW, 6.778 kW

D. 4.055 kW, 9.848 kW

376. The 3-phase power supply to a factory has the following measurements:Vab =

240∠0° V Ia = 120∠330° A

Vbc = 240∠240° V Ib = 157∠214° A

Vca = 240∠120° V Ic = 150∠80° A

Solve for the total power drawn.

A. 60.2 kW

B. 56.5 kW

C. 58.8 kW

D. 62.4 kW

377. Given Vab = 220∠0° V, Vbc = 220∠-120° V, Vca = 220∠-240° V

Determine the reading of the wattmeter as shown.A.

405.45 W

B. 486.32 W
C. 442. 88 W

D. 467.54 W

378. A balanced 3-phase load draws 120 amperes line current at 230 volts line to line, 0.848 pf lagging
current. Solve for the readings of the two wattmeters used to measure the 3-phase power.

A. 25.543 kW, 15.087 kW

B. 28.155 kW, 12.385 kW

C. 24.365 kW, 16.175 kW

D. 27.583 kW, 12.957 Kw

379. A number of incandescent lamps are connected in delta across the lines of a balanced 230 V, 3-
phase, 3-wire system. A single-phase wattmeter is connected in the circuit. The current coil of the meter
is connected in line 1 while the potential coil is connected across 1 and 3. This wattmeter registers 8.4
kW. If the potential terminal of the meter, which was connected in line 3, is transferred to line 2, the
wattmeter reads 7.5 kW. If each lamp is rated 100 W, how many lamps are connected across lines 1 and
2. Assume lamp pf to be unity.

A. 42

B. 45

C. 43

D. 44

380. MERALCO used two wattmeters to measure the balanced 3-phase dynatron elevator motor drive.
The current coils of the wattmeters are connected to the current transformers, which are in lines 1 and
2 respectively. The potential coils are connected to potential transformers, which are across lines 2 & 3
and lines 3 & 1, respectively. The line potentials are 230 V and the line currents are each 150 A. The
wattmeters each indicate 19.6 kW. Assume load is wye-connected. What is the total power supplied?

A. 49.175 kW

B. 48.236 kW

C. 45. 461 kW

D. 47.350 kW

381. A 460 volt, three-phase motor draws 208 A with a power factor of 0.91 lagging. Calculate the
indications of W1 and W2 for the given condition.

A. 75.40 kW, 75.40 kW

B. 91.23 kW, 59.58 kW

C. 89.56 kW, 61.25 kW

D. 95.24 kW, 55.57 kW

382. Two wattmeters are used to measure the power delivered to a balanced delta connection load.
Wattmeter 1 reads 1000 W and wattmeter 2 reads 500 W after the current coil terminals are reversed. If
the line-to-line voltage is 208 V, solve for the line current drawn by the load.

A. 8.23 A

B. 7.57 A

C. 8.08 A
D. 7.34 A

383. The power drawn by a three-phase balanced load is measured using two wattmeters properly
connected. At what power factor will the reading of one of the wattmeters be zero?

A. 0.866

B. 1.0

C. 0.5

D. 0.707

384. Two wattmeters connected to a three-phase 440 V squirrel cage induction motor indicate a total of
12 kW. If the operating power factor of the motor is 0.4, determine the individual reading of the
wattmeters.

A. 10.46 kW, 1.60 kW

B. 9.24 kW, 2.76 kW

C. 13.94 kW, -1.94 kW

D. None of these

385. A 3-phase induction motor is connected across a 220-V three-phase source. A wattmeter reads
600 W when its current coil is connected in line 1 and its potential coil across line 1 and 2. If the potential
coil of the wattmeter is transferred to lines 2 and 3, the reading of the wattmeteris the same. Calculate
the power factor of the motor.

A. 0.766

B. 0.829

C. 0.866

D. 0.707

386. Two wattmeters used to measure the total power drawn by a three-phase circuit and are
connected properly. The first wattmeter reads 4800 watts while the other reads 400 watts after
reversing its current coil. Solve for the load power factor.

A. 0.564

B. 0.532

C. 0.646

D. 0.439

387. Two wattmeter method is used to test a 25 HP, 230-volt, 1800 rpm, 60 cycle, 3-phase induction
motor. When the line voltages are 230 volts, one wattmeter needs +13,400 watts and the other +7,400
watts. Determine motor power factor.

A. 0.961

B. 0.886
C. 0.894

D. 0.807

388. A wound rotor motor, 7.5 HP, 230 volts, 3-phase takes a line current of 18.4 amperes, when
operating at rated output at an efficiency of 88%. Calculate the indication on the wattmeter when this is
inserted to measure power by the T-method.

A. 3.179 kW

B. 4.401 kW

C. 3.361 kW

D. 4.042 Kw

389. A wattmeter with its current coil in line 2 and potential coil across lines 2 and 3 is connected to a
balanced 3-phase system. The only load supplied is a single phase one connected to lines 1 and 2. This
load is known to be inductive. If the wattmeter reads zero watts, determine the power factor of the
single-phase load.

A. 0.707

B. 0.866

C. 0.800

D. 0.900

390. Three unequal single-phase motor loads are connected across the lines of a balanced 230 V, 60 Hz,
three-phase system. Motor #1 is connected across lines 1 & 2 and draws 106 A at 80% pf. Motor #2 is
connected across lines 2 & 3 and takes 142 A 86.6% pf. And motor #3 is connected across the lines 3 & 1
takes 164 A at 75% pf. Using two wattmeters properly connected with the common potential points in
line 2, what are the readings of these instruments?

A. 62.42 kW, 13.66 kW

B. 50.71 kW, 25.37 kW

C. 48.21 kW, 27.87 kW

D. 46.25 kW, 29.83 kW

391. A balanced 3-phase load draws 75 amperes line current at 230 volts line to line, and 0.848 lagging
power factor. If the two-wattmeter method is used, solve for the readings of the wattmeters,

A. 15.32 kW, 10.02 kW

B. 17.86 kW, 7.48 kW

C. 16.42 kW, 8.92 kW

D. 17.24 kW, 8.10 kW

392. Three equal impedances, each having a resistance of 8 ohms and an inductive reactance of 7 ohms
are connected in delta to lines a, b and c of a 240 V, 3-phase, 3-wire line, phase sequence: a-b-c. What is
the reading of a single-phase wattmeter connected with its current coil in line a and potential coil across
lines b and c?

A. 6,180 W

B. 6,324 W

C. 6,561 W

D. 6.004 W

393. A balanced three-phase load draws 20 kW at 0.447-pf lagging from 230-V, 60 Hz three- phase
transmission line. Find the readings of the two wattmeters properly connected to measure power.

A. 18.45 kW, 1.55 kW

B. 14.25 kW, 5.75 kW

C. 21.55 kW, -1.55 kW

D. 25.75 kW, -5.75 kW

394. Determine the operating power factor of a three-phase balanced load of the readings of the two
wattmeters properly connected to measure power 3:1

A. 0.667

B. 0.655

C. 0.756

D. 0.681

395. A 3-phase feeder carries two lagging balanced loads. The power observed by each is
measured by two wattmeters method, giving the following readings:

First load: W1 = 160 kW W2 = 96 kW

Second load: W1 = 90 kW W2 = 48 kW

What is the combined kVA load on the feeder?A.

434.68

B. 462.35

C. 504.24

D. 420.12

396. A single-phase wattmeter is used to determine the power taken by a three-phase squirrel cage
induction motor. The current coil is placed in line 1 while the potential coil is shifted from lines 1 and 2,
then lines 1 and 3 respectively. If the wattmeter registers 5760 and 3380 watts respectively, what is the
line current drawn by the motor. Line to line voltage is 230 V.
A. 25.17 A

B. 23.46 A

C. 34.61 A

D. 36.83 A

397. National Power Corporation used to wattmeters to measure 3-phase power of a balanced Y-
connected lagging power factor motor loads. Each wattmeter indicates 15.4 kW. The voltage coils are
connected across line 2 and 3, and across lines 1 and 3, respectively. The line-to-line voltages are 230
volts with V12 and V23 and the line currents are each 120 A. Calculate the total power supplied.

A. 37.44 kW

B. 30.72 kW

C. 39.67 kW

D. 34.88 Kw

398. A 3-phase, 600 V balanced system supplies energy to an unbalanced delta connected load. The
three line currents Ia, Ib and Ic are 141.4 A, 100 A and 100 A respectively. A wattmeter with its current coil
in line a and potential coil across a and b indicates 84.84 kW. Solve for the total power drawn by the
load. Assume a sequence of a-b-c.

A. 102.45 kW

B. 100.37 kW

C. 107.25 kW

D. 110.12 kW

399. Three equal non-inductive resistances are connected in star across a balanced 400 V, 60 Hz system.
A single-phase wattmeter is connected on the system with its current coil in line 1 and potential coil in
lines 1 and 3. This wattmeter registers 900 W. If line 2 is accidentally open circuited, what will be the
wattmeter reading under this condition?

A. 900 W

B. 1200 W

C. 600 W

D. 300 W

400. A balanced three-phase load having a resistance of 10 ohms and a reactance of 10 ohms are
connected in star across the lines of a balanced 230 V three-phase supply. Find the reading on each two
wattmeters properly connected to measure the power drawn.

A. 2055 W, 589 W

B. 2085 W, 559 W
C. 2165 W, 479 W

D. 2105 W, 539 W
Problem 401.

An unbalanced delta-connected load is connected across the lines of a 4-wire balanced

three-phase supply with neutral connection. Two wattmeters W 1, W2 are connected in lines 1 and 3
with the common potential connection in the neutral wire. These wattmeters read 1796.5 and 3000
watts, respectively. The current lines 1 and 3 are 20 and 25 A, respectively. If the common potential
connection is transferred to line 2, what will be the reading of the two wattmeters? The system
voltage per phase is 208V. Assume a phase sequence of 1-2-3 with V1n as reference.

A. W1 = 4013 watts, W2 = 4560 watts

B. W1 = 4043 watts, W2 = 4530 watts

C. W1 = 4063 watts, W2 = 4510 watts

D. W1 = 4073 watts, W2 = 4500 watts

Problem 402.

Two wattmeters are used to measure the total power drawn by a balanced delta connected
load. If the wattmeters read 1200W and 800W respectively, and the line-to-line voltage is 208V,
solve for the impedance per phase of the load.

A. 56.31 + j 23.67 ohms

B. 57.94 + j 20.07 ohms

C. 50.31 + j 31.72 ohms

D. 52.47 + j 23.82 ohms

Problem 403.

Two wattmeters used to measure the total power drawn by a three-phase circuit and are
connected properly. One of the wattmeters read 10kW when the power factor of the load is unity.
What does each wattmeter read when the power factor falls to 0.866 lagging? Assume the total
three-phase power remains the same.

A. 12.45kW, 7.55kW

B. 13.33kW, 6.67kW

C. 15.25kW, 4.75kW

D. 10.67kW, 9.33kW

Problem 404.

A factory is supplied by a three-phase, 3-wire system with the following characteristics.

Determine the average power factor of the load.

Vab = 230 0⁰V Ia = 110 -36.87⁰A

 Vbc = 230 240⁰V Ic = 125 53.13⁰A

A. 0.934 lagging

B. 0.908 lagging

C. 0.892 lagging

D. 0.866 lagging

Problem 405.

A 3-phase, 3-wire load draws the following line currents:

Ia = 60 330⁰A Ib = 78.4 214⁰A Ic = 75 80⁰A

If the voltages impressed on the load are balanced 3-phase, having magnitude of 4140 volts
line to line, solve for the power factor of the load.

A. 0.976

B. 0.999

C. 0.982

D. 0.906
 Electrical Transients

Transient Period

When a circuit is to be switch-on it, it will not directly attain its steady state response but
instead passes through a transition period wherein the currents or voltages adjust themselves to
their steady state response. This transition period is called the transient period.

Example: A graph of the current growth in each RL dc circuit.

RL Series DC Circuit

Note: “k” is an arbitrary constant whose value is found by substituting the initial conditions of the
circuit.

If the initial value of the current (t = 0) in the circuit is zero, k = - E/R

where: i = instantaneous current (ampere)

E = supply voltage (volt)

R = resistance of the resistor (ohm)

L = inductance of the coil (henry)

t = time (second)

 Time constant (TC) – time when the exponent of “e” in the formula for current is unity or equal
to 1.

where: R = resistance (ohm)

L = inductance (henry)
 t = time (second)

 Instantaneous voltage drops (volt):

where: ER = voltage drop across the resistor

EL = voltage drop across the inductor

 Instantaneous powers (watt):

where: PR = power dissipated by the resistor

PL = power dissipated by the inductor

Pt = total power dissipated in the circuit

RC Series DC Circuit

Note: “k” is arbitrary constant whose value is found by substituting the initial conditions of the
circuit.

 Instantaneous currents (ampere):

 Capacitor has no initial charge:

 Capacitor has an initial charge of Q0:

where: + (sign) = if capacitor is discharging

- (sign) = if capacitor is charging

i = instantaneous current (ampere)

E = supply voltage
 R = resistance of the resistor (ohm)

C = capacitance of the capacitor (farad)

Q0 = initial charge of the capacitor (coulomb)

 Time constant (TC) – time when the exponent of “e” in the formula for current is unity or equal
to 1.

TC = RC

where: R = resistance (ohm)

C = capacitance (farad)

t = time (second)

 Instantaneous voltage drops: (with Q0 = 0)

where: ER = voltage across the resistor (volt)

EC = voltage across the capacitor (volt)

 Instantaneous powers (watt):

where: PR = power dissipated by the resistor

PC = power dissipated by the capacitor

Pt = total power dissipated in the circuit

 Instantaneous charge (coulomb) on the capacitor:

 Capacitor has no initial charge:
 Capacitor has an initial charge of Q0 =

RLC Series DC Circuit

 Overdamped case – when the roots of the auxiliary equation are real and distinct.

where: m1 and m2 are the roots of the auxiliary equation

 Critically damped case – when the roots of the auxiliary equation are repeated.

where: m is the repeated root

 Underdamped case – when the roots of the auxiliary equation contain a real and an imaginary
part.

Note: C1 and C2 can be obtained using the initial conditions of the circuits.

General equation of the rate of change of the current: (At t = 0, i = 0)

where: Q0 = initial charge stored in the capacitor

+ Q0 = if discharging

- Q0 = if charging

RL Series AC Circuit

RC Series AC Circuit
RLC Series AC Circuit

 Overdamped case – when the roots of the auxiliary equation are real and distinct.

where: m1 and m2 are the roots of the auxiliary equation

 Critically damped case – when the roots of the auxiliary equation are repeated.

where: m is the repeated root

 Underdamped case – when the roots of the auxiliary equation contain a real and an imaginary
part.

Note: To solve for the values of C1, C2, m, m1, m2, , , refer to RLC series DC transients.

General equation of the rate of change of the current: (At t = 0, i = 0)

where: Q0 = initial charge stored in the capacitor

+ Q0 = if discharging

- Q0 = if charging

Transient Analysis by Laplace Transform Method

Laplace transform is a powerful mathematical tool in solving simultaneous linear differential

equations formulated using Kirchhoff’s laws in each electric circuit. This method simply eliminates
the effort of determining the values of the constants for integration.

Steps used in circuit analysis using Laplace transform:

 Formulate necessary equations using function of “t”.
 Transform the formulated equations (function of “t”) to functions of “s”.
 Simply the equations transformed and re-write the simplified equation to the standard formulas
in inverse Laplace functions.
 Obtain the inverse Laplace function of each term in the simplified equation and solve the
question asked by the problem.

Laplace Transform Formulas Applicable to Electric Circuit Analysis

Problem 406.

In an RL circuit, Kirchhoff’s Law gives the following relation: E = L di/dt + Ri

where: E = supply voltage (200 volts)

R = resistance (20 ohms)

L = inductance (1 henry)

t = time in seconds

i = current in amperes

If i = 0 when t = 0, find i when t = 0.02 second.

A. 3.3A

B. 3.1A

C. 3.2A

D. 3.0A
Problem 407.

In an RL circuit, Kirchhoff’s Law gives the following relation: E = L di/dt + Ri

where: E = supply voltage (200 volts)

R = resistance (20 ohms)

L = inductance (1 henry)

t = time in seconds

i = current in amperes

If i = 0 when t = 0, find i after a long time.

A. 10A

B. 11.2A

C. 0A

D. infinite

Problem 408.

A 6.0H coil whose resistance is 12 ohms is connected in series with a 24 ohms resistor and to
a 144V battery and a switch. The switch is closed at t = 0. Determine the time constant of the circuit.

A. 0.36 sec

B. 0.45 sec

C. 0.66 sec

D. 0.50 sec

Problem 409.

The current in a coil decays as follows: when t = 0.002 sec, the current is 10mA; when t =
0.006 s, the current drops to 4mA. The time constant of the coil is _____.

A. 4.50 ms

B. 3.28 ms

C. 4.36 ms

D. 2.15 ms

Problem 410.
 A time of 10 milliseconds is required for the current on a series RL dc circuit to reach 90% if
its finals steady state value. Assume t = 0, i(0) = 0. What is the time constant in seconds for the
circuit?

A. 4.25 ms

B. 3.86 ms

C. 3.39 ms

D. 4.34 ms

Problem 411.

A coil has a resistance of 10 ohms and a time constant of 1 second. If the coil is connected
across a steady potential of 24V, how much is the current after 2 ms?

A. 4.07 mA

B. 4.79 mA

C. 4.91 mA

D. 4.04 mA

Problem 412.

The shunt winding of a machine has a resistance of 80 ohms and an inductance of 4H is

suddenly switched on to a 220V supply. Find the time taken for the current to rise to half its steady
state value.

A. 0.05 sec

B. 0.0346 sec

C. 0.0251 sec

D. 0.0172 sec

Problem 413.

A dc voltage E is supplied across an RL circuit at t = 0. At what time after is the voltage across
the resistor equal to that across the inductor?

A. 0.693 TC

B. 0.673 TC

C. 0.707 TC

D. 0.779 TC
Problem 414.

A 500-ohm relay coil has an inductance of 10mH. This relay requires a current of
40mA to trigger. How long after the switch is closed will the relay trigger if a 24V DC source is
applied across its terminals. Assume at t = 0, i = 0.

A. 23.54 sec

B. 30.36 sec

C. 35.83 sec

D. 37.22 sec

Problem 415.

A 6.0H coil whose resistance is 12 ohms is connected in series with a 24 ohms resistor and to
a 144V battery and a switch. The switch is closed at t = 0. Determine the current at t = 0.1 second.

A. 1.538 A

B. 1.750 A

C. 1.805 A

D. 1.624 A

Problem 416.

A coil having a resistance of 10 Ω and inductance of 10H is connected in series with a 15 Ω

resistor. A 200-V DC source is connected to the circuit at t = 0. Determine the voltage across the coil
at t = 0.05 sec.

A. 190.86 V

B. 188.51 V

C. 178.62 V

D. 185.90 V

Problem 417.

A series RL circuit is connected across a dc source through a switch. Three (3) milliseconds
after the switch are closed, the voltage across the inductance is 20V and drops to 5V after 20 ms. If R
= 100 ohms, find L.. Assume at t = 0, I =0.

A. 1.30 H

B. 1.22 H
 C. 1.59 H

D. 1.25 H

Problem 418.

A 1Ω resistor is connected in series with a 2-mH inductor. If a 12-V dc source is suddenly

connected across its terminals, how long will it take, such that the voltage across the resistor will be
twice as that of the inductor.

A. 2.5 ms

B. 1.7 ms

C. 2.2 ms

D. 1.9 ms

Problem 419.

A resistance of 100 kΩ is connected is series with a 100 F capacitor. If the combination is

suddenly connected across a 125V DC source, determine the current one second after the switch is
closed.

A. 1.13 mA

B. 1.25 mA

C. 1.05 mA

D. 1.12 mA

Problem 420.

An unchanged condenser is series with a 120-volt voltmeter of 10,000 ohms resistance is

suddenly connected to a 100 V battery. One second later, the voltmeter reads 60 volts. Determine
the capacitance of the condenser.

A. 187.54 F

B. 190.62 F

C. 195.76 F

D. 192.23 F

Problem 421.

A 120 F capacitor has an initial charge of 600 C. It is discharged through a 40 Ω resistor.

How long will it take for the capacitor to discharge to 150 C.
 A. 6.65 ms

B. 6.82 ms

C. 4.66 ms

D. 5.85 ms

Problem 422.

A 50 F capacitor is connected across a 400V dc source. It is then discharged through a

voltmeter whose resistance is 100-kΩ. How long will it take for the capacitor to discharge to 1.8 J of
stored energy?

A. 2.3 s

B. 1.9 s

C. 2.0 s

D. 1.6 s

Problem 423.

A 20-ohm resistance R and a 0.001 farad capacitance C are in series. A direct current voltage
E of 100 volts is applied across the series circuit at t = 0 and the initial current i(0) = 5 A. The
applicable differential equation is:

Solve for the differential equation and determine the resulting current i(t) at t = 0.001 second.

A. 3.34 A

B. 3.67 A

C. 2.78 A

D. 3.03 A

Problem 424.

A series RC circuit consist if R = 2 MΩ and an uncharged capacitor C = 5 F. The circuit is

connected across a 100 VDC source at t = 0. Determine the voltage across the resistor 5 seconds
later.

A. 63.31 A

B. 60.65 A

C. 66.24 A
 D. 69.22 A

Problem 425.

An uncharged condenser in series with a 120-volt voltmeter of 10,000 ohms resistance is

suddenly connected to a 100V battery. One second later, the voltmeter reads 60 volts. Determine
the rate at which the voltage across the condenser is charging.

A. 51

B. 51

C. 55

D. 55

Problem 426.

In a circuit consisting of a resistance, R ohms, in series with a capacitance, C farad, and

connected to a DC source with emf E volts, the electrical charge, Q coulombs and the current i,
amperes, maybe determined by solving the simultaneous equations:

If R = 20 ohms, C = 250 × 10-6 farad and E = 100 volta, find i after a long time.

A. 1 A

B. 0 A

C. infinity

D. 5 A

Problem 427.

An 80 F capacitor in series with a voltmeter of 10,000-ohm resistance is connected

suddenly across a 100-V supply. How long will it take for the voltmeter to register 5 V?

A. 1.84 sec

B. 1.52 sec

C. 1.63 sec

D. 1.24 sec

Problem 428.
 A 100 F capacitor initially charged to 24 V is discharged across a series combination of a 1
kΩ resistor and a 200 F capacitor. Find the current after 1 sec.

A. 7.34 nA

B. 7.24 nA

C. 8.43 nA

D. 8.84 nA

Problem 429.

An 80 F capacitor in a series with a 1000-ohm resistor is connected suddenly across a 110 V

DC supply. Find the value of the current after one time constant.

A. 0.0405 A

B. 0.0652 A

C. 0.0543 A

D. 0.0322 A

Problem 430.

A series RC circuit consist of R = 2 MΩ and an uncharged capacitor C = 5 F. The circuit is

connected across a 100 VDC source at t = 0. What is the initial rate of change of voltage across the
resistor?

A. – 10.0 V/s

B. 10.0 V/s

C. -12.4 V/s

D. None of these

Problem 431.

A series RLC circuit with R = 1 kΩ, L = 1 H and C = 6.25 F is suddenly connected across a 24 V
dc source. At t = 0, i = 0, and q = 0. Determine the current after 0.01 sec.

A. 3.45 mA

B. 4.61 mA

C. 5.40 mA

D. 5.05 mA
Problem 432.

A series RLC circuit has R = 200 Ω, L = 0.1 H and a capacitor C = 10 F. If a 100 V dc source is
connected across the end terminals of the series circuit at t = 0, determine the current after 1
millisecond. Assume zero initial conditions.

A. 0.353 A

B. 0.229 A

C. 0.253 A

D. 0.368 A

Problem 433.

A series RLC circuit has R = 40 ohms, L = 100 mH and C = 50 F. The circuit is connected
across a 100 V dc source at t = 0 through a switch. Determine the current 0.02 second after the
switch is closed. Assume all initial condition to be zero.

A. 6.40 mA

B. 5.31 mA

C. 6.22 mA

D. 4.85 mA

Problem 434.

A 10-ohm resistance R and a 1.0-henry inductance L are connected in series. An AC voltage

e(t) = 100 sin 377t is applied across the series circuit. The applicable differential equation is:

Solve for the solution (without the complimentary solution) and determine the amplitude of the
resulting sinusoidal current i(t).

A. 0.321 A

B. 0.292 A

C. 0.241 A

D. 0.265 A

Problem 435.

A certain electric welder has a basic circuit equivalent to a series RL with R = 0.1 Ω and L = 1
mH. It is connected to an AC source “e” through a switch “s” operated by an automatic timer, which
closes the circuit at any desired point on the 60 cycle, sinusoidal wave “e”. Calculate the magnitude
of the transient current resulting when “s” closes as “e” is passing through its peak value of 100
volts.

A. 256.41 A

B. 65.74 A

C. 80.54 A

D. 76.32 A

Problem 436.

Given the differential equation:

Where L = 0.1 henry, R = 10 ohms and i(0) = 0. Determine the current at t = 0.01 second.

A. 2.784

B. 2.301

C. 2.531

D. 3.062

Problem 437.

A series RC circuit with R = 30 ohms and C = 250 F is connected across an AC voltage source
of emf 100 sin 100t through a switch. The switch is closed at t = 0. Determine the current when t =
0.01 second. Assume at t = 0, voltage across the capacitor is zero.

A. 1.45 A

B. 1.24 A

C. 0.93 A

D. 2.05 A

Problem 438.

A series circuit has R = 10 ohms, L = 0.1 henry, and C = 0.0001 farad. An AC voltage e = 100
sin 377t is applied across the series circuit and the applicable differential equation is:

Solve for the solution (without the complimentary solution) and determine the amplitude of the
resulting sinusoidal current i(t).
 A. 5.51 A

B. 6.06 A

C. 6.67 A

D. 7.34 A

Problem 439.

A 10-ohm resistance R and a 0.001 farad capacitance C are in series. An AC voltage e = 100
sin 377t is applied across the series circuit. The applicable differential equation is:

Solve for the solution (without the complimentary solution) and determine the amplitude of the
resulting sinusoidal current i(t).

A. 9.67 A

B. 10.63 A

C. 8.79 A

D. 11.70 A

Problem 440.

A series RL circuit has a R = 10 ohms and L = 1 henry. The circuit is connected across a
voltage source e(t) = 10e-10t through a switch that is initially open. The switch is closed at t = 0.
Determine the current after 0.01 second. Assume initial current to be zero.

A. 86.8 mA

B. 90.5 mA

C. 89.3 mA

D. 92.2 mA

Problem 441.

The differential equation of a series RC circuit with DC applied voltage is:

If R = 50 ohms, C = 0.0001 farad, E = 100 volts and i(0) = 2.0 amperes, determine the Laplace
transform expression for I(s).

A.
 B.

C.

D.

Problem 442.

A series RC circuit has R = 1 kΩ and C = 100 F with an initial charge of 2000 C. The
combination is connected across a 100 V dc source and the switch is closed at t = 0. If the capacitor is
connected in the circuit such that it will be discharging, determine the Laplace transform expression
of the current drawn.

A.

B.

C.

D.

Problem 443.

Determine the inverse Laplace transform of

A.

B.

C.

D.

Instruments and Measurements

Ammeter

 Ammeter shunt (shunt resistance) – used to increase the range of an ammeter.

where: I = maximum current that the meter can measure (ampere)

 Ifs = full scale current of the meter (current flowing in the galvanometer coil)

Ish = current flowing in the shunt resistance (ampere)

Rg = resistance of the galvanometer coil (ohm)

Rsh = shunt resistance (ohm)

Voltmeter

 Potential divider (series resistance) – used to increase the range of a voltmeter.

where: Efs = maximum voltage (full-scale) that the meter can measure (volt)

Eg = voltage across the galvanometer coil (volt)

Ig = current flowing in the galvanometer coil (ampere)

Rg = resistance of the galvanometer coil (ohm)

Rse = series (potential divider) resistance (ohm)

Note: Meter sensitivity (1/Ifs) has a unit ohm per volt.

Ohmmeter

where: RL = current limiting resistor

Rv = resistance used to bring the pointer to the zero reading when R x = 0

Rx = resistance to be measured

Rg = resistance of the galvanometer coil

E = supply voltage of the meter

 Imax = galvanometer current when Rx is zero

Watt-Hour Meter

W = kN W = Pt

where: W = reading of the watt-hour meter (watt-hour)

P = power drawn (watt)

t = time of usage

N = number of revolutions made by the disk

k = proportionally constant (meter constant)

Wattmeter Reading Using a “PT” and a “CT”

Pactual = Wreading × Multiplier Multiplier = CT ratio × PT ratio

where: Pactual = actual power consumption (watt)

Wreading = wattmeter reading (watt)

CT ratio = current ratio of the current transformer

PT ratio = voltage ratio of the potential transformer

Resistance Measurement Using a Voltmeter and an Ammeter

where: Rx = unknown resistance (ohm)

V = voltmeter reading (volt)

I = ammeter reading (ampere)

Insulation Resistance of Cables

where: R = resistance of the cable (ohm)

Rv = resistance of the voltmeter (ohm)

E = supply voltage (volt)

= voltmeter reading at position #1

Ev = voltmeter reading at position #2

Wheatstone Bridge

It is used to determine the ohmic value of an unknown resistance.

Note: Resistor R is adjusted, until the bridge is balanced (galvanometer reading is zero).

where: Rx = unknown resistance (ohm)

R = called the balanced or rheostat arm (ohm)

R1/R2 = called the ratio arms

Slide-Wire Bridge

Slide wire rings is a simplified Wheatstone bridge.

Note: The movable terminal of the galvanometer is transferred within the wire until the bridge is
balanced (galvanometer reading is zero).

where: s = distance in unit length (based on the 100-scale)

Rx = unknown resistance (ohm)

Varley Loop Test

This is used to locate accidental ground point in cables.

Note: At position #1, resistors A, B, and C are adjusted until the galvanometer reading is zero.

where: R = total resistance of the cable (both lengths connected in series)

r = resistance per unit length of the cable

D = length of the transmission line

Note: At position #2, resistors A, B, and C are adjusted until the galvanometer reading is zero.

where: d = distance of the fault point

Note: A, B, and C might not be equal when the switch is at position #1 and at position #2.

Murray Loop Test

This is used to locate faults with very low resistance loop.

Note: Resistor B is adjusted, until the galvanometer reading is zero.

Slide-Wire Murray Loop Test

Note: The movable terminal of the battery is transferred within the wire until the bridge is balanced
(galvanometer reading is zero).

Problem 444.
 A DC ammeter has an internal resistance of 0.1 ohm. A shunt of 1.010×10 -3 ohm is
connected to the ammeter. What is the multiplier of the set up?

A. 80

B. 100

C. 50

D. 10

Problem 445.

A 1% d’Arsonval meter movement has coil and swamping resistance adding to 200 ohms.
The full-scale voltage is 50mV. Determine the shunt resistance required producing a 1 A full scale
current meter?

A. 52.02 mΩ

B. 49.22 mΩ

C. 50.01 mΩ

D. 48.74 mΩ

Problem 446.

A galvanometer with a 20-ohm coil resistance has a full-scale deflection current of 10 mA. If
a 0.02 ohm is placed across the meter to increase its capacity, what is the approximate new full-scale
current of the meter?

A. 10.10 A

B. 11.01 A

C. 10.11 A

D. 10.01 A

Problem 447.

A moving iron meter gives full-scale deflection with 100 V applied across the coil. The coil
has 20,000 turns and a resistance of 2.5kΩ. If this instrument is to be used as an ammeter with a full-
scale deflection of 10 A, how many turns are needed?

A. 80

B. 100

C. 50

D. 70
Problem 448.

A moving iron ammeter is wound with 50 turns and gives full-scale deflection with 4 A. If it is
desired to extend the full-scale reading to 10 A, how many turns are needed on the same bobbin?

A. 40

B. 20

C. 10

D. 30

Problem 449.

A galvanometer has a coil resistance of 50 ohms and a current sensitivity of 0.001 A per
mm. How much is the voltage across its terminals when the deflection is 15cm at full scale?

A. 7.50 A

B. 10.0 A

C. 8.25 A

D. 9.05 A

Problem 450.

A 0-10 mA galvanometer with a coil resistance of 20 ohms is converted to a 0-50 V voltmeter

by using

A. 50 ohms shunt resistor

B. 4980 ohms series resistor

C. 5000 ohms series resistor

D. 5020 ohms series resistor

Problem 451.

A certain 50 A meter movement has a resistance of 90 ohms. What value of series

multiplier is needed to make the instrument to read 5 V (maximum).

A. 102 kΩ

B. 99.91 kΩ

C. 110 kΩ

D. 98 kΩ
Problem 452.

A voltmeter with an internal resistance of 5000 ohms is calibrated to read 10 volts at full
scale. How much series resistance is needed in order to measure 150 volts at full scale?

A. 70 kΩ

B. 75 kΩ

C. 72 kΩ

D. 78 kΩ

Problem 453.

A 1000 ohms per volt, 2%-meter movement has a coil resistance of 200 ohms. Determine
the external resistance necessary to provide a full-scale reading of 5 V.

A. 4.5 kΩ

B. 5.2 kΩ

C. 5.0 kΩ

D. 4.8 kΩ

Problem 454.

An ammeter rated 5 A, having a resistance of 0.5 Ω, is to be converted into a 200 V

voltmeter by connecting a resistor in series with the ammeter. Calculate the values of the resistance.

A. 37.4 Ω

B. 34.6 Ω

C. 39.5 Ω

D. 35.5 Ω

Problem 455.

A direct current wattmeter with a potential coil connected across the load side of the
instrument reads 250 W. If the voltage across the load is rated at 230 V, what is the actual power
drawn by the load. The resistance of the potential coil is known to be 1 kΩ.

A. 194.2 W

B. 197.1 W

C. 193.5 W

D. 189.6 W
Problem 456.

The stator of a 440 V, 50 hp shunt motor is tested at 75⁰C for its insulation resistance
between terminals connected and the ground frame. When a 50,000-ohm voltmeter is connected in
series with a 600 V DC source and the insulation resistance, the meter indicates 125 V. Calculate the
insulation resistance.

A. 170 kΩ

B. 190 kΩ

C. 180 kΩ

D. 200 kΩ

Problem 457.

It is desired to measure the resistance of the insulation between the motor winding and the
motor frame. A 300 V, 50,000-ohm voltmeter is used in making the measurements. The voltmeter
when connected across the source reads 230 V and when connected in series with the insulation, it
reads 5 V. Find the insulation resistance.

A. 2.42 MΩ

B. 2.25 MΩ

C. 2.96 MΩ

D. 2.35 MΩ

Problem 458.

When a 150 kΩ voltmeter is connected across a constant source, it registers 230 V. When
one terminal is connected to the core of a cable while the rubber insulation of the cable is connected
to the other terminal of the line, the meter registers 15 V. Determine the insulation resistance of the
cable.

A. 2150 kΩ

B. 2000 kΩ

C. 2202 kΩ

D. 2480 kΩ

Problem 459.

An unknown voltage is to be measured by means of a 250 V scale voltmeter having an

internal resistance of 10,000 ohms. For safety purposes a 1000 ohms resistor is connected in series
with one of the voltmeter terminals. If the meter reads 200 volts, determine the unknown voltage.
 A. 250 V

B. 220 V

C. 230 V

D. 300 V

Problem 460.

Two identical 1000 ohm per volt DC voltmeter are connected in series to measure an
unknown supply voltage. The first voltmeter is connected to its 200 V scale while the second
voltmeter is connected to its 250 V scale. What is the voltage of the supply if the first voltmeter
reads 100 V.

A. 225 V

B. 220 V

C. 230 V

D. 242 V

Problem 461.

A 20 kΩ per volt voltmeter indicated a reading of 250 V on its 300 V scale when used to
measure an unknown voltage. If a 50 kΩ resistor was connected in series with the instrument during
the test, determine the value of the unknown voltage.

A. 238 V

B. 245 V

C. 248 V

D. 225 V

Problem 462.

A 300 V voltmeter draws 2 mA current for full-scale deflection. This voltmeter is used to
measure the voltage across a 50 kΩ resistor in series with a 25 kΩ resistor. The combination of the
resistors is being connected across a 150 V source. What is the voltmeter reading?

A. 98 V

B. 102 V

C. 90 V

D. 88 V

Problem 463.
 The Meralco test of a 10 A wattmeter having a constant of 0.4, the disk makes 40 revolutions
in 53.6 seconds. The average volts and amperes during this period of test are 116 volts and 9.4 A.
What is the percent accuracy of the meter at this load?

A. 97.45%

B. 98.58%

C. 98.07%

D. 96.44%

Problem 464.

In a test of 10 ampere wattmeter having a constant of 0.40, the disk makes 40 revolutions in
55 seconds. The average volts and amperes during this period are 116 volts and 10 amps. Determine
the percent accuracy of this meter at this load.

A. 92.34%

B. 91.03%

C. 83.46%

D. 90.28%

Problem 465.

A given ampere-hour meter is under test by connecting it across a 230 V DC source. For a
duration of 180 minutes, a constant current of 20 A flows. This meter registers 570.5 and 582.3 kW-
hr before and after the test, respectively. Calculate the percentage accuracy of the meter.

A. 92.31%

B. 90.02%

C. 91.44%

D. 89.20%

Problem 466.

A 15 A, 120 V watthour meter has a disk constant of 2. When tested on a unity power factor
load, 24 disk revolutions are counted in a period of 2 minutes. How many disk revolutions would be
counter per minute if the power factor were changed to 0.5 lagging? Assume the same line current
and voltage in both conditions.

A. 6

B. 10

C. 8
 D. 12

Problem 467.

A single phase three wire, 60 Hz, 220 V, watthour-meter has a disc constant of 1.2.
Determine the energy recorded by the meter after 18,000 revolutions of the disc.

A. 21.6 kW-hr

B. 20.5 kW-hr

C. 25.4 kW-hr

D. 27.6 kW-hr

Problem 468.

A 115 V, 10 A, three phase watt-hour meter, having a basic meter constant of k = 2/3 is
connected to a three phase, three- wire circuit through a 100:5 ampere CT and 2300:115 volt PT. A
time check shows that the meter disk is making 15 revolutions in 50 seconds. What is actual kW of
the load?

A. 720 kW

B. 288 kW

C. 524 kW

D. 380 kW

Problem 469.

A power plant customer draws power at 220 volts from transformers on a pole. Current
transformers with ratio of 200/5 are used to meter the electrical usage. What is the multiplier of the
kW-hr and demand meters?

A. 40

B. 200

C. 100

D. 80

Problem 470.

A current transformer with a turns ratio of 100:5 and a potential transformers with a turns
ratio of 10:1 are connected to the current and voltage coils of a single-phase wattmeter measuring
power delivered to a load. If the wattmeter reading is 240 W, what is the actual power measured
delivered to the load?
 A. 50,000 watts

B. 42,000 watts

C. 48,000 watts

D. 45,000 watts

Problem 471.

At a 115 kV substation, the PT ratio is 1000 and the CT ratio is 1200/5. The potential going to
the wattmeter is 115 volts. What is MW indicated when the wattmeter reads 800 watts?

A. 192 MW

B. 15.0 MW

C. 19.2 MW

D. 150 MW

Problem 472.

A 15 A, 120 V watt-hour meter has a disk constant of 2. When tested on a 0.8 power factor
load, 24 disk revolutions are counted in a period of 3 minutes. Calculate the current drawn by the
load.

A. 10 A

B. 8 A

C. 6 A

D. 12 A

Problem 473.

In each test, it was found out that with a current of 40 A, the disk of a given ampere-hour
meter made 160 revolutions in 4 minutes. If the meter constant of the instrument is 50 coulumbs
per revolution, determine the multiplying factor to be used in order to give the correct energy
consumption of the load.

A. 0.833

B. 0.707

C. 0.922

D. 0.866

Problem 474.
 An unknown resistor Rx as shown is to be measured by means of a Wheatstone bridge, when
the ratio arms are arranged R1 = 10 ohms and R2 = 1200 ohms, balance is obtained when rheostat
arm is equal to 1256 ohms, what is the value of the unknown resistor?

A. 10.47 Ω

B. 11.24 Ω

C. 13.22 Ω

D. 14.05 Ω

Problem 475.

An unknown resistance x as shown is measured by a slide wire bridge (a simple form of

Wheatstone bridge) AC is a uniform wire 100 cm long and D is a sliding contact. Balanced is obtained
when AD equals 32.5 cm. Find the value of the unknown resistance x.

A. 45.32 Ω

B. 48.14 Ω

C. 50.04 Ω
 D. 43.44 Ω

Problem 476.

A two-conductor underground scale cable 2800 ft long is used to interconnect a home base
station to another station. One conductor is grounded at some point. A Murray loop test was
conducted at the home base with a 100 cm slide wire bridge. If a balance on the bridge was obtained
at 76 cm, at what distance is the fault from the home base?

A. 1287 ft

B. 1415 ft

C. 1344 ft

D. 1302 ft
 DC Generators

Types of Armature Windings

 Lap winding – it forms a loop as it expands around the armature core.

where: Yb = back pitch (must be an odd number)

= the number of elements that the coil advances on the back of the armature core

Yf = front pitch (must be an odd number)

= the number of elements spanned on the commutator end of the armature

m = multiplicity factor

= 1, for simplex winding

= 2, for duplex winding …. Etc

+ (sign) = for progressive winding (winding expands from left to right)

- (sign) = for retrogressive winding (winding expands from right to left)

 Wave winding – it forms a wave as it expands around the armature core.

where: Y = average pitch (must be an integer)

Z = total number of winding elements on the surface of the armature core

P = number of poles

 Minimum number of elements or conductors per slot (if not specified):

Types of winding Elements per slot

Simplex 2

Duplex 4

Triplex 6

Quadruplex 8

 Total number of elements or conductors (Z):

 Z = (elements/slot) (total number of slots)

 Number of brushes (if not specified):

Nlap = mP Nwave = 2

 Number of commutator segments:

Nc = Z/2

 Number of armature current:

Alap = mP awave = 2m

 Coil pitch (Ys)

Ys = coil span in slots/slots per pole

Generated EMF Equation of a DC Generator

E = kNΦ

where: E = generated emf (volt)

P = number of poles

N = speed of armature core rotation (rpm)

Z = total number of elements or conductors

Φ = flux per pole (weber)

a = number of armature current paths

k = proportionally constant

Note: 1 weber = 1×108 maxwells or lines of flux

Types of DC Generators According to Excitation

 Separately-excited – the field windings of the generator is excited from separate source usually
a battery.

 Self-excited – the field windings of the generator is supplied or excited from its own generated
emf.
Shunt Generator

The armature coils and the shunt field coils are connected in parallel.

Series Generator

The armature coils and the series field coils are connected in series.

Long-Shunt Compound Generator

The series field coils are connected in series with the armature coils while the shunt field coils are
connected across the series combination.

Short-Shunt Compound Generator

The series field coils are connected in series with the load, while the shunt field coils are connected
in parallel with the armature coils.
where: Ra’ = armature equivalent resistance

Ra’ = Ra + Rip + Rcw

Ra = armature winding resistance (ohm)

Rip = interpole winding resistance (ohm)

Rcw = compensating winding resistance (ohm)

Rsh = shunt field winding resistance (ohm)

Rse = series field winding resistance (ohm)

Ia = armature current (ampere)

Ish = shunt field current (ampere)

Ise = series field current (ampere)

IL = load current (ampere)

E = generated emf in the armature (volt)

VL = terminal voltage or load voltage (volt)

PL = power delivered to the load (watt)

Pg = power developed or generated in the armature (watt)

Voltage Regulation

 Voltage Regulation – percentage rise in the terminal voltage of the generator when the
generator load is removed.

where: VNL = no-load terminal voltage

VFL = full load terminal voltage

Power Losses and Efficiency Pstray load 1% of the output for machines 150
kW and over
Plosses = Pa + Pb + Pcore + Pf + Pfw + Pstray load
Pb = IaVb
Pcore = Peddy + Physteresis
2 Pa = Ia2Ra
Peddy = ke(N mt) w
1.6
Pf = Ish2Rsh + Ise2Rse
Physteresis = khN m w

 Efficiency – ratio of output power (power drawn by load) to the input power (power generated by
the generator).

where: Pa = armature circuit loss

Pb = brush-contact loss

Vb = brush-contact drop

Pcore = core loss

Pf = field circuit loss (shunt field + series field)

Pfw = friction and windage loss

Pstray load = stray load loss

Pe = eddy current loss

Ph = hysteresis loss

ke & kh = proportionally constant

N = speed of armature rotation

m = maximum flux desity

t = thickness of armature core lamination

w = weight of core

= efficiency

PL = output power or power delivered to load

Plosses = power losses

 Maximum efficiency – occurs only when the constant or rotational losses are made equal to the
variable losses.
Where: Pk = constant losses

Note: In a DC generator the constant or fixed losses are the ff: friction & windage loss, core loss, brush
contact loss and the stray load losses while the variable losses are the ff: armature copper loss and the
field copper loss. Sometimes field copper losses are constant, dependent on the type of DC generator.
Also, unless otherwise specified, brush contact losses are assumed constant.

Operating Characteristic Triangle of a DC Generator

Note: Normally, as the dc generator load increases, the terminal voltage of the said generator decreases
(except on a series dc generator).

where: V = change in terminal or bus voltage due to change in load current ( I)

Parallel Operation of DC Generators

Requirements:

 The same external characteristics.

 Terminal polarity must be the same.
 Terminal voltage must be equal in magnitude.
 Case 1: With external characteristics given (kW rating, voltage rating, regulation, etc.)

Before bus load changes:

 Pa = VbusIa Pt = Pa + Pb I t = Ia + I b

Pb = VbusIb Pt = VbusIa

where: Ia and Ib = currents delivered by generators A and B respectively

Vbus = operating voltage prior to change in bus load

Pa and Pb = power shares of generators A and B respectively

After bus load changes:

I = Ia + Ib ItNEW = It I ItNEW = IaNEW + IbNEW

IaNEW = Ia Ia IbNEW = Ib Ib

where: I = change in bus load (current)

Ia and Ib = change in generator currents due to changes in bus load

+ I = if there is an increase in bus load

- I = if there is a decrease in bus load

VbusNEW = Vbus V

where: + V = if there is a decrease in bus load

- V = if there is an increase in bus load

PaNEW = VbusNEWIaNEW PtNEW = PaNEW + PbNEW

PbNEW = VbusNEWIbNEW PtNEW = VbusNEWItNEW

where: PaNEW, PbNEW = power shares of generators A and B respectively after the change in the bus load

VbusNEW = operating voltage after the change in the bus load

IaNEW, IbNEW = currents delivered by generators A and B respectively after the change in the bus
load

 Case II: With internal characteristics given (generated emf, resistances of windings, etc.)
Note: Use “Nodal Node Method” or the conventional method of solving generator problems using the
formulas discussed

Problem 477.

A four pole, DC generator with lap winding has 48 slots and 4 elements per slot. How many coils
does it have?

A. 48

B. 384

C. 192

D. 96

Problem 478.

If the armature of an eight-pole machine were wound with a simplex wave winding, how many
parallel paths would there be?

A. 16 paths

B. 8 paths

C. 2 paths

D. 4 paths

Problem 479.
 The armature of a four-pole shunt generator is lap wound and generates 216 volts when running
at 600 rpm. The armature has 144 slots, with six conductors per slot. If this armature is rewound, wave
connected, find the emf generated at the same speed and flux per pole.

A. 412 V

B. 427 V

C. 465 V

D. 432 V

Problem 480.

A two-pole DC generator has an armature containing a total of 40 conductors connected in two

parallel paths. The flux per pole is 6.48×10 8 lines and the speed of the prime mover is 30 rpm. The
resistance of each conductor is 0.01 ohm and the current carrying capacity of each conductor is 10 A.
Calculate the terminal voltage of the generator.

A. 127. 6 V

B. 125.2 V

C. 130.8 V

D. 128.4 V

Problem 481.

A four-pole DC generator has an armature winding containing a total of 648 conductors

connected in two parallel paths. If the flux per pole is 0.321×10 6 maxwell and the speed of rotation of
the armature is 1,800 rpm. Calculate the ampacity required in each armature conductor if the power
developed by the armature is 5 kW.

A. 40 A

B. 30 A

C. 20 A

D. 25 A

Problem 482.

A 4-pole DC generator with duplex lap winding has 48 slots and four elements per slot. The flux
per pole is 2.5×106 maxwells and it runs at 1500 rpm. What is the output voltage?

A. 60 V
 B. 360 V

C. 225 V

D. 120 V

Problem 483.

The armature of a 4-pole, 128 slots shunt generator is lap wound with four conductors per slot.
The flux per pole is 50 mWb. The armature and shunt field resistances are 0.04 ohm and 50 ohms,
respectively. Determine the speed of the machine when supplying 400 A at a terminal voltage of 250 V.

A. 615 rpm

B. 622 rpm

C. 634 rpm

D. 624 rpm

Problem 484.

A four-pole shunt connected generator has a lap connected armature with 728 conductors. The
flux per pole is 25 mWb. If the generator supplies two hundred fifty 110 V, 75 W incandescent lamp. The
field and armature resistances are 110 ohms and 0.025 ohm, respectively. Determine the speed in rpm
of the generator.

A. 364

B. 386

C. 377

D. 393

Problem 485.

A speed-indicating device consists of a 2-pole permanent magnet DC generator with a 2000

ohms DC voltmeter connected across its terminals. The generator has an armature with 1200
conductors having two parallel paths and a total resistance of 1000 ohms between brushes. The air gap
flux is 40,000 lines per pole. If the voltmeter reads 10 V, at what speed will this reading indicated?

A. 1534 rpm

B. 1562 rpm

C. 1512 rpm

D. 1582 rpm
Problem 486.

A shunt generator supplies a load of 5,500 W at 110 V through a pair of feeder conductors
having a resistance of 0.02 ohm each. The armature, shunt field resistances are 0.15 ohm and 50 ohms,
respectively. Find the emf generated.

A. 119 V

B. 118 V

C. 121 V

D. 120 V

Problem 487.

The no-load voltage of a 50 kW, 220 volts, shunt generator in the FEU laboratory is 232 volts and
rated load voltage is 220 volts. The armature resistance including brushes, is 0.026 ohm and the
resistance of the shunt field resistance is 52 ohms. What is the induced electromagnetic force at rated
load?

A. 221.36 V

B. 226.02 V

C. 224.56 V

D. 227.05 V

Problem 488.

The field current of a 180 kW, 250 volts DC shunt generator is 6 A when running full load at
rated terminal voltage. If the combined armature and brush resistance is 0.02 ohm, solve for the
electrical efficiency of the generator.

A. 92.13%

B. 94.05%

C. 93.73%

D. 91.87%

Problem 489.

The field circuit of 200,000 watts, 230 V shunt generator is 8 A when running full load at rated
terminal voltage. If the combined brush and armature resistance is 0.03 ohm, solve for the electrical
efficiency of the generator.
 A. 85.34%

B. 89.14%

C. 88.91%

D. 87.82%

Problem 490.

The field current of a 100 kW, 250-volt shunt generator is 5 amperes when delivering power at
rated terminal voltage and rated load current. The combined armature and brush resistance is 0.01
ohm. Determine the efficiency of the generator.

A. 97.2%

B. 94.3%

C. 98.2%

D. 94.7%

Problem 491.

The armature of a shunt generator has a 0.05-ohm effective resistance. Each brush has an
effective resistance of 0.01 ohm. The terminal voltage is 100 volts while the current is 40 amperes. What
is its efficiency?

A. 95.15%

B. 97.65%

C. 97.30%

D. 96.52%

Problem 492.

A shunt generator is connected to a load that draws 28.8 kW. R a = 0.04Ω and Rsh = 48Ω. If the
power developed in the armature is 106.3% of the power delivered to the load. Determine the terminal
voltage of the generator.

A. 238 V

B. 240 V

C. 234 V

D. 236 V
Problem 493.

A 15 kW, 230 V, shunt generator was run light as a motor determine its stray power losses at
rated load. The applied voltage across the armature, computed for test was 254 V and the armature
current drawn is 2 A. The armature and shunt field resistances are 0.25 and 100Ω, respectively.
Calculate the generator efficiency at half load. Assume stray power losses to be constant.

A. 81.34%

B. 84.83%

C. 83.77%

D. 87.08%

Problem 494.

A shunt generator supplies 100A at 200 V. The armature and shunt resistances are 0.025 Ω and
100 Ω, respectively. If the copper losses are equal to the iron losses at this load, find the brake
horsepower of the engine driving the generator.

A. 26.43 hp

B. 28.58 hp

C. 30.12 hp

D. 32.24 hp

Problem 495.

A 20 kW, 200 V shunt generator is operated at rated load. If the driving engine is developing 30
bhp, determine the iron and friction losses. Armature resistance is 0.05 ohm and shunt field resistance is
50 ohms.

A. 1340 W

B. 1039 W

C. 954 W

D. 1034 W

Problem 496.
 A 220 V shunt generator has an armature resistance of 0.02 Ω and a shunt resistance of 44 Ω. At
rated load, the driving engine develops 62.25 hp. If the iron and friction losses amount to 1600 W, how
much is the current delivered to the load at rated condition?

A. 189 A

B. 200 A

C. 195 A

D. 192 A

Problem 497.

A DC generator has no-load output voltage of 120 volts. Its armature circuit resistance 0.95 ohm
and its field coils are separately energized, what power could be delivered at the load?

A. 1,518 W

B. 2,180 W

C. 1,670 W

D. 2,000 W

Problem 498.

The armature of a 6-pole separately excited dc generator is lap wound with 534 conductors. This
machine delivers power to the load qt 250 V while being driven at 1000 rpm. At this load, the armature
circuit dissipates 640 W. If the flux per pole of this generator is 30 mWb, determine the kW rating of the
load served. Assume a total brush contact drop of 2 V.

A. 10.67 kW

B. 11.24 kW

C. 12.56 kW

D. 15.44 kW

Problem 499.

A separately excited generator when running at 1200 rpm supplies 200 A at 125 V to a circuit of
constant resistance. Armature circuit resistance is 0.10 ohm. Determine the terminal voltage when the
speed is dropped at 1000 rpm? Assume that the field current is unaltered.

A. 104 V

B. 125 V
 C. 118 V

D. 114 V

Problem 500.

A dc series generator is supplying a current of 5 A to a series lighting system through a feeder of

total resistance, 1.0 ohm. The terminal voltage is 2500 V. The armature and series field resistances are
respectively 18 and 15 ohms, respectively. A 30-ohm diverter resistance is shunted across the series
field. Determine the power developed in the armature of the generator?

A. 132.25 kW

B. 137.50 kW

C. 123.29 kW

D. 136.80 kW
501. A 30 kW series generator has an efficiency of 88 percent when operating at rated load. If the
stray power loss is 15% of the full load losses, calculate the maximum efficiency of the generator.
Assume that the stray power loss is constant and the other vary as the square of the load.

A. 90.43%
B. 92.04%
C. 91.12%
D. 89.92%

502. The hysteresis and eddy current losses of a DC machine running at 1000 rpm are 250 watts and
100 watts, respectively. If the flux remains constant, at what speed will the total iron loss be halved?

A. 500 rpm
B. 550 rpm
C. 570 rpm
D. 630 rpm

503. The eddy current loss in a DC machine is 600 watts when the total flux is 2,000,000 maxwells
per pole and the machine is running at 1000 rpm. Determine the loss when the excitation of the
machine is adjusted to produce 2,500,000 maxwells per pole and the speed is increased to 12000
rpm.

A. 900 watts
B. 1025 watts
C. 1280 watts
D. 1350 watts

504. In a DC generator, the iron losses at 1,000 rpm are 10 kW at a given field current. At a speed of
750 rpm and at the same field current, the total iron losses become 6 kW. Assume the hysteresis loss
is directly proportional to the speed and the eddy current loss is proportional to the square of the
speed. Determine the iron losses at 500 rpm.

A. 4 kW
B. 5 Kw
C. 3 kW
D. 2 kW

505. A compound dynamo supplies a load of 20 kW at 400 V through a feeder having a resistance
equal to 0.1 ohm. The shunt and series field resistances are 85 ohms and 0.06 ohm respectively.
Determine the total electromotive force when the generator is connected long shunt. Assume a
brush contact drop of 1 V per brush and an armature resistance of 0.1 ohm.

A. 418.34 V
B. 412.50 V
C. 415.76 V
D. 421.44 V

506. A long shunt compound generator has the following parameters: Ra = 0.1 Ω, Rse = 0.05 Ω and
Rsh = 120 Ω. This machine supplies power an aggregate dc load of 10 kW. At this load of the
armature generates 246 volts. Determine the terminal voltage.

A. 251.55 V
B. 257.86 V
 C. 253.82 V
D. 247.33 V

507. A compound generator is to be operated, as a flat-compounded long shunt compound

generator. To obtain the same rated voltage at full load and at no load when operated as a shunt
generator, it is necessary to increase the field current by 0.20 A. The shunt field winding has 1000
turns per pole, and the series field winding has 4 turns per pole. If the full load armature current of
the compound generator is 95 A and the series field resistance is 0.025 ohm, calculate the diverter
resistance required.

A. 0.068 Ω
B. 0.042 Ω
C. 0.028 Ω
D. 0.034 Ω

508. The armature, series field and shunt field resistances of a 125 kW, 250-V long shunt cumulative
compound DC generator are 0.025 Ω, 0.01 Ω, and 30 Ω, respectively. If the stray power loss at rated
load is 5 kW, determine the motor brake horsepower required to drive this machine. Assume a
brush drop of 2 V and a stray load loss of 1% of the output.

A. 182.32 hp
B. 201.33 hp
C. 190.85 hp
D. 210.56 hp

509. A long shunt compound generator delivers 100 A, 250 V at rated load. The resistances of the
various windings are: Ra = 0.1 Ω, Rip = 0.02 Ω, Rsh = 100 Ω and Rse = 0.025 Ω. If the stray power
losses amount to 1.8 kW, solve for the overall efficiency of the generator.

A. 90.52%
B. 87.43%
C. 88.32%
D. 86.36%

510. A certain 5.5 kW, 125-V DC long shunt compound generator was operated as a shunt motor at
no load for determination of stray power losses. With 135 V equal to the generated emf at full load
applied to the armature was found to be 2.5 A. The armature, shunt field and series field resistances
are 0.2 Ω, 25 Ω and 0.25 Ω, respectively. Determine the efficiency of the generator at rated load.

A. 84.52%
B. 83.57%
C. 80.21%
D. 82. 23%

511. A compound dynamo supplies a load of 20 kW at 400 V through a feeder having a resistance
equal to 0.1 ohm. The shunt and series field resistances are 85 ohms and 0.06 ohm respectively.
Determine the total electromotive force when the generator is connected short shunt. Assume a
brush contact drop of 1 V per brush and an armature resistance of 0.1 ohm.

A. 415.48 V
B. 411.42 V
C. 416. 23 V
 D. 412.42 V

512. A short shunt compound generator has the following has an armature, series field and shunt
field resistances are 0.04 ohm, 0.03 ohm, and 80 ohms, respectively. The generator serves a 20 kW,
200 V load through a feeder with an equivalent resistance of 0.1 ohm. Solve for the power generated
by the armature.

A. 23.84 kW
B. 21. 30 kW
C. 22.29 kW
D. 21.92 kW

513. A short sunt compound generator has an armature, shunt field and series field resistances of
0.02 Ω, 80 Ω and 0.03 Ω respectively. The generator’s induced emf is 510 V when the terminal
voltage is 500 V. How much load current is delivered under this condition?

A. 197.47 A
B. 190.46 A
C. 194.53 A
D. 192.72 A

514. A short shunt compound generator delivers 150 A at a terminal voltage is 230 V. The shunt field
current is 2.5 A. The resistances of the armature, series field and diverter are 0.032 Ω, 0.015 Ω and
0.03 Ω, respectively. Calculate the electrical efficiency of the generator at this load.

A. 96.4%
B. 93.8%
C. 94.2%
D. 95.7%

515. Two shunt DC generators G1 and G2 are rated at 100 and 150 kW at 110 V respectively. Their
external load characteristics may be considered as straight line. The drop in the terminal voltage
from no-load to full-load is 10 volts for G1 and 20 volts G2. Calculate the no-load voltages of these
generators when they are operated in parallel to supply a load of 20 A, which is divided between
them in proportion to their ratings.

A. G1 = 123.7 V, G2 = 133.7 V
B. G1 = 123.7 V, G2 = 131.7 V
C. G1 = 121.7 V, G2 = 133.7 V
D. G1 = 121.7 V, G2 = 131.7 V

516. Two shunt generators operating in parallel are giving a total output of 320 kW.

Generator Armature Resistance Induced emf

A 0.02 ohm 450 V
B 0.025 ohm 460 V

Find the bus bar voltage. Neglect shunt field current.

A. 450.3 V
B. 446.5 V
 C. 423.4 V
D. 464.2 V

517. Two identical shunt generators running a parallel supply a total load current of 2500 A. Each
machine has a field resistance of 50 ohms and an armature resistance of 0.01 ohm. The induced
emfs generated are 230 and 235 volts, respectively. Calculate the common operating voltage of each
machine.

A. 220 V
B. 222 V
C. 223 V
D. 218 V

518. Three shunt generators operating in parallel supply a total load current of 2000 amperes. Each
machine has a field resistance of 40 ohms and an armature resistance of 0.02 ohm. The emfs
generated are 240, 242 and 245 volts respectively. Determine current delivered by each generator.

A. 550 A, 600 A, 850 A

B. 550 A, 650 A, 800 A
C. 500 A, 650 A, 850 A
D. 600 A, 600 A, 800 A

519. Two shunt generators running in parallel deliver a total current of 3,600 A. Each machine has a
field resistance of 60 ohms and an armature resistance of 0.01 ohm. The emfs generated by each
machine are 455 and 460 V, respectively. Calculate the kW share of each machine.

A. 652 kW, 1087 kW

B. 670 kW, 1069 kW
C. 641 kW, 1098 kW
D. 682 kW, 1057 kW

520. A shunt generator and a battery are connected in parallel serving a 500 A busload. The
generator has an external characteristic such that the terminal voltage drops uniformly from 460
volts on no load to 440 volts on rated load while delivering 125 A of current. The battery has an open
circuit emf is 420 V and internal resistance of 0.01 ohm. What percentage of the load current does
the battery deliver?

A. 53%
B. 47%
C. 64%
D. 36%

521. A 50 kW, 220 V dc generator has a voltage regulation of 10%. It is connected in parallel with a
battery of 115 cells, each with an emf of 2 V and internal resistance of 0.01 ohm. What current will
the battery carry if by accident the load is trip-off from the bus.

A. 0A
B. 8.02 A
C. 6.15 A
D. 7.20 A
522. Two identical 600 kW, 230 V dc generators are operating in parallel and taking equal shares of
an 800 kW, 250 V busload. The voltage regulation of each machine is 5%. If one of the generators is
accidentally tripped off from the line, what is the voltage of the remaining machine?

A. 250 V
B. 243 V
C. 245 V
D. 247 V

523. Two 250 V DC generators are operating in parallel and taking equal shares of a 3000 A, 250 V
bus load. The ratings of the generator are as follows:

Machine Parameters Generator 1 Generator 2

Regulation (%) 2 4
Rated Power (kW) 500 400

If the load drops to 2100 A, determine the new operating bus voltage.

A. 252 V
B. 256 V
C. 254 V
D. 253 V

524. Two shunt generators are operating in parallel and taking equal shares of a 2400 A, 230 V bus
load. The ratings of the generator are as follows:

Machine Parameters Generator 1 Generator 2

Regulation (%) 3 4
Rated Power (kW) 500 600
Rated Voltage (V) 250 250

If an additional 600-A load is connected to the bus, determine the current delivered by each
generator at this condition.

A. 1516 A, 1484 A
B. 1525 A, 1475 A
C. 1612 A, 1388 A
D. 1655 A, 1345 A

DC Motors

SPEED CHARACTERISTICS OF A DC MOTOR

where: N = speed (rpm)

a = number of armature current paths

 P = number of poles

Z = number of conductors

Φ = flux per pole (weber)

Eb = back emf or counter emf (volt)

k = proportionality constant

TORQUE DEVELOPED IN THE ARMATURE

where: T = torque developed (newton-meter)

Ia = armature current (ampere) P = number of poles

N = speed of armature rotation (rpm) Z = number of conductors

Pd = power developed in the armature (watt) Φ = flux per pole (weber)

a = number of armature current paths k = proportionality constant

MECHANICAL POWER OUTPUT

where: Hp = mechanical power output (horsepower)

N = speed of armature rotation (rpm)

T = torque developed

Note: If the given torque is in pound-foot use the constant 33,000 and if it is in newton-meter,
use the constant 44760.

SHUNT MOTOR

The armature coils and the shunt field coils are connected in parallel.
Note: In a shunt motor, unless otherwise specified, the flux is assumed to be constant.

SERIES MOTOR

The armature coils and the shunt field coils are connected in series.

Note: In a series motor, flux is directly proportional to the armature current.

LONG SHUNT COMPOUND MOTOR

The series field coils are connected in series with the armature coils while the shunt field coils are
connected across the series combination.

SHORT SHUNT COMPOUND MOTOR

The series field coils are connected in series with the supply voltage while the shunt field coils and
the armature coils are connected in parallel.
where: Vs = supply voltage (volt)

Eb = back emf (volt)

Ra = armature equivalent resistance (ohm)

Rse = series field winding resistance (ohm)

Rsh = shunt field winding resistance (ohm)

Im = current drawn from supply (ampere)

Ia = armature current (ampere)

Ise = series field current (ampere)

Ish = shunt field current (ampere)

MOTOR STARTING

Note: At starting, the armature draws a high current due to the back emf of the motor at the
instant of starting is equal to zero (Eb = 0).

 Armature starting current without a starting rheostat

 Armature starting current with a starting rheostat inserted in the armature

where: Ias = armature starting current (ampere)

Ra’ = equivalent resistance of the armature circuit (ohm)

Vs = supply voltage (volt)

R = resistance of the starting rheostat (ohm)

SPEED REGULATION

 Speed relation is the percentage rise in speed when the mechanical load of the motor is
removed.
where: NNL = no-load speed of the motor

NFL = full-load speed of the motor

POWER LOSSES AND EFFICIENCY

Note: For power losses, refer to the formulas in DC generators.

TEST TO DETERMINE THE CONSTANT LOSSES OF A DC MACHINE

(GENERATOR OR A MOTOR)

Run the machine as a motor a no load with the same operating speed.

where: Pk = rotational or constant losses (watt)

VsNL = supply voltage during the test (volt)

IaNL = armature current during the test (ampere)

Ra = armature equivalent resistance (ohm)

PONY BRAKE TEST OF A MOTOR

This test is used to determine the output horsepower of the machine.

where: T = torque exerted by the motor during the test

N = speed of the motor shaft during the test (rpm)

Hp = output horsepower of the motor

k = constant for conversion

= 33,000 if torque (T) is in pound-foot (lb-ft)

= 44760 if torque (T) is in Newton-meter (N-m)

 SPEED REVERSION OF A SELF-EXCITED DC MOTOR

The direction of rotation of a self-excited DC motor can be reversed using any of the ff. techniques:

 by interchanging the armature terminals

 by interchanging the field terminals

Note: If both of them were interchanged, the direction of rotation will not change.

SPEED CONTROL OF A SELF-EXCITED DC MOTOR

The speed of a self-excited DC motor can be varied using any of the ff. techniques:

 by inserting a rheostat in the armature circuit

 by inserting a rheostat in the field circuit
 by using a potentiometer to vary the supply voltage applied to the motor

525. A simplex lap wound armature has 580 conductors and carries a current of 125 amperes per
armature current path. If the flux per pole is 20 mWb. Calculate the electromagnetic torque
developed by the armature?

A. 210.64 N-m
B. 252.72 N-m
C. 230.77 N-m
D. 207.63 N-m

526. A 6-pole lap wound shunt motor takes 300 A when the speed is 500 rpm. The flux per pole is
0.06 Wb and the armature has 870 turn. Neglecting the shunt field current, calculate the brake
horsepower of the motor. Assume a constant loss of 4%.

A. 175
B. 168
C. 172
D. 165

527. A 220 V shunt motor driving its normal load draws an armature current of 50 A from a 220 V dc
source. The armature resistance of this motor including brushes is 0.25 ohm. How much armature
current (minimum) will this motor draw from a 200 V dc source when driving the same load with the
field adjusted to maintain the same speed.

A. 55.76 A
B. 58.24 A
C. 60.12 A
D. 63.48 A

528. A DC shunt motor has a full load rating of 15 hp, 230 volts, 57.1 amperes, 1400 rpm. The
armature circuit resistance is 115 ohms. Neglecting the effect of armature reaction, determine the
no-load line current.

A. 6.74 A
B. 5.62 A
 C. 7.45 A
D. 8.64 A

529. At rated load, a shunt motor draws an armature current of 50 A from a 230 V dc mains while
running at 1000 rpm. At no load the armature current drops to 5 A. If the effect of armature reaction
has weaken the flux by 2% from no-load to full load, determine speed of the motor at no-load.
Assume the armature resistance to be 0.15 ohm.

A. 1202 rpm
B. 1221 rpm
C. 1122 rpm
D. 1010 rpm

530. The nameplate rating of a shunt motor is 150 hp, 600 volts, 205 A, 1700 rpm. The resistance of
the shunt field circuit is 240 ohms and the total armature circuit resistance is 0.15 ohm. Calculate the
speed regulation of the motor.

A. 4.07%
B. 4.89%
C. 5.25%
D. 5.18%

531. A DC shunt motor runs at 600 rpm on a 240-volt supply while drawing a line current of 30 A. Its
armature and field resistances are 0.5 Ω and 120 Ω respectively. What resistance should be placed in
series with the armature circuit in order to reduce the speed to 400 rpm. Assume no changes in the
armature or field current.

A. 1158 rpm
B. 1086 rpm
C. 1262 rpm
D. 1045 rpm

532. A 120-V shunt motor has an armature equivalent of 0.5 Ω and a field resistance of 60 Ω. At full
load, the motor takes 10 A and the speed is 1000 rpm. At what speed must this motor maybe driven
as a generator to deliver 10 A to an external load at 120 V?

A. 1158 rpm
B. 1086 rpm
C. 1262 rpm
D. 1045 rpm

533. A belt-driven 150 kW shunt wound DC generator is running at 450 rpm and is supplying full load
to a bus bar at 240 V. At what speed will it run if the belt breaks and the machine continue to run
taking 8.5 kW from the bus bar? The armature and field resistances are 0.05 ohm and 85 ohms
respectively. The brush contact drop is 1.5 volt per brush. Neglect armature reaction.

A. 395 rpm
B. 388 rpm
C. 402 rpm
D. 358 rpm
534. A shunt motor draws a current of 40 A from a 120 V source and runs at 1200 rpm at rated load.
The armature and field current resistances are 0.1 Ω and 60 Ω, respectively. Determine the speed of
the motor at half load. Assume a brush drop of 2 V at rated load and 1 V at half load.

A. 1180 rpm
B. 1238 rpm
C. 1230 rpm
D. 1026 rpm

535. A DC shunt motor has a full load rating of 15 hp, 230 volts, 57.1 amperes, 1400 rpm. The
armature circuit resistance is 0.13 ohm and the field circuit resistance is 115 ohms. Neglecting the
effect of armature reaction, determine the no-load speed.

A. 1392 rpm
B. 1264 rpm
C. 1441 rpm
D. 1380 rpm

536. A 220-V shunt motor delivers 40 hp on full load at 950 rpm and has an efficiency of 88%. The
armature and field resistances are 0.2 ohm and 110 ohms, respectively. Determine the starting
resistance such that the starting armature current does not exceed 1.6 times the full load current.

A. 0.704 ohm
B. 0.732 ohm
C. 0.712 ohm
D. 0.739 ohm

537. A 120-V motor rated at 5-hp has a full load efficiency of 86%. The field and armature resistances
are 60 ohms and 0.75 ohm, respectively. What starter resistance will be required to limit the
armature current at starting to 200% of its rated armature current?

A. 1.02 ohms
B. 1.12 ohms
C. 1.00 ohm
D. 1.22 ohms

538. A 10-hp 230 V DC motor of 85% full load efficiency is located 450 ft from the supply mains. If
the motor’s starting current is 1.75 times the full load current, what is the smallest cross-sectional
are of copper wire required when the allowable voltage drop in the feeder at starting is limited to 24
volts?

A. 30 MCM
B. 28 MCM
C. 26 MCM
D. 27 MCM

539. The nameplate rating of a shunt motor is 150 hp, 600 volts, 205 A, 1700 rpm. The resistance of
the shunt field circuit is 240 ohms and the total armature circuit resistance is 0.15 ohm. If the motor
is to be deliver full-load torque at 1200 rpm, what value of resistance must be added to the
armature circuit?

A. 0.833 ohm
B. 0.802 ohm
 C. 0.827 ohm
D. 0.862 ohm

540. A 120 V shunt motor draws a current of 77 A at rated load. The armature and shunt field
resistances are 0.2 Ω and 60 ohms respectively. A multi-tap starter rheostat is inserted in the
armature circuit to limit the starting current. If the rheostat has a resistance of 1.732 ohms,
determine the percentage tap used such that the starting current will be limited to 150% of its full
load value?

A. 60%
B. 50%
C. 55%
D. 45%

541. A 10-hp power 220 V DC shunt motor has an armature and field resistance of 0.25 ohm and 100
ohms respectively. The full load efficiency is 83%. Determine the value of starting resistance in order
that the starting current will not exceed 200 percent of full-load value.

A. 2.88 Ω
B. 2.59 Ω
C. 2.15 Ω
D. 2.45 Ω

542. A 50 HP, 550 V shunt wound motor draws a line current of 4.5 A at no load. The shunt field
resistance is 275 ohms and the armature resistance exclusive of brushes is 0.3 ohm, the brush drop
at full load is 2 V. At full load, the motor draws a line current of 84 A. Calculate the efficiency at full
load.

A. 92.0%
B. 88.5%
C. 91.2%
D. 89.9%

543. A 100-volt shunt motor is developing 6 hp while operating at an overall efficiency of 86%. The
armature and shunt field resistances are 0.06 and 50 ohms respectively. Determine stray power
losses.

A. 378 W
B. 367 W
C. 392 W
D. 364 W

544. The shaft power of a shunt motor is 7.8 hp. It draws 50 A from 120 V. The field winding draws
1.2 A. What is the efficiency of the motor?

A. 94.7%
B. 93%
C. 96.9%
D. 98.2%

545. A 500 V shunt motor running at 720 rpm takes an armature current of 50 A. The equivalent
armature resistance is 0.4 ohm. What resistance must be placed in series with the armature to
reduce the speed to 540 rpm while maintaining the same torque?
 A. 2.2 ohms
B. 2.6 ohms
C. 2.4 ohms
D. 2.8 ohms

546. A certain shunt motor has an armature resistance of 0.05 ohm. It draws 50 A at a terminal
voltage of 120 V. Assume the other miscellaneous losses at 1%. Determine the output horsepower of
the motor.

A. 8.5 hp
B. 7.1 hp
C. 6.8 hp
D. 7.8 hp

547. The armature and field resistances of a shunt machine are 0.2 ohm and 110 ohms respectively.
While running as a generator, the generated emf is 250 V at 1200 rpm. If the machine is run as a
shunt motor, it takes 4 A at 220 V. At a certain load the motor takes 30 A at 220 V. However, on load,
the armature reaction weakens the field by 2%. Find the motor speed at this load.

A. 1120 rpm
B. 1050 rpm
C. 1042 rpm
D. 1025 rpm

548. A shunt motor, which has a field resistance of 220 ohms and an armature resistance of 0.8 ohm
takes 26 A from a 260 V supply when running at 500 rpm on full load. In order to control the speed
of the motor a 1.2-ohm resistor is connected in series with the armature. Calculate the speed at
which the motor will run when supplying full load torque.

A. 438 rpm
B. 445 rpm
C. 424 rpm
D. 472 rpm

549. The input and output powers of a 220 V, shunt motor are 30 and 28 kW respectively. The field
and armature circuit resistances are 40 ohms and 0.0125 ohm respectively. Determine the efficiency
of the motor if the output power is reduced to 10 kW.

A. 83.56%
B. 88.67%
C. 84.93%
D. 86.48%

550. A 220 V series motor takes 15 A and runs at 700 rpm. The armature resistance including the
resistance of the series winding is 0.8 ohm. At what speed will it run if a 2-ohm resistance is
connected in series with supply voltage? Assume the motor is taking the same current.

A. 599 rpm
B. 601 rpm
C. 572 rpm
D. 583 rpm
551. The equivalent armature resistance of as series motor is 0.1 ohm. When connected across 110-
V mains, the armature takes 20 A and its speed is 1000 rpm. Determine its speed when the armature
takes 50 A from the same mains, with the field increased by 10%.

A. 809 rpm
B. 954 rpm
C. 856 rpm
D. 884 rpm

552. A 400 V series motor has a field resistance of 0.2 ohm and an armature resistance of 0.2 and an
armature resistance of 0.1 ohm. The motor takes 30 A of current at 1000 rpm while developing full
load torque. What is the motor speed when this motor develops 60% of full load torque?

A. 1302.4 rpm
B. 1256.2 rpm
C. 1297.6 rpm
D. 1135.5 rpm

553. A 10-hp, 230-V, 1200 rpm series motor having rated load efficiency of 85.5%. The armature
resistance including brushes is 0.3 ohm. The field resistance is 0.25 ohm. Assuming the flux varies
directly as the armature current, what value of resistance should e placed in series with this motor
when starting, in order that the starting current maybe limited to a value that will exert a starting
torque equal to 150% of its rate torque?

A. 4.7 ohms
B. 4.4 ohms
C. 5.1 ohm
D. 3.8 ohms

554. The field and armature resistances of a 220-V series motor are 0.2 Ω and 0.1 Ω, respectively.
The motor takes 30 A of current while running at 700 rpm. If the total iron and friction losses are 350
W, determine the motor efficiency.

A. 90.6%
B. 91.5%
C. 89.4%
D. 92.2%

555. A 100-V series motor is used to drive a load through a pulley. This machine has an armature
resistance of 0.2 ohm and a series field resistance of 0.25 ohm. When a torque of 25 N-m is applied
to the pulley, the speed is 600 rpm. If stray power losses at this load is 300 W, calculate the
armature current.

A. 20.62 A
B. 21.89 A
C. 22.72 A
D. 23.41 A

556. A 400 V series motor having an equivalent armature circuit resistance of 0.5 ohm, takes 44 A
current while running at 650 rpm. What is the motor speed for a line current of 36 A?

A. 803 rpm
B. 822 rpm
 C. 812 rpm
D. 806 rpm

557. The resistance of each of the two coils of a series motor is 0.04-ohm, armature resistance, 0.04
ohm. The motor takes 50 A at 100 V while running at 800 rpm and the coils are in series. What will it
speed if the coils are reconnected in parallel while the load torque is doubled?

A. 800 rpm
B. 400 rpm
C. 200 rpm
D. 650 rpm

558. On full load a 500 V series motor takes 100 A and runs at 820 rpm. The armature and series
field resistances are 0.1 and 0.04 ohm respectively. What will be its speed when developing half-full
load torque and with a 0.08-ohm diverter connected across the series field winding. Assume flux is
proportional to the field current.

A. 1563 rpm
B. 1634 rpm
C. 1359 rpm
D. 1429 rpm

559. A 400 V series motor working unsaturated field is taking 60 A and running at 840 rpm. The total
resistance of the motor is 0.1 ohm. At what speed will the motor run when developing half-full load
torque.

A. 1193 rpm
B. 1202 rpm
C. 1167 rpm
D. 1352 rpm

560. A long shunt compound motor takes a current of 42 A from a 230 V source. The generator
parameters are Ra = 0.1 Ω, Rse = 0.2 Ω and Rsh = 50 Ω. If the friction and windage losses amount to
400 W, determine the overall efficiency of the machine.

A. 82.24%
B. 80.56%
C. 81.22%
D. 79.53%

561. A 230 V long shunt machine has the following parameters: Ra = 2.0 Ω, Rsh = 460 Ω and Rse =
0.25 Ω. When the machine is run at no-load at its normal speed and rated voltage, the armature
draws 0.6 A. Determine the armature current drawn if the machine delivers an output of 5hp.

A. 24.35 A
B. 21.22 A
C. 20.36 A
D. 22.83 A

562. A 25 hp, 250 V long shunt compound motor takes 5 A when running light and runs at 1150 rpm.
Armature resistance, 0.15 Ω, Shunt field resistance, 200 Ω and series field resistance, 0.05 Ω. At
rated load the motor takes 86.5 A and runs at 720 rpm. Determine the ratio of torque developed
from no-load to full load.
 A. 1:26
B. 1:34
C. 1:22
D. 1:38

563. A 200 V shunt motor has armature and shunt field resistances of 0.15 Ω and 125 Ω,
respectively. When running light, it takes 6 A and runs at 1200 rpm. A series winding of 0.05 ohm is
added to make it long shunt cumulatively compounded. This winding increases the flux per pole by
25% when the motor is taking its full load current of 100 A. Neglecting armature reaction, solve for
the operating speed as a compound motor.

A. 887 rpm
B. 890 rpm
C. 868 rpm
D. 865 rpm

564. A 220 V DC motor has an armature resistance of 0.4 ohm, a shunt field resistance of 175 ohms
and series field resistance of 4 ohms. This machine is connected as a short shunt compound motor
to 220 V mains. Calculate the power developed by the armature if the armature current is 30 A.
Neglect the brush drop.

A. 2254.6 W
B. 2572.8 W
C. 2652.6 W
D. 2150.5 W

565. The input current to a 220 V short shunt compound motor at no load is 6 A. The shunt field
circuit resistance is 220 ohms, the armature resistance is 0.10 ohm and the series field resistance is
0.08 ohm. What is the stray power loss?

A. 1153.31 W
B. 1066.22 W
C. 1232.54 W
D. 1073.25 W

566. The pony break test of an elevator door drive shunt motor, the ammeter and voltmeter
measuring the input read 34 A and 220 V. The speed of the motor is found to be 910 rpm and the
balance on a 2 ft brake arm read 27.2 pounds. The tare weight of the arm is found to be positive 2.3
pounds. Determine the efficiency of the motor at this load.

A. 87.03%
B. 86.05%
C. 84.45%
D. 88.32%

567. In a brake test of an elevator door motor, the ammeter and voltmeter measuring the input read
34 A at 220 V. The speed of the motor is found to be 910 rpm and the balanced on a 0.61 m brake
arm reads 11.9 kg. The dead weight of the arm is found to be 1.09 kg. What is the output hp of the
door motor?

A. 9.40 hp
B. 10.38 hp
 C. 8.26 hp
D. 9.58 hp

568. A shunt motor with an armature and field resistance of 0.055 and 32 ohms, respectively, is to
be tested for its mechanical efficiency by means of a rope brake. When the motor is running at 1400
rpm, the longitudinal pull on the 6-inch diameter pulley is 57 pounds. The readings of the line
ammeter and voltmeter are 35 and 105, respectively. Calculate the efficiency.

A. 77.10%
B. 75.32%
C. 78.28%
D. 79.12%

569. A shunt motor was tested by means of a pony brake having a length arm of 3.5 feet and a tare
weight 0f 5.7 lbs. The current drawn by the machine from a 240 V line was 50.9 when the scale
reading was 24 lbs and the speed of the motor was 1215 rpm. Calculate the rotational losses of the
motor. The armature and shunt field resistances of the machine are 0.25 Ω and 120 Ω, respectively.

A. 674 W
B. 692 W
C. 620 W
D. 705 W

570. Calculate the force that will be exerted on the scale in a pony brake test when a 20-hp, 1400
rpm motor is operating at full load. The length of the brake arm is 3 ft and the tare weight of the
brake is 3.75 lb.

A. 30.45 lbs
B. 28.76 lbs
C. 21.54 lbs
D. 36.33 lbs

Alternators

GENERATED EMF PER PHASE (DESIGN EQUATION)

where: Ep = generated emf per phase (volt)

 kp = pitch factor or coil span factor

kb = belt factor or distribution factor

f = frequency (Hertz)

Φ = flux per pole (weber)

Z = number of conductors in series per phase

n = number of slots per pole per phase

FREQUENCY OF THE GENERATED EMF

where: f = frequency (Hertz)

P = number of poles

N = speed of rotor’s rotation (rpm)

GENERATED EMF PER PHASE (ELECTRIC CIRCUIT RELATIONSHIP)

where: Ep = generated emf per phase (volt)

Vp = load voltage per phase (volt)

Ip = armature current per phase (ampere)

Ra = armature winding resistance per phase (ohm)

XLa = inductive reactance of armature winding per phase (ohm)

+ IpXLa = if pf is lagging
 - IpXLa = if pf is leading

α = angle between Ep and Ip

 Using complex number format

where: + ϴ = if pf is leading

– ϴ = if pf is lagging

δ = angle between Ep and Vp

Note: The sign of δ is dependent after the result of simplifying the right side of the equation.

SHORT CIRCUIT TEST ON ALTERNATORS

The armature terminals are short circuited while a small field current is applied. Adjustments maybe
made such that Ip is approximately equal to the rated load armature current per phase.

where: A = ammeter reading during the test

 OPEN CIRCUIT TEST ON ALTERNATORS

The armature terminals are open circuited and the field current is made equal to the field current
during the short circuit test.

where: V = voltmeter reading during the test

DC RESISTANCE TEST ON ALTERNATORS

where: Ra = DC resistance of the alternator between any two terminals.

= Ohmmeter reading during the test

Note: In practice, it is customary to multiply the DC resistance R a by a factor of 1.25 to 1.75 to

obtain a value more nearly equal to the armature resistance when it carries AC current.

ALTERNATOR PARAMETERS DERIVED FROM TESTS

where: Xs = synchronous reactance per phase

Za = synchronous impedance per phase

Ra = armature resistance per phase

E∝ = open circuit voltage per phase

Isc = short circuit armature current per phase

PER UNIT VALUES OF THE ALTERNATOR PARAMETERS

where: Sbase = rated apparent power per phase (volt-ampere)

Vbase = rated voltage per phase (volt)

Ibase = rated armature current per phase (ampere)

Rpu, Xpu and Zpu = resistance, reactance and impedance in per unit values

VOLTAGE REGULATION

 Voltage regulation – percentage rise in the terminal voltage of the alternator when the
alternator load is removed.

where: + %IX = if pf is lagging

– %IX = if pf is leading

POWER DEVELOPED IN THE ARMATURE PER PHASE

where: Pd = power developed per phase (watt)

Pdmax = maximum power developed (when, δ = 90°)

Ep = generated emf per phase (volt)

Vp = terminal voltage per phase (volt)

Xs = synchronous reactance per phase (ohm)

δ = angle between Ep and VP

POWER LOSSES AND EFFICIENCY

where: VL = line to line voltage Pf = field winding losses

IL = line current If = field current (ampere)

IP = phase current Rf = field resistance (ohm)

cos ϴ = load power factor Ra = armature resistance per phase

Pcu = armature winding copper losses Vf = voltage across field winding (volt)

Pfw = friction and windage losses

= caused by mechanical friction and the fanning action of the rotor

Pcore = core losses

= caused by eddy currents and hysteresis

Pv = ventilation losses

= the power required to circulate the cooling of air

Note: Friction and windage loss, field loss, core loss and ventilation loss are constant losses,
unless otherwise specified.
 ARMATURE COPPER LOSSES AT ANY SIZE OF LOAD

where: x = percentage loading on the alternator

PCUx = copper losses at x% load

PCUFL = full load copper losses

GOVERNOR’S SPEED REGULATION (GSR)

where: NNL = no load speed

NFL = full load speed

fNL = no load frequency

fFL = full load frequency

CHARACTERISTIC – TRIANGLE OF AN ALTERNATOR

where: ∆f = change in frequency due to change in load

PFL = rating of the alternator

GD = governor’s droop

PARALLEL OPERATION OF ALTERNATORS

Requirements:

 Equal magnitude of terminal voltage

 Equal operating frequencies
 The same phase sequence.
  Case I: With external characteristics given (kW rating, speed regulations, bus load, etc.)

Before bus load changes,

After bus load changes,

where: +∆P = if there is an increase in bus load

-∆P = if there is a decrease in bus load

f = frequency prior to the change in bus load

fNEW = frequency after the change in bus load

+∆f = if there is a decrease in bus load

-∆f = if there is an increase in bus load

 CASE II. With load sharing conditions given (load carried by each alternator, operating
power factor of each alternator, current delivered, etc.)
where: P = real power (watt)

S = apparent power (volt-ampere)

+ϴ = if operating at a leading pf

-ϴ = if operating at a lagging pf

Note: The + sign or – sign for ϴt is dependent after the result of simplifying the right side of the
equation.

571. What is the speed of a 100 kW, 230-volt, three-phase, four pole, 60 Hz alternator?

A. 450 rpm
B. 900 rpm
C. 1200 rpm
D. 1800 rpm

572. A six-pole, 3-phase AC generator has 72 slots, the coil span is 12. What is the pitch factor?

A. 1.000
B. 0.939
C. 0.985
D. 0.966

573. A three-phase alternator has 6 slots per pole per phase. Determine the distribution factor.

A. 0.977
B. 0.956
C. 0.963
D. 0.948

574. A 30 MVA, 15 kVA three-phase alternator will have a per phase nominal impedance of _____.

A. 7.5 ohms
B. 9 ohms
C. 15 ohms
D. None of these

575. A two-pole three phase 50 Hz Y-connected AC generator has 9 slots per pole and 6 conductors
per slot. What is the flux per pole if the voltage on open circuit is 1.1 kV? Assume a coil span of unity.
 A. 0.1657 Wb
B. 0.1742 Wb
C. 0.1507 Wb
D. 0.1728 Wb

576. A 6-pole, 3-phase, 60-cycle alternator has 12 slots per pole and four conductors per slot. The
winding is 5/6 pitch. There are 2,500,000 maxwells (0.025 weber) entering the armature from each
north pole and this flux is sinusoidally distributed along the air gap. The armature coils are all
connected in series. The winding is wye-connected. Determine the open circuit emf of the
alternator.

A. 532.1 V
B. 504.2 V
C. 512.4 V
D. 572.4 V

577. A four-pole, three-phase, 50 Hz, star connected AC generator has 24 stator slots. There are 6
slots conductors per slot and a sinusoidally distributed flux per pole of 63 mWb. Find the terminal
voltage on open circuit if the coil span factor is unity.

A. 546.05 V
B. 579.44 V
C. 568.48 V
D. 558.62 V

578. A three-phase, 6-pole, 72-slot armature of a synchronous generator is wound using a two-layer
lap coil having 20 conductors per coil with a pitch of 83.33%. The flux per pole is 4,800,000 maxwells.
If the rotor of the generator is driven at a speed of 1200 rpm, calculate the induced emf per phase.

A. 5,680 V
B. 5,390 V
C. 5,564 V
D. 5,854 V

579. A 1 MVA, 11 kV, three-phase wye-connected synchronous generator has a synchronous

reactance of 5 ohms and a negligible resistance per phase. At a certain field current the generator
delivers rated load at 0.9 lagging power factor at 11 kV. For the same excitation, what is the terminal
voltage at 0.9 leading power factor full-load?

A. 11.6 kV
B. 11.5 kV
C. 11.3 kV
D. 11.5 kV

580. A three-phase star connected AC generator is rated at 2.5 MVA, 11 kV, 60 Hz. The generator has
a negligible resistance and a synchronous reactance 20 ohms per phase. To what value will the
terminal voltage rise when full load at 80% pf lagging is switched-off?

A. 14.2 kV
B. 13.5 kV
C. 15.3 kV
D. 12.7 kV
581. A 1200 kVA, 6600 volt, 3-phase Y connected alternator has an effective resistance of 0.40 ohm
and a reactance of 6 ohms per phase. It delivers full load current at 0.80 lagging power factor at
rated voltage. What will be the terminal voltage for the same excitation and load current, if the
power factor is 0.80 leading?

A. 4560 V
B. 9878 V
C. 7898 V
D. 4250 V

582. A 2500 kVA, 6600 V synchronous turbo alternator is operating at full load and 0.8 pf lagging.
This machine has a synchronous reactance per phase is 10.4 ohms and a negligible resistance.
Calculate the percentage voltage regulation.

A. 48.56%
B. 42.35%
C. 45.84%
D. 43.96%

583. A 50-kVA, 550-volt single phase alternator draws a field current 10 A at rated load. With the
same filed current, the open circuit emf and short-circuit current are 300 V and 150 A. The ohmic
resistance of the armature between terminals is 0.18 ohm. The ratio of effective to ohmic resistance
maybe taken as 1.5. Determine the regulation at 0.8 power factor lagging.

A. 27.8%
B. 26.4%
C. 25.5%
D. 24.9%

584. A generator is rated 100 MW, 13.8 kV and 90% power factor. The effective resistance is 1.5
times the ohmic resistance. The ohmic resistance is obtained by connecting two terminals to a DC
source. The current and voltage are 87.6 A and 6 V respectively. What is the effective resistance per
phase?

A. 0.0513 ohm
B. 0.0685 ohm
C. 0.342 ohm
D. 0.0617 ohm

585. To get the armature resistance of a 100 MW, 13.8 kV and 90% power factor generator, two
terminals are connected to a DC source. The measured current and voltage are 87.6 amperes and 6
volts respectively. What is the DC resistance per phase?

A. 0.0223 ohm
B. 0.0342 ohm
C. 0.0685 ohm
D. 0.0617 ohm

586. A 2 MVA, 2.3-kV three-phase Y-connected alternator operates at rated kVA at a power factor of
80%. The dc armature winding resistance between terminals is 0.08 Ω. The field takes 70 A at 125 V
from an exciter equipment. Friction and windage efficiency of the alternator. Assume the effective
armature-winding resistance is 120% of the DC resistance.

A. 94.0%
B. 92.1%
C. 93.2%
D. 89.5%

587. Determine the efficiency of a 1500 kVA, 2300 V, 3-phase, Y-connected alternator, which
operates at rated output with a power factor of 80%. The DC armature resistance at 70°C between
terminals is 0.08 ohm. The field takes 70 A at 120 V from the exciter equipment. Friction and
windage losses are 15 kW, iron loss is 35 kW and stray load losses is 1.5 kW. Assume the effective
armature winding resistance is 1.5 times the DC value.

A. 94.56%
B. 90.31%
C. 93.35%
D. 92.62%

588. A 2,500 kVA, three-phase, 60 Hz, 6.6 kV wye-connected alternator has a field resistance of 0.45
Ω and an armature resistance of 0.05 Ω per phase. The field current at full load 0.85 pf is 200 A. The
stray power losses amount to 82 kW. Calculate the efficiency of the alternator at full load, 0.85 pf
lagging.

A. 93.7%
B. 94.8%
C. 95.2%
D. 96.3%

589. A 6.6 KV, Y-connected, 3-phase alternator has a synchronous reactance of 6 Ω per phase and a
negligible resistance. At a certain field current the armature is known to induce 5.8 kV per phase.
Calculate the maximum power that can be developed y the alternator at this excitation.

A. 12 MW
B. 11 MW
C. 9.8 MW
D. 10 MW

590. An 11,00 volts three-phase wye-connected turbo alternator has a synchronous reactance of 6
ohms and a negligible resistance per phase. When the field current is 8 A, the open circuit voltage is
12,00 volts. Determine the armature current when alternator developed maximum power.

A. 1456 A
B. 1712 A
C. 1643 A
D. 1566 A

591. A three-phase, 11-kV wye connected synchronous alternator has a synchronous reactance of 8
ohms per phase but negligible resistance. If the excitation is such that the open circuit voltage is 14
kV, determine the power factor at the maximum output.

A. 0.786
B. 0.772
 C. 0.793
D. 0.708

592. A three-phase AC generator is supplying power to a load of 3200 kW at 2300 volts and a power
factor of 60%. Assume that the loss of the line, the generator armature and the load is equal to 10%
of the load, what would be the savings in watts if the power factor were raised to 80%?

A. 100,000
B. 140,000
C. 80,000
D. 230,000

593. A 3-phase 50 MV, 13.8 KV, 3600 rpm, 60 Hz grid connected generator with a synchronous
reactance of 3.8 ohms per phase operating with a lagging power factor of 0.88 at rated voltage and
current. Determine new power factor if the rotor current is decreased by 5%.

A. 0.920
B. 0.935
C. 0.907
D. 0.977

594. A 3-phase 50 MVA, 13.8 kV,3600 rpm, 60 Hz grid connected generator with a synchronous
reactance of 3.8 ohms per phase operating with a lagging pf of 0.88 at rated voltage and current. If
the load decreases such that its prime mover power is decreased by 25% and the rotor current
decreases by the same percentage, what will be the new pf?

A. 0.928
B. 0.998
C. 0.987
D. 0.909

595. A 3-phase 50 MVA, 13.8 kV, 3600 rpm, 60 Hz grid connected generator with a synchronous
reactance of 3.8 ohms per phase operating with a lagging pf of 0.88 at rated voltage and current. If
the machine is to provide a lagging reactive power of 40 MVAR and still operating at its rated
current, what percent change in the rotor current is required?

A. 10.48%
B. 10.24%
C. 11.30%
D. 12.28%

596. A three-phase turbo alternator has a reactance of 15 ohms and negligible resistance, the
machine draws an armature current of 250 amperes at 0.8 pf lagging when running on 12,00 volts
infinite busbars. If the steam admission is constant but the emf is raised by 20%, calculate the new
operating pf.

A. 0.547
B. 0.586
C. 0.509
D. 0.575
597. A three-phase, 20 kV, synchronous alternator has a reactance of 10 ohms and a negligible
resistance. The machine draws an armature current of 150 A, 0.80 pf lagging. If the steam admission
is constant and field current is adjusted raising the induced emf by 25%, determine the value of the
new armature current.

A. 442 A
B. 452 A
C. 421 A
D. 433 A

598. A standby Diesel generator set will have the following loads: Inductive load drawing 50 kVA at
0.8 power factor: Lighting load drawing 20 kVA at 1.0 power factor. At what power factor will the
generator operate?

A. 0.855 lagging
B. 0.872 lagging
C. 0.821 lagging
D. 0.894 lagging

599. A 250 V, 30 Hz generator supplies power to a parallel circuit consisting of a 20 hp motor whose
efficiency is 90% at 0.80 pf lagging and a second load that draws an apparent power of 7 kVA at unity
pf. Determine the system reactive power.

A. 23.582 kVAR
B. 12.435 kVAR
C. 10.341 kVAR
D. 20.384 kVAR

600. Two 3-Ф, 4160 V, 60 Hz alternators are operated in parallel. The total load of the system is 1050
W at 75% lagging pf. If alternator A is carrying 700 kW at 80% pf lagging, determine kVAR of
alternator B.

A. 401 kVAR
B. 405 kVAR
C. 411 kVAR
D. 408 kVAR
601. Two alternators A and B are operating in parallel supplying a load drawing 1000 kVA at 0.80
power factor lagging. If alternator A contributes 500 kVA at 0.60 power factor lagging, determine the
power factor of alternator B.

A. 0.928 lagging C. 0.901 lagging

B. 0.852 lagging D. 0.977 lagging

602. Two identical three-phase Y-connected alternators A and B share equally a load of 10 MW at
33 kV and 80% lagging pf. The synchronous reactance of each machine is 4 ohms per phase
and the armature resistance is negligible. Alternator A has its field excitation adjusted to
carry 125 A lagging current, what is the current supplied by alternator B?

A. 96 A C. 98 A

B. 97 A D. 95 A

603. Alternator A (100 kVA, 3-Φ, 240 V, 60 Hz, 1800 rpm) is operating in parallel with alternator B
(125 kVA, 3-Φ, 240 V, 60 Hz, 1800 rpm). The load of alternator A is 60 kW at 90% pf lagging
and the load of alternator B is 80 kW at 70% pf lagging. Determine pf of load.

A. 0.775 lagging C. 0.893 lagging

B. 0.784 lagging D. 0.866 lagging

604. Two 3-phase, Y-connected turbo alternators supply a load of 3000 kW at 6.6 kV and at 0.8 pf
lagging. The excitation of machine A is adjusted so that it delivers 150 A at a lagging power
factor, and the governors are so set that the load is shared equally between the machines.
Determine the power factor of machine B.

A. 0.726 C. 0.704

B. 0.792 D. 0.768

605. Two alternators are operating in parallel supplying a common load of 4250 kW at 0.85
power factor lagging. Alternator A contributes 600 kVAR at 0.92 power factor lagging. Solve
for the power factor of alternator B.

A. 0.813 lagging C. 0.804 lagging

B. 0.834 lagging D. 0.820 lagging

606. Two Y-connected alternators A and B running in parallel supply the following loads at 3.3 kV:
Load 1: 800 kW at unity pf
Load 2: 600 kW at 0.8 pf lagging
Load 3: 400 kW at 0.707 pf lagging
If alternator A is adjusted to carry an armature current of 150 A at 0.85 pf lagging, what is
the armature current of alternator B?
A. 208 A C. 200 A

B. 180 A D. 190 A
607. Two AC generators running in parallel supply the following loads: 400 kW at unity pf; 500 kW
at 0.9 pf lagging; 600 kW at 0.866 pf lagging. One machine is loaded to 1000 kW at a pf of
0.92 lagging, what is the operating power factor of the second machine?
 A. 0.964 lagging C. 0.932 lagging

B. 0.921 lagging D. 0.951 lagging

608. Two alternators are connected in parallel. The total load is 4250 kW at 0.85 pf lagging.
Alternator A operates with a load of 2125 kW at 0.707 pf lagging. Determine the kVA load of
alternator B.

A. 2245 C. 2185

B. 2078 D. 2410

609. Sipalay Mines, has two-3-phase, 60 Hz AC generators operating in parallel. The first unit has
a capacity of 1000 kVA and the second unit has a capacity of 1500 kVA. The first is driven by
a prime mover so adjusted that the frequency fall from 61 Hz at no load to 59.6 Hz at full
load. The second has a different speed-load characteristics, the frequency fall from 61.4 Hz
at no-load to 59.2 Hz at full load. When these alternators are jointly delivering 2000 kW,
what is the load of each generator?

A. 884 kW, 1116 kW C. 915 kW, 1085 kW

B. 867 kW, 1133 kW D. 804 kW, 1196 kW

610. Two alternators are driven by shunt motors. The shunt motors have speed-load droop
characteristics of 3% and 4% respectively. The alternators are in parallel and each carrying
50 kW. There is no automatic speed-load control. An additional 50 kW is switched on. What
are the resulting loads of the alternators assuming that the speed-load control of each is not
adjusted?

A. 78.57 kW/71.43 kW C. 75 kW/75 kW

B. 82.51 kW/67.49 kW D. 80.31 kW/69.69 kW

611. There are two alternators, 100 kW, 3-phase in parallel are driven by shunt motors whose
speed-load characteristics are as follows: Alternator No. 1, no-load speed 600 rpm and the
full-load speed 530 rpm, while alternator No. 2, no-load speed 590 rpm and full-load speed
550 rpm. For what load will the alternator divide the load equally?

A. 62.45 kW C. 67.54 kW

B. 68.78 kW D. 64.67 kW

612. There are two alternators, 100 kW, 3-phase in parallel are driven by shunt motors whose
speed-load characteristics are as follows: Alternator No. 1, no-load speed 600 rpm and the
full-load speed 530 rpm, while alternator No. 2, no-load speed 590 rpm and full-load speed
550 rpm. What is the greatest load that can be delivered without overloading either
alternator?

A. 171.43 kW C.177.54 kW

B.168.78 kW D.164.67 kW
 TRANSFORMERS: Part 1
INDUCED EMF EQUATION:

E = 4.44NfΦm

where:

E = rms voltage induced (volts)

N = number of winding turns

F = frequency of the flux (Hertz)

Φm = peak value of the flux (Weber)

EQUIVALENT CIRCUIT OF AN IDEAL TRANSFORMER:

E1 = 4.44N1f1Φm1

E2 = 4.44N2f2Φm2

where:

N1/N2 = a = turns ratio

E1/E2 = voltage ratio

I1/I2 = current ratio

Z1/Z2 = impedance ratio

E1 = voltage induced in the primary windings

E2 = voltage induced in the secondary windings

Note: A transformer is ideal if its core loss less, has no leakage flux and has no copper losses.

EQUIVALENT CIRCUIT OF A PRAVTICAL TRANSFORMER

 where:

R1 = resistance of primary winding (ohm)

X1 = reactance of primary winding (ohm)

R2 = resistance of secondary winding (ohm)

X2 = reactance of primary winding (ohm)

Xm = magnetizing reactance of primary winding (ohm)

Rm = resistance representing the iron losses (ohm)

Pm = iron losses (watt)

Sm = apparent power absorbed by the core (volt-ampere)

Qm = reactive power needed to set-up the mutual flux (var)

E1 = induced emf of the primary winding (volt)

Eg = supply voltage (volt)

EQUIVALENT CIRCUIT OF A PRACTICAL TRANSFORMER @ NO LOAD

Note: At no load, I2 = 0 and so is I1. Thus, only the exciting current Io flows in R1 and X1. And these
impedances are so small that the voltage drop across them are negligible.

EQUIVALENT CIRCUIT OF A PRACTICAL TRANSFORMER @ FULL LOAD

Note: At full load, Ig is at least 20 times bigger than I o, consequently Io can be neglected and the
corresponding magnetizing branch. This equivalent circuit can be used even if the loading is
only 10% of the rated capacity of the transformer.
SHIFTING TRANSFORMER PARAMETERS FROM PRIMARY TO SECONDARY OR VICE-VRSA

where:

Re1 = equivalent resistance referred to the primary side

Re2 = equivalent resistance referred to the secondary side

Xe1 = equivalent reactance referred to the primary side

Xe2 = equivalent reactance referred to the secondary side

Ze1 = equivalent impedance referred to the primary side

Ze2 = equivalent impedance referred to the secondary side

EQUIVALENT CIRCUIT OF A TRANSFORMER REFERRED TO THE SECONDARY SIDE

where:

V2 = load voltage (volt)

I2 = load current (ampere)

+ (sign) = if power factor is lagging

- (sign) = if power factor is leading

□ Using complex number format

where:

+θ = if power factor is leading

-θ = if power factor is lagging

Δ = ang between E2 and V2

 OPEN CIRCUIT TEST IN TRANSFORMERS

where:

= reading of the wattmeter during the test (watt)

Eg = rated low side voltage (volt)

Pcore = core or iron losses (watt)

SHORT CIRCUIT TEST ON TRANSFORMERS

Note: The supply voltage is adjusted so that the reading of the ammeter is approximately equal to
the rated high side current.

where:

Psc = wattmeter reading during test

Isc = ammeter reading during the test

Esc = voltmeter reading during the test

Re = equivalent resistance referred to the high side

Xe = equivalent reactance referred to the high side

Ze = equivalent impedance referred to the high side

PcuFL = copper losses at full load

POWER LOSSES AND EFFICIENCY

where:

Pout = output power (watt)

Pin = input power (watt)

Pcu = copper losses (watt)

Pcore = core or iron losses (watt)

ke, kh, ke’, kh’ = proportionality constant

f = frequency of the supply voltage (Hertz)

Eg = supply voltage (volt)

βm = maximum flux density of the core (tesla)

V2 = load voltage (volt)

I2 = secondary current or load current (ampere)

pf = load power factor

COPPER LOSSES AT ANY SIZE OF LOAD

where:

X = percentage loading on the transformer

Pcux = copper losses at x% load

PcuFL = full load copper losses

MAXIMUM EFFICIENCY

Note: It will occur only when the core loss and the copper loss are equal.
ALL DAY EFFICIENCY

where:

Wout = total output energy (watt-hour)

Wcore = total energy losses due to core losses (watt-hour)

Wcu = total energy losses due to copper losses (watt-hour)

t = time of usage (hour)

∑ = symbol for a summation process

PER UNIT VALUES

where:

Psc = wattmeter reading during the short circuit test

Esc = voltmeter reading during the short circuit test

VOLTAGE REGULATION

◊ Voltage regulation – percentage rise in the terminal voltage of the transformer when the
transformer load is removed.

AUTOTRANSFORMER

An autotransformer is a transformer with only one winding common to both the primary and the
secondary sides.
 where:

N1 = number of turns of the primary winding

N2 = number of turns of the secondary winding

Ic = current in the common winding

V1 = supply voltage

V2 = load voltage

INSTRUMENT TRANSFORMERS

◊ Current transformer (CT) – to be used in conjunction with an ammeter to measure very high
current

where:

A = current reading of the ammeter

◊ Potential transformer (PT) – to be used in conjunction with a voltmeter to measure very high
voltage.

where:
 V = voltage reading of the voltmeter

613. The maximum flux density in the core of a 3000/240-V, 50 Hz single-phase distribution
transformer is 1.25 Tesla. If the voltage induced per turn is 8 volts, determine the cross
sectional of the core in cm2.

A. 292 C. 288

B. 375 D. 362

614. The net cross section of a transformer is 20 square inches. The maximum flux density is 11
kilogausses. The frequency is 60 Hz. If there are 1,000 turns in the primary, determine the
primary induced emf.

A. 3780 V C. 3590 V

B. 3945 V D. 3850 V

615. Calculate the total magnetic flux in a 60-cycle transformer in which the induced emf per turn
of the winding is equal to 2 V.

A. 7.50 mWb C. 7.50 mWb

B. 7.02 mWb D. 7.42 mWb

616. The low side of a certain welding transformer has 2 turns and delivers 300 A. If the high
voltage side has 30 turns, how much current flows through it?

A. 10 A C. 20 A

B. 12 A D. 15 A

617. A single -phase transformer is rated 4,160 V primary and 250 V secondary. It has 1,500 turns
in the primary and a voltage regulation of 8%. What should be the number of turns in the
secondary winding?

A. 88 turns C. 90 turns

B. 92 turns D. 86 turns

618. The current densities in the primary and secondary windings of a step-down transformer are
1250 and 1500 A per square inch, respectively. The ration of transformation is 10:1 and the
mean length per turn of the primary is 15% greater than that of the secondary. If the
primary winding resistance is 20 ohms, calculate the resistance of the secondary windings.

A. 0.202 ohm C. 0.209 ohm

B. 0.219 ohm D. 0.220 ohm

619. A certain transformer has a ration of 8 is to 1. The primary winding resistance is 0.00283
ohm per turn and has 1155 more turns that the secondary winding. If the copper losses in
the primary is 20% less than in the secondary, find resistance of the secondary winding.

A. 0.073 ohm C. 0.068 ohm

B. 0.090 ohm D.0.084 ohm

620. A 10 kVA, 2400/240-V single-phase transformer has the following resistances and
reactances. Find the primary voltage required to produce 240 V at the secondary terminals
at full load, when the power factor is 0.8 lagging.

r1 = 3 Ω, X1 = 15 Ω r2 = 0.03 Ω, X2 = 0.150 Ω

A. 2450 V C. 2496 V

B. 2572 V D. 2632 V

621. A 10-kVA, 2,000/400 V, single-phase distribution transformer has a primary and secondary
winding impedances of 5.0 + j10 and 0.2 + j0.45 ohms, respectively. Calculate the voltage
across the secondary terminals at full load, 80% power factor lagging, when the primary is
supplied with 2,000 volts?

A. 400 V C. 385 V

B. 394 V D. 379 V

622. A single-phase transformer rated 75 kVA, 8000 volts primary 240 volts secondary, is given
the short circuit test. With the secondary terminals short-circuited, 440 volts (60 Hz) is
impressed on the primary, which then draws rated current and 1125 watts. Solve for the
percentage impedance of the transformer.

A. 5.29% C. 5.50%

B. 4.93% D. 5.13%

623. A short circuit test was performed upon a 10-kVA, 2300/230 volts transformer with the
following results: Esc = 137 volts; Psc = 192 W; Isc = 4.34 A. Calculate in primary terms the
reactance of the transformer.

A. 31.56 ohms C. 10.19 ohms

B. 29.88 ohms D. 12.45 ohms

624. A single-phase, 25 kVA, 4800/240 volt transformer was given a short circuit tests: With the
secondary terminals short-circuited, 93.75 volts was applied on the primary so that the
ammeter reads rated current and the wattmeter reads 162.74 watts, all on the primary side.
Solve for the percentage resistance of the transformer.

A. 1.95% C. 3.02%

B. 3.39% D. 2.23%

625. The following data were obtained when a short circuit test was performed upon a 100 kVA,
2400/240 volts distribution transformer: Esc = 72 volts; Isc = 41.6 A; Psc = 1,180 W. All
instruments are on the high side during the short circuit test. Calculate the equivalent
resistance and reactance of the transformer.

A. 0.682 ohm, 1.59 ohms C. 0.752 ohm, 1.73 ohms

B. 0.682 ohm, 1.73 ohms D. 0.752 ohm, 1.59 ohms

626. A 13.8 kV/480 V, 10 MVA three-phase transformer has 5% impedance. What is the
impedance in ohms referred to the primary?
 A. 0.952 ohm C. 5.125 ohms

B. 0.03 ohm D. 9.01 ohms

627. A short circuit test was performed on a 20 kVA, 2000/200 V single-phase transformer. With
the secondary winding short circuited, full load current flows in the primary winding with
100 V applied on it. The wattmeter connected in the primary read 300 W. Determine the
terminal voltage on full load unity pf.

A. 198.6 V C. 196.7 V

B. 193.4 V D. 195.2 V

628. The following data were obtained when a short circuit test was performed upon a 100 kVA,
2400/240 volts distribution transformer: Esc = 72 volts; Isc = 41.6 A; Psc = 1,180 W. All
instruments are on high side during the short circuit test. Calculate the percent regulation at
a power factor of 0.75 lagging.

A. 2.54% C. 2.62%

B. 2.86% D. 2.71%

629. A 200-kVA transformer with impedance of 5% and the power factor of the load is 85%. The
primary voltage is 6,000 volts while the copper loss is 5 kW. Find the percentage regulation.

A. 5.03% C. 4.43%

B. 5.21% D. 4.03%

630. A 150 kVA, three-phase transformer supplies 100 kVA at 50% lagging power factor. The
transformer’s winding impedance is 2% resistance and 5% reactance, based on 150 kVA.
Determine the voltage regulation of the transformer at this load. Assume 100% voltage.

A. 3.55% C. 4.24%

B. 5.33% D. 4.05%

631. A short circuit test was performed upon a 10-kVA, 2300/230 volt transformer with the
following results: Esc = 137 volts; Psc = 192 W; Isc = 4.34 A. Calculate the percent regulation at
a lagging power factor of 0.707.

A. 5.28% C. 5.37%

B. 5.55% D. 5.72%

632. A 100 kVA, 6600/600 V, 60 Hz single-phase transformer operating at rated condition has the
following losses: hysteresis loss = 520 W; eddy current loss = 370 W and copper loss = 2000
W. If the transformer is to be used on a 50 Hz system, determine its new kVA rating. Assume
the same total losses and maximum core flux.

A. 83.8 C. 87.4

B. 94.3 D. 91.8

633. When 120 V, 60 Hz is applied to the primary winding of a transformer, the core loss is 240
W. When 50 V, 25 Hz is applied the core loss is 50 W. Determine the core loss when 230 V,
50 Hz is applied to the primary winding.
 A. 703.5 W C. 863.6 W

B. 942.6 W D. 874.7 W

634. The eddy current and hysteresis losses of a 4,400-V, 60-Hz single-phase distribution
transformer are 280 and 560 watts, respectively. Determine the core loss when the
transformer is connected across a 4,600-volt, 50-Hz source.

A. 977 W C. 994 W

B. 983 W D. 967 W

635. In a 400 V, 50 c/s transformer, the total iron loss is 2500 W. When the supplied p.d. is 220 V
at 25 c/s, the corresponding loss is 850 W. Calculate the eddy current loss at normal
frequency and p.d.

A. 2337 W C. 2010 W

B. 2165 W D. 2216 W

636. When a 220 V, 60 Hz is impressed on a certain transformer at no load, the total core loss is
200 W. When the frequency of the impressed voltage is changed to 25 Hz and the
magnitude of the voltage is made such as to maintain the same maximum flux density as
before, the core loss falls to 75 W. Calculate the hysteresis losses at 60 Hz.

A. 163 W C. 171 W

B. 166 W D. 169 W

637. A 100-kVA, 4160/230 V, 60 Hz single-phase transformer has percentage impedance of 1.75 +

j4.0. Its efficiency when operating at rated conditions at 75% pf lagging is 97%. Determine
the efficiency, if the transformer is loaded at rated load and voltage but at 50 Hz. Assume
the ratio of eddy current losses to hysteresis losses at 60 Hz to be 2.5.

A. 97.13% C. 97.61%

B. 96.97% D. 96.42%

638. The full load copper loss of a 75 kVA single-phase transformer is thrice the iron losses. At
half load unity pf, the efficiency is 97%. Determine the full load efficiency at 0.8 pf lagging.

A. 95.77% C. 94.78%

B. 98.45% D. 97.86%

639. A 50 kVA, 2300/230 volt, 60-cycle transformer is tested in the laboratory so that its
characteristics maybe determined. The standard test requires an open circuit test and short
circuit test.

Open circuit test I = 6.5 A E = 230 V P = 187 W

Short circuit test I = 21.7 A E = 115 V P = 570 W

Determine the efficiency of the transformer at half load, unity pf.

A. 97.55% C. 98.45%

B. 98.70% D. 97.80%
640. The iron loss of a 25-kVA, 60 Hz single-phase distribution transformer is 1% of the rated
output at unity power factor and the full load copper loss is 360 W. Determine the efficiency
when operating one half of the rated output at 70% power factor lagging.

A. 95.33% C. 94.24%

B. 97.82% D. 96.26%

641. Given that full load copper losses are exactly twice the iron losses in a 50-kVA transformer,
and that the quarter load efficiency is 96.5%. Calculate the full load efficiency at unity power
factor.

A. 97.48% C. 97.64%

B. 98.12% D. 96.25%

642. A 15 kVA, 2300/230-volt transformer is under test. With the low side supplied with rated
voltage and the high side open circuited, input power through a wattmeter reads 245 W.
With the high side supplied with 65 V while the low side short circuited, input power rated
current reads 350 W. Determine the maximum efficiency that can be expected from this
transformer at unity pf.

A. 97.29% C. 97.83%

B. 96.25% D. 98.21%

643. A 10-kVA, 2300/230 transformer has an equivalent resistance referred to the secondary
winding of 0.05 ohm. The core loss of this transformer is 75 W. At what kVA load will this
transformer operate at maximum efficiency?

A. 8.17 kVA C. 9.32 kVA

B. 9.08 kVA D. 8.90 kVA

644. The core loss of a 5 kVA single-phase transformer with normal voltage applied to the primary
is 75 watts. The maximum efficiency occurs at 60% of full load kVA. What is the full load
efficiency of the transformer at 0.80 power factor?

A. 95.16% C. 89.52%

B. 93.38% D. 91.36%

645. A 100-kVA transformer has 94% efficiency at full load and at 50% full load unity pf in both
cases. Determine the maximum efficiency of the transformer at unity pf load.

A. 96.27% C. 93.44%

B. 95.68% D. 94.32%

646. A 100 kVA transformer has a maximum efficiency of 98% at 10% underload and at unity pf.
Evaluate the efficiency at quarter load, 0.80 pf lagging.

A. 96.3% C. 94.7%

B. 95.3% D. 97.7%
647. A 1 MVA, 66/11 kV, 60 Hz transformer has an equivalent series impedance of 1.0 + j5 ohms
referred to the low voltage side and a no-load loss of 5500 watts at rated terminal voltage.
What is the maximum efficiency at 0.8 pf lagging?

A. 98.34% C. 98.02%

B. 97.42% D. 96.38%

648. The all day efficiency of a 10 kVA single-phase transformer is 94.7% when loaded as follows:
full load unity pf for 4 hours and no load the rest of the day. If the full load copper loss unity
pf is 400 watts, calculate the core loss.

A. 75 kW C. 72 kW

B. 70 kW D. 78 kW

649. A 25 kVA distribution transformer operates at 20% overload, 0.3 pf lagging for 1 hour; at full
load, 0.9 lagging pf for 3 hours; 50% load at unity pf for 8 hours; and 10% load at 0.8 leading
pf for the rest of the day. If core loss is 150 watts and full-load copper loss is 500 W, what is
the all day efficiency of the transformer?

A. 94.23% C. 97.14%

B. 92.86% D. 96.68%

650. Find the all-day efficiency of a transformer having a maximum efficiency of 98 percent at 15
kVA at unity pf and loaded as follows:

12 hours ---------- 2 kW at 0.5 pf lagging

6 hours ------------ 12 kW at 0.8 pf lagging

6 hours ----------- at no-load

A. 95.3% C. 94.6%

B. 91.7% D. 93.3%

651. A 30 kVA 2400/240 V, 60 Hz transformer has a full load power of unity over the period of 24
hours. The maximum efficiency is 95% and it occurs at full load. Calculate the all-day
efficiency if loaded as follows:

6 hours at full load

6 hours at quarter load

A. 91.53% C. 90.37%

B. 92.45% D. 93.86%

652. A 1000 kVA, 6,600/400 volts 60 cycle single phase core type transformer has the following
average daily load:

Full load at 0.8 pf for 8 hours

Half load at 0.707 pf for 10 hours

No-load for 6 hours

 Calculate the ratio of full load copper loss to the iron loss for the transformer to be most
economical for the above loading.

A. 2.05 C. 2.17

B. 3.09 D. 2.28

653. The full load copper loss and iron loss of a 75 kVA transformer are equal to 1 kW. During a
given day, the transformer is loaded as follows: full load at unity pf for 8 hours, one-half load
at unity for 8 hours and no-load the rest of the day. Calculate the all day efficiency.

A. 96.36% C. 96.47%

B. 97.23% D. 98.32%

654. A 6.9 kV/600 V, multi-tap, single-phase distribution transformer is connected to the far end
of a distribution line for which the rear end voltage is maintained at 6.9 kV. The equivalent
impedance of the transformer referred to low voltage side is 0.05 + j0.25 Ω per phase. The
impedance of each line is 1 + j2 Ω. It is required to maintain a terminal voltage of 600 V
when the line current of 300 A at 80% pf lagging is delivered to the load. What approximate
percentage tapping is required in the primary side? Neglect changes in impedance due to
changes in turns ratio.

A. 94% C. 90%

B. 92% D. 88%

655. A 60 Hz alternator generates a single-phase voltage of 120 V and has a reactance of 0.25
ohm. The alternator feeds a line, which is essentially resistive with an impedance of 0.1 ohm.
The line is terminated with a 2:1 step up transformer. What should be the load impedance
to be connected to the secondary side to have a maximum power transfer to it?

A. 0.5 + j1.2 C. 0.5 – j1.2

B. 0.4 – j1.0 D. 0.4 + j1.0

656. A transformer consists of a primary winding with 500 turns and two secondary windings of
125 turns and 36 turns. The 125-turn secondary winding has 60 ohms connected to its
terminals and the 36-turn secondary winding has 3 ohms connected to its terminals. If the
primary is connected to a 120-V, 60 Hz source, determine the current in the primary
windings.

A. 0.332 A C. 0.235 A

B. 0.412 A D. 0.257 A

657. A 3-phase, 60 Hz transformer has primary, secondary and tertiary windings. The primary
winding is delta connected and rated 6,600 V. The secondary winding is delta connected and
rated 1000 V. The tertiary winding is wye connected and rated 440 V. If the secondary
winding has a 3-phase balanced load of 100 kVA at 80% pf lagging and the tertiary winding
has a balanced 3-phase load of 50 kW at unity pf, what is the current in the primary winding
and its operating pf?

A. 12.52 A, 0.908 C. 12.52 A, 0.902

 B. 7.23 A, 0.902 D. 7.23 A, 0.908

658. A 20-kVA, 500-V load is to be supplied by an ideal step-up autotransformer from a 400-V
source. Find the current in the common winding.

A. 30A C. 50A

B. 40A D. None of these

659. The two windings of a 10-kVA, 2300/230 volt, distribution transformer is connected in series
to form an autotransformer giving a small reduction to potential difference from a 2300-volt
line. Determine its kVA rating as an ideal autotransformer, operating in the above
conditions.

A. 10 kVA C. 110 kVA

B. 100 kVA D. None of these

660. A 10 kVA, 440/110 volt, single-phase transformer has an efficiency of 96% at a rated load of
unity power factor. The full load copper loss is 250 watts. If this transformer is to be
converted as a 550/440-volt autotransformer, determine its efficiency when supplying full
load at 85 percent power factor.

A. 99.25% C. 97.45%

B. 99.03% D. 98.61%
 TRANSFORMERS: part 2

DELTA-DELTA TRANSFORMER BANK

Equivalent Circuit Diagram

Phasor Diagram

where:

Vp = voltage induced in the primary winding (volt)

Vs = voltage induced in the secondary winding (volt)

V2 = line to line voltage in the secondary side of the bank (volt)

V1 = line to line voltage in the primary side of the bank (volt)

Ip = primary winding of the current (ampere)

Is = secondary winding current (ampere)

I1 = line current in the primary side of the bank (ampere)

I2 = line current in the secondary side of the bank (ampere)

N1/N2 = turns ratio of each transformer

DELTA-WYE TRANSFORMER BANK

Equivalent Circuit Diagram

Phasor Diagram

WYE-DELTA TRANSFORMATION BANK

Equivalent Circuit Diagram

Phasor Diagram

WYE-WYE TRANSFORMATION BANK

Equivalent Circuit Diagram

Phasor Diagram

OPEN-DELTA TRANSFORMATION BANK

Equivalent Circuit Diagram

Phasor Diagram

where:

Sv =total apparent power that an open delta bank can deliver

SΔ =total apparent power that a close delta bank can deliver

SCOTT OR T-CONNECTED TRANSFORMER BANK

Note: This connection is used to transform three-phase system to two phase system or vice-versa. It
consists of two identical single-phase transformers, one having a 50% tap and the other an
86.6% on their primary windings.

Equivalent Circuit Diagram

Phasor Diagram

PARALLEL OPERATIONS OF TRANSFORMERS

Requirements:

□ The voltage ratings of both primaries and secondaries must be identical

□ The transformers must be properly connected with regards to polarity

□ The ration of the equivalent resistance to reactance (R e:Xe) of all transformers should be
the same

◊ Load operations for transformers with unequal turns ratio

◊ Load operations for transformers with equal turns ratio (given their ohmic equivalent
impedances)

where:

a1, a2 = voltage ratios of transformers 1 and 2

V2 = load voltage or terminal voltage

Za1, Za2 = equivalent impedances referred to the secondary side of transformers 1

and
2, respectively
 It = total current or load current

I1, I2 = current delivered by transformers 1 and 2

S1, S2 = apparent powers delivered by transformers 1 and 2

◊ Load operations for transformers with equal turns ratio (given their per unit impedances with
different power base)

Note: Assume a common power base and express all per unit impedances with respect to this new
power base.

where:

kVAnew = selected new power base

kVAold = old power base (rating of the transformer considered)

Ze1’, Ze2’ = equivalent per unit impedances of transformers 1 and 2 based on the new
selected power base
661. What should be the kVA rating of each two transformers in an open-delta bank when the
three-phase balanced load is 290.4 kVA?

A. 155.60 kVA C. 150.25 kVA

B. 173.40 kVA D. 167.66 kVA

662. A V or open delta connected transformer bank, composed of two identical units serves a
balanced 3-phase load of 16 kVA at 230 volts. Solve for the minimum size in kVA of the
transformers needed.

A. 8 kVA C. 16 kVA

B. 9.24 kVA D. 8.25 kVA

663. A V(open delta) connected transformer bank serves a balanced 3-phase load of 40 kVA at
230 V and 0.866 pf lagging. Solve for the minimum kVA of each transformer needed to
accommodate the load without overloading.

A. 25 C. 23

B. 24 D. 20

664. Two single-phase distribution transformers are banked in V (open delta). If each transformer
is rated 37.5 kVA, solve for the maximum 3-phase load that the bank can carry without
overloading, considering that the load has a power factor of 0.85 lagging.

A. 52.5 kW C. 53.6 kW

B. 49.5 kW D. 55.2 kW

665. An open delta bank, consisting of two single-phase transformers is operating with a
balanced three-phase load of 50 kVA, 440 V at 0.8 pf lagging and a single-phase load of 10
kW resistive connected across c-a leg. Determine the minimum ratings of the two
transformers. Assume a phase sequence of a-b-c.

A. 38.80 kVA, 34.06 kVA C. 35.48 kVA, 36.34 kVA

B. 34.32 kVA, 33.40 kVA D. 30.83 kVA, 39.52 kVA

666. Two (2) single-phase distribution transformers, connected in open delta will supply power to
a 200 hp, 3-phase induction motor, operating at 0.70 power factor and 0.90 efficiency. Solve
for the minimum size in kVA of each transformer needed to supply the power without being
overloaded.

A. 136.73 kVA C. 130.38 kVA

B. 124.45 kVA D. 129.48 kVA

667. The Utility Company supplies two single-phase transformers banked in open delta. If each
transformer is rated 75-kVA capacity, what is the maximum 3-phase load in kilowatts that
the bank can carry without suffering overload considering that the load has a lagging power
factor of 0.80.

A. 104 kW C. 130 kW
 B. 112 kW D. 114 kW

668. Two identical 1-phase transformers connected in open delta will serve a 3-phase motor load
of 250 hp, 0.70 pf lagging, 0.90 efficiency. Solve for the minimum size in kVA of each
transformer required to serve the load without overloading.

A. 150.33 C. 160.43

B. 170.91 D. 185.13

669. An open-delta connected transformer bank serves a balanced 3-phase load of 40 kVA at 230
V and 0.886 pf lagging. Solve for the real power and pf at which each transformer is
operating.

A. 11.54 kW at 0.5 pf, 23.09 kw at unity pf

B. 12.22 kW at 0.5 pf, 22.42 at unity pf

C. 11.54 kW at 0.866 pf, 23.09 kW at 0.707 pf

D. 12.22 kW at 0.866 pf, 22.42 kW at 0.707 pf

670. An open delta, three-phase transformer consisting of two single-phase transformers is

operating with a balanced three-phase load of 50 kVA, 440-V at a lagging pf of 0.8.
Determine the operating pf of each transformer.

A. 0.393 lagging, 0.993 lagging

B. 0.383 lagging, 0.887 lagging̪<

C. 0.383 lagging, 0993 lagging

D. 0.393 lagging, 0.887 lagging

671. Two single-phase transformers are connected in V (open delta) and serving a delta
connected impedance load, each impedance is equal to 16<36.87˚ ohms. If the transformer
voltages impressed on the impedance are:

Vab = 240<0 ˚, Vab = 240<240 ˚, Vab = 240<120 ˚ volts

Solve for the kVA delivered by each transformer.

A. 7.28, 5.20 C. 6.84, 5.64

B. 5.87, 6.61 D. 6.24,6.24

672. Two single-phase transformers in an open-delta bank served a three-phase balanced load of
290.4 kVA. If a third transformer is added for delta operation, what percent increase in load
does this represent?

A. 73.2% C. 80.5%

B. 84.6% D. 79.4%

673. Three single-phase transformers each rated 75 kVA are banked in delta and supplying a 3-
phase load drawing 160 kVA at 0.8 lagging power factor. If one transformer is removed for
repairs, solve for the amount of overloading of the remaining units.
 A. 30 kVA C. 20 kVA

B. 10 kVA D. 25 kVA

674. A 6600-volt, 60 Hz, 2-phase network is connected to a three-phase, 4-wire system by a Scott-
connected transformer combination. If there are 1500 turns on the 2-phase side, calculate
the number of turns on the 3-phase side required for the main and teaser transformers.
Voltage per phase on the 3-phase is 240 V.

A. 94 turns, 83 turns C. 95 turns, 82 turns

B. 93 turns, 84 turns D. 92 turns, 85 turns

675. A balanced 3-phase transformer bank has delta-connected primary and wye-connected
secondary winding. The primary to secondary winding voltage ratio is 2400/277. Solve for
the primary line current if the low-side (secondary) load draws a line current of 1000 A.

A. 200 A C. 150 A

B. 115 A D. 175 A

676. A three-phase 150 kVA, 4160 V, 0.8 lagging pf load is to be supplied by three single-phase
transformers having a turns ration of 2. Calculate the current that flows in the primary
windings if the transformers are connected delta-delta.

A. 10.41 A C. 20.82 A

B. 6.01 A D. 12.02 A

677. What should be the turns ratio of a three-phase transformer to transform 10,000 kVA from
230 kVA to 4160 V if the transformer is to be connected Δ-Y?

A. 94 C. 96

B. 98 D. 97

678. A bank of three 50:1 single-phase transformers connected Y- Δ is used to step down the HV
transmission line rated 138 kV. Determine the magnitude of the step down voltage.

A. 126 kV C. 138.55 kV

B. 6.90 kV D. 159.35 kVA

679. The potential transformer of a line has a ration 132,000/66. These are connected wye-delta.
The voltmeter reads 64 volts. What is the voltage of the line?

A. 221. 7 kV C. 135.2 kV

B. 112.5 kV D. 132 kV

680. A power transformer rated 50,000 kVA, 34.5 kV/13.8 kV is connected wye-grounded primary
and delta on the secondary. Determine the full load phase current on the secondary side.

A. 2092 A C. 1449 A

B. 1725 A D. 1208 A
681. A 69/13.8 kV, 10 MVA three-phase transformer is connected wye-grounded delta. What is
the kV rating of the secondary winding?

A. 7.97 C. 23.9

B. 15 D. 13.8

682. The PTs of a 220 kV transmission line have ratio of 132.76 kV/66.375 kV and are connected
wye-wye. A voltmeter connected line to ground reads 66 volts. What is the transmission line
voltage?

A. 228.63 kV C. 223.15 kV

B. 220.10 kV D. 225.25 kV

683. A power transformer rated 50,000 kVA, 34.5 kV/13.8 kV is connected wye-wye. What are
the line currents at full load?

A. 525.2 A, 1725.4 A C. 483.1 A, 1207.7 A

B. 836.7 A, 2092 A D. 1449.3 A, 3623.2 A

684. Two transformers are connected in parallel to supply a common load of 175 kVA. The
transformer A is rated 100 kVA with equivalent impedance of 9.6 ohms while transformer B
is rated 75 kVA with equivalent impedance of 12.5 ohms. Find the kVA load of each
transformer.

A. 78, 97 C. 80, 95

B. 76, 99 D. 75, 100

685. Two distribution transformers are connected in parallel supplying a load of 125 kVA. If
transformer A is rated 50 kVA, with 14 ohms equivalent reactance and transformer B is rated
75 kVA with 11 ohms equivalent reactance. Solve for the loading in kVA of each transformer.

A. 55 kVA, 70 kVA C. 58 kVA, 67 kVA

B. 50 kVA, 75 kVA D. 52 kVA, 73 kVA

686. A 125-kVA distribution transformer with 4% impedance is connected in parallel with another
transformer rated 75-kVA and with 3% impedance. Bothe have the same voltage ratio.
Neglect resistance of each transformer. The total load is 140 kVA at 85 percent power factor.
How much load does each carry?

A. 80.5 kVA/59.5 kVA C. 80 kVA/60kVA

B. 77.78 kVA/62.22 kVA D. 87.50 kVA/52.5 kVA

687. Two parallel transformers have 8% reactance each. One is rated 25 MVA and the other at 15
MVA. For a given 30 MVA load with a lagging pf of 0.8. Determine the load carried by each
transformer.

A. 18.50 MVA, 11.50 MVA C. 15.25 MVA, 14.75 MVA

B. 18.75 MVA, 11.25 MVA D. 16.45 MVA, 13.55 MVA

688. A 500-kVA single-phase transformer “A” with percentage impedance of 0.010 + j0.05 is
connected in parallel with a 250-kVA transformer “B” with a percentage impedance of 0.015
+ j0.04. If the transformers are serving a single-phase load rated 800-kVA, 80% lagging pf,
determine the operating pf of each transformer. Assume the transformer have the same
turns ratio.

A. A = 0.762, B = 0.803 C. A = 0.762, B = 0.856

B. A = 0.772, B = 0.856 D. A = 0.772, B = 0.803

689. The MERALCO has two single-phase transformers with equal turns ratio and ratings and are
operated in parallel to supply a load of 280 kW at 0.80 lagging pf. Transformer A has a
resistance of 2% and a reactance of 8%. Transformer B has a resistance of 1% and a
reactance of 6%. Determine the power delivered by the transformers A and B to the load.

A. A = 123 kW, B = 157 kW C. A = 122 kW, B = 158 kW

B. A = 125 kW, B = 155 kW D. A = 127 kW, B = 153 kW

690. Two single-phase transformers with equal ratings and turns ratio are operated in parallel to
supply a load of 180 kW at a lagging pf of 0.90. Transformer A has a resistance of 1% and a
reactance of 6%. Transformer B has a resistance of 2% and a reactance of 5%. Calculate the
power delivered by each transformer.

A. 83 kW, 97 kW C. 88 kW, 92 kW

B. 79 kW, 101 kW D. 80 kW, 100 kW

691. Two single-phase transformers A and B are connected in parallel to serve a 600-A single-
phase load at 0.80 pf lagging. The equivalent impedance of the transformers are 2 + j3 and
2.3 + j5 ohms, respectively. Determine the ration of the kW output of transformer A to the
kW output of transformer B. Assume the transformers have equal ratings and turns ratio.

A. 1.56 C. 1.68

B. 1.88 D. 1.74
 3-PHASE INDUCTION MOTORS
SLIP

◊ Slip is defined as the difference between the synchronous speed and the actual rotor speed
expressed as a percent (or per unit) of the synchronous speed.

where:

Ns = synchronous speed (rpm)

N = rotor speed (rpm)

F = frequency of the stator voltage (Hertz)

P = number of poles

ROTOR VOLTAGE AND FREQUENCY

where:

fr = rotor frequency at slip s (Hertz)

E2 = approximated voltage induced per phase in the rotor slip s (volt)

= open circuit voltage induced in the rotor per phase also equal to the voltage
per
phase induced when the rotor is blocked (volt)

EQUIVALENT CIRCUIT PER PHASE OF A WOUND ROTOR INDUCTION MOTOR AT STANDSTILL

where:

r1 = stator resistance per phase (ohm)

r2 = rotor resistance per phase (ohm)

Rx = external resistance, effectively connected between one slip ring and the neutral
of the rotor (ohm)

Rm = resistance corresponding to the iron losses and friction and windage losses
(ohm)
 X1 = stator leakage reactance (ohm)

X2 = rotor leakage reactance (ohm)

Xm = magnetizing reactance (ohm)

T = ideal transformer having a turns ratio of 1:1

Note: For squirrel-cage induction motor, Rx = 0.

EQUIVALENT CIRCUIT PER PHASE OF A WOUND ROTOR INDUCTION MOTOR REFERRED TO THE
STATOR SIDE

where:

R2 = r2 + Rx

□ Active power absorbed by the motor (watt)

□ Reactive power absorbed by the motor (var)

□ Apparent power absorbed by the motor (volt-ampere)

□ Power factor of the motor (pf)

□ Line current drawn (ampere)

□ Active power supplied to rotor (watt)

□ Power dissipated as I2R losses in the rotor circuit (watt)

□ Mechanical power developed by the motor (watt)

□ Torque developed by the motor (newton-meter)

□ Efficiency of the motor

NO LOAD TEST OF AN INDUCTION MOTOR

When an induction motor runs at no load, the slip is exceedingly small, thus making R 2/s very large
and I1 becomes negligible compared to I0. Thus, at no load, the circuit consist essentially of the
magnetizing branch Xm and Rm only.

where:

PNL = wattmeter reading during the test (power drawn by the motor)

ENL = voltmeter reading during the test (line to line voltage of the supply)

INL = ammeter reading during the test (line current drawn by the motor)

□ Assuming copper losses are negligible (ideal analysis)

□ Assuming copper losses are not negligible (non-ideal analysis)

Note: This formula shall be used only for a Y-connected motor or motor assumed Y-connected in
the analysis

where:
 Re1 = equivalent resistance per phase of the motor referred to the stator side

Pꚙ = core loss

Pfw = friction and windage losses

LOCKED MOTOR TEST OF AN INDUCTION MOTOR

Under rated line voltage, when the rotor is locked, stator current I p is almost 6 times its rated value.
Furthermore, the slip “s” equals one which means that R 2/s becomes R2 where R2 is the resistance of
the rotor reflected into the stator and since I p is much greater compared to I0, thus the magnetizing
branch can be neglected.

where:

PLR = wattmeter reading during the test (power drawn by the motor)

ELR = voltmeter reading during the test (line to line voltage of the supply)

ILR = ammeter reading during the test (line current drawn by the motor)

Xe1 = equivalent reactance per phase of the motor referred to the stator side

DC STATOR RESISTANCE TEST OF AN INDUCTION MOTOR

where:

R1 = DC resistance between any two terminals of the stator

= ohmmeter reading during the test

POWER FLOW DIAGRAM

where:

Pin = input power drawn by the motor

Pout = output power drawn by the motor

Pcus = stator copper losses

Pꚙ = core losses

Pcur = rotor copper losses

Pm = mechanical power developed

Pfw = friction and windage losses

692. A single-phase induction motor is rated 5 hp, 75% power factor and 220 volts. What is its full
load current?

A. 22.5 A C. 16.9 A

B. 20.5 A D. 18.5 A

693. A 5 hp, 3-phase motor draws current to 230 V. Determine the current drawn by the motor if
the power factor is 0.90 and efficiency of 83%.

A. 12.53 A C. 13.25 A

B. 15.13 A D. 14.05 A

694. A 3-phase motor is rated 750 HP at 460 volts line to line, 0.85 pf lagging and 0.95 efficiency.
Solve for the rated current.

A. 869.64 A C. 405.43 A

B. 702.23 A D. 917.32 A

695. A 40 HP, 3-phase, 4-pole, 230 volt, 60 Hz, induction motor operating at 0.90 efficiency, 0.85
power factor and 3 percent slip, drives a water pump. Determine the current at which the
motor is operating.

A. 94.531 A C. 97.915 A

B. 96.234 A D. 93.351 A

696. Calculate the speed of a 60-cycle, 14-pole motor if the slip is 5%.

A. 514.28 rpm C. 456.32 rpm

B. 488.57 rpm D. 429.63 rpm

697. The rotor speed of a six-pole, 50-cycle induction motor is 960 rpm. Calculate the percent
slip.

A. 5% C. 4%

B. 2% D. 3%

698. What is the speed of an induction motor of six poles if the percent slip is 2.5%?

A. 1462 rpm C. 877 rpm

B. 1170 rpm D. 1755 rpm

699. A squirrel cage induction motor with nameplate data of: 150 HP, 3-phase, 460 V, 60 Hz, 6-
pole, 0.85 pf was subjected to certain performance tests. The test result readings were as
follows:

Full load current = 202 A

Full load torque = 676.8 lb-ft

 Solve the percentage slip.

A. 3.28% C. 3.05%

B. 4.15% D. 2.25%

700. A six-pole, three-phase squirrel-cage induction motor is connected to a 60-cps supply. At full
load, the rotor’s induced emf makes 72 complete cycles in 1 minute. Find the rotor speed.

A. 1176 rpm C. 1054 rpm

B. 1200 rpm D. 1124 rpm

600.

601.

602.
603.

604.

605.
606.

607.
608.

609.

610.
611.
612.

613.
614.

615.

616.

617.
618.

619.

620.
621.

622.
623.

624.

625.

626.

627.
628.

629.
630.

631.

632.
633.
634.

635.
636.

637.
638.

639.
640.

641.

642.

643.
644.

645.

646.
647.

648.

649.
650.

651.

652.
653.

654.
655.

656.
657.

658.

659.
660.

661.
662.

663.

664.

665.
666.

667.

668.

669.
670.

671.

672.

673.
674.

675.

676.
677.

678.

679.

680.

681.
682.

683.

684.

685.
686.
687.

688.
689.

690.
691.

692.

693.

694.

695.
696.

697.

698.

699.

700.
701. A 50 Hp three phase motor, rated 220 V, 75% power factor has 6

poles. The slip at full load is 3%. What is the frequency of the rotor current at

full load?

A. 1.8 Hz

B. 60 Hz

C. 5.4 Hz

D. 58.2 Hz

702. A 150 HP, 3 phase, 6 pole, 460 V, 60 Hz induction motor draws 195 A

line current at full load speed of 1170 rpm and 0.85 pf. Solve for the percent

slip at full load

A. 2.5%

B. 3.0%

C. 2.8%

D. 2.0%

703. The deep well pump motor is 50 HP, 3 phase, 4 poles, 230 volts, 60 Hz

induction motor, operating at 0.90 efficiency, 0.85 power factor and 3% slip.

Determine the current at which the motor is operating.

A. 112.7 A

B. 122.4 A

C. 120.5 A

D. 124.7 A

704. The rotor of a 220 V, 60 Hz, 4 pole induction motor has a power input

of 80 kW. Is observed that the rotor emf makes 90 cycles per minute.

Calculate the rotor copper loss.

A. 2 kW
 B. 5 kW

C. 3 kW

D. 4 kW

705. An induction motor carries a rotor current per phase of 10 A when

loaded until the slip is 5%. If the rotor effective resistance is 0.1 ohm per

phase, determine the total power transferred across the air gap per phase

A. 210 W

B. 240 W

C. 190 W

D. 200 W

706. A 10 hp (nameplate), 6 pole, 60 Hz, three phase induction motor

delivers 9.9 HP with an input of 9200 watts. The core loss is 450 W. the stator

copper loss is 650 watts and the rotational losses is 150 watts. What is the

motor speed?

A. 1116 rpm

B. 1200 rpm

C. 1210 rpm

D. 1125 rpm

707. A 3 phase squirrel cage induction motor is drawing 45 kW from a 440 V

60 Hz 3 phase line. If stator losses amount to 900 W. determine total

mechanical power developed. Assume a slip of 3%.

A. 40.32 kW

B. 44.64 kW

C. 48.22 kW

D. 42.78 kW
708. A 10 HP, 4 pole, 25 Hz, 3 phase induction motor is taking 9100 watts

from the line. Core loss is 290 watts; stator copper loss is 568 watts; rotor

copper loss is 445 watts and the friction and windage loss 121 watts.

Determine the out[put torque in newton-meters

A. 108.4

B. 112.5

C. 101.2

D. 103.3

709. A 40 HP, 230 V, 8 pole, 25 Hz three phase induction motor is running

at 355 rpm at rated load. The torque lost by friction is 24 N-m. if total stator

losses amount to 1000 W, evaluate the efficiency of the motor at this load.

A. 91.42%

B. 88.51%

C. 90.31%

D. 89.15%

710. The rotor of a 220 V, 60 Hz, 4 pole induction motor has a power input

of 80 kW is observed that the rotor emf makes 90 cycles per minute.

Calculate the gross mechanical power developed.

A. 72 kW

B. 78 kW

C. 75 kW

D. 77 kW

711. A 6 pole, 50 Hz, 3 phase induction motor runs at 960 rpm while

delivering a shaft torque of 120 N-m. If friction and windage loss amount to

180 W, determine the rotor copper loss

 A. 521 W

B. 518 W

C. 510 W

D. 526 W

712. Determine the speed in rpm of the motor at full load with the following

circuit elements per phase:

Rotor leakage reactance = 0.65 Rotor resistance = 0.10

Stator leakage reactance = 1.12 Stator resistance = 0.25

Connection = Y-Y

This motor is 500 HP, 3 phase, 2200 volt, 60 cycle, 6 pole induction motor

with additional core loss of 2000 watts and the friction and windage losses total is

10000 watts.

A. 1200 rpm

B. 1196 rpm

C. 1190 rpm

D. 1188 rpm

713. A 50 HP, 440 V, 3 phase, 60 Hz, 6 pole squirrel cage induction motor is

operating at full load and 0.8 pf. The full load efficiency is 85% and the

percentage slip is 5%. Determine the full load torque.

A. 214.55 N-m

B. 206.72 N-m

C. 312.47 N-m

D. 323.24 N-m
 714. A 30 HP, 4 poles, 3 phase, 230 volts, 60 Hz squirrel cage induction

motor operating at 90% efficiency, 85% power factor and 2.5% slip drives a

water pump for a reservoir. Find the current and speed at which the motor is

operating.

A. 73.4 A, 1755 rpm

B. 62.39 A, 1755 rpm

C. 73.4 A, 1800 rpm

D. 62.39 A, 1800 rpm

715. A 50 HP, 3 phase, 4 pole, 60 Hz, 230 volt squirrel cage induction motor

has an efficiency of 90%, a power factor of 85% and a slip of 2% at full load.

Find the torque in lb-ft at full load

A. 152.45

B. 148.87

C. 121.34

D. 150.56

716. The losses in a three phase, 25 Hz, 4 pole induction motor at full load

are as follows:

Core – 3% Stator copper – 4%

Friction and windage – 2% Rotor copper – 2%

At 70% of full load of the machine, determine the efficiency

A. 90.52%

B. 88.15%

C. 87.24%

D. 89.81%
 717. A 100 HP, 440 volt, three phase, 60 Hz induction motor operates with

92 percent efficiency, 0.85 power factor, at rated load. What is the current of

the motor

A. 125 A

B. 115 A

C. 88 A

D. 55 A

718. A six pole three phase 440 V, 60 Hz induction motor develops 10 HP at

1150 rpm, the power factor being 80% lagging. Stator and core losses amount

to 400 W and 350 respectively. Frictional losses amount to 0.5 HP. Calculate

motor line current.

A. 12.24 A

B. 11.42 A

C. 13.41 A

D. 14.64 A

719. A three phase, 7.5 HP, 220 V, 6 pole, 60 Hz, Y connected induction

motors was tested and give the following results

No load test: I = 6.5 A P = 610 W Nr = 1190 rpm

Load test: I = 18.4 A P = 6700 W Nr = 1164 rpm

Resistance test: 0.54 ohm between any two stator terminals

Determine the efficiency of the motor during the load test

A. 83.45%

B. 84.69%

C. 85.28%
 D. 86.55%

720. A three phase wound rotor induction motor, 440 V, 60 cycle, 4 pole is

connected to a pump that delivers 1000 cfm of water against an effective

head of 8 ft. Under this load, the motor draws 15 kW at a power factor of 0.90.

When operated without load, the motor draws 800 watts. The stator

resistance per phase is 0.21 ohm and the rotor resistance per phase is 0.022

ohm. The turns ratio between stator and rotor is 4:1. Determine the efficiency

of the pump.

A. 83.62%

B. 84.65%

C. 83.16%

D. 84.24%

721. A three phase, six pole, 60 Hz, Y connected squirrel cage induction

motor operates with a slip of 2% and draws 10 A and 3500 W at full load.

When running light, the motor draws 4.2 A and 300 W. When the rotor of this

motor is blocked, the motor draws 450 W, 15A at 50V. Calculate the torque

exerted when driving its full load.

A. 22.82 N-m

B. 24.65 N-m

C. 20.36 N-m

D. 26.74 N-m

722. The following data were obtained from a 5 HP, 110 V, 60 Hz, 8 pole, 3

phase, Y connected induction motor

No load test: I = 10 A W 1 = 725 W W 2 = -425 W

Load test: I = 28 A W 1 = 3140 W W 2 = 1580 W Nr = 870 rpm

DC resistance test: 0.16 ohm between ant two stator terminals

Calculate the torque in N-, exerted by the motor during the load test. Assume

the ac resistance is 1.25 times the dc resistance.

A. 44.74

B. 52.42

C. 46.10

D. 43.84

723. A resistor assembly for a wound rotor consist of 20 elements of cast

iron grid elements. The rating of each is 0.10 ohm. When joined in series and

tested across 220 volts, the measured current was 100 A. how much power

was lost in the joints?

A. 1.9 kW

B. 1.8 kW

C. 2.0 kW

D. 2.1 kW

724. A wound rotor motor, 7.5 HP, 230 volts, 3 phase takes a line current of

18.4 amperes, when operating at rated output at an efficiency of 88%.

Calculate the indications on wattmeters when these are inserted to measure

power by the two wattmeter method.

A. 4.035 kW, 2.323 kW

B. 4.232 kW, 2.126 kW

C. 3.902 kW, 2.456 kW

D. 3.855 kW, 2.503 kW

725. Two wattmeter method is used to test a 25 HP, 230 volt, 1800 rpm, 60

cycle, 3 phase induction motor. When the line voltages are 230 volts, one
 wattmeter reads +13400 watts and the other +7400 watts. Determine motor

line current

A. 55.6 A

B. 58.4 A

C. 52.3 A

D. 50.8 A

726. An induction motor of 30 HP, 220 volts, 3 phase draws 450 percent of

the rated current with the rated voltage and delivers during the starting period

130 percent of the normal torque. The full load efficiency and full load pf of

this motor is 80% and 70% respectively. If an autotransformer is used as a

starting unit and starting torque of the load is only 50 percent of the rated

torque of the motor, find the starting voltage

A. 136.44 V

B. 130.65 V

C. 132.36 V

D. 134.20 V

727. A 10HP, 550 V, 60 Hz, 3 phase induction motor has a starting torque of

160% of full load torque and a starting current of 425% of full load current. If

the motor is used on a 440 V, 60 Hz system, what will be the starting torque

expressed in percent of the full load value?

A. 102.4%

B. 101.8%

C. 104.2%

D. 103.5%
728. A 10 HP, 550 V, 60 Hz. 3 phase induction motor has a starting torque

of 160% of full load and a starting current of 425% of full load current. What

will the voltage in order that the starting current be limited to the full load

value?

A. 132.47 V

B. 129.41 V

C. 125.52 V

D. 136.75 V

729. A 25 HP, 230 V, three phase motor with 85% power factor has a

starting current of 5.5 times rated current. To reduce the starting current, a

wye-delta starter installed. What shall be the new starting current?

A. 195 A

B. 302 A

C. 135 A

D. 175 A

730. A squirrel cage motor is started at 50% of its rated voltage. What is the

starting torque relative to its rated voltage starting torque?

A. 50%

B. 100%

C. 25%

D. 75%

731. A delta connected load induction motor draws 100 A from each line of

a three phase source and develops 40 lb-ft torque at standstill. Find the

torque when connected to the same service if the motor is re-connected in

wye
 A. 13.3 lb-ft

B. 120 lb-ft

C. 40 lb-ft

D. None of these

732. An induction motor of 30 HP, 220 V, 3 phase draws 450 percent of the

rated current with the rated voltage and delivers during the starting period of

130% of the normal torque. The full load efficiency and the full load pf of this

motor is 80 percent and 70% respectively. If an autotransformer is used as a

starting unit and the starting torque of the load is only 50 percent of the rated

torque of the motor, find the starting current on the line.

A. 301.4 A

B. 292.7 A

C. 288.6 A

D. 227.3 A

733. A 7.5 HP, 500 V three phase motor induction motor is developing its

full load output at 960 rpm. The starting torque is equal to the full load torque.

What will be the starting torque if the supply voltage falls to 400 volts?

A. 32.34 N-m

B. 35.62 N-m

C. 28.27 N-m

D. 38.82 N-m

734. The deep well pump motor is 50 HP, 3 phase, 4 poles, 230 volts, 60 Hz

induction motor, operating at 0.90 efficiency, 0.85 power factor and 3% slip.

Determine the discharge of the pump in cubic meters per minute, assuming
 that the total head against the pump is working is 50 meters and that the

density of water is 1000 kg per cubic meter

A. 4.103

B. 4.224

C. 4.563

D. 4.205

735. A three phase, 230 V, 6 pole, 60 Hz induction motor is loaded by

means of a pony break. The length and dead weight of which are 2.5 ft and 2

lbs respectively. With 230 V impressed on this motor, the total force delivered

by the pony break is 30 lbs. the power input to the motor is measured by two

wattmeters using the two wattmeter method. These wattmeters register 4 and

8 kW respectively. If the motor has a slip of 5% under this condition,

determine its efficiency

A. 93.62%

B. 92.44%

C. 90.82%

D. 94.43%

736. A 75 kVA, 3 phase transformer supplies the following initial loads:

capacitor bank drawing 25 kVAR and an inductive load drawing 36 kW, 0.715

pf. Determine the maximum HP of induction motor at 0.8 pf and 90%

efficiency that can be added to the load without overloading the transformer.

A. 40.2 HP

B. 38.4 HP

C. 35,5 HP

D. 37.5 HP
 737. The feeder of an industrial plant is has a load of 400 kVA at a power

factor of 75% lagging. An induction motor load drawing 100 kW is added to

the feeder. Determine the operating power factor this motor such that the total

feeder load will have a lagging pf of 90%

A. 0.942

B. 0.894

C. 0.902

D. 0.818

ANSWER KEY

692. A 702. A 712. C 722. A 732. B

693. A 703. B 713. C 723. C 733. B

694. A 704. A 714. A 724. B 734. C

695. C 705. D 715. B 725. B 735. D

696. B 706. A 716. D 726. A 736. D

697. C 707. D 717. A 727. A 737. C

698. B 708. D 718. D 728. B

699. A 709. D 719. B 729. D

700. A 710. B 720. D 730. C

701. A 711. C 721. B 731. A

SOLUTIONS TO TEST 19

692.

693.

694.

695.

696.

697.
698.

699.

700.

701.
702.

703.

704.

705.
706.

707.

708.
709.

710.

711.
712.
713.

714.

715.

716.
717.

718.

719.
720.
721.

722.
723.

724.
725.

726.

727.
728.

729.
730.

731.
732.

733.

734.
735.

736.
737.
 SYNCHRONOUS MOTORS

Rotor Speed

Note: rotor speed of a synchronous motor s approximately equal to the synchronous

speed

where: Nr = rotor speed (rpm)

f = frequency of the stator voltage (Hertz)

P = number of poles

Equivalent Circuit per Phase

Where: Ep = back emf per phase (volt)

Vp = supply voltage per phase (volt)

Ip = motor current per phase (ampere)

Xs = synchronous reactance per phase (ohm)

 + (sign) = if motor is operating at a leading pf

- (sign) = if motor is operating at a lagging pf

Using complex number format

Where: δ = angle between Ep and Vp (also called torque angle)

+ θ = if motor is operating at a leading pf

- θ = if motor is operating at a lagging pf

Power and Torque Developed per Phase

Where: T = torque developed per phase (newton-meter)

Ns = synchronous speed (rpm)

Pd = mechanical power developed per phase (watts)

Note: at maximum power developed condition, sin δ must be equal to 1 (δ = 90o)

Power Losses and Efficiency

Where: Pcu = stator copper losses

Pcore = core losses

Pfw = friction and windage losses

Pf = field copper losses of exciter losses

Pstray = stray power or rotational losses

Pshaft = output power in the shaft

Pstator = input power of the stator

Protor = input power of the rotor (equal to field copper losses)

Cos θ = operating power factor

η = efficiency

Power Flow Diagram

Where: Pd = power developed in the armature

Pout = power output

Note: the power input of the rotor (power losses in the exciter) will be taken into

consideration only when the overall efficiency of the machine is to be determined,

otherwise negligible

TEST 20

738. A three phase Y-connected synchronous motor with a line to line

voltage of 440 V and a synchronous speed of 900 rpm operates with a power

of 9 kW and a lagging power factor of 0.8. The synchronous reactance per

phase is 10 ohms. Determine the torque angle in electrical degrees.

A. 36.33o

B. 33.51o

C. 35.51o

D. 38.46

739. A 10 HP, 230 V, three phase Y-connected synchronous motor has a

reactance of 3 ohms per phase and a negligible resistance. To what voltage

must be the motor is excited in order to deliver full load at unity power factor

and 90% efficiency?

A. 262 V

B. 254 V

C. 248 V

D. 242 V

740. A 1000 kVA, 11kV, 3 phase Y-connected synchronous motor has a

resistance of 3 ohms and a reactance of 25 ohms per phase. Determine the

induced emf when fully loaded at 0.8 power factor lagging.

 A. 5521 V

B. 5362 V

C. 5475 V

D. 5582 V

741. A 500 HP, 2200 V, 3 phase star connected synchronous motor has a

synchronous impedance of 0.3+j3 ohm per phase. Determine the induced

emf per phase if the motor works on full load with an efficiency of 94% and a

power factor of 0.8 leading

A. 1360 V

B. 1354 V

C. 1402 V

D. 1522 V

742. A three phase, star connected synchronous motor takes 50 kW at 660

V, the power factor being 0.8 lagging. This machine has a synchronous

reactance of 1 ohm per phase with a negligible resistance. If the emf is

increased by 30%, the power taken remaining the same, find the new leading

pf current.

A. 94.1 A

B. 85.2 A

C. 90.3 A

D. 88.6 A

743. A 6.6 kV, Y connected synchronous motor has a synchronous

reactance per phase of 10 ohms and a negligible resistance. For a certain

load, the motor draws 990 kW t normal voltage. At this load, the induced emf

per phase is 5160 V. Determine operating pf

 A. 0.478

B. 0.502

C. 0.462

D. 0.518

744. A 75 HP, 600 volt, 1000 rpm, three phase Y connected synchronous

motor has an armature resistance of 0.05 ohm per phase and a leakage

reactance of 0.45 ohm per phase. The efficiency at rated load, 80% pf

leading is 92 %. Determine mechanical power developed within the armature

A. 64 kW

B. 62 kW

C. 60 kW

D. 67 kW

745. A 230 V, 60 Hz, 3 phase, Y connected synchronous motor draws a

current of 20 A and delivers 8 bhp. Armature resistance per phase is o.5

ohm. If the iron and friction losses amount to 300 W, determine the operating

power factor of the motor

A. 0.809

B. 0.807

C. 0.866

D. 0.862

746. A 2200 V, 200 HP, 3 phase mesh connected synchronous motor is

working on full load at an efficiency 0.88 and 0.8 leading. The armature

reactance per phase is 5 ohms. Determine the induced emf per phase.

Neglect resistance

A. 2377 V
 B. 2345 V

C. 2380 V

D. 2307 V

747. A 15 HP, 230 V single phase synchronous motor is taking a current of

50 A at a power factor of 0.85 leading. Effective armature resistance is 0.2

ohm. If this motor drives a mechanical load of 12 HP, determine its rotational

losses

A. 323 W

B. 340 W

C. 376 W

D. 314 W

748. A 440 V, single phase synchronous motor is drawing a line current of

50 A at 0.9 pf lagging. This machine has an armature resistance and

reactance of 0.8 and 10 ohms respectively. If stray power and excitation

losses amount is 500 W and 800 W respectively, determine bhp output of the

motor

A. 23.2

B. 20.4

C. 25.8

D. 18.5

749. A single phase synchronous motor gives an output of 9.46 kW at 0.9 pf

lagging with 600 V, if stray power loss is 600 W and field losses is 900 W,

while effective armature resistance is 0.6 ohm, find the efficiency of the

synchronous motor.

A. 82.35%
 B. 81.24%

C. 85.25%

D. 84.64%

750. A 230 V, 60 Hz, single phase synchronous motor is taking a current of

20 A at 0.866 lagging pf. Effective armature resistance is 0.3 ohm. Iron and

friction losses amount to 450 W. Determine the efficiency of the motor at this

load. Neglect losses in the excitation.

A. 86.15%

B. 85.30%

C. 88.52%

D. 83.20%

751. A three phase star connected synchronous motor draws 70 A at 0.8 pf

leading when connected from a 6.6 kV, 60 Hz, 3 phase source. At this load

the machine operates with an efficiency of 90%. If the synchronous

impedance of the machine is 2+j15 ohms. Determine stray power losses

A. 40.5 kW

B. 28.6 kW

C. 32.8 kW

D. 34.6 kW

752. A 20 HP, 440 V, 60 Hz, 3 phase star connected synchronous motor

has an armature resistance per phase of 0.4 ohm. It is giving its full load

output at a power factor of 0.9 leading. If the stray power losses amount to

500 watts, find the armature current

A. 23.44 A

B. 25.28 A
 C. 22.53 A

D. 20.67 A

753. A 500 V, 60 Hz, single phase synchronous motor develops 20 HP and

is operating at a pf of 0.8 lagging. Effective resistance of armature is 1 ohm.

Iron and friction losses amount to 500 W. Determine power drawn by the

motor from the source.

A. 18.220 W

B. 21.546 W

C. 17.288 W

D. 20.065 W

754. A three phase synchronous motor is measured by two A and B

wattmeters. It reads 28.9 kW and 46.5 kW, respectively. The input power of

the motor is under excited and assumed constant. What are the readings of

A and B wattmeters if the power factor is 85% and the motor is over excited?

A. 48.6 kW, 26.5 kW

B. 42.5 kW, 32.6 kW

C. 52.6 kW, 22.5 kW

D. 51.0 kW, 24.1 kW

755. The input power to a 600 V synchronous motor is measured by means

of two wattmeter method. One wattmeter reads 64 kW and the other reads

36.5 kW. The motor is known to be operating at leading pf. Determine the

line current drawn

A. 104 A

B. 110 A

C. 107 A
 D. 112 A

756. A group of induction motors rated 2200 V, 3 phase, 60 Hz delivers a

total of 600 HP and is operating at an average power factor of 0.8 lagging. If

half of this total load is replaced by a group of synchronous motors operating

at an average pf of 0.8 leading, determine the percentage reduction in the

line current? Assume all motors operate at an average efficiency of 90%

A. 23%

B. 25%

C. 20%

D. 21%

757. A three phase transmission line having a capacity of 10000 kVA serves

a balanced load that draws 5000 kW at a lagging power factor such that the

transmission line is loaded to its capacity. An additional load of induction

motors operating at an average pf of 0.80 is connected to the line. In order to

make use of the line to its full capacity in active power, a synchronous

condenser having losses of 300 kW will be connected to the line. What is the

kVA rating of the synchronous motor required?

A. 11.158

B. 12.189

C. 13.205

D. 10.202

758. A three phase Y connected synchronous motor with a line to line

voltage of 440 V and a synchronous speed of 900 rpm operates with a power

of 9 kW and a lagging power factor of 0.8. The synchronous reactance per

phase is 10 ohms. The machine is operating with a rotor current of 5 A. it is

 desired to continue carrying the same load but to provide 5 kVAR of power

factor correction to the line. Determine the required rotor current to do this

A. 7.88 A

B. 8.06 A

C. 8.62 A

D. 8.28 A

759. A 3600 volts three phase star connected turbo synchronous generator

of synchronous reactance of 0.5 ohm per phase and negligible resistance is

supplying 30000 kVA at 0.8 pf lagging to a large power system. If the steam

supply is cut off, calculate the amount of current that the generator will hten

carry assuming negligible losses

A. 3901 A

B. 3823 A

C. 3094 A

D. 3870 A

760. A wye connected turbo alternator having a synchronous reactance of

0.5 ohm and negligible resistance is connected to a large power system

having a busbar voltage of 13.8 kV supplying a load of 15000 kVA at 0.80

lagging power factor. If the steam supply is cut off, the armature current will

the machine carry assuming negligible losses?

A. 256.55 A

B. 525.62 A

C. 384.26 A

D. 627.55 A
 761. A 1000 kVa, 6600 V wye connected three phase alternator having a

reactance of 8.8 ohms and a negligible resistance is supplying power to a

constant frequency busbar. The open circuit emf at this instance is 4.311 V

per phase. If steam supply is suddenly cut off, the armature current in

amperes is nearest to

A. 57

B. 60

C. 59

D. 56

ANNWER KEY

738. C 743. A 748. A 753. C 758. C

739. B 744. C 749. D 754. D 759. D

740. A 745. D 750. B 755. C 760. C

741. A 746. A 751. D 756. C 761. A

742. B 747. A 752. A 757. B

SOLUTIONS TO TEST 20

738.

739.
740.

741.
742.
743.
744.
745.

746.

747.

748.
749.

750.
751.

752.
753.

754.
755.

756.

757.
758.
759.
760.
761.
 CONVERTERS AND RECTIFIERS

Synchronous converter – a machine that receives alternating current through a set

of slip rings at one end of the armature that rotates at synchronous speed and

delivers direct current from the opposite end and through a commutator and a set of

brushes

Relationship between AC and DC voltages

Where: Vdc = dc voltage

Vac = rms voltage between any two slip rings (line to line voltage)

n = number of slip rings

= 2, for a single phase converter

= 3, for a three phase converter

= 4, for a four phase converter

Efficiency of Converter

if single phase AC input

If polyphaser AC input
Where: Vp = voltage per phase of the AC supply side

Vdc = dc voltage

Vac = rms voltage between any two slip rings

= line to line voltage of the AC supply side

Pdc = DC power delivered

Pac = AC power drawn

n = number of phases

η = efficiency

Synchronous-Synchronous Frequency Converters

Two synchronous machines are coupled together so that both rotors. Having the

proper number of poles will operate at the same speed

Where: f1, f2 = frequency of the first and second synchronous machines

P1, P2 = number of poles of the first and second synchronous machines

Motor-Generator Sets

Where: ηm = motor efficiency

ηc = coupling efficiency

ηg = generator efficiency

Pin = electrical input of the motor (watt)

Pm = mechanical power output of the motor (watt)

Pc = output power of the coupling device (watt)

Pout = output power of the generator

Relationship between Pulley Diameter and Speed

The speed of a pulley is inversely proportional to the diameter

Where: N1 = speed of the driving pulley

N2 = speed of the driven pulley

d1 = diameter of the driving pulley

d2 = diameter of the driven pulley

Single Phase AC Input Rectifier

Rectifier – a device which converts alternating current into unidirectional current by

virtue of characteristic permitting appreciable flow of current in only one direction

Half wave output

Full wave output
Three phase AC input Rectifier

Half wave output

Full wave output

Where: Vac = rms voltage at the input (voly)

= line to line voltage at the input (volt)

Vm = maximum or peak value of the AC voltage at the input (volt)

Voutdc = dc or average voltage at the output (volt)

Voutrms = rms voltage at the output (volt)

Iac = rms current at the input (ampere)

Im = maximum or peak value of the AC current at the input (ampere)

Ioutdc = dc or average current at the output (ampere)

Ioutrms = rms current at the output (ampere)

 TEST 21

762. A single pahse rotary converter has an output voltage of 110 volts =.

Determine the line current in the AC side when the machine delivers a dc

output of 50 A. Assume the machine is operating with a pf of 0.85 and

efficiency of 95%

A. 70.71 A

B. 90.34 A

C. 87.57 A

D. 82.23 A

763. In a three phase synchronous converter, the ratio of the AC voltage to

DC voltage is

A. 0.612

B. 1.0

C. 0.50

D. 0.707

764. A three phase rotary converter delivers 150 A at 500 VDC. Determine

the current on the AC side if the operating power factor of the machine is 0.5

and the efficiency is 90%

A. 179 A

B. 157 A

C. 189 A
 D. 196 A

765. Three single phase transformer connected delta-delta fed a three

phase rotary converter at 2300 V. This converter supplies power to a DC load

that draws 100 kW at 250 V. If the rotary converter operates at an efficiency of

95% at unity pf, calculate the current in the secondary windings of the

transformer bank

A. 397 A

B. 355 A

C. 229 A

D. 240 A

766. An open delta bank is serving a three phase rotary converter. The

converter supplies 175 A of current to a 1.4 ohm dc resistive load. If the

machine draws an AC current of 100 A at 0.8 pf lagging, determine minimum

size of the transformer needed

A. 15.0 kVA

B. 24.7 kVA

C. 25.9 kVA

D. 19.4 kVA

767. A 4 phase star connected rotary converter operating at 0.90 efficiency

and 0.85 power factor is connected across a 220 V, 60 Hz mains and draws

50 A. Determine the DC load current.

A. 208.46 A

B. 220.54 A

C. 216.37 A

D. 212.25 A
768. The dc output of a six phase star connected converter is 500 kW at 400

V. If the pf and efficiency of the machine is 0.866 and 0.92 respectively,

determine the current drawn from the supply.

A. 762 A

B. 740 A

C. 732 A

D. 729 A

769. A 600 kW, 6 phase, Y connected, 18 pole, synchronous converter has

simplex lap wound armature with 1000 conductors. The flux per pole is 60

mWb. The machine runs at 600 rpm at rated load. Determine the AC current

in the slip rings. Assume the operating power factor and efficiency of the

machine is equal to 1.0 and 0.9 respectively

A. 496.21 A

B. 488.42 A

C. 462.25 A

D. 472.07 A

770. A 500 kW, 600 V DC, 12 phase synchronous converter operates as a

direct converter at a full load efficiency of 92% and a power factor of 0.93.

Calculate the AC voltage between slip rings and the AC current drawn from a

12 phase transformer fed supply

A. 112 V, 229 A

B. 112 V, 215 A

C. 110 V, 229 A

D. 110 V, 215 A
771. A 4 pole 230 V, 60 Hz, three phase induction motor directly gives a 6

pole alternator. Determine the output frequency. Assume a slip of 3% in the

motor

A. 90.0 Hz

B. 88.4 Hz

C. 86.6 Hz

D. 87.3 Hz

772. A 4 pole three phase synchronous motor connected across a 60 Hz

supply drives a 6 pole alternator through a belt. If the diameter of the driver

and the driven pulleys are 6 and 10 inches respectively, determine the

operating frequency of the alternator

A. 53 Hz

B. 54 Hz

C. 55 Hz

D. 52 Hz

773. A generator is rated 600 kVA, 240 V, 60 cycles, 3 phase, 6 poles and

wye connected. What will be the speed of the driving pulley if the driven and

driving pulleys are 1 ft and 2 ft in diameter respectively?

A. 2400 rpm

B. 1200 rpm

C. 600 rpm

D. 900 rpm

774. The pullet of an old gen-set has a diameter of 20 inches. The belt

exerts a pull of 353 pounds on the pulley. The gen-set runs at 900 rpm. What

is the approximate kW rating of the gen-set

 A. 75

B. 250

C. 200

D. 37.5

775. A 230 V, 3 phase motor belt drives a 50 kW, 250 V DC generator. The

motor, belt, and generator efficiencies are 0.91, 0.95, and 0.86 respectively. If

the motor operates at a pf of 0.866 lagging, determine the current drawn.

A. 189 A

B. 195 A

C. 192 A

D. None of these

776. A single phase motor is connected across a 230 V, 60 Hz supply and

draws 30 A at 0.85 pf lagging. This motor drives a 120 V DC generator

through direct coupling. If the motor, coupling and generator efficiency are

0.85, 0.96 and 0.88 respectively, determine the current delivered by the

generator using the above condition.

A. 35 A

B. 32 A

C. 38 A

D. 48 A

777. A 230 V, 60 Hz, 3 phase motor drives a 25 kW, 250 V C generator

through belt and pulley. The motor and generator efficiencies are 0.90 and

0.88, respectively. If the motor draws a line current of 98 A at 0.85 pf lagging,

how much is the combined efficiency of the belt and pulley?

A. 95.12%
 B. 96.04%

C. 95.33%

D. 94.81%

778. A moving coil ammeter, a resistance of 1500 ohms and a diode are

connected in a series across a 125 V sinusoidal AC supply. The diode has a

linear current / voltage characteristics over the range I = 0, E = 0 V, to I = 200

mA, E = 200 V, calculate the power dissipated in the 1500 ohm resistor

A. 0.76 W

B. 0.83 W

C. 0.71 W

D. 0.86 W

779. A half wave rectifier draws power from a transformer at 24 volts and

delivers 200 mA to a load. Determine the power drawn by the load

A. 0.48 W

B. 1.25 W

C. 2.16 W

D. 2.05 W

780. An AC ammeter is connected in series across the output of a full wave

rectifier. This meter reads 8 A. If a moving coil ammeter is replaced instead of

the AC ammeter, what will be its expected reading?

A. 8.0 A

B. 7.6 A

C. 7.2 A

D. 5.6 A
781. In the electronic laboratory, a diode rectifier tube has a plate resistance

of 600 ohms (assumed constant) and is connected as a half wave rectifier to a

load resistance of 1400 ohms. The energizing supply voltage is 440 volts

effective, 60 Hz alternating current. Find the average load voltage.

A. 138.5 V

B. 132.8 V

C. 133.6 V

D. 150.2 V

782. Three identical transformers are used to supply power to an iodizing

plant requiring 1000 A at 28 V DC through a 3 phase half wave rectifier. The

transformers are connected delta-wye. What are the secondary current and

voltage of each transformer?

A. 1042 A, 28.47 V

B. 1017 A, 16.44 V

C. 1042 A, 16.44 V

D. 1017 A, 28.47 A

783. In the electronic laboratory, a diode rectifier tube has a plate resistance

of 600 ohms (assumed constant) and is connected as a half wave rectifier to a

load of 1400 ohms. The energizing supply voltage is 440 volts effective, 60 Hz

alternating current. Find the rms rectified current

A. 0.162 A

B. 0.155 A

C. 0.208 A

D. 0.311 A
 784. A resistor is connected across an AC supply of 220 volts. The power

drawn is 1000 watts. If a diode were connected in series with the resistor,

what would be the power absorbed by the resistor?

A. 850 W

B. 250 W

C. 750 W

D. 500 W

785. A circuit consist of a resistor that is connected in series with a perfect

diode. When connected across a 20 V battery the current measured is 10 A.

however, when connected across a 30 V battery but with reveresd polarity,

what would be the new current

A. 15 A

B. Zero current

C. 20 A

D. None of the answered listed

786. A germanium diode, which has an offset voltage of 0.2 V and an

incremental resistance of 20 ohms, is connected in series with a 10000 ohm

resistor across a 100 V DC source. What is the current?

A. 9.98 mA

B. 10 mA

C. 9.78 mA

D. 9.06 mA

ANSWEY KEY

762. C 764. D 766. A 768. B 770. C

763. A 765. C 767. C 769. A 771. D

 772. B 775. B 778. A 781. A 784. D

773. C 776. A 779. C 782. B 785. B

774. D 777. A 780. C 783. B 786. D

SOLUTION TO TEST 21

762.

763.
764.

765.

766.
767.

768.
769.

770.
771.

772.

773.

774.
775.

776.

777.

778.

779.
780.

781.

782.
783.

784.

785.

786.
 TRANSMISSION LINES

Inductance of a Single Phase Two Wire Line

Where: L = inductance (henry/meter)

d = distance between conductors (meter0

r = radius of conductor

r’ = 0.7788r

Inductance of Composite Conductor Lines

Where: Dmxy = geometric mean distance (GMD) between conductors x and y

 Dsx = self GMD between strands of conductor x

Dsy = self GMD between strands of conductor y

Ltotal = total inductance of the transmission line (henry/meter)

Note:

Geometric Mean Distance for Various conductor Setup

Solid wire radius

Two round wires of distance d

A point line of area inside a circle of radius R

Equally spaced points in a circle of radius R

Where: n = number of points

Average Inductance per Phase of a 3 Phase Transmission Line

Where: Dm = mutual GMD

Ds = self GMD

DAB = GMD of all conductors between lines A and B

DBC = GMD of all conductors between lines B and C

DCA = GMD of all conductors between lines C and A

DAA = GMD of all conductors in line A

DBB = GMD of all conductors in line B

DCC = GMD of all conductors in line C

Single circuit transmission line

Where: dab = distance between conductors a and b

dbc = distance between conductors b and c

dca = distance between conductors c and a

r = radius of each conductor

double circuit transmission line

Line to Line Capacitance of a Single Phase Two Wire Line

Where: C = capacitance (farad per meter)

∑0 = permittivity of medium (8.85 x 10-12 farad/meter)

r1 = radius of the conductor 1

r2 = radius of conductor 2

if r1 = r2 = r:

Capacitance to Ground of a Single Phase Two Wire Line

Note: capacitance to ground is equal to twice the line to line capacitance

Where: Cn = line to ground capacitance (farad per meter)

Capacitance to ground of a Three Phase Transmission Line

Neglecting ground effect

Where: Dm = mutual GMD

Ds’ = self GMD

Note: Ds’ is similar to Ds in the inductance formula. EXCEPT that each ds is to be

replaced by “r” instead of 0.7788r

With ground effects included

Short Transmission Lines

A transmission line is classified a short line, if the length does not exceed 50 miles

Equivalent circuit per phase:

Where: Es = sending end voltage per phase (volt)

Er = receiving end voltage per phase (volt)

Ir = receiving end current per phase (ampere)

Is = sending end current per phase (ampere)

RL = resistance of the transmission lines per phase (ohm)

XL = reactance of the transmission line per phase (ohm)

Z = impedance of the transmission line

+ θr = if pf of the receiving end is leading

- θr = if pf of the receiving end is lagging

Θs = sending end power factor angle

Note: the sign of θs is dependent of the result after simplifying the right side of the

equation

Medium Transmission Lines

A transmission line is classified a medium line, if its length is more than 51 miles but

less than 150 miles

Nominal T equivalent circuit per phase

Where: Z = impedance of the transmission lines per phase

Y = admittance of the transmission lines per phase

Bc = susceptance of the transmission line per phase

j = symbol for an imaginary component

Note: all operations (add, subtract, multiply and divide) for I r and Er equations above

are to be done using rules in complex operations

Nominal-pi equivalent circuit per phase

Long Transmission Line

A transmission line is classified a long line, if its length is more than 150 miles

Equivalent circuit per phase

Where: Z0 = characteristic impedance

δ ℓ = propagation constant

ℓ = length of transmission line

Transmission Line Regulation

Transmission Line Losses and Efficiency

Where: η = transmission efficiency

IL = line current

Ps = sending end power

Pr = receiving end power

Plosses = power loss

 TEST 22

787. A solid round copper wire has a diameter of 0.5 inch. Determine its self

GMD

A. 0.3894 inch

B. 0.1947 inch

C. 0.1825 inch

D. 0.25 inch

788. Determine the mutual GMD of a three phase single circuit transmission

line whose conductors arrange in a triangular formation so that the two

distances between conductors are 20 ft and the third is 38 ft, respectively

A. 24.77 ft

B. 25.35 ft

C. 23.67 ft

D. 26.43 ft

789. A three phase double circuit line has a horizontal spacing of 40 ft and a

vertical spacing between adjacent levels of 25 ft. determine the mutual GMD of

the line

A. 43.08 ft

B. 42.64 ft

C. 41.42 ft

D. 40.56 ft

790. A 230 kV transmission line is 100 miles long. The conductor is ACSR of

1113000 CM. The conductors are horizontally arranged with 20 ft spacing. The
 resistance per mile is 0.0969 ohm and its GMR is 0.0435 ft. What is the

impedance of the line?

A. 9.69 + j 95.25 ohms

B. 3.23 + j 95.25 ohms

C. 9.69 + j 77.19 ohms

D. 3.23 + j 25.93 ohms

791. A 34.5 kV feeder line is 5 miles long. The conductors are space 4 feet

horizontally. The conductor is 4/0 copper with GMR of 0.01668 ft. What is the

reactance?

A. 2.36 ohms

B. 6.72 ohms

C. 3.46 ohms

D. 5.16 ohms

792. A single phase transmission line is 15 km long using copper conductors of

diameter of 0.8 cm. If the distance between conductors is 1.25 cm, determine

the self-inductance of the transmission lines.

A. 0.036 H

B. 0.024 H

C. 0.072 H

D. 0.055 H

793. A 5 km long, three phase line has a horizontal configuration of 4 ft

spacing. The conductor is 336.4 MCM ACSR with GMR of 0.0244 and a

resistance of 0.306 ohm per mile. What is the impedance?

 A. 2.22 cis 65

B. 1.19 cis 46

C. 6.66 cis 65

D. 3.57 cis 46

794. A 170 mile, 230 kV, 60 Hz three phase single circuit transmission line

uses a triangular arrangement with 20 ft, 20 ft, and 36 ft spacing respectively. If

the line conductors have a GMR of 0.0217 ft, determine the capacitive

susceptance to neutral per mile

A. 4.81x10-6 mho per mi

B. 12.74x10-6 mho per mi

C. 7.92x10-6 mho per mi

D. 2.47x10-6 mho per mi

795. A single circuit, 3 phase, 60 Hz transmission is using a horizontal

arrangement with a spacing distance of 4 m between adjacent conductors. If

each conductor has an outside diameter of 0.8 cm, determine the capacitance

to neutral per meter

A. 8.352 pF/m

B. 7.793 pF/m

C. 6.742 pF/m

D. None of these

796. A single phase transmission line has total impedance of 1.5 + j 0.3 ohms.

It delivers 3 MW at 11 kV and at unity power factor. Determine the sending end

voltage of the transmission lines

 A. 11.41 kV

B. 11.24 kV

C. 12.02 kV

D. 11.89 kV

797. A single phase transmission line has total impedance of 5 cis 60 ohms

and supplies a total load of 120 A, 3.3 kV and at 0.8 power factor lagging.

Calculate the sendning end voltage

A. 3.93 kV

B. 3.62 kV

C. 3.54 kV

D. 3.86 kV

798. A 3 phase, 3 wire, shart transmission line has a resistance of 3 ohms and

a reactance of 8 ohms per wire. At the receiving end, a balanced 3 phase load

draws a lie current of 60 A, at 13400 volts line to line, 0.9 power factor lagging.

Determine the voltage at the sending end

A. 14.156 V

B. 14.143 V

C. 14.230 V

D. 15.055 V

799. A load of 12 MVA, o.8 pf lagging, 22 kV is served by a transmission line

which has a line resistance of 3 ohms and a line reactance of 10 ohms. Solve

for the sending end voltage

A. 24.345 V
 B. 26.795 V

C. 23.335 V

D. 25.422 V

800. A short 3 phase, 3 wire line has a resistance of 5 ohms and reactance of

12 ohms per wire and transmit power to a 3 phase load drawing 1000 kW at

13120 volts line to line, 0.8 pf lagging, 60 Hz. Solve for the sending end voltage

A. 14200 V

B. 14330 V

C. 14130 V

D. 14240 V

801. A 3 phase line has a reactance of 4.32 ohms and a resistance of 4.15 ohms. The
load at the receiving end is 3800 kW at 75% - power factor lagging and the voltage at
the sending end is 36 kV. Determine the voltage at the receiving end.
A. 34.24 kV

B. 34.86 kV

C. 35.14 kV

D. 35.45 kV

802. A short 230 kV transmission line has impedance of 5 cis 78 ohms. The sending

end power is 100 MW at 230 kV and 85% power factor. What is the voltage at the other

end?

A. 225.4 kV

B. 226.3 kV
 C. 223.2 kV

D. 228.2 kV

803. A three phase transmission line, 15 km long serves a substation rated 15 MVA at

34.5 kV, 60 Hz. If the line resistance is 0.12 ohm per kilometer and the line reactance is

0.457 ohm per kilometer, what should the sending end voltage be so that the

transformer can be fully loaded at its rated voltage and unity pf.

A. 37,200 V

B. 36,500 V

C. 35,408 V

D. 34,990 V

804. A three phase transmission line, 10 km long delivers a load of 5000 kW at 11 kV

and 0.8 pf lagging at the receiving end. The resistance of the line per km per phase is

0.1 ohm and the reactance per phase per km is 0.2 ohm. Solve for the regulation of the

line.

A. 12.44%

B. 11.05%

C. 10.45%

D. 10.12%

805. A 3 phase, 3 wire short transmission line having an impedance of 3.6 + j16 ohms

per wire is used to supply an inductive load of 100 A at 0.707 pf and a capacitive load of
50 A at 0.50 pf. The receiving end voltage is 4150 volts per phase. Find percent

regulation.

A. 25.46%

B. 20.33%

C. 26.34%

D. 23.71%

806. It is desired to deliver 4,000 kW, three phase at a distance of 25 miles. The load

voltage being 33 kV, 60 Hz and the power factor of the load being 85% lagging. The

reactance of the line per phase is 0.692 ohm per mile. The line loss is 10% of the power

delivered. Determine voltage regulation of the line.

A. 11.2%

B. 12.3%

C. 13.2%

D. 14.8%

807. A short 230 kV transmission line has an impedance of 5 cis 78 ohms. The sending

end power is 100 MW at 230 kV and 85% power factor. What is the percent regulation

of the line?

A. 3.6%

B. 1.5%

C. 2.2%
 D. 0.77%

808. A short sub-transmission line serves at its end an induction motor rated 500 HP,

0.88 pf, 0.90 efficiency, at 2,400 volts phase to neutral. If the transmission line has a

resistance of 1.5 ohms and a reactance of 2.4 ohms per phase, solve for the voltage

regulation of the line.

A. 6.77%

B. 7.02%

C. 6.48%

D. 6.25%

809. A short 3 phase, 3 wire transmission line has an impedance of 2 + j6 ohms per

wire, at the receiving end are connected a 3 phase inductive load drawing 5,000 kW at

0.8 pf, line to line voltage of 13,800 V and a capacitor bank drawing 200 A line current.

Solve for the power at the sending end.

A. 5,562 kW

B. 5,146 kW

C. 5,361 kW

D. 5,274 kW

810. A short 3 – wire transmission line has an impedance of 2 = j5 ohms per wire. At the

receiving end, a balanced 3 phase load and capacitor bank draw 3000 kVA, 0.71 pf
lagging and 600 kVAR respectively at 8000 volts per phase to neutral. Determine the

power loss of the transmission line.

A. 81.32 kW

B. 69.57 kW

C. 90.74 kW

D. 71.09 kW

811. A 10 lm, three phase transmission lie delivers power to a load rated 200 kW, 6.9

kV and at 80% lagging power factor. The resistance and reactance of each line are 0.8

and 1.2 ohms, respectively. What percentage of the power generated is loast in the

transmission line?

A. 9.53%

B. 8.05%

C. 8.22%

D. 7.46%

812. Each conductor of a three, phase, 3 – wire transmission lone has impedance of 15

+ j20 ohms at 60 Hz. The voltage between line conductors at the sending end is 13,200

volts. The load connected to this line is balanced and takes 1000 kW at a lagging power

factor. The current per conductor is 70 A. what is the load power factor?

A. 0.801 lagging

B. 0.824 lagging
 C. 0.850 lagging

D. 0.815 lagging

813. A 15 MW, 132 kV, 80% pf three phase load is t be serve by a transmission line

having conductors whose resistance is 0.5 ohm/km. if the losses on the line shall not

exceed 4.5%, how long must this line be?

A. 66 km

B. 70 km

C. 66 km

D. 75 km

814. A 3 phase, 3 wire transmission line supplies at the receiving end an inductive load

of 5,000 kW at 0.8 pf and the line to line voltage of 13,250 V and in addition a capacitor

bank that draws a line current of 90 A. the effective impedance of the transmission line

is 2 + j3 ohms per wire. Determine the sending end power.

A. 5317 kW

B. 5530 kW

C. 5255 kW

D. 5410 kW

815. A short 3 phase, 3 wire line has a resistance of 5 ohms and reactance of 12 phms

per wire and transmit power to a 3 phase load drawing 1000 kW at 13,120 volta line to

line, 0.8 pf lagging, 60 Hz. Solve for the sending end power factor.
 A. 0.755 lagging

B. 0.745 lagging

C. 0.754 lagging

D. 0.773 lagging

816. A short 3 phase transmission line has a resistance of 3 ohms and in inductive

reactance of 4 ohms. At the receiving end, voltage is 13,250 volts line to line, with a

load which draws 200 A at 0.707 lagging power factor and a capacitor bank drawing 96

A. solve for the power factor at the sending end.

A. 0.965 lagging

B. 0.902 lagging

C. 0.928 lagging

D. 0.935 lagging

817. The sending end voltage of a balanced 3 phase transmission line is 8410 volts,

phase to neutral. The line current is 200 amperes with a sending end lagging power

factor of 0.803. The receiving end voltage is 7600 volts, phase to neutral, with the line

current having a lagging power factor 0.85. Solve for the impedance of the transmission

line.

A. 1.47 + j5.15 ohms

B. 1.42 + j5.15 ohms

C. 1.47 + j5.04 ohms

 D. 1.42 + j5.04 ohms

818. A short, 3 phase, 3 wire transmission lie has a receiving end voltage of 4160 V

phase to neutral and serving a balanced 3 phase load of 998,400 volt – amperes at 0.82

pf lagging. At the sending end the voltage is 4600 V, phase to neutral and the pf is 0.77

lagging. Solve the resistance of the line.

A. 1.345 ohms

B. 1.462 ohms

C. 1.457 ohms

D. 1.635 ohms

819. At the sending end of a 3 phase transmission line, the voltage is measured to be

2.540 volts phase to neutral and the line current to be 60 A at a lagging power factor of

0.75. At the receiving end, the voltage measured is 2.200 volts phase to neutral and the

power factor is 0.80, likewise lagging current. Solve for the resistance and reactance of

the line.

A. 2.2 + j4

B. 2.4 + j6

C. 2.0 + j5

D. 2.1 + j3

820. A three phase transmission line 5 km long delivers 2 MVA at a power factor of 0.80

lagging. The resistance and reactance per km of each conductor are 0.3 ohm and 0.6
ohm, respectively. Calculate the voltage at the sending end. Assume a transmission line

loss of 7.2% of the power delivered to the load.

A. 4405.45 V

B. 4166.67 V

C. 4810.50 V

D. 4652.85 V

821. A certain station in Luzon has 36 kV, 3 phase, is to supply 12 MW load at 30 kV

and 0.8 power factor lagging over a 3 phase transmission line. Find the resistance of

the line if the length of the transmission line is 4,000 meters and the efficiency is 90%.

A. 5.33 ohms

B. 4.45 ohms

C. 6.31 ohms

D. 3.56 ohms

822. A three phase, 3 wire transmission line has an impedance per wire of 3 + j7 ohms,

the receiving end load is 950 Kw, 0.65 pf lagging with the line voltage of 13,200 V.

Determine the efficiency of the line.

A. 92.64%

B. 95.21%

C. 90.24%
 D. 93.05%

823. A short line has a resistance of 4 ohms and a reactance of 12 ohms per wire and

transmits power to a concentrated load of 1000 kVA, 13,200 volts, 3 phase, 60 Hz, 0.8

pf inductive load. Find its efficiency.

A. 93.30%

B. 96.95%

C. 95.75%

D. 97.21%

824. A 230 kV transmission line is sending 100 MW power at 230 kV and 90% power

factor. The impedance is 5 + j20 and its capacitive reactance is 2500 ohms. Determine

the receiving end voltage.

A. 221.72 kV

B. 222.83 kV

C. 226.15 kV

D. 224.28 kV

825. A 3 phase, 60 Hz transmission line delivers 20 MVA to a load at 66 kV at 80% pf

lagging. The total series impedance of each line is 15 + j75 ohms. If a nominal “pi”

circuit is used, what would be the transmission efficiency if the admittance is j0.0006

ohms?

A. 90.8%
 B. 91.7%

C. 93.5%

D. 92.6%

826. A 230 kV transmission line has impedance of 50 cis 78 ohms and a capacitive

reactance of 1200 ohms. If transmits the power of a base load plant. On a certain dry

season the sending end power. Is 100 MW at 235 kV and 95% power factor

continuously for a period of one month. If cost of generation is 1.30 pesos per kW-hr,

what is the cost of the line losses for the one month period?

A. P 565,000

B. P 12.2 million

C. P 5.6 million

D. P 2.3 million

ANSWER KEY

787. B 795. B 803. C 811. B 819. B

788. A 796. A 804. C 812. A 820. D

789. D 797. D 805. D 813. B 821. A

790. C 798. A 806. A 814. A 822. A

791. C 799. B 807. D 815. D 823. D

792. A 800. A 808. A 816. D 824. B

793. A 801. C 809. D 817. C 825. A

794. A 802. D 810.D 818. D 826. D

SOLUTIONS
 POWER FACTOR CORRECTIONS

TYPICAL LOADS WHICH OPERATE ON LOW POWER FACTOR

 Arc lamps
 Induction type AC motors
 Industrial heating furnaces

SOME UNWANTED EFFECTS WITH LOW POWER FACTOR

 For a given load, the current will increase which means larger size of wire is needed. Also it
increases the losses and decreases the efficiency of the system.
 Generators, transformers, switches and transmission conductors become overloaded due to
high current.
 Voltage drop in transmission lines increases due the increases in current.

METHODS USED TO CORRECT LOW POWER FACTOR

 Using a bank of static condensers (capacitors) connected across the load.

 Using a synchronous condenser (a synchronous motor operated at a leading power factor)

connected across the load.
Where: Sold = old apparent power, when power factor is not yet corrected.

Snew = new apparent power, after power factor is corrected.

Ssyn = apparent power rating of the synchronous motor needed to correct the low power factor

Qc = reactive power rating of the static condensers needed to correct the low power factor

Pold = old active power before correction

Pnew = new active power after correction

cos = power factor before correction

cos = power factor after correction

cos = power factor of the synchronous motor

827. A 132 kV line three phase system delivers 70.7 MVA of a balanced delta load of power factor 70.7%
lagging. Determine the reactance necessary to attain unity power factor.

A. Xc = 1,092 ohms

B. Xc = 965 ohms

C. Xc = 1,142 ohms

D. Xc = 1,045 ohms

828. A single-phase inductive load takes 50 kVA at 0.60 power factor lagging. Solve for the kVAR of a
capacitor required to improve the power factor 1.0.

A. 30 kVAR

B. 20 kVAR

C. 22.5 kVAR

D. 40 kVAR

829. A single – phase load on 220 V takes 5 kW at 0.6 lagging power factor. Find the kVAR size of
capacitor, which maybe connected in parallel with this motor to bring the resultant power factor to 1.0.

A. 6.67

B. 7.32

C. 8.66
 D. 6.26

830. A 5 hp, 220 V, 60 Hz, single – phase induction motor operates at an efficiency and power factor of
0.88 and 0.8 respectively. What capacitance should be connected across the motor in order for the
feeder supplying this motor to operate at unity power factor?

A.

B.

C.

D.

831. Installed in one of the customer of CEPALCO are two single phase transformers each rated 75 kVA
are connected kVA are connected V or open delta to serve a 3 – phase load of 120 kW at 0.8 pf lagging.
To prevent the overloading of the transformers, determine the size of the capacitor in kVAR.

A. 40

B. 41

C. 39

D. 42

832. Three transformers each rated 100 kVA are connected delta supplying a load of 160 kW at 0.8 pf
lagging. One of the transformers is taken for repair and the rest are connected open delta. What kVAR
(minimum) of capacitor must be connected with the load so that the load of the remaining transforers
will be 95% of their combined rated capacities.

A. 85. 32

B. 81.62

C. 87.58

D. 80.92

833. Three – single phase transformers each rated 75 kVA are banked in delta and supplying a 3 – phase
load drawing 160 kVA at 0.8 lagging power factor. If one transformer is removed for repairs, solve for
the minimum amount in kVAR of a capacitor needed to prevent overloading of the remaining units.

A. 70.32

B. 73.64

C. 72.46

D. 73.28
834. Two single – phase transformer each rated 150 kVA are connected open delta supplying a three –
phase induction motor rated 250 HP, 0.7 pf and 80% efficiency. Determine the minimum size in kVAR of
a capacitor needed to prevent overloading the transformers.

A. 135

B. 126

C. 120

D. 123

835. Two single – phase transformers are each rated 75 kVA are connected in V or open delta to serve a
3 – phase load of 120 kW at 0.80 power factor lagging. Determine the size in kVAR of the capacitor
needed to prevent overloading of the transformers.

A. 40.25

B. 41.28

C. 45.24

D. 43.50

836. A plant has a load of 290 kW with an average power factor of 70%. The owner requests you to
correct the power factor to reduce its power consumption. How much capacitor kVAR is required to
increase the power factor to 90%?

A. 152.46

B. 155.39

C. 150.34

D. 154.58

837. A 150 – kVA – transformer bank will serve a load expected to draw 135 kW at 0.80 lagging power
factor. Solve for the size of the capacitor bank needed to be added in order to prevent overloading of
the transformer bank.

A. 32.506 kVAR

B. 35.866 kVAR

C. 40.391 kVAR

D. 28.266 kVAR

838. A 3- phase generator has the following 3 – phase loads: an inductive load drawing 400 kVA at 0.60
power factor and a resistive load drawing 80 kVA at 1.00 power factor. Solve for the size in kVAR of the
capacitor bank needed to improve the power factor of the combined loads to 0.85 lagging.

A. 120.58 kVAR
 B. 121.68 kVAR

C. 124.54 kVAR

D. 122.82 kVAR

839. A load of 10,000 kVA, 80% pf lagging is connected to a 13,200 volts line. How much capacitive
reactive power is needed to correct the power factor to 0.97 lagging?

A. 5,156 kVAR

B. 3,138 kVAR

C. 2,547 kVAR

D. 4,395 kVAR

840. A short, 3 – phase, 3 – wire transmission line has a receiving end voltage of 4160 V phase to neutral
and serving a balanced 3 – phase load of 998,400 volt – amperes at 0.82 pf lagging. At the receiving end
the voltage I s4600 V, phase to neutral and the pf is 0.77 lagging. Solve for the size in kVAR of a capacitor
needed to improve the receiving end pf to 0.9 lagging maintaining 4160 V.

A. 181

B. 175

C. 172

D. 178

SOLUTIONS
 841. A three-phase, 3-wire transmission line has an impedance per wire of 3 + j7 ohms, the
receiving end load is 1950 kW, 0.65 pf lagging with the line voltage of 13,200 V. Determine the
kVAR of the capacitor to be connected at the receiving end to make the pf at that end to 0.8
lagging.
a. 824.56
b. 871.45
c. 803.88
d. 817.32

Solution:

Note: Refer to the vector diagram of problem #838.

842. A balanced, 500 kVA, 3-phase, 440 volt, 60 Hz, inductive load operates at a pf of 75%.
Determine the total capacitor kVAR required improving the pf to 95%.
a. 207.46
b. 176.42
c. 210.75
d. 192.21

Solution:
 843. A single-phase induction motor is rated 5 hp, 75% power factor and 220 volts. What
approximate size of capacitor size of capacitor is necessary to raise the power factor to about
95%?
a. 3 kVAR
b. 2 kVAR
c. 2.5 kVAR
d. 3.5 kVAR

Solution:

Note: Refer to the vector diagram of problem #842. Since efficiency of the motor is not given, assume
the given power rating (output) equal to the input power drawn.

844. A balanced 3-phase load draws 150 A phase current at 7.5 kV phase to neutral, 0.891
power factor lagging. It is desired to raise the power factor to 0.96 leading. Solve for the amount
of capacitor kVAR needed to achieve such pf.
a. 2273 kVAR
b. 2409 kVAR
c. 2509 kVAR
d. 2365 kVAR

Solution:
 845. A 3-phase, 3-wire, short transmission line has a resistance of 3 ohms and a reactance of
9 ohms per wire. At the receiving end, a balanced 3-phase load draws a line current of 60 A, at
13, 500 volts line to line, 0.90 power factor lagging. Assuming the receiving end voltage is
maintained at 13,500 V, solve the size in kVAR of capacitors needed to raise the power factor at
the receiving end to 0.95 leading.
a. 1043.5
b. 1154.2
c. 1026.5
d. 1232.2

Solution:

846. The input to an induction motor from a 13 kV, 60 Hz line is 1000 kVA, at 0.8 pf lagging. A
capacitor is placed in parallel with the motor to improve the pf. Calculate the capacitance
required raising the power factor to 0.9 leading.
a. 62 µF
b. 50 µF
c. 43 µF
d. 56 µF

Solution:
 C 50 µF

847. A three-phase balanced load draws a line current of 80 A at 0.90 lagging power factor.
Solve the minimum size in kVAR of the capacitor bank needed to raise the power factor to 0.95
leading if the line to line voltage is 13,200 volts.
a. 1310.15
b. 1338.25
c. 1247.54
d. 1430.12

Solution:

Note: Refer to the vector diagram of problem #846.

848. Two Y-connected, 50 rise induction motors are fed by a 4160 V, line to line, 3-phase 60
Hz motor-control center 20 feet away. Motor #1 drives a 600-hp compressor. The efficiency of
this motor is 90% and its power factor is 0.5. Instruments of motor #2 indicate 1730 kW, 277
amperes. Determine the capacity in microfarads per phase of wye-connected bank that is
required to correct the power factor of the total load to 0.966 lagging.
a. 172.4 µF
b. 193.8 µF
c. 167.2 µF
d. 182.1 µF

Solution:
 849. A 2.3 kV three-phase system supplies a 120-kW, 0.6 pf lagging balanced load. Determine
the capacitance in each phase of a wye-connected capacitor bank to adjust the power to 0.90
lagging.
a. 51.1
b. 52.2
c. 62.5
d. 78.2

Solution:

850. A single-phase, 60 Hz, 5 hp squirrel cage induction motor draws a current of 53 A at 117
V. If it has a 78.5% electrical to mechanical conversion efficiency, what capacitance should be
 connected at the terminals of the motor in order to increase the power factor of the load
combination to 92%?
a. 480
b. 380
c. 320
d. 420

Solution:

851. A three-phase, 60 Hz, 2200 volts induction motor develops 500 HP, 0.8 lagging pf and
efficiency of 94%. The power factor is raised to 0.90 lagging by connecting a bank of condensers
in delta across the lines. If each of the capacitance unit is built up of four similar 550 V
condensers, calculate the required capacitance of each condenser.
a. 77.04
b. 75.42
c. 76.12
d. 72.30

Solution:
 852. A star-connected 400 Hp (metric), 2000 V, 50 c/s motor works at a power factor of 0.7
lagging. A bank of mesh-connected condensers are used to raise the power factor to 0.93
lagging. Calculate the capacitance of each unit required if each is rated 500 V, 50 c/s. The motor
efficiency is 85%.
a. 194
b. 225
c. 302
d. 233

Solution:
 853. A factory draws a lagging load of 2000 kW at a power factor of 60% from a 6 kV bus line.
A synchronous capacitor is installed to raise the overall power factor to raise the overall power
factor to unity. Assuming the synchronous capacitor losses are 275 kW, calculate the operating
power factor of the synchronous capacitor.
a. 0.201 leading
b. 0.103 leading
c. 0.302 leading
d. 0.113 leading

Solution:

By cosine law:

854. A 400-V three-phase balanced load takes 40 A at a lagging power factor of 0.8. An over-
excited synchronous motor is connected to raise the power factor to unity. If the mechanical
output of the motor is 15 hp and its efficiency is 85%, find the kVA input to the motor.
a. 24.2 kVA
b. 18.7 kVA
c. 20.3 kVA
d. 21.2 kVA

Solution:
By cosine law:

855. A three-phase load of 100 kVA operates at 0.707-pf lagging. Solve for the operating
power factor of a synchronous condenser necessary to raise the system power factor to 0.866
lagging, and so arrange that the system apparent power is the same as before the correction.
a. 0.632 leading
b. 0.882 leading
c. 0.705 leading
d. 0.609 leading

Solution:

By cosine law:

856. An industrial plant has an electrical load of 5000 kW at 80% pf lagging. It has been
decided to replace a 500-hp induction motor that drives a pump. This motor operates at an
efficiency of 90% and a pf of 0.9 lagging. If a synchronous motor is purchased as a replacement,
 which is capable of operating at 0.80 pf leading. What will be the new plant pf. Assume the
synchronous motor to have the same efficiency.
a. 0.863
b. 0.823
c. 0.837
d. 0.852

Solution:

For the induction motor:

For the synchronous motor:

= (5000 – j 3750) – (388.54 – j 188.54) + 388.54 + j 291.39

 = 5000 – j 3270.45 = 5974.59 - 33.188

857. A synchronous motor is drawing 60 kW is connected in parallel with a load drawing 250
kW at a lagging power factor of 0.8. If the combines load has a power factor of 0.9, at what
power factor is the synchronous motor operating?
a. 0.862 leading
b. 0.849 leading
c. 0.868 leading
d. 0.874 leading

Solution:

Using cosine law:

858. An inductive load consumes 10 kW at 0.75 pf lagging. A synchronous motor with a pf of

0.9 leading is connected in parallel with the inductive load. What is the minimum required kW
size of the synchronous motor so that the combined load will have a pf of 0.8 lagging.
a. 1.068 kW
 b. 1.203 kW
c. 1.075 kW
d. 1.109 kW

Solution:

Note: Refer to the vector diagram.

Using sine law:

859. An industrial plant draws 500 kW at 0.6 power factor from a 3-phase system. In order to
raise the power factor to 0.866 lagging and to supply needed additional power, a synchronous
motor is added. This motor draws 300 kW, bringing the new total plant load to 800 kW.
Neglecting the losses of the synchronous motor, calculate its exact required kVA rating.
a. 363.24 kVA
b. 345.34 kVA
c. 393.34 kVA
d. 307.35 kVA

Solution:

Note: Refer to the vector diagram.

Using cosine law:

860. An induction motor load of 1500 kW consists of several units in parallel operating at an
average power factor of 0.80 lagging. In order to improve the power factor, a portion of the
same efficiency as the induction motor loads is to be replaced by a synchronous motor,
operating at the same efficiency as the induction motors and at a power factor of 0.70 leading.
Find the kVA rating of the synchronous motors and at a power factor of 0.70 leading. Find the
kVA rating of the synchronous motor required bringing the power factor of the total load to 0.90
lagging. Assume the induction motor load, which has to be replaced, operates at the same pf as
the induction motor group.
a. 332 kVA
b. 325 kVA
c. 300 kVA
d. 322 kVA

Solution:
Equate coefficients of j:

861. An alternator rated 530-kVA, is operating at 0.60 pf lagging. A synchronous condenser is

in parallel to improve the pf to 90% lagging. Determine the operating power factor of the
synchronous condenser. Assume the alternate is not supposed to be overloaded.
a. 0.546 leading
b. 0.447 leading
c. 0.643 leading
d. 0.593 leading

Solution:

Note: Refer to the vector diagram. Assume the total kVA load is
equal to the kVA rating of the alternator. The triangle as shown
is therefore an isosceles triangle since
 862. An over-excited synchronous motor is connected across a 150 kVA, 0.70 lagging power
factor load. The motor takes 12 kW while running on no-load. Calculate the kVA rating of the
motor required in order to bring the overall pf of the motor-inductive load combination to unity.
a. 106.22
b. 107.78
c. 110.20
d. 105.58

Solution:

Note: An over-excited synchronous motor is operating at a leading pf. Refer to the vector diagram.

Using cosine law:

863. An industrial load takes 250 kW at 60% pf from a 600 V, 60 Hz, 3-phase feeder. It is
desired to raise the pf of the entire feeder to 90% by means of a synchronous motor, which at
the same time is to drive a dc compound generator, requiring that the synchronous motor takes
70 kW from the line. Determine the required current rating of the synchronous motor.
a. 175.53 A
b. 184.37 A
c. 192.65 A
d. 188.44 A

Solution:
Using cosine law:

864. An existing industrial plant has an average load of 900 kW at 0.6 pf lagging. To raise the
overall power factor to 0.92, a synchronous motor driving a DC generator is to be installed. If the
input of the synchronous motor will be 250 kW, calculate its kVA input rating.
a. 753. kVA
b. 788 kVA
c. 723 kVA
d. 715 kVA

Solution:

FAULTS ON ELECTRICAL SYSTEM

SYMMETRICAL COMPONENTS

An unbalanced three – phase system vectors can be broken down into three groups of balanced
vectors, called the symmetrical components of the given unbalanced vectors.

Example: Given three unbalanced vectors Va, Vb and Vc and a phase sequence of a- b – c

POSITIVE SEQUENCE COMPONENTS

 Three equal vectors whose phse sequence is the same as the original sequence of the
unbalanced system of vectors. (It uses subscript 1)

NEGATIVE SEQUENCE COMPONENTS

Three equal vectors whose phase sequence is opposite of the original sequence of the
unbalanced system of vectors. (It uses subscript
2)

ZERO SEQUENCE COMPONENTS

Three vectors which are equal and in phase. (it uses subscript 0)

GENERAL FORMULAS FOR SYMMETRICAL COMPONENTS

PER UNIT IMPEDANCE USING A DIFFERENT POWER & VOLTAGE BASE

The numerical per unit of any quantity is its ratio to the chosen base quantity of the same
dimensions.
FAULT

Fault is defined as any connection or situation that causes an unbalanced among the three phases.

 The fault point of a system or network is that point to which the unbalanced connection is
attached in an otherwise balanced system

THE SEQUENCE NETWORK

A sequence network is a copy of the original balanced system to which the fault point is
connected and contains the same per phase impedances as the physical balanced system, arranged in
the same way. The only difference being that the value of each impedance is a value unique to each
sequence.
SINGLE – LINE TO GROUND (SLG) FAULT

LINE TO LINE (LL) FAULT

DOUBLE LINE TO GROUND (2LG) FAULT

THREE PHASE FAULT OR THREE LINE TO GROUND FAULT

THREE PHASE FAULT CALCULATIONS GIVEN A NETWORK

 Method I: kV – base method

Procedures:

 Draw the per phase diagram of the system

 Choose a common kV – base (Vc) and express all impedance on the selected kV – base.

 Calculate the total or equivalent impedance (Z total) using circuit principles.

 Calculate the fault current (If) using Ohm’s law.
  Evaluate the actual fault current using the relation

 Method II: kVA – base method

Procedures:

 Draw the per phase diagram of the system

 Express all impedances in percentage or per unit values
 Choose a common kVA – base and express all on the selected common kVA base.

 Calculate the total per unit impedance of the system using circuit principles.
 Calculate the fault power (kVAf) using the relation

 Evaluate the fault current (Ir) using the equation

APPROXIMATE EQUIVALENTS BETWEEN A LINE-TO-LINE FAULT AND A THREE PHASE FAULT ON AN
UNLOADED GENERATOR
 865. In symmetrical components, what is the vector sum of 1+a+ ?
a. 1
b. 0
c. -1
d. Infinity

Solution:

866. If the load of a wye-connected transformer are:

What is the phase b positive sequence component?

a. 13.4 cis (-32.2)

b. 10.2 cis 240
c. 12.27 cis 208.4
d. 12.27 cis (-31.6)

Solution:

867. Given three unbalanced three-phase voltages:

Determine
 a. 142.43 + j12.35
b. 135.32 – j21.34
c. 145.62 + j13.66
d. 140.23 – j9.32

Solution:

868. The three-phase unbalanced currents are:

Find the negative sequence current of phase a

a. 8.66 cis 30
b. 5.77 cis (-60)
c. -5.77
d. 5.77

Solution:
 869. Given the following currents:

Solve for the negative sequence component of

a. 8.641 – j1.543
b. 9.436 + j1.346
c. 9.751 – j1.464
d. 8.354 + j1.034

Solution:

870. The three-phase unbalanced currents are:

Find the zero sequence current

a. 3.33 cis 30
b. 0
c. 5.77
d. 3.33

Solution:
 871. Given the following currents:

Solve for zero sequence component of

a. 10 + j4
b. 8 – j6
c. -8 – j4
d. 12 – j6

Solution:

872. The sequence currents of phase a current are as follows:

Zero sequence current = 14.13 17.34

Positive sequence current = 2.98 10.06

Negative sequence current = 708.26 -31

Determine phase a current.

a. 720 -30
b. 730 -15.2
c. 710 88
d. 695 15.2

Solution:
 873. The sequence components of phase a current are:
Zero sequence component = 0.47 + j1.49
Positive sequence component = 18.4 cis (-31.6)
Negative sequence component = 3.23 cis 168.2

Determine the phase b current.

a. 18 cis 215
b. 15 cis 240
c. 19 cis 220
d. 20 cis 225

Solution:

874. The sequence components of phase a current are:

Zero sequence component = 0.47 + j1.49
Positive sequence component = 18.4 cis (-31.6)
Negative sequence component = 3.23 cis 168.2

Determine the phase c current

 a. 17.5 cis 91
b. 18 cis 216
c. 22.5 cis 82
d. 15 cis 100

Solution:

875. Determine the symmetrical components of the line current in line ‘a’ if one of the in
phase impedance of its delta-connected load connected across lines ‘ca’ is removed. The delta
load with impedance of 10 0 ohms per phase is supplied from a 220 volts, 60 cycle, 3-phase.
Assume a phase sequence of a-b-c.
a.
b.
c.
d.

Solution:
 876. A star-connected balanced load takes 75 A from a balanced 3-phase, 4-wire supply. If
the two supply lines of the fuses are removed determine the symmetrical components of the
line currents after the fuses are removed.
a.
b.
c.
d.

Solution:

877. A 50 MVA, 33 kV/11 kV, three-phase, wye-delta connected transformer has a 3%

impedance. What is the percent impedance at 100 MVA base and 34.5 kV base?
a. 1.639%
 b. 5.49%
c. 5.74%
d. 6.56%

Solution:

878. At a certain location of an electrical system, the available short circuit MVA is 10 at 110
kV while its Thevenin’s equivalent reactance is 0.05 pu. Determine the per unit reactance of this
point using a base 20 MVA and 115 kV?
a. 0.08
b. 0.07
c. 0.06
d. 0.09

Solution:

879. A 13.8 kV/440 V, 50 kVA single-phase transformer has a leakage reactance of 300 ohms
referred to the 13.8 kV side. Determine the per unit value of the leakage reactance for the
voltage base.
a. 0.074
b. 0.082
c. 0.083
d. 0.079

Solution:
 880. A 5 kVA, 2400 – 120/240 volt distribution transformer when given a short circuit test
had 94.2 volts applied with rated current flowing in the short-circuited wiring. What is the per
unit impedance of the transformer?
a. 0.0392 ohms
b. 0.086 ohms
c. 0.0415 ohms
d. 0.0435 ohms

Solution:

881. A 3-phase, 375 kVA, 480 V, 50 Hz, wye connected alternator has an equal positive and
negative sequence reactance of 10 %. Find the symmetrical fault current, if a 3-phase fault
occurs at the alternator terminals.
a. 4510.5 A
b. 4620.3 A
c. 4255.2 A
d. 4778.1 A

Solution:
 882. A generator rated 600 kVA, 2400 V, 60 cycles, 3-phase, 6-poles and wye-connected has
10% synchronous reactance. If a three-phase fault occurs, what will be the short circuit current?
a. 1443 A
b. 1532 A
c. 1435 A
d. 1428 A

Solution:

883. A 20 MVA, 13.8 kV, 60 Hz, three-phase synchronous turbo alternator has a positive,
negative and zero sequence reactances of 0.25, 0.35 and 0.15 respectively. If lines b and c are
short-circuited, determine the subtransient fault current in line b. Assume the alternator is
operating at no load and at rated voltage with the neutral of the alternator solidly grounded.
a. 2614 A
b. 2886 A
c. 2415 A
d. 2510 A

Solution:
 884. At a certain location in an electric system, the available fault MVA is 400 MVA. A 15
MVA, 34.5 kV/6.24 kV, 2.5% impedance, wye-wye grounded transformer is installed at that
location. Determine the short circuit MVA at the secondary side of the transformer.
a. 195 MVA
b. 150 MVA
c. 90 MVA
d. 240 MVA

Solution:
885. Two 3-phase transformers are connected in parallel at the primary as well as at the
secondary sides. One is rated 10 MVA, 34.5/13.8 kV and 4% impedance while the other is rated
7.5 MVA, 34.5/13.8 kV and 5% impedance. The primary tapping point has a 3-phase short circuit
MVA of 1000 MVA. Determine the fault current delivered to a 3-phase fault at the secondary
side bus bars.
a. 13,501 A
b. 10,452 A
c. 12,532 A
d. 11,953 A
Solution:

886. A 100 MVA, 22 kV synchronous turbo generator has positive and negative reactance of
0.20 p.u. and a zero sequence reactance of 0.05 p.u. The neutral of the generator is grounded
through a reactor of 0.242 ohm. Determine the ratio of the subtransient current for a single line
to ground fault to the subtransient current for a three-phase fault. Assume the generator is
operated without a load and at rated voltage.
a. 1.50
b. 1.24
c. 1.00
d. 0.80

Solution:
 887. A generator is rated 100 MVA, 15 kV, it is Y-connected, solid grounded and is operated
at rated voltage at no-load and is disconnected from the rest of the system. Its positive and
negative sequence reactance is 0.05 p.u. Calculate in ohms of inductive reactance to be inserted
in the neutral connection of the generator to limit the fault current for a single line to ground
fault to the fault current of a symmetrical three-phase fault.
a. 0.0233 Ω
b. 0.0225 Ω
c. 0.0376 Ω
d. 0.0325 Ω

Solution:
 888. The reactance of a three-phase alternator is 8 percent. If the alternator is rated 25 MVA
at 13.25 kV output voltage, line to phase, solve for the magnitude of the fault current generated
when a short circuit occurs between 2 phases at the terminals.
a. 6704 A
b. 6135 A
c. 6808 A
d. 6458 A

Solution:
 889. A three-phase, 375 kVA, 480 V, 50 Hz, wye connected alternator has an equal positive
and negative sequence reactance of 10%. Find the unsymmetrical fault current, if a 2-phase fault
(line to line) occurs at the alternator terminals.
a. 3890 A
b. 3906 A
c. 4510 A
d. 4180 A

Solution:
 890. A 5 MVA, 13.8 kV / 480 V, 5% impedance transformer is tapped at 13.8 kV line where
the Thevenin’s equivalent impedance is ½ ohm. Determine the fault current at the primary for a
three-phase fault at the secondary.
a. 10,500 A
b. 3,300 A
c. 4,200 A
d. 6,050 A

Solution:
 891. A 10 kVA, 110 V, 3-phase, 4-wire, 60 Hz alternator generates 70 volts per phase when
excited to give rated voltage at full load. The armature synchronous impedance per phase is 0.2
ohm. What is the current in each phase if the generator terminals are shprt-circuited?
a. 350 A
b. 875 A
c. 620 A
d. 534 A

Solution:

892. At a certain point of the system network the positive, negative and zero sequence
impedance are 0.25 p.u., 0.25 p.u. and 0.3 p.u. respectively. The base MVA is 100. The voltage
level at that point is 34.5 kV. Determine the zero sequence current for a one line to ground fault.
 a. 6275 A
b. 8132 A
c. 7516 A
d. 2091 A

Solution:

893. In a short circuit analysis, the positive, negative and zero sequence impedances are 0.20
pu, 0.20 pu and 0.25 pu, respectively, using a base MVA of 50 Estimate the fault current on the
faulted lines if a double line to ground fault at the 138 kV level occurs.
a. 1204 A
b. 1011 A
c. 1090 A
d. 1104 A

Solution:
 894. A 15 MVA, 6,600 V, 60 Hz, Y-connected synchronous alternator has a positive, negative
and zero sequence per unit reactance of 0.20, 0.20 and 0.10 respectively. The neutral of the
generator is grounded through a reactor with a per unit reactance of 0.05 based on the
generator rating. If a double line to ground fault occurs at the alternator terminals, estimate the
current that flows in the reactor.
a. 5920 A
b. 5623 A
c. 6125 A
d. 6342 A

Solution:
895. In a short circuit study, the positive, negative and zero sequence impedance are 0.25 pu
and 0.25 pu and 0.3 pu, respectively. The base MVA is 100. Determine the fault current for a
three-phase fault at the 115 kV level.
a. 3000 A
b. 2000 A
c. 2500 A
d. 3500 A
Solution:

896. A 3-phase 220-V, Y-connected alternator has a synchronous impedance of 0.15 + j2

ohms per phase. The alternator is connected through a short transmission line whose
impedance per wire is 2 + j1 ohms to a Y-Y connected transformer bank whose total equivalent
impedance referred to the secondary (high side) is 50 + j86.6 ohms. A three-phase load is
connected from the secondary side of the bank through a transmission line whose impedance is
50 + j75 ohms per wire. If a symmetrical three-phase fault occurs at the load side, how much is
the current will flow to the alternator windings. Assume the bank has a transformation ratio of
1:10
a. 22.73 A
b. 23.66 A
c. 21.51 A
d. 24.15 A

Solution:
 897. Three single-phase transformers each rated 50 kVA, 2400 volts primary, 277 volts
secondary, four (4) percent impedance have their primaries connected in delta and their
secondaries in wye. Calculate the fault current drawn if a short circuit occurs between two
phases at the secondary terminals.
a. 2260 A
b. 2585 A
c. 2036 A
d. 2256 A

Solution:
 898. La Tondeña Distillery Inc, located in Canlubang, Calamba, Laguna installed an
emergency 3-phase generator, 3-wire GM generator is rated 350 kVA, 460 volts, 60 Hz,
with a reactance of 8%. Solve for the symmetrical 3-phase short circuit.
a. 5,321 A
b. 5,703 A
c. 5,284 A
d. 5,491 A

Solution:

899. A 15 MVA, 34.5 kV/6.24 kV transformer is connected at an infinite bus. The percent
impedance of the transformer is 2.5%. What is the current at the 34.5 kV side for a three phase
short at the 6.24 kV side?
a. 55,500 A
b. 10,000 A
c. 5,000 A
d. 25,000 A
Solution:

900. A three-phase, 3-wire generator is rated 325 kVA, 480 volts, 60 Hz with a reactance of
eight (8) percent. Solve for the fault current delivered by the generator during a 2-phase short
circuit at the terminals.
a. 4232 A
b. 4462 A
c. 4012 A
d. 4156 A

Solution:
 ILLUMINATION

POINT BY POINT METHOD (two-dimensional phase)

Laws on illumination

 The illumination is directly proportional to the luminous intensity of the light source.

 The illumination varies inversely as the square of the distance from the source of light.

 The illumination varies directly as the cosine of the angle between the normal to the surface and

the direction of the direction of the incident light.

Note: Normal line is a line perpendicular to the surface considered incident light is the ray of light that

point of interest.

Where:
 Illumination (E) Candle Power (I) Distance (

Foot candle Candela Foot

Lux Candela Meter

phot candela centimeter

POINT

BY POINT

METHOD THREE-DIMENSONAL PLANE

Where:

x = length
 y = width

z = evaluation o the lamp from the x-y plane

ILLUMINATION FROM MORE THAN ONE LIGHT SOURCES

Where: Ep1, Ep2, Ep3 = illumination given by lamps 1, 2 and 3 respectively

VALUE OF MOUNTING HEIGHT “h” TO GIVE MAXIMUM ILLUMINATION ON A POINT (P) LOCATED “s”

DISTANCE FROM A POINT DIRECTLY BELOW

ZONAL CAVITY OR AVERAGE ILLUMINACTION METHOD

N = number of lamps

Cu = coefficient of utilization

Df = depreciation or maintenance factor

A = surface area illuminated

Illumination E Area (A)

Foot- candle ft^2

Lux m^2

phot Cm^2

Note: The values of Cu and Df are evaluated using standard graph in the electrical Engineering

Handbook. Usually in problem solving exercises, these values are always given (if not the question being

asked)
PROBLEMS

905. A piece of paper lies on table 2 m away from a point directly below a bulb of 100 cd and is 4m.

above the table. Calculate the illumination on the center of the paper in lux.

A. 5.2

B. 6.7

C. 4.5

D. 3.4

906. An unshaded lamp is 6m above a table. It is lowered down by 2m. By how much is the illumination

on the table increased?

A. 2.0 times

B. 2.25 times

C. 2.50 times

D. None of these

907. A medium unshaded lamp hangs 8 m directly above the table. To what distance should it be

lowered to increase the illumination to 4.45 times its former value?

A. 4.02 m

B. 3.86 m

C. 3.79 m

D. 4.21 m

908. An unshaded lamp is placed 95 cm from the screen of a photometer. If a glass is placed between

the screen and the lamp must be moved 5 cm closer to the screen to produce the same illumination as

before. The glass blocks what percent of the light produced by the lamp?
 A. 11.5 %

B. 10.2 %

C. 12.4 %

D. 9.08 %

909. A floodlight emitting 25,000 candelas in the center of its beam is aimed at 60 degrees to a point on

the ground 20 m away. The illumination of the point in lux is

A. 54.12

B. 62.5

C. 31.25

D. 625

910. An unknown lamp placed 6 m from a photometer screen provides the same illumination as a 90-

cd lamp placed 4 m from the screen. What is the candlepower of the unknown lamp?

A. 202.5 cd

B. 215.2 cd

C. 211.6 cd

D. 208.4 cd

911. Two lamps A and B having intensities of 300 cp and 500 cp respectively are situated 12 ft apart A

screen id placed between them in order that the illuminations on any sides are equal. How much is this

illumination?

A. 11.45 fc

B. 10.92 fc

C. 12.45 fc
 D. 13.15 fc

912. A light is to be placed on a wall on order to obtain maximum brightness of illumination. To achieve

this brightness, how high on the wall should this light bulb be placed to a point on the floor that is 3.6 m

from the wall?

A. 2.54 m

B. 2.25 m

C. 2.08 m

D. 2.86 m

913. Two lamps x and y are hanged at a distance of 20 feet between their centers and 10 feet above

working surface. Lamp x gives 140 cp while lamp y gives 230 cp. At what distance from a point directly

below lamp A on the line joining their centers will the two lamps give equal amount of illumination?

A. 8.22 ft.

B. 8.34 ft.

C. 8.05 ft.

D. 8.72 ft.

914. A 100 cd lamp, which emits light uniformly in all directions, is suspended 2.5 m above the center of

the working table, which is 3 m square. Calculate the illumination at each corner of the table.

A. 29.56 lux

B. 26.63 lux

C. 24.94 lux

D. 28.38 lux
915. A lamp of 500 cd is placed at the center of a room, 20 m x 10m x 5 m. Calculate the illumination in

each corner of the floor.

A. 0.83 lux

B. 0.81 lux

C. 0.78 lux

D. 0.98 lux

916. Four lamps are suspended 6 m above the ground at the corners of a lawn 4 m on each side. If each

lamp emits 250 cd, calculate the illumination at the center of the lawn.

A. 20.56 lux

B. 22.34 lux

C. 21.62 lux

D. 19.85 lux

917. A lamp of 500 cd power is placed at the center of a room, 20 m x 10 m x 5 m. Calculate the

illumination in a point in the middle of a 10 m wall at a height of 2m from the floor.

A. 4.75 lux

B. 4.98 lux

C. 4.69 lux

D. 4.88 lux

918. Luminates of 2000 lumens output will be installed in a room. The desired illumination is 200 foot-

candle. The coefficient of utilization is 0.45 and maintenance factor is 90 %. Determine the number of

luminaires needed if the size of the room is 120 m^2.

A. 30
 B. 28

C. 32

D. 36

919. A hall 35 m x 20 m is to be provided with a general illumination of 130 lux. If the depreciation factor

is 1.4 and the coefficient of utilization is 0.50, determine the number of fluorescent lamp required.

Assumed luminous efficiency of the fluorescent tube as 50 lumens per watt for 80-watt lamp.

A. 62 lamps

B. 65 lamps

C. 63 lamps

D. 64 lamps

920. A hall 30 m long and 12 m wide is to be illuminated and the illumination required is 50 meter-

candles. Calculate the number of lamps required taking a depreciation factor of 1.3 and utilization

coefficient of 0.5 given that the output of the lamp to be used is rated 100 W, 1615 lumens.

A. 30

B. 29

C. 28

D. 27

921. A room 20 m x 10 m is to be illuminated by eight lamps and the average illumination is to be 50

lumens per square meter. If the utilization factor is 0.48 and depreciation factor 1.2, calculate the mean

spherical power per lamp.

A. 249 cp

B. 255 cp
 C. 235 cp

D. 224 cp

922. It is required to provide an illumination 150 meter-candle in a factory hall 45 m x 15 m. Assume

that the depreciation factor is 0.80, coefficient of utilization is 0.40 and efficiency of the lamp is 20

lumens per watt. Calculate the number of 250 W lamps.

A. 60

B. 62

C. 63

D. 61

923. The illumination of a room is being designed. The data as follows:

Room length = 30 ft Room width =20 ft

Coefficient of utilization = 0.6 Maintenance factor = 70%

Required foot-candle =50 Lumens per lamp = 3300

Watts per lamp = 53 Voltages = 220

Power factor = 75%

What is the total current of the lamp required to satisfy the requirement?

A. 21 A

B. 15 A

C. 7 A

D. 25 A
924. The floor area of a room is 10 meters by 10 meters. The desired illumination level is 150 lux.

Assume the coefficient of utilization is 0.51, the maintenance factor is 0.95 and, in the market, a

fluorescent luminaire provide 1200 lumens output of light. Determine the number of luminaires needed

for the room.

A. 24 lamps

B. 28 lamps

C. 25 lamps

D. 26 lamps

ELECTRICAL POWER PLANTS

Where P = theoretical power of the water turbine (watt)

Q = volume discharge of water (m^3/sec)

W = specific weight of water (9810 N/m^3)

h = head of water (m)

Hp = Qwh/k

Where Hp = theoretical horsepower of water turbine

Note: k = constant factor for conversion

Q W h k

ft^3/sec 62.4 lbs/ft^3 feet 550

ft^3/min 62.4 lbs/ft^3 feet 33000

 m^3/sec 9810 N/m^3 meter 746

m^3/min 9810 N/m^3 meter 44760

SPECIFIC WEIGHT OF WATER TURBINE

Specific speed is the speed of water turbine to generate one horsepower under a head of one foot.

Where specific speed (rpm)

N = actual speed (rpm)

h = head of water (foot)

= theoretical output horsepower of a water turbine

Where

Pout = output power of the generator (watt)

Hpt = power output of the turbine (horsepower)

n1 = turbine efficiency

n2 = generator efficiency

HEAT ENERGY CONVERSION FACTORS

1 calorie = 4.186 joules

 1 Btu = 252 calories

1 kW- hr = 3.6 x 10^6 joules

Where calorie = SI or mks unit of heat energy

BTU ( British Thermal Unit) + English or fps unit of heat energy

Joule = unit of energy in SI unit

Note: In dealing with problems that involve heat rate, amount of cool needed. Cost of production of

energy, etc. use the technique engineering called “CANCELLATION OF UNIT”

Sample problem:

The heat rate of a given coal-fired thermal plant is 12,500 BTU/lb. How many pounds of coal are

needed to generate 1000 kW-hr?

Let: W = weight of coal required

W = 1000 kW-hr

W = 273 lbs

TERMS USED IN PREDICTION OF LOAD

Average load (AL) – the mean of all the demands that have occurred during the day, the month or the

year
  Insert picture

Note: One day has 24 hrs. One month has an average of 30 days while one year has an average of 365

days, unless otherwise specified.

Load Factor (LF) – ratio of the average load (AL) to the peak load (PL)

LF = AL/PL

Note: peak load- highest or biggest load that occurred during the day, the month or the year

Demand Factor (DF) – ration of the peak load (PL) to the connected load (CL)

DF = PL/CL

Note: Connected load – sum of all loads installed or connected to the system

Diversity factor (dF) – ratio of the sum individual peak load (summation of PL) to the peak load of the

entire station (PL station)

dF =summation of PL/PL_station

Note: Station peak load – highest or biggest load served by the station that had occurred during the

day, the month or the year.

Utilization factor (UF) – ration of the peak load of the entire station (PL_station) to the total or onstalled

capacity of the station.

Notes: Installed capacity of the station – sum of the ratings of the generations installed in the station.

Plant Capacity factor ( PCF) – ratio of the annual energy delivered by the station to the rated energy

that the station can generate or produced in a year.

 PCF _year = Annual energy in kW-hr/ Installed capacity in kW x 8760

Note: For one year, unless otherwise specified a standard assumption of 365 days or 8760 hours shall

be used.

Plant use factor (PUF) – Ration of the annual energy delivered by the station to the actual energy that

the station had generated in a year.

PUF_year =Annual energy in kW-hr/ Installed capacity in kW x N

Where N = number of hours the plant or station is in operation in one year

925. A deep well pumps water into an open reservoir at the rate of 100 gpm. The water table is 200 ft

below the output pipe. The system has an overall efficiency of 70%. What shall be the minimum hp of

the pump?

A. 5.3 hp

B. 8.7 hp

C. 12.4 hp

D. 7.2 hp

926. A pump requires 100 hp to move water with a specific gravity of 1.0 at a certain flow rate to a given

elevation. What horsepower does the pump require if the flow rate and elevation conditions are the

same but the fluid pumped has a specific gravity of 0.8?

A. 80 hp

B. 100 hp

C. 60 hp
 D. 120 hp

927. An electric motor is used to pump water from a well 40 ft deep. The amount of water pumped per

hour to the ground level is 237,000 gallons. What is the Hp of the motor assuming there is no power

loss?

A. 43 hp

B. 42 hp

C. 41 hp

D. 40 hp

928. A pump, driven by a 440 V, 3 phase induction motor lifts 1.100 cubic feet of water per minute

against a total head of 100 ft of water. The efficiency of the pump and that of its motor are 0.75 and

0.92 respectively. The power factor of the motor is 0.9. Calculate the cost of operating the pump for 24

hours a day duty when power costs P 0.30 per kW-hr.

A. P 1,723

B. P 2,035

C. P 1,619

D. P 1,905

928. A natural waterfalls, 50 meters high, consistently discharges 1.3 m^3 per second. A mini

hydroelectric plant is to be constructed at the bottom of the waterfalls, conversion efficiency and water

turbine design efficiency of 70%.

A. 401.72

B. 410.55

C. 420.42
 D. 425.10

930. A power plant gets water from a dam from a height of 122.45 m at the rate of 1000 cubic meters

per minute. If the output of the plant is 15,000 kW, what is the plant efficiency?

A. 80 %

B. 70%

C. 75%

D. 65%

931. Calculate the current taken by a motor at 440 V having an efficiency of 90 %. Moreover the motor is

used to drive a pump, which lifts 240,000 kg of water per hour to a height of 30 meters. The pump is

given to be 80 % efficient.

A. 58 A

B. 75 A

C. 83 A

D. 62 A

932. A three-phase motor driven pump at 1,800 rpm is discharging 500 gpm of water at a head of 25

meters. The pump efficiency is 75%. Determine the hp of the motor.

A. 15 hp

B. 12 hp

C. 14 hp

D. 10 hp
933. A hydroelectric station has a turbine efficiency of 80% and a generator efficiency of 85%.

Determine the volume of the water required when delivering a load of 40 MW for 6 hours if its effective

head is 120 m. Water weighs 1200 kg/m^3.

A. 899,424 m^3

B. 945,352 m^3

C. 845,041 m^3

D. 905,412 m^3

934. A hydroelectric power plant is to be constructed. The place has an annual rainfall of 190 cm. the

available catchment area is 250 sq. km with an available head of 30 meters. On the average, only 85 %

of the rainfall can be collected in and 70% of the impounded water is respectively, what will be the

average generated.

A. 2,627.5 kW

B. 1,732.7 kW

C. 1,941.2 kW

D. 2,063.8 kW

935. A 100 MW hydroelectric station is supplying full load for 10 hrs in a day. Calculate the volume of

water, which has been used. Assume effect effective head of the water as 200 m and the overall

efficiency of the station as 80%. Assume 1 m^3 of water = 1000 kg.

A. 2,232,435 m^3

B. 2,293,560 m^3

C. 2,345,456 m^3

D. 2,371,402 m^3
936. A farmer has a small stream on his property, which he thinks might supply enough power to light

his farm load. The stream was found to be flowing at 0.05 m3/sec. The available fall is 5 m. A small

hydraulic turbine and generator will have a combined efficiency of 82%, how many 500-W lamp can be

served by the generator simultaneously?

A. 28 lamps

B. 32 lamps

C. 36 lamps

D. 30 lamps

937. A waterfall is 60 meters high. It discharges at a constant rate of 1.0 cubic meter per second. A mini-

hydro electric plant is to be constructed below the waterfalls. The turbine efficiency is 80% and the

generator efficiency is 95%. Calculate the kW output of the generator.

A. 447.34 kW

B. 464.22 kW

C. 457.27 kW

D. 471.30 kW

938. Maria Cristina falls located at south has a height of 100 meters, it discharges at constant rate 2.5

m3/sec. National Power corporation has construct a hydroelectric plant below the water falls. If the

turbine efficiency is 70% and generator efficiency is 90%, calculate the annual energy in kW-hr, if the

discharge rate is constant throughout the year. Assume specific gravity constant.

A. 13,534,857

B. 13,467, 546

C. 13,655,654

D. 13,504,231
939. A natural waterfall, 50 meter high, consistently discharges 1.3 m3 per second. A mini hydroelectric

plant is to be constructed at the bottom of the waterfalls. Calculate the annual energy kW-hr that can be

generated by the power plant. Assume the turbine and generator efficiencies equal to 70% and 90%

respectively.

A. 3,519,067

B. 3,462,356

C. 3,612,212

D. 3,345,815

940. A water turbine operating at 85% efficiency is under a head of 100 m. if the constant discharge is

1000 gal/sec, evaluate the operating speed of the turbine.

A. 640 rpm

B. 654 rpm

C. 636 rpm

D. 608 rpm

941. A mini hydroelectric power plant is under a head of 275 feet. The turbine efficiency is 0.80. If the

turbine speed is limited to 450 rpm, calculate the generator kW output.

A. 3402

B. 3948

C. 4024

D. 3902

942. A power plant gets water from a dam from a height of 100 meters at the rate of 1000 cubic meters

per minute. If the overall efficiency of the plant is 75%, what is the kW output of the plant?
 A. 7,550 kW

B. 15,250 kW

C. 12,250 kW

D. 5,250 kW

943. A power plant consumes 100,000 pounds of coals per hour. The heating value of the coal is 12,000

BTU per pound. The overall plant efficiency is 30%. What is the kW output of the plant?

A. 105,500 kW

B. 205,000 kW

C. 142,500 kW

D. 175,000 kW

944. A power plant has a fuel consumption of 1 pound per kW-hr generated. Determined the heating

value of the fuel used in BTU per pound. The overall efficiency of the plant is 36%.

A. 10,000

B. 9,500

C. 9,800

D. 10,050

945. A certain coal-fired power plant has a heat rate of 2.88 x 10 6 calories per kW-hr. Coal cost P 2,500

per ton. How much is the fuel cost component of producing one kW-hr? Assume the heating value of

coal used equal to 13,000 BTU/lb.

A. P 2.50

B. P 1.75

C. P 1.00
 D. P 1.25

946. A 100 MW thermal plant has an overall efficiency of 34%. If the coal used has a heating value of

10,800 BTU per pound, calculate the coal consumption of the plant per kW-hr output.

A. 0.84 lb

B. 0.96 lb

C. 0.89 lb

D. 0.93 lb

947. A coal power plant has an overall plant efficiency of 82%. Coal with a heating value of 12,000 BTU

per pound cost P 1.50 per pound. What is the fuel cost pf producing one kW-hr?

A. P 1.90

B. P 1.52

C. P 1.75

D. P 1.62

948. A power plant has an overall efficiency of 30%. If this plant can consumed 4200 kilograms of coal

per hour, estimate the total electric energy produced in one day? Assume the calorific value of the coal

being used is 8000 kcal kilogram.

A. 183 MW-hr

B. 168 MW-hr

C. 155 MW-hr

D. 176 MW-hr
949. A plant has a total operating capacity of 800 kW. The coal consumption is 1900 lbs per hour.

Heating value of coal is 9,500 BTU per lb. What approximate percent of the heat in the coal is converted

into useful energy?

A. 12.3

B. 15.0

C. 8.7

D. 17.5

950. A 100 MW coal fired power plant has an average heat rate of 9500 BTU per kW-hr. The plant load

factor is 75%. The heating value of the coal is 12,000 BTU per pound. Calculate the amount of coal usage

for one day.

A. 1.425 x 106 pound

B. 2.235 x 106 pound

C. 2.235 x 105 pound

D. 1.862 x 106 pound

951. A diesel generator set burns diesel with a heating value of 18,000 BTU per pound. The diesel engine

has an efficient of 30% and the alternator has an efficiency of 95%. Determine the fuel cost component

of producing one kW-hr if diesel costs P 2.80 per pound.

A. P 0.15

B. P 3.28

C. P 2.15

D. P 1.86
952. A diesel generating unit supplies a load at 70 kW. The heating value of the oil is 12,000 kcal per kg.

If the overall efficiency of the unit is 40%, determine the mass of oil required per hour.

A. 11.8 kg

B. 10.3 kg

C. 12.5kg

D. 9.67 kg

953. A 500 kW electric lighting cost P 1000 per kw installed. Fixed charges are 14%, operating cost is P

1.50 per kW-hr. The plant averages 150 kW for 5000 hrs of the year, 420 kW for 1000 hrs and 20 kW for

the remainder. What is the unit cost production of electric energy?

A. P 1.96

B. P 1.84

C. P 2.15

D. P 2.05

954. A coal fired power plant with 3000 kW rated capacity costs P 15,000 per kW installed. Annual

operating cost P 12 million; annual maintenance cost P 8 million; annual depreciation P 15 million;

interest on investment per year 8% and cost of coal P 800 per ton. If one pound of coal is needed to

generate 1 kW-hr, find the total annual cost to operate the plant. Plant capacity factor is 50%

A. P 46.45 million

B. P 43.38 million

C. P 40.28 million

D. P 42.32 million
955. To produce one kW-hr, a power plant burns 0.9 lb of coal with a heating value of 13,000 BTU. What

is the heat rate of the plant?

A. 6,250 BTU/kW-hr

B. 9,550 BTU/kW-hr

C. 11,700 BTU/kW-hr

D. 8,700 BUT/kW-hr

956. The current loads of four circuits are as follows:

Circuit No.1 = 25 amperes

Circuit No.2 = 38 amperes

Circuit No.3 = 18 amperes

Circuit No.4 = 45 amperes

If the diversity factor is 1.5, what is the minimum ampacity of the feeder conductor?

A. 126 A

B. 189 A

C. 84 A

D. 152 A

957. The power customer has four feeder circuits of 220 V, three-phase. The circuits have maximum

demand as follows:

Circuit No.1 = 35 A

Circuit No.2 = 46 A

Circuit No.3 = 72 A
 Circuit No.4 = 57 A

The diversity factor is 1.5, determine the maximum kVA demand with the customer.

A. 46

B. 26.5

C. 80

D. 53

958. A substation transformer is to serving the following loads:

Classification Total load Demand factor

Lighting 300 kW 60%

Power 1200 kW 80%

Heating 500 kW 90%

If the diversity factor among the load types is 1.5, determine the maximum demand on the

transformer.

A. 2000 kW

B. 1060 kW

C. 1225 kW

D. 1180 kW

959. The power customer has four circuits of 220 V, three-phase. The circuits having maximum demand

as follows:

Circuit No.1 = 35 A
 Circuit No.2 = 46 A

Circuit No.3 = 72 A

Circuit No.4 = 57 A

The diversity factor is 1.5 A, the load factor is 50%, and the power factor is 80%. What is the

approximate kW demand of the customer?

A. 15 kW

B. 43 kW

C. 21 kW

D. 53 kW

960. An industrial plant has an aggregate load of 100 kW. The demand factor is 60%. If the average total

energy consumption of the plant in one year is 186 MW-hr, what is the yearly load factor of the plant?

A. 32.45%

B. 42.25%

C. 38.67%

D. 35.39%

961. A power plant has two 75 MW generator sets each operating at 7200 hours per year and a 50 MW

generator set operating at 3000 hours per year. If the plant output is 800 x 10 6 kW-hr per year, solve for

the plant factor.

A. 63.4%

B. 65.0%

C. 68.3%

D. 70.6%
962. The average weekly energy generated by a thermal plant is 7,000, 000 kW-hr. The peak load of the

plant is 75,000 kW during the week. If the plant has an installed capacity of 100 MW solve for the load

factor of the plant.

A. 48.92%

B. 56.34%

C. 50.44%

D. 55.55%

963. A certain power plant has reserve capacity above the peak load of 10 MW. The annual factors are

load factor = 59%, capacity factor = 41% and use factor 46%. Determine installed capacity.

A. 33.45 MW

B. 31.85 MW

C. 32.77 MW

D. 30.47 MW

964. A certain power plant has reserve capacity above the peak load of MW. The annual factors are load

factor = 59%, capacity factor = 41% and use factor = 46%. Determine hours per year not in service.

A. 952 hours

B. 965 hours

C. 924 hours

D. 937 hours

965. A central generating station has an annual factor report as follows:

Plant capacity factor = 50%

Load factor = 60%

 Use factor = 45%

Reserved factor = 10,500 kW

Determine the rated capacity of the station.

A. 63,000 kW

B. 60,000 kW

C. 65,000 kW

D. 70,000 kW

966. A 55,000 kW thermal plant of National Power Corporation delivers an annual output of

238,000,000 kW-hr with a peak load of 44 MW. What is the capacity factor?

A. 49.45

B. 42.4%

C. 48.2%

D. 44.6%

967. A thermal power plant has two generating sets rated 600 kW and 800 kW respectively being

operated and rated capacity. The total coal consumption is 680 kg per hour. If the coal has a heating

value of 20,000 joules per gram, what fraction of heat produced from the coal is converted into useful

electrical energy?

A. 37.06%

B. 40.20%

C. 33.67%

D. 38.28%

968. The metering of a power customer was read and gave the following data.
 kW-hr = 200,000

kVAR-hr = 180,000

Maximum demand = 380 kW

Billing days = 30

What is the load factor?

A. 68%

B. 73%

C. 80%

D. 62%

969. An electric truck is propelled by a DC motor driven by a 110-V storage battery. The truck is required

to exert a tractive effort of 220 lb at speed of 5 mph. The overall efficiency of the motor and drive is 70

percent. What current is taken from the battery?

A. 25.24 A

B. 28.45 A

C. 30.22 A

D. 26.18 A

970. An electric motor driven conveyor belt 80 feet long is required to take 2,200 lbs of dirt, rocks, etc

per minute from an excavation site and raise it 15 ft vertically. If all friction in the machinery is

neglected, what hp of motor is required?

A. 1.5

B. 1.0
 C. 2.0

D. 2.5

971. An electric motor is needed to drive an escalator in a department store. The escalator is 36 in wide

and accommodate two (2) rider side by side hence the loading can be considered as uniformly

distributed with 250 lb/ft. Linear speed is 80 ft/min. The escalator angle is 38 and its lifting height is 6.5

meters. Mechanical efficiency of the system is 60%. Determine the motor size in hp.

A. 21.53

B. 22.01

C. 19.42

D. 20.84

972. An electric lift is required to raise a load of 5 tonne through a height of 30 m. One quarter of the

electrical energy supplied to the lift is lost in the motor and gearing. If the time required raising the load

is 27 minutes find the current taken by the motor, the supply voltage being 230 V DC.

A. 4.83 A

B. 3.42 A

C. 5.26 A

D. 6.05 A

973. A conveyor belt of length 15-m is 35˚ with respect to the ground or horizontal. It can hold 4,000 kg

of ore over its total length and it travels the distance of its length in 30 seconds. Calculate the power

rating of the motor in kW that drives the conveyor belt.

A. 10.50 kW

B. 11.25 kW
 C. 13.58 kW

D. 12.75 kW

974. What is the work in ergs needed to raise a 10-gram weight 100-m up?

A. 4.9 x105

B. 98 x 107

C. 9.8 x 10 7

D. 1.96 x 107

975. An electric lift makes 120 double journeys in a day and a load of 6 tonnes is raised to a height of

100 m in a one and a half minutes. In the return journey, the cage of the lift is empty and it’s completes

the journey, the cage is 600 kg and the counter weight is 3 tonnes. Calculate the horsepower of the

motor. Assume the efficiency of the lift to be 80%.

A. 64.24 hp

B. 65.75 hp

C. 58.70 hp

D. 70.43 hp

976. The power required by a plane flying at 545 km/hr is 1800 kW. Determine the average resisting

force in Newtons.

A. 11, 890

B. 12,420

C. 11,520

D. 12,670
977. A train weighing 1600 tons is pulled up a 2% grade by 600 hp. Train resistance is 19200 lbs. What is

the speed in mph?

A. 22

B. 25

C. 32

D. 28

978. A DC series motor operates a crane at normal voltage and lifts a load of 2-tonne at 50 m/min.

Determine the speed at which it will lift a load of 5-tonne.

A. 30 m/min

B. 20 m/min

C. 25 m/min

D. 28 m/min

979. How long could a 1000-ph motor be operated in the heat energy liberated by 1 cubic kilometer of

ocean water when the temperature of the water is lowered by 1 ˚C if all its heat were converted to

mechanical energy?

A. 170 yrs

B. 177 yrs

C. 182 yrs

D. 188 yrs

980. Calculate the minimum rms HP required of an open type electric motor which operates at 15 hp

load for 8 minutes, 10 hp load for 6 minutes, 20 hp load for 6 minutes and the motor is at rest for 12

minutes after which the cycle is repeated.

 A. 15.00

B. 12.25

C. 10.32

D. 16.75

981. A transformer is designed to carry 30 times its rated current for 1 second. The length of time that a

current of 20 times the rated current can be allowed to flow is

A. 0.67 sec

B. 2 sec

C. 1.5 sec

D. 2.25 sec

982. A three-phase motor draws 50 A of current at full load. What shall be the maximum inverse-time

circuit breaker that maybe used for short circuit protection?

A. 50 A

B. 100 A

C. 125 A

D. 75 A

983. A synchronous condenser costs P 1000 per kVA. If a consumer is charged at P 625 per annum per

kVA of maximum demand and the interest and depreciation charges are 10% on the capital invested,

determine his most economical operating power factor. The power factor of the consumer load is 0.80

lagging. Assume no losses on the synchronous condenser.

A. 0.998

B. 0.988
 C. 0.989

D. 0.986

984. In a group of 3 motors, one draw 15 A, the other 40 A and third 52 A. What size of conductor in

terms of ampacity must be used for the feeder circuit?

A. 120 A

B. 107 A

C. 134 A

D. 160 A

985. Given the following three-phase induction motors operating at full load.

15-hp, 220 V, 0.95 eff., 0.80 pf

25-hp, 220 V, 0.90 eff., 0.707 pf

20-hp, 220 V, 0.92 eff., 0.866 pf

Determine the ampacity of the feeder circuit conductors supplying these motors.

A. 178.46 A

B. 183.93 A

C. 164.70 A

D. 205.07 A

986. A single-phase motor has rated full load current of 28 amperes. How large must be the ampacity of

the fuses to be used?

A. 35 A

B. 42 A
 C. 70 A

D. 84 A

987. What surge arrester’s nominal rating shall you recommend to protect distribution transformer in a

34.5 kV grounded system?

A. 34.5 kV

B. 30 kV

C. 22 kV

D. 27 kV

988. An induction motor is equipped with a flywheel of moment of inertia of 4 kg-m2 for driving a rolling

mill. If the speed of the induction motor is 1000 rmp, what extra energy the flywheel is capable of

supplying when the load comes to the motor?

A. 22 kJ

B. 20 kJ

C. 28 kJ

D. 32 kJ

989. A three-phase, 220 V, 60 Hz induction motor drives a fan which provides 40 m 3/sec air

requirements to a furnace. Assume fan efficiency of 60% and 150 mm power factor is 80% and 70%

respectively.

A. 460 A

B. 474 A

C. 482 A

D. 442 A
990. A ten-year investigation of a river’s potential gave an average water flow of 25 cm per second at

the bottom and 90 cm per second at the surface. The average cross section at the same location is 80 sq.

m. What is the average flow rate in cubic meter per hour?

A. 165,600

B. 46

C. 57,500

D. 2,760

991. A 500 kW electric lighting costs P 1000 per kW installed. Fixed charges are 14%, operating cost is P

1.50 per kW-hr. The plant averages 150 kW for 5000 hrs of the year, 420 kW for 1000 hrs and 20 kW for

the remainder. What is the unit cost of producing electric energy?

A. P 2.10

B. P 1.96

C. P 2.01

D. P 1.82

992. If the power gain in a circuit is 20 decibels, what is the actual ration of output to input power?

A. 200

B. 100

C. 20

D. 10

993. If 20 decibels were power losses, what is the power output to power input ratio?

A. 0.05

B. 0.01
 C. 10

D. 5

994. What is the output of a 27-dB gain amplifier whose input power is 25 µW?

A. 12.52 mW

B. 11.24 mW

C. 15.62 mW

D. 14.05 mW

995. Is it desired to deposit a thickness of 1 mm of nickel on the surface of a worn steel pin 10 inches

long and 4 inches in diameter. The available current is 50 A. The electromechanical equivalent if nickel is

0.00038 gm/coulomb and its relative density is 8.9 Calculate the time required.

A. 11.32 hrs

B. 12.65 hrs

C. 10.08 hrs

D. 9.55 hrs

996. The use of electricity for melting a snow in a driveway 10 ft wide by 30 ft long is being considered.

At 0.20 cents a kilowatt-hour, what would be the cost of melting 6 inches of snow? Assume the

following data: specific weight of snow, 10 lb per cu. ft, efficiency of operation, 50%.

A. P 20.25

B. P 25.35

C. P 28.40

D. P 30.63
997. A car is being self started against a resisting torque of 60N-m and at each start the engine is

cranked at 75 rpm for 8 seconds. For each start the energy is drawn from a lead acid accumulator. If the

fully charge battery has a capacity of 100 wh per charge, calculate the number of starts that can be

made with such a battery. Assume an overall efficiency of the motor and gears as 25%

A. 26

B. 25

C. 20

D. 23

998. In an electric heater, the inlet temperature is 15 ˚C. Water is flowing at the rate of 300 grams per

minute. The voltmeter measuring voltage across the heating elements reads 120 volts and an ammeter

measuring current taken reads 10 A. When steady state is finally reached, what is the final reading of

the outlet thermometer?

A. 72.6 ˚C

B. 81.2 ˚C

C. 75.3 ˚C

D. 78.8 ˚C

999. A 230 volts is supplied to an electric soldering machine which draws a current of 0.8 A, fifty-five

(55%) percent of the heat generated is lost on heating other metal parts of the machine and in radiation.

The copper soldering tip weight 150 grams.

Melting point of solder – 300˚C

Ambient temperature – 15 ˚C

Specific heat of copper – 0.094 cal/g-˚C

 Density of copper – 8.9 g.cc

Determine the time elapsed after switching on the machine before the soldering tip is heated to the

melting point of solder and the machine ready for use.

A. 3.05 min

B. 2.26 min

C. 3.37 min

D. 4.24 min

1000. A room measures 6 m x 6 m x 4 m. The air in i1t has to be renewed twice an hour and it is to be

maintained at least 15 ˚C above the incoming air temperature. Find the capacity of the heater assuming

a loss of 10% of the heat. Assume air density as 12.8 x 10 -4 grams per cubic cm and specific heat of air as

0.24 cal/g-˚C.

A. 1706 W

B. 1545 W

C. 1734 W

D. 1621 W

1001. A foundation 30 ft long, 12 ft wide and 9 ft deep is to be composed of a 1:2:4 concrete. How much

gravel in cubic yards will be required?

A. 150

B. 106

C. 110

D. 100